Integration of water, fertilizer and pesticide is the final stage of agricultural development, which improves the utilization efficiency of water, fertilizer and pesticide. Starting from the design and realization of ...Integration of water, fertilizer and pesticide is the final stage of agricultural development, which improves the utilization efficiency of water, fertilizer and pesticide. Starting from the design and realization of water, fertilizer and pesticide integrated automatic control device, the paper discusses selection and application of fertilizer pesticides, use procedure, water, fertilizer and pesticide saving effect and receptive crowd in the application process of modern planting industry, so as to provide the basis for promotion and popularization of water, fertilizer and pesticide integration.展开更多
Considering the problem of too large area the shading disc covered,complex shadow band coefficients and too big diffuse radiation measurement bias,an automatic shading device for diffuse radiometer is designed and rea...Considering the problem of too large area the shading disc covered,complex shadow band coefficients and too big diffuse radiation measurement bias,an automatic shading device for diffuse radiometer is designed and realized. Set a shading ball on the automatic sun tracker,drive linkage parallelogram structure with the declination axis arm,the shading ball can rotate synchronously with the motion of the sun and shade beam radiation measured with pyranometer,thus shading beam radiation and measuring diffuse radiation can be realized automatically. The comparison test results show that the automatic shading device can realize diffuse radiation measurement automatically,the accuracy of diffuse radiation readings can get a 18. 7% improvement compared with traditional measure system,greatly improves the reliability and accuracy of the diffuse radiation measurement.展开更多
To increase the machine accuracy by improving the stiffness of bearings,a preload was applied to bearings.A variable preload technology was necessary to perform machining processes in both low and high speed regions.A...To increase the machine accuracy by improving the stiffness of bearings,a preload was applied to bearings.A variable preload technology was necessary to perform machining processes in both low and high speed regions.An automatic variable preload device was fabricated using an eccentric mass.By installing the fabricated device on a spindle,the effect of the automatic variable preload device on the performance of the spindle was analyzed.In the results of the vibration measurement of the spindle,the vibration is increased by 20%-37% according to measurement points at the maximum rotation speed of 5 000 r/min.And,in the results of the noise measurement of the spindle,the spindle rotation speed is increased by about 1.9% and 1.5% at the front and side of the spindle,respectively.Based on the results of this analysis,an improved method that reduces such effects on the performance of the spindle is proposed.展开更多
Heavy metals in water can be deposited on graphite flakes,which can be used as an enrichment method for laser-induced breakdown spectroscopy(LIBS) and is studied in this paper.The graphite samples were prepared with a...Heavy metals in water can be deposited on graphite flakes,which can be used as an enrichment method for laser-induced breakdown spectroscopy(LIBS) and is studied in this paper.The graphite samples were prepared with an automatic device,which was composed of a loading and unloading module,a quantitatively adding solution module,a rapid heating and drying module and a precise rotating module.The experimental results showed that the sample preparation methods had no significant effect on sample distribution and the LIBS signal accumulated in 20 pulses was stable and repeatable.With an increasing amount of the sample solution on the graphite flake,the peak intensity at Cu Ⅰ 324.75 nm accorded with the exponential function with a correlation coefficient of 0.9963 and the background intensity remained unchanged.The limit of detection(LOD) was calculated through linear fitting of the peak intensity versus the concentration.The LOD decreased rapidly with an increasing amount of sample solution until the amount exceeded 20 mL and the correlation coefficient of exponential function fitting was 0.991.The LOD of Pb,Ni,Cd,Cr and Zn after evaporating different amounts of sample solution on the graphite flakes was measured and the variation tendency of their LOD with sample solution amounts was similar to the tendency for Cu.The experimental data and conclusions could provide a reference for automatic sample preparation and heavy metal in situ detection.展开更多
