期刊文献+
共找到8,304篇文章
< 1 2 250 >
每页显示 20 50 100
In-situ defect passivation assisted three-step printing of efficient and stable formamidine-lead bromide solar cells
1
作者 Hang Yang Tao Zhou +6 位作者 Haoyu Cai Wenjian Shen Hao Chen Yongjun Liu Juan Zhao Yi-Bing Cheng Jie Zhong 《Journal of Energy Chemistry》 SCIE EI CAS CSCD 2024年第9期396-405,共10页
Perovskite solar cells(PSCs)emerge as the most promising photovoltaics(PV)for their high performance and potential convenient cost-effective production routes comparing to the sophomore PV technologies.The printed PSC... Perovskite solar cells(PSCs)emerge as the most promising photovoltaics(PV)for their high performance and potential convenient cost-effective production routes comparing to the sophomore PV technologies.The printed PSCs with simplified device architecture and fabrication procedures could further enhance the competitive strength of PSC technology.In this work,we present an in-situ defect passivation(ISDP)assisted full-printing of high performance formamidine-lead bromide(FAPbBr_(3))PSCs.Only three rapid printing steps are involved for electron transporting layer(ETL),perovskite and carbon to form a complete solar cell on the low-cost fluorine-doped tin oxide(FTO)substrate.Long-chain polymer monomethyl ether polyethylene glycol is particularly utilized as the ISDP passivator,leading to conformal coating on the rough FTO and defect passivation for both ETL and perovskite during printing.A high efficiency of 10.85%(certified 10.14%)and a high V_(oc)up to 1.57 V are achieved for the printed device.The unencapsulated PSCs maintain above 90%of the initial efficiency after continuously heating at 85℃for 1000 h and over 80%of the efficiency after the maximum power point tracking for 3500 h.The fully printed semitransparent PSCs with carbon grids(CGs)show average visible light transmittance over 33%and an efficiency of 8.81%. 展开更多
关键词 Formamidinium lead bromide Fully printed Lowcosts Carbon electrode SEMITRANSPARENT
下载PDF
Clinical Efficacy Analysis of Tiotropium Bromide Combined with Budesonide and Formoterol Inhalation in Treating COPD
2
作者 Hailing Lin Yanjie Lu 《Journal of Clinical and Nursing Research》 2024年第1期1-6,共6页
Objective:To analyze the clinical efficacy of tiotropium bromide(TB)combined with budesonide formoterol(BUD/FM)inhalation in treating chronic obstructive pulmonary disease(COPD).Methods:62 COPD patients admitted to th... Objective:To analyze the clinical efficacy of tiotropium bromide(TB)combined with budesonide formoterol(BUD/FM)inhalation in treating chronic obstructive pulmonary disease(COPD).Methods:62 COPD patients admitted to the hospital between June 2020 and December 2022 were selected as samples for this study.The patients were divided into a