Acetylene is produced from the reaction between calcium carbide(CaC_(2))and water,while the production of CaC_(2) generates significant amount of carbon dioxide not only because it is an energy-intensive process but a...Acetylene is produced from the reaction between calcium carbide(CaC_(2))and water,while the production of CaC_(2) generates significant amount of carbon dioxide not only because it is an energy-intensive process but also the raw material for CaC_(2) synthesis is from coal.Here,a comprehensive biomass-to-acetylene process was constructed that integrated several units including biomass pyrolysis,oxygen-thermal CaC_(2) fabrication and calcium looping.For comparison,a coal-to-acetylene process was also established by using coal as feedstock.The carbon efficiency,energy efficiency and environmental impacts of the bio-based calcium carbide acetylene(BCCA)and coal-based calcium carbide acetylene(CCCA)processes were systematically analyzed.Moreover,the environmental impacts were further evaluated by applying thermal integration at system level and energy substitution in CaC_(2) furnace.Even though the BCCA process showed lower carbon efficiency and energy efficiency than that of the CCCA process,life cycle assessment demonstrated the BCCA(1.873 kgCO_(2eq) kg-prod^(-1))a lower carbon footprint process which is 0.366 kgCO_(2eq) kg-prod^(-1) lower compared to the CCCA process.With sustainable energy(biomass power)substitution in CaC_(2) furnace,an even lower GWP value of 1.377 kgCO_(2eq) kg-prod^(-1) can be achieved in BCCA process.This work performed a systematic analysis on integrating biomass into industrial acetylene production,and revealed the positive role of biomass as raw material(carbon)and energy supplier.展开更多
A series of model catalysts were obtained by treating commercial fresh and spent catalysts unloaded from the factory with different methods, including green oil dipping, extraction and high-temperature regeneration;fi...A series of model catalysts were obtained by treating commercial fresh and spent catalysts unloaded from the factory with different methods, including green oil dipping, extraction and high-temperature regeneration;finally, the deactivation behavior of the commercial catalyst for acetylene hydrogenation were studied. The influence of various possible deactivation factors on the catalytic performance was elucidated via detailed structural characterization, surface composition analysis, and activity evaluation.The results showed that green oil, carbon deposit and sintering of active metal were the main reasons for deactivation, among which green oil and carbon deposit led to rapid deactivation, while the activity could be recovered after regeneration by high-temperature calcination. The sintering of active metal components was attributed to the high-temperature regeneration in hydrothermal conditions, which was slow but irreversible and accounted for permanent deactivation. Thus, optimizing the regeneration is expected to extend the service life of the commercial catalyst.展开更多
The development of environmentally friendly catalysts has become a top priority for acetylene hydrochlorination.However,difficulties remain in systematic studies on the applicability of kinetic models for the industri...The development of environmentally friendly catalysts has become a top priority for acetylene hydrochlorination.However,difficulties remain in systematic studies on the applicability of kinetic models for the industrialization of Cu-based catalysts.Therefore,a strategy involving reactor modeling,parameter estimation,and model testing is developed to evaluate the predictive ability of kinetic models.In order to search for reliable and widely applicable reaction kinetic models for Cu-based catalysts,a case study is conducted.Multiple possible kinetic models derived from the power law,adsorption mechanism,and reaction path are sifted through collecting and testing activity data from tens of Cu-based catalysts.Different optimum applicable ranges of these kinetic models are presented.According to the comparative analysis on their applications in various industrial scenarios,this research suggests that kinetic models derived from reaction path exhibits the best extrapolation ability and has the greatest potential for application in the scale-up design of reactors.展开更多
The selective removal of trace acetylene in ethylene feed gas is of great significance in the petrochemicalindustry;however, there are still challenges in designing and developing high-performance catalysts. Here, a M...The selective removal of trace acetylene in ethylene feed gas is of great significance in the petrochemicalindustry;however, there are still challenges in designing and developing high-performance catalysts. Here, a MOFassistedencapsulation strategy was adopted for the precise synthesis of diatomic Pd2 sites on a ZnO support. When usedfor the acetylene semi-hydrogenation reaction, the dual-atom Pd2-ZnO catalyst exhibited improved catalytic performance,achieving complete conversion of acetylene at 125 °C with an 89% selectivity to ethene, as compared to Pd single-atom andnanoparticles. This enhancement was mainly attributed to the catalyst’s ability to dissociate H2 and facilitate the desorptionof intermediate C2H4. Moreover, the strong interaction between the support and the diatomic Pd sites was responsible for thecatalyst’s excellent stability during the long-term reaction.展开更多
Rational design of catalytic sites to activate the C≡C bond is of paramount importance to advance acetylene hydrochlorination. Herein, Cu sites with electron-rich and electron-deficient states were constructed by con...Rational design of catalytic sites to activate the C≡C bond is of paramount importance to advance acetylene hydrochlorination. Herein, Cu sites with electron-rich and electron-deficient states were constructed by controlling the impregnation solutions. The π electrons flowing from acetylene to Cu site are facilitated over the electron-deficient Cu sites, achieving high activation of C≡C bond. The contradiction between the increased activation of acetylene required for enhanced catalytic activity and the resistance of Cu site to reduction by acetylene required for maintaining catalytic stability can be balanced by establishing strong interactions of Cu site with pyrrolic-N species. The catalytic activity displays a volcano shape scaling relationship as a function of Cu particle size. Tribasic copper chloride is concomitantly generated with the construction of electron-deficient Cu sites. The H–Cl bond of HCl can be activated over the tribasic copper chloride, accelerating the surface reaction of vinyl chloride production. This strategy of inducing electron deficiency provides new insight into the rational design of catalysts for the synthesis of vinyl chloride with a high catalytic performance.展开更多
