SiC nanowires/pyrocarbon(SiCnws/PyC)core-shell structure toughenedC/C-ZrC-SiC composites were fabricated by CLVD process,and the influences of PyC shell thickness on the microstructure and ablation resistance of the c...SiC nanowires/pyrocarbon(SiCnws/PyC)core-shell structure toughenedC/C-ZrC-SiC composites were fabricated by CLVD process,and the influences of PyC shell thickness on the microstructure and ablation resistance of the composites were researched.The results presented that SiCnws/PyC core-shell structure had a linear shape,and the composites became dense with the increasing PyC thickness.When the thickness of PyC shell increased from 0 to 2.4μm,the density and thermal conductivity of the composites was improved gradually,but the coefficient of thermal expansion(CTE)decreased firstly and then increased.After the ablation test for 90 s,the ablation rates of the composites decreased continuously as the PyC thickness increased from 0 to 1.4μm,but increased when the PyC thickness was up to 2.4μm.Especially when the PyC thickness was 1.4μm,the linear and mass ablation rates of the composites were 71.25%and 63.01%lower than those of the composites without PyC shell.The reasons behind the remarkable improvement of anti-ablation property were that the proper PyC thickness could alleviate the CTE mismatch to promote the formation of complete oxide coating,improve the thermal conductivity to reduce heat corrosion and enhance the capability to limit the mechanical erosion.展开更多
In this paper,a high-yield Hf-modified SiHfBOC ceramic precursor was developed,and a high-pressure assisted impregnation pyrolysis method was proposed to achieve the preparation of 3D PyC–Cf/SiHfBOC composites.This h...In this paper,a high-yield Hf-modified SiHfBOC ceramic precursor was developed,and a high-pressure assisted impregnation pyrolysis method was proposed to achieve the preparation of 3D PyC–Cf/SiHfBOC composites.This high-pressure assisted impregnation method significantly improves impregnation filling effect of the precursor in and between fiber bundles compared to dozens of traditional impregnation cycles.After undergoing just 9 precursor infiltration pyrolysis(PIP)cycles,the composites achieved relative density of approximately 90%and density of 1.64 g/cm^(3).The critical temperature difference of the 3D PyC–Cf/SiHfBOC composites after the shock of room temperature(RT)–1000℃is as high as 650℃,which is twice that of traditional ceramic materials,showing good thermal shock resistance.Under the effect of Hf modification,a dense HfO_(2)–SiO_(2)oxide layer(thickness of 93μm)was formed in situ on the surface of the 3D PyC–Cf/SiHfBOC composites,effectively preventing further erosion of the composite matrix by high-temperature oxidation gas.Even in the ultra-high-temperature oxygen-containing environment at 1800℃,it still exhibits an excellent non-ablative result(with a linear ablation rate of 0.83×10^(−4)mm/s).This work not only enriches the basic research on lightweight ultra-high-temperature ceramic composites converted from Hf ceramic precursors,but also provides strong technical support for their applications in ultra-high-temperature non-ablative thermal protection materials for high-speed aircraft.展开更多
To efficiently decrease ablation heat accumulation and improve the ability of ZrC-SiC/TaC coatings to protect carbon/carbon(C/C)composites,a thermally conductive nanonetwork with a ceramic@carbon core-shell structure ...To efficiently decrease ablation heat accumulation and improve the ability of ZrC-SiC/TaC coatings to protect carbon/carbon(C/C)composites,a thermally conductive nanonetwork with a ceramic@carbon core-shell structure was designed and constructed.Polymer-derived SiC/TaC with a graphene carbon shell was synthesized and introduced into a ZrC coating by supersonic atmospheric plasma spraying(SAPS).Graphene shell paths increased the heat transfer capability by lowering the surface temperature to approximately 200℃during oxyacetylene ablation.The heat dissipation of the graphene shell in the ZrC-SiC/TaC@C coating reduced the volatilization of low-melting-point phases and delayed the sintering of ZrO_(2) particles.Thus,the graphene shell in ZrC-SiC/TaC@C coating decreased the mass and linear ablation rates by 91.4%and 93.7%compared to ZrC-SiC/TaC coating,respectively.This work provided a constructive idea for improving the ablation resistance of the coatings by incorporating carbon nanomaterials as a function of heat dissipation.展开更多
