Efficient catalysis of functinnatized β-cyctodextrins bearing aninoatkytimino groups for atdot condensations of nitrobenzatdehydes and acetone has been effected and substantiated by preparative experiments
An electrochemically reduced graphene oxide sample, ERGO_0.8v, was prepared by electrochemical reduction of graphene oxide （GO） at -0.8 V, which shows unique electrocatalytic activity toward tetracycline （TTC） det...An electrochemically reduced graphene oxide sample, ERGO_0.8v, was prepared by electrochemical reduction of graphene oxide （GO） at -0.8 V, which shows unique electrocatalytic activity toward tetracycline （TTC） detection compared to the ERGO-12v （GO applied to a negative potential of-1.2 V）, GO, chemically reduced GO （CRGO）-modified glassy carbon electrode （GC） and bare GC electrodes. The redox peaks of TTC on an ERGO-0.8v-modifled glass carbon electrode （GC/ERGO-0.8v） were within 0-0.5 V in a pH 3.0 buffer solution with the oxidation peak current correlating well with TTC concentration over a wide range from 0.1 to 160 mg/L Physical characterizations with Fourier transform infrared （FT-IR）, Raman, and X-ray photoelectron spectroscopies （XPS） demonstrated that the oxygen-containing functional groups on GO diminished after the electrochemical reduction at -0.8 V, yet still existed in large amounts, and the defect density changed as new sp2 domains were formed. These changes demonstrated that this adjustment in the number of oxygen-containing groups might be the main factor affecting the electrocatalytic behavior of ERGO. Additionally, the defect density and sp2 domains also exert a profound influence on this behavior. A possible mechanism for the TTC redox reaction at the GC/ERGO-0.8v electrode is also presented. This work suggests that the electrochemical reduction is an effective method to establish new catalytic activities of GO by setting appropriate parameters.展开更多
Silver coatings on the exterior surface of monolithic activated carbon（MAC） with different morphology were prepared by directly immersing MAC into [Ag（NH3）2]NO3 solution. Acid and base treatments were employed to ...Silver coatings on the exterior surface of monolithic activated carbon（MAC） with different morphology were prepared by directly immersing MAC into [Ag（NH3）2]NO3 solution. Acid and base treatments were employed to modify the surface oxygenic groups of MAC, respectively. The MACs＇ Brunauer-EmmettTeller（BET） surface area, surface groups, and silver coating morphology were characterized by N2 adsorption, elemental analysis（EA）, X-ray photoelectron spectroscopy（XPS）, and scanning electron microscopy（SEM）, respectively. The coating morphology was found to be closely related to the surface area and surface functional groups of MAC. For a raw MAC which contained a variety of oxygenic groups, HNO3 treatment enhanced the relative amount of highly oxidized groups such as carboxyl and carbonates, which disfavored the deposition of silver particles. By contrast, Na OH treatment significantly improved the amount of carbonyl groups, which in turn improved the deposition amount of silver. Importantly, lamella silver was produced on raw MAC while Na OH treatment resulted in granular particles because of the capping effect of carbonyl groups. At appropriate [Ag（NH3）2]NO3 concentrations, silver nanoparticles smaller than 100 nm were homogeneously dispersed on Na OH-treated MAC. The successful tuning of the size and morphology of silver coatings on MAC is promising for novel applications in air purification and for antibacterial or aesthetic purposes.展开更多
Activated carbon（AC） is very effective for multi-pollutant removal; however, the complicated components in flue gas can influence each other＇s adsorption. A series of adsorption experiments for multicomponents, inc...Activated carbon（AC） is very effective for multi-pollutant removal; however, the complicated components in flue gas can influence each other＇s adsorption. A series of adsorption experiments for multicomponents, including SO_2, NO, chlorobenzene and H2 O,on AC were performed in a fixed-bed reactor. For single-component adsorption, the adsorption amount for chlorobenzene was larger than for SO_2 and NO on the AC. In the multi-component atmosphere, the adsorption amount decreased by 27.6% for chlorobenzene and decreased by 95.6% for NO, whereas it increased by a factor of two for SO_2,demonstrating that a complex atmosphere is unfavorable for chlorobenzene adsorption and inhibits NO adsorption. In contrast, it is very beneficial for SO_2 adsorption. The temperature-programmed desorption（TPD） results indicated that the binding strength between the gas adsorbates and the AC follows the order of SO_2〉 chlorobenzene 〉 NO. The adsorption amount is independent of the binding strength. The presence of H2 O enhanced the component effects, while it weakened the binding force between the gas adsorbates and the AC. AC oxygen functional groups were analyzed using TPD and X-ray photoelectron spectroscopy（XPS） measurements. The results reveal the reason why the chlorobenzene adsorption is less affected by the presence of other components. Lactone groups partly transform into carbonyl and quinone groups after chlorobenzene desorption. The chlorobenzene adsorption increases the number of C = O groups, which explains the positive effect of chlorobenzene on SO_2 adsorption and the strong NO adsorption.展开更多
