In this editorial,we offer our perspective on the groundbreaking study entitled“Hypoxia and inflammatory factor preconditioning enhances the immunosup-pressive properties of human umbilical cord mesenchymal stem cell...In this editorial,we offer our perspective on the groundbreaking study entitled“Hypoxia and inflammatory factor preconditioning enhances the immunosup-pressive properties of human umbilical cord mesenchymal stem cells”,recently published in World Journal of Stem Cells.Despite over three decades of research on the clinical application of mesenchymal stem cells(MSCs),only a few therapeutic products have made it to clinical use,due to multiple preclinical and clinical challenges yet to be addressed.The study proved the hypoxia and inflammatory factor preconditioning led to higher immunosuppressive effects of MSCs without damaging their biological characteristics,which revealed the combination of inflammatory factors and hypoxic preconditioning offers a promising approach to enhance the function of MSCs.As we delve deeper into the intricacies of pretreat-ment methodologies,we anticipate a transformative shift in the landscape of MSC-based therapies,ultimately contributing to improved patient outcomes and advancing the field as a whole.展开更多
Flotation separation of magnesite and its calcium-containing carbonate minerals is a difficult problem.Recently,new regulat-ors have been proposed for magnesite flotation decalcification,although traditional regulator...Flotation separation of magnesite and its calcium-containing carbonate minerals is a difficult problem.Recently,new regulat-ors have been proposed for magnesite flotation decalcification,although traditional regulators such as tannin,water glass,sodium carbon-ate,and sodium hexametaphosphate are more widely used in industry.However,they are rarely used as the main regulators in research because they perform poorly in magnesite and dolomite single-mineral flotation tests.Inspired by the limonite presedimentation method and the addition of a regulator to magnesite slurry mixing,we used a tannin pretreatment method for separating magnesite and dolomite.Microflotation experiments confirmed that the tannin pretreatment method selectively and largely reduces the flotation recovery rate of dolomite without affecting the flotation recovery rate of magnesite.Moreover,the contact angles of the tannin-pretreated magnesite and dolomite increased and decreased,respectively,in the presence of NaOl.Zeta potential and Fourier transform infrared analyses showed that the tannin pretreatment method efficiently hinders NaOl adsorption on the dolomite surface but does not affect NaOl adsorption on the magnesite surface.X-ray photoelectron spectroscopy and density functional theory calculations confirmed that tannin interacts more strongly with dolomite than with magnesite.展开更多
AIM:To investigate the antioxidant protective effect of Lycium barbarum glycopeptide(LbGP)pretreatment on retinal ischemia-reperfusion(I/R)injury(RIRI)in rats.METHODS:RIRI was induced in Sprague Dawley rats through an...AIM:To investigate the antioxidant protective effect of Lycium barbarum glycopeptide(LbGP)pretreatment on retinal ischemia-reperfusion(I/R)injury(RIRI)in rats.METHODS:RIRI was induced in Sprague Dawley rats through anterior chamber perfusion,and pretreatment involved administering LbGP via gavage for 7d.After 24h of reperfusion,serum alanine aminotransferase(ALT),aspartate aminotransferase(AST),and creatinine(CREA)levels,retinal structure,expression of Caspase-3 and Caspase-8,superoxide dismutase(SOD)activity,and malondialdehyde(MDA)in the retina were measured.RESULTS:The pretreatment with LbGP effectively protected the retina and retinal tissue from edema and inflammation in the ganglion cell layer(GCL)and nerve fiber layer(NFL)of rats subjected to RIRI,as shown by light microscopy and optical coherence tomography(OCT).Serum AST was higher in the model group than in the blank group(P=0.042),but no difference was found in ALT,AST,and CREA across the LbGP groups and model group.Caspase-3 expression was higher in the model group than in the blank group(P=0.006),but no difference was found among LbGP groups and the model group.Caspase-8 expression was higher in the model group than in the blank group(P=0.000),and lower in the 400 mg/kg LbGP group than in the model group(P=0.016).SOD activity was lower in the model group than in the blank group(P=0.001),and the decrease was slower in the 400 mg/kg LbGP group than in the model group(P=0.003).MDA content was higher in the model group than in the blank group(P=0.001),and lower in the 400 mg/kg LbGP group than in the model group(P=0.016).The pretreatment with LbGP did not result in any observed liver or renal toxicity in the model.CONCLUSION:LbGP pretreatment exhibits dosedependent anti-inflammatory,and antioxidative effects by reducing Caspase-8 expression,preventing declines of SOD activity,and decreasing MDA content in the RIRI rat model.展开更多
Millets are widely recognized for their nutritional significance;however, the methods employed for their processing are currently lacking. This article primarily focuses on the advanced technologies and progressions i...Millets are widely recognized for their nutritional significance;however, the methods employed for their processing are currently lacking. This article primarily focuses on the advanced technologies and progressions in millet dehulling and polishing. These technologies operate based on the fundamental principles of compression-shearing, abrasion-friction, and centrifugal-impact forces. Processing of millets can be challenging because of the physical characteristics and tight attachment of hull and bran to the endosperm. However, several dehullers have been designed to solve this problem for different kinds of millets. In addition, the nutritional and anti-nutritional characteristics undergo alterations due to both dehulling and polishing processes. These alterations are thoroughly examined and discussed in this article. Specifically, anti-nutrients such as tannins and phytate are predominantly found in the outer pericarp of the grain and experience a reduction after undergoing dehulling and polishing. The nutritional properties are also subjected to a reduction;however, this reduction can be mitigated by subjecting the grains to certain pretreatments before dehulling and polishing. These treatments serve to enhance dehulling efficiency and nutrient digestibility while simultaneously reducing the presence of anti-nutrients. Novel thermal and non-thermal methodologies such as microwave, hydrothermal, high-pressure processing, and ohmic heating can be employed for processing millets, thereby diminishing the loss of nutrients. Additional research can be carried out to investigate their impact on the dehulling and polishing of millets.展开更多