This work aims to solve the problems of low reaction activity of Cu-based catalysts and agglomeration of active centers in acetylene hydrochlorination.Cu-based catalysts supported by NAP co-doped activated carbon(AC)w...This work aims to solve the problems of low reaction activity of Cu-based catalysts and agglomeration of active centers in acetylene hydrochlorination.Cu-based catalysts supported by NAP co-doped activated carbon(AC)with different content(mCu-xNP/AC)were manufactured and applied in the acetylene hydrochlorination reaction.It was found that the doping of carriers N and P induced the transformation of Cu^(2+)to Cu^(+),and the catalytic activity was markedly improved.Under the optimal reaction temperature of 220℃,the gas hourly space velocity(GHSV)of C_(2)H_(2)was 90 h^(-1)and V_(HCl):V_(C_(2)H_(2))was 1.15.The initial activity of the 5%Cu-30 NP/AC catalyst reached 95.59%.Through some characterization methods showed the addition of N and P improved the dispersion of Cu in carbon,which increased the ratio of Cu^+/Cu^(2+).The measurement results confirmed that the chemisorption capacity of mCu-xNP/AC for C_(2)H_(2)decreased slightly,and the chemisorption capacity for HCl increased significantly,which was the reason for the increased activity of the catalyst.The conclusion provides a reference for the development of acetylene hydrochlorination Cu catalyst.展开更多
In this work,DFT calculations were used firstly to simulate the nitrogen coordinated metal single-atom catalysts(M-N_(x)SACs,M=Hg,Cu,Au,and Ru) to predict their catalytic activities in acetylene hydrochlorination.The ...In this work,DFT calculations were used firstly to simulate the nitrogen coordinated metal single-atom catalysts(M-N_(x)SACs,M=Hg,Cu,Au,and Ru) to predict their catalytic activities in acetylene hydrochlorination.The DFT results showed that Ru-N_(x)SACs had the best catalytic performance among the four catalysts,and Ru-N_(x)SACs could effectively inhibit the reduction of ruthenium cation.To verify the DFT results,Ru-N_(x)SACs were fabricated by pyrolyzing MOFs in-situ spatially confined metal precursors.The N coordination environment could be controlled by changing the pyrolysis temperature.Catalytic performance tests indicated that low N coordination number(Ru-N_(2),Ru-N_(3))exhibited excellent catalytic activity and stability compared to RuCl_(3)catalyst.DFT calculations further revealed that Ru-N_(2)and Ru-N_(3)had a tendency to activate HCl at the first step of reaction,whereas Ru-N4tended to activate C_(2)H_(2).These findings will serve as a reference for the design and control of metal active sites.展开更多
This article presents simulation results on the effects of neutral gas flow for nanoparticle transport in atmospheric-pressure,radio-frequency,capacitively-coupled,and acetylene discharge.The acetylene gas is set to f...This article presents simulation results on the effects of neutral gas flow for nanoparticle transport in atmospheric-pressure,radio-frequency,capacitively-coupled,and acetylene discharge.The acetylene gas is set to flow into the chamber from the upper showerhead electrode.The internal energy of the gas medium therein is transferred into kinetic energy so the gas advection can be triggered.This is represented by the pressure volume work term of the gas energy converse equation.The gas advection leads to the gas temperature sink at the gas inlet,hence a large gas temperature gradient is formed.The thermophoresis relies on the gas temperature gradient,and causes the profile of nanoparticle density to vary from a double-peak structure to a single-peak one.The gas advection influences the properties of electron density and temperature as well and causes the drift-ambipolar mode profile of electron density asymmetric.In the bulk region,i.e.away from the inlet,the gas advection is more like one isovolumetric compression,which slightly increases the temperature of the gas medium at consuming its kinetic energy.展开更多
Nitrogen‐doped ordered mesoporous carbon （N‐OMC） catalysts were directly synthesized using SBA‐15 as a hard template and sucrose as a carbon source. Urea, which was used as the nitrogen source, was carbonized wit...Nitrogen‐doped ordered mesoporous carbon （N‐OMC） catalysts were directly synthesized using SBA‐15 as a hard template and sucrose as a carbon source. Urea, which was used as the nitrogen source, was carbonized with sucrose. A 3.6 wt% nitrogen doping of the carbon framework was achieved, with more than 70%of the nitrogen incorporated as quaternary nitrogen species. Only 0.2 wt% nitrogen doping, with only 32.7% quaternary nitrogen incorporation was obtained in an N‐OMC catalyst （N‐OMC‐T） prepared using a two‐step post‐synthesis method. The acetylene hy‐drochlorination activities of N‐OMC catalysts prepared via the one‐step method were higher than that of the N‐OMC‐T catalyst because of the higher nitrogen loadings.展开更多
A La-modified Al2O3 catalyst was prepared with deposition-precipitation method. The effect of calcination temperature on the reactivity for vapor phase hydrofluorination of acetylene to vinyl fluoride. The catalysts c...A La-modified Al2O3 catalyst was prepared with deposition-precipitation method. The effect of calcination temperature on the reactivity for vapor phase hydrofluorination of acetylene to vinyl fluoride. The catalysts calcined at different temperatures were characterized using NH3-TPD, pyridine-FTIR, X-ray diffraction, and Raman techniques. It was found that the calcination process could not only change the structure of these catalysts but also modify the amount of surface acidity on the catalysts. The catalyst calcined at 400 ℃ exhibited the highest conversion of acetylene （94.6%） and highest selectivity to vinyl fluoride （83.4%） and lower coke deposition selectivity （0.72%）. The highest activity was related to the largest amount of surface acidity on the catalyst, and the coke deposition was also related to the total amount of surface acidic sites.展开更多
