To deepen the understanding in the effect of potassium lactate on the sensory quality and safety of Rugao ham,sensory attributes,physicochemical parameters,total volatile basic nitrogen(TVBN),microorganism community a...To deepen the understanding in the effect of potassium lactate on the sensory quality and safety of Rugao ham,sensory attributes,physicochemical parameters,total volatile basic nitrogen(TVBN),microorganism community and biogenic amines of Rugao ham manufactured with different potassium lactate levels(0%,0.5%,1%,2%)were investigated;the relationship between microbial community and the formation of TVBN and biogenic amines was further evaluated.With the increase of potassium lactate from 0%to 2%,the increased sensory scores and the decreased total aerobic bacterial count and TVBN were observed;the abundance of Staphylococcus increased,while the content of Halomonas decreased.LDA effect size(LEf Se)and correlations analysis showed that Staphylococcus equorum and Lactobacillus fermentum could be the key species to improve sensory scores and decrease biogenic amines and TVBN.Metabolic pathway analysis further showed that amino acids metabolism and nitrogen metabolism were mainly involved in decreasing TVBN and biogenic amines in the treatment of 2%potassium lactate.展开更多
Selective reductive amination of carbonyl compounds with high activity is very essential for the chemical and pharmaceutical industry,but scarcely successful paradigm was reported via efficient photocatalytic reaction...Selective reductive amination of carbonyl compounds with high activity is very essential for the chemical and pharmaceutical industry,but scarcely successful paradigm was reported via efficient photocatalytic reactions.Herein,the ultrasmall Ru nanoclusters(~0.9 nm)were successfully fabricated over P25 support with positive charged Ru^(δ+)species at the interface.A new route was developed to achieve the furfural(FAL)to furfurylamine(FAM)by coupling the light-driven reductive amination and hydrogen transfer of ethanol over this type catalyst.Strikingly,the photocatalytic activity and selectivity are strongly dependent on the particle size and electronic structure of Ruthenium.The Ru^(δ+)species at the interface promote the formation of active imine intermediates;moreover,the Ru nanoclusters facilitate the separation efficiency of electrons and holes as well as accelerate the further hydrogenation of imine intermediates to product primary amines.In contrast Ru particles in larger nanometer size facilitate the formation of the furfuryl alcohol and excessive hydrogenation products.In addition,the coupling byproducts can be effectively inhibited via the construction of sub-nanocluster.This study offers a new path to produce the primary amines from biomass-derived carbonyl compounds over hybrid semiconductor/metal-clusters photocatalyst via light-driven tandem catalytic process.展开更多
Polyimide(PI) is an organic polymer material with good stability and diverse sources that has attracted widespread attention in the field of photocatalysis. In this study, a series of PI photocatalysts were synthesize...Polyimide(PI) is an organic polymer material with good stability and diverse sources that has attracted widespread attention in the field of photocatalysis. In this study, a series of PI photocatalysts were synthesized by a thermal polymerization approach using pyromellitic dianhydride(PMDA) and various diamine monomers(melamine(MA), 4,4′-oxydianiline, and melem) as the precursors as well as different heating rates. The effects of the diamine precursor and heating rate on the structure, composition, morphology, and optical properties of the as-prepared PI materials were systematically investigated by various characterization techniques. The selective photo-oxidation of benzylamine was used as a model reaction to evaluate the photocatalytic activities of the resulting PI samples for the oxidation of amines to imines. The results revealed that the PI sample prepared using MA and PMDA as the precursors and a heating rate of 7 ℃/min(MA-PI-7) exhibited the best catalytic performance, with 98% benzylamine conversion and 98% selectivity for N-benzylidene benzylamine after 4 h of irradiation. Several benzylamine derivatives and heterocyclic amines also underwent the photo-oxidation reaction over the MA-PI-7 catalyst to afford the corresponding imines with good activity. In addition, MA-PI-7 exhibited good stability over four successive photocatalytic cycles.展开更多
A mesoporous UiO-66-NH_(2) aerogel is prepared via a straightforward sol-gel method without using any binders or mechanical pressures, in which the amine groups are directly introduced into the matrix by using 2-amino...A mesoporous UiO-66-NH_(2) aerogel is prepared via a straightforward sol-gel method without using any binders or mechanical pressures, in which the amine groups are directly introduced into the matrix by using 2-aminoterephthalic acid. The novel UiO-66-NH_(2) aerogel also exhibits high specific surface area and mesopore-dominated structure, implying its highly potential use in CO_(2) adsorption. For ulteriorly investigating the effect of amine loading on the CO_(2) adsorption ability, a series of UiO-66-NH_(2) aerogel with different amino content is fabricated by changing the ligand/metal molar ratio. When the molar ratio is 1.45, the CO_(2) adsorption capacity reaches the optimum value of 2.13 mmol·g^(-1) at 25 ℃ and 0.1 MPa, which is 12.2% higher than that of pure UiO-66 aerogel. Additionally, UiO-66-NH_(2)-1.45 aerogel also has noticeable CO_(2) selectivity against N_(2) and CH_(4) as well as good regeneration stability. Such results imply that it has good application prospect in the field of CO_(2) adsorption, and also contains the potential to be applied in catalysis, separation and other fields.展开更多
Amine transaminases(ATAs)catalyze the asymmetric amination of prochiral ketones or aldehydes to their corresponding chiral amines.However,the trade-off between activity and stability in enzyme engineering represents a...Amine transaminases(ATAs)catalyze the asymmetric amination of prochiral ketones or aldehydes to their corresponding chiral amines.However,the trade-off between activity and stability in enzyme engineering represents a major obstacle to the practical application of ATAs.Overcoming this trade-off is important for developing robustly engineered enzymes and a universal approach for ATAs.Herein,we modified the binding pocket of co-ATA from Aspergillus terreus(AtATA)to identify the key amino acid residues controlling the activity and stability of AtATA toward 1-acetonaphthone.We discovered a structural switch comprising four key amino acid sites(R128,V149,L182,and L187),as well as the"best"mutant(AtATAD224K/V149A/L182 F/L187F;termed M4).Compared to the parent enzyme AtATAD224K(AtATAPa),M4 increased the catalytic efficiency(k_(cat)/K_(m)^(1-acetonaphthone),where kcatis the constant of catalytic activities and is 10.1 min^(-1),K_(m)^(1-acetonaphthoneis) Michaelis-Menten constant and is 1.7 mmol·L^(-1))and half-life(t1/2)by 59-fold to 5.9 L·min^(-1)·mmol-1and by 1.6-fold to 46.9 min,respectively.Moreover,using M4 as the biocatalyst,we converted a 20 mmol·L^(-1)aliquot of 1-acetonaphthone in a 50 mL scaled-up system to the desired product,(R)-(+)-1(1-naphthyl)ethylamine((R)-NEA),with 78%yield and high enantiomeric purity(R>99.5%)within 10 h.M4 also displayed significantly enhanced activity toward various 1-acetonaphthone analogs.The related structural properties derived by analyzing structure and sequence information of robust ATAs illustrated their enhanced activity and thermostability.Strengthening of intramolecular interactions and expansion of the angle between the substratebinding pocket and the pyridoxal 5’-phosphate(PLP)-binding pocket contributed to synchronous enhancement of ATA thermostability and activity.Moreover,this pocket engineering strategy successfully transferred enhanced activity and thermostability to three other ATAs,which exhibited 8%-22%sequence similarity with AtATA.This research has important implications for overcoming the trade-off between ATA activity and thermostability.展开更多
