期刊文献+
共找到15,867篇文章
< 1 2 250 >
每页显示 20 50 100
Flame-retardant ammonium polyphosphate/MXene decorated carbon foam materials as polysulfide traps for fire-safe and stable lithium-sulfur batteries
1
作者 Yang Li Yong-Cheng Zhu +5 位作者 Sowjanya Vallem Man Li Seunghyun Song Tao Chen Long-Cheng Tang Joonho Bae 《Journal of Energy Chemistry》 SCIE EI CAS CSCD 2024年第2期313-323,I0008,共12页
Lithium-sulfur(Li-S)batteries are one of the most promising modern-day energy supply systems because of their high theoretical energy density and low cost.However,the development of high-energy density Li-S batteries ... Lithium-sulfur(Li-S)batteries are one of the most promising modern-day energy supply systems because of their high theoretical energy density and low cost.However,the development of high-energy density Li-S batteries with high loading of flammable sulfur faces the challenges of electrochemical performance degradation owing to the shuttle effect and safety issues related to fire or explosion accidents.In this work,we report a three-dimensional(3D)conductive nitrogen-doped carbon foam supported electrostatic self-assembled MXene-ammonium polyphosphate(NCF-MXene-APP)layer as a heat-resistant,thermally-insulated,flame-retardant,and freestanding host for Li-S batteries with a facile and costeffective synthesis method.Consequently,through the use of NCF-MXene-APP hosts that strongly anchor polysulfides,the Li-S batteries demonstrate outstanding electrochemical properties,including a high initial discharge capacity of 1191.6 mA h g^(-1),excellent rate capacity of 755.0 mA h g^(-1)at 1 C,and long-term cycling stability with an extremely low-capacity decay rate of 0.12%per cycle at 2 C.More importantly,these batteries can continue to operate reliably under high temperature or flame attack conditions.Thus,this study provides valuable insights into the design of safe high-performance Li-S batteries. 展开更多
关键词 FLAME-RETARDANT MXene ammonium polyphosphate Safety Lithium-sulfur battery
下载PDF
A review on surface coating strategies for anti-hygroscopic of high energy oxidizer ammonium dinitramide
2
作者 Hongyu Yang Fuyao Chen +6 位作者 Yiwen Hu Qiangqiang Lu Lei Xiao Yinglei Wang Fengqi Zhao Wei Jiang Gazi Hao 《Defence Technology(防务技术)》 SCIE EI CAS CSCD 2024年第3期237-269,共33页
Ammonium dinitramide(ADN),which has the advantages of high energy density,no halogen and low characteristic signal,is not only considered as a new high-energy oxidizer that is expected to replace the traditional oxidi... Ammonium dinitramide(ADN),which has the advantages of high energy density,no halogen and low characteristic signal,is not only considered as a new high-energy oxidizer that is expected to replace the traditional oxidizer ammonium perchlorate(AP)in solid propellants,but also a good performance explosive in itself.However,due to the strong hygroscopicity of ADN,its application in solid propellants and explosives is greatly limited.Solving the hygroscopicity of ADN is the key to realize the wide application of ADN.In this paper,we systematically review the research progress of anti-hygroscopic strategies of ADN coating.The surface coating methods are focusing on solvent volatilization,solvent-non-solvent,melt crystallization and atomic layer deposition technology.The characteristics of the different methods are compared and analyzed,and the basis for the classification and selection of the coating materials are introduced in detail.In addition,the feasibility of material for surface coating of ADN is evaluated by several compatibility analysis methods.It is highly expected that the liquid phase method(solvent volatilization method,solvent-non-solvent method)would be the promising method for future ADN coating because of its effective,safety and facile operation.Furthermore,polymer materials,are the preferred coating materials due to their high viscosity,easy adhesion,good anti-hygroscopic effect,and heat resistance,which make ADN weak hygroscopicity,less sensitive,easier to preserve and good compatibility. 展开更多
关键词 ammonium dinitramide(ADN) Energetic materials Anti-hygroscopic Surface coating Compatibility analysis
下载PDF
Ash removal from inferior coal via ammonium fluoride roasting and simultaneous yield of white carbon black
