Leguminosae are an important part of terrestrial ecosystems and play a key role in promoting soil nutrient cycling and improving soil properties.However,plant composition and species diversity change rapidly during th...Leguminosae are an important part of terrestrial ecosystems and play a key role in promoting soil nutrient cycling and improving soil properties.However,plant composition and species diversity change rapidly during the process of succession,the effect of leguminosae on soil physical-chemical and biological properties is still unclear.This study investigated the changes in the composition of plant community,vegetation characteristics,soil physical-chemical properties,and soil biological properties on five former farmlands in China,which had been abandoned for 0,5,10,18,and 30 a.Results showed that,with successional time,plant community developed from annual plants to perennial plants,the importance of Leguminosae and Asteraceae significantly increased and decreased,respectively,and the importance of grass increased and then decreased,having a maximum value after 5 a of abandonment.Plant diversity indices increased with successional time,and vegetation coverage and above-and below-ground biomass increased significantly with successional time after 5 a of abandonment.Compared with farmland,30 a of abandonment significantly increased soil nutrient content,but total and available phosphorus decreased with successional time.Changes in plant community composition and vegetation characteristics not only change soil properties and improve soil physical-chemical properties,but also regulate soil biological activity,thus affecting soil nutrient cycling.Among these,Leguminosae have the greatest influence on soil properties,and their importance values and community composition are significantly correlated with soil properties.Therefore,this research provides more scientific guidance for selecting plant species to stabilize soil ecosystem of farmland to grassland in the Loess Plateau,China.展开更多
Calcium phosphate cements （CPCs） are frequently used to repair bone defects. Since their discovery in the 1980s, extensive research has been conducted to improve their properties, and emerging evidence supports thei...Calcium phosphate cements （CPCs） are frequently used to repair bone defects. Since their discovery in the 1980s, extensive research has been conducted to improve their properties, and emerging evidence supports their increased application in bone tissue engineering. Much effort has been made to enhance the biological performance of CPCs, including their biocompatibility, osteoconductivity, osteoinductivity, biodegradability, bioactivity, and interactions with cells. This review article focuses on the major recent developments in CPCs, including 3D printing, injectability, stem cell delivery, growth factor and drug delivery, and pre- vascularization of CPC scaffolds via co-culture and tri-culture techniques to enhance angiogenesis and osteogenesis.展开更多
The biological and chemical conditions of the rhizosphere are known to considerably differ from those of the bulk soil, as a consequence of a range of processes that are induced either directly by the activity of plan...The biological and chemical conditions of the rhizosphere are known to considerably differ from those of the bulk soil, as a consequence of a range of processes that are induced either directly by the activity of plant roots or indirectly by the stimulation of microbial population and activity in the rhizosphere. Information about phosphorus （P） fractionation in the rhizosphere soils amended with municipal sewage sludge （MSS） is limited, were We carried out greenhouse experiments using a rhizobox in order to evaluate the effects of bean rhizosphere on the various inorganic P （Pi） fractions, organic P （Po）, P in particulate fraction （PF-P）, Olsen-P, dissolved organic C （DOC）, microbial biomass P （MBP） and alkaline phosphatase （ALP） enzyme in 10 calcareous soils amended with MSS （10 g MSS was added to 1 kg soil）. Non-occluded P, occluded P, calcium phosphate and residual P were also quantitated. The results showed that DOC, MBP and ALP activity strongly increased and PF-P and Olsen-P de- creased in the rhizosphere soils compared with in the bulk soils （P〈0.05）. The contents of non-occluded P, oc- cluded P and residuaI-P fractions in the rhizosphere soils were lower than in the bulk soils, while the contents of calcium phosphate and organic P in the rhizosphere soils were higher than in the bulk soils. Simple correlation coefficients showed that P uptake had positive relationship with non-occluded P, occluded P, calcium phosphate fractions and PF-P in the rhizosphere soils. The results suggest that the short-term application of MSS to the cal- careous soils may increase Po and calcium phosphate fractions in the rhizosphere soils, and calcium phosphate fraction is potentially available to crops.展开更多
Objective To explore the biological properties of keratinocytes from differently-aged healthy human beings. Methods Keratinocytes from fetus,teenager and middle-aged groups were separated and cultured. The population ...Objective To explore the biological properties of keratinocytes from differently-aged healthy human beings. Methods Keratinocytes from fetus,teenager and middle-aged groups were separated and cultured. The population doubling time (PDT) and cell growth curve in different cells were compared,and the cell cycles were analyzed by flow cytometry. Results ① In primary culture of keratinocytes,the adherence time in middle-aged group was longer than that in fetus and teenager groups. However,all cell morphology showed no obvious differences. In subculture of keratinocytes,with donator’s age increasing,time of cell adherence prolonged,passage number decreased and differences in cell morphology were obvious. ② The average PDT of keratinocytes was shorter in fetus group than in teenager and middle-aged groups. But difference in cell growth curve between different passages was not observed. ③ Keratinocytes showed G2/M period in fetus group but G0/G1 period in teenager and middle-aged groups mainly. Conclusion As age increases,the biological properties of keratinocytes change obviously.展开更多
Eleven nitrate non-utilizing (nit) mutants were recovered from six isolates of Magnaporthe grisea cultured on MM media -amended with 60 g/L potassium chlorate, with a frequency of 1.42 %. Some biological properties, s...Eleven nitrate non-utilizing (nit) mutants were recovered from six isolates of Magnaporthe grisea cultured on MM media -amended with 60 g/L potassium chlorate, with a frequency of 1.42 %. Some biological properties, such as growth rate, growth biomass, cultural characters, conidial production, sexual reproduction ability, and pathogenicity were compared between nit mutants and their parent isolates. Results showed that all the nit mutants were resistant to chlorate. Some important biological properties such as the growth rate on YPSA, conidial production ability on TPSA, pathogenicity, had no significant differences between nit mutants and their parent isolates. Mating type didn't change, but perithecia production ability of fertile isolates changed significantly as compared with that of their parent isolates. Therefore, the nit can be used as a genetic marker to study the genetics such as pathogenicity, fungicide resistance in Magnaporthe grisea.展开更多