Carbon materials(graphite or C/C composites)are widely used in aerospace applications due to their unique performance advantages,including low density,high specific strength and low coefficients of thermal expansion.H...Carbon materials(graphite or C/C composites)are widely used in aerospace applications due to their unique performance advantages,including low density,high specific strength and low coefficients of thermal expansion.However,carbon materials are highly susceptible to destructive oxidation in high-temperature oxygen-containing environments,limiting their application scope and service life.Coating technology is an effective approach for solving the above problem,and ceramic coatings are the most widely used protective system.In this review,the latest research progress regarding different types of silicon carbide-based antioxidation and anti-ablation ceramic coatings on the surfaces of carbon materials is described,and the protective properties and mechanism analysis of the SiC and modified SiC coatings by ultrahigh-temperature ceramic borides,carbides,silicides and other reinforcements are elucidated.In addition,the current main challenges of ceramic coatings are carefully analysed,and the perspectives for the future development of ceramic protection coatings are also discussed.展开更多
In this work,C_(f)/(CrZrHfNbTa)C-SiC high-entropy ceramic matrix composites with good load-bearing,elec-tromagnetic shielding and ablation resistance were designed and reported for the first time.The compos-ites were ...In this work,C_(f)/(CrZrHfNbTa)C-SiC high-entropy ceramic matrix composites with good load-bearing,elec-tromagnetic shielding and ablation resistance were designed and reported for the first time.The compos-ites were fabricated by an efficient combined processing of slurry infiltration lamination(SIL)and precur-sor infiltration and pyrolysis(PIP).Density and porosity of the as-fabricated composites are 2.72 g/cm^(3) and 12.44 vol.%,respectively,and the flexural strength is 185±13 MPa.Due to the carbon fiber rein-forcement with high conductivity and strong reflection,and high-entropy(CrZrHfNbTa)C ceramic matrix with strong absorbability,the total Electromagnetic interference shielding efficiency(SET)of the compos-ites with a thickness of 3 mm are as high as 88.2 dB and 90 dB respectively in X-band and Ku-band.This means that higher than 99.999999%electromagnetic shielding is achieved at 8-18 GHz,showing excel-lent electromagnetic shielding performance.The C_(f)/(CrZrHfNbTa)C-SiC composites also present excellent ablation resistance,with the linear and mass ablation rates of 0.9μm/s and 1.82 mg/s after ablation at the heat flux of 5 MW/m^(2) for 300 s(∼2450℃).This work opens a new insight for the synergistic de-sign of structural and functional integrated materials with load-bearing,electromagnetic shielding and ablation resistance,etc.展开更多
Multicomponent ultra-high temperature ceramics(UHTCs)are promising candidates for thermal protection materials(TPMs)used in aerospace field.However,finding out desirable compositions from an enormous number of possibl...Multicomponent ultra-high temperature ceramics(UHTCs)are promising candidates for thermal protection materials(TPMs)used in aerospace field.However,finding out desirable compositions from an enormous number of possible compositions remains challenging.Here,through elucidating the role of preferential oxidation in ablation behavior of multicomponent UHTCs via the thermodynamic analysis and experimental verification,the correlation between the composition and ablation performance of multicomponent UHTCs was revealed from the aspect of thermodynamics.We found that the metal components in UHTCs can be thermodynamically divided into preferentially oxidized component(denoted as MP),which builds up a skeleton in oxide layer,and laggingly oxidized component(denoted as ML),which fills the oxide skeleton.Meanwhile,a thermodynamically driven gradient in the concentration of MP and ML forms in the oxide layer.Based on these findings,a strategy for pre-evaluating the ablation performance of multicomponent UHTCs was developed,which provides a preliminary basis for the composition design of multicomponent UHTCs.展开更多
The ablation behaviour of(Hf-Ta-Zr-Nb)C high entropy carbide(HEC4)was studied at temperatures above 2100℃using a plasma flame gun in air.The microstructures,phase and chemical compositions of the HEC4 samples were in...The ablation behaviour of(Hf-Ta-Zr-Nb)C high entropy carbide(HEC4)was studied at temperatures above 2100℃using a plasma flame gun in air.The microstructures,phase and chemical compositions of the HEC4 samples were investigated after ablation.The mass ablation rate of the HEC4 samples increased with increasing ablation time from 0.21 mg cm^(−2)s^(−1)for 60 s to 0.45 mg cm^(−2)s^(−1)for 120 s.Com-pared to the mono-and binary carbides with commonly decreased mass and thickness after ablation,the HEC4 samples with the increased mass and thickness after ablation showed good resistance to mechan-ical scouring at such high temperatures and an oxidation controlled ablation mechanism.The ablation processes mainly include the oxidation of the carbide,the phase separation of the oxides,the melting of oxides,and the diffusion of oxygen.A composition gradient in the oxide layer was detected due to the different melting temperatures of the different oxides;Nb-Ta rich oxides formed at the front surface melted and became enriched at the edge of the samples,and the Zr-Hf rich oxides were enriched in the centre of the samples.The oxide layer with complex compositions and phase distributions acted as an effective ablation barrier.展开更多
