This paper presents a micromechanics-based Cosserat continuum model for microstructured granular materials.By utilizing this model,the macroscopic constitutive parameters of granular materials with different microstru...This paper presents a micromechanics-based Cosserat continuum model for microstructured granular materials.By utilizing this model,the macroscopic constitutive parameters of granular materials with different microstructures are expressed as sums of microstructural information.The microstructures under consideration can be classified into three categories:a medium-dense microstructure,a dense microstructure consisting of one-sized particles,and a dense microstructure consisting of two-sized particles.Subsequently,the Cosserat elastoplastic model,along with its finite element formulation,is derived using the extended Drucker-Prager yield criteria.To investigate failure behaviors,numerical simulations of granular materials with different microstructures are conducted using the ABAQUS User Element(UEL)interface.It demonstrates the capacity of the proposed model to simulate the phenomena of strain-softening and strain localization.The study investigates the influence of microscopic parameters,including contact stiffness parameters and characteristic length,on the failure behaviors of granularmaterials withmicrostructures.Additionally,the study examines themesh independence of the presented model and establishes its relationship with the characteristic length.A comparison is made between finite element simulations and discrete element simulations for a medium-dense microstructure,revealing a good agreement in results during the elastic stage.Somemacroscopic parameters describing plasticity are shown to be partially related to microscopic factors such as confining pressure and size of the representative volume element.展开更多
High-energy gas fracturing of shale is a novel,high efficacy and eco-friendly mining technique,which is a typical dynamic perturbing behavior.To effectively extract shale gas,it is important to understand the dynamic ...High-energy gas fracturing of shale is a novel,high efficacy and eco-friendly mining technique,which is a typical dynamic perturbing behavior.To effectively extract shale gas,it is important to understand the dynamic mechanical properties of shale.Dynamic experiments on shale subjected to true triaxial compression at different strain rates are first conducted in this research.The dynamic stress-strain curves,peak strain,peak stress and failure modes of shale are investigated.The results of the study indicate that the intermediate principal stress and the minor principal stress have the significant influence on the dynamic mechanical behaviors,although this effect decreases as the strain rate increases.The characteristics of compression-shear failure primarily occur in shale subjected to triaxial compression at high strain rates,which distinguishes it from the fragmentation characteristics observed in shale under dynamic uniaxial compression.Additionally,a numerical three-dimensional Split Hopkinson Pressure Bar(3D-SHPB),which is established by coupling PFC3D and FLAC3D methods,is validated to replicate the laboratory characteristics of shale.The dynamic mechanical characteristics of shale subjected to different confining stresses are systematically investigated by the coupling PFC3D and FLAC3D method.The numerical results are in good agreement with the experimental data.展开更多
School-based universal screening for behavioral/emotional risk is a necessary first step to providing services in an educational setting for students with emotional and behavioral disorders (EBDs). Psychometric proper...School-based universal screening for behavioral/emotional risk is a necessary first step to providing services in an educational setting for students with emotional and behavioral disorders (EBDs). Psychometric properties are critical to making decisions about choosing a screening instrument. The purpose of the present study was to examine the psychometric properties of the student risk screening scale for internalizing and externalizing behaviors (SRSS-IE). Participants included 3145 students and their teachers. Item-level analyses of the current sample supported the retention of all items. The internal consistency of the SRSS items ranged from 0.83 to 0.85. Convergent validity between the SRSS-IE and a well-established screening tool, the strength and difficulties questionnaire (SDQ), was found for the total score (r = 0.70). Additionally, the results of this study demonstrate strong social validity, suggesting the SRSS-IE to be a useful and functional screening tool. We conclude that the SRSS-IE is a valid and reliable instrument for assessing the level of emotional and behavioral difficulties among elementary students.展开更多
The warm and ice-rich frozen soil is characterized by high unfrozen water content, low shear strength and large compressibility, which is unreliable to meet the stability requirements of engineering infrastructures an...The warm and ice-rich frozen soil is characterized by high unfrozen water content, low shear strength and large compressibility, which is unreliable to meet the stability requirements of engineering infrastructures and foundations in permafrost regions. In this study, a novel approach for stabilizing the warm and ice-rich frozen soil with sulphoaluminate cement was proposed based on chemical stabilization. The mechanical behaviors of the stabilized soil, such as strength and stress-strain relationship, were investigated through a series of triaxial compression tests conducted at -1.0℃, and the mechanism of strength variations of the stabilized soil was also explained based on scanning electron microscope test. The investigations indicated that the strength of stabilized soil to resist failure has been improved, and the linear Mohr-Coulomb criteria can accurately reflect the shear strength of stabilized soil under various applied confining pressure. The increase in both curing age and cement mixing ratio were favorable to the growth of cohesion and internal friction angle. More importantly, the strength improvement mechanism of the stabilized soil is attributed to the formation of structural skeleton and the generation of cementitious hydration products within itself. Therefore, the investigations conducted in this study provide valuable references for chemical stabilization of warm and ice-rich frozen ground, thereby providing a basis for in-situ ground improvement for reinforcing warm and ice-rich permafrost foundations by soil-cement column installation.展开更多
A series of undrained triaxial tests was conducted to investigate the effect of crushed mudstone with the immersion-induced degradation on the liquefaction and post-liquefaction properties,and the undrained shearing b...A series of undrained triaxial tests was conducted to investigate the effect of crushed mudstone with the immersion-induced degradation on the liquefaction and post-liquefaction properties,and the undrained shearing behavior without precedent cyclic-loading histories of sands containing crushed mudstone.The tested materials with a main particle diameter of 2-0.85 mm were prepared by mixing sands and crushed mudstone to reach the prescribed mudstone content defined by dry mass ranging from 0% to 50%.The mixtures were subjected to immersion under a certain stress level and were subsequently tested.In addition,one-dimensional compression tests were also supplementally performed to visually observe the immersion-induced degradation of crushed mudstone.The test results mainly showed that: (1) the liquefaction resistance,the post-liquefaction undrained strength,and the undrained strength without a precedent cyclic-loading history decreased significantly with increasing mudstone content,M c ,up to 20%;(2) even a small amount of crushed mudstone affected these strengths;(3) the above-mentioned large reductions in the strengths were attributed to the immersion-induced degradation of crushed mudstone;(4) at M c > 20%,the liquefaction resistance increased while the significant increase in the undrained static strengths with and without precedent cyclic-loading histories was not observed;and (5) the increase in the liquefaction resistance at M c > 20% may have been attributed to both the gradual increase in the plasticity and the formation of the soil aggregates among deteriorated crushed mudstone,while the increase in the specimen density did not play an important role in such behavior.展开更多