3D printing has made remarkable progress in soft tissue reconstruction enabling the custom design of complex material implants with patient specific geometry.The aim of this study was to inkjet print mechanically rein...3D printing has made remarkable progress in soft tissue reconstruction enabling the custom design of complex material implants with patient specific geometry.The aim of this study was to inkjet print mechanically reinforced biocompatible hydrogels.Here,we developed a double crosslinked ink by optimizing the rheological properties of solutions of sodium alginate(NaAlg),NaAlg/transglutaminase(TG),CaCl_(2)and gelatin/CaCl_(2).The results showed that a two-component ink system comprising NaAlg(4%w/v)/TG(0.8%w/v)and gelatin(4%w/v)/CaCl_(2)(3%w/v)gave optimum printability.The mechanical and biological properties of printed alginate/gelatin hydrogels prepared from inks with different gelatin contents,and incorporated fibroblasts,were characterized by Scanning Electron Microscope(SEM),mechanical testing and laser confocal microscopy.The compressive moduli of alginate/gelatin hydrogels could be adjusted from 19.2 kPa±1.2 kPa to 65.9 kPa±3.3 kPa by increasing the content of gelatin.After incubation for 7 d,fibroblasts had permeated all printed hydrogels and the rate of proliferation increased with increasing gelatin content.The highest cell proliferation rate(497%)was obtained in a hydrogel containing 4.5%(w/v)gelatin.This study offers a new strategy for the fabrication of 3D structures used to mimic the function of native tissues.展开更多
Porous and functionally graded materials have seen extensive applications in modern biomedical devices—allowing for improved site-specific performance;their appreciable mechanical,corrosive,and biocompatible properti...Porous and functionally graded materials have seen extensive applications in modern biomedical devices—allowing for improved site-specific performance;their appreciable mechanical,corrosive,and biocompatible properties are highly sought after for lightweight and high-strength load-bearing orthopedic and dental implants.Examples of such porous materials are metals,ceramics,and polymers.Although,easy to manufacture and lightweight,porous polymers do not inherently exhibit the required mechanical strength for hard tissue repair or replacement.Alternatively,porous ceramics are brittle and do not possess the required fatigue resistance.On the other hand,porous biocompatible metals have shown tailorable strength,fatigue resistance,and toughness.Thereby,a significant interest in investigating the manufacturing challenges of porous metals has taken place in recent years.Past research has shown that once the advantages of porous metallic structures in the orthopedic implant industry have been realized,their biological and biomechanical compatibility—with the host bone—has been followed up with extensive methodical research.Various manufacturing methods for porous or functionally graded metals are discussed and compared in this review,specifically,how the manufacturing process influences microstructure,graded composition,porosity,biocompatibility,and mechanical properties.Most of the studies discussed in this review are related to porous structures for bone implant applications;however,the understanding of these investigations may also be extended to other devices beyond the biomedical field.展开更多
Magnesium(Mg)-based materials are a new generation of alloys with the exclusive ability to be biodegradable within the human/animal body.In addition to biodegradability,their inherent biocompatibility and similar-to-b...Magnesium(Mg)-based materials are a new generation of alloys with the exclusive ability to be biodegradable within the human/animal body.In addition to biodegradability,their inherent biocompatibility and similar-to-bone density make Mg-based alloys good candidates for fabricating surgical bioimplants for use in orthopedic and traumatology treatments.To this end,nowadays additive manufacturing(AM)along with three-dimensional(3D)printing represents a promising manufacturing technique as it allows for the integration of bioimplant design and manufacturing processes specific to given applications.Meanwhile,this technique also faces many new challenges associated with the properties of Mg-based alloys,including high chemical reactivity,potential for combustion,and low vaporization temperature.In this review article,various AM processes to fabricate biomedical implants from Mg-based alloys,along with their metallic microstructure,mechanical properties,biodegradability,biocompatibility,and antibacterial properties,as well as various post-AM treatments were critically reviewed.Also,the challenges and issues involved in AM processes from the perspectives of bioimplant design,properties,and applications were identified;the possibilities and potential scope of the Mg-based scaffolds/implants are discussed and highlighted.展开更多
Deforestation occurs at an alarming rate in upland watersheds of Bangladesh and has many detrimental effects on the environment. This study reports the effects of deforestation on soil biological proper- ties along wi...Deforestation occurs at an alarming rate in upland watersheds of Bangladesh and has many detrimental effects on the environment. This study reports the effects of deforestation on soil biological proper- ties along with some important physicochemical parameters of a southern upland watershed in.Bangladesh. Soils were sampled at 4 paired sites, each pair representing a deforested site and a forested site, and having similar topographical characteristics. Significantly fewer （p〈0.001） fungi and bacteria, and lower microbial respiration, active microbial biomass, metabolic and microbial quotients were found in soils of the deforested sites. Soil physical properties such as moisture content, water holding capacity, and chemical properties such as organic matter, total N, avail- able P and EC were also lower in deforested soils. Bulk density and pH were significantly higher in deforested soils. Available Ca and Mg were inconsistent between the two land uses at all the paired sites. Re- duced abundance and＇biomass of soil mesofauna were recorded in defor- ested soils. However, soil anecic species were more abundant in defor- ested soils than epigeic and endogeic species, which were more abundant in forested soils than on deforested sites.展开更多
Chuanxiong Rhizoma is a widely used Chinese herbal medicine in the past 2000 years.Chuanxiong Rhizoma is composed of volatile oils,phthalide lactones,phenolic acids,polysaccharides and other compounds.To date,more tha...Chuanxiong Rhizoma is a widely used Chinese herbal medicine in the past 2000 years.Chuanxiong Rhizoma is composed of volatile oils,phthalide lactones,phenolic acids,polysaccharides and other compounds.To date,more than 149 compounds in Chuanxiong Rhizoma have been isolated and identified,and some of them have been reported to possess promising biological properties on cardiovascular and central nervous system disorders besides their anti-cancer and antioxidant effects.Modulation of inflammatory mediators and apoptotic factors are believed to contribute to its bioactivities.Analytical methods,such as HPLC,GC and UPLC,are employed for qualitative evaluation of Chuanxiong Rhizoma.In this work,harvest period,growing habitat,processing method and storage,which can affect the quality of Chuanxiong Rhizoma,were also discussed.Comprehensive quality control methods should be developed to ensure the safety,quality and efficacy use of Chuanxiong Rhizoma.Herein,we collected and analyzed the literature of Chuanxiong Rhizoma published on CNKI,ScienceDirect,Springer link,Wiley and PubMed in past two decades,and up-to-date information of Chuanxiong Rhizoma was provided in this paper.We suggested ligustilide,butylidenephthalide and total senkyunolides as the chemical markers to evaluate the quality of Chuanxiong Rhizoma.Additionally,the influences of soil conditions and processing methods on Chuanxiong Rhizoma as future research perspectives should also be further assessed.展开更多