Numerous small-molecule amines(SMAs)play critical roles in maintaining bone homeostasis and promoting bone regeneration regardless of whether they are applied as drugs or biomaterials.On the one hand,SMAs promote bone...Numerous small-molecule amines(SMAs)play critical roles in maintaining bone homeostasis and promoting bone regeneration regardless of whether they are applied as drugs or biomaterials.On the one hand,SMAs promote bone formation or inhibit bone resorption through the regulation of key molecular signaling pathways in osteoblasts/osteoclasts;on the other hand,owing to their alkaline properties as well as their antioxidant and anti-inflammatory features,most SMAs create a favorable microenvironment for bone homeostasis.However,due to a lack of information on their structure/bioactivity and underlying mechanisms of action,certain SMAs cannot be developed into drugs or biomaterials for bone disease treatment.In this review,we thoroughly summarize the current understanding of SMA effects on bone homeostasis,including descriptions of their classifications,biochemical features,recent research advances in bone biology and related regulatory mechanisms in bone regeneration.In addition,we discuss the challenges and prospects of SMA translational research.展开更多
Trace amines(TAs)are metabolically related to catecholamine and associated with cancer and neurological disorders.Comprehensive measurement of TAs is essential for understanding pathological processes and providing pr...Trace amines(TAs)are metabolically related to catecholamine and associated with cancer and neurological disorders.Comprehensive measurement of TAs is essential for understanding pathological processes and providing proper drug intervention.However,the trace amounts and chemical instability of TAs challenge quantification.Here,diisopropyl phosphite coupled with chip two-dimensional(2D)liquid chromatography tandem triple-quadrupole mass spectrometry(LC-QQQ/MS)was developed to simultaneously determine TAs and associated metabolites.The results showed that the sensitivities of TAs increased up to 5520 times compared with those using nonderivatized LC-QQQ/MS.This sensitive method was utilized to investigate their alterations in hepatoma cells after treatment with sorafenib.The significantly altered TAs and associated metabolites suggested that phenylalanine and tyrosine metabolic pathways were related to sorafenib treatment in Hep3B cells.This sensitive method has great potential to elucidate the mechanism and diagnose diseases considering that an increasing number of physiological functions of TAs have been discovered in recent decades.展开更多
Synthesizing nitrogen(N)-containing molecules from biomass derivatives is a new strategy for production of this kind of chemicals.Herein,for the first time we present the synthesis of N-substituted aryl pyrroles via r...Synthesizing nitrogen(N)-containing molecules from biomass derivatives is a new strategy for production of this kind of chemicals.Herein,for the first time we present the synthesis of N-substituted aryl pyrroles via reductive amination/cyclization of levulinic acid(LA)with primary aromatic amines and hydrosilanes(e.g.,PMHS)over Cs F,and a series of N-substituted aryl pyrroles could be obtained in good to excellent yields at 120○C.The mechanism investigation indicates that the reaction proceeds in two steps:the cyclization between amine and LA occurs first to form intermediate 5-methyl-N-alkyl-1,3-dihydro-2H-pyrrolones and their isomeride(B),and then the chemo-and region-selective reduction of intermediates take place to produce the final products.This approach for synthesis of N-substituted aryl pyrroles can be performed under mild and green conditions,which may have promising applications.展开更多
Since the utilization of abundant biomass to develop advanced materials has become an utmost priority in recent years,we developed two sustainable routes(i.e.,the impregnation method and the one-pot synthesis)to prepa...Since the utilization of abundant biomass to develop advanced materials has become an utmost priority in recent years,we developed two sustainable routes(i.e.,the impregnation method and the one-pot synthesis)to prepare the hydrochar-supported catalysts and tested its catalytic performance on the reductive amination.Several techniques,such as TEM,XRD and XPS,were adopted to characterize the structural and catalytic features of samples.Results indicated that the impregnation method favors the formation of outer-sphere surface complexes with porous structure as well as well-distributed metallic nanoparticles,while the one-pot synthesis tends to form the inner-sphere surface complexes with relatively smooth appearance and amorphous metals.This difference explains the better activity of catalysts prepared by the impregnation method which can selectively convert benzaldehyde to benzylamine with an excellent yield of 93.7%under the optimal reaction conditions;in contrast,the catalyst prepared by the one-pot synthesis only exhibits a low selectivity near to zero.Furthermore,the gram-scale test catalyzed by the same catalysts exhibits a similar yield of benzylamine in comparison to its smaller scale,which is comparable to the previously reported heterogeneous noble-based catalysts.More surprisingly,the prepared catalysts can be expediently recycled by a magnetic bar and remain the satisfying catalytic activity after reusing up to five times.In conclusion,these developed catalysts enable the synthesis of functional amines with excellent selectivity and carbon balance,proving cost-effective and sustainable access to the wide application of reductive amination.展开更多