The Ti-5Al-2Sn-4Zr-4Mo-2Cr-1Fe(β-CEZ)alloy is considered as a potential structural material in the aviation industry due to its outstanding strength and corrosion resistance.Electrochemical machining(ECM)is an effici...The Ti-5Al-2Sn-4Zr-4Mo-2Cr-1Fe(β-CEZ)alloy is considered as a potential structural material in the aviation industry due to its outstanding strength and corrosion resistance.Electrochemical machining(ECM)is an efficient and low-cost technology for manufacturing theβ-CEZ alloy.In ECM,the machining parameter selection and tool design are based on the electrochemical dissolution behavior of the materials.In this study,the electrochemical dissolution behaviors of theβ-CEZ and Ti-6Al-4V(TC4)alloys in NaNO3solution are discussed.The open circuit potential(OCP),Tafel polarization,potentiodynamic polarization,electrochemical impedance spectroscopy(EIS),and current efficiency curves of theβ-CEZ and TC4 alloys are analyzed.The results show that,compared to the TC4 alloy,the passivation film structure is denser and the charge transfer resistance in the dissolution process is greater for theβ-CEZ alloy.Moreover,the dissolved surface morphology of the two titanium-based alloys under different current densities are analyzed.Under low current densities,theβ-CEZ alloy surface comprises dissolution pits and dissolved products,while the TC4 alloy surface comprises a porous honeycomb structure.Under high current densities,the surface waviness of both the alloys improves and the TC4 alloy surface is flatter and smoother than theβ-CEZ alloy surface.Finally,the electrochemical dissolution models ofβ-CEZ and TC4 alloys are proposed.展开更多
The snap-through behaviors and nonlinear vibrations are investigated for a bistable composite laminated cantilever shell subjected to transversal foundation excitation based on experimental and theoretical approaches....The snap-through behaviors and nonlinear vibrations are investigated for a bistable composite laminated cantilever shell subjected to transversal foundation excitation based on experimental and theoretical approaches.An improved experimental specimen is designed in order to satisfy the cantilever support boundary condition,which is composed of an asymmetric region and a symmetric region.The symmetric region of the experimental specimen is entirely clamped,which is rigidly connected to an electromagnetic shaker,while the asymmetric region remains free of constraint.Different motion paths are realized for the bistable cantilever shell by changing the input signal levels of the electromagnetic shaker,and the displacement responses of the shell are collected by the laser displacement sensors.The numerical simulation is conducted based on the established theoretical model of the bistable composite laminated cantilever shell,and an off-axis three-dimensional dynamic snap-through domain is obtained.The numerical solutions are in good agreement with the experimental results.The nonlinear stiffness characteristics,dynamic snap-through domain,and chaos and bifurcation behaviors of the shell are quantitatively analyzed.Due to the asymmetry of the boundary condition and the shell,the upper stable-state of the shell exhibits an obvious soft spring stiffness characteristic,and the lower stable-state shows a linear stiffness characteristic of the shell.展开更多
Material removal in the cutting process is regarded as a friction system with multiple input and output variables.The complexity of the cutting friction system is caused by the extreme conditions existing on the tool...Material removal in the cutting process is regarded as a friction system with multiple input and output variables.The complexity of the cutting friction system is caused by the extreme conditions existing on the tool–chip and tool–workpiece interfaces.The critical issue is significant to use knowledge of cutting friction behaviors to guide researchers and industrial manufacturing engineers in designing rational cutting processes to reduce tool wear and improve surface quality.This review focuses on the state of the art of research on friction behaviors in cutting procedures as well as future perspectives.First,the cutting friction phenomena under extreme conditions,such as high temperature,large strain/strain rates,sticking–sliding contact states,and diverse cutting conditions are analyzed.Second,the theoretical models of cutting friction behaviors and the application of simulation technology are discussed.Third,the factors that affect friction behaviors are analyzed,including material matching,cutting parameters,lubrication/cooling conditions,micro/nano surface textures,and tool coatings.Then,the consequences of the cutting friction phenomena,including tool wear patterns,tool life,chip formation,and the machined surface are analyzed.Finally,the research limitations and future work for cutting friction behaviors are discussed.This review contributes to the understanding of cutting friction behaviors and the development of high-quality cutting technology.展开更多
Emergency decision-making problems usually involve many experts with different professional backgrounds and concerns,leading to non-cooperative behaviors during the consensus-reaching process.Many studies on noncooper...Emergency decision-making problems usually involve many experts with different professional backgrounds and concerns,leading to non-cooperative behaviors during the consensus-reaching process.Many studies on noncooperative behavior management assumed that the maximumdegree of cooperation of experts is to totally accept the revisions suggested by the moderator,which restricted individuals with altruistic behaviors to make more contributions in the agreement-reaching process.In addition,when grouping a large group into subgroups by clustering methods,existing studies were based on the similarity of evaluation values or trust relationships among experts separately but did not consider them simultaneously.In this study,we introduce a clustering method considering the similarity of evaluation values and the trust relations of experts and then develop a consensusmodel taking into account the altruistic behaviors of experts.First,we cluster experts into subgroups by a constrained Kmeans clustering algorithm according to the opinion similarity and trust relationship of experts.Then,we calculate the weights of experts and clusters based on the centrality degrees of experts.Next,to enhance the quality of consensus reaching,we identify three kinds of non-cooperative behaviors and propose corresponding feedback mechanisms relying on the altruistic behaviors of experts.A numerical example is given to show the effectiveness and practicality of the proposed method in emergency decision-making.The study finds that integrating altruistic behavior analysis in group decision-making can safeguard the interests of experts and ensure the integrity of decision-making information.展开更多
