Bridgeless single-stage converters are used for efficient(alternative current)AC-(direct current)DC conversion.These converters control generators,likeelectromagnetic meso-and micro-scale generators with low voltage.P...Bridgeless single-stage converters are used for efficient(alternative current)AC-(direct current)DC conversion.These converters control generators,likeelectromagnetic meso-and micro-scale generators with low voltage.Power factorcorrection helps increase the factor of the power supply.The main advantage ofthe power factor is it shapes the input current for increasing the real power of theAC supply.In this paper,a two-switch bridgeless rectifier topology is designedwith a power factor correction capability.For the proposed converter topologyto have good power quality parameters,the closed loop scheme,which uses thegrey wolf optimization(GWO)algorithm,is implemented.The successes ofGWO encourage this research to implement GWO in the topology.The performanceof the proposed topology is analyzed under different load conditions.Simulation is carried out using the MATLAB/Simulink environment,and theresults are compared with those of conventional(proportional integral derivative)PID and(particle swarm optimization)PSO controllers.To validate the simulation results,a 350-W hardware prototype is implemented,and the voltage ripple,efficiency,and power factor under different load conditions are analyzed and tabulated.The comparative study clearly indicates that the proposed convertertopology with a closed loop control scheme using the GWO algorithm improves the power factor to 0.9732 and reduces the voltage ripple to 0.12%with a conversion efficiency of 98.25%.展开更多
This paper presents a power factor corrected (PFC) new bridgeless (BL) Cuk Topologies for low power applications. A BL configuration of Cuk converter is proposed which eliminates the usage of diode bridge rectifier at...This paper presents a power factor corrected (PFC) new bridgeless (BL) Cuk Topologies for low power applications. A BL configuration of Cuk converter is proposed which eliminates the usage of diode bridge rectifier at the front end of the PFC converter, thus reducing the switching and conduction losses coupled with it. This new BL Cuk converter has two semiconductors switches. The current flow during each switching cycle interval of the converter reduces the conduction losses compared to the conventional Cuk PFC converter. It also reduces the input current ripple and Electromagnetic Interference (EMI). The inrush current during the starting period is limited and the input, output currents of the converter are continuous with minimum current ripple. Hence it is preferred mostly compared to other PFC circuits. The proposed topology works in the Discontinuous Conduction Mode (DCM) with simple control circuitry to achieve almost a unity power factor with less distortion in the input AC current. The switching of the power switches is done under zero current. The proposed PFC topologies are theoretically investigated and performance comparisons are made with the conventional rectifiers. The proposed PFC converter is simulated in MATLAB/SIMULINK with Fuzzy Logic Controller (FLC) and results are demonstrated to evaluate the effectiveness of the controller.展开更多
In this study,a type of multilevel flying capacitor bridgeless PFC converter is proposed that permits the use of economical and efficient 100 V GaN transistors.Compared with the popular two-level totem-pole bridgeless...In this study,a type of multilevel flying capacitor bridgeless PFC converter is proposed that permits the use of economical and efficient 100 V GaN transistors.Compared with the popular two-level totem-pole bridgeless PFC converters achieved using the much more expensive 650 V GaN devices,this new design has several distinct advantages:lower component costs,lower dv/dt,lower power losses,and reduced concerns about device reliability.A 1.6 kW,5-level PFC converter prototype is designed and fabricated with an efficiency of 99.18%and a power factor of 0.99,which are experimentally demonstrated.The operation principle,design considerations,control strategy and experimental results are discussed.展开更多