3
作者 Xuqin Duan Shuaiyu Lu +3 位作者 Yuxiao Fu Jiazhe Zhang Tong Liu Jian Ma 《International Journal of Mining Science and Technology》 SCIE EI CAS CSCD 2024年第2期261-279,共19页
The quality upgrading and deashing of inferior coal by chemical method still faces great challenges.The dangers of strong acid,strong alkali,waste water and exhaust gas as well as high cost limit its industrial produc... The quality upgrading and deashing of inferior coal by chemical method still faces great challenges.The dangers of strong acid,strong alkali,waste water and exhaust gas as well as high cost limit its industrial production.This paper systematically investigates the ash reduction and desilicification of two typical inferior coal utilizing ammonium fluoride roasting method.Under the optimal conditions,for fat coal and gas coal,the deashing rates are 69.02%and 54.13%,and the desilicification rates are 92.64%and 90.27%,respectively.The molar dosage of ammonium fluoride remains consistent for both coals;however,the gas coal,characterized by a lower ash and silica content(less than half that of the fat coal),achieves optimum deashing effect at a reduced time and temperature.The majority of silicon in coal transforms into gaseous ammonium fluorosilicate,subsequently preparing nanoscale amorphous silica with a purity of 99.90%through ammonia precipitation.Most of the fluorine in deashed coal are assigned in inorganic minerals,suggesting the possibility of further fluorine and ash removal via flotation.This research provides a green and facile route to deash inferior coal and produce nano-scale white carbon black simultaneously. 展开更多
关键词 Inferior coal Deashing treatment Silicon recycling ammonium fluoride roasting White carbon black
下载PDF
Simple preparation of C(CS)/g-C_(3)N_(4)/Co carbon aerogel and its catalytic performance for ammonium perchlorate
4
作者 Yujie Yan Bo Jin Rufang Peng 《Defence Technology(防务技术)》 SCIE EI CAS CSCD 2024年第3期186-196,共11页
Biomass chitosan(CS)was used as a template,graphitic phase carbon nitride(g-C_(3)N_(4))with high nitrogen content and certain catalytic activity was used as a dopant,and nano-transition metal cobalt(Co)was used as a c... Biomass chitosan(CS)was used as a template,graphitic phase carbon nitride(g-C_(3)N_(4))with high nitrogen content and certain catalytic activity was used as a dopant,and nano-transition metal cobalt(Co)was used as a catalytic center point.The carbon aerogel(C(CS)/g-C_(3)N_(4)/Co)with a three-dimensional network-like structure was prepared by assembling the three materials through experimental operations such as freeze-drying and high-temperature carbonization.It was demonstrated by scanning and transmission characterization that the CS in the carbon aerogel could provide more active sites for the cobalt nanoparticles,and the doping of graphite-phase carbon nitride as a template dispersed the cobalt nanoparticles and changed the conductivity of the CS.To investigate the catalytic effect of carbon aerogel on ammonium perchlorate(AP),it was investigated by differential thermal analyzer and TG thermal analysis.This carbon aerogel was very effective in catalyzing AP,and the 10 wt% content of the catalyst reduced the AP pyrolysis peak from 703.9 to 595.5 K.And to further investigate the synergistic effect of the three materials,further carbon aerogels such as C(CS)/Co,g-C_(3)N_(4)/Co were prepared and applied to catalyze AP,and the same ratio reduced the AP pyrolysis peak by 98.1℃ and 97.7℃.This result indicates a synergistic effect of the assembly of the three materials. 展开更多
关键词 g-C_(3)N_(4) CHITOSAN CO ammonium perchlorate Pyrolysis kinetics
下载PDF
Micro-aluminum powder with bi-or tri-component alloy coating as a promising catalyst:Boosting pyrolysis and combustion of ammonium perchlorate
5
作者 Chao Wang Ying Liu +6 位作者 Mingze Wu Jia Li Ying Feng Xianjin Ning Hong Li Ningfei Wang Baolu Shi 《Defence Technology(防务技术)》 SCIE EI CAS CSCD 2024年第3期100-113,共14页