Development of pore structures of activated carbon(AC)from activation of biomass with ZnCl_(2) relies on content and structure of cellulose/hemicellulose in the feedstock.Thermal pretreatment of biomass could induce d...Development of pore structures of activated carbon(AC)from activation of biomass with ZnCl_(2) relies on content and structure of cellulose/hemicellulose in the feedstock.Thermal pretreatment of biomass could induce dehydration and/or aromatization to change the structure of cellulose/hemicellulose.This might interfere with evolution of structures of AC,which was investigated herein via thermal pretreatment of willow branch(WB)from 200 to 360℃and the subsequent activation with ZnCl_(2) at 550℃.The results showed that thermal pretreatment at 360℃(WB-360)could lead to substantial pyrolysis to form biochar,with a yield of 31.9%,accompanying with nearly complete destruction of cellulose crystals and remarkably enhanced aromatic degree.However,cellulose residual in WB-360 could still be activated to form AC-360 with specific surface area of 1837.9 m~2·g^(-1),which was lower than that in AC from activation of untreated WB(AC-blank,2077.8 m~2·g^(-1)).Nonetheless,the AC-200 from activation of WB-200 had more developed pores(2113.9 m~2·g^(-1))and superior capability for adsorption of phenol,due to increased permeability of ZnCl_(2) to the largely intact cellulose structure in WB-200.The thermal pretreatment did increase diameters of micropores of AC but reduced the overall yield of AC(26.8%for AC-blank versus 18.0%for AC-360),resulting from accelerated cracking but reduced intensity of condensation.In-situ infrared characterization of the activation showed that ZnCl_(2) mainly catalyzed dehydration,dehydrogenation,condensation,and aromatization but not cracking,suppressing the formation of derivatives of cellulose and lignin in bio-oil.The thermal pretreatment formed phenolic-OH and C=O with higher chemical innerness,which changed the reaction network in activation,shifting morphology of fibrous structures in AC-blank to“melting surface”in AC-200 or AC-280.展开更多
The QuEChERS extraction technique is a pretreatment technique that has been rapidly applied in recent years and is widely used in the field of pesticide residues with many advantages. This technique is based on solid ...The QuEChERS extraction technique is a pretreatment technique that has been rapidly applied in recent years and is widely used in the field of pesticide residues with many advantages. This technique is based on solid phase extraction (SPE), which uses the interaction between adsorbent and impurities in the matrix to achieve the purpose of purification. The method has easier operation and better purification effect than SPE. In this paper, the research progress of the QuEChERS technique in pesticide residue detection in different fields in recent years and its future development were reviewed, hoping to provide reference for further development and utilization of the QuEChERS technique in pesticide residue detection in the future.展开更多
This research was undertaken to study the effect of Zr-enhanced plasma electrolytic oxidation(PEO) as a pretreatment on the corrosion performance of epoxy coating applied on Magnesium in 3.5 wt.% Na Cl solution. The p...This research was undertaken to study the effect of Zr-enhanced plasma electrolytic oxidation(PEO) as a pretreatment on the corrosion performance of epoxy coating applied on Magnesium in 3.5 wt.% Na Cl solution. The parameters of delamination index along with coating damage index were extracted through electrochemical impedance spectroscopy(EIS) tests to determine how Zr may affect the corrosion protection of duplex PEO/epoxy coated samples. Pull-off adhesion tests were also accomplished to form a better understanding of Zr-enhanced PEO coating’ function. According to the obtained results, the presence of Zr can reduce the damage to the coating system by almost twice.展开更多
Selective surface dissolution was found to be important in spodumene flotation. In this study, we proposed to introduce ultrasound into the pretreatment process to accelerate particle vibration and cavitation, as well...Selective surface dissolution was found to be important in spodumene flotation. In this study, we proposed to introduce ultrasound into the pretreatment process to accelerate particle vibration and cavitation, as well as the migration of mineral surface components to solution. Micro-flotation results showed that the flotation recovery of spodumene can be 86.08% by ultrasound pretreatment, but only 39.30% by traditional mechanical agitation pretreatment. Compared with traditional mechanical agitation, ultrasonic pretreatment can shorten the pretreatment process, reduce the dosage of agents, reduce the mechanical agitation speed, and improve the efficiency of the pretreating process. Inductively coupled plasma analysis showed that, in the ultrasonic system, the amount of Li, Al, and Si species in the solution was twice as much as those in the traditional preprocessing system. Moreover, the scanning electron microscope results demonstrated a larger surface dissolution area in the ultrasonic system. X-Ray photoelectron spectroscopy results showed that the atomic concentration of Si species on the spodumene surface decreased, whereas the relative atomic concentrations of Li and Al species increased, indicating that the ultrasound effect strengthened the selective dissolution of elements on the mineral surface.The high-resolution spectra of O 1s showed that more collectors are adsorbed on the mineral surface treated by ultrasonic pretreatment.展开更多
The quality and flavor of scallops changes during the fresh dry rehydration process.In order to control the changes after rehydration,a scallop pretreatment method was adopted.The pretreatment method involved impregna...The quality and flavor of scallops changes during the fresh dry rehydration process.In order to control the changes after rehydration,a scallop pretreatment method was adopted.The pretreatment method involved impregnating fresh scallops with 0.2 g/100 m L konjac glucomannan(KGM),carrageenan(CA),and sodium alginate(SA)before the drying and rehydration process.After rehydration,the KGM treated samples had better water retention and the highest betaine content.The CA treated samples had a deepened yellow color and the highest content of flavoring amino acids(FAA)and inosine monophosphate(IMP).What’s more,a total of 77 volatile compounds were detected,with a maximum of 15 esters.The highest proportion in the four groups was eugenol,followed by n-hexadecanoic acid,methyl hexadecanoate etc.The SA group had no significant contribution in terms of quality and taste.The samples pretreated with KGM had the best quality,and those pretreated by CA had the best flavor.展开更多
In this study,the effects of intermetallic compounds(Mg_(17)Al_(12)and Al_(8)Mn_(5))on the Mg-Al layered double hydroxide(LDH)formation mechanism and corrosion behavior of an in-situ LDH/Mg(OH)_(2)steam coatings on AZ...In this study,the effects of intermetallic compounds(Mg_(17)Al_(12)and Al_(8)Mn_(5))on the Mg-Al layered double hydroxide(LDH)formation mechanism and corrosion behavior of an in-situ LDH/Mg(OH)_(2)steam coatings on AZ80 Mg alloy were investigated.Citric acid(CA)was used to activate the alloy surface during the pretreatment process.The alloy was first pretreated with CA and then subjected to a hydrothermal process using ultrapure water to produce Mg-Al-LDH/Mg(OH)_(2)steam coating.The effect of different time of acid pretreatment on the activation of the intermetallic compounds was investigated.The microstructure and elemental composition of the obtained coatings were analyzed using FE-SEM,EDS,XRD and FT-IR.The corrosion resistance of the coated samples was evaluated using different techniques,i.e.,potentiodynamic polarization(PDP),electrochemical impedance spectrum(EIS)and hydrogen evolution test.The results indicated that the CA pretreatment significantly influenced the activity of the alloy surface by exposing the intermetallic compounds.The surface area fraction of Mg_(17)Al_(12)and Al_(8)Mn_(5)phases on the surface of the alloy was significantly higher after the CA pretreatment,and thus promoted the growth of the subsequent Mg-Al-LDH coatings.The CA pretreatment for 30 s resulted in a denser and thicker LDH coating.Increase in the CA pretreatment time significantly led to the improvement in corrosion resistance of the coated AZ80 alloy.The corrosion current density of the coated alloy was lower by three orders of magnitude as compared to the uncoated alloy.展开更多