In this paper,we propose a fully Soft Bionic Grasping Device(SBGD),which has advantages in automatically adjusting the grasping range,variable stiffness,and controllable bending shape.This device consists of soft grip...In this paper,we propose a fully Soft Bionic Grasping Device(SBGD),which has advantages in automatically adjusting the grasping range,variable stiffness,and controllable bending shape.This device consists of soft gripper structures and a soft bionic bracket structure.We adopt the local thin-walled design in the soft gripper structures.This design improves the grippers’bending efficiency,and imitate human finger’s segmental bending function.In addition,this work also proposes a pneumatic soft bionic bracket structure,which not only can fix grippers,but also can automatically adjust the grasping space by imitating the human adjacent fingers’opening and closing movements.Due to the above advantages,the SBGD can grasp larger or smaller objects than the regular grasping devices.Particularly,to grasp small objects reliably,we further present a new Pinching Grasping(PG)method.The great performance of the fully SBGD is verified by experiments.This work will promote innovative development of the soft bionic grasping robots,and greatly meet the applications of dexterous grasping multi-size and multi-shape objects.展开更多
The principle of an automatic piecing device is presented, and the mathematic model of a specific combined mechanism of the automatic piecing device is analysed. The kinematics and dynamics equation of the combined me...The principle of an automatic piecing device is presented, and the mathematic model of a specific combined mechanism of the automatic piecing device is analysed. The kinematics and dynamics equation of the combined mechanism is established on the basis of the mathematic model. By the virtual prototype technology, the motion of this mechanism is simulated, whose result is post-processed by ADAMS. To improve the output motion, according to the simulation output and automatic piecing device's practical working condition, the optimisation of the cam mechanism is carried out by finite difference method. The simulation result of this combined mechanism turns out in accordance with its theoretical analysis of virtual prototype in this research, which, therefore, lays a principle basis for the further study of automatic piecing device.展开更多
在电子电路板制造行业,部分非标异性元件需要人工完成供料工序,再对接快速贴片机(Surface Mount Technology,SMT)完成整个生产工序,效率低下,无法满足电子产品组装行业的发展需求。为此设计了一种基于单片机控制的散料异形件供料器,包括...在电子电路板制造行业,部分非标异性元件需要人工完成供料工序,再对接快速贴片机(Surface Mount Technology,SMT)完成整个生产工序,效率低下,无法满足电子产品组装行业的发展需求。为此设计了一种基于单片机控制的散料异形件供料器,包括2套振动装置和直线导轨,振动装置呈螺旋形上升与直线轨道连接,2个直线导轨并行工作,直线振动器可使导轨部件振动使导槽内的散料移动,当散料移动至导槽的末端时,插件机吸夹嘴定点取料从而进行自动贴插件。与传统的手工贴插件相比,散料经本装置供料后,自动贴装品质更加得到保证。实践结果表明,该装置兼容现有的SMT设备及插件机设备,实现了供料器的全自动工作,提高了生产效率;所需员工从5人减少至1人,生产节拍从5 s/件降低至1 s/件,次品率从3‰大幅度下降至1‰。展开更多
基金Supported by Science and Technology Program of Guangxi Province(GK AD19245169,GK AD18281072,GK AA17202037,GK AB16380164)。
文摘Integration of water, fertilizer and pesticide is the final stage of agricultural development, which improves the utilization efficiency of water, fertilizer and pesticide. Starting from the design and realization of water, fertilizer and pesticide integrated automatic control device, the paper discusses selection and application of fertilizer pesticides, use procedure, water, fertilizer and pesticide saving effect and receptive crowd in the application process of modern planting industry, so as to provide the basis for promotion and popularization of water, fertilizer and pesticide integration.
基金supported by public sector ( meteorology ) research projects: meteorological sensors development for solar energy resources observations ( GYHY201006043 )
文摘Considering the problem of too large area the shading disc covered,complex shadow band coefficients and too big diffuse radiation measurement bias,an automatic shading device for diffuse radiometer is designed and realized. Set a shading ball on the automatic sun tracker,drive linkage parallelogram structure with the declination axis arm,the shading ball can rotate synchronously with the motion of the sun and shade beam radiation measured with pyranometer,thus shading beam radiation and measuring diffuse radiation can be realized automatically. The comparison test results show that the automatic shading device can realize diffuse radiation measurement automatically,the accuracy of diffuse radiation readings can get a 18. 7% improvement compared with traditional measure system,greatly improves the reliability and accuracy of the diffuse radiation measurement.
基金Project(2011-0027035) supported by the Basic Science Research Program through the National Research Foundation of Korea (NRF)funded by the Ministry of Education,Science and Technology,Korea
文摘To increase the machine accuracy by improving the stiffness of bearings,a preload was applied to bearings.A variable preload technology was necessary to perform machining processes in both low and high speed regions.An automatic variable preload device was fabricated using an eccentric mass.By installing the fabricated device on a spindle,the effect of the automatic variable preload device on the performance of the spindle was analyzed.In the results of the vibration measurement of the spindle,the vibration is increased by 20%-37% according to measurement points at the maximum rotation speed of 5 000 r/min.And,in the results of the noise measurement of the spindle,the spindle rotation speed is increased by about 1.9% and 1.5% at the front and side of the spindle,respectively.Based on the results of this analysis,an improved method that reduces such effects on the performance of the spindle is proposed.