A novel design of micro-aluminum(μAl)powder coated with bi-/tri-component alloy layer,such as:Ni-P and Ni-P-Cu(namely,Al@Ni-P,Al@Ni-P-Cu,respectively),as combustion catalysts,were introduced to release its huge energ... A novel design of micro-aluminum(μAl)powder coated with bi-/tri-component alloy layer,such as:Ni-P and Ni-P-Cu(namely,Al@Ni-P,Al@Ni-P-Cu,respectively),as combustion catalysts,were introduced to release its huge energy inside Al-core and promote rapid pyrolysis of ammonium perchlorate(AP)at a lower temperature in aluminized propellants.The microstructure of Al@Ni-P-Cu demonstrates that a three-layer Ni-P-Cu shell,with the thickness of~100 nm,is uniformly supported byμAl carrier(fuel unit),which has an amorphous surface with a thickness of~2.3 nm(catalytic unit).The peak temperature of AP with the addition of Al@Ni-P-Cu(3.5%)could significantly drop to 316.2℃ at high-temperature thermal decomposition,reduced by 124.3℃,in comparison to that of pure AP with 440.5℃.It illustrated that the introduction of Al@Ni-P-Cu could weaken or even eliminate the obstacle of AP pyrolysis due to its reduction of activation energy with 118.28 kJ/mol.The laser ignition results showed that the ignition delay time of Al@Ni-P-Cu/AP mixture with 78 ms in air is shorter than that of Al@Ni-P/AP(118 ms),decreased by 33.90%.Those astonishing breakthroughs were attributed to the synergistic effects of adequate active sites on amorphous surface and oxidation exothermic reactions(7597.7 J/g)of Al@Ni-P-Cu,resulting in accelerated mass and/or heat transfer rate to catalyze AP pyrolysis and combustion.Moreover,it is believed to provide an alternative Al-based combustion catalyst for propellant designer,to promote the development the propellants toward a higher energy. 展开更多
关键词 Micro-aluminum powder(μAl) Nano-sized alloy coating Combustion catalyst ammonium perchlorate Pyrolysis behavior Ignition and combustion
下载PDF
Humic Acid Effects on Reducing Corn Leaf Burn Caused by Foliar Spray of Urea-Ammonium Nitrate at Different Humic Acid/Urea-Ammonium Nitrate Ratios
6
作者 Xinhua Yin 《Open Journal of Soil Science》 2024年第3期180-189,共10页
Technologies for reducing corn leaf burn caused by foliar spray of urea-ammonium nitrate (UAN) during the early growing season are limited. A field experiment was carried out to evaluate the effects of humic acid on c... Technologies for reducing corn leaf burn caused by foliar spray of urea-ammonium nitrate (UAN) during the early growing season are limited. A field experiment was carried out to evaluate the effects of humic acid on corn leaf burn caused by foliar spray of undiluted UAN solution on corn canopy at Jackson, TN in 2018. Thirteen treatments of the mixtures of UAN and humic acid were evaluated at V6 of corn with different UAN application rates and different UAN/humic acid ratios. Leaf burn during 1 2, 3, 4, 5, 6, 7, and 14 days after UAN foliar spray significantly differed between with or without humic acid addition. The addition of humic acid to UAN significantly reduced leaf burn at each UAN application rate (15, 25, and 35 gal/acre). The reduction of leaf burn was enhanced as the humic acid/UAN ratio went up from 10% to 30%. Leaf burn due to foliar application of UAN became severer with higher UAN rates. The linear regression of leaf burn 14 days after application with humic acid/UAN ratio was highly significant and negative. However, the linear regression of leaf burn 14 days after application with the UAN application rate was highly significant and positive. In conclusion, adding humic acid to foliar-applied UAN is beneficial for reducing corn leaf burn during the early growing season. 展开更多
关键词 Humic Acid Urea-ammonium Nitrate CORN Leaf Burn N rate Ratio
下载PDF
Activation mechanism of ammonium oxalate with pyrite in the lime system and its response to flotation separation of pyrite from arsenopyrite 被引量:3
7
作者 Runpeng Liao Shuming Wen +2 位作者 Qicheng Feng Jiushuai Deng Hao Lai 《International Journal of Minerals,Metallurgy and Materials》 SCIE EI CAS CSCD 2023年第2期271-282,共12页