A new method of pretreatment of corn straw with Phanerochaete chrysosporium combined with pyrolysis was proposed to improve the quality of bio-oil.The characterization results demonstrated that microbial pretreatment ...A new method of pretreatment of corn straw with Phanerochaete chrysosporium combined with pyrolysis was proposed to improve the quality of bio-oil.The characterization results demonstrated that microbial pretreatment was an effective method to decrease the lignin,which can achieve a maximum removal rate of 44.19%.Due to the destruction of biomass structure,the content of alkali metal and alkaline earth metal is reduced.Meanwhile,the depolymerized biomass structure created better pyrolysis conditions to promote the pyrolysis efficiency,increase the average decomposition rate of pyrolysis and reduce the residue.In fast pyrolysis,because of the enrichment of cellulose and the removal of lignin,the contents of acids,linear carbonyls,furans,and sugars increased while the contents of phenols decreased.As for the catalytic pyrolysis,due to the hydrocarbon pool reaction and shape selection deoxidation of ZSM-5 catalyst,the total hydrocarbon and aromatics contents can significantly increase up to 34.37%and 30.59%,respectively,with 3 weeks of pretreatment.And the the low molecular content of bio-oil increased after pretreatment,which can significantly benefit the entry of primary pyrolysis steam into the catalyst pores to improve the catalytic efficiency and hydrocarbon contents.This method provides a new treatment idea for high-quality utilization of biomass.展开更多
Hemicellulose and lignin are not reasonably utilized during the dissolved pulp preparation process.This work aimed to propose a process for the co-production of dissolving pulp,furfural,and lignin from eucalyptus.High...Hemicellulose and lignin are not reasonably utilized during the dissolved pulp preparation process.This work aimed to propose a process for the co-production of dissolving pulp,furfural,and lignin from eucalyptus.High-grade dissolving pulp was prepared from eucalyptus using a combination of extremely low acid(ELA)pretreatment,Kraft cooking,and elementary chlorine-free(ECF)bleaching.The obtained pre-hydrolysate was catalytic conversion into furfural in a biphasic system,and lignin during Kraft cooking and ECF was recovered.The process condition was discussed as well as the mass flow direction.The results showed that ELA pretreatment could effectively remove 80.1%hemicellulose.Compared with traditional hydrothermal pretreatment,the ELA pretreatment significantly increased the xylose yield from 5.05 to 14.18 g/L at 170℃ for 2 h,which had practical significance for furfural production.The 82.7%furfural yield and 82.9%furfural selectivity were obtained from xylose-rich pre-hydrolysate using NaCl as a phase modifier in a biphasic system with 4-methyl-2-pentanone(MIBK)as an organic phase by ion exchange resin catalysts at 190℃ for 2 h.Subsequently,the pretreated eucalyptus was subjected to Kraft cooking,and the optimal alkali amount was 14%.Then,the Kraft pulp was bleached using the O-D1-EP-D_(2) sequence,and dissolving pulp was obtained with an ISO brightness of 86.0%,viscosity of 463 mL/g,andα-cellulose content of 95.4%.The Kraft lignin which has a potential application was investigated by 2D-HSQC NMR and 31P NMR.The results showed that the S/G ratio of Kraft lignin was 1.93,and the content of phenolic hydroxyl groups was 2.53 mmol/g.Moreover,based on the above proposed process,30.5 g dissolving pulp,5.5 g furfural,and 21.2 g lignin per 100 g eucalyptus chips(oven dry)were produced.This research will provide new catalysis and pulping technical routes for dissolving pulp,furfural,and Kraft lignin products,which are in great demand in the chemical industry.展开更多
The effects of sulfuric acid-associated mechanical pretreatment on the hydrolysis behavior of pine sawdust were investigated in this study.Sulfuric acid could act as an acidic catalyst to depolymerize holocellulose th...The effects of sulfuric acid-associated mechanical pretreatment on the hydrolysis behavior of pine sawdust were investigated in this study.Sulfuric acid could act as an acidic catalyst to depolymerize holocellulose through cleavage of the glycosidic bonds,the dissociation energies of which were supplied by the impact of a ball on pine sawdust,during milling.The destruction of glycosidic and hydrogen bonds in pine sawdust resulted in a decrease of crystallinity and an increase of water solubility.The sulfuric acid could promote the hydrolysis of holocellulose and its hydrolysis products.It also destroyed the chemical linkages between holocellulose and lignin during ball milling.The cleavage of chemical linkages with holocellulose made lignin more difficult to hydrolyze in subcritical water,and higher activation energy was needed to hydrolyze pretreated pine sawdust at higher reaction temperatures.It also led to the formation of glucose char and aromatic-linked polymer char from the hydrolysis products of holocellulose.展开更多
Corn stalk hydrothermal wastewater(CSHW)was used as a pretreatment for whole-slurry anaerobic co-digestion instead of conventional acid pretreatment.CSHW pretreatment was conducted at 20℃,35℃and 50℃for 3,6 and 9 h,...Corn stalk hydrothermal wastewater(CSHW)was used as a pretreatment for whole-slurry anaerobic co-digestion instead of conventional acid pretreatment.CSHW pretreatment was conducted at 20℃,35℃and 50℃for 3,6 and 9 h,after which all experimental groups were digested at 35℃for 24 days.This pretreatment method efficiently broke the lignocellulose structure of the corn stalk.Different from the volatile fatty acids(VFAs)content,the pH and RS contents were relatively higher than those of the control during the pretreatment process.Furthermore,the highest methane production[185.03 mL•g-1 VS(volatile solid)]was achieved at 55.46%under 35℃in 6 h,which was higher than that of the normal corn stalk anaerobic digestion.The VFAs contents and pH increased compared to CK upon the addition of NaOH to adjust pH,and the RS content also increased slightly due to the degradability of lignocellulose during the whole-slurry anaerobic co-digestion.This work provided a potential method to sustainably treat wastewater and improve fermentation performance.展开更多