Tunnel-type anchorages(TTAs)installed in human gathering areas are characterized by a shallow burial depth,and in many instances,they utilize soft rock as the bearing stratum.However,the stability control measures and...Tunnel-type anchorages(TTAs)installed in human gathering areas are characterized by a shallow burial depth,and in many instances,they utilize soft rock as the bearing stratum.However,the stability control measures and the principle of shallow TTAs in soft rock have not been fully studied.Hence,a structure suitable for improving the stability of shallow TTAs in soft rock strata,named the anti-pull tie(APT),was added to the floor of the back face.Physical tests and numerical models were established to study the influence of the APT on the load transfer of TTAs,the mechanical response of the surrounding rock,the stress distribution of the interface,and the failure model.The mechanical characteristics of APTs were also studied.The results show that the ultimate bearing capacity of TTAs with an APT is increased by approximately 11.8%,as compared to the TTAs without an APT.Also,the bearing capacity of TTAs increases approximately linearly with increasing height,width,length,and quantity of APTs,and decreases approximately linearly with increasing distance from the back face and slope angle of the tie slope.The normal squeezing between the tie slope and the surrounding rock increases the shear resistance of the interface and expands the range of the surrounding rock participating in bearing sharing.Both tension and compression zones exist in the APT during loading.The tension zone extends from the tie toe to the tie bottom along the tie slope.The range of the tie body tension zone constantly expands to the deep part of the APT with an increasing load.The peak tensile stress value is located at the tie toe.The distribution of compressive stress in the tie body is the largest at the tie top,followed by the tie slope,and then the tie bottom.展开更多
CO_(2)dissolution into an aqueous phase and water evaporation into a gaseous phase takes place during CO_(2)injection into an oil reservoir.This study aims to evaluate the phase behaviors of the oil-gas-water system i...CO_(2)dissolution into an aqueous phase and water evaporation into a gaseous phase takes place during CO_(2)injection into an oil reservoir.This study aims to evaluate the phase behaviors of the oil-gas-water system in the displacement of crude oil by CO_(2).The composition of the JL oilfield in the northeast of China is taken as an example.The flash calculation of the oil-gas-water system was performed,based on the method presented by Li and Nghiem.The research results show that CO_(2)dissolution in the aqueous phase declines as the NaCl concentration in formation water rises.CO_(2)injection is beneficial for the evaporation of formation water.The NaCl concentration in formation water has little effect on water evaporation and dissolved-gas escape.When the injection-gas mole fraction of CO_(2)is 0.5,CO_(2)injection can reverse the phase behavior of the petroleum mixture and the oil-gas system is converted to a pure gas-condensate system.For CO_(2)injection,water vapor has little effect on the miscibility of multiple contacts,but can reduce the miscibility of the first contact.展开更多
To better understand the benzene alkylation with chloroaluminate ionic liquids(ILs) as catalyst, the interfacial properties between the benzene/butene binary reactants and chloroaluminate ILs with varying cation alkyl...To better understand the benzene alkylation with chloroaluminate ionic liquids(ILs) as catalyst, the interfacial properties between the benzene/butene binary reactants and chloroaluminate ILs with varying cation alkyl chain length and different anions were investigated using molecular dynamics(MD) simulations. The results indicate that ILs can obviously improve the interfacial width, solubility and diffusion of reactants compared to H_(2)SO_(4). The longer alkyl chains of cations present a density enrichment at the interface and protrude into the binary reactants phase. Furthermore, the ILs consisting of 1-octyl-3-methylimidazolium cations([Omim]^(+)) and the stronger acidity heptachlorodialuminate anions([Al_(2)Cl_(7)]^(-)) are more beneficial to promote the interfacial width and facilitate the dissolution and diffusion of benzene in both the IL bulk and the interfacial region in comparison to the ones with shorter alkyl chains cations and weaker acidity anions. The information gives us a better guideline for the design of ILs for benzene alkylation.展开更多
The present study aims at the numerical simulations of the melting process of cerium oxide particles in RF thermal plasma.The physical model and the calculating method were described firstly;the interaction between ce...The present study aims at the numerical simulations of the melting process of cerium oxide particles in RF thermal plasma.The physical model and the calculating method were described firstly;the interaction between cerium oxide particles and plasma was analyzed;specific attention was given to the effects of particle initial size,injection velocity on the particle melting and trajectory in plasma.The influence of the temperature field and velocity field distribution of the plasma around the particle trajectory on the melting effect is analyzed,and the relationship between the heat absorption efficiency of the particles and the particle size reduction process is further determined.It is also found that there exists an optimal particle initial injection velocity which led to a more concentrated final particle size distribution and a more significant reduction of particle size.The results could provide effective guidance for understanding the plasma spheroidization process of uranium dioxide and cerium dioxide powder particles.展开更多
For a special geological structure of columnar jointed rock mass(CJRM),its mechanical properties are strongly affected by the columnar joints.To describe the fracture behaviors of CJRM using the basic theories of inte...For a special geological structure of columnar jointed rock mass(CJRM),its mechanical properties are strongly affected by the columnar joints.To describe the fracture behaviors of CJRM using the basic theories of interface mechanics for composite materials,the interface stresses of the vertical and horizontal joints,which are the two primary joints in the CJRM under triaxial compression,are studied,and their mathematical expressions are derived based on the superposition principle.Based on the obtained interface stresses of the vertical and horizontal joints in the CJRM,the crack initiation of the joint interface in the CJRM is studied using the maximum circumferential stress theory in fracture mechanics.Moreover,based on this investigation,the fracture behaviors of CJRM are analyzed.According to the results of similar material physical model tests for the CJRM,the theoretical study is verified.Finally,the influence of the mechanical parameters of the CJRM on the joint interface stress is discussed comprehensively.展开更多
Ethnic Tibetans(ETs)typically reside in the remote plateaus of China and possess strong cultural and spiritual values.Their financial decision-making is influenced by economic and physical factors,unique culture,socia...Ethnic Tibetans(ETs)typically reside in the remote plateaus of China and possess strong cultural and spiritual values.Their financial decision-making is influenced by economic and physical factors,unique culture,social norms,and psychological motivators.We conducted an in-person survey of 480 randomly selected ET households across four provinces in rural China.The survey data was analyzed using three different econometric models—probit,ordered probit,and ranked ordered logit—to examine the choice of borrowing from formal or informal credit sources,the number of sources borrowed from,and repayment priority.Our findings indicate that mental accounting plays a significant role in the financial decision-making process of ET households.Additionally,we find that the informal credit source is strongly associated with the financial decisions of ET households.The majority of loans from formal financial institutions are used to meet daily needs,as opposed to purchasing productive inputs.Our results also suggest that strong social relationships and religious beliefs prevent households from defaulting,and that loans from formal financial sources receive repayment priority.China would benefit from promoting inclusive finance and encouraging the adoption of improved agricultural practices to support the prosperity of ET and other minority communities.展开更多