The activation properties of ammonium oxalate on the flotation of pyrite and arsenopyrite in the lime system were studied in this work.Single mineral flotation tests showed that the ammonium oxalate strongly activated... The activation properties of ammonium oxalate on the flotation of pyrite and arsenopyrite in the lime system were studied in this work.Single mineral flotation tests showed that the ammonium oxalate strongly activated pyrite in high alkalinity and high Ca^(2+)system,whereas arsenopyrite was almost unaffected.In mineral mixtures tests,the recovery difference between pyrite and arsenopyrite after adding ammonium oxalate is more than 85%.After ammonium oxalate and ethyl xanthate treatment,the hydrophobicity of pyrite increased significantly,and the contact angle increased from 66.62°to 75.15°and then to 81.21°.After ammonium oxalate treatment,the amount of ethyl xanthate adsorption on the pyrite surface significantly increased and was much greater than that on the arsenopyrite surface.Zeta potential measurements showed that after activation by ammonium oxalate,there was a shift in the zeta potential of pyrite to more negative values by adding xanthate.X-ray photoelectron spectroscopy test showed that after ammonium oxalate treatment,the O 1s content on the surface of pyrite decreased from 44.03%to 26.18%,and the S 2p content increased from 14.01%to 27.26%,which confirmed that the ammonium oxalatetreated pyrite surface was more hydrophobic than the untreated surface.Therefore,ammonium oxalate may be used as a selective activator of pyrite in the lime system,which achieves an efficient flotation separation of S-As sulfide ores under high alkalinity and high Ca2+concentration conditions. 展开更多
关键词 PYRITE ARSENOPYRITE ammonium oxalate flotation separation
下载PDF
Solid-liquid phase equilibrium for the system ammonium polyphosphate-urea ammonium nitrate-potassium chloride-water at 273.2 K
8
作者 Xingjuan Liang Dehua Xu +5 位作者 Zhengjuan Yan Jingxu Yang Xinlong Wang Zhiye Zhang Jingli Wu Honggang Zhen 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2023年第8期131-142,共12页
Based on the dynamic method,a quaternary system of ammonium polyphosphate (APP)-urea ammonium nitrate (UAN,CO(NH_(2))_(2)-NH_(4)NO_(3))-potassium chloride (KCl)-H_(2)O and its subsystems (APP-[CO(NH_(2))_(2)-NH_(4)NO_... Based on the dynamic method,a quaternary system of ammonium polyphosphate (APP)-urea ammonium nitrate (UAN,CO(NH_(2))_(2)-NH_(4)NO_(3))-potassium chloride (KCl)-H_(2)O and its subsystems (APP-[CO(NH_(2))_(2)-NH_(4)NO_(3)]-H_(2)O,KCl-[CO(NH_(2))_(2)-NH_(4)NO_(3)]-H_(2)O and APP-KCl-H_(2)O) were systematically investigated at the temperature of 273.2 K.Each ternary phase diagram contains one invariant point and three crystallization regions.The crystallization regions are:(1)(NH_(4))_(3)HP_(2)O_(7),(NH_(4))_(4)P_(2)O_(7)and ((NH_(4))_(3)HP_(2)O_(7)+(NH_(4))_(4)P_(2)O_(7)) for APP-[CO(NH_(2))_(2)-NH_(4)NO_(3)]-H_(2)O diagram;(2) KCl,KNO_(3)and(KCl+KNO_(3)) for KCl-[CO(NH_(2))_(2)-NH_(4)NO_(3)]-H_(2)O diagram and (3)(NH_(4))_(3)HP_(2)O_(7),KCl and((NH_(4))_(3)HP_(2)O_(7)+KCl) for APP-KCl-H_(2)O diagram.The quaternary phase diagram of APP-[CO(NH_(2))_(2)-NH_(4)NO_(3)]-KCl-H_(2)O has no quaternary invariant point but includes four solid phase crystallization regions,i.e.,(NH_(4))_(3)HP_(2)O_(7),(NH_(4))_(4)P_(2)O_(7),KNO_(3)and KCl,in which the KNO_(3)region occupies the largest area.The maximum total nutrient content (N+P_(2)O_(5)+K_(2)O) existing as ionic forms in the APP-[CO(NH_(2))_(2)-NH_(4)NO_(3)]-H_(2)O,KCl-[CO(NH_(2))_(2)-NH_(4)NO_(3)]-H_(2)O,APP-KCl-H_(2)O and quaternary systems is 44.70%,32.86%,45.56%and 46.23%(mass),respectively,indicating that the maximum nutrient content can be reached using raw materials of the corresponding systems to prepare liquid fertilizer.In the quaternary system,the content of NH_(4)~+-N ascends with the increase of the total nutrient content,while the contents of NO_(3)^(-)-N and CO(NH_(2))_(2)-N increase with elevated total N.This work can help optimize the operating parameters for the production,storage and transportation of liquid fertilizers. 展开更多
关键词 Water-soluble ammonium polyphosphate Urea ammonium nitrate(UAN) Phase equilibria SOLUBILITY THERMODYNAMICS
下载PDF
Studies on ammonium dinitramide and 3,4-diaminofurazan cocrystal for tuning the hygroscopicity
9
作者 Dongdong Hu Yinglei Wang +3 位作者 Chuan Xiao Yifei Hu Zhiyong Zhou Zhongqi Ren 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2023年第9期157-164,共8页