Background: In developed countries, colon cancer is the second most prevalent cancer, only exceeded by prostate cancer in men and breast cancer in women. After Hepatocellular carcinoma, breast cancer, bladder cancer, ...Background: In developed countries, colon cancer is the second most prevalent cancer, only exceeded by prostate cancer in men and breast cancer in women. After Hepatocellular carcinoma, breast cancer, bladder cancer, lung cancer, Non-Hodgkin Lymphoma and brain tumors, colon cancer is the 7<sup>th</sup> most common cancer in Egypt, in both sexes, representing 3.47% and 3%, in both male and female cancers, respectively. Aim of the Work: The aim of this study was to evaluate the prognostic and predictive significance of pretreatment Neutrophil/lymphocytes ratio (NLR), in terms of disease-free survival (DFS) and recurrence, in high-risk stage II and stage III Colorectal cancer patients who underwent curative resection. Patients and Methods: We retrospectively evaluated 103 patients, who were submitted to upfront surgery as first therapeutic option in curative intent, between January 2017 and December 2018. Pretreatment Neutrophil/lymphocytes ratio (NLR), as well as demographics, clinical, histopathologic, and laboratory data were analyzed. Univariate and multivariate analyses were conducted to identify prognostic factors associated with disease free survival (DFS) and recurrence. Results: The cutoff point of Neutrophils/lymphocytes ratio (NLR) was calculated with Kaplan-Meier curves and log-rank test to 3. This study revealed that neutrophils/lymphocytes ratio (NLR) was significantly associated with disease free survival (p as no difference in efficacy between both chemotherapy regimens FOLFOX and XELOX in both high-risk stage II and stage III colon cancer regarding disease free survival & the toxicity profile associated with each regimen and its grades between patients. Conclusion: Our study suggests that preoperative Neutrophils/lymphocytes ratio (NLR) more than 3 may be an independent prognostic marker for TTR (time to recurrence) in high-risk stage II and stage III colon cancer patients.展开更多
Two carbonation approaches are considered for studying the effects on the hardening mechanisms of slurries made of 100 wt%electric arc furnace steel slag (EAF) slag or 80 wt%EAF slag incorporating 20 wt% of Portland c...Two carbonation approaches are considered for studying the effects on the hardening mechanisms of slurries made of 100 wt%electric arc furnace steel slag (EAF) slag or 80 wt%EAF slag incorporating 20 wt% of Portland cement,which are applied during the hot-stage pretreatment with simulated gas for raw steel slag or the accelerated carbonation curing of slurry.The mechanical strengths,carbonate products,microstructures and CO_(2) uptakes were quantitatively investigated.Results manifest that accelerated carbonation curing increases the compressive strengths of steel slag slurry,from 17.1 MPa (binder of 80 wt% EAF and 20 wt%cement under standard moisture curing) to 36.0 MPa (binder of 80 wt%EAF and 20 wt%cement under accelerated carbonation curing),with a CO_(2) uptake of 52%.In contrast,hot-stage carbonation applied during the pretreatment of steel slag increases the compressive strengths to 43.7 MPa (binder of 80 wt%carbonated EAF and 20 wt%cement under accelerated carbonation curing),with a CO_(2) uptake of 67%.Hotstage carbonation of steel slag is found for particle agglomeration,minerals remodeling and calcite formed,thus causing an activated steel slag with a dense structure and more active components.Accelerated carbonation curing of steel slag slurry paste results in the newly formed amorphous CaCO_(3),calcite crystalline and silica gels that covered the pores of the matrix,facilitating microstructure densification and strength improvement.Adopting the combinative methods of the hot-stage CO_(2) pretreatment and accelerated carbonation curing creates a promising high-volume steel slag-based binder with high strengths and CO_(2) storage.展开更多
In the open ocean,radium isotopes are useful tracers of residence time and water-mass mixing.However,limited by the measurement resolution of commonly used gamma counters,the low activity of radium in the open ocean m...In the open ocean,radium isotopes are useful tracers of residence time and water-mass mixing.However,limited by the measurement resolution of commonly used gamma counters,the low activity of radium in the open ocean makes it necessary to enrich radium from large volumes of seawater and pretreat radium-enriched carriers prior to measurements.The commonly applied method of radium enrichment and pretreatment,however,has limitations of uneven coating of MnO_(2)on cartridges,relatively expensive cartridges,time-consuming issues during cartridge-ashing,ash loss during transfer,and changes of gamma counters efficiency caused by different ash weights.To address these issues,in this study we optimized the enrichment and pretreatment of low-activity radium prior to measurements.Firstly,we replaced commonly used acrylic cartridges with cheaper polypropylene cartridges,which took 6 h to be ashed,42 h shorter than for acrylic cartridges.Secondly,MnO_(2)-coated cartridges were prepared with a circulating hot acidic KMnO_(4)solution to ensure homogeneous coating.The radium extraction efficiency of this MnO_(2)-coated cartridge was 20%-61%higher than that prepared by directly immersing cartridges in the solution.The radium delayed coincidence counter efficiency for MnO_(2)-coated cartridge was stable with a moisture content of 0.05-1.Lastly,after ashing cartridges,instead of directly transferring the ash to a measurement vial,a mixture of hydroxylamine hydrochloride and hydrochloric acid was used to completely leach the ash for long-lived radium,followed by coprecipitation by BaSO_(4),to avoid potential loss of ash during transfer and variations in measurement geometry due to different ash weights.And the recovery of long-lived radium pretreatment was 94%-102%,which improved by 11%compared with the common method.In addition,the radium extraction efficiency of the MnO_(2)-coated cartridge varied from 3%to 4%within the in situ pump working flow rate of 4-7 L/min,which fell within the measurement errors.展开更多
[ Objective] The aim was to study pretreatment of ultrasound enhancing dilute H2SO4 on cellulase activity of corn straw liquid fermentation and explore the pretretment＇ s optimal conditions. [ Method ] By using ortho...[ Objective] The aim was to study pretreatment of ultrasound enhancing dilute H2SO4 on cellulase activity of corn straw liquid fermentation and explore the pretretment＇ s optimal conditions. [ Method ] By using orthogonal test, the pretretment of ultrasound enhancing dilute H2SO4 on corn straw was studied, then straw was fermented as the sole carbon source. Finally, the cellulase activity in extracellular fermentation broth was determined. [Result] The results showed that cellulase activity in extracellular broth was greatest under the conditions of acid bath time 3 h, acid concentration 3.5%, ultrasonic power 150 W, and ultrasonic time 5 h. They were FPA 15.82 U/ml, Cx 39.9 U/ml, 13-Giu 55.94 U/ml respectively. [ Conclusion] Under the above conditions, extracellular cellulase production has a high stability.展开更多
It is difficult to directly electroplate Al on Mg alloys. The effects of pretreatment parameters on the corrosion resistance of films obtained on AZ31 Mg alloy surface were studied by using potentiodynamic polarizatio...It is difficult to directly electroplate Al on Mg alloys. The effects of pretreatment parameters on the corrosion resistance of films obtained on AZ31 Mg alloy surface were studied by using potentiodynamic polarization curves, to produce a compact interfacial layer as zinc-immersion deposition. After the substrate was pretreated under optimized conditions, aluminum was electrodeposited on AZ31 from TMPAC-AlCl3 room temperature ionic liquids. The depositions were characterized by scanning electron microscope equipped with energy dispersion X-ray. The results show that the traditional pretreatment of Mg alloys was successfully used for the Al-electroplating process from TMPAC-AlCl3 ionic liquids. The entire procedure includes alkaline cleaning, chemical pickling, surface activation （400 mL/L HF acid, 10 min）, zinc-immersion （20 min） and anhydrous treatment. A relatively compact zinc-immersion film was prepared on the substrate surface. A silvery-colored satin aluminum deposition was obtained on AZ31 from TMPAC-AlCl3 using direct current plating.展开更多
基金National Natural Science Foundation of China,No.82172196,No.82372507,and No.81971891.