Meat products are an important part in our daily diet,providing valuable nutrients for the human body.However,heating processes cause the meat to become more appetizing with changes in texture,appearance,flavor,and ch...Meat products are an important part in our daily diet,providing valuable nutrients for the human body.However,heating processes cause the meat to become more appetizing with changes in texture,appearance,flavor,and chemical properties by the altering of protein structure and other ingredients.As one kind of cooking-induced contaminants,heterocyclic aromatic amines(HAAs)are widely present in protein aceous food products with strong carcinogenic and mutagenic properties.In order to promote the safety of traditional meat products,this review focused on the formation,metabolism,biological monitoring and inhibitory mechanism of HAA.An overview of the formation pathways,hazards,and control methods of HAAs during food processing in recent years was studied,aiming to provide some valuable information for exploring effective methods to inhibit the production of associated hazards during food processing.Systematic selection of different types of flavonoids to explore their effects on the formation of HAAs in an actual barbecue system can provide theoretical reference for effectively controlling the formation of HAAs and reducing their harm to human health.展开更多
The purpose of this research study was to investigate the properties of polyurethane coatings based on lignin nano-particles.For this purpose,the prepared coatings were applied to pine wood surfaces and weathered arti...The purpose of this research study was to investigate the properties of polyurethane coatings based on lignin nano-particles.For this purpose,the prepared coatings were applied to pine wood surfaces and weathered artificially.Subsequently,color and gloss of the coatings were measured before and after the weathering test.Field emission scanning electron microscopy(FE-SEM)micrographs prepared from the coatings showed that the average size of nano-particles in the polyurethane substrate was approximately 500 nm.Nuclear magnetic resonance(13C-NMR)spectroscopy showed that strong urethane bonds were formed in the nano-lignin-based polyurethane.Differential calorimetric analysis(DSC)test revealed that the glass-transition temperature(Tg)of lignin nanoparticles modified with diethylenetriamine(DETA)was 112.8℃ and Tg of lignin nano-particles modified with ethylenediamine(EDA)was 102.5℃,which is lower than the Tg of un-modified lignin(114.6℃)and lignin modified with DETA(126.8℃)and lignin modified with EDA(131.3℃).The coatings modified with lignin nano-particles had a greater change in gloss.The lignin nano-particles in the modified coating are trapping hydroxyl radicals which reduces photoactivity and yellowing of the polyurethane by about 3 times compared to unmodified polyurethane coatings.After weathering test,the nano-lignin-based coating had a rougher surface with a lower contact angle(0.78°)compared to the unmodified polyurethane coating(0.85°).展开更多
This study was carried out to investigate the biogenic amines(BAs), physicochemical property and microorganisms in dry salted fish, a traditional aquatic food consumed in China. Forty three samples of dry salted fish ...This study was carried out to investigate the biogenic amines(BAs), physicochemical property and microorganisms in dry salted fish, a traditional aquatic food consumed in China. Forty three samples of dry salted fish were gathered from retail and wholesale markets and manufacturers, which had been produced in various regions in China. Cadaverine(CAD) and putrescine(PUT) were quantitatively the most common biogenic amines. About 14% of the samples exceeded the histamine content standards established by the FDA and/or EU. The highest histamine content was found in Silver pomfret(Pampus argenteus)(347.79 mg kg^(-1)). Five of forty three samples exceeded the acceptable content of TYR(100 mg kg^(-1)), and 23.26% of dried-salted fish contained high contents of biogenic amines(above 600 mg kg^(-1)). In addition, species, regions, pickling processes and drying methods made the physicochemical property, microorganisms and biogenic amines in dry salted fish to be different to some extents. The total plate count(TPC) was much higher than that of total halophilic bacteria in all samples. The biogenic amines, physicochemical property and microbiological counts exhibited large variations among samples. Furthermore, no significant correlation between biogenic amines and physicochemical property and TPC was observed. This study indicated that dry salted fish may still present healthy risk for BAs, depending on the processing methods, storage conditions among others.展开更多
Post-combustion CO_2 capture(PCC) process faces significant challenge of high regeneration energy consumption.Biphasic absorbent is a promising alternative candidate which could significantly reduce the regeneration e...Post-combustion CO_2 capture(PCC) process faces significant challenge of high regeneration energy consumption.Biphasic absorbent is a promising alternative candidate which could significantly reduce the regeneration energy consumption because only the CO_2-concentrated phase should be regenerated. In this work, aqueous solutions of triethylenetetramine(TETA) and N,N-diethylethanolamine(DEEA) are found to be efficient biphasic absorbents of CO_2. The effects of the solvent composition, total amine concentration, and temperature on the absorption behavior, as well as the effect of temperature on the desorption behavior of TETA–DEEA–H2 O system were investigated. An aqueous solution of 1 mol·L-1 TETA and 4 mol·L-1 DEEA spontaneously separates into two liquid phases after a certain amount of CO_2 is absorbed and it shows high CO_2 absorption/desorption performance.About 99.4% of the absorbed CO_2 is found in the lower phase, which corresponds to a CO_2 absorption capacity of 3.44 mol·kg-1. The appropriate absorption and desorption temperatures are found to be 30 °C and 90 °C,respectively. The thermal analysis indicates that the heat of absorption of the 1 mol·L-1 TETA and 4 mol·L-1 DEEA solution is-84.38 kJ·(mol CO_2)-1 which is 6.92 kJ·(mol CO_2)-1 less than that of aqueous MEA. The reaction heat, sensible heat, and the vaporization heat of the TETA–DEEA–H2 O system are lower than that of the aqueous MEA, while its CO_2 capacity is higher. Thus the TETA–DEEA–H2 O system is potentially a better absorbent for the post-combustion CO_2 capture process.展开更多
Carbon dioxide(CO2)is one of the commonly emitted gaseous by-products in industrial processes.While CO2 gas is the main cause to greenhouse effect,various CO2 capture technologies have been proposed and implemented to...Carbon dioxide(CO2)is one of the commonly emitted gaseous by-products in industrial processes.While CO2 gas is the main cause to greenhouse effect,various CO2 capture technologies have been proposed and implemented to sequester the CO2 before the waste gases being released into the atmosphere.One of the mature technologies for CO2 absorption is by using amine-based solvents.In this regard,different single amine solvents or blended amine solvents have been proven for their capability to remove CO2.However,the dissolution and reaction of CO2 gas with the amine solvents turn the solution corrosive.Such phenomenon is undesired as it posts corrosion problem to the absorption column,which normally built of carbon steel material.Henceforth,understanding the behaviour of different amine-based solvents in absorbing CO2 and its subsequent impact on carbon steel corrosion is very significant.In this review article,we will outline some of the more commonly used solvents and their respective advantages and disadvantages,motivating further investigation into the corrosion tendency.Meanwhile,existing gaps in this research area are discussed for future investigation.展开更多