Ammonium dinitramide(ADN)is a promising oxidizer with high energy characteristic,which is a relatively new environmentally friendly oxidizer without halogens and carbon elements.However,ADN has high hygroscopicity whe... Ammonium dinitramide(ADN)is a promising oxidizer with high energy characteristic,which is a relatively new environmentally friendly oxidizer without halogens and carbon elements.However,ADN has high hygroscopicity when exposed to high humidity air,restricting its applications on the solid propellants.In this paper,a novel energetic cocrystal composed of ammonium dinitramide and 3,4-diaminofurazan(DAF)was proposed and successfully synthesized by antisolvent crystallization method,and the properties of the cocrystal were systematically investigated by analytical characterization and theoretical simulation calculations.The formation of the cocrystal was confirmed by powder X-ray diffraction,differential scanning calorimetry,scanning electron microscopy,infrared spectroscopy and Raman spectroscopy,indicating that the synthesized product was a cocrystal.Through theoretical studies,the ADN/DAF cocrystal structure was predicted,and the powder X-ray diffraction,morphology,water sorption capacity of ADN/DAF cocrystal were calculated,which was consistent with experimental phenomena.The results showed that newly prepared cocrystal of ADN/DAF had lower hygroscopicity compared to pure ADN,and the water sorption capacity was reduced from 15.35%to 7.90%.This may be due to the formation of N-H…O medium-strength hydrogen bonds between the ammonium ion of ADN and the O atom of DAF in the cocrystal,which prevents the binding of water molecules in the air and ammonium ions and reduces the probability of ADN binding to water molecules,leading to the reduction of cocrystal hygroscopicity.The newly prepared energetic cocrystal can provide theoretical and technical guidance for the study of the anti-hygroscopicity of ADN and advance the practical application of ADN. 展开更多
关键词 ammonium dinitramide 3 4-Diaminofurazan HYGROSCOPICITY COCRYSTALLIZATION ADSORPTION KINETICS
下载PDF
Wettability alteration of organo-vermiculites induced by layer charge and tailored bis-N-heterocyclic quaternary ammonium salts
10
作者 Fan Ding Xin Jin +3 位作者 Tao Shen Shan-Shan Mao Qing Zhao Mang-Lai Gao 《Petroleum Science》 SCIE EI CAS CSCD 2023年第4期2596-2603,共8页
Wettability is an important surface property that deserves to further explore the factors on its alteration.Series of bis-N-heterocyclic quaternary ammonium salts with different spacer length and N-heterocyclic headgr... Wettability is an important surface property that deserves to further explore the factors on its alteration.Series of bis-N-heterocyclic quaternary ammonium salts with different spacer length and N-heterocyclic headgroups(morpholinium(BMMB,BMMD and BMMH),piperidinium(BPMH)and piperazinium(BMPMH))have been synthesized and employed for altering the wettability of vermiculite and its derivates(Vts)treated by Li^(+)-saturated heating method.The results of X-ray diffraction(XRD),Fourier transform infrared spectroscopy(FT-IR),thermogravimetric analysis(TG-DTG),scanning electron microscopy(SEM)and N_(2)adsorption/desorption isotherms indicate that all of the bis-N-heterocyclic quaternary ammonium salts have been successfully inserted into the vermiculite layers,leading to the organic monolayer.The results of capillary rise tests combined with Lipophilic to Hydrophilic Ratio(LHR)values unveil the wettability alteration of the organo-Vts.As the layer charge decreases,the hydrophilicity of the organo-Vts gradually increases,which is probably caused by the decline in binding sites.As the result of the change in spacer length of modifier,the wetting properties of morpholinium-based organo-Vts change in order of BMMD-Vts>BMMH-Vts>BMMB-Vts,and difference in N-heterocyclic headgroups leads to the sequence of wettability:BMPMH-Vts>BPMH-Vts>BMMH-Vts.Layer charge of Vt,spacer length and the type of the N-heterocyclic headgroup of modifier have the synergistic effect on the regulation of the wettability. 展开更多
关键词 VERMICULITE bis-N-heterocyclic quaternary ammonium SALTS Organo-vermiculite Layer charge Wettability alteration
下载PDF
Effect of ammonium sulfate on the formation of zinc sulfide species on hemimorphite surface and its role in sulfidation flotation
11