The implementation of China’s three-child fertility policy has led to a notable increase in multiple-child families.Notably,firstborn children experience a significant transition from being an only child to a non-only ...The implementation of China’s three-child fertility policy has led to a notable increase in multiple-child families.Notably,firstborn children experience a significant transition from being an only child to a non-only child.This transition is associated with problematic behaviors,affecting their social adjustment,sibling relationships,and family harmony.Although several studies have examined the relationship between parent-child attachment and problem behaviors exhibited byfirstborn children during family transitions,thefindings have been inconsistent.Hence,a meta-analytic study was undertaken to elucidate the inconsistencies in this relationship and explore the moderating factors that may contribute to these discrepancies.Using a systematic literature retrieval and screening method,12 effect sizes were derived from the 10 eligible articles,encompassing a sample size of 5319.The meta-analysis demonstrated a low negative association between parent-child secure attachment and problem behaviors exhibited byfirstborn children during family transitions.Furthermore,the present study investigates potential moderator factors,such as children’s age and geographic region,to gain a more nuanced understanding of the relationship.Consequently,the establishment of parent-child attachment relationships has the potential to mitigate problem behaviors observed infirst-born children during family transitions.The implications of thesefindings indicate that parents can nurture secure attachment bonds with their children by demonstrating sensitive responsiveness,employing positive parenting practices,and fostering emotional availability.These efforts contribute to the cultivation of secure internal working models and positive behavioral manifestations withinfirst-born children,which in turn affect their relationships with siblings.展开更多
From the perspective of regulatory focus theory,the influencing mechanism of pro-environmental behaviors(PEBs)in the private domain on behaviors in the public domain were analyzed by revealing the mediating ef‐fect o...From the perspective of regulatory focus theory,the influencing mechanism of pro-environmental behaviors(PEBs)in the private domain on behaviors in the public domain were analyzed by revealing the mediating ef‐fect of the status quo maintenance and the moderating effect of the prevention focus orientation.The study re‐sults show that PEBs in the private domain significantly promote individuals’PEBs in the public domain.The status quo maintenance partially mediates the relationship between PEBs in the private and public domains.Specifically,individuals with a high-level prevention focus orientation strengthen the relationship between the PEBs in the private domain and the status quo maintenance,and that of the PEBs in the public domain.There‐fore,individuals with a high-level prevention focus will more likely engage in subsequent PEBs in the public domain after their initial PEBs in the private domain due to their increased status quo maintenance degree.Policymakers and practitioners should pay attention to the prevention-repetition effect and use the PEBs in the private domain to promote those in the public domain.展开更多
The fracturing process of sandstone is inherently complex due to its loose internal structure and deformation adaptability.Liquid nitrogen pre-injection has emerged as a promising approach to damage reservoir rocks,ef...The fracturing process of sandstone is inherently complex due to its loose internal structure and deformation adaptability.Liquid nitrogen pre-injection has emerged as a promising approach to damage reservoir rocks,effectively reducing fracture pressure and establishing intricate fracture networks,thus offering a potential solution for reservoir reconstruction.To unravel the fundamental mechanisms governing sandstone fracturing behaviors following liquid nitrogen pre-injection,sandstone fracturing experiments were conducted under varying durations of liquid nitrogen injection,rock temperature,and in-situ stress conditions.The experiments showcased the evolution of injection pressure and fracture characteristics under different testing conditions,complemented by electron microscope analysis to elucidate the factors driving the complex fracture characteristics of sandstone.The findings revealed a significant decrease in fracture pressure after liquid nitrogen pre-injection,accompanied by a notable increase in the complexity of the fracture network and the roughness of the fracture surface.Moreover,prolonging the duration of liquid nitrogen injection and elevating reservoir temperature further contributed to reducing fracture pressure,consequently enhancing fracture complexity and surface roughness.Conversely,the application of confining pressure amplified fracture pressure while intensifying the degree of fracturing.Notably,the investigation highlighted the increased presence of microcracks in sandstone resulting from liquid nitrogen preinjection,facilitating fluid diffusion during fracturing and yielding lower fracture pressures,thereby enhancing the effectiveness of sandstone reservoir reformation.The research results can provide theoretical guidance for geothermal reservoir reconstruction.展开更多
Existing simulations of terrorist attacks do not consider individual variations.To overcome this lim-itation,we propose a framework to model heterogeneous behavior of individuals during terrorist attacks.We constructe...Existing simulations of terrorist attacks do not consider individual variations.To overcome this lim-itation,we propose a framework to model heterogeneous behavior of individuals during terrorist attacks.We constructed an emotional model that integrated personality and visual perception for pedestrians.The emotional model was then integrated with pedestrian relationship networks to establish a decision-making model that sup-ported pedestrians’altruistic behaviors.A mapping model has been developed to correlate antisocial personality traits with attack strategies employed by terrorists.Experiments demonstrate that the proposed algorithm can generate practical heterogeneous behaviors that align with existing psychological research findings.展开更多
Blended teaching, which integrates the advantages of online and offline teaching, has become the main direction of higher education teaching reform. In the era of education big data, research on the online learners’ ...Blended teaching, which integrates the advantages of online and offline teaching, has become the main direction of higher education teaching reform. In the era of education big data, research on the online learners’ behavior based on data mining has attracted more and more attention from higher education researchers. However, in the field of foreign language teaching, research on the relationship between online learning behaviors and learning outcomes in the blended teaching mode is still at an early stage. Taking the course College English Listening in Zhejiang Yuexiu University (ZYU) as an example, this study conducted a comprehensive data analysis of online learning behaviors of 152 students of ZYU to explore the influence of online learning behaviors on learning outcomes in the blended teaching mode by utilizing Microsoft Excel and SPSS.20 statistic software. The result shows that the number of course login, the quantity and the quality of forum replies, the number of note submission, the quality of the notes, the average score of vocabulary tests, the number of the times of taking listening tests and the average score of listening tests are all significantly and positively correlated with students’ learning outcomes, while the study does not find a correlation between students’ learning outcomes and the number of the times of taking vocabulary tests, the total length of online learning and the length of video viewing. Based on the study results, implications are put forward to give reference for the teaching design and the management of the foreign language blended courses.展开更多
基金the National Natural Science Foundation of China through Contract/Grant Numbers 12002245,12172263 and 11772237Chongqing Jiaotong University through Contract/Grant Number F1220038.