An open-ended coaxial line reflection method especially suitable for meas-uring the dielectric properties of biological tissue in vivo is described.This method offersthe advantage of not requiring any special preparat...An open-ended coaxial line reflection method especially suitable for meas-uring the dielectric properties of biological tissue in vivo is described.This method offersthe advantage of not requiring any special preparation of the samples to be measured but aclose contact with the open end of a coaxial line.It is,therefore,very convenient to acquirea large number of measurement data in broad band rapidly.The method may also be usedto measure the properties of other substances.The measuring system consists of a networkanalyzer controlled by a microcomputer and calibrated by using ANA procedure to elimi-hate the influnce of error network introduced by the adapter,some connectors,etc.In or-der to reach higher accuracy,the iterative method is used to determine the parameters ofthe equivalent circuit.Measurements of permeativities of some living tissues have been per-formed in the frequency band of 0.5-2GHz.Compared with the results known in somepapers,the validity of this method has been confirmed.The difference in dielectric proper-ties between living and dead tissues,and the tissue permeativites(ε)versus frequency andduration of measurement after death have also been measured.展开更多
Biomedical magnesium(Mg)alloys have garnered significant attention because of their unique biodegradability,favorable biocompatibility,and suitable mechanical properties.The incorporation of rare earth(RE)elements,wit...Biomedical magnesium(Mg)alloys have garnered significant attention because of their unique biodegradability,favorable biocompatibility,and suitable mechanical properties.The incorporation of rare earth(RE)elements,with their distinct physical and chemical properties,has greatly contributed to enhancing the mechanical performance,degradation behavior,and biological performance of biomedical Mg alloys.Currently,a series of RE-Mg alloys are being designed and investigated for orthopedic implants and cardiovascular stents,achieving substantial and encouraging research progress.In this work,a comprehensive summary of the state-of-the-art in biomedical RE-Mg alloys is provided.The physiological effects and design standards of RE elements in biomedical Mg alloys are discussed.Particularly,the degradation behavior and mechanical properties,including their underlying action are studied in-depth.Furthermore,the preparation techniques and current application status of RE-Mg alloys are reviewed.Finally,we address the ongoing challenges and propose future prospects to guide the development of high-performance biomedical Mg-RE alloys.展开更多
We collected soil samples from two representative sites at Aatmile of Khagarachari hill district in Chittagong Hill Tracts. One of the sites was under shifting cultivation and the other an adjacent 13-year old teak pl...We collected soil samples from two representative sites at Aatmile of Khagarachari hill district in Chittagong Hill Tracts. One of the sites was under shifting cultivation and the other an adjacent 13-year old teak plantation. Both sites were in the same physiographic condition and same aspect with parable soil type, which enabled us to measure the effects of shifting cultivation on soil micro-flora. We studied soil phys-ico-chemical properties and the biochemical and biological properties of soil microbes. Moisture and organic matter content as well as fungi and bacterial populations, both in surface and subsurface soils, were signifi-cantly （p≤0.001） lower in shifting cultivated soils compared to soils not under shifting cultivation, i.e. the teak plantation site. The most abundant bacteria in surface （0-10 cm） and sub-surface （10-20 cm） soils under shifting cultivation were Pseudomonas diminuta and Shigella, respec-tively, while in corresponding soil layers of teak plantation, predominant microbes were Bacillus firmus （0-10 cm） and Xanthomonas （10-20 cm）. The microbial population differences cannot be explained by soil texture differences because of the textural similarity in soils from the two sites but could be related to the significantly lower moisture and organic mat-ter contents in soils under shifting cultivation.展开更多
Objective: The relA gene,a gene associated with the synthesis of rigorous response signaling molecule (p)ppGpp in Burkholderia pseudomallei, was knocked out and its effects on the biological functions of bacterial gro...Objective: The relA gene,a gene associated with the synthesis of rigorous response signaling molecule (p)ppGpp in Burkholderia pseudomallei, was knocked out and its effects on the biological functions of bacterial growth, motility and biofilm formation were investigated. Methods: The plasmids with trimethoprim resistance (TPR) were modified by enzyme digestion and enzyme ligation method. The TPR fragment was linked to the suicide plasmid pK18mobSacB containing SacB sucrose killing gene by Bgl Ⅱ enzyme digestion site, and trimethoprim resistance was obtained Plasmid(TPR-pK18mobSacB);The relA gene of Burkholderia pseudomallei HNBP001 was knocked out by homologous recombinant gene knockout method, and the relA mutant was obtained. The growth, motility and biofilm phenotypes of Burkholderia pseudomallei HNBP001 were compared before and after the deletion of relA gene. Results: The relA mutant was successfully constructed. The growth rate, motility and biofilm formation of ΔrelA decreased. Conclusion: The modified plasmid TPR- pK18mobSacB can improve the knockout efficiency of HNBP001 strain, which can be widely used in the gene knockout of Burkholderia pseudomallei, and provide convenience for the laboratory to study the gene function of Burkholderia pseudomallei at the molecular level;The mutant of the relA gene inhibits the growth, motility and biofilm formation of HNBP001.展开更多
The synthesis, preparation, chemical reactivities and biological activity of simple heterocyclic and heteropolycyclic nitrogen systems as small units as functional pyrazoles, pyridine and pyrimidine, and the related f...The synthesis, preparation, chemical reactivities and biological activity of simple heterocyclic and heteropolycyclic nitrogen systems as small units as functional pyrazoles, pyridine and pyrimidine, and the related fused systems are reviewed. Among the various possible routes to the formation, isomeric structures have been cited because of patented reaching advanced phases of clinical trials, from 2000 to 2020.展开更多
Twenty-two nitrate nonutilizing （nit） mutants were recovered from five wild-type isolates of Fusarium graminearum and fifty nit mutants were recovered from three JS399-19-resistant mutants of F. graminearum cultured...Twenty-two nitrate nonutilizing （nit） mutants were recovered from five wild-type isolates of Fusarium graminearum and fifty nit mutants were recovered from three JS399-19-resistant mutants of F. graminearum cultured on MMC medium. Some biological properties were compared between nit mutants and their parental isolates. The results showed that there were no significant differences in growth rate, cultural characters or pathogenicity between JS399-19-resistant nit mutants and their parental isolates. But the conidial production and the sexual reproduction ability changed to some extent. There was no cross resistance toward chlorate and JS399-19 in F. graminearum and the resistance could be stable through 20-time subcultures. Therefore, the nit could be used as a genetic marker for studying the genetics of JS399-19 resistance in E graminearum, which was used to study JS399-19 resistance transferability in hyphal fusion. Resistance in JS399-19 could not be transferred by hyphal fusion or could be transferred with low chance between two compatible isolates, which would delay the development of JS399-19 resistance in the field.展开更多