The Power Factor Correction(PFC)in Switched Reluctance(SR)motor is discussed in this article.The SR motors are applicable for multiple applications like electric vehicles,wind mills,machineries etc.The doubly salient ...The Power Factor Correction(PFC)in Switched Reluctance(SR)motor is discussed in this article.The SR motors are applicable for multiple applications like electric vehicles,wind mills,machineries etc.The doubly salient structure of SR motor causes the occurrence of torque ripples,which affects the power factor of the motor.To improve the power quality,the power factor has to be corrected and the ripples have to be minimized.In order to achieve these objectives,a novel power factor correction(PFC)method is proposed in this work.Here,the conventional Diode Bridge Rectifier(DBR)is replaced by a Bridgeless Hybrid Resonant(HR)converter,which assists in improvising the output in a wider range.The converter is chosen because of having variety of beneficial measures including high gain.The converter’s output is fed to the SR motor by means of an asymmetric Bridge Resonant(BR)converter.The proposed converter operates in continuous mode of conduction with the switching frequency of 10 KHz.A hysteresis current controller and Proportional Integral(PI)controller are utilized for reducing the harmonics in the source current along with the regulation of output voltage.In addition,the speed control of SR motor is accomplished by means of the Whale Optimization Algorithm(WOA)assisted PI controller.The proposed methodology is effective for the control of unity power factor,torque and current ripples.The Total Harmonic Distortion(THD)of the source current is also minimized,which suits the standard of International Electrotechnical Comission IEC 61000-3-2.By this methodology,the power factor of 0.99 is achieved with 97%efficiency and 3.92%THD.The proposed methodology is validated in simulation by MATLAB and in hardware by FPGA Spartan 6E.展开更多
Aiming at the problems of output voltage fluctuation and current total harmonic distortion(THD)in the front stage totem-pole bridgeless PFC of two-stage V2G(Vehicle to Grid)vehicle-mounted bi-directional converter,a f...Aiming at the problems of output voltage fluctuation and current total harmonic distortion(THD)in the front stage totem-pole bridgeless PFC of two-stage V2G(Vehicle to Grid)vehicle-mounted bi-directional converter,a fuzzy linear active disturbance rejection control strategy for V2G front-stage AC-DC power conversion system is proposed.Firstly,the topologicalworkingmode of the totem-pole bridgeless PFC is analyzed,and themathematical model is established.Combined with the system model and the linear active disturbance rejection theory,a double closed-loop controller is designed with the second-order linear active disturbance rejection control as the voltage outer loop and PI control as the current inner loop.The controller can realize self-adaptive tuning of the proportional gain coefficient of the active disturbance rejection controller through fuzzy reasoning and realize self-adaptive control.Simulation and experimental results show that this method can better solve the problems of slow system response and high total harmonic distortion rate of input current and effectively improve the system’s robustness.展开更多
文摘Bridgeless single-stage converters are used for efficient(alternative current)AC-(direct current)DC conversion.These converters control generators,likeelectromagnetic meso-and micro-scale generators with low voltage.Power factorcorrection helps increase the factor of the power supply.The main advantage ofthe power factor is it shapes the input current for increasing the real power of theAC supply.In this paper,a two-switch bridgeless rectifier topology is designedwith a power factor correction capability.For the proposed converter topologyto have good power quality parameters,the closed loop scheme,which uses thegrey wolf optimization(GWO)algorithm,is implemented.The successes ofGWO encourage this research to implement GWO in the topology.The performanceof the proposed topology is analyzed under different load conditions.Simulation is carried out using the MATLAB/Simulink environment,and theresults are compared with those of conventional(proportional integral derivative)PID and(particle swarm optimization)PSO controllers.To validate the simulation results,a 350-W hardware prototype is implemented,and the voltage ripple,efficiency,and power factor under different load conditions are analyzed and tabulated.The comparative study clearly indicates that the proposed convertertopology with a closed loop control scheme using the GWO algorithm improves the power factor to 0.9732 and reduces the voltage ripple to 0.12%with a conversion efficiency of 98.25%.