文摘This paper presents a micromechanics-based Cosserat continuum model for microstructured granular materials.By utilizing this model,the macroscopic constitutive parameters of granular materials with different microstructures are expressed as sums of microstructural information.The microstructures under consideration can be classified into three categories:a medium-dense microstructure,a dense microstructure consisting of one-sized particles,and a dense microstructure consisting of two-sized particles.Subsequently,the Cosserat elastoplastic model,along with its finite element formulation,is derived using the extended Drucker-Prager yield criteria.To investigate failure behaviors,numerical simulations of granular materials with different microstructures are conducted using the ABAQUS User Element(UEL)interface.It demonstrates the capacity of the proposed model to simulate the phenomena of strain-softening and strain localization.The study investigates the influence of microscopic parameters,including contact stiffness parameters and characteristic length,on the failure behaviors of granularmaterials withmicrostructures.Additionally,the study examines themesh independence of the presented model and establishes its relationship with the characteristic length.A comparison is made between finite element simulations and discrete element simulations for a medium-dense microstructure,revealing a good agreement in results during the elastic stage.Somemacroscopic parameters describing plasticity are shown to be partially related to microscopic factors such as confining pressure and size of the representative volume element.
基金supported by the National Natural Science Foundation of China(Nos.51839009 and 52027814)the Natural Science Foundation of Hubei Province(No.2023AFB589).
文摘High-energy gas fracturing of shale is a novel,high efficacy and eco-friendly mining technique,which is a typical dynamic perturbing behavior.To effectively extract shale gas,it is important to understand the dynamic mechanical properties of shale.Dynamic experiments on shale subjected to true triaxial compression at different strain rates are first conducted in this research.The dynamic stress-strain curves,peak strain,peak stress and failure modes of shale are investigated.The results of the study indicate that the intermediate principal stress and the minor principal stress have the significant influence on the dynamic mechanical behaviors,although this effect decreases as the strain rate increases.The characteristics of compression-shear failure primarily occur in shale subjected to triaxial compression at high strain rates,which distinguishes it from the fragmentation characteristics observed in shale under dynamic uniaxial compression.Additionally,a numerical three-dimensional Split Hopkinson Pressure Bar(3D-SHPB),which is established by coupling PFC3D and FLAC3D methods,is validated to replicate the laboratory characteristics of shale.The dynamic mechanical characteristics of shale subjected to different confining stresses are systematically investigated by the coupling PFC3D and FLAC3D method.The numerical results are in good agreement with the experimental data.
文摘School-based universal screening for behavioral/emotional risk is a necessary first step to providing services in an educational setting for students with emotional and behavioral disorders (EBDs). Psychometric properties are critical to making decisions about choosing a screening instrument. The purpose of the present study was to examine the psychometric properties of the student risk screening scale for internalizing and externalizing behaviors (SRSS-IE). Participants included 3145 students and their teachers. Item-level analyses of the current sample supported the retention of all items. The internal consistency of the SRSS items ranged from 0.83 to 0.85. Convergent validity between the SRSS-IE and a well-established screening tool, the strength and difficulties questionnaire (SDQ), was found for the total score (r = 0.70). Additionally, the results of this study demonstrate strong social validity, suggesting the SRSS-IE to be a useful and functional screening tool. We conclude that the SRSS-IE is a valid and reliable instrument for assessing the level of emotional and behavioral difficulties among elementary students.
基金supported by the National Natural Science Foundation of China (No. 41471062, No. 41971085, No. 41971086)。
文摘The warm and ice-rich frozen soil is characterized by high unfrozen water content, low shear strength and large compressibility, which is unreliable to meet the stability requirements of engineering infrastructures and foundations in permafrost regions. In this study, a novel approach for stabilizing the warm and ice-rich frozen soil with sulphoaluminate cement was proposed based on chemical stabilization. The mechanical behaviors of the stabilized soil, such as strength and stress-strain relationship, were investigated through a series of triaxial compression tests conducted at -1.0℃, and the mechanism of strength variations of the stabilized soil was also explained based on scanning electron microscope test. The investigations indicated that the strength of stabilized soil to resist failure has been improved, and the linear Mohr-Coulomb criteria can accurately reflect the shear strength of stabilized soil under various applied confining pressure. The increase in both curing age and cement mixing ratio were favorable to the growth of cohesion and internal friction angle. More importantly, the strength improvement mechanism of the stabilized soil is attributed to the formation of structural skeleton and the generation of cementitious hydration products within itself. Therefore, the investigations conducted in this study provide valuable references for chemical stabilization of warm and ice-rich frozen ground, thereby providing a basis for in-situ ground improvement for reinforcing warm and ice-rich permafrost foundations by soil-cement column installation.
基金financially supported by JSPS KAKENHI Grant Number JP19K15083.
文摘A series of undrained triaxial tests was conducted to investigate the effect of crushed mudstone with the immersion-induced degradation on the liquefaction and post-liquefaction properties,and the undrained shearing behavior without precedent cyclic-loading histories of sands containing crushed mudstone.The tested materials with a main particle diameter of 2-0.85 mm were prepared by mixing sands and crushed mudstone to reach the prescribed mudstone content defined by dry mass ranging from 0% to 50%.The mixtures were subjected to immersion under a certain stress level and were subsequently tested.In addition,one-dimensional compression tests were also supplementally performed to visually observe the immersion-induced degradation of crushed mudstone.The test results mainly showed that: (1) the liquefaction resistance,the post-liquefaction undrained strength,and the undrained strength without a precedent cyclic-loading history decreased significantly with increasing mudstone content,M c ,up to 20%;(2) even a small amount of crushed mudstone affected these strengths;(3) the above-mentioned large reductions in the strengths were attributed to the immersion-induced degradation of crushed mudstone;(4) at M c > 20%,the liquefaction resistance increased while the significant increase in the undrained static strengths with and without precedent cyclic-loading histories was not observed;and (5) the increase in the liquefaction resistance at M c > 20% may have been attributed to both the gradual increase in the plasticity and the formation of the soil aggregates among deteriorated crushed mudstone,while the increase in the specimen density did not play an important role in such behavior.
