Aero-engine fan blades of ten use a cavity structure to improve the thrust-to-weight ratio of the aircraft.However,the use of the cavity structure brings a series of difficulties to the manufacturing and processing of...Aero-engine fan blades of ten use a cavity structure to improve the thrust-to-weight ratio of the aircraft.However,the use of the cavity structure brings a series of difficulties to the manufacturing and processing of the blades.Due to the limitation of blade manufacturing technology,it is difficult for the internal cavity structure to achieve the designed contour shape,so the blade has uneven wall thickness and poor consistency,which affects the fatigue performance and airflow dynamic performance of the blade.In order to reduce the influence of uneven wall thickness,this paper proposes a grinding allowance extraction method considering the double dimension constraints(DDC)of the inner and outer contours of the hollow blade.Constrain the two dimensions of the inner and outer contours of the hollow blade.On the premise of satisfying the outer contour constraints,the machining model of the blade is modified according to the distribution of the inwall contour to obtain a more reasonable distribution of the grinding allowance.On the premise of satisfying the contour constraints,according to the distribution of the inwall contour,the machining model of the blade is modified to obtain a more reasonable distribution of the grinding allowance.Through the grinding experiment of the hollow blade,the surface roughness is below Ra0.4μm,and the contour accuracy is between-0.05~0.14 mm,which meets the processing requirements.Compared with the allowance extraction method that only considers the contour,the problem of poor wall thickness consistency can be effectively improved.It can be used to extract the allowance of aero-engine blades with hollow features,which lays a foundation for the study of hollow blade grinding methods with high service performance.展开更多
As the largest source of carbon emissions in China,the thermal power industry is the only emission-controlled industry in the first national carbon market compliance cycle.Its conversion to clean-energy generation tec...As the largest source of carbon emissions in China,the thermal power industry is the only emission-controlled industry in the first national carbon market compliance cycle.Its conversion to clean-energy generation technologies is also an important means of reducing CO_(2)emissions and achieving the carbon peak and carbon neutral commitments.This study used fractional Brownian motion to describe the energy-switching cost and constructed a stochastic optimization model on carbon allowance(CA)trading volume and emission-reduction strategy during compliance period with the Hurst exponent and volatility coefficient in the model estimated.We defined the optimal compliance cost of thermal power enterprises as the form of the unique solution of the Hamilton–Jacobi–Bellman equation by combining the dynamic optimization principle and the fractional It?’s formula.In this manner,we obtained the models for optimal emission reduction and equilibrium CA price.Our numerical analysis revealed that,within a compliance period of 2021–2030,the optimal reductions and desired equilibrium prices of CAs changed concurrently,with an increasing trend annually in different peak-year scenarios.Furthermore,sensitivity analysis revealed that the energy price indirectly affected the equilibrium CA price by influencing the Hurst exponent,the depreciation rate positively impacted the CA price,and increasing the initial CA reduced the optimal reduction and the CA price.Our findings can be used to develop optimal emission-reduction strategies for thermal power enterprises and carbon pricing in the carbon market.展开更多
For thin-walled parts,uniform allowance to each machining surface is allocated by the traditional machining method.Considering the sequence of the adjacent machining features,it may cause poor stiffness for some side ...For thin-walled parts,uniform allowance to each machining surface is allocated by the traditional machining method.Considering the sequence of the adjacent machining features,it may cause poor stiffness for some side walls due to a minor wall thickness,which may cause the deformation of the final formed parts to be large,or deduce machining efficiency for some machining features due to too thick remains.In order to address this issue,a non-uniform allowance allocation method based on interim state stiffness of machining features for the finishing of thin-walled structural parts is proposed in this paper.In this method,the interim state model of machining features is constructed according to the machining sequence of the parts,and the stiffness of the side wall is taken as the evaluation index to allocate reasonable allowance value to the corresponding machining surface to ensure the stiffness requirement of the parts in the machining process.According to the finite element simulation results,the non-uniform allowance allocation method proposed in this paper can effectively improve the stiffness of the parts and reduce the deformation of the parts,when compared with the traditional uniform allowance machining method.展开更多
Poverty–stricken populations must be identified precisely in the fight against poverty to implement the strategy of building a moderately prosperous society in all respects by 2020. The analysis based on the househol...Poverty–stricken populations must be identified precisely in the fight against poverty to implement the strategy of building a moderately prosperous society in all respects by 2020. The analysis based on the household survey in 2013 shows that the targeting accuracy is not high based on the standard of income and the accuracy is higher based on the standard of multidimensional poverty index. But the latter still has a low coverage rate. To gradually achieve integration of the rural poverty line and the rural subsistence allowance line, standards applied to identifying households entitled to subsistence allowances should be changed from the standard of income to multidimensional poverty indexes. A unified standard of subsistence allowances and a unified method for identifying related households should be developed. At the same time, coverage and funding of subsistence allowances should be extended and increased to better meet people's basic needs.展开更多