文摘This paper presents a power factor corrected (PFC) new bridgeless (BL) Cuk Topologies for low power applications. A BL configuration of Cuk converter is proposed which eliminates the usage of diode bridge rectifier at the front end of the PFC converter, thus reducing the switching and conduction losses coupled with it. This new BL Cuk converter has two semiconductors switches. The current flow during each switching cycle interval of the converter reduces the conduction losses compared to the conventional Cuk PFC converter. It also reduces the input current ripple and Electromagnetic Interference (EMI). The inrush current during the starting period is limited and the input, output currents of the converter are continuous with minimum current ripple. Hence it is preferred mostly compared to other PFC circuits. The proposed topology works in the Discontinuous Conduction Mode (DCM) with simple control circuitry to achieve almost a unity power factor with less distortion in the input AC current. The switching of the power switches is done under zero current. The proposed PFC topologies are theoretically investigated and performance comparisons are made with the conventional rectifiers. The proposed PFC converter is simulated in MATLAB/SIMULINK with Fuzzy Logic Controller (FLC) and results are demonstrated to evaluate the effectiveness of the controller.
基金Supported by the National Natural Science Foundation of China(51977068).
文摘In this study,a type of multilevel flying capacitor bridgeless PFC converter is proposed that permits the use of economical and efficient 100 V GaN transistors.Compared with the popular two-level totem-pole bridgeless PFC converters achieved using the much more expensive 650 V GaN devices,this new design has several distinct advantages:lower component costs,lower dv/dt,lower power losses,and reduced concerns about device reliability.A 1.6 kW,5-level PFC converter prototype is designed and fabricated with an efficiency of 99.18%and a power factor of 0.99,which are experimentally demonstrated.The operation principle,design considerations,control strategy and experimental results are discussed.
文摘The Power Factor Correction(PFC)in Switched Reluctance(SR)motor is discussed in this article.The SR motors are applicable for multiple applications like electric vehicles,wind mills,machineries etc.The doubly salient structure of SR motor causes the occurrence of torque ripples,which affects the power factor of the motor.To improve the power quality,the power factor has to be corrected and the ripples have to be minimized.In order to achieve these objectives,a novel power factor correction(PFC)method is proposed in this work.Here,the conventional Diode Bridge Rectifier(DBR)is replaced by a Bridgeless Hybrid Resonant(HR)converter,which assists in improvising the output in a wider range.The converter is chosen because of having variety of beneficial measures including high gain.The converter’s output is fed to the SR motor by means of an asymmetric Bridge Resonant(BR)converter.The proposed converter operates in continuous mode of conduction with the switching frequency of 10 KHz.A hysteresis current controller and Proportional Integral(PI)controller are utilized for reducing the harmonics in the source current along with the regulation of output voltage.In addition,the speed control of SR motor is accomplished by means of the Whale Optimization Algorithm(WOA)assisted PI controller.The proposed methodology is effective for the control of unity power factor,torque and current ripples.The Total Harmonic Distortion(THD)of the source current is also minimized,which suits the standard of International Electrotechnical Comission IEC 61000-3-2.By this methodology,the power factor of 0.99 is achieved with 97%efficiency and 3.92%THD.The proposed methodology is validated in simulation by MATLAB and in hardware by FPGA Spartan 6E.
基金supported by the Science and Technology Project of State Grid Corporation of China(W22KJ2722005)Tianyou Innovation Team of Lanzhou Jiaotong University(TY202009).
文摘Aiming at the problems of output voltage fluctuation and current total harmonic distortion(THD)in the front stage totem-pole bridgeless PFC of two-stage V2G(Vehicle to Grid)vehicle-mounted bi-directional converter,a fuzzy linear active disturbance rejection control strategy for V2G front-stage AC-DC power conversion system is proposed.Firstly,the topologicalworkingmode of the totem-pole bridgeless PFC is analyzed,and themathematical model is established.Combined with the system model and the linear active disturbance rejection theory,a double closed-loop controller is designed with the second-order linear active disturbance rejection control as the voltage outer loop and PI control as the current inner loop.The controller can realize self-adaptive tuning of the proportional gain coefficient of the active disturbance rejection controller through fuzzy reasoning and realize self-adaptive control.Simulation and experimental results show that this method can better solve the problems of slow system response and high total harmonic distortion rate of input current and effectively improve the system’s robustness.