基金supported by the National Natural Science Foundation of China(No.92160301)the Industrial Technology Development Program,China(No.JCKY2021605 B026)。
文摘The Ti-5Al-2Sn-4Zr-4Mo-2Cr-1Fe(β-CEZ)alloy is considered as a potential structural material in the aviation industry due to its outstanding strength and corrosion resistance.Electrochemical machining(ECM)is an efficient and low-cost technology for manufacturing theβ-CEZ alloy.In ECM,the machining parameter selection and tool design are based on the electrochemical dissolution behavior of the materials.In this study,the electrochemical dissolution behaviors of theβ-CEZ and Ti-6Al-4V(TC4)alloys in NaNO3solution are discussed.The open circuit potential(OCP),Tafel polarization,potentiodynamic polarization,electrochemical impedance spectroscopy(EIS),and current efficiency curves of theβ-CEZ and TC4 alloys are analyzed.The results show that,compared to the TC4 alloy,the passivation film structure is denser and the charge transfer resistance in the dissolution process is greater for theβ-CEZ alloy.Moreover,the dissolved surface morphology of the two titanium-based alloys under different current densities are analyzed.Under low current densities,theβ-CEZ alloy surface comprises dissolution pits and dissolved products,while the TC4 alloy surface comprises a porous honeycomb structure.Under high current densities,the surface waviness of both the alloys improves and the TC4 alloy surface is flatter and smoother than theβ-CEZ alloy surface.Finally,the electrochemical dissolution models ofβ-CEZ and TC4 alloys are proposed.
基金Project supported by the National Natural Science Foundation of China(Nos.11832002 and 12072201)。
文摘The snap-through behaviors and nonlinear vibrations are investigated for a bistable composite laminated cantilever shell subjected to transversal foundation excitation based on experimental and theoretical approaches.An improved experimental specimen is designed in order to satisfy the cantilever support boundary condition,which is composed of an asymmetric region and a symmetric region.The symmetric region of the experimental specimen is entirely clamped,which is rigidly connected to an electromagnetic shaker,while the asymmetric region remains free of constraint.Different motion paths are realized for the bistable cantilever shell by changing the input signal levels of the electromagnetic shaker,and the displacement responses of the shell are collected by the laser displacement sensors.The numerical simulation is conducted based on the established theoretical model of the bistable composite laminated cantilever shell,and an off-axis three-dimensional dynamic snap-through domain is obtained.The numerical solutions are in good agreement with the experimental results.The nonlinear stiffness characteristics,dynamic snap-through domain,and chaos and bifurcation behaviors of the shell are quantitatively analyzed.Due to the asymmetry of the boundary condition and the shell,the upper stable-state of the shell exhibits an obvious soft spring stiffness characteristic,and the lower stable-state shows a linear stiffness characteristic of the shell.
基金financial support from the National Key Research and Development Program of China (2019YFB2005401)National Natural Science Foundation of China (Nos. 91860207 and 52175420)+5 种基金Shandong Provincial Key Research and Development Program (Major Scientific and Technological Innovation Project)(No. 2020CXGC010204)Shandong Provincial Natural Science Foundation of China (2021JMRH0301 and2021JMRH0304)Taishan Scholar FoundationInternational Partnership Scheme of the Bureau of the International Scientific Cooperation of the Chinese Academy of Sciences(No. 181722KYSB20180015)Research and Innovation Office of The Hong Kong Polytechnic University (BBX5and BBX7)funding support to the State Key Laboratories in Hong Kong
文摘Material removal in the cutting process is regarded as a friction system with multiple input and output variables.The complexity of the cutting friction system is caused by the extreme conditions existing on the tool–chip and tool–workpiece interfaces.The critical issue is significant to use knowledge of cutting friction behaviors to guide researchers and industrial manufacturing engineers in designing rational cutting processes to reduce tool wear and improve surface quality.This review focuses on the state of the art of research on friction behaviors in cutting procedures as well as future perspectives.First,the cutting friction phenomena under extreme conditions,such as high temperature,large strain/strain rates,sticking–sliding contact states,and diverse cutting conditions are analyzed.Second,the theoretical models of cutting friction behaviors and the application of simulation technology are discussed.Third,the factors that affect friction behaviors are analyzed,including material matching,cutting parameters,lubrication/cooling conditions,micro/nano surface textures,and tool coatings.Then,the consequences of the cutting friction phenomena,including tool wear patterns,tool life,chip formation,and the machined surface are analyzed.Finally,the research limitations and future work for cutting friction behaviors are discussed.This review contributes to the understanding of cutting friction behaviors and the development of high-quality cutting technology.
基金supported by the National Natural Science Foundation of China (Nos.71771156,71971145,72171158).
文摘Emergency decision-making problems usually involve many experts with different professional backgrounds and concerns,leading to non-cooperative behaviors during the consensus-reaching process.Many studies on noncooperative behavior management assumed that the maximumdegree of cooperation of experts is to totally accept the revisions suggested by the moderator,which restricted individuals with altruistic behaviors to make more contributions in the agreement-reaching process.In addition,when grouping a large group into subgroups by clustering methods,existing studies were based on the similarity of evaluation values or trust relationships among experts separately but did not consider them simultaneously.In this study,we introduce a clustering method considering the similarity of evaluation values and the trust relations of experts and then develop a consensusmodel taking into account the altruistic behaviors of experts.First,we cluster experts into subgroups by a constrained Kmeans clustering algorithm according to the opinion similarity and trust relationship of experts.Then,we calculate the weights of experts and clusters based on the centrality degrees of experts.Next,to enhance the quality of consensus reaching,we identify three kinds of non-cooperative behaviors and propose corresponding feedback mechanisms relying on the altruistic behaviors of experts.A numerical example is given to show the effectiveness and practicality of the proposed method in emergency decision-making.The study finds that integrating altruistic behavior analysis in group decision-making can safeguard the interests of experts and ensure the integrity of decision-making information.
