A special cloth for keeping LiF(Mg,Cu,P)TL dosimetry elements is worn by examinees. The exposures of 128 examinees .received upper G.I.T (gastro-intestinal tram) X-ray examination are measured. The reference point of ...A special cloth for keeping LiF(Mg,Cu,P)TL dosimetry elements is worn by examinees. The exposures of 128 examinees .received upper G.I.T (gastro-intestinal tram) X-ray examination are measured. The reference point of the maximum body surface exposure given is at the middle of stomach. The average of this point is (4.97±1.94) × 10-4C.kg-1 person-1 examination-1 and (1.33±0.28)×10-4C.kg-1.min-1.展开更多
Spectral and structural characteristics of distributed Bragg reflector (DBR) in vertical-cavity surface-emitting lasers were studied with photoluminescence and double-crystal X-ray diffraction measurement.The expected...Spectral and structural characteristics of distributed Bragg reflector (DBR) in vertical-cavity surface-emitting lasers were studied with photoluminescence and double-crystal X-ray diffraction measurement.The expected high quality epitaxial DBR structure was verified.In the X-ray double-crystal rocking curves of DBR the zeroth-order peak,the first and second order satellite peaks were measured.Splitting of diffraction peak appeared in the rocking curves was analyzed.The effects of introduced deep energy levels on the structural perfection and optical properties were discussed.展开更多
The development of the recrystallization texture of the alloy AA3104 was investigated by analysis of orientation distribution functions determined by X-ray diffraction,supported by EBSD local texture analysis.A typic...The development of the recrystallization texture of the alloy AA3104 was investigated by analysis of orientation distribution functions determined by X-ray diffraction,supported by EBSD local texture analysis.A typical β-fiber with nearly 20%Bs orientation {011}211 was detected in the final hot rolled sheet.At the beginning of annealing at 350 ℃,the cube component{001}100 got a sharp increase.TEM results show that the growth of both number and size of precipitation appears to inhibit the advantage of Cube orientation {001}100 notably after annealing at 350 ℃ for 15 min.Finally,it comes out to be a random distributed orientation by full recry stallization.展开更多
Interventions of metal complexes in the area of metallopharrneceutical and polymer sciences play a great economic importance to human challenges. Complexation behavior of some artemisinin derivatives with late transit...Interventions of metal complexes in the area of metallopharrneceutical and polymer sciences play a great economic importance to human challenges. Complexation behavior of some artemisinin derivatives with late transition metals and chromium-benzoimidazoylpyridine analogues have been investigated. The Fe（Ⅲ）, Zn（Ⅱ） and Cd（Ⅱ） complexes of artesunate and artemether and that of chromium-benzimidazoyl pyridine were synthesized with molar ratio of metal to ligand between 1：1 and 1：2. Structural elucidation using X-ray analysis and other characterization of the complexes （AAS, IR, UV, E.A, NMR） were carried out to explore the coordination affinity of them viz-a viz bonding, geometries and elemental composition. The IR absorption revealed that artesunate acts as monodentate specie through carbonyl group on coordination. However, its bidentate mode was also observed with carboxylic group acting as C=O and C-O bonding when deprotonation happened. Artemether （L2） was synthesized using artesunate and its structure was confirmed by single crystal X-ray crystallography as well as its Zn（Ⅱ） complex exhibiting a square planar geometry. A series of 2-benzoimidazoylpyridine derivates （L3-L6） and their chromium complexes were synthesized and characterized. In the presence of methylaluminoxane （MAO）, all chromium complexes show good activity for ethylene oligomerization and polymerization whereas with diethylaluminium chloride （Et2AlCl2） the complexes show moderate activity. The distribution of oligomers obtained follows Schulz- Flory rules with high selectivity for α-olefins. The combined productivity （meaning both activities of ethylene oligomerization and polymerization） are improved with increasing ethylene pressure. The results show that the reaction conditions greatly affect the properties of the polymer such as molecular weight distribution and melting point（Tm） with extremely broad molecular weight distributions. With elevating reaction temperature from 0 to 60 ℃, the melting point （Tin） of resultant polyethylene decreased rapidly from 134 ℃ to 70 ℃.展开更多
Different physical, mechanical and chemical processes, such as： ion implantation, oxidation, nitridation and others create on the surface of materials residual stress state, characterized by high level and strong gra...Different physical, mechanical and chemical processes, such as： ion implantation, oxidation, nitridation and others create on the surface of materials residual stress state, characterized by high level and strong gradient. X-ray diffraction method widely used for stress measurements has some difficulties in interpretation of experimental data, when the depth of X-ray penetration is compared with thickness of surface layer where inhomogeneous stress distribution is localized. Early it has been shown by authors that diffraction line broadening occurs when analyzed surface is characterized by strong gradient. The interest to study the diffraction line broadening is connected to the possibility of obtaining information about parameters of surface stress distribution. In the present paper the convolution and deconvolution concepts of Fourier analysis were applied to study X ray diffraction line broadening caused by surface stress gradients. Developed methodology allows determining of stress distribution in superficial layers of materials.展开更多
文摘A special cloth for keeping LiF(Mg,Cu,P)TL dosimetry elements is worn by examinees. The exposures of 128 examinees .received upper G.I.T (gastro-intestinal tram) X-ray examination are measured. The reference point of the maximum body surface exposure given is at the middle of stomach. The average of this point is (4.97±1.94) × 10-4C.kg-1 person-1 examination-1 and (1.33±0.28)×10-4C.kg-1.min-1.