OBJECTIVE To establish a murine uterine cervical cancer cell line and to define its biological characters. METHODS Transplanted tumor tissue was used for in vitro primary culture of U14 cervical carcinoma cells. After...OBJECTIVE To establish a murine uterine cervical cancer cell line and to define its biological characters. METHODS Transplanted tumor tissue was used for in vitro primary culture of U14 cervical carcinoma cells. After 20 passages, we examined its morphology, chromosomes, tumorigenicity and produced a growth curve. CK was detected by immunohistochemistry, the cell cycle determined by flow cytometry and the metastatic potential assessed in 615 and C57BL/c mice. We also transfected the cells with the pEGFP-N1 plasmid. RESULTS A newly established murine cell line was passaged 50 times over a period of 10 months. The cells grow as a partially suspended culture, and are immunohistochemically CK（＋）. The cell line is characterized by a hypotetraploid karyotype, a chromosomal number of 64-68 and a doubling time of 21.8 h. Exponential growth occurs by the third and forth day of culture. Cell cycle analysis showed G1 34%, G2 26%, and 40% in the S phase. The tumorigenicity was 100% upon implantation. No mycoplasma contamination was detected. A monoclonal continuous U14-GFP cell strain which was 100% GFP （＋） was also produced. CONCLUSION We successfully established a new murine cervical U14 carcinoma cell line and an U14-GFP monoclonal strain. These cell lines are ideal for combined in vivo and in vitro tumor research.展开更多
Magnesium(Mg) and its alloys have emerged as a favored candidate for bio-regenerative medical implants due to their superior biocompatibility, biodegradability and the elastic modulus close to that of human bone. Unfo...Magnesium(Mg) and its alloys have emerged as a favored candidate for bio-regenerative medical implants due to their superior biocompatibility, biodegradability and the elastic modulus close to that of human bone. Unfortunately, the rapid and uncontrollable degradation rate of Mg alloys in chloride-rich body microenvironments limits their clinical orthopedic applications. Recently, Calcium Phosphate(Ca-P)biomaterials, especially Hydroxyapatite(HA), have been broadly applied in the surface functional modification of metal-based biomaterials attributed to their excellent bioactivity and biocompatibility. Hydrothermal modification of Ca-P coatings on Mg alloys has been extensively exploited by researchers for its significant superiorities in controlling coating structure and improving interfacial bonding strength for better osseointegration and corrosion resistance. This work focuses on the up-to-the-minute advances in Ca-P coatings on the surface of Mg and its alloys via hydrothermal methods, including the strategies and mechanisms of hydrothermal modification. Herein, we are inclined to share some feasible and attractive hydrothermal surface modification strategies. From the perspectives of hydrothermal manufacturing technique innovation and coating structure optimization, we evaluate how to foster the corrosion resistance, coating bonding strength, osseointegration and antibacterial properties of Mg alloys with Ca-P coatings synthesized by hydrothermal method. The challenges and future perspectives on the follow-up exploration of Mg alloys for orthopedic applications are also elaborately proposed.展开更多
Magnesium(Mg)and its alloys have become a hot research topic in various industries owing to the specific physical and chemical properties.However,high corrosion rate is considered the key lifetime-limiting.Plasma elec...Magnesium(Mg)and its alloys have become a hot research topic in various industries owing to the specific physical and chemical properties.However,high corrosion rate is considered the key lifetime-limiting.Plasma electrolytic oxidation(PEO)method is a simple strategy to deposit an oxide layer on the surface of light metals such as magnesium alloys,to control corrosion rate and promote some other properties,depending on their performances.Nevertheless,their features including their micropore size,distribution,and interconnectivity,and microcracks have not been improved to an acceptable level to support long-term performances of the magnesium-based substrates.Studies have introduced micro/nano-enabled approaches to enhance various properties of PEO coatings such as corrosion resistance,tribological properties,self-healing ability,bioactivity,biocompatibility,antibacterial properties,or catalytic performances.These strategies consist of incorporating of micro and nanoparticles into the PEO layers to produce multi-functional surfaces or the formation of multi-layered coatings to cover the defects of PEO coatings.In this perspective,the present paper aims to overview various nano/micro-enabled strategies to promote the properties of PEO coatings on magnesium alloys.The main focus is given to the functional changes that occurred in response to the incorporation of various types of nano/micro-structures into the PEO coatings on magnesium alloys.展开更多
A study was conducted at two pair sites of Chittagong Hill Tracts in Bangladesh to find out the effects of shifting cultivation on soil fungi and bacterial population. The first pair of sites with shifting culti-vatio...A study was conducted at two pair sites of Chittagong Hill Tracts in Bangladesh to find out the effects of shifting cultivation on soil fungi and bacterial population. The first pair of sites with shifting culti-vation and village common forest-managed by indigenous community was at Madhya Para in Rangamati district and the second pair of sites with the shifting cultivated land and village common forest at Ampu Para in Bandarban district of Chittagong Hill Tracts. At both the locations with two different land uses, soil textures in surface （0？10 cm） and sub-surface （10？20 cm） soils varied from sandy loam to sandy clay loam. Soil pH and moisture content were lower in shifting cultivated land com-pared to village common forest. The results also showed that both fungal and bacterial population in surface and subsurface soils was significantly （p ≤ 0.05） lower, in most cases, in shifting cultivated land compared to village common forest at both Madhya Para and Ampu Para. At Ranga-mati and Bandarban in shifting cultivated lands, Colletrotrichum and Fusarium fungi were absent and all the bacterial genus viz. Coccus, Bacillus and Streptococcus common in two different locations with dif-ferent land uses. Common identified fungi at both the land uses and locations were Aspergillus, Rhizopus, Trichoderma and Penicillium. Further study can be done on the other soil biota to understand the extent of environmental deterioration due to shifting cultivation.展开更多
基金supported by the Forestry Science and Technology Innovation Project of Shaanxi Province,China(SKLK2022-02-14)the Shaanxi Province Key Research and Development Program(2022SF-285)the China Postdoctoral Science Foundation(2020M683594).