To improve the uniformity and the content of HfBin Hf B-Si-based ceramic coating and alleviate the damage of substrate,and then enhance the high-temperature(1700°C)oxidation and cyclic ablation resistances of car...To improve the uniformity and the content of HfBin Hf B-Si-based ceramic coating and alleviate the damage of substrate,and then enhance the high-temperature(1700°C)oxidation and cyclic ablation resistances of carbon/carbon composites,a close-knit double layer HfB_(2)-SiC/SiC coatings with a mosaic structure and high content of HfBwere prepared by a novel dipping-carbonization assisted pack cementation methods(DPC–HS/S).In contrast,a HfB_(2)-SiC/SiC coatings were also fabricated by pack cementation(PC–HS/S).Results revealed that the oxidation and ablation protective performances of the DPC–HS/S coatings were superior to those of PC–HS/S coatings.After 30 thermal cycles between 1500°C and room temperature,the mass gain of the coated sample was 0.78%,and the mass loss was 1.65%after oxidation at 1700°C for 156 h.Moreover,under an oxyacetylene torch ablation for 180 s(3 cycles),the linear ablation rate of the DPC–HS/S coated specimen was 1.62μm/s,which was much lower than that of PC–HS/S coated specimen(3.08μm/s).展开更多
High-density carbon/carbon(C/C)composite plays a critical role in the aerospace industry owing to excellent mechanical properties and resistance to ablation.However,traditional manufacturing relies on pitch precursor ...High-density carbon/carbon(C/C)composite plays a critical role in the aerospace industry owing to excellent mechanical properties and resistance to ablation.However,traditional manufacturing relies on pitch precursor and hot isostatic pressure impregnation and carbonization(HIPIC)technology,which is time-consuming and expensive.In this study,we report an innovative method utilizing polyarylacetylene(PAA)resin and ultra-high pressure impregnation and carbonization(UHPIC)technology.The extremely high char yield of PAA resin(85 wt.%)and high isotropic pressure of UHPIC(over 200 MPa)promote the densification of the composite.As a result,we achieve a high-density(1.90 g/cm^(3))C/C composite with a high degree of graphitization(81%).This composite exhibits impressive properties,including flexural strength of 146 MPa,compressive strength of 187 MPa,and thermal conductivity of 147 W/(m K).When exposed to oxyacetylene flame at 3000 K for 100 s,it displays minimal linear ablation,with a rate of 1.27×10^(-2)mm/s.This study demonstrates the exceptional graphitizable characteristic of PAA resin,setting it apart from conventional resins.Our time-saving and cost-effective approach holds significant promise for aerospace applications,particularly in harsh aerodynamic heating environments.展开更多
Carbon/carbon(C/C)composites have been acknowledged as potential candidates in aerospace vehicles,but their oxygen sensitivity still remains an enormous challenge.In this work,a novel multilayer coating consisted of H...Carbon/carbon(C/C)composites have been acknowledged as potential candidates in aerospace vehicles,but their oxygen sensitivity still remains an enormous challenge.In this work,a novel multilayer coating consisted of HfC-2.5 mol.%Hf_(6)Ta_(2)O_(17),HfC-40 mol.%SiC,HfC-2.5 mol.%Hf_(6)Ta_(2)O_(17) and HfC-60 mol.%SiC sublayers from surface to inside was designed and fabricated on the surface of C/C composites with sharp leading edge by plasma spraying.Its ablation resistance was assessed using oxyacetylene torch with a maximum temperature over 2300℃ and compared with monolayered coatings.The multilayer coating revealed preferable ablation retardation capacity evidenced by its integrated profile and less flaw quantity.Such benefits were primarily stemmed from the effective structural design and rational material selection.The former was able to reduce the thermal stress within the ablated scale,the latter contributed to rising the high-temperature resistance and oxygen barrier ability of the coating.展开更多