In the process of dimerization of acetylene to produce monovinylacetylene （MVA）,the loss of active component CuCl in the Nieuwland catalyst due to the formation of a dark red precipitate was investigated.The formula...In the process of dimerization of acetylene to produce monovinylacetylene （MVA）,the loss of active component CuCl in the Nieuwland catalyst due to the formation of a dark red precipitate was investigated.The formula of the precipitate was CuCl·2C2H2·1/5NH 3,and it was presumed to be formed by the combination of NH 3,C2H2 and [Cu]-acetylene π-complex,which was an intermediate in the dimerization reaction.The addition of hydrochloric acid into the catalyst can reduce the formation of precipitate,whereas excessive H＋ is unfavorable to the dimerization reaction of acetylene.To balance between high acetylene conversion and low loss rate of CuCl,the optimum mass percentage of HCl in the added hydrochloric acid was determined.The result showed the optimum mass percentage of HCl decreased from 5.0% to 3.2% when the space velocity of acetylene was from 140 h-1 to 360 h-1.The result in this work also indicated the pH of the Nieuwland catalyst should be kept in the range of 5.80-5.97 during the reaction process,which was good for both catalyst life and acetylene conversion.展开更多
A clay-like conductive material comprising polyaniline（PANI）-acetylene black particles is fabricated as a hole conductor for dye sensitized solar cell（DSSC）.The results show that the introduction of acetylene blac...A clay-like conductive material comprising polyaniline（PANI）-acetylene black particles is fabricated as a hole conductor for dye sensitized solar cell（DSSC）.The results show that the introduction of acetylene black into the polymer electrolyte improves the photovoltaic behavior of solid-state DSSC,owing to the increase of the hole mobility of PANI electrolyte,the improvement of the wetting quality of the composite electrolyte,and the reinforcement of interface contact between electrode and the electrolyte.Finally,the overall energy conversion efficiency of DSSC with PANI-50%（in weight）acetylene black electrolyte is 48% of that of liquid DSSC.Therefore,the PANI-acetylene black composition is a credible alternative to hole conductor in application of solid DSSC.展开更多
The heterogeneity of active sites is the main obstacle for selectivity control in heterogeneous catalysis.Single atom catalysts（SACs） with homogeneous isolated active sites are highly desired in chemoselective trans...The heterogeneity of active sites is the main obstacle for selectivity control in heterogeneous catalysis.Single atom catalysts（SACs） with homogeneous isolated active sites are highly desired in chemoselective transformations. In this work, a Pd1/ZnO catalyst with single‐atom dispersion of Pd active sites was achieved by decreasing the Pd loading and reducing the sample at a relatively low temperature. The Pd1/ZnO SAC exhibited excellent catalytic performance in the chemoselective hydrogenation of acetylene with comparable chemoselectivity to that of PdZn intermetallic catalysts and a greatly enhanced utilization of Pd metal. Such unusual behaviors of the Pd1/ZnO SAC in acetylene semi‐hydrogenation were ascribed to the high‐valent single Pd active sites, which could promote electrostatic interactions with acetylene but restrain undesired ethylene hydrogenation via the spatial restrictions of σ‐chemical bonding toward ethylene.展开更多
In the process of acetylene hydrochlorination,the rapid deactivation of supported gold(Au)catalysts by acetylene is still a huge challenge.Here,we provide an innovative strategy for constructing an acetylene–deficien...In the process of acetylene hydrochlorination,the rapid deactivation of supported gold(Au)catalysts by acetylene is still a huge challenge.Here,we provide an innovative strategy for constructing an acetylene–deficient reaction phase on the active site by coating an ionic liquid film on the Au(H2O)/C surface.The reactant ratio of C2H2 to HCl in this acetylene–deficient reaction phase is 1:132,in contrast to the 1:1 M ratio in the gas phase,thus boosting the catalytic stability of Au(H2O)/C catalysts.The kinetic and theoretical analysis showed that the reduction of cationic gold by C2H2 and the generation of carbon deposition can be inhibited in this constructed reaction phase during reaction.The current work not only broadens the scope of supported Au catalysts in acetylene hydrochlorination,but also verifies the perspective of the tunability of stoichiometric balance,which can be used in other catalytic applications.展开更多
The effect of solvation on the conformation of acetylene has been studied by adding one water molecule at a time. Quantum chemical calculations of the n＋ （C2H2）（H2O）n （n=1-5） clusters indicate that the H2O mole...The effect of solvation on the conformation of acetylene has been studied by adding one water molecule at a time. Quantum chemical calculations of the n＋ （C2H2）（H2O）n （n=1-5） clusters indicate that the H2O molecules prefer to form the OH...Tr interaction rather than the CH...O interaction. This solvation motif is different from that of neutral （C2H2）（H2O）n （n=1-4） clusters, in which the H2O molecules prefer to form the CH...O and OH...C Hbonds. For the H＋（C2H2）（H2O）n cationic clusters, the first solvation shell consists of one ring structure with two OH...Tr H-bonds and three water molecules, which is completed at n=4. Simulated infrared spectra reveal that vibrational frequencies of OH... H-bonded O-H stretching afford a sensitive probe for exploring the solvation of acetylene by protonated water molecules. Infrared spectra of the H＋ （C2H2）（H2O）n （n=1-5） clusters could be readily measured by the infrared photodissociation technique and thus provide useful information for the understanding of solvation processes.展开更多