作者 Xi Zhang Yu Wang +5 位作者 Jiushuai Deng Zhongyi Bai Hongxiang Xu Qingfeng Meng Da Jin Zhenwu Sun 《International Journal of Minerals,Metallurgy and Materials》 SCIE EI CAS CSCD 2023年第11期2147-2156,共10页
Effectively strengthening the surface sulfidation is essential for recovering hemimorphite by froth flotation.In this work,inductively coupled plasma optical emission spectrometer(ICP-OES)measurements,Visual MINTEQ ca... Effectively strengthening the surface sulfidation is essential for recovering hemimorphite by froth flotation.In this work,inductively coupled plasma optical emission spectrometer(ICP-OES)measurements,Visual MINTEQ calculation,X-ray photoelectron spectroscopy(XPS)analysis,time of flight secondary ion mass spectrometry(ToF-SIMS)analysis,and micro-flotation experiments were explored to systematically investigate the effect of ammonium sulfate((NH_(4))_(2)SO_(4))on the formation of zinc sulfide species on hemimorphite surface and its role in sulfidation flotation.The results showed that(NH_(4))_(2)SO_(4)exhibited a positive influence on hemimorphite sulfidation flotation.It was ascribed to the number of zinc components in the form of Zn^(2+)and[Zn(NH_(3))_(i)]^(2+)(i=1–4)increased in the flotation system after hemimorphite treatment with(NH_(4))_(2)SO_(4),which was beneficial to its interaction with sulfur species in solution,resulting in a dense and stable zinc sulfide layer generated on the hemimorphite surface.[Zn(NH_(3))_(i)]^(2+)participated in the sulfidation reaction of hemimorphite as a transition state.In addition the sulfidation reaction of hemimorphite was accelerated by(NH_(4))_(2)SO_(4).Thus,(NH_(4))_(2)SO_(4)presents a vital role in promoting the sulfidation of hemimorphite. 展开更多
关键词 HEMIMORPHITE SULFIDATION ammonium sulfate zinc sulfide species ADSORPTION FLOTATION
下载PDF
Fabrication of alginate-based microspheres with cellular structure for tuning ammonium dinitramide performance
12
作者 Dun-ju Wang Xu Zhou +4 位作者 Yao-feng Mao Xin Wang Ye-ming Huang Rui-hao Wang Da-wei Zheng 《Defence Technology(防务技术)》 SCIE EI CAS CSCD 2023年第10期111-120,共10页
Recently,an emerging category green of energetic material ammonium dinitramide(ADN)has exhibited promising application in propellants due to its outstanding merits in energy release and environmental friendliness.It c... Recently,an emerging category green of energetic material ammonium dinitramide(ADN)has exhibited promising application in propellants due to its outstanding merits in energy release and environmental friendliness.It can be considered to substitute traditional oxidizer of ammonium perchlorate(AP)in military systems and aerospace.In this paper,a novel spherical energetic composite ADN/copper alginate(CA)with a microporous structure was designed and prepared by the W/O gel emulsion method,and a desirable porous microsphere structure was obtained.Multiple characterization techniques were used to investigate the structure and properties of ADN/CA composites.The results showed that ADN crystals were homogeneously encapsulated in an alginate-gel matrix.Thermal decomposition temperature was reduced to 151.7℃compared to ADN,while the activation energy of them was reduced from 129.73 k J/mol(ADN)to 107.50 k J/mol(ADN/CA-4).In addition,as-prepared samples had lower impact and frictional sensitivity than ADN.The mechanism of sensitivity reduction and decomposition are also discussed.Constant-volume combustion tests show that peak pressure of the ADN/CA-4 achieves 253.4 k Pa and pressurization rate of 2750.4 k Pa/s.Hence,this has a promising application in improving the combustion performance and safety performance of solid propellants. 展开更多
关键词 ammonium dinitramide Sodium alginate MICROSPHERES High reactivity Energetic materials
下载PDF
A review on the high energy oxidizer ammonium dinitramide:Its synthesis,thermal decomposition,hygroscopicity,and application in energetic materials
13
作者 Fu-yao Chen Chun-lei Xuan +8 位作者 Qiang-qiang Lu Lei Xiao Jun-qing Yang Yu-bing Hu Guang-Pu Zhang Ying-lei Wang Feng-qi Zhao Ga-zi Hao Wei Jiang 《Defence Technology(防务技术)》 SCIE EI CAS CSCD 2023年第1期163-195,共33页