A balancing technique for casting or forging parts to be machined is presented in this paper.It allows an optimal part setup to make sure that no shortage of material(undercut)will occur during machining.Particularly ...A balancing technique for casting or forging parts to be machined is presented in this paper.It allows an optimal part setup to make sure that no shortage of material(undercut)will occur during machining.Particularly in the heavy part in- dustry,where the resulting casting size and shape may deviate from expectations,the balancing process discovers whether or not the design model is totally enclosed in the actual part to be machined.The alignment is an iterative process involving nonlinear con- strained optimization,which forces data points to lie outside the nominal model under a specific order of priority.Newton methods for non-linear numerical minimization are rarely applied to this problem because of the high cost of computing.In this paper, Newton methods are applied to the balancing of blank part.The aforesaid algorithm is demonstrated in term of a marine propeller blade,and result shows that The Newton methods are more efficient and accurate than those implemented in past research and have distinct advantages compared to the registration methods widely used today.展开更多
In this paper, a reinforcement learning (RL)-based Sarsa temporal-difference (TD) algorithm is applied tosearch for a unified bidding and operation strategy for a coal-fired power plant with monoethanolamine(MEA...In this paper, a reinforcement learning (RL)-based Sarsa temporal-difference (TD) algorithm is applied tosearch for a unified bidding and operation strategy for a coal-fired power plant with monoethanolamine(MEA)-based post-combustion carbon capture under different carbon dioxide (CO2) allowance market con-ditions. The objective of the decision maker for the power plant is to maximize the discounted cumulativeprofit during the power plant lifetime. Two constraints are considered for the objective formulation. Firstly,the tradeoff between the energy-intensive carbon capture and the electricity generation should be made un-der presumed fixed fuel consumption. Secondly, the CO2 allowances purchased from the CO2 allowance mar-ket should be approximately equal to the quantity of COs emission from power generation. Three case stud-ies are demonstrated thereafter. In the first case, we show the convergence of the Sarsa TD algorithm andfind a deterministic optimal bidding and operation strategy. In the second case, compared with the inde-pendently designed operation and bidding strategies discussed in most of the relevant literature, the SarsaTD-based unified bidding and operation strategy with time-varying flexible market-oriented CO2 capturelevels is demonstrated to help the power plant decision maker gain a higher discounted cumulative profit.In the third case, a competitor operating another power plant identical to the preceding plant is consideredunder the same CO2 allowance market. The competitor also has carbon capture facilities but applies a differ-ent strategy to earn profits. The discounted cumulative profits of the two power plants are then compared,thus exhibiting the competitiveness of the power plant that is using the unified bidding and operation strat-egy explored by the Sarsa TD algorithm.展开更多
This paper analyzes the three main fundamental issues in the design of China's ETS pilots,including allowance allocation,price mechanism and state-owned key enterprises,and proposed suggested solutions.For the iss...This paper analyzes the three main fundamental issues in the design of China's ETS pilots,including allowance allocation,price mechanism and state-owned key enterprises,and proposed suggested solutions.For the issue of allowance allocation,we suggest that the gradual hybrid mode could be applied at the beginning,which starts with mainly free allocation and then increases auction ratio gradually.And grandfathering is a suitable method of free allocation.For the issue of price mechanism,we suggest a price floating zone with open market operation to reduce the uncertainty of prices.For the issue of state-owned key enterprises,we suggest a good coordination with SASAC,defining the state-owned property right and supervision right when state-owned key enterprises are involved into the carbon market,and the local government can set rules of allocation and transaction to limit their potential market power.展开更多
On October 29, 2011, a number of cities and provinces in China were chosen to host pilot locations for carbon emissions trading systems. Before a carbon trading market can be functional, carbon emission allowances nee...On October 29, 2011, a number of cities and provinces in China were chosen to host pilot locations for carbon emissions trading systems. Before a carbon trading market can be functional, carbon emission allowances need to be allocated. This makes the carbon emissions allowance allocation scheme crucially important as it goes a long way in deciding the effi ciency and fairness of the carbon cap-andtrade market. Although it has been proved that allocation by auction is the most effective way, Shenzhen city as one of the trading pilots will allocate carbon allowances free of charge at the initial stage. The European Union's(EU) free allocation system, a product-based benchmark scheme for the manufacturing industry implement in 2013, is not feasible for Shenzhen due to the lack of data at a product level. Therefore the target of this paper is to explore a new allocation scheme with the data at a fi rm level other than the grandfathering scheme to fi ll the gap. In this paper, a carbon intensity based allocation scheme is developed by using the Boltzmann distribution and Gail- Shapley game. In the fi nal part of the report, fi rm level data from 2010 to 2011 of fi rms in Shenzhen, China are used to verify the effect and fi tness of the allocation scheme.展开更多
Owing to reliability and high strength-to-weight ratio,large thin-walled components are widely used in the aviation and aerospace industry.Due to the complex features and sequence involved in the machining process of ...Owing to reliability and high strength-to-weight ratio,large thin-walled components are widely used in the aviation and aerospace industry.Due to the complex features and sequence involved in the machining process of large thin-walled components,machining deformation of component is easy to exceed the specification.In order to address the problem,it is important to retain the appropriate finishing allowance.To find the overall machining deformation,finishing allowance-induced deformation(web finishing allowance,sidewall finishing allowance)and initial residual stress-induced deformation were considered as major factors.Meanwhile,machined surface residual stress-induced deformation,clamping stress-induced deformation,thermal deformation,gravity-induced deformation and inertial force-induced deformation were neglected in the optimization model.Six-peak Gaussian function was introduced to fit the initial residual stress.Based upon the obtained function of initial residual stress,a deformation prediction model between initial residual stress and finishing allowance was established to attain the finishing allowanceinduced deformation.In addition,linear programming optimization model based on the simplex algorithm was developed to optimize the overall machining deformation.Results have concluded that the overall machining deformation reached the minimum value when sidewall finishing allowance and web finishing allowance varied between 1 and 2 mm.Additionally,web finishing allowance-induced deformation and sidewall finishing allowance-induced deformation were1.05 mm and 0.7 mm.Furthermore,the machining deformation decreased to 0.3–0.38 mm with the application of optimized finishing allowance allocation strategy,which made 39–56%reduction of the overall machining deformation compared to that in conventional method.展开更多