Pd/C catalysts were prepared by deposited Pd nanoparticles （NPs） on different carbon supports including activated carbon （AC）, graphite oxide （GO）, and reduced graphite oxide （rGO） using sol-immobilization met...Pd/C catalysts were prepared by deposited Pd nanoparticles （NPs） on different carbon supports including activated carbon （AC）, graphite oxide （GO）, and reduced graphite oxide （rGO） using sol-immobilization method. Through transmission electron microscopy, powder X-ray di raction, and X-ray photoelectron spectroscopy, the role of the carbon supports for the catalytic performances of Pd/C catalysts was examined in selective hydrogenation of acetylene. The results indicate that Pd/AC exhibited higher activity and selectivity than Pd/GO and Pd/rGO in the gas phase selective hydrogenation of acetylene. Thermal and chemical treatment of AC supports also have some effect on the catalytic performance of Pd/AC catalysts. The differences in the activity and selectivity of various Pd/C catalysts were partly attributed to the metal-support interaction.展开更多
Commercial production of vinyl chloride from acetylene relies on the use of HgCla as the catalyst, which has caused severe environmental problem and threats to human health because of its toxicity. Therefore, it is vi...Commercial production of vinyl chloride from acetylene relies on the use of HgCla as the catalyst, which has caused severe environmental problem and threats to human health because of its toxicity. Therefore, it is vital to explore alternative catalysts without mercury. We report here that N-doped carbon can catalyze directly transformation of acetylene to vinyl chloride. Particularly, N-doped high surface area mesoporous carbon exhibits a rather high activity with the acetylene conversion reaching 77% and vinyl chloride selectivity above 98% at a space velocity of 1.0 mL.min-l.g-1 and 200 ~C. It delivers a stable performa℃nce within a test period of 100h and no obvious deactivation is observed, demonstrating potentials to substitute the notoriously toxic mercuric chloride catalyst.展开更多
The IB metal(Au,Ag and Cu)alloyed Pd single atom catalysts had been proved to be efficient in promoting the selectivity for hydrogenation of acetylene to ethylene.As a base metal in the same group as Pd,the Ni-based c...The IB metal(Au,Ag and Cu)alloyed Pd single atom catalysts had been proved to be efficient in promoting the selectivity for hydrogenation of acetylene to ethylene.As a base metal in the same group as Pd,the Ni-based catalysts are also active for hydrogenation reactions.Herein,the effects of the IB metals on the Ni/SiO2 catalyst for the selective hydrogenation of acetylene were systematically studied.Different from the Pd/SiO2 catalyst,the monometallic Ni/SiO2 catalyst is not active at low temperatures.The addition of the IB metals to the Ni/SiO2 catalysts can greatly enhance the activity.Besides,the catalytic activity of the AuNix/SiO2 and CuNix/SiO2 catalysts increase with the reduction temperature,while the AgNix/SiO2 catalysts are not sensitive to the pretreatment temperature.The origin of the effect of the different IB metals on the Ni-based catalysts for selective hydrogenation of acetylene is discussed based on the characterizations by XRD,TPR and microcalorimetric measurements.展开更多
Ni/Si O_2 and bimetallic Ni_xGa/SiO_2 catalysts with different Ni/Ga atomic ratios(x = 10～2) were investigated for the selective hydrogenation of acetylene.It was found that Ni_xGa/SiO_2 showed higher selectivity to ...Ni/Si O_2 and bimetallic Ni_xGa/SiO_2 catalysts with different Ni/Ga atomic ratios(x = 10～2) were investigated for the selective hydrogenation of acetylene.It was found that Ni_xGa/SiO_2 showed higher selectivity to ethylene than Ni/Si O_2.This is attributed to the formation Ni-Ga alloy and Ni3 Ga intermetallic compound(IMC) where there was a charge transfer from Ga to Ni,which is favorable for reducing the adsorption strength and amount of ethylene on Ni atoms.As a result,the over-hydrogenation,the C–C bond hydrogenolysis and the polymerization were suppressed,and subsequently the selectivity to ethylene was enhanced.With the decrease of Ni/Ga atomic ratio,the activity and stability of the Ni_xGa/SiO_2 catalysts increased first and then decreased,while the ethylene selectivity tended to increase.Ni_5 Ga/SiO_2 exhibited the best performance.Under the conditions of 180 °C,0.1 MPa,and a reactant(1.0 vol% acetylene,5.0 vol% H_2 and 94 vol% N_2) with the space velocity of 36,000 m L h^(-1) g^(-1),the acetylene conversion maintained at 100% on Ni_5 Ga/SiO_2 during 120 h time on stream and the selectivity to ethylene was 75%～81%after reaction for 68 h.It was also found that the formation of Ni-Ga alloy and Ni_3 Ga IMC suppressed the incorporation of carbon to form NiCx,subsequently enhancing the catalyst stability.Additionally,with increasing the Ga content,the catalyst acid amount and strength tended to increase,which promoted the polymerization and carbon deposition and so the catalyst deactivation.展开更多
Herein,we report an excellent,supported Ru(III)‐ChCl/AC catalyst with lower Ru content,where the ionic complex ChRuCl4 serves as the active component for acetylene hydrochlorination.The prepared heterogeneous Ru‐10%...Herein,we report an excellent,supported Ru(III)‐ChCl/AC catalyst with lower Ru content,where the ionic complex ChRuCl4 serves as the active component for acetylene hydrochlorination.The prepared heterogeneous Ru‐10%ChCl/AC catalyst shows excellent activity and long‐term stability.In this system,ChCl provides an environment for the ChRuCl4 to be stabilized as Ru(III),thus suppressing the reduction of the active species and the aggregation of ruthenium species during the reaction.The interaction between reactants and catalyst species was investigated by catalyst characterizations in combination with DFT calculations to disclose the effect of the ChRuCl4 complex and ChCl on the catalytic performance.This inexpensive,efficient,and long‐term catalyst is a competitive candidate for application in the hydrochlorination industry.展开更多
基金the National Natural Science Foundation of China(21978128,91934302)the State Key Laboratory of Materials-oriented Chemical Engineering(ZK202006)is acknowledged.