文摘In this editorial,we offer our perspective on the groundbreaking study entitled“Hypoxia and inflammatory factor preconditioning enhances the immunosup-pressive properties of human umbilical cord mesenchymal stem cells”,recently published in World Journal of Stem Cells.Despite over three decades of research on the clinical application of mesenchymal stem cells(MSCs),only a few therapeutic products have made it to clinical use,due to multiple preclinical and clinical challenges yet to be addressed.The study proved the hypoxia and inflammatory factor preconditioning led to higher immunosuppressive effects of MSCs without damaging their biological characteristics,which revealed the combination of inflammatory factors and hypoxic preconditioning offers a promising approach to enhance the function of MSCs.As we delve deeper into the intricacies of pretreat-ment methodologies,we anticipate a transformative shift in the landscape of MSC-based therapies,ultimately contributing to improved patient outcomes and advancing the field as a whole.
基金supported by the National Natural Science Foundation of China (Nos.51974064,52174239,and 52374259)the Open Project of the Key Laboratory of Solid Waste Treatment and Resource Utiliza-tion of the Ministry of Education,China (No.23kfgk02).
文摘Flotation separation of magnesite and its calcium-containing carbonate minerals is a difficult problem.Recently,new regulat-ors have been proposed for magnesite flotation decalcification,although traditional regulators such as tannin,water glass,sodium carbon-ate,and sodium hexametaphosphate are more widely used in industry.However,they are rarely used as the main regulators in research because they perform poorly in magnesite and dolomite single-mineral flotation tests.Inspired by the limonite presedimentation method and the addition of a regulator to magnesite slurry mixing,we used a tannin pretreatment method for separating magnesite and dolomite.Microflotation experiments confirmed that the tannin pretreatment method selectively and largely reduces the flotation recovery rate of dolomite without affecting the flotation recovery rate of magnesite.Moreover,the contact angles of the tannin-pretreated magnesite and dolomite increased and decreased,respectively,in the presence of NaOl.Zeta potential and Fourier transform infrared analyses showed that the tannin pretreatment method efficiently hinders NaOl adsorption on the dolomite surface but does not affect NaOl adsorption on the magnesite surface.X-ray photoelectron spectroscopy and density functional theory calculations confirmed that tannin interacts more strongly with dolomite than with magnesite.
基金Supported by the National Natural Science Foundation of China(No.82174444)the Chengdu University of Traditional Chinese Medicine Xinglin Scholar Discipline Talent Research Promotion Program Project(No.XKTD2022009)the Inheritance and Communication Department of Science and Technology Innovation Engineering Department of Chinese Academy of Chinese Medical Sciences(No.XJ2023001701).
文摘AIM:To investigate the antioxidant protective effect of Lycium barbarum glycopeptide(LbGP)pretreatment on retinal ischemia-reperfusion(I/R)injury(RIRI)in rats.METHODS:RIRI was induced in Sprague Dawley rats through anterior chamber perfusion,and pretreatment involved administering LbGP via gavage for 7d.After 24h of reperfusion,serum alanine aminotransferase(ALT),aspartate aminotransferase(AST),and creatinine(CREA)levels,retinal structure,expression of Caspase-3 and Caspase-8,superoxide dismutase(SOD)activity,and malondialdehyde(MDA)in the retina were measured.RESULTS:The pretreatment with LbGP effectively protected the retina and retinal tissue from edema and inflammation in the ganglion cell layer(GCL)and nerve fiber layer(NFL)of rats subjected to RIRI,as shown by light microscopy and optical coherence tomography(OCT).Serum AST was higher in the model group than in the blank group(P=0.042),but no difference was found in ALT,AST,and CREA across the LbGP groups and model group.Caspase-3 expression was higher in the model group than in the blank group(P=0.006),but no difference was found among LbGP groups and the model group.Caspase-8 expression was higher in the model group than in the blank group(P=0.000),and lower in the 400 mg/kg LbGP group than in the model group(P=0.016).SOD activity was lower in the model group than in the blank group(P=0.001),and the decrease was slower in the 400 mg/kg LbGP group than in the model group(P=0.003).MDA content was higher in the model group than in the blank group(P=0.001),and lower in the 400 mg/kg LbGP group than in the model group(P=0.016).The pretreatment with LbGP did not result in any observed liver or renal toxicity in the model.CONCLUSION:LbGP pretreatment exhibits dosedependent anti-inflammatory,and antioxidative effects by reducing Caspase-8 expression,preventing declines of SOD activity,and decreasing MDA content in the RIRI rat model.
基金the Indian Institute of Technology, Kharagpur, West Bengal, 721302, for providing technical and financial support for the research。
文摘Millets are widely recognized for their nutritional significance;however, the methods employed for their processing are currently lacking. This article primarily focuses on the advanced technologies and progressions in millet dehulling and polishing. These technologies operate based on the fundamental principles of compression-shearing, abrasion-friction, and centrifugal-impact forces. Processing of millets can be challenging because of the physical characteristics and tight attachment of hull and bran to the endosperm. However, several dehullers have been designed to solve this problem for different kinds of millets. In addition, the nutritional and anti-nutritional characteristics undergo alterations due to both dehulling and polishing processes. These alterations are thoroughly examined and discussed in this article. Specifically, anti-nutrients such as tannins and phytate are predominantly found in the outer pericarp of the grain and experience a reduction after undergoing dehulling and polishing. The nutritional properties are also subjected to a reduction;however, this reduction can be mitigated by subjecting the grains to certain pretreatments before dehulling and polishing. These treatments serve to enhance dehulling efficiency and nutrient digestibility while simultaneously reducing the presence of anti-nutrients. Novel thermal and non-thermal methodologies such as microwave, hydrothermal, high-pressure processing, and ohmic heating can be employed for processing millets, thereby diminishing the loss of nutrients. Additional research can be carried out to investigate their impact on the dehulling and polishing of millets.