文摘Leguminosae are an important part of terrestrial ecosystems and play a key role in promoting soil nutrient cycling and improving soil properties.However,plant composition and species diversity change rapidly during the process of succession,the effect of leguminosae on soil physical-chemical and biological properties is still unclear.This study investigated the changes in the composition of plant community,vegetation characteristics,soil physical-chemical properties,and soil biological properties on five former farmlands in China,which had been abandoned for 0,5,10,18,and 30 a.Results showed that,with successional time,plant community developed from annual plants to perennial plants,the importance of Leguminosae and Asteraceae significantly increased and decreased,respectively,and the importance of grass increased and then decreased,having a maximum value after 5 a of abandonment.Plant diversity indices increased with successional time,and vegetation coverage and above-and below-ground biomass increased significantly with successional time after 5 a of abandonment.Compared with farmland,30 a of abandonment significantly increased soil nutrient content,but total and available phosphorus decreased with successional time.Changes in plant community composition and vegetation characteristics not only change soil properties and improve soil physical-chemical properties,but also regulate soil biological activity,thus affecting soil nutrient cycling.Among these,Leguminosae have the greatest influence on soil properties,and their importance values and community composition are significantly correlated with soil properties.Therefore,this research provides more scientific guidance for selecting plant species to stabilize soil ecosystem of farmland to grassland in the Loess Plateau,China.
基金supported by NIH R01 DE14190 and R21 DE22625(HX)the National Science Foundation of China 81401794(PW)and 81400487(LW)+2 种基金the Youth Fund of Science and Technology of Jilin Province 20150520043JH(LW)the China Postdoctoral Science Foundation 2015M581405(LW)the University of Maryland School of Dentistry bridge fund(HX)
文摘Calcium phosphate cements （CPCs） are frequently used to repair bone defects. Since their discovery in the 1980s, extensive research has been conducted to improve their properties, and emerging evidence supports their increased application in bone tissue engineering. Much effort has been made to enhance the biological performance of CPCs, including their biocompatibility, osteoconductivity, osteoinductivity, biodegradability, bioactivity, and interactions with cells. This review article focuses on the major recent developments in CPCs, including 3D printing, injectability, stem cell delivery, growth factor and drug delivery, and pre- vascularization of CPC scaffolds via co-culture and tri-culture techniques to enhance angiogenesis and osteogenesis.
文摘The biological and chemical conditions of the rhizosphere are known to considerably differ from those of the bulk soil, as a consequence of a range of processes that are induced either directly by the activity of plant roots or indirectly by the stimulation of microbial population and activity in the rhizosphere. Information about phosphorus （P） fractionation in the rhizosphere soils amended with municipal sewage sludge （MSS） is limited, were We carried out greenhouse experiments using a rhizobox in order to evaluate the effects of bean rhizosphere on the various inorganic P （Pi） fractions, organic P （Po）, P in particulate fraction （PF-P）, Olsen-P, dissolved organic C （DOC）, microbial biomass P （MBP） and alkaline phosphatase （ALP） enzyme in 10 calcareous soils amended with MSS （10 g MSS was added to 1 kg soil）. Non-occluded P, occluded P, calcium phosphate and residual P were also quantitated. The results showed that DOC, MBP and ALP activity strongly increased and PF-P and Olsen-P de- creased in the rhizosphere soils compared with in the bulk soils （P〈0.05）. The contents of non-occluded P, oc- cluded P and residuaI-P fractions in the rhizosphere soils were lower than in the bulk soils, while the contents of calcium phosphate and organic P in the rhizosphere soils were higher than in the bulk soils. Simple correlation coefficients showed that P uptake had positive relationship with non-occluded P, occluded P, calcium phosphate fractions and PF-P in the rhizosphere soils. The results suggest that the short-term application of MSS to the cal- careous soils may increase Po and calcium phosphate fractions in the rhizosphere soils, and calcium phosphate fraction is potentially available to crops.
基金supported by the Shaanxi Scientific and Technological Project [(2006k12-G3(10)]
文摘Objective To explore the biological properties of keratinocytes from differently-aged healthy human beings. Methods Keratinocytes from fetus,teenager and middle-aged groups were separated and cultured. The population doubling time (PDT) and cell growth curve in different cells were compared,and the cell cycles were analyzed by flow cytometry. Results ① In primary culture of keratinocytes,the adherence time in middle-aged group was longer than that in fetus and teenager groups. However,all cell morphology showed no obvious differences. In subculture of keratinocytes,with donator’s age increasing,time of cell adherence prolonged,passage number decreased and differences in cell morphology were obvious. ② The average PDT of keratinocytes was shorter in fetus group than in teenager and middle-aged groups. But difference in cell growth curve between different passages was not observed. ③ Keratinocytes showed G2/M period in fetus group but G0/G1 period in teenager and middle-aged groups mainly. Conclusion As age increases,the biological properties of keratinocytes change obviously.
文摘Eleven nitrate non-utilizing (nit) mutants were recovered from six isolates of Magnaporthe grisea cultured on MM media -amended with 60 g/L potassium chlorate, with a frequency of 1.42 %. Some biological properties, such as growth rate, growth biomass, cultural characters, conidial production, sexual reproduction ability, and pathogenicity were compared between nit mutants and their parent isolates. Results showed that all the nit mutants were resistant to chlorate. Some important biological properties such as the growth rate on YPSA, conidial production ability on TPSA, pathogenicity, had no significant differences between nit mutants and their parent isolates. Mating type didn't change, but perithecia production ability of fertile isolates changed significantly as compared with that of their parent isolates. Therefore, the nit can be used as a genetic marker to study the genetics such as pathogenicity, fungicide resistance in Magnaporthe grisea.