文摘Acetylene is produced from the reaction between calcium carbide(CaC_(2))and water,while the production of CaC_(2) generates significant amount of carbon dioxide not only because it is an energy-intensive process but also the raw material for CaC_(2) synthesis is from coal.Here,a comprehensive biomass-to-acetylene process was constructed that integrated several units including biomass pyrolysis,oxygen-thermal CaC_(2) fabrication and calcium looping.For comparison,a coal-to-acetylene process was also established by using coal as feedstock.The carbon efficiency,energy efficiency and environmental impacts of the bio-based calcium carbide acetylene(BCCA)and coal-based calcium carbide acetylene(CCCA)processes were systematically analyzed.Moreover,the environmental impacts were further evaluated by applying thermal integration at system level and energy substitution in CaC_(2) furnace.Even though the BCCA process showed lower carbon efficiency and energy efficiency than that of the CCCA process,life cycle assessment demonstrated the BCCA(1.873 kgCO_(2eq) kg-prod^(-1))a lower carbon footprint process which is 0.366 kgCO_(2eq) kg-prod^(-1) lower compared to the CCCA process.With sustainable energy(biomass power)substitution in CaC_(2) furnace,an even lower GWP value of 1.377 kgCO_(2eq) kg-prod^(-1) can be achieved in BCCA process.This work performed a systematic analysis on integrating biomass into industrial acetylene production,and revealed the positive role of biomass as raw material(carbon)and energy supplier.
基金the financial support from the Sinopec Catalyst Co.Ltd.,China。
文摘A series of model catalysts were obtained by treating commercial fresh and spent catalysts unloaded from the factory with different methods, including green oil dipping, extraction and high-temperature regeneration;finally, the deactivation behavior of the commercial catalyst for acetylene hydrogenation were studied. The influence of various possible deactivation factors on the catalytic performance was elucidated via detailed structural characterization, surface composition analysis, and activity evaluation.The results showed that green oil, carbon deposit and sintering of active metal were the main reasons for deactivation, among which green oil and carbon deposit led to rapid deactivation, while the activity could be recovered after regeneration by high-temperature calcination. The sintering of active metal components was attributed to the high-temperature regeneration in hydrothermal conditions, which was slow but irreversible and accounted for permanent deactivation. Thus, optimizing the regeneration is expected to extend the service life of the commercial catalyst.
基金supported by the National Key Research and Development Program of China(2021YFA1501803)。
文摘The development of environmentally friendly catalysts has become a top priority for acetylene hydrochlorination.However,difficulties remain in systematic studies on the applicability of kinetic models for the industrialization of Cu-based catalysts.Therefore,a strategy involving reactor modeling,parameter estimation,and model testing is developed to evaluate the predictive ability of kinetic models.In order to search for reliable and widely applicable reaction kinetic models for Cu-based catalysts,a case study is conducted.Multiple possible kinetic models derived from the power law,adsorption mechanism,and reaction path are sifted through collecting and testing activity data from tens of Cu-based catalysts.Different optimum applicable ranges of these kinetic models are presented.According to the comparative analysis on their applications in various industrial scenarios,this research suggests that kinetic models derived from reaction path exhibits the best extrapolation ability and has the greatest potential for application in the scale-up design of reactors.
基金the National Natural Science foundation of China(22379053 and 21878127)China Postdoctoral Science Foundation(2022M711358).We also thank Xu Fangping for assistance in HRTEM characterization from the Central Laboratory of School of Chemical and Material Engineering of Jiangnan University.
文摘The selective removal of trace acetylene in ethylene feed gas is of great significance in the petrochemicalindustry;however, there are still challenges in designing and developing high-performance catalysts. Here, a MOFassistedencapsulation strategy was adopted for the precise synthesis of diatomic Pd2 sites on a ZnO support. When usedfor the acetylene semi-hydrogenation reaction, the dual-atom Pd2-ZnO catalyst exhibited improved catalytic performance,achieving complete conversion of acetylene at 125 °C with an 89% selectivity to ethene, as compared to Pd single-atom andnanoparticles. This enhancement was mainly attributed to the catalyst’s ability to dissociate H2 and facilitate the desorptionof intermediate C2H4. Moreover, the strong interaction between the support and the diatomic Pd sites was responsible for thecatalyst’s excellent stability during the long-term reaction.
