Light plays an important role in the photosynthesis and metabolic process of microalgae.However,how different light conditions regulate the biomass production and protein accumulation of microalgae is mostly unknown.I...Light plays an important role in the photosynthesis and metabolic process of microalgae.However,how different light conditions regulate the biomass production and protein accumulation of microalgae is mostly unknown.In this study,the influence of different light conditions,including light colors,densities,and light:dark cycles on the cell growth and biochemical composition of Spirulina platensis was symmetrically characterized.Under different colored lights,S.platensis all shows an increase trend within the increased light intensity ranges;however,each showing different optimal light intensities.At the same light intensity,different colored lights show different growth rate of S.platensis following the sequence of red>white>green>yellow>blue.The maximum growth rate and protein accumulation were determined as 21.88 and 5.10 mg/(L·d)when illuminated under red LED.The energy efficiency of different light sources was calculated and ranked as red>white>blue≈green>yellow.Transcriptomic analysis suggests that red light can promote cell growth and protein accumulation by upregulating genes related to photosynthesis,carbon fixation,and C-N metabolism pathways.This study provides a conducive and efficient way to promote biomass production and protein accumulation of S.platensis by regulating light conditions.展开更多
The paper proposes a biomass cross-upgrading process that combines hydrothermal carbonization and pyrolysis to produce high-quality blast furnace injection fuel.The results showed that after upgrading,the volatile con...The paper proposes a biomass cross-upgrading process that combines hydrothermal carbonization and pyrolysis to produce high-quality blast furnace injection fuel.The results showed that after upgrading,the volatile content of biochar ranged from 16.19%to 45.35%,and the alkali metal content,ash content,and specific surface area were significantly reduced.The optimal route for biochar pro-duction is hydrothermal carbonization-pyrolysis(P-HC),resulting in biochar with a higher calorific value,C=C structure,and increased graphitization degree.The apparent activation energy(E)of the sample ranges from 199.1 to 324.8 kJ/mol,with P-HC having an E of 277.8 kJ/mol,lower than that of raw biomass,primary biochar,and anthracite.This makes P-HC more suitable for blast furnace injection fuel.Additionally,the paper proposes a path for P-HC injection in blast furnaces and calculates potential environmental benefits.P-HC of-fers the highest potential for carbon emission reduction,capable of reducing emissions by 96.04 kg/t when replacing 40wt%coal injec-tion.展开更多
Differences in forest attributes and carbon sequestration of each organ and layer between broadleaved and conifer forests of central and outer urban areas are not well-defined,hindering the precise management of urban...Differences in forest attributes and carbon sequestration of each organ and layer between broadleaved and conifer forests of central and outer urban areas are not well-defined,hindering the precise management of urban forests and improvement of function.To clarify the effect of two forest types with different urbanization intensities,we determined differences in vegetation composition and diversity,structural traits,and carbon stocks of 152 plots(20 m×20 m)in urban park forests in Changchun,which had the largest green quantity and carbon density effectiveness.We found that 1.1-fold thicker and healthier trees,and 1.6-to 2.0-fold higher,healthier,denser,and more various shrubs but with sparser trees and herbs occurred in the central urban forests(p<0.05)than in the outer forests.The conifer forests exhibited 30–70%obviously higher tree aboveground carbon sequestration(including stem and leaf)and 20%bigger trees,especially in the outer forests(p<0.05).In contrast,1.1-to 1.5-fold higher branch stocks,healthier and more diverse trees were found in broadleaved forests of both the inner and outer forests(p<0.05).Plant size and dominant species had similarly important roles in carbon stock improvement,especially big-sized woody plants and Pinus tabuliformis.In addition,a higher number of deciduous or needle species positively affected the broadleaved forest of the central urban area and conifer forest of the outer urban area,respectively.These findings can be used to guide precise management and accelerate the improvement of urban carbon function in Northeast China in the future.展开更多
Renewable electrocatalytic upgrading of biomass feedstocks into valuable chemicals is one of the promising strategies to relieve the pressure of traditional energy-based systems.Through electrocatalytic carbon–carbon...Renewable electrocatalytic upgrading of biomass feedstocks into valuable chemicals is one of the promising strategies to relieve the pressure of traditional energy-based systems.Through electrocatalytic carbon–carbon bond cleavage of high selectivity,various functionalized molecules,such as organic acids,amides,esters,and nitriles,have great potential to be accessed from biomass.However,it has merely received finite concerns and interests in the biorefinery.This review first showcases the research progress on the electrocatalytic conversion of lipid/sugar-and lignin-derived molecules(e.g.,glycerol,mesoerythritol,xylose,glucose,1-phenylethanol,and cyclohexanol)into organic acids via specific carbon–carbon bond scission processes,with focus on disclosing reaction mechanisms,recognizing actual active species,and collecting feasible modification strategies.For the guidance of further extensive studies on biomass valorization,organic transformations via a variety of reactions,including decarboxylation,ring-opening,rearrangement,reductive hydrogenation,and carboxylation,are also disclosed for the construction of similar carbon skeletons/scaffolds.The remaining challenges,prospective applications,and future objectives in terms of biomass conversion are also proposed.This review is expected to provide references to develop renewed electrocatalytic carbon–carbon bond cleavage transformation paths/strategies for biomass upgrading.展开更多
Fe/N-based biomass porous carbon composite(Fe/N-p Carbon) was prepared by a facile high-temperature carbonization method from biomass,and the effect of Fe/N-p Carbon on the thermal decomposition of energetic molecular...Fe/N-based biomass porous carbon composite(Fe/N-p Carbon) was prepared by a facile high-temperature carbonization method from biomass,and the effect of Fe/N-p Carbon on the thermal decomposition of energetic molecular perovskite-based material DAP-4 was studied.Biomass porous carbonaceous materials was considered as the micro/nano support layers for in situ deposition of Fe/N precursors.Fe/Np Carbon was prepared simply by the high-temperature carbonization method.It was found that it showed the inherent catalysis properties for thermal decomposition of DAP-4.The heat release of DAP-4/Fe/N-p Carbon by DSC curves tested had increased slightly,compared from DAP-4/Fe/N-p Carbon-0.The decomposition temperature peak of DAP-4 at the presence of Fe/N-p Carbon had reduced by 79°C from384.4°C(pure DAP-4) to 305.4°C(DAP-4/Fe/N-p Carbon-3).The apparent activation energy of DAP-4thermal decomposition also had decreased by 29.1 J/mol.The possible catalytic decomposition mechanism of DAP-4 with Fe/N-p Carbon was proposed.展开更多
The rheological properties of nanocellulose aqueous suspensions play a critical role in the development of nanocellulose-based bulk materials.High-crystalline,high-aspect ratio,and slender nanofibrillated cellulose(NF...The rheological properties of nanocellulose aqueous suspensions play a critical role in the development of nanocellulose-based bulk materials.High-crystalline,high-aspect ratio,and slender nanofibrillated cellulose(NFC)were extracted from four biomass resources.The cellulose nanofibrils and nanofibril bundles formed inter-connected networks in the NFC aqueous suspensions.The storage moduli of the suspensions with different concentrations were higher than their corresponding loss moduli.As the concentration increased,the storage and loss modulus of NFC dispersion increased.When the shear rate increased to a certain value,there were differences in the changing trend of the rheological behavior of NFC aqueous suspensions derived from different biomass resources and the suspensions with different solid concentrations.NFC dispersion’s storage and loss modulus increased when the temperature rose to nearly 80℃.We hope this study can deepen the understanding of the rheological properties of NFC colloids derived from different biomass resources.展开更多