Amine-silica composite materials for post-combustion CO_2 capture have attracted considerable attention because of their high CO_2 uptake at low CO_2 concentrations, excellent CO_2 capture selectivity in the presence ...Amine-silica composite materials for post-combustion CO_2 capture have attracted considerable attention because of their high CO_2 uptake at low CO_2 concentrations, excellent CO_2 capture selectivity in the presence of moisture, and lower energy requirements for sorbent regeneration. This review discusses the recent advances in amine-silica composites for CO_2 capture, including adsorbent preparation and characterization, CO_2 capture under dry and moisture conditions at different CO_2 partial pressures, sorbent regeneration, and stability after many cyclic sorption-desorption runs.展开更多
Industrial grade multi-walled carbon nanotubes(IG-MWCNTs) are a low-cost substitute for commercially purified multi-walled carbon nanotubes(P-MWCNTs). In this work, IG-MWCNTs were functionalized with tetraethylenepent...Industrial grade multi-walled carbon nanotubes(IG-MWCNTs) are a low-cost substitute for commercially purified multi-walled carbon nanotubes(P-MWCNTs). In this work, IG-MWCNTs were functionalized with tetraethylenepentamine(TEPA) for CO2capture. The TEPA impregnated IG-MWCNTs were characterized with various experimental methods including N2adsorption/desorption isotherms, elemental analysis, X-ray diffraction, Fourier transform infrared spectroscopy and thermogravimetric analysis. Both the adsorption isotherms of IGMWCNTs-n and the isosteric heats of different adsorption capacities were obtained from experiments. TEPA impregnated IG-MWCNTs were also shown to have high CO2adsorption capacity comparable to that of TEPA impregnated P-MWCNTs. The adsorption capacity of IG-MWCNTs based adsorbents was in the range of 2.145 to 3.088 mmol/g, depending on adsorption temperatures. Having the advantages of low-cost and high adsorption capacity, TEPA impregnated IG-MWCNTs seem to be a promising adsorbent for CO2capture from flue gas.展开更多
Under the Paris agreement, China has committed to reducing CO_2 emissions by 60%–65% per unit of GDP by 2030.Since CO_2 emissions from coal-fired power plants currently account for over 30% of the total carbon emissi...Under the Paris agreement, China has committed to reducing CO_2 emissions by 60%–65% per unit of GDP by 2030.Since CO_2 emissions from coal-fired power plants currently account for over 30% of the total carbon emissions in China, it will be necessary to mitigate at least some of these emissions to achieve this goal. Studies by the International Energy Agency(IEA) indicate CCS technology has the potential to contribute 14% of global emission reductions, followed by 40% of higher energy efficiency and 35% of renewable energy, which is considered as the most promising technology to significantly reduce carbon emissions for current coal-fired power plants.Moreover, the announcement of a Chinese national carbon trading market in late 2017 signals an opportunity for the commercial deployment of CO_2 capture technologies.Currently, the only commercially demonstrated technology for post-combustion CO_2 capture technology from power plants is solvent-based absorption. While commercially viable, the costs of deploying this technology are high. This has motivated efforts to develop more affordable alternatives, including advanced solvents, membranes,and sorbent capture systems. Of these approaches, advanced solvents have received the most attention in terms of research and demonstration. In contrast, sorbent capture technology has less attention, despite its potential for much lower energy consumption due to the absence of water in the sorbent. This paper reviews recent progress in the development of sorbent materials modified by amine functionalities with an emphasis on material characterization methods and the effects of operating conditions on performance. The main problems and challenges that need to be overcome to improve the competitiveness of sorbent-based capture technologies are discussed.展开更多
Global warming and associated global climate change have led to serious efforts towards reducing CO_(2)emissions through the CO_(2)capture from the major emission sources.CO_(2)capture using the amine functionalized a...Global warming and associated global climate change have led to serious efforts towards reducing CO_(2)emissions through the CO_(2)capture from the major emission sources.CO_(2)capture using the amine functionalized adsorbents is regard as a direct and effective way to reducing CO_(2)emissions due to their large CO_(2)adsorption amount,excellent CO_(2)adsorption selectivity and lower energy requirements for adsorbent regeneration.Moreover,large number of achievements on the amine functionalized solid adsorbent have been recorded for the enhanced CO_(2)capture in the past few years.In view of this,we review and analyze the recent advances in amine functionalized solid adsorbents prepared with different supporting materials including mesoporous silica,zeolite,porous carbon materials,metal organic frameworks(MOF)and other composite porous materials.In addition,amine functionalized solid adsorbents derived from waste resources are also reviewed because of the large number demand for cost-effective carbon dioxide adsorbents and the processing needs of waste resources.Considering the importance of the stability of the adsorbent in practical applications,advanced research in the capture cycle stability has also been summarized and analyzed.Finally,we summarize the review and offer the recommendations for the development of amine-based solid adsorbents for carbon dioxide capture.展开更多
基金supported by National Natural Science Foundation of China(32022066,32101975)Zhejiang Province Natural Science Foundation(LQ22C200017)+1 种基金China Postdoctoral Foundation(2020M681806,2021T140348)Science and Technology Programs of Ningbo(202003N4130,202002N3067)。
文摘To deepen the understanding in the effect of potassium lactate on the sensory quality and safety of Rugao ham,sensory attributes,physicochemical parameters,total volatile basic nitrogen(TVBN),microorganism community and biogenic amines of Rugao ham manufactured with different potassium lactate levels(0%,0.5%,1%,2%)were investigated;the relationship between microbial community and the formation of TVBN and biogenic amines was further evaluated.With the increase of potassium lactate from 0%to 2%,the increased sensory scores and the decreased total aerobic bacterial count and TVBN were observed;the abundance of Staphylococcus increased,while the content of Halomonas decreased.LDA effect size(LEf Se)and correlations analysis showed that Staphylococcus equorum and Lactobacillus fermentum could be the key species to improve sensory scores and decrease biogenic amines and TVBN.Metabolic pathway analysis further showed that amino acids metabolism and nitrogen metabolism were mainly involved in decreasing TVBN and biogenic amines in the treatment of 2%potassium lactate.