基金Financial support from the National Natural Science Foundation of China (NSFCgrant No.U20A20119,21606199,22078302,52070035)+3 种基金the Science and Technology Department of Zhejiang Province (LGG20B060004)the China Postdoctoral Science Foundation (2020M671791)the Jilin Province Scientific and the Technological Planning Project of China (No.20200403001SF)the National Key Research and Development Program of China (2021YFA1501800,2021YFA1501801,2021YFA1501802)。
文摘Rational design of catalytic sites to activate the C≡C bond is of paramount importance to advance acetylene hydrochlorination. Herein, Cu sites with electron-rich and electron-deficient states were constructed by controlling the impregnation solutions. The π electrons flowing from acetylene to Cu site are facilitated over the electron-deficient Cu sites, achieving high activation of C≡C bond. The contradiction between the increased activation of acetylene required for enhanced catalytic activity and the resistance of Cu site to reduction by acetylene required for maintaining catalytic stability can be balanced by establishing strong interactions of Cu site with pyrrolic-N species. The catalytic activity displays a volcano shape scaling relationship as a function of Cu particle size. Tribasic copper chloride is concomitantly generated with the construction of electron-deficient Cu sites. The H–Cl bond of HCl can be activated over the tribasic copper chloride, accelerating the surface reaction of vinyl chloride production. This strategy of inducing electron deficiency provides new insight into the rational design of catalysts for the synthesis of vinyl chloride with a high catalytic performance.
基金supported by the Taishan Scholars Program of Shandong Province(tsqn202103051)the Project of Scientific Research in Shihezi University(CXFZ202205)。
文摘This work aims to solve the problems of low reaction activity of Cu-based catalysts and agglomeration of active centers in acetylene hydrochlorination.Cu-based catalysts supported by NAP co-doped activated carbon(AC)with different content(mCu-xNP/AC)were manufactured and applied in the acetylene hydrochlorination reaction.It was found that the doping of carriers N and P induced the transformation of Cu^(2+)to Cu^(+),and the catalytic activity was markedly improved.Under the optimal reaction temperature of 220℃,the gas hourly space velocity(GHSV)of C_(2)H_(2)was 90 h^(-1)and V_(HCl):V_(C_(2)H_(2))was 1.15.The initial activity of the 5%Cu-30 NP/AC catalyst reached 95.59%.Through some characterization methods showed the addition of N and P improved the dispersion of Cu in carbon,which increased the ratio of Cu^+/Cu^(2+).The measurement results confirmed that the chemisorption capacity of mCu-xNP/AC for C_(2)H_(2)decreased slightly,and the chemisorption capacity for HCl increased significantly,which was the reason for the increased activity of the catalyst.The conclusion provides a reference for the development of acetylene hydrochlorination Cu catalyst.
基金supported by the National Natural Science Foundation of China (NSFC,22172082,21978137,22102074,and 21878162)Natural Science Foundation of Tianjin (20JCZDJC00770)+1 种基金Postdoctoral Research Foundation of China (2021M701776)NCC Fund (NCC2020FH05)。
文摘In this work,DFT calculations were used firstly to simulate the nitrogen coordinated metal single-atom catalysts(M-N_(x)SACs,M=Hg,Cu,Au,and Ru) to predict their catalytic activities in acetylene hydrochlorination.The DFT results showed that Ru-N_(x)SACs had the best catalytic performance among the four catalysts,and Ru-N_(x)SACs could effectively inhibit the reduction of ruthenium cation.To verify the DFT results,Ru-N_(x)SACs were fabricated by pyrolyzing MOFs in-situ spatially confined metal precursors.The N coordination environment could be controlled by changing the pyrolysis temperature.Catalytic performance tests indicated that low N coordination number(Ru-N_(2),Ru-N_(3))exhibited excellent catalytic activity and stability compared to RuCl_(3)catalyst.DFT calculations further revealed that Ru-N_(2)and Ru-N_(3)had a tendency to activate HCl at the first step of reaction,whereas Ru-N4tended to activate C_(2)H_(2).These findings will serve as a reference for the design and control of metal active sites.
基金supported by National Natural Science Foundation of China(Nos.11805107 and 12275039)the Fundamental Research Funds in Heilongjiang Provincial Universities of China(No.135509124)the Graduate Innovation Foundation of Qiqihar University(No.YJSCX2022014)。
文摘This article presents simulation results on the effects of neutral gas flow for nanoparticle transport in atmospheric-pressure,radio-frequency,capacitively-coupled,and acetylene discharge.The acetylene gas is set to flow into the chamber from the upper showerhead electrode.The internal energy of the gas medium therein is transferred into kinetic energy so the gas advection can be triggered.This is represented by the pressure volume work term of the gas energy converse equation.The gas advection leads to the gas temperature sink at the gas inlet,hence a large gas temperature gradient is formed.The thermophoresis relies on the gas temperature gradient,and causes the profile of nanoparticle density to vary from a double-peak structure to a single-peak one.The gas advection influences the properties of electron density and temperature as well and causes the drift-ambipolar mode profile of electron density asymmetric.In the bulk region,i.e.away from the inlet,the gas advection is more like one isovolumetric compression,which slightly increases the temperature of the gas medium at consuming its kinetic energy.
基金supported by the National Natural Science Foundation of China (20803064)the Natural Science Foundation of Zhejiang Province (Y4090348)~~
文摘Nitrogen‐doped ordered mesoporous carbon （N‐OMC） catalysts were directly synthesized using SBA‐15 as a hard template and sucrose as a carbon source. Urea, which was used as the nitrogen source, was carbonized with sucrose. A 3.6 wt% nitrogen doping of the carbon framework was achieved, with more than 70%of the nitrogen incorporated as quaternary nitrogen species. Only 0.2 wt% nitrogen doping, with only 32.7% quaternary nitrogen incorporation was obtained in an N‐OMC catalyst （N‐OMC‐T） prepared using a two‐step post‐synthesis method. The acetylene hy‐drochlorination activities of N‐OMC catalysts prepared via the one‐step method were higher than that of the N‐OMC‐T catalyst because of the higher nitrogen loadings.