1 About the Special Issue Editor Qiaoguang Li is an associate professor and master’s supervisor in the Department of College of Chemistry and Chemical Engineering,Zhongkai University of Agriculture and Engineering.He...1 About the Special Issue Editor Qiaoguang Li is an associate professor and master’s supervisor in the Department of College of Chemistry and Chemical Engineering,Zhongkai University of Agriculture and Engineering.He received his PhD from Institute of Chemical Industry of Forestry Products,Chinese Academy of Forestry in 2018.He has been focusing his research on the chemical basis and application of natural resources.He has published nearly 30 international peer reviewed papers and applied for 10 patents.展开更多
Grassland biomass is an important parameter of grassland ecosystems.The complexity of the grassland canopy vegetation spectrum makes the long-term assessment of grassland growth a challenge.Few studies have explored t...Grassland biomass is an important parameter of grassland ecosystems.The complexity of the grassland canopy vegetation spectrum makes the long-term assessment of grassland growth a challenge.Few studies have explored the original spectral information of typical grasslands in Inner Mongolia and examined the influence of spectral information on aboveground biomass(AGB)estimation.In order to improve the accuracy of vegetation index inversion of grassland AGB,this study combined ground and Unmanned Aerial Vehicle(UAV)remote sensing technology and screened sensitive bands through ground hyperspectral data transformation and correlation analysis.The narrow band vegetation indices were calculated,and ground and airborne hyperspectral inversion models were established.Finally,the accuracy of the model was verified.The results showed that:(1)The vegetation indices constructed based on the ASD FieldSpec 4 and the UAV were significantly correlated with the dry and fresh weight of AGB.(2)The comparison between measured R^(2) with the prediction R^(2) indicated that the accuracy of the model was the best when using the Soil-Adjusted Vegetation Index(SAVI)as the independent variable in the analysis of AGB(fresh weight/dry weight)and four narrow-band vegetation indices.The SAVI vegetation index showed better applicability for biomass monitoring in typical grassland areas of Inner Mongolia.(3)The obtained ground and airborne hyperspectral data with the optimal vegetation index suggested that the dry weight of AGB has the best fitting effect with airborne hyperspectral data,where y=17.962e^(4.672x),the fitting R^(2) was 0.542,the prediction R^(2)was 0.424,and RMSE and REE were 57.03 and 0.65,respectively.Therefore,established vegetation indices by screening sensitive bands through hyperspectral feature analysis can significantly improve the inversion accuracy of typical grassland biomass in Inner Mongolia.Compared with ground monitoring,airborne hyperspectral monitoring better reflects the inversion of actual surface biomass.It provides a reliable modeling framework for grassland AGB monitoring and scientific and technological support for grazing management.展开更多
The operation of biomass treatment devices such as gasifiers is based on the control of key parameters that play an important role in product formation. These include: temperature, excess oxygen, relative humidity and...The operation of biomass treatment devices such as gasifiers is based on the control of key parameters that play an important role in product formation. These include: temperature, excess oxygen, relative humidity and biomass composition. This work focuses on excess oxygen and temperature. Unfortunately, flue gas oxygen analyzers are expensive and not accessible to small industries. However, the equivalence ratio is linked to excess oxygen and has the advantage of not depending on biomass composition. This study therefore focuses on the design and development of a device for controlling this equivalence ratio by measuring oxygen concentration using a self-propelled Lambda probe, and a system for monitoring this equivalence ratio using an Arduino Uno 3 microcontroller. The temperature is recorded with an accuracy of ±1.5°C. For a heating time of 10 minutes, the response time to temperature change is around 3 seconds, which is sufficient for the device to function properly. This simple device is an efficient and cost-effective means of checking the equivalence ratio.展开更多
This study examines the impact of different mangrove species on the structure and carbon storage potential of mangrove stands in Myanmar. We focused on three species: Avicennia officinalis, Avicennia marina and Brugui...This study examines the impact of different mangrove species on the structure and carbon storage potential of mangrove stands in Myanmar. We focused on three species: Avicennia officinalis, Avicennia marina and Bruguiera sexangula. These species were selected for their fast growth, ability to protect against cyclones, and effectiveness in coastal defense during mangrove restoration. To collect data on tree structure and carbon storage, we conducted field surveys measuring parameters such as diameter at breast height (DBH), tree height and crown diameter for each tree. Non-destructive methods were used for data collection. Using ANOVA and post-hoc multiple comparison tests, we assessed differences in structure and carbon stock among the three species. Regression analysis was also performed to understand the relationship between carbon stock and structural attributes. In terms of stand densities, we observed variations among species, with pioneer stage plantations exhibiting higher densities compared to mature stands. Seedlings showed sufficient regeneration, supporting the sustainability of the forest. Biomass accumulation varied across species, with A. officinalis having the highest average biomass. Aboveground biomass showed a strong correlation with basal area. A. officinalis had the highest total biomass carbon accumulation at 55.29 ± 20.91 Mg C ha<sup>-1</sup>, with 77.43% aboveground carbon and 22.57% belowground carbon. A. marina stored 41.09 ± 11.03 Mg C ha<sup>-1</sup>, with a similar distribution of 76.05% aboveground and 23.95% belowground carbon, while B. sexangula stored 23.23 ± 3.12 Mg C ha<sup>-1</sup>, with 70.70% aboveground carbon and 29.30% belowground carbon. The amount of aboveground carbon was a significant portion of the overall carbon storage and correlated with tree density, diameter, basal area and height. Our findings highlight the importance of selecting suitable species and considering structural attributes for mangrove restoration and carbon storage efforts. These results provide valuable insights for managing mangrove plantations at regional and global levels. On average, the reported carbon sequestration was 154.40 MgCO<sub>2</sub>-eq ha<sup>-1</sup>.展开更多