基金supported by the National Natural Science Foundation of China(52276195)Program for Supporting Innovative Research from Jinan(202228072)Program of Agricultural Development from Shandong(SD2019NJ015)。
文摘Development of pore structures of activated carbon(AC)from activation of biomass with ZnCl_(2) relies on content and structure of cellulose/hemicellulose in the feedstock.Thermal pretreatment of biomass could induce dehydration and/or aromatization to change the structure of cellulose/hemicellulose.This might interfere with evolution of structures of AC,which was investigated herein via thermal pretreatment of willow branch(WB)from 200 to 360℃and the subsequent activation with ZnCl_(2) at 550℃.The results showed that thermal pretreatment at 360℃(WB-360)could lead to substantial pyrolysis to form biochar,with a yield of 31.9%,accompanying with nearly complete destruction of cellulose crystals and remarkably enhanced aromatic degree.However,cellulose residual in WB-360 could still be activated to form AC-360 with specific surface area of 1837.9 m~2·g^(-1),which was lower than that in AC from activation of untreated WB(AC-blank,2077.8 m~2·g^(-1)).Nonetheless,the AC-200 from activation of WB-200 had more developed pores(2113.9 m~2·g^(-1))and superior capability for adsorption of phenol,due to increased permeability of ZnCl_(2) to the largely intact cellulose structure in WB-200.The thermal pretreatment did increase diameters of micropores of AC but reduced the overall yield of AC(26.8%for AC-blank versus 18.0%for AC-360),resulting from accelerated cracking but reduced intensity of condensation.In-situ infrared characterization of the activation showed that ZnCl_(2) mainly catalyzed dehydration,dehydrogenation,condensation,and aromatization but not cracking,suppressing the formation of derivatives of cellulose and lignin in bio-oil.The thermal pretreatment formed phenolic-OH and C=O with higher chemical innerness,which changed the reaction network in activation,shifting morphology of fibrous structures in AC-blank to“melting surface”in AC-200 or AC-280.
基金Supported by The Fourth Batch of High-end Talent Project in Hebei ProvinceSpecial Project of the Central Government in Guidance of Local Science and Technology Development(226Z5504G)Tangshan Talent Project(A202202005)。
文摘The QuEChERS extraction technique is a pretreatment technique that has been rapidly applied in recent years and is widely used in the field of pesticide residues with many advantages. This technique is based on solid phase extraction (SPE), which uses the interaction between adsorbent and impurities in the matrix to achieve the purpose of purification. The method has easier operation and better purification effect than SPE. In this paper, the research progress of the QuEChERS technique in pesticide residue detection in different fields in recent years and its future development were reviewed, hoping to provide reference for further development and utilization of the QuEChERS technique in pesticide residue detection in the future.
文摘This research was undertaken to study the effect of Zr-enhanced plasma electrolytic oxidation(PEO) as a pretreatment on the corrosion performance of epoxy coating applied on Magnesium in 3.5 wt.% Na Cl solution. The parameters of delamination index along with coating damage index were extracted through electrochemical impedance spectroscopy(EIS) tests to determine how Zr may affect the corrosion protection of duplex PEO/epoxy coated samples. Pull-off adhesion tests were also accomplished to form a better understanding of Zr-enhanced PEO coating’ function. According to the obtained results, the presence of Zr can reduce the damage to the coating system by almost twice.
基金financially supported by the National Key Research and Development Program of China (No. 2021YFC2903202)the National Natural Science Foundations of China (Nos. 51974366, 52174267, 52174270 and 52004250)+2 种基金the China Postdoctoral Science Foundation (No. 2020M680100 and 2020TQ0279)the Postdoctoral Research Grant in Henan Province (No. 202003025)the State Key Laboratory of Mineral Processing and Co-innovation Center for Clean and Efficient Utilization of Strategic Metal Mineral Resources。
文摘Selective surface dissolution was found to be important in spodumene flotation. In this study, we proposed to introduce ultrasound into the pretreatment process to accelerate particle vibration and cavitation, as well as the migration of mineral surface components to solution. Micro-flotation results showed that the flotation recovery of spodumene can be 86.08% by ultrasound pretreatment, but only 39.30% by traditional mechanical agitation pretreatment. Compared with traditional mechanical agitation, ultrasonic pretreatment can shorten the pretreatment process, reduce the dosage of agents, reduce the mechanical agitation speed, and improve the efficiency of the pretreating process. Inductively coupled plasma analysis showed that, in the ultrasonic system, the amount of Li, Al, and Si species in the solution was twice as much as those in the traditional preprocessing system. Moreover, the scanning electron microscope results demonstrated a larger surface dissolution area in the ultrasonic system. X-Ray photoelectron spectroscopy results showed that the atomic concentration of Si species on the spodumene surface decreased, whereas the relative atomic concentrations of Li and Al species increased, indicating that the ultrasound effect strengthened the selective dissolution of elements on the mineral surface.The high-resolution spectra of O 1s showed that more collectors are adsorbed on the mineral surface treated by ultrasonic pretreatment.
基金funded by the National Key R&D Program of China(2020YFD0900900)。
文摘The quality and flavor of scallops changes during the fresh dry rehydration process.In order to control the changes after rehydration,a scallop pretreatment method was adopted.The pretreatment method involved impregnating fresh scallops with 0.2 g/100 m L konjac glucomannan(KGM),carrageenan(CA),and sodium alginate(SA)before the drying and rehydration process.After rehydration,the KGM treated samples had better water retention and the highest betaine content.The CA treated samples had a deepened yellow color and the highest content of flavoring amino acids(FAA)and inosine monophosphate(IMP).What’s more,a total of 77 volatile compounds were detected,with a maximum of 15 esters.The highest proportion in the four groups was eugenol,followed by n-hexadecanoic acid,methyl hexadecanoate etc.The SA group had no significant contribution in terms of quality and taste.The samples pretreated with KGM had the best quality,and those pretreated by CA had the best flavor.
基金This work was supported by the National Natural Science Foundation of China(Grant Nos.51601108 and 52071191)the Natural Science Foundation of Shandong Province(ZR2020ME011).
文摘In this study,the effects of intermetallic compounds(Mg_(17)Al_(12)and Al_(8)Mn_(5))on the Mg-Al layered double hydroxide(LDH)formation mechanism and corrosion behavior of an in-situ LDH/Mg(OH)_(2)steam coatings on AZ80 Mg alloy were investigated.Citric acid(CA)was used to activate the alloy surface during the pretreatment process.The alloy was first pretreated with CA and then subjected to a hydrothermal process using ultrapure water to produce Mg-Al-LDH/Mg(OH)_(2)steam coating.The effect of different time of acid pretreatment on the activation of the intermetallic compounds was investigated.The microstructure and elemental composition of the obtained coatings were analyzed using FE-SEM,EDS,XRD and FT-IR.The corrosion resistance of the coated samples was evaluated using different techniques,i.e.,potentiodynamic polarization(PDP),electrochemical impedance spectrum(EIS)and hydrogen evolution test.The results indicated that the CA pretreatment significantly influenced the activity of the alloy surface by exposing the intermetallic compounds.The surface area fraction of Mg_(17)Al_(12)and Al_(8)Mn_(5)phases on the surface of the alloy was significantly higher after the CA pretreatment,and thus promoted the growth of the subsequent Mg-Al-LDH coatings.The CA pretreatment for 30 s resulted in a denser and thicker LDH coating.Increase in the CA pretreatment time significantly led to the improvement in corrosion resistance of the coated AZ80 alloy.The corrosion current density of the coated alloy was lower by three orders of magnitude as compared to the uncoated alloy.