基金ACKNOWLEDGMENT This work was supported by the National Natural Science Foundation of China （No.20873125）,
文摘A La-modified Al2O3 catalyst was prepared with deposition-precipitation method. The effect of calcination temperature on the reactivity for vapor phase hydrofluorination of acetylene to vinyl fluoride. The catalysts calcined at different temperatures were characterized using NH3-TPD, pyridine-FTIR, X-ray diffraction, and Raman techniques. It was found that the calcination process could not only change the structure of these catalysts but also modify the amount of surface acidity on the catalysts. The catalyst calcined at 400 ℃ exhibited the highest conversion of acetylene （94.6%） and highest selectivity to vinyl fluoride （83.4%） and lower coke deposition selectivity （0.72%）. The highest activity was related to the largest amount of surface acidity on the catalyst, and the coke deposition was also related to the total amount of surface acidic sites.
基金supported by the National Basic Research Program of China (No. 2009CB219901)
文摘In the process of dimerization of acetylene to produce monovinylacetylene （MVA）,the loss of active component CuCl in the Nieuwland catalyst due to the formation of a dark red precipitate was investigated.The formula of the precipitate was CuCl·2C2H2·1/5NH 3,and it was presumed to be formed by the combination of NH 3,C2H2 and [Cu]-acetylene π-complex,which was an intermediate in the dimerization reaction.The addition of hydrochloric acid into the catalyst can reduce the formation of precipitate,whereas excessive H＋ is unfavorable to the dimerization reaction of acetylene.To balance between high acetylene conversion and low loss rate of CuCl,the optimum mass percentage of HCl in the added hydrochloric acid was determined.The result showed the optimum mass percentage of HCl decreased from 5.0% to 3.2% when the space velocity of acetylene was from 140 h-1 to 360 h-1.The result in this work also indicated the pH of the Nieuwland catalyst should be kept in the range of 5.80-5.97 during the reaction process,which was good for both catalyst life and acetylene conversion.
文摘A clay-like conductive material comprising polyaniline（PANI）-acetylene black particles is fabricated as a hole conductor for dye sensitized solar cell（DSSC）.The results show that the introduction of acetylene black into the polymer electrolyte improves the photovoltaic behavior of solid-state DSSC,owing to the increase of the hole mobility of PANI electrolyte,the improvement of the wetting quality of the composite electrolyte,and the reinforcement of interface contact between electrode and the electrolyte.Finally,the overall energy conversion efficiency of DSSC with PANI-50%（in weight）acetylene black electrolyte is 48% of that of liquid DSSC.Therefore,the PANI-acetylene black composition is a credible alternative to hole conductor in application of solid DSSC.
基金supported by the National Natural Science Foundation of China(21573232)~~
文摘The heterogeneity of active sites is the main obstacle for selectivity control in heterogeneous catalysis.Single atom catalysts（SACs） with homogeneous isolated active sites are highly desired in chemoselective transformations. In this work, a Pd1/ZnO catalyst with single‐atom dispersion of Pd active sites was achieved by decreasing the Pd loading and reducing the sample at a relatively low temperature. The Pd1/ZnO SAC exhibited excellent catalytic performance in the chemoselective hydrogenation of acetylene with comparable chemoselectivity to that of PdZn intermetallic catalysts and a greatly enhanced utilization of Pd metal. Such unusual behaviors of the Pd1/ZnO SAC in acetylene semi‐hydrogenation were ascribed to the high‐valent single Pd active sites, which could promote electrostatic interactions with acetylene but restrain undesired ethylene hydrogenation via the spatial restrictions of σ‐chemical bonding toward ethylene.
基金the National Natural Science Foundation of China(NSFCgrant No.21606199,21476207)the Science and Technology Department of Zhejiang Province(LGG20B060004)are gratefully acknowledged.
文摘In the process of acetylene hydrochlorination,the rapid deactivation of supported gold(Au)catalysts by acetylene is still a huge challenge.Here,we provide an innovative strategy for constructing an acetylene–deficient reaction phase on the active site by coating an ionic liquid film on the Au(H2O)/C surface.The reactant ratio of C2H2 to HCl in this acetylene–deficient reaction phase is 1:132,in contrast to the 1:1 M ratio in the gas phase,thus boosting the catalytic stability of Au(H2O)/C catalysts.The kinetic and theoretical analysis showed that the reduction of cationic gold by C2H2 and the generation of carbon deposition can be inhibited in this constructed reaction phase during reaction.The current work not only broadens the scope of supported Au catalysts in acetylene hydrochlorination,but also verifies the perspective of the tunability of stoichiometric balance,which can be used in other catalytic applications.
基金This work was supported by the National Natural Science Foundation of China （No.21273232 and No.21327901） and the Key Research Program of the Chinese Academy of Science （No.KGZD-EW-T05）. Ling Jiang acknowledges Hundred Talents Program of Chinese Academy of Sciences and Collaborative Innovation Center of Chemistry for Energy and Materials.
文摘The effect of solvation on the conformation of acetylene has been studied by adding one water molecule at a time. Quantum chemical calculations of the n＋ （C2H2）（H2O）n （n=1-5） clusters indicate that the H2O molecules prefer to form the OH...Tr interaction rather than the CH...O interaction. This solvation motif is different from that of neutral （C2H2）（H2O）n （n=1-4） clusters, in which the H2O molecules prefer to form the CH...O and OH...C Hbonds. For the H＋（C2H2）（H2O）n cationic clusters, the first solvation shell consists of one ring structure with two OH...Tr H-bonds and three water molecules, which is completed at n=4. Simulated infrared spectra reveal that vibrational frequencies of OH... H-bonded O-H stretching afford a sensitive probe for exploring the solvation of acetylene by protonated water molecules. Infrared spectra of the H＋ （C2H2）（H2O）n （n=1-5） clusters could be readily measured by the infrared photodissociation technique and thus provide useful information for the understanding of solvation processes.