基金supported by National Natural Science Foundation of China(No.60908018)National High Technology Research and Development Program of China(No.2013AA065502)Anhui Province Outstanding Youth Science Fund of China(No.1108085J19)
文摘Heavy metals in water can be deposited on graphite flakes,which can be used as an enrichment method for laser-induced breakdown spectroscopy(LIBS) and is studied in this paper.The graphite samples were prepared with an automatic device,which was composed of a loading and unloading module,a quantitatively adding solution module,a rapid heating and drying module and a precise rotating module.The experimental results showed that the sample preparation methods had no significant effect on sample distribution and the LIBS signal accumulated in 20 pulses was stable and repeatable.With an increasing amount of the sample solution on the graphite flake,the peak intensity at Cu Ⅰ 324.75 nm accorded with the exponential function with a correlation coefficient of 0.9963 and the background intensity remained unchanged.The limit of detection(LOD) was calculated through linear fitting of the peak intensity versus the concentration.The LOD decreased rapidly with an increasing amount of sample solution until the amount exceeded 20 mL and the correlation coefficient of exponential function fitting was 0.991.The LOD of Pb,Ni,Cd,Cr and Zn after evaporating different amounts of sample solution on the graphite flakes was measured and the variation tendency of their LOD with sample solution amounts was similar to the tendency for Cu.The experimental data and conclusions could provide a reference for automatic sample preparation and heavy metal in situ detection.
基金This work was funded by the National Natural Science Foundation of Chinaunder Grant 62073305the Fundamental Research Funds for the Central Universities,China University of Geosciences(Wuhan)(Nos.CUG170610 and CUGGC02).
文摘In this paper,we propose a fully Soft Bionic Grasping Device(SBGD),which has advantages in automatically adjusting the grasping range,variable stiffness,and controllable bending shape.This device consists of soft gripper structures and a soft bionic bracket structure.We adopt the local thin-walled design in the soft gripper structures.This design improves the grippers’bending efficiency,and imitate human finger’s segmental bending function.In addition,this work also proposes a pneumatic soft bionic bracket structure,which not only can fix grippers,but also can automatically adjust the grasping space by imitating the human adjacent fingers’opening and closing movements.Due to the above advantages,the SBGD can grasp larger or smaller objects than the regular grasping devices.Particularly,to grasp small objects reliably,we further present a new Pinching Grasping(PG)method.The great performance of the fully SBGD is verified by experiments.This work will promote innovative development of the soft bionic grasping robots,and greatly meet the applications of dexterous grasping multi-size and multi-shape objects.
文摘The principle of an automatic piecing device is presented, and the mathematic model of a specific combined mechanism of the automatic piecing device is analysed. The kinematics and dynamics equation of the combined mechanism is established on the basis of the mathematic model. By the virtual prototype technology, the motion of this mechanism is simulated, whose result is post-processed by ADAMS. To improve the output motion, according to the simulation output and automatic piecing device's practical working condition, the optimisation of the cam mechanism is carried out by finite difference method. The simulation result of this combined mechanism turns out in accordance with its theoretical analysis of virtual prototype in this research, which, therefore, lays a principle basis for the further study of automatic piecing device.
文摘在电子电路板制造行业,部分非标异性元件需要人工完成供料工序,再对接快速贴片机(Surface Mount Technology,SMT)完成整个生产工序,效率低下,无法满足电子产品组装行业的发展需求。为此设计了一种基于单片机控制的散料异形件供料器,包括2套振动装置和直线导轨,振动装置呈螺旋形上升与直线轨道连接,2个直线导轨并行工作,直线振动器可使导轨部件振动使导槽内的散料移动,当散料移动至导槽的末端时,插件机吸夹嘴定点取料从而进行自动贴插件。与传统的手工贴插件相比,散料经本装置供料后,自动贴装品质更加得到保证。实践结果表明,该装置兼容现有的SMT设备及插件机设备,实现了供料器的全自动工作,提高了生产效率;所需员工从5人减少至1人,生产节拍从5 s/件降低至1 s/件,次品率从3‰大幅度下降至1‰。