基金This work was supported by the Development Projects of Key Research(No.2018YFE0207900)People’s Liberation Army(No.BWS17J036,18-163-13-ZT-003-011-01)the National Natural Science Foundation of China(Nos.51835010 and 51375371).
文摘3D printing has made remarkable progress in soft tissue reconstruction enabling the custom design of complex material implants with patient specific geometry.The aim of this study was to inkjet print mechanically reinforced biocompatible hydrogels.Here,we developed a double crosslinked ink by optimizing the rheological properties of solutions of sodium alginate(NaAlg),NaAlg/transglutaminase(TG),CaCl_(2)and gelatin/CaCl_(2).The results showed that a two-component ink system comprising NaAlg(4%w/v)/TG(0.8%w/v)and gelatin(4%w/v)/CaCl_(2)(3%w/v)gave optimum printability.The mechanical and biological properties of printed alginate/gelatin hydrogels prepared from inks with different gelatin contents,and incorporated fibroblasts,were characterized by Scanning Electron Microscope(SEM),mechanical testing and laser confocal microscopy.The compressive moduli of alginate/gelatin hydrogels could be adjusted from 19.2 kPa±1.2 kPa to 65.9 kPa±3.3 kPa by increasing the content of gelatin.After incubation for 7 d,fibroblasts had permeated all printed hydrogels and the rate of proliferation increased with increasing gelatin content.The highest cell proliferation rate(497%)was obtained in a hydrogel containing 4.5%(w/v)gelatin.This study offers a new strategy for the fabrication of 3D structures used to mimic the function of native tissues.
基金supported by the National Institute of Arthritis and Musculoskeletal and Skin Diseases of the National Institutes of Health under Award Number R01 AR067306-01 and R01 AR078241(PI—Bandyopadhyay)。
文摘Porous and functionally graded materials have seen extensive applications in modern biomedical devices—allowing for improved site-specific performance;their appreciable mechanical,corrosive,and biocompatible properties are highly sought after for lightweight and high-strength load-bearing orthopedic and dental implants.Examples of such porous materials are metals,ceramics,and polymers.Although,easy to manufacture and lightweight,porous polymers do not inherently exhibit the required mechanical strength for hard tissue repair or replacement.Alternatively,porous ceramics are brittle and do not possess the required fatigue resistance.On the other hand,porous biocompatible metals have shown tailorable strength,fatigue resistance,and toughness.Thereby,a significant interest in investigating the manufacturing challenges of porous metals has taken place in recent years.Past research has shown that once the advantages of porous metallic structures in the orthopedic implant industry have been realized,their biological and biomechanical compatibility—with the host bone—has been followed up with extensive methodical research.Various manufacturing methods for porous or functionally graded metals are discussed and compared in this review,specifically,how the manufacturing process influences microstructure,graded composition,porosity,biocompatibility,and mechanical properties.Most of the studies discussed in this review are related to porous structures for bone implant applications;however,the understanding of these investigations may also be extended to other devices beyond the biomedical field.
文摘Magnesium(Mg)-based materials are a new generation of alloys with the exclusive ability to be biodegradable within the human/animal body.In addition to biodegradability,their inherent biocompatibility and similar-to-bone density make Mg-based alloys good candidates for fabricating surgical bioimplants for use in orthopedic and traumatology treatments.To this end,nowadays additive manufacturing(AM)along with three-dimensional(3D)printing represents a promising manufacturing technique as it allows for the integration of bioimplant design and manufacturing processes specific to given applications.Meanwhile,this technique also faces many new challenges associated with the properties of Mg-based alloys,including high chemical reactivity,potential for combustion,and low vaporization temperature.In this review article,various AM processes to fabricate biomedical implants from Mg-based alloys,along with their metallic microstructure,mechanical properties,biodegradability,biocompatibility,and antibacterial properties,as well as various post-AM treatments were critically reviewed.Also,the challenges and issues involved in AM processes from the perspectives of bioimplant design,properties,and applications were identified;the possibilities and potential scope of the Mg-based scaffolds/implants are discussed and highlighted.
文摘Deforestation occurs at an alarming rate in upland watersheds of Bangladesh and has many detrimental effects on the environment. This study reports the effects of deforestation on soil biological proper- ties along with some important physicochemical parameters of a southern upland watershed in.Bangladesh. Soils were sampled at 4 paired sites, each pair representing a deforested site and a forested site, and having similar topographical characteristics. Significantly fewer （p〈0.001） fungi and bacteria, and lower microbial respiration, active microbial biomass, metabolic and microbial quotients were found in soils of the deforested sites. Soil physical properties such as moisture content, water holding capacity, and chemical properties such as organic matter, total N, avail- able P and EC were also lower in deforested soils. Bulk density and pH were significantly higher in deforested soils. Available Ca and Mg were inconsistent between the two land uses at all the paired sites. Re- duced abundance and＇biomass of soil mesofauna were recorded in defor- ested soils. However, soil anecic species were more abundant in defor- ested soils than epigeic and endogeic species, which were more abundant in forested soils than on deforested sites.
基金The 12thinnovation activity plan-of undergraduates in the Shanghai University of Traditional Chinese Medicine(Grant No.2019SHUTCM060)the Natural Science Foundation of Shanghai(Grant No.19ZR1457700)+1 种基金2020 New Agricultural Science Research and Reform Practice Project of the Ministry of Education2020 Key Undergraduate Education Reform Project of Shanghai Colleges。
文摘Chuanxiong Rhizoma is a widely used Chinese herbal medicine in the past 2000 years.Chuanxiong Rhizoma is composed of volatile oils,phthalide lactones,phenolic acids,polysaccharides and other compounds.To date,more than 149 compounds in Chuanxiong Rhizoma have been isolated and identified,and some of them have been reported to possess promising biological properties on cardiovascular and central nervous system disorders besides their anti-cancer and antioxidant effects.Modulation of inflammatory mediators and apoptotic factors are believed to contribute to its bioactivities.Analytical methods,such as HPLC,GC and UPLC,are employed for qualitative evaluation of Chuanxiong Rhizoma.In this work,harvest period,growing habitat,processing method and storage,which can affect the quality of Chuanxiong Rhizoma,were also discussed.Comprehensive quality control methods should be developed to ensure the safety,quality and efficacy use of Chuanxiong Rhizoma.Herein,we collected and analyzed the literature of Chuanxiong Rhizoma published on CNKI,ScienceDirect,Springer link,Wiley and PubMed in past two decades,and up-to-date information of Chuanxiong Rhizoma was provided in this paper.We suggested ligustilide,butylidenephthalide and total senkyunolides as the chemical markers to evaluate the quality of Chuanxiong Rhizoma.Additionally,the influences of soil conditions and processing methods on Chuanxiong Rhizoma as future research perspectives should also be further assessed.