Motivated by recent realizations of spin-1 NaRb mixtures in the experiments[Phys.Rev.Lett.114,255301(2015);Phys.Rev.Lett.128,223201(2022)],we investigate heteronuclear magnetism in the Mott-insulating regime.Different...Motivated by recent realizations of spin-1 NaRb mixtures in the experiments[Phys.Rev.Lett.114,255301(2015);Phys.Rev.Lett.128,223201(2022)],we investigate heteronuclear magnetism in the Mott-insulating regime.Different from the identical mixtures where the boson statistics only admits even parity states from angular momentum composition,for heteronuclear atoms in principle all angular momentum states are allowed,which can give rise to new magnetic phases.While various magnetic phases can be developed over these degenerate spaces,the concrete symmetry breaking phases depend on not only the degree of degeneracy but also the competitions from many-body interactions.We unveil these rich phases using the bosonic dynamical mean-field theory approach.These phases are characterized by various orders,including spontaneous magnetization order,spin magnitude order,singlet pairing order,and nematic order,which may coexist specially in the regime with odd parity.Finally we address the possible parameter regimes for observing these spin-ordered Mott phases.展开更多
IT has become an urgent subject with the wider application of REE to study the effects of REE on environ- ment and human health. Some important REE toxicology data were obtained previously based on acuteand sub-chroni...IT has become an urgent subject with the wider application of REE to study the effects of REE on environ- ment and human health. Some important REE toxicology data were obtained previously based on acuteand sub-chronic toxicity experiments on animals, but these results are indirect and suspectable becausethe REE compounds used in the experiments are different from those in food chains, and there still existsome uncertainties when the results are extrapolated from animals to human beings. This note focuses thebio-effects of REE on population from two typical REE-high areas in South Jiangxi, China, where theweathering crust-ion adsorbed-type REE ore deposits are widespread, and also on the estimation of dailyREE intake allowance in terms of REE contents and distribution in food chains. 1 Geologic setting and studying展开更多
Deformation resulting from residual stress has been a significant issue in machining.As allowance allocation can directly impact the residual stress on part deformation,it is essential for deformation control.However,...Deformation resulting from residual stress has been a significant issue in machining.As allowance allocation can directly impact the residual stress on part deformation,it is essential for deformation control.However,it is difficult to adjust allowance allocation by traditional simulation methods based on residual stress,as the residual stress cannot be accurately measured or predicted,and many unexpected factors during machining process cannot be simulated accurately.Different from traditional methods,this paper proposes an allowance allocation method based on dynamic approximation via online inspection data for deformation control of structural parts.An Autoregressive Integrated Moving Average(ARIMA)model for dynamic allowance allocation is established so as to approach the minimum deformation,which is based on the in-process deformation inspection data during the alternative machining process of upside and downside.The effectiveness of the method is verified both by simulation cases and real machining experiments of aircraft structural parts,and the results show that part deformation can be significantly reduced.展开更多
Climate change has become one of the most important issues for the sustainable development of social well-being.China has made great efforts in reducing CO2 emissions and promoting clean energy.Pilot Emission Trading ...Climate change has become one of the most important issues for the sustainable development of social well-being.China has made great efforts in reducing CO2 emissions and promoting clean energy.Pilot Emission Trading Systems(ETSs)have been launched in two provinces and five cities in China,and a national level ETS will be implemented in the third quarter of 2017,with preparations for China’s national ETS now well under way.In the meantime,a new round of China’s electric power system reform has entered the implementation stage.Policy variables from both electricity and emission markets willimpose potential risks on the operation of generation companies(Gen Cos).Under this situation,by selecting key variables in each domain,this paper analyzes the combined effects of different allowance allocation methods and power dispatching models on power system emission.Key parameters are set based on a provincial power system in China,and the case studies are conducted based on dynamic simulation platform for macro-energy systems(DSMES)software developed by the authors.The selected power dispatching models include planned dispatch,energy saving power generation dispatch and economic dispatch.The selected initial allowance allocation methods in the emission market include the grandfathering method based on historical emissions and the benchmarking method based on actual output.Based on the simulation results and discussions,several policy implications are highlighted to help to design an effective emission market in China.展开更多