Ammonium dinitramide(ADN)is considered as a potential substitute for ammonium perchlorate in energetic materials due to its high density,positive oxygen balance,and halogen-free characteristics.However,its application... Ammonium dinitramide(ADN)is considered as a potential substitute for ammonium perchlorate in energetic materials due to its high density,positive oxygen balance,and halogen-free characteristics.However,its application has been severely limited because of its strong hygroscopicity,difficult storage,and incompatibility with isocyanate curing agents.In order to better bloom the advantages of the highly energetic and environment-friendly ADN in the fields of energetic materials,an in-depth analysis of the current situation and discussion of key research points are particularly important.In this paper,a detailed overview on the synthesis,thermal decomposition,hygroscopic mechanism,and antihygroscopicity of ADN has been discussed,its application in powdes and explosives are also presented,and its future research directions are proposed. 展开更多
关键词 ammonium dinitramide High energy oxidizer SYNTHESIS PROPERTIES APPLICATIONS
下载PDF
Adsorption characteristics of Pb(Ⅱ)ions on sulfidized hemimorphite surface under ammonium sulfate system
14
作者 Xi Zhang Jiushuai Deng +5 位作者 Yu Wang Sihao Li Honghui Zhao Chang Liu Zhitao Ma Zhenwu Sun 《International Journal of Mining Science and Technology》 SCIE EI CAS CSCD 2023年第4期511-518,共8页
In this work,the effect of ammonium sulfate on the adsorption characteristics of low-concentration Pb(Ⅱ)ions on the sulfidized hemimorphite surface was comprehensively investigated.The results showed that ammonium su... In this work,the effect of ammonium sulfate on the adsorption characteristics of low-concentration Pb(Ⅱ)ions on the sulfidized hemimorphite surface was comprehensively investigated.The results showed that ammonium sulfate could increase the maximum recovery of hemimorphite from 69.42%to 88.24%under a low concentration of Pb(Ⅱ)ions.On the hemimorphite surface pretreated with ammonium sulfate,the adsorption of Pb(Ⅱ)ions was enhanced and the main species of Pb adsorbed was changed from Pb―O/OH to PbS.This was due to the larger amount of ZnS providing more effective adsorption sites for Pb components to generate Pb S.Meanwhile,the intensity of ZnS decreased with the formation of PbS,demonstrating that ZnS was covered by PbS which formed later on the mineral surface.It was beneficial for the adsorption of butyl xanthate on the hemimorphite surface to form more hydrophobic substances.As a result,ammonium sulfate played a crucial role in realizing the efficient recovery of hemimorphite. 展开更多
关键词 HEMIMORPHITE Sulfidation flotation ammonium sulfate Pb(II)ions Adsorption characteristics
下载PDF
Dimethylammonium cation stabilizes all-inorganic perovskite solar cells
15
作者 Zuolin Zhang Mengjia Li +3 位作者 Jie Sun Cong Chen Jiangzhao Chen Liming Ding 《Journal of Semiconductors》 EI CAS CSCD 2023年第3期4-8,共5页
Facing the poor environmental stability of traditional methylammonium or formamidinium-based lead halide per-ovskites,scientists turn their attention to inorganic lead hal-ide perovskites(ILHPs)with narrow bandgaps,ex... Facing the poor environmental stability of traditional methylammonium or formamidinium-based lead halide per-ovskites,scientists turn their attention to inorganic lead hal-ide perovskites(ILHPs)with narrow bandgaps,excellent thermal stability and reduced ion migration compared to their organic/inorganic counterparts[1−4].Up to now,the PCEs for ILHP solar cells exceed 21%[5].Especially,the preferred black ILHP(e.g.CsPbI3)with the smallest bandgap of~1.7 eV and single-halide composition for avoiding phase separation is crucial for high-performance single-junction solar cells and can be applied in tandem devices as the top cells[6,7].However,small Cs+(167 pm)in CsPbI3 with a tolerance factor close to 0.8 is unsuitable for the 3D PbI3-framework[8].The mis-matched size of cations will induce lattice strain and the per-ovskite spontaneously transforms to undesired non-photoact-ive yellow phase(δ-phase,like NH4CdCl3)(Fig.1(a))[9,10].There-fore,improving lattice symmetry and reducing lattice strain are the strategies for inhibiting the phase transition of ILHPs. 展开更多
关键词 INORGANIC PEROVSKITE ammonium
下载PDF
Ammonium Metavanadate Fabricated by Selective Precipitation of Impurity Chemicals on Inorganic Flocculants