文摘Efficient catalysis of functinnatized β-cyctodextrins bearing aninoatkytimino groups for atdot condensations of nitrobenzatdehydes and acetone has been effected and substantiated by preparative experiments
基金supported by the National Natural Science Foundation of China(21007033)the Fundamental Research Funds of Shandong University(2015JC017)~~
文摘An electrochemically reduced graphene oxide sample, ERGO_0.8v, was prepared by electrochemical reduction of graphene oxide （GO） at -0.8 V, which shows unique electrocatalytic activity toward tetracycline （TTC） detection compared to the ERGO-12v （GO applied to a negative potential of-1.2 V）, GO, chemically reduced GO （CRGO）-modified glassy carbon electrode （GC） and bare GC electrodes. The redox peaks of TTC on an ERGO-0.8v-modifled glass carbon electrode （GC/ERGO-0.8v） were within 0-0.5 V in a pH 3.0 buffer solution with the oxidation peak current correlating well with TTC concentration over a wide range from 0.1 to 160 mg/L Physical characterizations with Fourier transform infrared （FT-IR）, Raman, and X-ray photoelectron spectroscopies （XPS） demonstrated that the oxygen-containing functional groups on GO diminished after the electrochemical reduction at -0.8 V, yet still existed in large amounts, and the defect density changed as new sp2 domains were formed. These changes demonstrated that this adjustment in the number of oxygen-containing groups might be the main factor affecting the electrocatalytic behavior of ERGO. Additionally, the defect density and sp2 domains also exert a profound influence on this behavior. A possible mechanism for the TTC redox reaction at the GC/ERGO-0.8v electrode is also presented. This work suggests that the electrochemical reduction is an effective method to establish new catalytic activities of GO by setting appropriate parameters.
基金Funded by the Interdisciplinary Program of Shanghai Jiao Tong University(YG2016MS24)
文摘Silver coatings on the exterior surface of monolithic activated carbon（MAC） with different morphology were prepared by directly immersing MAC into [Ag（NH3）2]NO3 solution. Acid and base treatments were employed to modify the surface oxygenic groups of MAC, respectively. The MACs＇ Brunauer-EmmettTeller（BET） surface area, surface groups, and silver coating morphology were characterized by N2 adsorption, elemental analysis（EA）, X-ray photoelectron spectroscopy（XPS）, and scanning electron microscopy（SEM）, respectively. The coating morphology was found to be closely related to the surface area and surface functional groups of MAC. For a raw MAC which contained a variety of oxygenic groups, HNO3 treatment enhanced the relative amount of highly oxidized groups such as carboxyl and carbonates, which disfavored the deposition of silver particles. By contrast, Na OH treatment significantly improved the amount of carbonyl groups, which in turn improved the deposition amount of silver. Importantly, lamella silver was produced on raw MAC while Na OH treatment resulted in granular particles because of the capping effect of carbonyl groups. At appropriate [Ag（NH3）2]NO3 concentrations, silver nanoparticles smaller than 100 nm were homogeneously dispersed on Na OH-treated MAC. The successful tuning of the size and morphology of silver coatings on MAC is promising for novel applications in air purification and for antibacterial or aesthetic purposes.
基金supported by the National Natural Science Foundation of China (Nos. 21177129, 21207132) the Strategic Priority Research Program of the Chinese Academy of Sciences (No. XDB05050502)
文摘Activated carbon（AC） is very effective for multi-pollutant removal; however, the complicated components in flue gas can influence each other＇s adsorption. A series of adsorption experiments for multicomponents, including SO_2, NO, chlorobenzene and H2 O,on AC were performed in a fixed-bed reactor. For single-component adsorption, the adsorption amount for chlorobenzene was larger than for SO_2 and NO on the AC. In the multi-component atmosphere, the adsorption amount decreased by 27.6% for chlorobenzene and decreased by 95.6% for NO, whereas it increased by a factor of two for SO_2,demonstrating that a complex atmosphere is unfavorable for chlorobenzene adsorption and inhibits NO adsorption. In contrast, it is very beneficial for SO_2 adsorption. The temperature-programmed desorption（TPD） results indicated that the binding strength between the gas adsorbates and the AC follows the order of SO_2〉 chlorobenzene 〉 NO. The adsorption amount is independent of the binding strength. The presence of H2 O enhanced the component effects, while it weakened the binding force between the gas adsorbates and the AC. AC oxygen functional groups were analyzed using TPD and X-ray photoelectron spectroscopy（XPS） measurements. The results reveal the reason why the chlorobenzene adsorption is less affected by the presence of other components. Lactone groups partly transform into carbonyl and quinone groups after chlorobenzene desorption. The chlorobenzene adsorption increases the number of C = O groups, which explains the positive effect of chlorobenzene on SO_2 adsorption and the strong NO adsorption.