Introduction: The Six Sigma methodology is an opportunity for a better understanding of the performance of analytical methods and for a better adaptation of the quality control management policy of the medical biology...Introduction: The Six Sigma methodology is an opportunity for a better understanding of the performance of analytical methods and for a better adaptation of the quality control management policy of the medical biology laboratory. Using the sigma metric, this study assessed the performance of the Biochemistry analytical system of a medical biology laboratory in Côte d'Ivoire. Methods: Six Sigma methodology was applied to 3 analytes (alanine aminotransferase, glucose and creatinine). Performance indicators such as measurement imprecision and bias were determined based on the results of internal and external quality controls. The sigma number was calculated using the total allowable error values proposed by Ricos et al. Results: For both control levels, ALT had a sigma number greater than 6 (7.6 for normal control and 7.9 for pathological control). However, low sigma numbers, less than or equal to 2 for creatinine (1.4 for normal control and 2 for pathological control) and less than 1 for glucose were found. Conclusion: This study revealed good analytical performance of ALT from the point of view of 6 sigma analysis. However, modifications to the overall quality control procedure for glucose and creatinine are needed to improve their analytical performance. The study should be extended to the entire laboratory’s analytes in order to modify the strategies of quality control procedures based on metric analysis for an overall improvement in analytical performance.展开更多
Innovations in sequencing technology and the development of bioinformatics have allowed for studies of the genomics of many rice pests.At present,draft genomes of rice pests including Nilaparvata lugens,Sogatella furc...Innovations in sequencing technology and the development of bioinformatics have allowed for studies of the genomics of many rice pests.At present,draft genomes of rice pests including Nilaparvata lugens,Sogatella furcifera,Laodelphax striatellus,Sesamia inferens,Chilo suppressalis,Scirpophaga incertulas.展开更多
A simple extension of the standard model(SM) with a μ-flavored vector-like lepton(VLL) doublet and a real singlet scalar can have an interesting implication to the h→μ^(+)μ^(-)decay while offering the simplest pos...A simple extension of the standard model(SM) with a μ-flavored vector-like lepton(VLL) doublet and a real singlet scalar can have an interesting implication to the h→μ^(+)μ^(-)decay while offering the simplest possible explanation for the dark matter(DM) phenomenology.Assuming the real singlet scalar to be a viable DM candidate,it has been shown that the muon Yukawa coupling can have a negative contribution at the oneloop order if the 2^(nd) generation SM leptons are allowed to couple with the VLL doublet.The stringent direct detection bounds corresponding to a real singlet scalar DM can easily be relaxed if the SM quark sector was augmented with a dimension-6 operator at some new physics(NP) scale Λ_(NP).Thus,this model presents a significant phenomenological study where the muon Yukawa coupling can be corrected within a real singlet scalar DM framework.The considered parameter space can be tested/constrained through the high luminosity run of the LHC(HL-LHC) and future direct detection experiments.展开更多
In an experiment carried out at the Prague Asterix Laser System at laser intensities relevant to shock ignition conditions(I>10^(16) W/cm^(2)),the heating and transport of hot electrons were studied by using severa...In an experiment carried out at the Prague Asterix Laser System at laser intensities relevant to shock ignition conditions(I>10^(16) W/cm^(2)),the heating and transport of hot electrons were studied by using several complementary diagnostics,i.e.,K_(α)time-resolved imaging,hard x-ray filtering(a bremsstrahlung cannon),and electron spectroscopy.Ablators with differing composition from low Z(parylene N)to high Z(nickel)were used in multilayer planar targets to produce plasmas with different coronal temperature and collisionality and modify the conditions of hot-electron generation.The variety of available diagnostics allowed full characterization of the population of hot electrons,retrieving their conversion efficiency,time generation and duration,temperature,and angular divergence.The obtained results are shown to be consistent with those from detailed simulations and similar inertial confinement fusion experiments.Based on the measured data,the advantages,reliability,and complementarity of the experimental diagnostics are discussed.展开更多
The multiplication of heavy vehicle axles and road overloads are phenomena that are becoming increasingly important on the road network of the WAEMU community. These phenomena, although framed by standards, have an im...The multiplication of heavy vehicle axles and road overloads are phenomena that are becoming increasingly important on the road network of the WAEMU community. These phenomena, although framed by standards, have an impact on the durability of pavements. In this manuscript it is a question of evaluating the life of the road under the effect of traffic of these multi-axle vehicles and the different tolerances of overloads observed on the road network. To achieve this, a modeling of a bituminous pavement was made with the software ALIZE Lcpc Version 231 based on the principle of the French method of sizing. An inventory of multi-axle heavy goods vehicles was also made on a road with a weighing station. This traffic counting made it possible to classify heavy goods vehicles into three categories, namely: 1) trucks, 2) dual-wheeled semi-trailers and 3) single-wheeled semi-trailers. The results obtained show that in terms of aggressiveness, single-wheeled semi-trailers are the most aggressive, followed by heavy goods vehicles in the category of trucks with more than five axles and semi-trailers with dual wheels with more than seven axles. The durability of the road depends on the aggressiveness of heavy goods vehicles, it was found that the tolerance threshold for overloads of 15% of the total permissible rolling weight (TARW) or the total permissible laden weight (TALW) currently granted in the Community area needs to be reviewed. For durable road surfaces, this tolerance may only be allowed for heavy goods vehicles of type P11, P12 and P13. The 5% tolerance can be applied to all vehicles except heavy goods vehicles with single wheels.展开更多
EXCERPTS FROM MAJOR CHINESE MAGAZINES THE WANDERING POET Sanlian Lifeweek 2 October The immense box office success of Chang’An,a Chinese animated film released this summer,has allowed many people to rediscover Li Bai...EXCERPTS FROM MAJOR CHINESE MAGAZINES THE WANDERING POET Sanlian Lifeweek 2 October The immense box office success of Chang’An,a Chinese animated film released this summer,has allowed many people to rediscover Li Bai,a Tang Dynasty(618-907)poet who rivals his contemporary Du Fu for the title of China’s greatest poet of all time.A romantic in his view of life and also in his verse,Li is much loved for both his wildly imaginative poems and his carefree lifestyle.The poet was always on the move.展开更多
基金Supported by National Natural Science Foundation of China(Grant No.U1908232)National Science and Technology Major Project(Grant No.2017-VII-0002-0095).