16
作者 Bo Shi Dandan Zhu +3 位作者 Pengxiang Lei Ximin Li Hengbo Xiao Lihua Qian 《Journal of Renewable Materials》 SCIE EI 2023年第4期1951-1961,共11页
High purity ammonium metavanadate(NH_(4)VO_(3))is the most vital chemical to produce V2O5,VO2,VN alloy,VFe alloy and VOSO4,which have some prospective applications for high strength steel,smart window,infrared detecto... High purity ammonium metavanadate(NH_(4)VO_(3))is the most vital chemical to produce V2O5,VO2,VN alloy,VFe alloy and VOSO4,which have some prospective applications for high strength steel,smart window,infrared detector and imaging,large scale energy storage system.NH_(4)VO_(3)is usually produced by spontaneous crystallization from the aqueous solution due to its sharp dependence of solubility on the temperature.However,hazardous chemicals in industrial effluent,include phosphorate,silicate and arsenate,causing severe damage to the environment.In this work,these impurities are selectively precipitated onto inorganic flocculants,while the vanadate dissolved in an aqueous solution keeps almost undisturbed.Therefore,high purity NH_(4)VO_(3)is produced by the crystallization from the purified solution.By screening various flocculants and precipitating parameters,polyaluminum sulfate with an optimal amount of 50 g/L,is demonstrated to selectively remove phosphorate,silicate and arsenate,corresponding to the removing efficiency of 93.39%,97.11%and 88.31%,respectively.NH_(4)VO_(3)from the purified solution holds a purity of 99.21%,in comparison with 98.33%in the product from the crude solution.This purifying technology cannot only produce NH_(4)VO_(3)with high added value,but also reduce the environmental pollution of waste liquid. 展开更多
关键词 ammonium metavanadate flocculating agent phosphate ARSENATE cooling precipitation vanadium slag bayer alumina liquor
下载PDF
接枝交联双重改性淀粉IStD絮凝性能研究
17
作者 李海花 高玉华 +3 位作者 郑玉轩 李娜 张利辉 刘振法 《工业水处理》 CAS CSCD 北大核心 2024年第2期133-138,共6页
以玉米淀粉(St)为原料,环氧氯丙烷(EPI)为交联剂,甲基丙烯酰氧乙基三甲基氯化铵(DMC)为接枝单体,两步法合成了接枝交联双重改性淀粉基絮凝剂IStD。测试了投药量、pH、高岭土质量分数、絮凝温度和絮凝时间对IStD絮凝性能的影响。结果表明... 以玉米淀粉(St)为原料,环氧氯丙烷(EPI)为交联剂,甲基丙烯酰氧乙基三甲基氯化铵(DMC)为接枝单体,两步法合成了接枝交联双重改性淀粉基絮凝剂IStD。测试了投药量、pH、高岭土质量分数、絮凝温度和絮凝时间对IStD絮凝性能的影响。结果表明,当高岭土质量分数为2%,投药质量浓度为14 mg/L,pH=7,絮凝温度为25℃,絮凝时间为1 h时,上清液的透光率可达91.7%。通过观察投药前后水体中高岭土颗粒的分散状态,初步探讨了IStD的絮凝机理。结果表明在絮凝过程中,同时存在电中和与吸附架桥作用,以电中和作用为主。当IStD和CPAM复配用于处理生活废水时,透光率和COD去除率都能达到90%以上,具有一定的实用价值。 展开更多
关键词 改性淀粉 甲基丙烯酰氧乙基三甲基氯化铵 絮凝
下载PDF
一种咪唑季铵盐Gemini表面活性剂的合成及性能研究
18
作者 郭乃妮 沈明 +4 位作者 王文博 刘洋 马千淳 曹妙泷 刘盼盼 《皮革与化工》 CAS 2024年第2期26-29,共4页
超声条件下以咪唑、1,4-二溴丁烷、1-溴代十六烷为主要原料合成了一种咪唑季铵盐Gemini表面活性剂。通过FTIR和熔点测量对产物进行了结构分析,采用液体折光率法测定了产物的临界胶束浓度(CMC),对产物的泡沫性能和乳化性能进行了研究。... 超声条件下以咪唑、1,4-二溴丁烷、1-溴代十六烷为主要原料合成了一种咪唑季铵盐Gemini表面活性剂。通过FTIR和熔点测量对产物进行了结构分析,采用液体折光率法测定了产物的临界胶束浓度(CMC),对产物的泡沫性能和乳化性能进行了研究。实验结果表明:产物的产率为82.7%,CMC为2.5×10^(-3)mol/L,泡沫稳定性高,起泡能力强,乳化能力好,是一种性能良好的O/W型乳化剂,可应用于日用化工、皮革造纸、纺织印染、石油化工等领域。 展开更多
关键词 咪唑 季铵盐 GEMINI CMC 泡沫性 乳化性
下载PDF
丙烯酰胺/甲基丙烯酰氧乙基三甲基氯化铵的水分散聚合物制备
19
作者 张彦昌 林朝阳 +4 位作者 霍炳臣 郝小飞 王冬梅 李天仚 赵献增 《河南科学》 2024年第2期255-262,共8页
以丙烯酰胺(AM)、甲基丙烯酰氧乙基三甲基氯化铵(DMC)为共聚单体,过硫酸铵为引发剂,自制聚甲基丙烯酰氧乙基三甲基氯化铵(PDMC)为分散剂,在硫酸铵水溶液中采用水分散聚合法,制备了丙烯酰胺/甲基丙烯酰氧乙基三甲基氯化铵共聚水分散体.... 以丙烯酰胺(AM)、甲基丙烯酰氧乙基三甲基氯化铵(DMC)为共聚单体,过硫酸铵为引发剂,自制聚甲基丙烯酰氧乙基三甲基氯化铵(PDMC)为分散剂,在硫酸铵水溶液中采用水分散聚合法,制备了丙烯酰胺/甲基丙烯酰氧乙基三甲基氯化铵共聚水分散体.考察了分散聚合过程中体系黏度变化,引发剂用量、硫酸铵的用量、分散剂的用量对共聚物黏度、分子量、颗粒尺寸的影响,并对其结构进行了鉴定.实验发现,在30℃,AM、DMC总单体质量分数为15%,DMC与AM物质的量比为1∶9,过硫酸铵浓度范围为0.70×10^(-4)~2.8×10^(-4)mol/L,硫酸铵质量分数范围为26.51%~28.1%,分散剂PDMC质量分数范围为1.1%~1.3%条件下,可以制备出黏度低、稳定性好的丙烯酰胺/甲基丙烯酰氧乙基三甲基氯化铵共聚水分散体. 展开更多
关键词 阳离子聚丙烯酰胺 丙烯酰胺 甲基丙烯酰氧乙基三甲基氯化铵 水分散聚合
下载PDF
乙二胺四乙酸-乙酸铵盐交换法测定阳离子交换量方法优化
20
作者 王卓 郭全恩 +1 位作者 曹诗瑜 展宗冰 《化学分析计量》 CAS 2024年第2期87-92,共6页
针对乙二胺四乙酸(EDTA)-乙酸铵交换法测定土壤阳离子交换量耗时长的问题,对方法的搅拌方式、搅拌时间、蒸馏时间进行优化。优化后分析条件为:用磁力搅拌器代替人工橡皮头玻璃棒搅拌,确定搅拌时间为90 s,确定蒸馏时间为6 min。选择4个... 针对乙二胺四乙酸(EDTA)-乙酸铵交换法测定土壤阳离子交换量耗时长的问题,对方法的搅拌方式、搅拌时间、蒸馏时间进行优化。优化后分析条件为:用磁力搅拌器代替人工橡皮头玻璃棒搅拌,确定搅拌时间为90 s,确定蒸馏时间为6 min。选择4个不同地区不同阳离子交换量的土壤标准物质用优化前、后的方法分别进行7次测定,其检测结果相对标准偏差为1.53%~5.32%;28个实际样品进行成对二样本均值分析,优化前、优化后测定的土壤阳离子交换量结果无显著性差异;对优化前、后28个土壤样品阳离子交换量测定结果进行相关性分析,线性相关显著,相关系数r=0.998。结果表明,EDTA-乙酸铵交换法优化前、后均具有较好的精密度和准确度,结果无显著性差异,EDTA乙酸铵交换法优化后的方法检测时间(1人测定8个样品)由280 min缩短到130 min,提高了检测效率,适合批量石灰性土壤阳离子代换量的测定。 展开更多
关键词 土壤 阳离子交换量 乙二胺四乙酸-乙酸铵交换法 磁力搅拌器
下载PDF
上一页 1 2 250 下一页 到第
使用帮助 返回顶部