基金the financial support provided by the National Natural Science Foundation of China(Grant No.42302332)the Special Funding of Chongqing Postdoctoral Research Project(Grant No.2022CQBSHTB2061,2022CQBSHTB1010)+3 种基金the Chongqing Postdoctoral Science Foundation(Grant No.CSTB2022NSCQ-BHX0738,CSTB2023NSCQBHX0223)the China Postdoctoral Science Foundation(Grant No.2023M730432)the Natural Science Foundation of Chongqing(Grant No.CSTB2023NSCQMSX0913,cstc2021jcyj-msxm X0869)the Postdoctoral Science Foundation of Chongqing Jiaotong University(Grant No.F1220105,22JDKJC-A008)。
文摘Tunnel-type anchorages(TTAs)installed in human gathering areas are characterized by a shallow burial depth,and in many instances,they utilize soft rock as the bearing stratum.However,the stability control measures and the principle of shallow TTAs in soft rock have not been fully studied.Hence,a structure suitable for improving the stability of shallow TTAs in soft rock strata,named the anti-pull tie(APT),was added to the floor of the back face.Physical tests and numerical models were established to study the influence of the APT on the load transfer of TTAs,the mechanical response of the surrounding rock,the stress distribution of the interface,and the failure model.The mechanical characteristics of APTs were also studied.The results show that the ultimate bearing capacity of TTAs with an APT is increased by approximately 11.8%,as compared to the TTAs without an APT.Also,the bearing capacity of TTAs increases approximately linearly with increasing height,width,length,and quantity of APTs,and decreases approximately linearly with increasing distance from the back face and slope angle of the tie slope.The normal squeezing between the tie slope and the surrounding rock increases the shear resistance of the interface and expands the range of the surrounding rock participating in bearing sharing.Both tension and compression zones exist in the APT during loading.The tension zone extends from the tie toe to the tie bottom along the tie slope.The range of the tie body tension zone constantly expands to the deep part of the APT with an increasing load.The peak tensile stress value is located at the tie toe.The distribution of compressive stress in the tie body is the largest at the tie top,followed by the tie slope,and then the tie bottom.
基金The National Major Science and Technology Projects of China(2017ZX05030)supported this work。
文摘CO_(2)dissolution into an aqueous phase and water evaporation into a gaseous phase takes place during CO_(2)injection into an oil reservoir.This study aims to evaluate the phase behaviors of the oil-gas-water system in the displacement of crude oil by CO_(2).The composition of the JL oilfield in the northeast of China is taken as an example.The flash calculation of the oil-gas-water system was performed,based on the method presented by Li and Nghiem.The research results show that CO_(2)dissolution in the aqueous phase declines as the NaCl concentration in formation water rises.CO_(2)injection is beneficial for the evaporation of formation water.The NaCl concentration in formation water has little effect on water evaporation and dissolved-gas escape.When the injection-gas mole fraction of CO_(2)is 0.5,CO_(2)injection can reverse the phase behavior of the petroleum mixture and the oil-gas system is converted to a pure gas-condensate system.For CO_(2)injection,water vapor has little effect on the miscibility of multiple contacts,but can reduce the miscibility of the first contact.
基金The financial support by State Key Laboratory of Heavy Oil Processing, China University of Petroleum。
文摘To better understand the benzene alkylation with chloroaluminate ionic liquids(ILs) as catalyst, the interfacial properties between the benzene/butene binary reactants and chloroaluminate ILs with varying cation alkyl chain length and different anions were investigated using molecular dynamics(MD) simulations. The results indicate that ILs can obviously improve the interfacial width, solubility and diffusion of reactants compared to H_(2)SO_(4). The longer alkyl chains of cations present a density enrichment at the interface and protrude into the binary reactants phase. Furthermore, the ILs consisting of 1-octyl-3-methylimidazolium cations([Omim]^(+)) and the stronger acidity heptachlorodialuminate anions([Al_(2)Cl_(7)]^(-)) are more beneficial to promote the interfacial width and facilitate the dissolution and diffusion of benzene in both the IL bulk and the interfacial region in comparison to the ones with shorter alkyl chains cations and weaker acidity anions. The information gives us a better guideline for the design of ILs for benzene alkylation.
基金supported by National Natural Science Foundation of China(No.11875039)。
文摘The present study aims at the numerical simulations of the melting process of cerium oxide particles in RF thermal plasma.The physical model and the calculating method were described firstly;the interaction between cerium oxide particles and plasma was analyzed;specific attention was given to the effects of particle initial size,injection velocity on the particle melting and trajectory in plasma.The influence of the temperature field and velocity field distribution of the plasma around the particle trajectory on the melting effect is analyzed,and the relationship between the heat absorption efficiency of the particles and the particle size reduction process is further determined.It is also found that there exists an optimal particle initial injection velocity which led to a more concentrated final particle size distribution and a more significant reduction of particle size.The results could provide effective guidance for understanding the plasma spheroidization process of uranium dioxide and cerium dioxide powder particles.
基金funding support from National Natural Science Foundation of China(Grant No.41831278).
文摘For a special geological structure of columnar jointed rock mass(CJRM),its mechanical properties are strongly affected by the columnar joints.To describe the fracture behaviors of CJRM using the basic theories of interface mechanics for composite materials,the interface stresses of the vertical and horizontal joints,which are the two primary joints in the CJRM under triaxial compression,are studied,and their mathematical expressions are derived based on the superposition principle.Based on the obtained interface stresses of the vertical and horizontal joints in the CJRM,the crack initiation of the joint interface in the CJRM is studied using the maximum circumferential stress theory in fracture mechanics.Moreover,based on this investigation,the fracture behaviors of CJRM are analyzed.According to the results of similar material physical model tests for the CJRM,the theoretical study is verified.Finally,the influence of the mechanical parameters of the CJRM on the joint interface stress is discussed comprehensively.
基金financially supported by the Major Program of the National Social Science Foundation of China(No.18BMZ126)。
文摘Ethnic Tibetans(ETs)typically reside in the remote plateaus of China and possess strong cultural and spiritual values.Their financial decision-making is influenced by economic and physical factors,unique culture,social norms,and psychological motivators.We conducted an in-person survey of 480 randomly selected ET households across four provinces in rural China.The survey data was analyzed using three different econometric models—probit,ordered probit,and ranked ordered logit—to examine the choice of borrowing from formal or informal credit sources,the number of sources borrowed from,and repayment priority.Our findings indicate that mental accounting plays a significant role in the financial decision-making process of ET households.Additionally,we find that the informal credit source is strongly associated with the financial decisions of ET households.The majority of loans from formal financial institutions are used to meet daily needs,as opposed to purchasing productive inputs.Our results also suggest that strong social relationships and religious beliefs prevent households from defaulting,and that loans from formal financial sources receive repayment priority.China would benefit from promoting inclusive finance and encouraging the adoption of improved agricultural practices to support the prosperity of ET and other minority communities.