Ultra-high temperature ceramic(UHTC)nanowires are potential reinforcement materials due to it combines the perfect properties of bulk materials and unique geometric properties of one-dimensional(1D)nanostructures.Thus...Ultra-high temperature ceramic(UHTC)nanowires are potential reinforcement materials due to it combines the perfect properties of bulk materials and unique geometric properties of one-dimensional(1D)nanostructures.Thus,developing 1D nanomaterials that have excellent morphology and structure retention in ultra-high temperature environments is of prime importance to bring their outstanding performance into full play.Herein,we report the novel solid solution((Hf_(0.5)Ta_(0.5))C)ceramic nanowires,which could not only maintain morphological and structural stability at 1900°C but also exhibit 1D nanostructures under oxyacetylene scouring and ablation at 2300°C.The morphology evolution of nanowires obeys the Rayleigh instability mechanism,and the internal structure and element distribution of nanowires remain unchanged even if the surface atoms are rearranged.The fascinating nanowires are demonstrated to have great potential as ideal reinforcement materials of composite materials and toughening phases of ceramics that are applied in ultra-high temperature environments,as well as excellent performance enhancement phases of functional materials.Our work may provide new insights into the development of ceramic nanowires and widen their applications.展开更多
基金financial support of the project from the National Natural Science Foundation of China(No.51821091 and 51872233)the Research Foundation of Chengdu University of Technology(No.10912-KYQD202008264)。
文摘SiC nanowires/pyrocarbon(SiCnws/PyC)core-shell structure toughenedC/C-ZrC-SiC composites were fabricated by CLVD process,and the influences of PyC shell thickness on the microstructure and ablation resistance of the composites were researched.The results presented that SiCnws/PyC core-shell structure had a linear shape,and the composites became dense with the increasing PyC thickness.When the thickness of PyC shell increased from 0 to 2.4μm,the density and thermal conductivity of the composites was improved gradually,but the coefficient of thermal expansion(CTE)decreased firstly and then increased.After the ablation test for 90 s,the ablation rates of the composites decreased continuously as the PyC thickness increased from 0 to 1.4μm,but increased when the PyC thickness was up to 2.4μm.Especially when the PyC thickness was 1.4μm,the linear and mass ablation rates of the composites were 71.25%and 63.01%lower than those of the composites without PyC shell.The reasons behind the remarkable improvement of anti-ablation property were that the proper PyC thickness could alleviate the CTE mismatch to promote the formation of complete oxide coating,improve the thermal conductivity to reduce heat corrosion and enhance the capability to limit the mechanical erosion.
基金the National Natural Science Foundation of China(No.52032003)National Natural Science Foundation of China(Nos.51972082,52102093,and 52172041)+1 种基金Postdoctoral Research Foundation of China(No.2021M690817)the Science Foundation of National Key Laboratoryof Science and Technology on Advanced Composites in Special Environments.
文摘In this paper,a high-yield Hf-modified SiHfBOC ceramic precursor was developed,and a high-pressure assisted impregnation pyrolysis method was proposed to achieve the preparation of 3D PyC–Cf/SiHfBOC composites.This high-pressure assisted impregnation method significantly improves impregnation filling effect of the precursor in and between fiber bundles compared to dozens of traditional impregnation cycles.After undergoing just 9 precursor infiltration pyrolysis(PIP)cycles,the composites achieved relative density of approximately 90%and density of 1.64 g/cm^(3).The critical temperature difference of the 3D PyC–Cf/SiHfBOC composites after the shock of room temperature(RT)–1000℃is as high as 650℃,which is twice that of traditional ceramic materials,showing good thermal shock resistance.Under the effect of Hf modification,a dense HfO_(2)–SiO_(2)oxide layer(thickness of 93μm)was formed in situ on the surface of the 3D PyC–Cf/SiHfBOC composites,effectively preventing further erosion of the composite matrix by high-temperature oxidation gas.Even in the ultra-high-temperature oxygen-containing environment at 1800℃,it still exhibits an excellent non-ablative result(with a linear ablation rate of 0.83×10^(−4)mm/s).This work not only enriches the basic research on lightweight ultra-high-temperature ceramic composites converted from Hf ceramic precursors,but also provides strong technical support for their applications in ultra-high-temperature non-ablative thermal protection materials for high-speed aircraft.