基金financially supported by the National Natural Science Foundation of China(202102007,21978147 and 21935001)the Fundamental Research Funds for the Central Universities(buctrc202112)。
文摘Selective reductive amination of carbonyl compounds with high activity is very essential for the chemical and pharmaceutical industry,but scarcely successful paradigm was reported via efficient photocatalytic reactions.Herein,the ultrasmall Ru nanoclusters(~0.9 nm)were successfully fabricated over P25 support with positive charged Ru^(δ+)species at the interface.A new route was developed to achieve the furfural(FAL)to furfurylamine(FAM)by coupling the light-driven reductive amination and hydrogen transfer of ethanol over this type catalyst.Strikingly,the photocatalytic activity and selectivity are strongly dependent on the particle size and electronic structure of Ruthenium.The Ru^(δ+)species at the interface promote the formation of active imine intermediates;moreover,the Ru nanoclusters facilitate the separation efficiency of electrons and holes as well as accelerate the further hydrogenation of imine intermediates to product primary amines.In contrast Ru particles in larger nanometer size facilitate the formation of the furfuryl alcohol and excessive hydrogenation products.In addition,the coupling byproducts can be effectively inhibited via the construction of sub-nanocluster.This study offers a new path to produce the primary amines from biomass-derived carbonyl compounds over hybrid semiconductor/metal-clusters photocatalyst via light-driven tandem catalytic process.
基金the Opening Project of Key Laboratory of Green Catalysis of Higher Education Institutes of Sichuan(Grant number:LZJ2101)the Fundamental Research Funds of China West Normal University(Grant number:19D038).
文摘Polyimide(PI) is an organic polymer material with good stability and diverse sources that has attracted widespread attention in the field of photocatalysis. In this study, a series of PI photocatalysts were synthesized by a thermal polymerization approach using pyromellitic dianhydride(PMDA) and various diamine monomers(melamine(MA), 4,4′-oxydianiline, and melem) as the precursors as well as different heating rates. The effects of the diamine precursor and heating rate on the structure, composition, morphology, and optical properties of the as-prepared PI materials were systematically investigated by various characterization techniques. The selective photo-oxidation of benzylamine was used as a model reaction to evaluate the photocatalytic activities of the resulting PI samples for the oxidation of amines to imines. The results revealed that the PI sample prepared using MA and PMDA as the precursors and a heating rate of 7 ℃/min(MA-PI-7) exhibited the best catalytic performance, with 98% benzylamine conversion and 98% selectivity for N-benzylidene benzylamine after 4 h of irradiation. Several benzylamine derivatives and heterocyclic amines also underwent the photo-oxidation reaction over the MA-PI-7 catalyst to afford the corresponding imines with good activity. In addition, MA-PI-7 exhibited good stability over four successive photocatalytic cycles.
基金supported by the National Natural Science Foundation of China (21603125)Science-Education-Industry Integration Innovation Pilot Project of Qilu University of Technology (2020KJC-GH13)+2 种基金International Cooperation Project of Shandong Academy of Sciences (2019GHPY09)Natural Science Foundation of Shandong Province (ZR2019BEM025)Young doctor Cooperation Foundation of Qilu University of Technology (Shandong Academy of Sciences) (2019BSHZ0016)。
文摘A mesoporous UiO-66-NH_(2) aerogel is prepared via a straightforward sol-gel method without using any binders or mechanical pressures, in which the amine groups are directly introduced into the matrix by using 2-aminoterephthalic acid. The novel UiO-66-NH_(2) aerogel also exhibits high specific surface area and mesopore-dominated structure, implying its highly potential use in CO_(2) adsorption. For ulteriorly investigating the effect of amine loading on the CO_(2) adsorption ability, a series of UiO-66-NH_(2) aerogel with different amino content is fabricated by changing the ligand/metal molar ratio. When the molar ratio is 1.45, the CO_(2) adsorption capacity reaches the optimum value of 2.13 mmol·g^(-1) at 25 ℃ and 0.1 MPa, which is 12.2% higher than that of pure UiO-66 aerogel. Additionally, UiO-66-NH_(2)-1.45 aerogel also has noticeable CO_(2) selectivity against N_(2) and CH_(4) as well as good regeneration stability. Such results imply that it has good application prospect in the field of CO_(2) adsorption, and also contains the potential to be applied in catalysis, separation and other fields.