Subcanopy tree species are an important component of temperate secondary forests.However,their biomass equations are rarely reported,which forms a“vertical gap”between canopy tree species and understory shrub specie...Subcanopy tree species are an important component of temperate secondary forests.However,their biomass equations are rarely reported,which forms a“vertical gap”between canopy tree species and understory shrub species.In this study,we destructively sampled six common subcanopy species(Syringa reticulate var.amurensis(Rupr.)Pringle,Padus racemosa(Lam.)Gilib.,Acer ginnala Maxim.,Malus baccata(Linn.)Borkh.,Rhamnus davurica Pall.,and Maackia amurensis Rupr.et Maxim.)to establish biomass equations in a temperate forest of Northeast China.The mixed-species and species-specifi c biomass allometric equations were well fi tted against diameter at breast height(DBH).Adding tree height(H)as the second predictor increased the R^(2)of the models compared with the DBH-only models by–1%to+3%.The R^(2)of DBH-only and DBH-H equations for the total biomass of mixed-species were 0.985 and 0.986,respectively.On average,the biomass allocation proportions for the six species were in the order of stem(45.5%)>branch(30.1%)>belowground(19.5%)>foliage(4.9%),with a mean root:shoot ratio of 0.24.Biomass allocation to each specifi c component diff ered among species,which aff ected the performance of the mixed-species model for particular biomass component.When estimating the biomass of subcanopy species using the equations for canopy species(e.g.,Betula platyphylla Suk.,Ulmus davidiana var.japonica(Rehd.)Nakai,and Acer mono Maxim.),the errors in individual biomass estimation increased with tree size(up to 68.8%at 30 cm DBH),and the errors in stand biomass estimation(up to 19.2%)increased with increasing percentage of basal area shared by subcanopy species.The errors caused by selecting such inappropriate models could be removed by multiplying adjustment factors,which were usually power functions of DBH for biomass components.These results provide methodological support for accurate biomass estimation in temperate China and useful guidelines for biomass estimation for subcanopy species in other regions,which can help to improve estimates of forest biomass and carbon stocks.展开更多
In the search of alternative resources to make commodity chemicals and transportation fuels for a low carbon future,lignocellulosic biomass with over 180-billion-ton annual production rate has been identified as a pro...In the search of alternative resources to make commodity chemicals and transportation fuels for a low carbon future,lignocellulosic biomass with over 180-billion-ton annual production rate has been identified as a promising feedstock.This review focuses on the state-of-the-art catalytic transformation of lignocellulosic biomass into value-added chemicals and fuels.Following a brief introduction on the structure,major resources and pretreatment methods of lignocellulosic biomass,the catalytic conversion of three main components,i.e.,cellulose,hemicellulose and lignin,into various compounds are comprehensively discussed.Either in separate steps or in one-pot,cellulose and hemicellulose are hydrolyzed into sugars and upgraded into oxygen-containing chemicals such as 5-HMF,furfural,polyols,and organic acids,or even nitrogen-containing chemicals such as amino acids.On the other hand,lignin is first depolymerized into phenols,catechols,guaiacols,aldehydes and ketones,and then further transformed into hydrocarbon fuels,bioplastic precursors and bioactive compounds.The review then introduces the transformations of whole biomass via catalytic gasification,catalytic pyrolysis,as well as emerging strategies.Finally,opportunities,challenges and prospective of woody biomass valorization are highlighted.展开更多
The development of a selective catalyst for the conversion of biomass and plastics into H2by steam reforming can combat the energy crisis and global warming.In this work,support Ni-Fe-Ca/H-Al bifunctional catalysts we...The development of a selective catalyst for the conversion of biomass and plastics into H2by steam reforming can combat the energy crisis and global warming.In this work,support Ni-Fe-Ca/H-Al bifunctional catalysts were prepared by loading Ni and Fe into pretreatment CaO/Al_(2)O_(3)(Ca/H-Al)carriers and showed high catalytic activity for the steam reforming of biomass and plastic.Moreover,the idea of bidirectional degradation was exploited to strengthen the pyrolysis of plastic with a high H/C and biomass with a high O/C.Interestingly,the products presented high H2selective(1302.10 m L/g)and low CO_(2)yield(120.23 m L/g)in 7Ni-5Fe-Ca/H-Al(2:4)catalyst compared with current reports.Here,the abundant oxygen vacancies(Ov)in the H-Al carrier exhibited an electron-deficient nature,providing active sites for anchoring Ni O.Meanwhile,Ni O interacted with Ca_(2)Fe_(2)O_(5)to produce more defective Ovsites,which stabilized the NiO particles in the 7Ni-5Fe-Ca/H-Al(2:4)catalyst,and the interaction between the catalyst and the carrier was enhanced,leading to the reduction of weakly basic sites,this property promoted the strong adsorption of CO_(2)and H2O by the catalyst,contributing to the enhancement of efficient steam conversion and the promotion of conversion of by-products to H2.Notably,7Ni-5Fe-Ca/H-Al(2:4)catalysts maintained structural integrity after regeneration and exhibited excellent regenerability in H2selection and CO_(2)adsorption.The work provides a new idea for the study of efficient H2production from steam reforming of biomass and plastics.展开更多
PLA composites containing biomass fillers from the three herbaceous plants such as reed,wheat stalk,and coco-nut fiber with length and diameter at the scale of several millimeters were prepared without using additives...PLA composites containing biomass fillers from the three herbaceous plants such as reed,wheat stalk,and coco-nut fiber with length and diameter at the scale of several millimeters were prepared without using additives.The reinforcement effect on the properties of PLA/biomass filler composites is investigated.The research results show that the PLA/biomass filler composites exhibit good stiffness,flexural strength,and impact toughness.Among the three kinds of biomass fillers,reed reinforced PLA composites show optimal mechanical properties.When filled with 40%–50%reed,the flexural moduli of the composites are over 7000 MPa.Flexural strength retains at the same level of pure PLA.The notch impact strength reaches to 4.50±0.73 kJ/m^(2),which is 2.06 times higher than that of pure PLA.Furthermore,the introduction of biomass fillers increases the crystallization ability of PLA and does not increase the water absorption of the composites.This research demonstrated that PLA composites prepared with biomass fillers from the herbaceous plants(namely herb plastic composites,HPCs)is a material with good comprehensive mechanical properties while retaining the intrinsic particularity of biological sources.展开更多
Hydrothermal carbonization(HTC) of lignocellulosic biomass is a promising technology for the production of carbon materials with negative carbon emissions. However, the high reaction temperature and energy consumption...Hydrothermal carbonization(HTC) of lignocellulosic biomass is a promising technology for the production of carbon materials with negative carbon emissions. However, the high reaction temperature and energy consumption have limited the development of HTC technology. In conventional batch reactors, the temperature and pressure are typically coupled at saturated states. In this study, a decoupled temperature and pressure hydrothermal(DTPH) reaction system was developed to decrease the temperature of the HTC reaction of lignocellulosic biomass(rice straw and poplar leaves). The properties of hydrochars were analyzed by scanning electron microscopy(SEM), Fourier transform infrared(FTIR) spectroscopy, X-ray photoelectron spectroscopy(XPS), Raman spectroscopy, X-ray diffraction(XRD), thermogravimetric analyzer(TGA), etc. to propose the reaction mechanism. The results showed that the HTC reaction of lignocellulosic biomass could be realized at a low temperature of 200℃ in the DTPH process, breaking the temperature limit(230℃) in the conventional process. The DTPH method could break the barrier of the crystalline structure of cellulose in the lignocellulosic biomass with high cellulose content, realizing the carbonization of cellulose and hemicellulose with the dehydration, unsaturated bond formation, and aromatization. The produced hydrochar had an appearance of carbon microspheres, with high calorific values, abundant oxygen-containing functional groups, a certain degree of graphitization, and good thermal stability. Cellulose acts not only as a barrier to protect itself and hemicellulose from decomposition, but also as a key precursor for the formation of carbon microspheres. This study shows a promising method for synthesizing carbon materials from lignocellulosic biomass with a carbon-negative effect.展开更多