文摘Aero-engine fan blades of ten use a cavity structure to improve the thrust-to-weight ratio of the aircraft.However,the use of the cavity structure brings a series of difficulties to the manufacturing and processing of the blades.Due to the limitation of blade manufacturing technology,it is difficult for the internal cavity structure to achieve the designed contour shape,so the blade has uneven wall thickness and poor consistency,which affects the fatigue performance and airflow dynamic performance of the blade.In order to reduce the influence of uneven wall thickness,this paper proposes a grinding allowance extraction method considering the double dimension constraints(DDC)of the inner and outer contours of the hollow blade.Constrain the two dimensions of the inner and outer contours of the hollow blade.On the premise of satisfying the outer contour constraints,the machining model of the blade is modified according to the distribution of the inwall contour to obtain a more reasonable distribution of the grinding allowance.On the premise of satisfying the contour constraints,according to the distribution of the inwall contour,the machining model of the blade is modified to obtain a more reasonable distribution of the grinding allowance.Through the grinding experiment of the hollow blade,the surface roughness is below Ra0.4μm,and the contour accuracy is between-0.05~0.14 mm,which meets the processing requirements.Compared with the allowance extraction method that only considers the contour,the problem of poor wall thickness consistency can be effectively improved.It can be used to extract the allowance of aero-engine blades with hollow features,which lays a foundation for the study of hollow blade grinding methods with high service performance.
基金like to thank Major Program of National Philosophy and Social Science Foundation of China(Grant No.21ZDA086)National Natural Science Foundation of China(Grant No.71974188),and Jiangsu Soft Science Fund(Grant No.BR2022007).
文摘As the largest source of carbon emissions in China,the thermal power industry is the only emission-controlled industry in the first national carbon market compliance cycle.Its conversion to clean-energy generation technologies is also an important means of reducing CO_(2)emissions and achieving the carbon peak and carbon neutral commitments.This study used fractional Brownian motion to describe the energy-switching cost and constructed a stochastic optimization model on carbon allowance(CA)trading volume and emission-reduction strategy during compliance period with the Hurst exponent and volatility coefficient in the model estimated.We defined the optimal compliance cost of thermal power enterprises as the form of the unique solution of the Hamilton–Jacobi–Bellman equation by combining the dynamic optimization principle and the fractional It?’s formula.In this manner,we obtained the models for optimal emission reduction and equilibrium CA price.Our numerical analysis revealed that,within a compliance period of 2021–2030,the optimal reductions and desired equilibrium prices of CAs changed concurrently,with an increasing trend annually in different peak-year scenarios.Furthermore,sensitivity analysis revealed that the energy price indirectly affected the equilibrium CA price by influencing the Hurst exponent,the depreciation rate positively impacted the CA price,and increasing the initial CA reduced the optimal reduction and the CA price.Our findings can be used to develop optimal emission-reduction strategies for thermal power enterprises and carbon pricing in the carbon market.
基金supported by the National Science and Technology Major Project of the Ministry of Science and Technology of China(No.2015ZX04001002).
文摘For thin-walled parts,uniform allowance to each machining surface is allocated by the traditional machining method.Considering the sequence of the adjacent machining features,it may cause poor stiffness for some side walls due to a minor wall thickness,which may cause the deformation of the final formed parts to be large,or deduce machining efficiency for some machining features due to too thick remains.In order to address this issue,a non-uniform allowance allocation method based on interim state stiffness of machining features for the finishing of thin-walled structural parts is proposed in this paper.In this method,the interim state model of machining features is constructed according to the machining sequence of the parts,and the stiffness of the side wall is taken as the evaluation index to allocate reasonable allowance value to the corresponding machining surface to ensure the stiffness requirement of the parts in the machining process.According to the finite element simulation results,the non-uniform allowance allocation method proposed in this paper can effectively improve the stiffness of the parts and reduce the deformation of the parts,when compared with the traditional uniform allowance machining method.
基金sponsored by "Construction of China’s Income Distribution Database",key project funded by the National Natural Science Foundation of China"Research on China’s Income Distribution and Labor Market",an interdisciplinary construction project launched by Beijing Normal University
文摘Poverty–stricken populations must be identified precisely in the fight against poverty to implement the strategy of building a moderately prosperous society in all respects by 2020. The analysis based on the household survey in 2013 shows that the targeting accuracy is not high based on the standard of income and the accuracy is higher based on the standard of multidimensional poverty index. But the latter still has a low coverage rate. To gradually achieve integration of the rural poverty line and the rural subsistence allowance line, standards applied to identifying households entitled to subsistence allowances should be changed from the standard of income to multidimensional poverty indexes. A unified standard of subsistence allowances and a unified method for identifying related households should be developed. At the same time, coverage and funding of subsistence allowances should be extended and increased to better meet people's basic needs.
文摘A balancing technique for casting or forging parts to be machined is presented in this paper.It allows an optimal part setup to make sure that no shortage of material(undercut)will occur during machining.Particularly in the heavy part in- dustry,where the resulting casting size and shape may deviate from expectations,the balancing process discovers whether or not the design model is totally enclosed in the actual part to be machined.The alignment is an iterative process involving nonlinear con- strained optimization,which forces data points to lie outside the nominal model under a specific order of priority.Newton methods for non-linear numerical minimization are rarely applied to this problem because of the high cost of computing.In this paper, Newton methods are applied to the balancing of blank part.The aforesaid algorithm is demonstrated in term of a marine propeller blade,and result shows that The Newton methods are more efficient and accurate than those implemented in past research and have distinct advantages compared to the registration methods widely used today.