基金National Natural Science Foundation of China(32071268 and 31971372)the Ningbo"Scientific and Technological Innovation 2025"Key Project(2020Z080)for financial support。
文摘Amine transaminases(ATAs)catalyze the asymmetric amination of prochiral ketones or aldehydes to their corresponding chiral amines.However,the trade-off between activity and stability in enzyme engineering represents a major obstacle to the practical application of ATAs.Overcoming this trade-off is important for developing robustly engineered enzymes and a universal approach for ATAs.Herein,we modified the binding pocket of co-ATA from Aspergillus terreus(AtATA)to identify the key amino acid residues controlling the activity and stability of AtATA toward 1-acetonaphthone.We discovered a structural switch comprising four key amino acid sites(R128,V149,L182,and L187),as well as the"best"mutant(AtATAD224K/V149A/L182 F/L187F;termed M4).Compared to the parent enzyme AtATAD224K(AtATAPa),M4 increased the catalytic efficiency(k_(cat)/K_(m)^(1-acetonaphthone),where kcatis the constant of catalytic activities and is 10.1 min^(-1),K_(m)^(1-acetonaphthoneis) Michaelis-Menten constant and is 1.7 mmol·L^(-1))and half-life(t1/2)by 59-fold to 5.9 L·min^(-1)·mmol-1and by 1.6-fold to 46.9 min,respectively.Moreover,using M4 as the biocatalyst,we converted a 20 mmol·L^(-1)aliquot of 1-acetonaphthone in a 50 mL scaled-up system to the desired product,(R)-(+)-1(1-naphthyl)ethylamine((R)-NEA),with 78%yield and high enantiomeric purity(R>99.5%)within 10 h.M4 also displayed significantly enhanced activity toward various 1-acetonaphthone analogs.The related structural properties derived by analyzing structure and sequence information of robust ATAs illustrated their enhanced activity and thermostability.Strengthening of intramolecular interactions and expansion of the angle between the substratebinding pocket and the pyridoxal 5’-phosphate(PLP)-binding pocket contributed to synchronous enhancement of ATA thermostability and activity.Moreover,this pocket engineering strategy successfully transferred enhanced activity and thermostability to three other ATAs,which exhibited 8%-22%sequence similarity with AtATA.This research has important implications for overcoming the trade-off between ATA activity and thermostability.
基金the support for this work from the National Natural Science Foundation of China [Grant Nos.32122046,32000959,82030067,and 82161160342]the National Key R&D Program [Grant No.2018YFA0703100]+3 种基金the Youth Innovation Promotion Association of CAS [Grant No.2019350]the Guangdong Natural Science Foundation [Grant No.2020A1515111190]the Shenzhen Fundamental Research Foundation [Grant Nos.JCYJ20190812162809131,JCYJ20200109114006014,JCYJ20210324113001005,JCYJ20210324115814040,and JSGGKQTD20210831174330015]the Shenzhen Fund for Guangdong Provincial High-level Clinical Key Specialties [Grant No.SZGSP001]。
文摘Numerous small-molecule amines(SMAs)play critical roles in maintaining bone homeostasis and promoting bone regeneration regardless of whether they are applied as drugs or biomaterials.On the one hand,SMAs promote bone formation or inhibit bone resorption through the regulation of key molecular signaling pathways in osteoblasts/osteoclasts;on the other hand,owing to their alkaline properties as well as their antioxidant and anti-inflammatory features,most SMAs create a favorable microenvironment for bone homeostasis.However,due to a lack of information on their structure/bioactivity and underlying mechanisms of action,certain SMAs cannot be developed into drugs or biomaterials for bone disease treatment.In this review,we thoroughly summarize the current understanding of SMA effects on bone homeostasis,including descriptions of their classifications,biochemical features,recent research advances in bone biology and related regulatory mechanisms in bone regeneration.In addition,we discuss the challenges and prospects of SMA translational research.
基金supported by the Science and Technology Development Fund,Macao,China(Grant No.:FDCT0044/2018/AFJ).
文摘Trace amines(TAs)are metabolically related to catecholamine and associated with cancer and neurological disorders.Comprehensive measurement of TAs is essential for understanding pathological processes and providing proper drug intervention.However,the trace amounts and chemical instability of TAs challenge quantification.Here,diisopropyl phosphite coupled with chip two-dimensional(2D)liquid chromatography tandem triple-quadrupole mass spectrometry(LC-QQQ/MS)was developed to simultaneously determine TAs and associated metabolites.The results showed that the sensitivities of TAs increased up to 5520 times compared with those using nonderivatized LC-QQQ/MS.This sensitive method was utilized to investigate their alterations in hepatoma cells after treatment with sorafenib.The significantly altered TAs and associated metabolites suggested that phenylalanine and tyrosine metabolic pathways were related to sorafenib treatment in Hep3B cells.This sensitive method has great potential to elucidate the mechanism and diagnose diseases considering that an increasing number of physiological functions of TAs have been discovered in recent decades.
基金supported by Chinese Academy of Sciences,China(Grant No.QYZDY-SSW-SLH013-2)Henan Normal University,China。
文摘Synthesizing nitrogen(N)-containing molecules from biomass derivatives is a new strategy for production of this kind of chemicals.Herein,for the first time we present the synthesis of N-substituted aryl pyrroles via reductive amination/cyclization of levulinic acid(LA)with primary aromatic amines and hydrosilanes(e.g.,PMHS)over Cs F,and a series of N-substituted aryl pyrroles could be obtained in good to excellent yields at 120○C.The mechanism investigation indicates that the reaction proceeds in two steps:the cyclization between amine and LA occurs first to form intermediate 5-methyl-N-alkyl-1,3-dihydro-2H-pyrrolones and their isomeride(B),and then the chemo-and region-selective reduction of intermediates take place to produce the final products.This approach for synthesis of N-substituted aryl pyrroles can be performed under mild and green conditions,which may have promising applications.
基金This work was supported financially by the National Key R&D Program of China(2018YFB1501500)National Natural Science Foundation of China(51976225).