5-(Chloromethyl)furfural(CMF),as a new platform molecular,has become a hot topic in the field of biorefinery.Herein,the one-pot conversion of CMF to 2,5-bis(hydroxymethyl)furan(BHMF)in the water phase was demonstrated...5-(Chloromethyl)furfural(CMF),as a new platform molecular,has become a hot topic in the field of biorefinery.Herein,the one-pot conversion of CMF to 2,5-bis(hydroxymethyl)furan(BHMF)in the water phase was demonstrated for the first time.A 91%BHMF yield was obtained over Ru/Cu Oxcatalyst,and BHMF was mainly produced by the consecutive hydrolysis and hydrogenation of CMF with 5-hydroxymethylfurfural(HMF)as an intermediate.Kinetic studies revealed that the conversion of HMF to BHMF was the rate-determining step.Remarkably,the characterizations and density functional theory(DFT)calculations further revealed the lower electron density of Ru NPs in Ru/Cu Oxcatalyst,resulting in a larger adsorption energy and a smaller free energy difference for the formation of alcohols.The present findings offered a new pathway for biomass-derived diol production through CMF as a potential source.展开更多
Porous carbon(PC)is a promising electromagnetic(EM)wave absorbing material thanks to its light weight,large specific surface area as well as good dissipating capacity.To further improve its microwave absorbing perform...Porous carbon(PC)is a promising electromagnetic(EM)wave absorbing material thanks to its light weight,large specific surface area as well as good dissipating capacity.To further improve its microwave absorbing performance,silver coated porous carbon(Ag@PC)is synthesized by one-step hydro-thermal synthesis process making use of fir as a biomass formwork.Phase compositions,morphological structure,and microwave absorption capability of the Ag@PC has been explored.Research results show that the metallic Ag was successfully reduced and the particles are evenly distributed inward the pores of the carbon formwork,which accelerates graphitization process of the amorphous carbon.The Ag@PC composite without adding polyvinyl pyrrolidone(PVP)exhibits higher dielectric constant and better EM wave dissipating capability.This is because the larger particles of Ag give rise to higher electric conductivity.After combing with frequency selective surface(FSS),the EM wave absorbing performance is further improved and the frequency region below-10 d B is located in8.20-11.75 GHz,and the minimal reflection loss value is-22.5 dB.This work indicates that incorporating metallic Ag particles and FSS provides a valid way to strengthen EM wave absorbing capacity of PC material.展开更多
Visible light-driven valorization of biomass has recently been a pioneering field for nitrogen-containing heterocyclics syntheses due to its sustainable features.Herein,various aromatic ring-doped g-C_(3)N_(4) nanoshe...Visible light-driven valorization of biomass has recently been a pioneering field for nitrogen-containing heterocyclics syntheses due to its sustainable features.Herein,various aromatic ring-doped g-C_(3)N_(4) nanosheets(Ar-g-C_(3)N_(4);Ar=Py,Pm,Ph)were precisely designed to modulate their intrinsic electronic and band structure,which involves pyridine(Py),pyrimidine(Pm),and benzene(Ph)-doped g-C_(3)N_(4).Photocatalysts(CoPc/Ar-g-C_(3)N_(4)) of cobalt(II)phthalocyanine(CoPc)-fabricated Ar-g-C_(3)N_(4) were then developed for oxidative cyclization of furoin with 1,2-phenylenediamines for syntheses of various biomass-derived quinoxalines under visible-light irradiation.The catalytic activity(in terms of TOFs)of serial CoPc/Ar-g-C_(3)N_(4) samples increased with their transient photocurrents with CoPc/Py-g-C_(3)N_(4) as the most active one.For CoPc/Py-g-C_(3)N_(4),CoPc species functioned as both sensitizer and catalytic sites;while,doped Py led to a narrowed bandgap energy.Mechanism research further demonstrated that O_(2) was activated to superoxide radical(·O_(2)^(-)) by photoexcited high-level-energy electron(HLEE)transfer from Py-g-C_(3)N_(4) to CoPc for the subsequent aerobic oxidation.展开更多
Burning coal briquettes or biomass pellets in household decoupling stoves is of significance to the reduction of residential pollutant emissions such as NO and CO. In order to make full use of the superiority of decou...Burning coal briquettes or biomass pellets in household decoupling stoves is of significance to the reduction of residential pollutant emissions such as NO and CO. In order to make full use of the superiority of decoupling combustion technology, the household stoves should be specially designed and optimized to adapt to fuel types and combustion characteristics. Using numerical simulation and experimental validation, this study quantitatively clarified that the reducibility of devolatilization char plays an important role in the suppression of NO emission in the decoupling combustion of coal, while the reducibility of pyrolysis gases has a dominant effect on the reduction of NO in the decoupling combustion of biomass. An optimal parameter combination of throat height and grate angle was obtained for the simultaneous suppression of NO and CO emissions in the household decoupling stove burning coal briquettes. Two types of decoupling stoves were developed to enable the clean combustion of biomass pellets. The A-type biomass stove with a multi-pass smoke tunnel shows a better comprehensive NO and CO reduction effectiveness than the B-type biomass stove consisting of a two-stage grate structure and an S-shaped pyrolysis chamber. The optimal structural parameters provided references for the design and manufacture of commercial decoupling coal and biomass stoves.展开更多
Microbial fuel cell(MFC) is an advanced bioelectrochemical technique that can utilize biomass materials in the process of simultaneously generating electricity and biodegrading or bio transforming toxic pollutants fro...Microbial fuel cell(MFC) is an advanced bioelectrochemical technique that can utilize biomass materials in the process of simultaneously generating electricity and biodegrading or bio transforming toxic pollutants from wastewater. The overall performance of the system is largely dependent on the efficiency of the anode electrode to enhance electron transportation. Furthermore, the anode electrode has a significant impact on the overall cost of MFC setup. Hence, the need to explore research focused towards developing cost-effective material as anode in MFC. This material must also have favourable properties for electron transportation. Graphene oxide(GO) derivatives and its modification with nanomaterials have been identified as a viable anode material. Herein, we discussed an economically effective strategy for the synthesis of graphene derivatives from waste biomass materials and its subsequent fabrication into anode electrode for MFC applications. This review article offers a promising approach towards replacing commercial graphene materials with biomass-derived graphene derivatives in a view to achieve a sustainable and commercialized MFC.展开更多
基金the National Natural Science Foundation of China(Nos.42061134020,32070380)the Natural Science Foundation of Shandong Province(No.ZR2019ZD17)。
文摘Light plays an important role in the photosynthesis and metabolic process of microalgae.However,how different light conditions regulate the biomass production and protein accumulation of microalgae is mostly unknown.In this study,the influence of different light conditions,including light colors,densities,and light:dark cycles on the cell growth and biochemical composition of Spirulina platensis was symmetrically characterized.Under different colored lights,S.platensis all shows an increase trend within the increased light intensity ranges;however,each showing different optimal light intensities.At the same light intensity,different colored lights show different growth rate of S.platensis following the sequence of red>white>green>yellow>blue.The maximum growth rate and protein accumulation were determined as 21.88 and 5.10 mg/(L·d)when illuminated under red LED.The energy efficiency of different light sources was calculated and ranked as red>white>blue≈green>yellow.Transcriptomic analysis suggests that red light can promote cell growth and protein accumulation by upregulating genes related to photosynthesis,carbon fixation,and C-N metabolism pathways.This study provides a conducive and efficient way to promote biomass production and protein accumulation of S.platensis by regulating light conditions.