基金supported by the National Key R&D Program of China(Nos.2022YFB3708600 and 2021YFA0715802)the National Natural Science Foundation of China(No.52101098)+4 种基金the Aeronautical Science Foundation of China(No.2022Z055053004)the Fund of Key Laboratory of National Defense Science and Technology(No.WDZC20235250505)the National Science and Technology Major Project(No.J2022-VI0011-0042)the National Basic Scientific Research(No.JCKY2021607B035)Innovation Foundation for Doctor Dissertation of Northwestern Polytechnical University(No.CX2024006).
文摘To efficiently decrease ablation heat accumulation and improve the ability of ZrC-SiC/TaC coatings to protect carbon/carbon(C/C)composites,a thermally conductive nanonetwork with a ceramic@carbon core-shell structure was designed and constructed.Polymer-derived SiC/TaC with a graphene carbon shell was synthesized and introduced into a ZrC coating by supersonic atmospheric plasma spraying(SAPS).Graphene shell paths increased the heat transfer capability by lowering the surface temperature to approximately 200℃during oxyacetylene ablation.The heat dissipation of the graphene shell in the ZrC-SiC/TaC@C coating reduced the volatilization of low-melting-point phases and delayed the sintering of ZrO_(2) particles.Thus,the graphene shell in ZrC-SiC/TaC@C coating decreased the mass and linear ablation rates by 91.4%and 93.7%compared to ZrC-SiC/TaC coating,respectively.This work provided a constructive idea for improving the ablation resistance of the coatings by incorporating carbon nanomaterials as a function of heat dissipation.
基金supported by the“Jie Bang Gua Shuai”of Science and technology Projects of Liaoning Province in 2021,grant number 2021JH1/10400091Liao Ning Revitalization Talents Program,grant number XLYC2005002+3 种基金Liaoning BaiQianWan Talents Program,grant number[2020]78Scientific Research Funding Project of the Educational Department of Liaoning Province in 2020,grant number LZ2020002Shenyang Science and Technology Program-Major Key Core Technology Project,grant number 20-202-1-15Provincial Doctoral Research Initiation Fund Program,grant number 2021-BS-187.
文摘Carbon materials(graphite or C/C composites)are widely used in aerospace applications due to their unique performance advantages,including low density,high specific strength and low coefficients of thermal expansion.However,carbon materials are highly susceptible to destructive oxidation in high-temperature oxygen-containing environments,limiting their application scope and service life.Coating technology is an effective approach for solving the above problem,and ceramic coatings are the most widely used protective system.In this review,the latest research progress regarding different types of silicon carbide-based antioxidation and anti-ablation ceramic coatings on the surfaces of carbon materials is described,and the protective properties and mechanism analysis of the SiC and modified SiC coatings by ultrahigh-temperature ceramic borides,carbides,silicides and other reinforcements are elucidated.In addition,the current main challenges of ceramic coatings are carefully analysed,and the perspectives for the future development of ceramic protection coatings are also discussed.
基金supported by the National Key R&D Program of China(no.2022YFB3707700)Program of Shang-hai Academic/Technology Research Leader(no.23XD1424300)National Natural Science Foundation of China(no.52332003).