文摘Since the utilization of abundant biomass to develop advanced materials has become an utmost priority in recent years,we developed two sustainable routes(i.e.,the impregnation method and the one-pot synthesis)to prepare the hydrochar-supported catalysts and tested its catalytic performance on the reductive amination.Several techniques,such as TEM,XRD and XPS,were adopted to characterize the structural and catalytic features of samples.Results indicated that the impregnation method favors the formation of outer-sphere surface complexes with porous structure as well as well-distributed metallic nanoparticles,while the one-pot synthesis tends to form the inner-sphere surface complexes with relatively smooth appearance and amorphous metals.This difference explains the better activity of catalysts prepared by the impregnation method which can selectively convert benzaldehyde to benzylamine with an excellent yield of 93.7%under the optimal reaction conditions;in contrast,the catalyst prepared by the one-pot synthesis only exhibits a low selectivity near to zero.Furthermore,the gram-scale test catalyzed by the same catalysts exhibits a similar yield of benzylamine in comparison to its smaller scale,which is comparable to the previously reported heterogeneous noble-based catalysts.More surprisingly,the prepared catalysts can be expediently recycled by a magnetic bar and remain the satisfying catalytic activity after reusing up to five times.In conclusion,these developed catalysts enable the synthesis of functional amines with excellent selectivity and carbon balance,proving cost-effective and sustainable access to the wide application of reductive amination.
基金supported by National Postdoctoral Program(2020M682073)the National Natural Science Foundation of China(NSFC,32061160477)+1 种基金The National Natural Science Foundation of China(32272315,32072209)the Natural Science Foundation of Guangdong Province(2022A1515010694).
文摘Meat products are an important part in our daily diet,providing valuable nutrients for the human body.However,heating processes cause the meat to become more appetizing with changes in texture,appearance,flavor,and chemical properties by the altering of protein structure and other ingredients.As one kind of cooking-induced contaminants,heterocyclic aromatic amines(HAAs)are widely present in protein aceous food products with strong carcinogenic and mutagenic properties.In order to promote the safety of traditional meat products,this review focused on the formation,metabolism,biological monitoring and inhibitory mechanism of HAA.An overview of the formation pathways,hazards,and control methods of HAAs during food processing in recent years was studied,aiming to provide some valuable information for exploring effective methods to inhibit the production of associated hazards during food processing.Systematic selection of different types of flavonoids to explore their effects on the formation of HAAs in an actual barbecue system can provide theoretical reference for effectively controlling the formation of HAAs and reducing their harm to human health.
文摘The purpose of this research study was to investigate the properties of polyurethane coatings based on lignin nano-particles.For this purpose,the prepared coatings were applied to pine wood surfaces and weathered artificially.Subsequently,color and gloss of the coatings were measured before and after the weathering test.Field emission scanning electron microscopy(FE-SEM)micrographs prepared from the coatings showed that the average size of nano-particles in the polyurethane substrate was approximately 500 nm.Nuclear magnetic resonance(13C-NMR)spectroscopy showed that strong urethane bonds were formed in the nano-lignin-based polyurethane.Differential calorimetric analysis(DSC)test revealed that the glass-transition temperature(Tg)of lignin nanoparticles modified with diethylenetriamine(DETA)was 112.8℃ and Tg of lignin nano-particles modified with ethylenediamine(EDA)was 102.5℃,which is lower than the Tg of un-modified lignin(114.6℃)and lignin modified with DETA(126.8℃)and lignin modified with EDA(131.3℃).The coatings modified with lignin nano-particles had a greater change in gloss.The lignin nano-particles in the modified coating are trapping hydroxyl radicals which reduces photoactivity and yellowing of the polyurethane by about 3 times compared to unmodified polyurethane coatings.After weathering test,the nano-lignin-based coating had a rougher surface with a lower contact angle(0.78°)compared to the unmodified polyurethane coating(0.85°).
基金financially supported by the National Natural Science Foundation of China (No.31371800)the National Science-Technology Support Plan Project (2012BAD28B05)
文摘This study was carried out to investigate the biogenic amines(BAs), physicochemical property and microorganisms in dry salted fish, a traditional aquatic food consumed in China. Forty three samples of dry salted fish were gathered from retail and wholesale markets and manufacturers, which had been produced in various regions in China. Cadaverine(CAD) and putrescine(PUT) were quantitatively the most common biogenic amines. About 14% of the samples exceeded the histamine content standards established by the FDA and/or EU. The highest histamine content was found in Silver pomfret(Pampus argenteus)(347.79 mg kg^(-1)). Five of forty three samples exceeded the acceptable content of TYR(100 mg kg^(-1)), and 23.26% of dried-salted fish contained high contents of biogenic amines(above 600 mg kg^(-1)). In addition, species, regions, pickling processes and drying methods made the physicochemical property, microorganisms and biogenic amines in dry salted fish to be different to some extents. The total plate count(TPC) was much higher than that of total halophilic bacteria in all samples. The biogenic amines, physicochemical property and microbiological counts exhibited large variations among samples. Furthermore, no significant correlation between biogenic amines and physicochemical property and TPC was observed. This study indicated that dry salted fish may still present healthy risk for BAs, depending on the processing methods, storage conditions among others.
基金Supported by the National Natural Science Foundation of China(21606154)
文摘Post-combustion CO_2 capture(PCC) process faces significant challenge of high regeneration energy consumption.Biphasic absorbent is a promising alternative candidate which could significantly reduce the regeneration energy consumption because only the CO_2-concentrated phase should be regenerated. In this work, aqueous solutions of triethylenetetramine(TETA) and N,N-diethylethanolamine(DEEA) are found to be efficient biphasic absorbents of CO_2. The effects of the solvent composition, total amine concentration, and temperature on the absorption behavior, as well as the effect of temperature on the desorption behavior of TETA–DEEA–H2 O system were investigated. An aqueous solution of 1 mol·L-1 TETA and 4 mol·L-1 DEEA spontaneously separates into two liquid phases after a certain amount of CO_2 is absorbed and it shows high CO_2 absorption/desorption performance.About 99.4% of the absorbed CO_2 is found in the lower phase, which corresponds to a CO_2 absorption capacity of 3.44 mol·kg-1. The appropriate absorption and desorption temperatures are found to be 30 °C and 90 °C,respectively. The thermal analysis indicates that the heat of absorption of the 1 mol·L-1 TETA and 4 mol·L-1 DEEA solution is-84.38 kJ·(mol CO_2)-1 which is 6.92 kJ·(mol CO_2)-1 less than that of aqueous MEA. The reaction heat, sensible heat, and the vaporization heat of the TETA–DEEA–H2 O system are lower than that of the aqueous MEA, while its CO_2 capacity is higher. Thus the TETA–DEEA–H2 O system is potentially a better absorbent for the post-combustion CO_2 capture process.