基金the National Key R&D Program of China(No.2022YFE0208100)the National Natural Science Foundation of China(No.5274316)+1 种基金the Key Research and Development Plan of Anhui Province,China(No.202210700037)the Major Science and Technology Project of Xinjiang Uygur Autonomous Region,China(No.2022A01003).
文摘The paper proposes a biomass cross-upgrading process that combines hydrothermal carbonization and pyrolysis to produce high-quality blast furnace injection fuel.The results showed that after upgrading,the volatile content of biochar ranged from 16.19%to 45.35%,and the alkali metal content,ash content,and specific surface area were significantly reduced.The optimal route for biochar pro-duction is hydrothermal carbonization-pyrolysis(P-HC),resulting in biochar with a higher calorific value,C=C structure,and increased graphitization degree.The apparent activation energy(E)of the sample ranges from 199.1 to 324.8 kJ/mol,with P-HC having an E of 277.8 kJ/mol,lower than that of raw biomass,primary biochar,and anthracite.This makes P-HC more suitable for blast furnace injection fuel.Additionally,the paper proposes a path for P-HC injection in blast furnaces and calculates potential environmental benefits.P-HC of-fers the highest potential for carbon emission reduction,capable of reducing emissions by 96.04 kg/t when replacing 40wt%coal injec-tion.
基金the Youth Growth Technology Project,Science and Technology Department of Jilin Province(20230508130RC)Bureau of Forestry and Landscaping of Changchun.
文摘Differences in forest attributes and carbon sequestration of each organ and layer between broadleaved and conifer forests of central and outer urban areas are not well-defined,hindering the precise management of urban forests and improvement of function.To clarify the effect of two forest types with different urbanization intensities,we determined differences in vegetation composition and diversity,structural traits,and carbon stocks of 152 plots(20 m×20 m)in urban park forests in Changchun,which had the largest green quantity and carbon density effectiveness.We found that 1.1-fold thicker and healthier trees,and 1.6-to 2.0-fold higher,healthier,denser,and more various shrubs but with sparser trees and herbs occurred in the central urban forests(p<0.05)than in the outer forests.The conifer forests exhibited 30–70%obviously higher tree aboveground carbon sequestration(including stem and leaf)and 20%bigger trees,especially in the outer forests(p<0.05).In contrast,1.1-to 1.5-fold higher branch stocks,healthier and more diverse trees were found in broadleaved forests of both the inner and outer forests(p<0.05).Plant size and dominant species had similarly important roles in carbon stock improvement,especially big-sized woody plants and Pinus tabuliformis.In addition,a higher number of deciduous or needle species positively affected the broadleaved forest of the central urban area and conifer forest of the outer urban area,respectively.These findings can be used to guide precise management and accelerate the improvement of urban carbon function in Northeast China in the future.
基金financially supported by the National Natural Science Foundation of China(22368014)the Guizhou Provincial S&T Project(ZK[2022]011,GCC[2023]011)+1 种基金the Guizhou Provincial Higher Education Institution Program(Qianjiaoji[2023]082)supported by RUDN University Strategic Academic Leadership Program。
文摘Renewable electrocatalytic upgrading of biomass feedstocks into valuable chemicals is one of the promising strategies to relieve the pressure of traditional energy-based systems.Through electrocatalytic carbon–carbon bond cleavage of high selectivity,various functionalized molecules,such as organic acids,amides,esters,and nitriles,have great potential to be accessed from biomass.However,it has merely received finite concerns and interests in the biorefinery.This review first showcases the research progress on the electrocatalytic conversion of lipid/sugar-and lignin-derived molecules(e.g.,glycerol,mesoerythritol,xylose,glucose,1-phenylethanol,and cyclohexanol)into organic acids via specific carbon–carbon bond scission processes,with focus on disclosing reaction mechanisms,recognizing actual active species,and collecting feasible modification strategies.For the guidance of further extensive studies on biomass valorization,organic transformations via a variety of reactions,including decarboxylation,ring-opening,rearrangement,reductive hydrogenation,and carboxylation,are also disclosed for the construction of similar carbon skeletons/scaffolds.The remaining challenges,prospective applications,and future objectives in terms of biomass conversion are also proposed.This review is expected to provide references to develop renewed electrocatalytic carbon–carbon bond cleavage transformation paths/strategies for biomass upgrading.
基金National Natural Science Foundation of China(Grant No.21975227)the Found of National defence Science and Technology Key Laboratory (Grant No.6142602210306)。
文摘Fe/N-based biomass porous carbon composite(Fe/N-p Carbon) was prepared by a facile high-temperature carbonization method from biomass,and the effect of Fe/N-p Carbon on the thermal decomposition of energetic molecular perovskite-based material DAP-4 was studied.Biomass porous carbonaceous materials was considered as the micro/nano support layers for in situ deposition of Fe/N precursors.Fe/Np Carbon was prepared simply by the high-temperature carbonization method.It was found that it showed the inherent catalysis properties for thermal decomposition of DAP-4.The heat release of DAP-4/Fe/N-p Carbon by DSC curves tested had increased slightly,compared from DAP-4/Fe/N-p Carbon-0.The decomposition temperature peak of DAP-4 at the presence of Fe/N-p Carbon had reduced by 79°C from384.4°C(pure DAP-4) to 305.4°C(DAP-4/Fe/N-p Carbon-3).The apparent activation energy of DAP-4thermal decomposition also had decreased by 29.1 J/mol.The possible catalytic decomposition mechanism of DAP-4 with Fe/N-p Carbon was proposed.
基金supported in part by the Fundamental Research Funds for the Central Universities(2572019BB03 and 2572021CG01)the Startup Fund and the Catalyst Fund from Rowan University and the Research Grant(PC 20-22)from the New Jersey Health Foundation from USA,and the Grant(DMR-2116353)from the National Science Foundation.