文摘An open-ended coaxial line reflection method especially suitable for meas-uring the dielectric properties of biological tissue in vivo is described.This method offersthe advantage of not requiring any special preparation of the samples to be measured but aclose contact with the open end of a coaxial line.It is,therefore,very convenient to acquirea large number of measurement data in broad band rapidly.The method may also be usedto measure the properties of other substances.The measuring system consists of a networkanalyzer controlled by a microcomputer and calibrated by using ANA procedure to elimi-hate the influnce of error network introduced by the adapter,some connectors,etc.In or-der to reach higher accuracy,the iterative method is used to determine the parameters ofthe equivalent circuit.Measurements of permeativities of some living tissues have been per-formed in the frequency band of 0.5-2GHz.Compared with the results known in somepapers,the validity of this method has been confirmed.The difference in dielectric proper-ties between living and dead tissues,and the tissue permeativites(ε)versus frequency andduration of measurement after death have also been measured.
基金supported by National Key Research and Development Program of China[2023YFB4605800]National Natural Science Foundation of China[51935014,52165043]+3 种基金JiangXi Provincial Natural Science Foundation of China[20224ACB204013,20224ACB214008]Jiangxi Provincial Cultivation Program for Academic and Technical Leaders of Major Subjects[20225BCJ23008]Anhui Provincial Natural Science Foundation[2308085ME171]The University Synergy Innovation Program of Anhui Province[GXXT-2023-025,GXXT-2023-026].
文摘Biomedical magnesium(Mg)alloys have garnered significant attention because of their unique biodegradability,favorable biocompatibility,and suitable mechanical properties.The incorporation of rare earth(RE)elements,with their distinct physical and chemical properties,has greatly contributed to enhancing the mechanical performance,degradation behavior,and biological performance of biomedical Mg alloys.Currently,a series of RE-Mg alloys are being designed and investigated for orthopedic implants and cardiovascular stents,achieving substantial and encouraging research progress.In this work,a comprehensive summary of the state-of-the-art in biomedical RE-Mg alloys is provided.The physiological effects and design standards of RE elements in biomedical Mg alloys are discussed.Particularly,the degradation behavior and mechanical properties,including their underlying action are studied in-depth.Furthermore,the preparation techniques and current application status of RE-Mg alloys are reviewed.Finally,we address the ongoing challenges and propose future prospects to guide the development of high-performance biomedical Mg-RE alloys.
基金United States Department of Agriculture(USDA) for funding this research
文摘We collected soil samples from two representative sites at Aatmile of Khagarachari hill district in Chittagong Hill Tracts. One of the sites was under shifting cultivation and the other an adjacent 13-year old teak plantation. Both sites were in the same physiographic condition and same aspect with parable soil type, which enabled us to measure the effects of shifting cultivation on soil micro-flora. We studied soil phys-ico-chemical properties and the biochemical and biological properties of soil microbes. Moisture and organic matter content as well as fungi and bacterial populations, both in surface and subsurface soils, were signifi-cantly （p≤0.001） lower in shifting cultivated soils compared to soils not under shifting cultivation, i.e. the teak plantation site. The most abundant bacteria in surface （0-10 cm） and sub-surface （10-20 cm） soils under shifting cultivation were Pseudomonas diminuta and Shigella, respec-tively, while in corresponding soil layers of teak plantation, predominant microbes were Bacillus firmus （0-10 cm） and Xanthomonas （10-20 cm）. The microbial population differences cannot be explained by soil texture differences because of the textural similarity in soils from the two sites but could be related to the significantly lower moisture and organic mat-ter contents in soils under shifting cultivation.
基金Fund Project:Major Science and Technology Program of Hainan Province(No.ZDKJ202003)。
文摘Objective: The relA gene,a gene associated with the synthesis of rigorous response signaling molecule (p)ppGpp in Burkholderia pseudomallei, was knocked out and its effects on the biological functions of bacterial growth, motility and biofilm formation were investigated. Methods: The plasmids with trimethoprim resistance (TPR) were modified by enzyme digestion and enzyme ligation method. The TPR fragment was linked to the suicide plasmid pK18mobSacB containing SacB sucrose killing gene by Bgl Ⅱ enzyme digestion site, and trimethoprim resistance was obtained Plasmid(TPR-pK18mobSacB);The relA gene of Burkholderia pseudomallei HNBP001 was knocked out by homologous recombinant gene knockout method, and the relA mutant was obtained. The growth, motility and biofilm phenotypes of Burkholderia pseudomallei HNBP001 were compared before and after the deletion of relA gene. Results: The relA mutant was successfully constructed. The growth rate, motility and biofilm formation of ΔrelA decreased. Conclusion: The modified plasmid TPR- pK18mobSacB can improve the knockout efficiency of HNBP001 strain, which can be widely used in the gene knockout of Burkholderia pseudomallei, and provide convenience for the laboratory to study the gene function of Burkholderia pseudomallei at the molecular level;The mutant of the relA gene inhibits the growth, motility and biofilm formation of HNBP001.
文摘The synthesis, preparation, chemical reactivities and biological activity of simple heterocyclic and heteropolycyclic nitrogen systems as small units as functional pyrazoles, pyridine and pyrimidine, and the related fused systems are reviewed. Among the various possible routes to the formation, isomeric structures have been cited because of patented reaching advanced phases of clinical trials, from 2000 to 2020.
基金This work was supported by the State "973" Programs from the Ministry of Science and Technology of China (No. 2006CB101900)Technology and the Project (No. 20050307028)+3 种基金from the Ministry of Education of China, the National Natural Science Foundation of China (No. 30671048 & No. 30671384)Jiangsu Provincial Program for Tackling Key Problems of Science and Technology (No. BG2006328)the Key Technology R & D program from the Ministry of Science and Technology of China (No. 2006BAE01A04-08)the state "863" programs from the Ministry of Science and Technology of China (No. 2006AA10A211).