文摘Spectral and structural characteristics of distributed Bragg reflector (DBR) in vertical-cavity surface-emitting lasers were studied with photoluminescence and double-crystal X-ray diffraction measurement.The expected high quality epitaxial DBR structure was verified.In the X-ray double-crystal rocking curves of DBR the zeroth-order peak,the first and second order satellite peaks were measured.Splitting of diffraction peak appeared in the rocking curves was analyzed.The effects of introduced deep energy levels on the structural perfection and optical properties were discussed.
文摘The development of the recrystallization texture of the alloy AA3104 was investigated by analysis of orientation distribution functions determined by X-ray diffraction,supported by EBSD local texture analysis.A typical β-fiber with nearly 20%Bs orientation {011}211 was detected in the final hot rolled sheet.At the beginning of annealing at 350 ℃,the cube component{001}100 got a sharp increase.TEM results show that the growth of both number and size of precipitation appears to inhibit the advantage of Cube orientation {001}100 notably after annealing at 350 ℃ for 15 min.Finally,it comes out to be a random distributed orientation by full recry stallization.
文摘Interventions of metal complexes in the area of metallopharrneceutical and polymer sciences play a great economic importance to human challenges. Complexation behavior of some artemisinin derivatives with late transition metals and chromium-benzoimidazoylpyridine analogues have been investigated. The Fe（Ⅲ）, Zn（Ⅱ） and Cd（Ⅱ） complexes of artesunate and artemether and that of chromium-benzimidazoyl pyridine were synthesized with molar ratio of metal to ligand between 1：1 and 1：2. Structural elucidation using X-ray analysis and other characterization of the complexes （AAS, IR, UV, E.A, NMR） were carried out to explore the coordination affinity of them viz-a viz bonding, geometries and elemental composition. The IR absorption revealed that artesunate acts as monodentate specie through carbonyl group on coordination. However, its bidentate mode was also observed with carboxylic group acting as C=O and C-O bonding when deprotonation happened. Artemether （L2） was synthesized using artesunate and its structure was confirmed by single crystal X-ray crystallography as well as its Zn（Ⅱ） complex exhibiting a square planar geometry. A series of 2-benzoimidazoylpyridine derivates （L3-L6） and their chromium complexes were synthesized and characterized. In the presence of methylaluminoxane （MAO）, all chromium complexes show good activity for ethylene oligomerization and polymerization whereas with diethylaluminium chloride （Et2AlCl2） the complexes show moderate activity. The distribution of oligomers obtained follows Schulz- Flory rules with high selectivity for α-olefins. The combined productivity （meaning both activities of ethylene oligomerization and polymerization） are improved with increasing ethylene pressure. The results show that the reaction conditions greatly affect the properties of the polymer such as molecular weight distribution and melting point（Tm） with extremely broad molecular weight distributions. With elevating reaction temperature from 0 to 60 ℃, the melting point （Tin） of resultant polyethylene decreased rapidly from 134 ℃ to 70 ℃.
文摘Different physical, mechanical and chemical processes, such as： ion implantation, oxidation, nitridation and others create on the surface of materials residual stress state, characterized by high level and strong gradient. X-ray diffraction method widely used for stress measurements has some difficulties in interpretation of experimental data, when the depth of X-ray penetration is compared with thickness of surface layer where inhomogeneous stress distribution is localized. Early it has been shown by authors that diffraction line broadening occurs when analyzed surface is characterized by strong gradient. The interest to study the diffraction line broadening is connected to the possibility of obtaining information about parameters of surface stress distribution. In the present paper the convolution and deconvolution concepts of Fourier analysis were applied to study X ray diffraction line broadening caused by surface stress gradients. Developed methodology allows determining of stress distribution in superficial layers of materials.