文摘The rheological properties of nanocellulose aqueous suspensions play a critical role in the development of nanocellulose-based bulk materials.High-crystalline,high-aspect ratio,and slender nanofibrillated cellulose(NFC)were extracted from four biomass resources.The cellulose nanofibrils and nanofibril bundles formed inter-connected networks in the NFC aqueous suspensions.The storage moduli of the suspensions with different concentrations were higher than their corresponding loss moduli.As the concentration increased,the storage and loss modulus of NFC dispersion increased.When the shear rate increased to a certain value,there were differences in the changing trend of the rheological behavior of NFC aqueous suspensions derived from different biomass resources and the suspensions with different solid concentrations.NFC dispersion’s storage and loss modulus increased when the temperature rose to nearly 80℃.We hope this study can deepen the understanding of the rheological properties of NFC colloids derived from different biomass resources.
基金supported by the National Natural Science Foundation of China (Grant No.32101475)Scarce and Quality Economic Forest Engineering Technology Research Center (Grant No.2022GCZX002)the Key Lab.of Biomass Energy and Material,Jiangsu Province (Grant No.JSBEM-S-202305).
文摘1 About the Special Issue Editor Qiaoguang Li is an associate professor and master’s supervisor in the Department of College of Chemistry and Chemical Engineering,Zhongkai University of Agriculture and Engineering.He received his PhD from Institute of Chemical Industry of Forestry Products,Chinese Academy of Forestry in 2018.He has been focusing his research on the chemical basis and application of natural resources.He has published nearly 30 international peer reviewed papers and applied for 10 patents.
基金This study was supported by the Basic Research Business Fee Project of Universities Directly under the Inner Mongolia Autonomous Region(JY20220108)the Inner Mongolia Autonomous Region Natural Science Foundation Project(2022LHMS03006)+1 种基金the Inner Mongolia University of Technology Doctoral Research Initiation Fund Project(DC2300001284)the Inner Mongolia Autonomous Region Natural Science Foundation Project(2021MS03082).
文摘Grassland biomass is an important parameter of grassland ecosystems.The complexity of the grassland canopy vegetation spectrum makes the long-term assessment of grassland growth a challenge.Few studies have explored the original spectral information of typical grasslands in Inner Mongolia and examined the influence of spectral information on aboveground biomass(AGB)estimation.In order to improve the accuracy of vegetation index inversion of grassland AGB,this study combined ground and Unmanned Aerial Vehicle(UAV)remote sensing technology and screened sensitive bands through ground hyperspectral data transformation and correlation analysis.The narrow band vegetation indices were calculated,and ground and airborne hyperspectral inversion models were established.Finally,the accuracy of the model was verified.The results showed that:(1)The vegetation indices constructed based on the ASD FieldSpec 4 and the UAV were significantly correlated with the dry and fresh weight of AGB.(2)The comparison between measured R^(2) with the prediction R^(2) indicated that the accuracy of the model was the best when using the Soil-Adjusted Vegetation Index(SAVI)as the independent variable in the analysis of AGB(fresh weight/dry weight)and four narrow-band vegetation indices.The SAVI vegetation index showed better applicability for biomass monitoring in typical grassland areas of Inner Mongolia.(3)The obtained ground and airborne hyperspectral data with the optimal vegetation index suggested that the dry weight of AGB has the best fitting effect with airborne hyperspectral data,where y=17.962e^(4.672x),the fitting R^(2) was 0.542,the prediction R^(2)was 0.424,and RMSE and REE were 57.03 and 0.65,respectively.Therefore,established vegetation indices by screening sensitive bands through hyperspectral feature analysis can significantly improve the inversion accuracy of typical grassland biomass in Inner Mongolia.Compared with ground monitoring,airborne hyperspectral monitoring better reflects the inversion of actual surface biomass.It provides a reliable modeling framework for grassland AGB monitoring and scientific and technological support for grazing management.
文摘The operation of biomass treatment devices such as gasifiers is based on the control of key parameters that play an important role in product formation. These include: temperature, excess oxygen, relative humidity and biomass composition. This work focuses on excess oxygen and temperature. Unfortunately, flue gas oxygen analyzers are expensive and not accessible to small industries. However, the equivalence ratio is linked to excess oxygen and has the advantage of not depending on biomass composition. This study therefore focuses on the design and development of a device for controlling this equivalence ratio by measuring oxygen concentration using a self-propelled Lambda probe, and a system for monitoring this equivalence ratio using an Arduino Uno 3 microcontroller. The temperature is recorded with an accuracy of ±1.5°C. For a heating time of 10 minutes, the response time to temperature change is around 3 seconds, which is sufficient for the device to function properly. This simple device is an efficient and cost-effective means of checking the equivalence ratio.
文摘This study examines the impact of different mangrove species on the structure and carbon storage potential of mangrove stands in Myanmar. We focused on three species: Avicennia officinalis, Avicennia marina and Bruguiera sexangula. These species were selected for their fast growth, ability to protect against cyclones, and effectiveness in coastal defense during mangrove restoration. To collect data on tree structure and carbon storage, we conducted field surveys measuring parameters such as diameter at breast height (DBH), tree height and crown diameter for each tree. Non-destructive methods were used for data collection. Using ANOVA and post-hoc multiple comparison tests, we assessed differences in structure and carbon stock among the three species. Regression analysis was also performed to understand the relationship between carbon stock and structural attributes. In terms of stand densities, we observed variations among species, with pioneer stage plantations exhibiting higher densities compared to mature stands. Seedlings showed sufficient regeneration, supporting the sustainability of the forest. Biomass accumulation varied across species, with A. officinalis having the highest average biomass. Aboveground biomass showed a strong correlation with basal area. A. officinalis had the highest total biomass carbon accumulation at 55.29 ± 20.91 Mg C ha<sup>-1</sup>, with 77.43% aboveground carbon and 22.57% belowground carbon. A. marina stored 41.09 ± 11.03 Mg C ha<sup>-1</sup>, with a similar distribution of 76.05% aboveground and 23.95% belowground carbon, while B. sexangula stored 23.23 ± 3.12 Mg C ha<sup>-1</sup>, with 70.70% aboveground carbon and 29.30% belowground carbon. The amount of aboveground carbon was a significant portion of the overall carbon storage and correlated with tree density, diameter, basal area and height. Our findings highlight the importance of selecting suitable species and considering structural attributes for mangrove restoration and carbon storage efforts. These results provide valuable insights for managing mangrove plantations at regional and global levels. On average, the reported carbon sequestration was 154.40 MgCO<sub>2</sub>-eq ha<sup>-1</sup>.
基金supported by the National Key Research and Development Program(2021YFD220040105)National Natural Science Foundation of China(32171765).