文摘In this paper, a reinforcement learning (RL)-based Sarsa temporal-difference (TD) algorithm is applied tosearch for a unified bidding and operation strategy for a coal-fired power plant with monoethanolamine(MEA)-based post-combustion carbon capture under different carbon dioxide (CO2) allowance market con-ditions. The objective of the decision maker for the power plant is to maximize the discounted cumulativeprofit during the power plant lifetime. Two constraints are considered for the objective formulation. Firstly,the tradeoff between the energy-intensive carbon capture and the electricity generation should be made un-der presumed fixed fuel consumption. Secondly, the CO2 allowances purchased from the CO2 allowance mar-ket should be approximately equal to the quantity of COs emission from power generation. Three case stud-ies are demonstrated thereafter. In the first case, we show the convergence of the Sarsa TD algorithm andfind a deterministic optimal bidding and operation strategy. In the second case, compared with the inde-pendently designed operation and bidding strategies discussed in most of the relevant literature, the SarsaTD-based unified bidding and operation strategy with time-varying flexible market-oriented CO2 capturelevels is demonstrated to help the power plant decision maker gain a higher discounted cumulative profit.In the third case, a competitor operating another power plant identical to the preceding plant is consideredunder the same CO2 allowance market. The competitor also has carbon capture facilities but applies a differ-ent strategy to earn profits. The discounted cumulative profits of the two power plants are then compared,thus exhibiting the competitiveness of the power plant that is using the unified bidding and operation strat-egy explored by the Sarsa TD algorithm.
基金supported by Asian CORE program"Manufacturing and Environmental Management in East Asia" of the Japan Society for the Promotion of Science(JSPS)supported by the 2010 Key Project of Philosophy and Social Sciences Research,Ministry of Education:"Research on China's Emissions Trading System under Low-carbon Economy Transformation"(Grant No.10JZD0018)+1 种基金the New Century Excellent Talents Support Plan,Ministry of Education(Grant No.NCET-10-0646)the Key Project of the National Social Science Foundation of China(Grant No.12&ZD059)
文摘This paper analyzes the three main fundamental issues in the design of China's ETS pilots,including allowance allocation,price mechanism and state-owned key enterprises,and proposed suggested solutions.For the issue of allowance allocation,we suggest that the gradual hybrid mode could be applied at the beginning,which starts with mainly free allocation and then increases auction ratio gradually.And grandfathering is a suitable method of free allocation.For the issue of price mechanism,we suggest a price floating zone with open market operation to reduce the uncertainty of prices.For the issue of state-owned key enterprises,we suggest a good coordination with SASAC,defining the state-owned property right and supervision right when state-owned key enterprises are involved into the carbon market,and the local government can set rules of allocation and transaction to limit their potential market power.
基金fund from the Shenzhen Development and Reform Commission
文摘On October 29, 2011, a number of cities and provinces in China were chosen to host pilot locations for carbon emissions trading systems. Before a carbon trading market can be functional, carbon emission allowances need to be allocated. This makes the carbon emissions allowance allocation scheme crucially important as it goes a long way in deciding the effi ciency and fairness of the carbon cap-andtrade market. Although it has been proved that allocation by auction is the most effective way, Shenzhen city as one of the trading pilots will allocate carbon allowances free of charge at the initial stage. The European Union's(EU) free allocation system, a product-based benchmark scheme for the manufacturing industry implement in 2013, is not feasible for Shenzhen due to the lack of data at a product level. Therefore the target of this paper is to explore a new allocation scheme with the data at a fi rm level other than the grandfathering scheme to fi ll the gap. In this paper, a carbon intensity based allocation scheme is developed by using the Boltzmann distribution and Gail- Shapley game. In the fi nal part of the report, fi rm level data from 2010 to 2011 of fi rms in Shenzhen, China are used to verify the effect and fi tness of the allocation scheme.
基金co-supported by the National Natural Science Foundation of China(No.51405226)Postgraduate Research&Practice Innovation Program of Jiangsu Province of China(No.KYCX19_0165)。
文摘Owing to reliability and high strength-to-weight ratio,large thin-walled components are widely used in the aviation and aerospace industry.Due to the complex features and sequence involved in the machining process of large thin-walled components,machining deformation of component is easy to exceed the specification.In order to address the problem,it is important to retain the appropriate finishing allowance.To find the overall machining deformation,finishing allowance-induced deformation(web finishing allowance,sidewall finishing allowance)and initial residual stress-induced deformation were considered as major factors.Meanwhile,machined surface residual stress-induced deformation,clamping stress-induced deformation,thermal deformation,gravity-induced deformation and inertial force-induced deformation were neglected in the optimization model.Six-peak Gaussian function was introduced to fit the initial residual stress.Based upon the obtained function of initial residual stress,a deformation prediction model between initial residual stress and finishing allowance was established to attain the finishing allowanceinduced deformation.In addition,linear programming optimization model based on the simplex algorithm was developed to optimize the overall machining deformation.Results have concluded that the overall machining deformation reached the minimum value when sidewall finishing allowance and web finishing allowance varied between 1 and 2 mm.Additionally,web finishing allowance-induced deformation and sidewall finishing allowance-induced deformation were1.05 mm and 0.7 mm.Furthermore,the machining deformation decreased to 0.3–0.38 mm with the application of optimized finishing allowance allocation strategy,which made 39–56%reduction of the overall machining deformation compared to that in conventional method.