文摘In this work,C_(f)/(CrZrHfNbTa)C-SiC high-entropy ceramic matrix composites with good load-bearing,elec-tromagnetic shielding and ablation resistance were designed and reported for the first time.The compos-ites were fabricated by an efficient combined processing of slurry infiltration lamination(SIL)and precur-sor infiltration and pyrolysis(PIP).Density and porosity of the as-fabricated composites are 2.72 g/cm^(3) and 12.44 vol.%,respectively,and the flexural strength is 185±13 MPa.Due to the carbon fiber rein-forcement with high conductivity and strong reflection,and high-entropy(CrZrHfNbTa)C ceramic matrix with strong absorbability,the total Electromagnetic interference shielding efficiency(SET)of the compos-ites with a thickness of 3 mm are as high as 88.2 dB and 90 dB respectively in X-band and Ku-band.This means that higher than 99.999999%electromagnetic shielding is achieved at 8-18 GHz,showing excel-lent electromagnetic shielding performance.The C_(f)/(CrZrHfNbTa)C-SiC composites also present excellent ablation resistance,with the linear and mass ablation rates of 0.9μm/s and 1.82 mg/s after ablation at the heat flux of 5 MW/m^(2) for 300 s(∼2450℃).This work opens a new insight for the synergistic de-sign of structural and functional integrated materials with load-bearing,electromagnetic shielding and ablation resistance,etc.
基金supported by the National Natural Science Foundation of China(52072410 and 51602349)Innovation-driven Project of Central South University.
文摘Multicomponent ultra-high temperature ceramics(UHTCs)are promising candidates for thermal protection materials(TPMs)used in aerospace field.However,finding out desirable compositions from an enormous number of possible compositions remains challenging.Here,through elucidating the role of preferential oxidation in ablation behavior of multicomponent UHTCs via the thermodynamic analysis and experimental verification,the correlation between the composition and ablation performance of multicomponent UHTCs was revealed from the aspect of thermodynamics.We found that the metal components in UHTCs can be thermodynamically divided into preferentially oxidized component(denoted as MP),which builds up a skeleton in oxide layer,and laggingly oxidized component(denoted as ML),which fills the oxide skeleton.Meanwhile,a thermodynamically driven gradient in the concentration of MP and ML forms in the oxide layer.Based on these findings,a strategy for pre-evaluating the ablation performance of multicomponent UHTCs was developed,which provides a preliminary basis for the composition design of multicomponent UHTCs.
基金financially supported by the National Natural Science Foundation of China (Nos. 51602325, 91960102, and 51572224)the Natural Science Foundation of Shanghai (No.20ZR1465400)+1 种基金111 Project (No. BP0820014)financial support from China Scholarship Council
文摘The ablation behaviour of(Hf-Ta-Zr-Nb)C high entropy carbide(HEC4)was studied at temperatures above 2100℃using a plasma flame gun in air.The microstructures,phase and chemical compositions of the HEC4 samples were investigated after ablation.The mass ablation rate of the HEC4 samples increased with increasing ablation time from 0.21 mg cm^(−2)s^(−1)for 60 s to 0.45 mg cm^(−2)s^(−1)for 120 s.Com-pared to the mono-and binary carbides with commonly decreased mass and thickness after ablation,the HEC4 samples with the increased mass and thickness after ablation showed good resistance to mechan-ical scouring at such high temperatures and an oxidation controlled ablation mechanism.The ablation processes mainly include the oxidation of the carbide,the phase separation of the oxides,the melting of oxides,and the diffusion of oxygen.A composition gradient in the oxide layer was detected due to the different melting temperatures of the different oxides;Nb-Ta rich oxides formed at the front surface melted and became enriched at the edge of the samples,and the Zr-Hf rich oxides were enriched in the centre of the samples.The oxide layer with complex compositions and phase distributions acted as an effective ablation barrier.
基金financially supported by the National Natural Science Foundation of China(Nos.51872239,52061135102,52002321)the Creative Research Foundation of Science and Technology on Thermostructural Composite Materials Laboratory(No.5050200015)+1 种基金the Fundamental Research Funds for the Central Universities(No.G2020KY05125)the Xi’an Association for Science and Technology"Young Talent Support Project"(No.095920211338)。
文摘To improve the uniformity and the content of HfBin Hf B-Si-based ceramic coating and alleviate the damage of substrate,and then enhance the high-temperature(1700°C)oxidation and cyclic ablation resistances of carbon/carbon composites,a close-knit double layer HfB_(2)-SiC/SiC coatings with a mosaic structure and high content of HfBwere prepared by a novel dipping-carbonization assisted pack cementation methods(DPC–HS/S).In contrast,a HfB_(2)-SiC/SiC coatings were also fabricated by pack cementation(PC–HS/S).Results revealed that the oxidation and ablation protective performances of the DPC–HS/S coatings were superior to those of PC–HS/S coatings.After 30 thermal cycles between 1500°C and room temperature,the mass gain of the coated sample was 0.78%,and the mass loss was 1.65%after oxidation at 1700°C for 156 h.Moreover,under an oxyacetylene torch ablation for 180 s(3 cycles),the linear ablation rate of the DPC–HS/S coated specimen was 1.62μm/s,which was much lower than that of PC–HS/S coated specimen(3.08μm/s).