基金supported by the Natural Science Fund Program of China (No.52306043)the Science and Technology Project of Jiangsu Province (Nos.BE2022604&BE2021701)+2 种基金the Youth Talent Promotion Project of Jiangsu Provincial Association for Science and Technology (No.JSTJ-2022-046)the Inner Mongolia Major Science and Technology Project (No.2021ZD0022)the State Key Laboratory of High-Efficiency Utilization of Coal and Green Chemical Engineering (China) (Nos.2022-K25&2022-K37).
文摘A new method of pretreatment of corn straw with Phanerochaete chrysosporium combined with pyrolysis was proposed to improve the quality of bio-oil.The characterization results demonstrated that microbial pretreatment was an effective method to decrease the lignin,which can achieve a maximum removal rate of 44.19%.Due to the destruction of biomass structure,the content of alkali metal and alkaline earth metal is reduced.Meanwhile,the depolymerized biomass structure created better pyrolysis conditions to promote the pyrolysis efficiency,increase the average decomposition rate of pyrolysis and reduce the residue.In fast pyrolysis,because of the enrichment of cellulose and the removal of lignin,the contents of acids,linear carbonyls,furans,and sugars increased while the contents of phenols decreased.As for the catalytic pyrolysis,due to the hydrocarbon pool reaction and shape selection deoxidation of ZSM-5 catalyst,the total hydrocarbon and aromatics contents can significantly increase up to 34.37%and 30.59%,respectively,with 3 weeks of pretreatment.And the the low molecular content of bio-oil increased after pretreatment,which can significantly benefit the entry of primary pyrolysis steam into the catalyst pores to improve the catalytic efficiency and hydrocarbon contents.This method provides a new treatment idea for high-quality utilization of biomass.
基金This research was funded by the National Natural Science Foundation of China(No.21978104)the Program for the National Key Research and Development Program of China(No.2021YFC2101601).
文摘Hemicellulose and lignin are not reasonably utilized during the dissolved pulp preparation process.This work aimed to propose a process for the co-production of dissolving pulp,furfural,and lignin from eucalyptus.High-grade dissolving pulp was prepared from eucalyptus using a combination of extremely low acid(ELA)pretreatment,Kraft cooking,and elementary chlorine-free(ECF)bleaching.The obtained pre-hydrolysate was catalytic conversion into furfural in a biphasic system,and lignin during Kraft cooking and ECF was recovered.The process condition was discussed as well as the mass flow direction.The results showed that ELA pretreatment could effectively remove 80.1%hemicellulose.Compared with traditional hydrothermal pretreatment,the ELA pretreatment significantly increased the xylose yield from 5.05 to 14.18 g/L at 170℃ for 2 h,which had practical significance for furfural production.The 82.7%furfural yield and 82.9%furfural selectivity were obtained from xylose-rich pre-hydrolysate using NaCl as a phase modifier in a biphasic system with 4-methyl-2-pentanone(MIBK)as an organic phase by ion exchange resin catalysts at 190℃ for 2 h.Subsequently,the pretreated eucalyptus was subjected to Kraft cooking,and the optimal alkali amount was 14%.Then,the Kraft pulp was bleached using the O-D1-EP-D_(2) sequence,and dissolving pulp was obtained with an ISO brightness of 86.0%,viscosity of 463 mL/g,andα-cellulose content of 95.4%.The Kraft lignin which has a potential application was investigated by 2D-HSQC NMR and 31P NMR.The results showed that the S/G ratio of Kraft lignin was 1.93,and the content of phenolic hydroxyl groups was 2.53 mmol/g.Moreover,based on the above proposed process,30.5 g dissolving pulp,5.5 g furfural,and 21.2 g lignin per 100 g eucalyptus chips(oven dry)were produced.This research will provide new catalysis and pulping technical routes for dissolving pulp,furfural,and Kraft lignin products,which are in great demand in the chemical industry.
基金supported by the National Natural Science Foundation of China(22078225)the Natural Science Foundation of Zhejiang Province(LGF22E080025 and LHY22E080005)。
文摘The effects of sulfuric acid-associated mechanical pretreatment on the hydrolysis behavior of pine sawdust were investigated in this study.Sulfuric acid could act as an acidic catalyst to depolymerize holocellulose through cleavage of the glycosidic bonds,the dissociation energies of which were supplied by the impact of a ball on pine sawdust,during milling.The destruction of glycosidic and hydrogen bonds in pine sawdust resulted in a decrease of crystallinity and an increase of water solubility.The sulfuric acid could promote the hydrolysis of holocellulose and its hydrolysis products.It also destroyed the chemical linkages between holocellulose and lignin during ball milling.The cleavage of chemical linkages with holocellulose made lignin more difficult to hydrolyze in subcritical water,and higher activation energy was needed to hydrolyze pretreated pine sawdust at higher reaction temperatures.It also led to the formation of glucose char and aromatic-linked polymer char from the hydrolysis products of holocellulose.
基金Supported by the Technological Project of Heilongjiang Province"the Open Competition Mechanism to Select the Best Candidates"(2022ZXJ05C01-03)。
文摘Corn stalk hydrothermal wastewater(CSHW)was used as a pretreatment for whole-slurry anaerobic co-digestion instead of conventional acid pretreatment.CSHW pretreatment was conducted at 20℃,35℃and 50℃for 3,6 and 9 h,after which all experimental groups were digested at 35℃for 24 days.This pretreatment method efficiently broke the lignocellulose structure of the corn stalk.Different from the volatile fatty acids(VFAs)content,the pH and RS contents were relatively higher than those of the control during the pretreatment process.Furthermore,the highest methane production[185.03 mL•g-1 VS(volatile solid)]was achieved at 55.46%under 35℃in 6 h,which was higher than that of the normal corn stalk anaerobic digestion.The VFAs contents and pH increased compared to CK upon the addition of NaOH to adjust pH,and the RS content also increased slightly due to the degradability of lignocellulose during the whole-slurry anaerobic co-digestion.This work provided a potential method to sustainably treat wastewater and improve fermentation performance.