基金supported by the Strategic Priority Research Program of the Chinese Academy of Sciences(Grant No.XDB0500000)the Innovation Program for Quantum Science and Technology(Grant No.2021ZD0301200)+1 种基金the National Natural Science Foundation of China(Grant Nos.12074431,12274384,and 12374252)the Excellent Youth Foundation of Hunan Scientific Committee(Grant No.2021JJ10044).
文摘Motivated by recent realizations of spin-1 NaRb mixtures in the experiments[Phys.Rev.Lett.114,255301(2015);Phys.Rev.Lett.128,223201(2022)],we investigate heteronuclear magnetism in the Mott-insulating regime.Different from the identical mixtures where the boson statistics only admits even parity states from angular momentum composition,for heteronuclear atoms in principle all angular momentum states are allowed,which can give rise to new magnetic phases.While various magnetic phases can be developed over these degenerate spaces,the concrete symmetry breaking phases depend on not only the degree of degeneracy but also the competitions from many-body interactions.We unveil these rich phases using the bosonic dynamical mean-field theory approach.These phases are characterized by various orders,including spontaneous magnetization order,spin magnitude order,singlet pairing order,and nematic order,which may coexist specially in the regime with odd parity.Finally we address the possible parameter regimes for observing these spin-ordered Mott phases.
文摘IT has become an urgent subject with the wider application of REE to study the effects of REE on environ- ment and human health. Some important REE toxicology data were obtained previously based on acuteand sub-chronic toxicity experiments on animals, but these results are indirect and suspectable becausethe REE compounds used in the experiments are different from those in food chains, and there still existsome uncertainties when the results are extrapolated from animals to human beings. This note focuses thebio-effects of REE on population from two typical REE-high areas in South Jiangxi, China, where theweathering crust-ion adsorbed-type REE ore deposits are widespread, and also on the estimation of dailyREE intake allowance in terms of REE contents and distribution in food chains. 1 Geologic setting and studying
基金co-supported by the National Natural Science Foundation of China(No.51775278)National Science Fund of China for Distinguished Young Scholars(No.51925505)。
文摘Deformation resulting from residual stress has been a significant issue in machining.As allowance allocation can directly impact the residual stress on part deformation,it is essential for deformation control.However,it is difficult to adjust allowance allocation by traditional simulation methods based on residual stress,as the residual stress cannot be accurately measured or predicted,and many unexpected factors during machining process cannot be simulated accurately.Different from traditional methods,this paper proposes an allowance allocation method based on dynamic approximation via online inspection data for deformation control of structural parts.An Autoregressive Integrated Moving Average(ARIMA)model for dynamic allowance allocation is established so as to approach the minimum deformation,which is based on the in-process deformation inspection data during the alternative machining process of upside and downside.The effectiveness of the method is verified both by simulation cases and real machining experiments of aircraft structural parts,and the results show that part deformation can be significantly reduced.
基金supported by The National Key Research and Development Program of China(Basic Research Class 2017YFB0903000)-Basic Theories and Methods of Analysis and Control of the Cyber Physical Systems for Power Gridthe State Grid Corporation of China‘‘Key technologies research on carbon asset management of transmission company’’and Major Consulting Project of Chinese Academy of Engineering(No.2016-ZD-07)
文摘Climate change has become one of the most important issues for the sustainable development of social well-being.China has made great efforts in reducing CO2 emissions and promoting clean energy.Pilot Emission Trading Systems(ETSs)have been launched in two provinces and five cities in China,and a national level ETS will be implemented in the third quarter of 2017,with preparations for China’s national ETS now well under way.In the meantime,a new round of China’s electric power system reform has entered the implementation stage.Policy variables from both electricity and emission markets willimpose potential risks on the operation of generation companies(Gen Cos).Under this situation,by selecting key variables in each domain,this paper analyzes the combined effects of different allowance allocation methods and power dispatching models on power system emission.Key parameters are set based on a provincial power system in China,and the case studies are conducted based on dynamic simulation platform for macro-energy systems(DSMES)software developed by the authors.The selected power dispatching models include planned dispatch,energy saving power generation dispatch and economic dispatch.The selected initial allowance allocation methods in the emission market include the grandfathering method based on historical emissions and the benchmarking method based on actual output.Based on the simulation results and discussions,several policy implications are highlighted to help to design an effective emission market in China.
文摘Introduction: The Six Sigma methodology is an opportunity for a better understanding of the performance of analytical methods and for a better adaptation of the quality control management policy of the medical biology laboratory. Using the sigma metric, this study assessed the performance of the Biochemistry analytical system of a medical biology laboratory in Côte d'Ivoire. Methods: Six Sigma methodology was applied to 3 analytes (alanine aminotransferase, glucose and creatinine). Performance indicators such as measurement imprecision and bias were determined based on the results of internal and external quality controls. The sigma number was calculated using the total allowable error values proposed by Ricos et al. Results: For both control levels, ALT had a sigma number greater than 6 (7.6 for normal control and 7.9 for pathological control). However, low sigma numbers, less than or equal to 2 for creatinine (1.4 for normal control and 2 for pathological control) and less than 1 for glucose were found. Conclusion: This study revealed good analytical performance of ALT from the point of view of 6 sigma analysis. However, modifications to the overall quality control procedure for glucose and creatinine are needed to improve their analytical performance. The study should be extended to the entire laboratory’s analytes in order to modify the strategies of quality control procedures based on metric analysis for an overall improvement in analytical performance.