文摘Subcanopy tree species are an important component of temperate secondary forests.However,their biomass equations are rarely reported,which forms a“vertical gap”between canopy tree species and understory shrub species.In this study,we destructively sampled six common subcanopy species(Syringa reticulate var.amurensis(Rupr.)Pringle,Padus racemosa(Lam.)Gilib.,Acer ginnala Maxim.,Malus baccata(Linn.)Borkh.,Rhamnus davurica Pall.,and Maackia amurensis Rupr.et Maxim.)to establish biomass equations in a temperate forest of Northeast China.The mixed-species and species-specifi c biomass allometric equations were well fi tted against diameter at breast height(DBH).Adding tree height(H)as the second predictor increased the R^(2)of the models compared with the DBH-only models by–1%to+3%.The R^(2)of DBH-only and DBH-H equations for the total biomass of mixed-species were 0.985 and 0.986,respectively.On average,the biomass allocation proportions for the six species were in the order of stem(45.5%)>branch(30.1%)>belowground(19.5%)>foliage(4.9%),with a mean root:shoot ratio of 0.24.Biomass allocation to each specifi c component diff ered among species,which aff ected the performance of the mixed-species model for particular biomass component.When estimating the biomass of subcanopy species using the equations for canopy species(e.g.,Betula platyphylla Suk.,Ulmus davidiana var.japonica(Rehd.)Nakai,and Acer mono Maxim.),the errors in individual biomass estimation increased with tree size(up to 68.8%at 30 cm DBH),and the errors in stand biomass estimation(up to 19.2%)increased with increasing percentage of basal area shared by subcanopy species.The errors caused by selecting such inappropriate models could be removed by multiplying adjustment factors,which were usually power functions of DBH for biomass components.These results provide methodological support for accurate biomass estimation in temperate China and useful guidelines for biomass estimation for subcanopy species in other regions,which can help to improve estimates of forest biomass and carbon stocks.
文摘In the search of alternative resources to make commodity chemicals and transportation fuels for a low carbon future,lignocellulosic biomass with over 180-billion-ton annual production rate has been identified as a promising feedstock.This review focuses on the state-of-the-art catalytic transformation of lignocellulosic biomass into value-added chemicals and fuels.Following a brief introduction on the structure,major resources and pretreatment methods of lignocellulosic biomass,the catalytic conversion of three main components,i.e.,cellulose,hemicellulose and lignin,into various compounds are comprehensively discussed.Either in separate steps or in one-pot,cellulose and hemicellulose are hydrolyzed into sugars and upgraded into oxygen-containing chemicals such as 5-HMF,furfural,polyols,and organic acids,or even nitrogen-containing chemicals such as amino acids.On the other hand,lignin is first depolymerized into phenols,catechols,guaiacols,aldehydes and ketones,and then further transformed into hydrocarbon fuels,bioplastic precursors and bioactive compounds.The review then introduces the transformations of whole biomass via catalytic gasification,catalytic pyrolysis,as well as emerging strategies.Finally,opportunities,challenges and prospective of woody biomass valorization are highlighted.
基金the National Natural Science of China(21968037)the Reserve Program for Young and Middle-aged Academic and Technical Leaders in Yunnan Province(202205AC160031)+1 种基金the Research Innovation Project of Yunnan University for Graduate Students on Exemption,the Highlevel Talent Promotion and Training Project of Kunming(2022SCP003)advanced analysis and measurement center of Yunnan university for the sample testing service。
文摘The development of a selective catalyst for the conversion of biomass and plastics into H2by steam reforming can combat the energy crisis and global warming.In this work,support Ni-Fe-Ca/H-Al bifunctional catalysts were prepared by loading Ni and Fe into pretreatment CaO/Al_(2)O_(3)(Ca/H-Al)carriers and showed high catalytic activity for the steam reforming of biomass and plastic.Moreover,the idea of bidirectional degradation was exploited to strengthen the pyrolysis of plastic with a high H/C and biomass with a high O/C.Interestingly,the products presented high H2selective(1302.10 m L/g)and low CO_(2)yield(120.23 m L/g)in 7Ni-5Fe-Ca/H-Al(2:4)catalyst compared with current reports.Here,the abundant oxygen vacancies(Ov)in the H-Al carrier exhibited an electron-deficient nature,providing active sites for anchoring Ni O.Meanwhile,Ni O interacted with Ca_(2)Fe_(2)O_(5)to produce more defective Ovsites,which stabilized the NiO particles in the 7Ni-5Fe-Ca/H-Al(2:4)catalyst,and the interaction between the catalyst and the carrier was enhanced,leading to the reduction of weakly basic sites,this property promoted the strong adsorption of CO_(2)and H2O by the catalyst,contributing to the enhancement of efficient steam conversion and the promotion of conversion of by-products to H2.Notably,7Ni-5Fe-Ca/H-Al(2:4)catalysts maintained structural integrity after regeneration and exhibited excellent regenerability in H2selection and CO_(2)adsorption.The work provides a new idea for the study of efficient H2production from steam reforming of biomass and plastics.
基金supported by“One Belt,One Road”Projects of China Academy of Sciences(174433KYSB20190082)Science and Technology Service Network Plan of China Academy of Sciences(KFJ-STS-QYZD-2021-16-002)+2 种基金Key Projects of Ningbo Public Welfare Science and Technology Plan(2021S020)Ningbo Natural Science Foundation(2021J196)Youth Innovation Promotion Association CAS(2017339).
文摘PLA composites containing biomass fillers from the three herbaceous plants such as reed,wheat stalk,and coco-nut fiber with length and diameter at the scale of several millimeters were prepared without using additives.The reinforcement effect on the properties of PLA/biomass filler composites is investigated.The research results show that the PLA/biomass filler composites exhibit good stiffness,flexural strength,and impact toughness.Among the three kinds of biomass fillers,reed reinforced PLA composites show optimal mechanical properties.When filled with 40%–50%reed,the flexural moduli of the composites are over 7000 MPa.Flexural strength retains at the same level of pure PLA.The notch impact strength reaches to 4.50±0.73 kJ/m^(2),which is 2.06 times higher than that of pure PLA.Furthermore,the introduction of biomass fillers increases the crystallization ability of PLA and does not increase the water absorption of the composites.This research demonstrated that PLA composites prepared with biomass fillers from the herbaceous plants(namely herb plastic composites,HPCs)is a material with good comprehensive mechanical properties while retaining the intrinsic particularity of biological sources.
基金The financial support from the Key-Area Research and Development Program of Guangdong Province (2020B1111380001)the Beijing Municipal Natural Science Foundation (2222012)+1 种基金the National Natural Science Foundation of China (Grant No.52070116)the Tsinghua University-Shanxi Clean Energy Research Institute Innovation Project Seed Fund。
文摘Hydrothermal carbonization(HTC) of lignocellulosic biomass is a promising technology for the production of carbon materials with negative carbon emissions. However, the high reaction temperature and energy consumption have limited the development of HTC technology. In conventional batch reactors, the temperature and pressure are typically coupled at saturated states. In this study, a decoupled temperature and pressure hydrothermal(DTPH) reaction system was developed to decrease the temperature of the HTC reaction of lignocellulosic biomass(rice straw and poplar leaves). The properties of hydrochars were analyzed by scanning electron microscopy(SEM), Fourier transform infrared(FTIR) spectroscopy, X-ray photoelectron spectroscopy(XPS), Raman spectroscopy, X-ray diffraction(XRD), thermogravimetric analyzer(TGA), etc. to propose the reaction mechanism. The results showed that the HTC reaction of lignocellulosic biomass could be realized at a low temperature of 200℃ in the DTPH process, breaking the temperature limit(230℃) in the conventional process. The DTPH method could break the barrier of the crystalline structure of cellulose in the lignocellulosic biomass with high cellulose content, realizing the carbonization of cellulose and hemicellulose with the dehydration, unsaturated bond formation, and aromatization. The produced hydrochar had an appearance of carbon microspheres, with high calorific values, abundant oxygen-containing functional groups, a certain degree of graphitization, and good thermal stability. Cellulose acts not only as a barrier to protect itself and hemicellulose from decomposition, but also as a key precursor for the formation of carbon microspheres. This study shows a promising method for synthesizing carbon materials from lignocellulosic biomass with a carbon-negative effect.