基金Funding of this research work is generously supported by the University Malaya Community Campus Grant-RUU2022-LL016Private Grant PV086-2022(University Poly-Tech MARA-UPTM),Kuala LumpurUniversitas Negeri Malang,Indonesia.
文摘The implementation of China’s three-child fertility policy has led to a notable increase in multiple-child families.Notably,firstborn children experience a significant transition from being an only child to a non-only child.This transition is associated with problematic behaviors,affecting their social adjustment,sibling relationships,and family harmony.Although several studies have examined the relationship between parent-child attachment and problem behaviors exhibited byfirstborn children during family transitions,thefindings have been inconsistent.Hence,a meta-analytic study was undertaken to elucidate the inconsistencies in this relationship and explore the moderating factors that may contribute to these discrepancies.Using a systematic literature retrieval and screening method,12 effect sizes were derived from the 10 eligible articles,encompassing a sample size of 5319.The meta-analysis demonstrated a low negative association between parent-child secure attachment and problem behaviors exhibited byfirstborn children during family transitions.Furthermore,the present study investigates potential moderator factors,such as children’s age and geographic region,to gain a more nuanced understanding of the relationship.Consequently,the establishment of parent-child attachment relationships has the potential to mitigate problem behaviors observed infirst-born children during family transitions.The implications of thesefindings indicate that parents can nurture secure attachment bonds with their children by demonstrating sensitive responsiveness,employing positive parenting practices,and fostering emotional availability.These efforts contribute to the cultivation of secure internal working models and positive behavioral manifestations withinfirst-born children,which in turn affect their relationships with siblings.
基金support provided by the Zhejiang Province Planning Project of Philosophy and Social Science[Grant No.22NDJC107YB]Zhejiang Provincial Natural Science Foundation of China[Grant No.LY21G020009].
文摘From the perspective of regulatory focus theory,the influencing mechanism of pro-environmental behaviors(PEBs)in the private domain on behaviors in the public domain were analyzed by revealing the mediating ef‐fect of the status quo maintenance and the moderating effect of the prevention focus orientation.The study re‐sults show that PEBs in the private domain significantly promote individuals’PEBs in the public domain.The status quo maintenance partially mediates the relationship between PEBs in the private and public domains.Specifically,individuals with a high-level prevention focus orientation strengthen the relationship between the PEBs in the private domain and the status quo maintenance,and that of the PEBs in the public domain.There‐fore,individuals with a high-level prevention focus will more likely engage in subsequent PEBs in the public domain after their initial PEBs in the private domain due to their increased status quo maintenance degree.Policymakers and practitioners should pay attention to the prevention-repetition effect and use the PEBs in the private domain to promote those in the public domain.
基金supported by the National Key R&D Program of China(2022YFE0128300).
文摘The fracturing process of sandstone is inherently complex due to its loose internal structure and deformation adaptability.Liquid nitrogen pre-injection has emerged as a promising approach to damage reservoir rocks,effectively reducing fracture pressure and establishing intricate fracture networks,thus offering a potential solution for reservoir reconstruction.To unravel the fundamental mechanisms governing sandstone fracturing behaviors following liquid nitrogen pre-injection,sandstone fracturing experiments were conducted under varying durations of liquid nitrogen injection,rock temperature,and in-situ stress conditions.The experiments showcased the evolution of injection pressure and fracture characteristics under different testing conditions,complemented by electron microscope analysis to elucidate the factors driving the complex fracture characteristics of sandstone.The findings revealed a significant decrease in fracture pressure after liquid nitrogen pre-injection,accompanied by a notable increase in the complexity of the fracture network and the roughness of the fracture surface.Moreover,prolonging the duration of liquid nitrogen injection and elevating reservoir temperature further contributed to reducing fracture pressure,consequently enhancing fracture complexity and surface roughness.Conversely,the application of confining pressure amplified fracture pressure while intensifying the degree of fracturing.Notably,the investigation highlighted the increased presence of microcracks in sandstone resulting from liquid nitrogen preinjection,facilitating fluid diffusion during fracturing and yielding lower fracture pressures,thereby enhancing the effectiveness of sandstone reservoir reformation.The research results can provide theoretical guidance for geothermal reservoir reconstruction.
基金Supported by the Natural Science Foundation of Zhejiang Province(LZ23F020005)Ningbo Science Technology Plan projects(2022Z077 and 2021S091).
文摘Existing simulations of terrorist attacks do not consider individual variations.To overcome this lim-itation,we propose a framework to model heterogeneous behavior of individuals during terrorist attacks.We constructed an emotional model that integrated personality and visual perception for pedestrians.The emotional model was then integrated with pedestrian relationship networks to establish a decision-making model that sup-ported pedestrians’altruistic behaviors.A mapping model has been developed to correlate antisocial personality traits with attack strategies employed by terrorists.Experiments demonstrate that the proposed algorithm can generate practical heterogeneous behaviors that align with existing psychological research findings.
文摘Blended teaching, which integrates the advantages of online and offline teaching, has become the main direction of higher education teaching reform. In the era of education big data, research on the online learners’ behavior based on data mining has attracted more and more attention from higher education researchers. However, in the field of foreign language teaching, research on the relationship between online learning behaviors and learning outcomes in the blended teaching mode is still at an early stage. Taking the course College English Listening in Zhejiang Yuexiu University (ZYU) as an example, this study conducted a comprehensive data analysis of online learning behaviors of 152 students of ZYU to explore the influence of online learning behaviors on learning outcomes in the blended teaching mode by utilizing Microsoft Excel and SPSS.20 statistic software. The result shows that the number of course login, the quantity and the quality of forum replies, the number of note submission, the quality of the notes, the average score of vocabulary tests, the number of the times of taking listening tests and the average score of listening tests are all significantly and positively correlated with students’ learning outcomes, while the study does not find a correlation between students’ learning outcomes and the number of the times of taking vocabulary tests, the total length of online learning and the length of video viewing. Based on the study results, implications are put forward to give reference for the teaching design and the management of the foreign language blended courses.