基金supported by the Zhejiang Provincial Key Research and Development Plan, China(Grant Nos.2020C02001 and 2022C02034)the National Natural Science Foundation of China(Grant No.31672022)。
文摘Innovations in sequencing technology and the development of bioinformatics have allowed for studies of the genomics of many rice pests.At present,draft genomes of rice pests including Nilaparvata lugens,Sogatella furcifera,Laodelphax striatellus,Sesamia inferens,Chilo suppressalis,Scirpophaga incertulas.
文摘A simple extension of the standard model(SM) with a μ-flavored vector-like lepton(VLL) doublet and a real singlet scalar can have an interesting implication to the h→μ^(+)μ^(-)decay while offering the simplest possible explanation for the dark matter(DM) phenomenology.Assuming the real singlet scalar to be a viable DM candidate,it has been shown that the muon Yukawa coupling can have a negative contribution at the oneloop order if the 2^(nd) generation SM leptons are allowed to couple with the VLL doublet.The stringent direct detection bounds corresponding to a real singlet scalar DM can easily be relaxed if the SM quark sector was augmented with a dimension-6 operator at some new physics(NP) scale Λ_(NP).Thus,this model presents a significant phenomenological study where the muon Yukawa coupling can be corrected within a real singlet scalar DM framework.The considered parameter space can be tested/constrained through the high luminosity run of the LHC(HL-LHC) and future direct detection experiments.
基金This work was carried out within the framework of the EUROfusion Consortium,funded by the European Union via the Euratom Research and Training Programme(Grant No.101052200-EUROfusion)Views and opinions expressed are however those of the authors only and do not necessarily reflect those of the European Union or the European Commission.Neither the European Union nor the European Commission can be held responsible for them.The involved teams have operated within the framework of the Enabling Research Project:Grant No.ENR-IFE.01.CEA“Advancing shock ignition for direct-drive inertial fusion.”The work was also supported by the Natural Sciences and Engineering Research Council of Canada(Grant No.RGPIN-2019-05013)+5 种基金The authors acknowledge support of the PALS Infrastructure within the MŠMT(MEYS)project Grant No.LM2023068Staff members of the PALS Research Center appreciate financial support(Grant No.LM2023068)from the Czech Ministry of Education,Youth and Sports facilitating operation of the PALS facilityThe work of JIHT RAS team was supported by the Ministry of Science and Higher Education of the Russian Federation(State Assignment No.075-01129-23-00)The work at NRMU MEPhI was supported by the Ministry of Science and Higher Education of the Russian Federation(Agreement No.075-15-2021-1361)This project has received funding from the CNR funded Italian research Network ELI-Italy(D.M.No.63108.08.2016)This work was funded by United Kingdom EPSRC Grants No.EP/P026796/1 and No.EP/L01663X/1.The results presented in this paper are based on work carried out between September 2018 and December 2021.
文摘In an experiment carried out at the Prague Asterix Laser System at laser intensities relevant to shock ignition conditions(I>10^(16) W/cm^(2)),the heating and transport of hot electrons were studied by using several complementary diagnostics,i.e.,K_(α)time-resolved imaging,hard x-ray filtering(a bremsstrahlung cannon),and electron spectroscopy.Ablators with differing composition from low Z(parylene N)to high Z(nickel)were used in multilayer planar targets to produce plasmas with different coronal temperature and collisionality and modify the conditions of hot-electron generation.The variety of available diagnostics allowed full characterization of the population of hot electrons,retrieving their conversion efficiency,time generation and duration,temperature,and angular divergence.The obtained results are shown to be consistent with those from detailed simulations and similar inertial confinement fusion experiments.Based on the measured data,the advantages,reliability,and complementarity of the experimental diagnostics are discussed.
文摘The multiplication of heavy vehicle axles and road overloads are phenomena that are becoming increasingly important on the road network of the WAEMU community. These phenomena, although framed by standards, have an impact on the durability of pavements. In this manuscript it is a question of evaluating the life of the road under the effect of traffic of these multi-axle vehicles and the different tolerances of overloads observed on the road network. To achieve this, a modeling of a bituminous pavement was made with the software ALIZE Lcpc Version 231 based on the principle of the French method of sizing. An inventory of multi-axle heavy goods vehicles was also made on a road with a weighing station. This traffic counting made it possible to classify heavy goods vehicles into three categories, namely: 1) trucks, 2) dual-wheeled semi-trailers and 3) single-wheeled semi-trailers. The results obtained show that in terms of aggressiveness, single-wheeled semi-trailers are the most aggressive, followed by heavy goods vehicles in the category of trucks with more than five axles and semi-trailers with dual wheels with more than seven axles. The durability of the road depends on the aggressiveness of heavy goods vehicles, it was found that the tolerance threshold for overloads of 15% of the total permissible rolling weight (TARW) or the total permissible laden weight (TALW) currently granted in the Community area needs to be reviewed. For durable road surfaces, this tolerance may only be allowed for heavy goods vehicles of type P11, P12 and P13. The 5% tolerance can be applied to all vehicles except heavy goods vehicles with single wheels.
文摘EXCERPTS FROM MAJOR CHINESE MAGAZINES THE WANDERING POET Sanlian Lifeweek 2 October The immense box office success of Chang’An,a Chinese animated film released this summer,has allowed many people to rediscover Li Bai,a Tang Dynasty(618-907)poet who rivals his contemporary Du Fu for the title of China’s greatest poet of all time.A romantic in his view of life and also in his verse,Li is much loved for both his wildly imaginative poems and his carefree lifestyle.The poet was always on the move.