文摘Background: In developed countries, colon cancer is the second most prevalent cancer, only exceeded by prostate cancer in men and breast cancer in women. After Hepatocellular carcinoma, breast cancer, bladder cancer, lung cancer, Non-Hodgkin Lymphoma and brain tumors, colon cancer is the 7<sup>th</sup> most common cancer in Egypt, in both sexes, representing 3.47% and 3%, in both male and female cancers, respectively. Aim of the Work: The aim of this study was to evaluate the prognostic and predictive significance of pretreatment Neutrophil/lymphocytes ratio (NLR), in terms of disease-free survival (DFS) and recurrence, in high-risk stage II and stage III Colorectal cancer patients who underwent curative resection. Patients and Methods: We retrospectively evaluated 103 patients, who were submitted to upfront surgery as first therapeutic option in curative intent, between January 2017 and December 2018. Pretreatment Neutrophil/lymphocytes ratio (NLR), as well as demographics, clinical, histopathologic, and laboratory data were analyzed. Univariate and multivariate analyses were conducted to identify prognostic factors associated with disease free survival (DFS) and recurrence. Results: The cutoff point of Neutrophils/lymphocytes ratio (NLR) was calculated with Kaplan-Meier curves and log-rank test to 3. This study revealed that neutrophils/lymphocytes ratio (NLR) was significantly associated with disease free survival (p as no difference in efficacy between both chemotherapy regimens FOLFOX and XELOX in both high-risk stage II and stage III colon cancer regarding disease free survival & the toxicity profile associated with each regimen and its grades between patients. Conclusion: Our study suggests that preoperative Neutrophils/lymphocytes ratio (NLR) more than 3 may be an independent prognostic marker for TTR (time to recurrence) in high-risk stage II and stage III colon cancer patients.
基金Funded by the National Key Research and Development Program of China-Intergovernmental International Cooperation in Scientific and Technological Innovation MOST,China (No.2018YFE0107300)。
文摘Two carbonation approaches are considered for studying the effects on the hardening mechanisms of slurries made of 100 wt%electric arc furnace steel slag (EAF) slag or 80 wt%EAF slag incorporating 20 wt% of Portland cement,which are applied during the hot-stage pretreatment with simulated gas for raw steel slag or the accelerated carbonation curing of slurry.The mechanical strengths,carbonate products,microstructures and CO_(2) uptakes were quantitatively investigated.Results manifest that accelerated carbonation curing increases the compressive strengths of steel slag slurry,from 17.1 MPa (binder of 80 wt% EAF and 20 wt%cement under standard moisture curing) to 36.0 MPa (binder of 80 wt%EAF and 20 wt%cement under accelerated carbonation curing),with a CO_(2) uptake of 52%.In contrast,hot-stage carbonation applied during the pretreatment of steel slag increases the compressive strengths to 43.7 MPa (binder of 80 wt%carbonated EAF and 20 wt%cement under accelerated carbonation curing),with a CO_(2) uptake of 67%.Hotstage carbonation of steel slag is found for particle agglomeration,minerals remodeling and calcite formed,thus causing an activated steel slag with a dense structure and more active components.Accelerated carbonation curing of steel slag slurry paste results in the newly formed amorphous CaCO_(3),calcite crystalline and silica gels that covered the pores of the matrix,facilitating microstructure densification and strength improvement.Adopting the combinative methods of the hot-stage CO_(2) pretreatment and accelerated carbonation curing creates a promising high-volume steel slag-based binder with high strengths and CO_(2) storage.
基金The National Natural Science Foundation of China under contract No.41576074the Natural Science Foundation of Fujian Province of China under contract No.2019J01020.
文摘In the open ocean,radium isotopes are useful tracers of residence time and water-mass mixing.However,limited by the measurement resolution of commonly used gamma counters,the low activity of radium in the open ocean makes it necessary to enrich radium from large volumes of seawater and pretreat radium-enriched carriers prior to measurements.The commonly applied method of radium enrichment and pretreatment,however,has limitations of uneven coating of MnO_(2)on cartridges,relatively expensive cartridges,time-consuming issues during cartridge-ashing,ash loss during transfer,and changes of gamma counters efficiency caused by different ash weights.To address these issues,in this study we optimized the enrichment and pretreatment of low-activity radium prior to measurements.Firstly,we replaced commonly used acrylic cartridges with cheaper polypropylene cartridges,which took 6 h to be ashed,42 h shorter than for acrylic cartridges.Secondly,MnO_(2)-coated cartridges were prepared with a circulating hot acidic KMnO_(4)solution to ensure homogeneous coating.The radium extraction efficiency of this MnO_(2)-coated cartridge was 20%-61%higher than that prepared by directly immersing cartridges in the solution.The radium delayed coincidence counter efficiency for MnO_(2)-coated cartridge was stable with a moisture content of 0.05-1.Lastly,after ashing cartridges,instead of directly transferring the ash to a measurement vial,a mixture of hydroxylamine hydrochloride and hydrochloric acid was used to completely leach the ash for long-lived radium,followed by coprecipitation by BaSO_(4),to avoid potential loss of ash during transfer and variations in measurement geometry due to different ash weights.And the recovery of long-lived radium pretreatment was 94%-102%,which improved by 11%compared with the common method.In addition,the radium extraction efficiency of the MnO_(2)-coated cartridge varied from 3%to 4%within the in situ pump working flow rate of 4-7 L/min,which fell within the measurement errors.
基金Supported by the National Key Technology R&D Program during the11~(th)five-year Plan(2007BAD34B03)the Important Project of Ministryof Education(107127)Scientific Research Foundation ofHefei University of Technology(113-036404)~~
文摘[ Objective] The aim was to study pretreatment of ultrasound enhancing dilute H2SO4 on cellulase activity of corn straw liquid fermentation and explore the pretretment＇ s optimal conditions. [ Method ] By using orthogonal test, the pretretment of ultrasound enhancing dilute H2SO4 on corn straw was studied, then straw was fermented as the sole carbon source. Finally, the cellulase activity in extracellular fermentation broth was determined. [Result] The results showed that cellulase activity in extracellular broth was greatest under the conditions of acid bath time 3 h, acid concentration 3.5%, ultrasonic power 150 W, and ultrasonic time 5 h. They were FPA 15.82 U/ml, Cx 39.9 U/ml, 13-Giu 55.94 U/ml respectively. [ Conclusion] Under the above conditions, extracellular cellulase production has a high stability.
文摘It is difficult to directly electroplate Al on Mg alloys. The effects of pretreatment parameters on the corrosion resistance of films obtained on AZ31 Mg alloy surface were studied by using potentiodynamic polarization curves, to produce a compact interfacial layer as zinc-immersion deposition. After the substrate was pretreated under optimized conditions, aluminum was electrodeposited on AZ31 from TMPAC-AlCl3 room temperature ionic liquids. The depositions were characterized by scanning electron microscope equipped with energy dispersion X-ray. The results show that the traditional pretreatment of Mg alloys was successfully used for the Al-electroplating process from TMPAC-AlCl3 ionic liquids. The entire procedure includes alkaline cleaning, chemical pickling, surface activation （400 mL/L HF acid, 10 min）, zinc-immersion （20 min） and anhydrous treatment. A relatively compact zinc-immersion film was prepared on the substrate surface. A silvery-colored satin aluminum deposition was obtained on AZ31 from TMPAC-AlCl3 using direct current plating.