基金supported by the Major Program of National Natural Science Foundation of China(No.52293372).
文摘High-density carbon/carbon(C/C)composite plays a critical role in the aerospace industry owing to excellent mechanical properties and resistance to ablation.However,traditional manufacturing relies on pitch precursor and hot isostatic pressure impregnation and carbonization(HIPIC)technology,which is time-consuming and expensive.In this study,we report an innovative method utilizing polyarylacetylene(PAA)resin and ultra-high pressure impregnation and carbonization(UHPIC)technology.The extremely high char yield of PAA resin(85 wt.%)and high isotropic pressure of UHPIC(over 200 MPa)promote the densification of the composite.As a result,we achieve a high-density(1.90 g/cm^(3))C/C composite with a high degree of graphitization(81%).This composite exhibits impressive properties,including flexural strength of 146 MPa,compressive strength of 187 MPa,and thermal conductivity of 147 W/(m K).When exposed to oxyacetylene flame at 3000 K for 100 s,it displays minimal linear ablation,with a rate of 1.27×10^(-2)mm/s.This study demonstrates the exceptional graphitizable characteristic of PAA resin,setting it apart from conventional resins.Our time-saving and cost-effective approach holds significant promise for aerospace applications,particularly in harsh aerodynamic heating environments.
基金supported by the Innovation Foundation for Doctor Dissertation of Northwestern Polytechnical University (No.CX2021006)the National Natural Science Foundation of China (Nos.91860203,51727804,and 52130205)+1 种基金the Fundamental Research Funds for the Central Universities (No.3102019TS0409)Creative Research Foundation of Science and Technology on Thermo-structural Composite Materials Laboratory.
文摘Carbon/carbon(C/C)composites have been acknowledged as potential candidates in aerospace vehicles,but their oxygen sensitivity still remains an enormous challenge.In this work,a novel multilayer coating consisted of HfC-2.5 mol.%Hf_(6)Ta_(2)O_(17),HfC-40 mol.%SiC,HfC-2.5 mol.%Hf_(6)Ta_(2)O_(17) and HfC-60 mol.%SiC sublayers from surface to inside was designed and fabricated on the surface of C/C composites with sharp leading edge by plasma spraying.Its ablation resistance was assessed using oxyacetylene torch with a maximum temperature over 2300℃ and compared with monolayered coatings.The multilayer coating revealed preferable ablation retardation capacity evidenced by its integrated profile and less flaw quantity.Such benefits were primarily stemmed from the effective structural design and rational material selection.The former was able to reduce the thermal stress within the ablated scale,the latter contributed to rising the high-temperature resistance and oxygen barrier ability of the coating.
基金supported by the National Natural Science Foundation of China(Nos.52130205 and 51727804)the National Key R&D Program of China(No.2021YFA0715803)Innovation Foundation for Doctor Dissertation of Northwestern Polytechnical University(CX2022010).
文摘Ultra-high temperature ceramic(UHTC)nanowires are potential reinforcement materials due to it combines the perfect properties of bulk materials and unique geometric properties of one-dimensional(1D)nanostructures.Thus,developing 1D nanomaterials that have excellent morphology and structure retention in ultra-high temperature environments is of prime importance to bring their outstanding performance into full play.Herein,we report the novel solid solution((Hf_(0.5)Ta_(0.5))C)ceramic nanowires,which could not only maintain morphological and structural stability at 1900°C but also exhibit 1D nanostructures under oxyacetylene scouring and ablation at 2300°C.The morphology evolution of nanowires obeys the Rayleigh instability mechanism,and the internal structure and element distribution of nanowires remain unchanged even if the surface atoms are rearranged.The fascinating nanowires are demonstrated to have great potential as ideal reinforcement materials of composite materials and toughening phases of ceramics that are applied in ultra-high temperature environments,as well as excellent performance enhancement phases of functional materials.Our work may provide new insights into the development of ceramic nanowires and widen their applications.