基金financially supported by the National Key R&D Program of China 2021YFC2101604)the National Natural Science Foundation of China(22278339,21978248)+1 种基金the Guangdong Provincial Key Research and Development Program(2020B0101070001)the Natural Science Foundation of Fujian Province of China(2019J06005)。
文摘5-(Chloromethyl)furfural(CMF),as a new platform molecular,has become a hot topic in the field of biorefinery.Herein,the one-pot conversion of CMF to 2,5-bis(hydroxymethyl)furan(BHMF)in the water phase was demonstrated for the first time.A 91%BHMF yield was obtained over Ru/Cu Oxcatalyst,and BHMF was mainly produced by the consecutive hydrolysis and hydrogenation of CMF with 5-hydroxymethylfurfural(HMF)as an intermediate.Kinetic studies revealed that the conversion of HMF to BHMF was the rate-determining step.Remarkably,the characterizations and density functional theory(DFT)calculations further revealed the lower electron density of Ru NPs in Ru/Cu Oxcatalyst,resulting in a larger adsorption energy and a smaller free energy difference for the formation of alcohols.The present findings offered a new pathway for biomass-derived diol production through CMF as a potential source.
基金supported by National Natural Science Foundation of China(No.52103361)Shaanxi University Youth Outstanding Talents Support Plan,Scientific and Technological Plan Project of Xi’an Beilin District(No.GX2143)。
文摘Porous carbon(PC)is a promising electromagnetic(EM)wave absorbing material thanks to its light weight,large specific surface area as well as good dissipating capacity.To further improve its microwave absorbing performance,silver coated porous carbon(Ag@PC)is synthesized by one-step hydro-thermal synthesis process making use of fir as a biomass formwork.Phase compositions,morphological structure,and microwave absorption capability of the Ag@PC has been explored.Research results show that the metallic Ag was successfully reduced and the particles are evenly distributed inward the pores of the carbon formwork,which accelerates graphitization process of the amorphous carbon.The Ag@PC composite without adding polyvinyl pyrrolidone(PVP)exhibits higher dielectric constant and better EM wave dissipating capability.This is because the larger particles of Ag give rise to higher electric conductivity.After combing with frequency selective surface(FSS),the EM wave absorbing performance is further improved and the frequency region below-10 d B is located in8.20-11.75 GHz,and the minimal reflection loss value is-22.5 dB.This work indicates that incorporating metallic Ag particles and FSS provides a valid way to strengthen EM wave absorbing capacity of PC material.
基金supported by the National Natural Science Foundation of China(22075104)the Youth Science and Technology Innovation Talent of Guangdong TeZhi Plan,China(2019TQ05L111)+1 种基金Innovation Team Project in Guangdong Colleges and Universities,China(2021KCXTD009)Educational Commission of Guangdong Province of China(2021ZDZX4037)。
文摘Visible light-driven valorization of biomass has recently been a pioneering field for nitrogen-containing heterocyclics syntheses due to its sustainable features.Herein,various aromatic ring-doped g-C_(3)N_(4) nanosheets(Ar-g-C_(3)N_(4);Ar=Py,Pm,Ph)were precisely designed to modulate their intrinsic electronic and band structure,which involves pyridine(Py),pyrimidine(Pm),and benzene(Ph)-doped g-C_(3)N_(4).Photocatalysts(CoPc/Ar-g-C_(3)N_(4)) of cobalt(II)phthalocyanine(CoPc)-fabricated Ar-g-C_(3)N_(4) were then developed for oxidative cyclization of furoin with 1,2-phenylenediamines for syntheses of various biomass-derived quinoxalines under visible-light irradiation.The catalytic activity(in terms of TOFs)of serial CoPc/Ar-g-C_(3)N_(4) samples increased with their transient photocurrents with CoPc/Py-g-C_(3)N_(4) as the most active one.For CoPc/Py-g-C_(3)N_(4),CoPc species functioned as both sensitizer and catalytic sites;while,doped Py led to a narrowed bandgap energy.Mechanism research further demonstrated that O_(2) was activated to superoxide radical(·O_(2)^(-)) by photoexcited high-level-energy electron(HLEE)transfer from Py-g-C_(3)N_(4) to CoPc for the subsequent aerobic oxidation.
基金financial supports from the “Transformational Technologies for Clean Energy and Demonstration”, Strategic Priority Research Program of Chinese Academy of Sciences (XDA21040400)。
文摘Burning coal briquettes or biomass pellets in household decoupling stoves is of significance to the reduction of residential pollutant emissions such as NO and CO. In order to make full use of the superiority of decoupling combustion technology, the household stoves should be specially designed and optimized to adapt to fuel types and combustion characteristics. Using numerical simulation and experimental validation, this study quantitatively clarified that the reducibility of devolatilization char plays an important role in the suppression of NO emission in the decoupling combustion of coal, while the reducibility of pyrolysis gases has a dominant effect on the reduction of NO in the decoupling combustion of biomass. An optimal parameter combination of throat height and grate angle was obtained for the simultaneous suppression of NO and CO emissions in the household decoupling stove burning coal briquettes. Two types of decoupling stoves were developed to enable the clean combustion of biomass pellets. The A-type biomass stove with a multi-pass smoke tunnel shows a better comprehensive NO and CO reduction effectiveness than the B-type biomass stove consisting of a two-stage grate structure and an S-shaped pyrolysis chamber. The optimal structural parameters provided references for the design and manufacture of commercial decoupling coal and biomass stoves.
基金supported by the National Research Foundation of Korea (NRF) grant funded by the Korea government (MSIT) (2021R1A2B5B01002656)。
文摘Microbial fuel cell(MFC) is an advanced bioelectrochemical technique that can utilize biomass materials in the process of simultaneously generating electricity and biodegrading or bio transforming toxic pollutants from wastewater. The overall performance of the system is largely dependent on the efficiency of the anode electrode to enhance electron transportation. Furthermore, the anode electrode has a significant impact on the overall cost of MFC setup. Hence, the need to explore research focused towards developing cost-effective material as anode in MFC. This material must also have favourable properties for electron transportation. Graphene oxide(GO) derivatives and its modification with nanomaterials have been identified as a viable anode material. Herein, we discussed an economically effective strategy for the synthesis of graphene derivatives from waste biomass materials and its subsequent fabrication into anode electrode for MFC applications. This review article offers a promising approach towards replacing commercial graphene materials with biomass-derived graphene derivatives in a view to achieve a sustainable and commercialized MFC.
