The radiated seismic energy is an important index for the intensity assessment of microseismic(MS)events and the early warning of dynamic disasters.However,the energy of MS signals is significantly attenuated due to t...The radiated seismic energy is an important index for the intensity assessment of microseismic(MS)events and the early warning of dynamic disasters.However,the energy of MS signals is significantly attenuated due to the heterogeneity and viscous damping of rock media.Therefore,the study on attenuation characteristics of MS signals in underground engineering has practical significance for the accurately estimation of radiated seismic energy.Based on a pendulum impact test facility and MS monitoring system,an in situ investigation was carried out to explore attenuation characteristics at a deep tunnel.The results show that the seismic energy and peak particle velocity(PPV)attenuation are exponentially related to the propagation distance.The attenuation coefficient of energy is larger than that of PPV.With the increase in the input impact-energy,the seismic energy attenuation coefficient decreases as a power function.An empirical relationship between energy attenuation coefficient and wave impedance of rock mass was established in this scenario.Moreover,the time-frequency characteristics and energy distribution laws of impact-induced signals were investigated by the continuous wavelet transform(CWT)and wavelet packet analyses,respectively.The dominant frequency of signals decreases gradually as the propagation distance increases.Based on the energy attenuation characteristics,a new method was proposed to calculate the released source energy of MS events in the field.This study can provide an insight into energy attenuation characteristics of seismic waves and references for attenuation correction in seismic energy calculation.展开更多
In order to further deepen the understanding of seismic wave propagation characteristics induced by the large volume airgun source,experimental data from multiple fixed excitation points in Fujian Province were used t...In order to further deepen the understanding of seismic wave propagation characteristics induced by the large volume airgun source,experimental data from multiple fixed excitation points in Fujian Province were used to obtain the equivalent single excitation high signal-to-noise ratio velocity and displacement records through linear stacking and simulation techniques.Then the peak displacements of different epicentral distances were used to calculate the equivalent magnitude of the airgun source excitation at different fixed excitation points so as to establish the attenuation relationship between equivalent magnitude,epicenter distance and velocity peak.Our results show that:①Within 270 km of epicentral distance,for the large-volume airgun’s single shot,the peak velocity range is about 700-4 nm/s,and the peak displacement range is about 200.0-0.2 nm;②The equivalent magnitude of the P-wave from the airgun source with a total capacity of 8,000 in 3 is 0.181-0.760,and the equivalent magnitude of the S-wave is 0.294-0.832.By contrast,the equivalent magnitude of the P-wave from the airgun source with a total capacity of 12,000 in 3 is 0.533-0.896,and the equivalent magnitude of the S-wave is 0.611-0.946.The S-wave energy is greater than the P-wave energy,and the excitation efficiency varies greatly with different excitation environment;③The peak velocity increases with the equivalent magnitude,and decreases with the epicentral distance.The vertical component of the P-wave peak velocity is the largest among those three components,while the S-wave has the smallest vertical component and similar horizontal components.Hence,our research can provide an important basis for the quantitative judgment of the seismic wave propagation distance using the airgun and the design of the observation system in deep exploration or monitoring with airgun.展开更多
Most production methods of heavy oil involve thermal production.However,it is challenging to delineate the thermal-affected zone due to complex reservoir conditions.With steam injected,the heavy oil viscosity drops;th...Most production methods of heavy oil involve thermal production.However,it is challenging to delineate the thermal-affected zone due to complex reservoir conditions.With steam injected,the heavy oil viscosity drops;the reservoir density and velocity decrease accordingly,causing changes to seismic impedance.Moreover,the oil-and-water viscosity ratio and permeability show the difference with changing temperature,indicating that the reservoir’s ability to transmit seismic waves would also be temperature-dependent.Therefore,the seismic responses and attenuation characteristics of the steam chamber can be helpful to monitor the steam-affected zone.We introduce an improved viscoelastic model to approximate the heavy oil reservoir during thermal production,and use the frequency-space domain finite difference algorithm to simulate the seismic wave-fields.Numerical results demonstrate that this model is applicable to a wide temperature range,and can effectively reveal the seismic characteristics of the steam chamber.Through analyzing the propagation differences of seismic waves under different temperatures,it is concluded that the attenuation coefficient,root-meansquare amplitude difference and amplitude ratio of PP-wave and PS-wave under different conditions can reveal the temperature variation in the steam chamber,with which it is possible to detect the steam chamber spatial distribution.展开更多
Based on some assumptions, the dynamic analysis model of anchorage system is established. The dynamic governing equation is expressed as finite difference format and programmed by using MATLAB language. Compared with ...Based on some assumptions, the dynamic analysis model of anchorage system is established. The dynamic governing equation is expressed as finite difference format and programmed by using MATLAB language. Compared with theoretical method, the finite difference method has been verified to be feasible by a case study. It is found that under seismic loading, the dynamic response of anchorage system is synchronously fluctuated with the seismic vibration. The change of displacement amplitude of material points is slight, and comparatively speaking, the displacement amplitude of the outside point is a little larger than that of the inside point, which shows amplification effect of surface. While the axial force amplitude transforms considerably from the inside to the outside. It increases first and reaches the peak value in the intersection between the anchoring section and free section, then decreases slowly in the free section. When considering damping effect of anchorage system, the finite difference method can reflect the time attenuation characteristic better, and the calculating result would be safer and more reasonable than the dynamic steady-state theoretical method. What is more, the finite difference method can be applied to the dynamic response analysis of harmonic and seismic random vibration for all kinds of anchor, and hence has a broad application prospect.展开更多
基金The support provided by the National Natural Science Foundation of China(Grant Nos.51978541,41941018 and 51839009)is gratefully acknowledged。
文摘The radiated seismic energy is an important index for the intensity assessment of microseismic(MS)events and the early warning of dynamic disasters.However,the energy of MS signals is significantly attenuated due to the heterogeneity and viscous damping of rock media.Therefore,the study on attenuation characteristics of MS signals in underground engineering has practical significance for the accurately estimation of radiated seismic energy.Based on a pendulum impact test facility and MS monitoring system,an in situ investigation was carried out to explore attenuation characteristics at a deep tunnel.The results show that the seismic energy and peak particle velocity(PPV)attenuation are exponentially related to the propagation distance.The attenuation coefficient of energy is larger than that of PPV.With the increase in the input impact-energy,the seismic energy attenuation coefficient decreases as a power function.An empirical relationship between energy attenuation coefficient and wave impedance of rock mass was established in this scenario.Moreover,the time-frequency characteristics and energy distribution laws of impact-induced signals were investigated by the continuous wavelet transform(CWT)and wavelet packet analyses,respectively.The dominant frequency of signals decreases gradually as the propagation distance increases.Based on the energy attenuation characteristics,a new method was proposed to calculate the released source energy of MS events in the field.This study can provide an insight into energy attenuation characteristics of seismic waves and references for attenuation correction in seismic energy calculation.