文摘Twenty-two nitrate nonutilizing （nit） mutants were recovered from five wild-type isolates of Fusarium graminearum and fifty nit mutants were recovered from three JS399-19-resistant mutants of F. graminearum cultured on MMC medium. Some biological properties were compared between nit mutants and their parental isolates. The results showed that there were no significant differences in growth rate, cultural characters or pathogenicity between JS399-19-resistant nit mutants and their parental isolates. But the conidial production and the sexual reproduction ability changed to some extent. There was no cross resistance toward chlorate and JS399-19 in F. graminearum and the resistance could be stable through 20-time subcultures. Therefore, the nit could be used as a genetic marker for studying the genetics of JS399-19 resistance in E graminearum, which was used to study JS399-19 resistance transferability in hyphal fusion. Resistance in JS399-19 could not be transferred by hyphal fusion or could be transferred with low chance between two compatible isolates, which would delay the development of JS399-19 resistance in the field.
文摘OBJECTIVE To establish a murine uterine cervical cancer cell line and to define its biological characters. METHODS Transplanted tumor tissue was used for in vitro primary culture of U14 cervical carcinoma cells. After 20 passages, we examined its morphology, chromosomes, tumorigenicity and produced a growth curve. CK was detected by immunohistochemistry, the cell cycle determined by flow cytometry and the metastatic potential assessed in 615 and C57BL/c mice. We also transfected the cells with the pEGFP-N1 plasmid. RESULTS A newly established murine cell line was passaged 50 times over a period of 10 months. The cells grow as a partially suspended culture, and are immunohistochemically CK（＋）. The cell line is characterized by a hypotetraploid karyotype, a chromosomal number of 64-68 and a doubling time of 21.8 h. Exponential growth occurs by the third and forth day of culture. Cell cycle analysis showed G1 34%, G2 26%, and 40% in the S phase. The tumorigenicity was 100% upon implantation. No mycoplasma contamination was detected. A monoclonal continuous U14-GFP cell strain which was 100% GFP （＋） was also produced. CONCLUSION We successfully established a new murine cervical U14 carcinoma cell line and an U14-GFP monoclonal strain. These cell lines are ideal for combined in vivo and in vitro tumor research.
基金supported by National Natural Science Foundation of China(Grant No.51872197,81772363 and 81972076)Shanghai Committee of Science and Technology,China(Grant No.15411951000)。
文摘Magnesium(Mg) and its alloys have emerged as a favored candidate for bio-regenerative medical implants due to their superior biocompatibility, biodegradability and the elastic modulus close to that of human bone. Unfortunately, the rapid and uncontrollable degradation rate of Mg alloys in chloride-rich body microenvironments limits their clinical orthopedic applications. Recently, Calcium Phosphate(Ca-P)biomaterials, especially Hydroxyapatite(HA), have been broadly applied in the surface functional modification of metal-based biomaterials attributed to their excellent bioactivity and biocompatibility. Hydrothermal modification of Ca-P coatings on Mg alloys has been extensively exploited by researchers for its significant superiorities in controlling coating structure and improving interfacial bonding strength for better osseointegration and corrosion resistance. This work focuses on the up-to-the-minute advances in Ca-P coatings on the surface of Mg and its alloys via hydrothermal methods, including the strategies and mechanisms of hydrothermal modification. Herein, we are inclined to share some feasible and attractive hydrothermal surface modification strategies. From the perspectives of hydrothermal manufacturing technique innovation and coating structure optimization, we evaluate how to foster the corrosion resistance, coating bonding strength, osseointegration and antibacterial properties of Mg alloys with Ca-P coatings synthesized by hydrothermal method. The challenges and future perspectives on the follow-up exploration of Mg alloys for orthopedic applications are also elaborately proposed.
文摘Magnesium(Mg)and its alloys have become a hot research topic in various industries owing to the specific physical and chemical properties.However,high corrosion rate is considered the key lifetime-limiting.Plasma electrolytic oxidation(PEO)method is a simple strategy to deposit an oxide layer on the surface of light metals such as magnesium alloys,to control corrosion rate and promote some other properties,depending on their performances.Nevertheless,their features including their micropore size,distribution,and interconnectivity,and microcracks have not been improved to an acceptable level to support long-term performances of the magnesium-based substrates.Studies have introduced micro/nano-enabled approaches to enhance various properties of PEO coatings such as corrosion resistance,tribological properties,self-healing ability,bioactivity,biocompatibility,antibacterial properties,or catalytic performances.These strategies consist of incorporating of micro and nanoparticles into the PEO layers to produce multi-functional surfaces or the formation of multi-layered coatings to cover the defects of PEO coatings.In this perspective,the present paper aims to overview various nano/micro-enabled strategies to promote the properties of PEO coatings on magnesium alloys.The main focus is given to the functional changes that occurred in response to the incorporation of various types of nano/micro-structures into the PEO coatings on magnesium alloys.
基金This study was supported by United States Depart-ment of Agriculture (USDA), Grant No.: BG-ARS-123
文摘A study was conducted at two pair sites of Chittagong Hill Tracts in Bangladesh to find out the effects of shifting cultivation on soil fungi and bacterial population. The first pair of sites with shifting culti-vation and village common forest-managed by indigenous community was at Madhya Para in Rangamati district and the second pair of sites with the shifting cultivated land and village common forest at Ampu Para in Bandarban district of Chittagong Hill Tracts. At both the locations with two different land uses, soil textures in surface （0？10 cm） and sub-surface （10？20 cm） soils varied from sandy loam to sandy clay loam. Soil pH and moisture content were lower in shifting cultivated land com-pared to village common forest. The results also showed that both fungal and bacterial population in surface and subsurface soils was significantly （p ≤ 0.05） lower, in most cases, in shifting cultivated land compared to village common forest at both Madhya Para and Ampu Para. At Ranga-mati and Bandarban in shifting cultivated lands, Colletrotrichum and Fusarium fungi were absent and all the bacterial genus viz. Coccus, Bacillus and Streptococcus common in two different locations with dif-ferent land uses. Common identified fungi at both the land uses and locations were Aspergillus, Rhizopus, Trichoderma and Penicillium. Further study can be done on the other soil biota to understand the extent of environmental deterioration due to shifting cultivation.