文摘Pd/C catalysts were prepared by deposited Pd nanoparticles （NPs） on different carbon supports including activated carbon （AC）, graphite oxide （GO）, and reduced graphite oxide （rGO） using sol-immobilization method. Through transmission electron microscopy, powder X-ray di raction, and X-ray photoelectron spectroscopy, the role of the carbon supports for the catalytic performances of Pd/C catalysts was examined in selective hydrogenation of acetylene. The results indicate that Pd/AC exhibited higher activity and selectivity than Pd/GO and Pd/rGO in the gas phase selective hydrogenation of acetylene. Thermal and chemical treatment of AC supports also have some effect on the catalytic performance of Pd/AC catalysts. The differences in the activity and selectivity of various Pd/C catalysts were partly attributed to the metal-support interaction.
基金supported by the Natural Science Foundation of China(No.11079005 and 21033009)the Ministry of Science and Technology of China(2011CBA00503 and 2012CB720302)
文摘Commercial production of vinyl chloride from acetylene relies on the use of HgCla as the catalyst, which has caused severe environmental problem and threats to human health because of its toxicity. Therefore, it is vital to explore alternative catalysts without mercury. We report here that N-doped carbon can catalyze directly transformation of acetylene to vinyl chloride. Particularly, N-doped high surface area mesoporous carbon exhibits a rather high activity with the acetylene conversion reaching 77% and vinyl chloride selectivity above 98% at a space velocity of 1.0 mL.min-l.g-1 and 200 ~C. It delivers a stable performa℃nce within a test period of 100h and no obvious deactivation is observed, demonstrating potentials to substitute the notoriously toxic mercuric chloride catalyst.
文摘The IB metal(Au,Ag and Cu)alloyed Pd single atom catalysts had been proved to be efficient in promoting the selectivity for hydrogenation of acetylene to ethylene.As a base metal in the same group as Pd,the Ni-based catalysts are also active for hydrogenation reactions.Herein,the effects of the IB metals on the Ni/SiO2 catalyst for the selective hydrogenation of acetylene were systematically studied.Different from the Pd/SiO2 catalyst,the monometallic Ni/SiO2 catalyst is not active at low temperatures.The addition of the IB metals to the Ni/SiO2 catalysts can greatly enhance the activity.Besides,the catalytic activity of the AuNix/SiO2 and CuNix/SiO2 catalysts increase with the reduction temperature,while the AgNix/SiO2 catalysts are not sensitive to the pretreatment temperature.The origin of the effect of the different IB metals on the Ni-based catalysts for selective hydrogenation of acetylene is discussed based on the characterizations by XRD,TPR and microcalorimetric measurements.
基金supported by the National Natural Science Foundation of China (21576193)
文摘Ni/Si O_2 and bimetallic Ni_xGa/SiO_2 catalysts with different Ni/Ga atomic ratios(x = 10～2) were investigated for the selective hydrogenation of acetylene.It was found that Ni_xGa/SiO_2 showed higher selectivity to ethylene than Ni/Si O_2.This is attributed to the formation Ni-Ga alloy and Ni3 Ga intermetallic compound(IMC) where there was a charge transfer from Ga to Ni,which is favorable for reducing the adsorption strength and amount of ethylene on Ni atoms.As a result,the over-hydrogenation,the C–C bond hydrogenolysis and the polymerization were suppressed,and subsequently the selectivity to ethylene was enhanced.With the decrease of Ni/Ga atomic ratio,the activity and stability of the Ni_xGa/SiO_2 catalysts increased first and then decreased,while the ethylene selectivity tended to increase.Ni_5 Ga/SiO_2 exhibited the best performance.Under the conditions of 180 °C,0.1 MPa,and a reactant(1.0 vol% acetylene,5.0 vol% H_2 and 94 vol% N_2) with the space velocity of 36,000 m L h^(-1) g^(-1),the acetylene conversion maintained at 100% on Ni_5 Ga/SiO_2 during 120 h time on stream and the selectivity to ethylene was 75%～81%after reaction for 68 h.It was also found that the formation of Ni-Ga alloy and Ni_3 Ga IMC suppressed the incorporation of carbon to form NiCx,subsequently enhancing the catalyst stability.Additionally,with increasing the Ga content,the catalyst acid amount and strength tended to increase,which promoted the polymerization and carbon deposition and so the catalyst deactivation.
文摘Herein,we report an excellent,supported Ru(III)‐ChCl/AC catalyst with lower Ru content,where the ionic complex ChRuCl4 serves as the active component for acetylene hydrochlorination.The prepared heterogeneous Ru‐10%ChCl/AC catalyst shows excellent activity and long‐term stability.In this system,ChCl provides an environment for the ChRuCl4 to be stabilized as Ru(III),thus suppressing the reduction of the active species and the aggregation of ruthenium species during the reaction.The interaction between reactants and catalyst species was investigated by catalyst characterizations in combination with DFT calculations to disclose the effect of the ChRuCl4 complex and ChCl on the catalytic performance.This inexpensive,efficient,and long‐term catalyst is a competitive candidate for application in the hydrochlorination industry.