基金the National Natural Science Foundation of China(41790461)
文摘In order to further deepen the understanding of seismic wave propagation characteristics induced by the large volume airgun source,experimental data from multiple fixed excitation points in Fujian Province were used to obtain the equivalent single excitation high signal-to-noise ratio velocity and displacement records through linear stacking and simulation techniques.Then the peak displacements of different epicentral distances were used to calculate the equivalent magnitude of the airgun source excitation at different fixed excitation points so as to establish the attenuation relationship between equivalent magnitude,epicenter distance and velocity peak.Our results show that:①Within 270 km of epicentral distance,for the large-volume airgun’s single shot,the peak velocity range is about 700-4 nm/s,and the peak displacement range is about 200.0-0.2 nm;②The equivalent magnitude of the P-wave from the airgun source with a total capacity of 8,000 in 3 is 0.181-0.760,and the equivalent magnitude of the S-wave is 0.294-0.832.By contrast,the equivalent magnitude of the P-wave from the airgun source with a total capacity of 12,000 in 3 is 0.533-0.896,and the equivalent magnitude of the S-wave is 0.611-0.946.The S-wave energy is greater than the P-wave energy,and the excitation efficiency varies greatly with different excitation environment;③The peak velocity increases with the equivalent magnitude,and decreases with the epicentral distance.The vertical component of the P-wave peak velocity is the largest among those three components,while the S-wave has the smallest vertical component and similar horizontal components.Hence,our research can provide an important basis for the quantitative judgment of the seismic wave propagation distance using the airgun and the design of the observation system in deep exploration or monitoring with airgun.
基金supported by the National Science Foundation of China (Nos.U1839208,42104118)the New Teacher Research Ability Improvement Project in China University of Geosciences (Beijing)。
文摘Most production methods of heavy oil involve thermal production.However,it is challenging to delineate the thermal-affected zone due to complex reservoir conditions.With steam injected,the heavy oil viscosity drops;the reservoir density and velocity decrease accordingly,causing changes to seismic impedance.Moreover,the oil-and-water viscosity ratio and permeability show the difference with changing temperature,indicating that the reservoir’s ability to transmit seismic waves would also be temperature-dependent.Therefore,the seismic responses and attenuation characteristics of the steam chamber can be helpful to monitor the steam-affected zone.We introduce an improved viscoelastic model to approximate the heavy oil reservoir during thermal production,and use the frequency-space domain finite difference algorithm to simulate the seismic wave-fields.Numerical results demonstrate that this model is applicable to a wide temperature range,and can effectively reveal the seismic characteristics of the steam chamber.Through analyzing the propagation differences of seismic waves under different temperatures,it is concluded that the attenuation coefficient,root-meansquare amplitude difference and amplitude ratio of PP-wave and PS-wave under different conditions can reveal the temperature variation in the steam chamber,with which it is possible to detect the steam chamber spatial distribution.
基金Projects(51308273,41372307,41272326) supported by the National Natural Science Foundation of ChinaProjects(2010(A)06-b) supported by Science and Technology Fund of Yunan Provincial Communication Department,China
文摘Based on some assumptions, the dynamic analysis model of anchorage system is established. The dynamic governing equation is expressed as finite difference format and programmed by using MATLAB language. Compared with theoretical method, the finite difference method has been verified to be feasible by a case study. It is found that under seismic loading, the dynamic response of anchorage system is synchronously fluctuated with the seismic vibration. The change of displacement amplitude of material points is slight, and comparatively speaking, the displacement amplitude of the outside point is a little larger than that of the inside point, which shows amplification effect of surface. While the axial force amplitude transforms considerably from the inside to the outside. It increases first and reaches the peak value in the intersection between the anchoring section and free section, then decreases slowly in the free section. When considering damping effect of anchorage system, the finite difference method can reflect the time attenuation characteristic better, and the calculating result would be safer and more reasonable than the dynamic steady-state theoretical method. What is more, the finite difference method can be applied to the dynamic response analysis of harmonic and seismic random vibration for all kinds of anchor, and hence has a broad application prospect.