基金the financial support from UCSI University through Pioneer Scientist Incentive Fund(PSIF)with project code Proj-In-FETBE-041。
文摘Carbon dioxide(CO2)is one of the commonly emitted gaseous by-products in industrial processes.While CO2 gas is the main cause to greenhouse effect,various CO2 capture technologies have been proposed and implemented to sequester the CO2 before the waste gases being released into the atmosphere.One of the mature technologies for CO2 absorption is by using amine-based solvents.In this regard,different single amine solvents or blended amine solvents have been proven for their capability to remove CO2.However,the dissolution and reaction of CO2 gas with the amine solvents turn the solution corrosive.Such phenomenon is undesired as it posts corrosion problem to the absorption column,which normally built of carbon steel material.Henceforth,understanding the behaviour of different amine-based solvents in absorbing CO2 and its subsequent impact on carbon steel corrosion is very significant.In this review article,we will outline some of the more commonly used solvents and their respective advantages and disadvantages,motivating further investigation into the corrosion tendency.Meanwhile,existing gaps in this research area are discussed for future investigation.
基金supported financially by the National Natural Science Foundation of China (No. 21607121)by the National Research Foundation of Korea (NRF) (Grant number: NRF2015R1A4A1042434)
文摘Amine-silica composite materials for post-combustion CO_2 capture have attracted considerable attention because of their high CO_2 uptake at low CO_2 concentrations, excellent CO_2 capture selectivity in the presence of moisture, and lower energy requirements for sorbent regeneration. This review discusses the recent advances in amine-silica composites for CO_2 capture, including adsorbent preparation and characterization, CO_2 capture under dry and moisture conditions at different CO_2 partial pressures, sorbent regeneration, and stability after many cyclic sorption-desorption runs.
基金supported by Zhejiang Provincial Natural Science Foundation of China(Grant No.LZ12E08002)
文摘Industrial grade multi-walled carbon nanotubes(IG-MWCNTs) are a low-cost substitute for commercially purified multi-walled carbon nanotubes(P-MWCNTs). In this work, IG-MWCNTs were functionalized with tetraethylenepentamine(TEPA) for CO2capture. The TEPA impregnated IG-MWCNTs were characterized with various experimental methods including N2adsorption/desorption isotherms, elemental analysis, X-ray diffraction, Fourier transform infrared spectroscopy and thermogravimetric analysis. Both the adsorption isotherms of IGMWCNTs-n and the isosteric heats of different adsorption capacities were obtained from experiments. TEPA impregnated IG-MWCNTs were also shown to have high CO2adsorption capacity comparable to that of TEPA impregnated P-MWCNTs. The adsorption capacity of IG-MWCNTs based adsorbents was in the range of 2.145 to 3.088 mmol/g, depending on adsorption temperatures. Having the advantages of low-cost and high adsorption capacity, TEPA impregnated IG-MWCNTs seem to be a promising adsorbent for CO2capture from flue gas.
基金Supported by the National Key Research and Development Program of China(2017YFB0603301)
文摘Under the Paris agreement, China has committed to reducing CO_2 emissions by 60%–65% per unit of GDP by 2030.Since CO_2 emissions from coal-fired power plants currently account for over 30% of the total carbon emissions in China, it will be necessary to mitigate at least some of these emissions to achieve this goal. Studies by the International Energy Agency(IEA) indicate CCS technology has the potential to contribute 14% of global emission reductions, followed by 40% of higher energy efficiency and 35% of renewable energy, which is considered as the most promising technology to significantly reduce carbon emissions for current coal-fired power plants.Moreover, the announcement of a Chinese national carbon trading market in late 2017 signals an opportunity for the commercial deployment of CO_2 capture technologies.Currently, the only commercially demonstrated technology for post-combustion CO_2 capture technology from power plants is solvent-based absorption. While commercially viable, the costs of deploying this technology are high. This has motivated efforts to develop more affordable alternatives, including advanced solvents, membranes,and sorbent capture systems. Of these approaches, advanced solvents have received the most attention in terms of research and demonstration. In contrast, sorbent capture technology has less attention, despite its potential for much lower energy consumption due to the absence of water in the sorbent. This paper reviews recent progress in the development of sorbent materials modified by amine functionalities with an emphasis on material characterization methods and the effects of operating conditions on performance. The main problems and challenges that need to be overcome to improve the competitiveness of sorbent-based capture technologies are discussed.
基金supported by the National Natural Science Foundation of China(21878200 and 21676174)International S&T Cooperation Program of Shanxi province(201703D421038)+1 种基金Shanxi Scholarship Council of China(2017-036)Joint Fund of Shanxi Provincial Coal Seam Gas(2015012019)。
文摘Global warming and associated global climate change have led to serious efforts towards reducing CO_(2)emissions through the CO_(2)capture from the major emission sources.CO_(2)capture using the amine functionalized adsorbents is regard as a direct and effective way to reducing CO_(2)emissions due to their large CO_(2)adsorption amount,excellent CO_(2)adsorption selectivity and lower energy requirements for adsorbent regeneration.Moreover,large number of achievements on the amine functionalized solid adsorbent have been recorded for the enhanced CO_(2)capture in the past few years.In view of this,we review and analyze the recent advances in amine functionalized solid adsorbents prepared with different supporting materials including mesoporous silica,zeolite,porous carbon materials,metal organic frameworks(MOF)and other composite porous materials.In addition,amine functionalized solid adsorbents derived from waste resources are also reviewed because of the large number demand for cost-effective carbon dioxide adsorbents and the processing needs of waste resources.Considering the importance of the stability of the adsorbent in practical applications,advanced research in the capture cycle stability has also been summarized and analyzed.Finally,we summarize the review and offer the recommendations for the development of amine-based solid adsorbents for carbon dioxide capture.