combination group and a conventional group using the random number table method,with 31 cases in each group.The patients in the combination group were treated with TB combined with BUD/FM inhalation,whereas the patients in the conventional group were treated with BUD/FM inhalation only.The treatment efficacy and changes in lung function indicators of both groups were compared.Results:The total efficacy of treatment in the combined group was higher than that in the conventional group,and the difference was statistically significant(P<0.05).Before treatment,there was no difference in pulmonary function indicators between the two groups(P>0.05).After three months of treatment,all lung function indicators of the combined group were higher than those of the conventional group,and the difference was statistically significant(P<0.05).Conclusion:Combining TB with BUD/FM inhalation therapy increases the efficacy of treatment for patients with COPD.Besides,it also improves lung function and leads to a better prognosis. 展开更多
关键词 Tiotropium bromide Budesonide formoterol Inhalation therapy Chronic obstructive pulmonary disease
下载PDF
CTAB改性Cu-BTC材料的合成及其吸附分离二甲苯异构体的性能 被引量:1
3
作者 陈乐 种海玲 +2 位作者 张致慧 何明阳 陈群 《化工进展》 EI CAS CSCD 北大核心 2024年第1期455-464,共10页
通过水热法合成Cu-BTC晶体的过程中添加十六烷基三甲基溴化铵(CTAB),通过调节CTAB的添加量对吸附材料的形貌和孔结构进行改性,改性后的Cu-BTC材料与原Cu-BTC相比,其对对二甲苯(PX)的静态吸附量明显提高,且高于间二甲苯(MX)和邻二甲苯(O... 通过水热法合成Cu-BTC晶体的过程中添加十六烷基三甲基溴化铵(CTAB),通过调节CTAB的添加量对吸附材料的形貌和孔结构进行改性,改性后的Cu-BTC材料与原Cu-BTC相比,其对对二甲苯(PX)的静态吸附量明显提高,且高于间二甲苯(MX)和邻二甲苯(OX),从而提高了异构体的吸附选择性。研究了二甲苯异构体在Cu-BTC-CTAB材料上的静态吸附性能和吸附动力学性能。在298K、318K和338K温度下进行了一系列二甲苯有机蒸气吸附平衡实验,得到了静态吸附速率曲线和吸附等温线。改性材料中CTAB添加量为0.08%的Cu-BTC-CTAB样品对PX的吸附量和选择性最优。动力学研究表明,二甲苯异构体在Cu-BTC-CTAB上的吸附过程可以用一级动力学模型来描述。 展开更多
关键词 Cu-BTC ctab改性 吸附分离 二甲苯异构体
下载PDF
CTAB/SDBS水基囊泡相磁流体制备及稳定性研究
4
作者 左春玲 邓庆芳 宋伟明 《化学研究与应用》 CAS 北大核心 2024年第6期1400-1405,共6页
以阳离子表面活性剂十六烷基三甲基溴化胺(CTAB)和阴离子表面活性剂十二烷基苯磺酸钠(SDBS)为原料复配自发形成囊泡相,并以其为微反应器,Fe^(2+)和Fe^(3+)在囊泡内发生反应,得到平均粒径为20m的Fe_(3)O_(4)纳米晶囊泡分散液作为水基磁... 以阳离子表面活性剂十六烷基三甲基溴化胺(CTAB)和阴离子表面活性剂十二烷基苯磺酸钠(SDBS)为原料复配自发形成囊泡相,并以其为微反应器,Fe^(2+)和Fe^(3+)在囊泡内发生反应,得到平均粒径为20m的Fe_(3)O_(4)纳米晶囊泡分散液作为水基磁流体。采用广角X射线衍射(XRD)、X射线光电子能谱(XPS)、透射电镜(TEM)、扫描电镜(SEM)、磁滞回线(VSM)等对合成的Fe_(3)O_(4)纳米晶以及磁流体进行分析表征。结果表明,以合适的阴阳离子表面活性剂获得的囊泡相为微反应器形成的水基囊泡相磁流体,在室温稳定性优良,静置60h其稳定性系数仍然可达97%。在磁场反复作用后,囊泡相水基磁流体仍具有良好的稳定性,其中的Fe_(3)O_(4)纳米粒子颗粒均匀,具有超顺磁性特征,磁饱和度达到59emu/g。 展开更多
关键词 ctab/SDBS 囊泡 微反应器 磁流体 FeO4磁纳米粒子 稳定性
下载PDF
改良CTAB法提取不同作物总RNA技术研究 被引量:1
5
作者 刘国梅 郭淑慧 +3 位作者 孙璇 姚琳 张高扬 杜春芳 《中国农学通报》 2024年第11期28-35,共8页
为提高操作效率,本研究开发出一种简洁有效的作物总RNA提取方法。研究以油菜、棉花、花生、小麦、马铃薯、玉米、大豆、西葫芦等作物的不同组织为试材,通过CTAB法、改良CTAB法及TanSzol Reagent试剂盒法提取总RNA,检测结果发现,经过改... 为提高操作效率,本研究开发出一种简洁有效的作物总RNA提取方法。研究以油菜、棉花、花生、小麦、马铃薯、玉米、大豆、西葫芦等作物的不同组织为试材,通过CTAB法、改良CTAB法及TanSzol Reagent试剂盒法提取总RNA,检测结果发现,经过改良后的CTAB法提取的总RNA质量较高。在油菜花瓣、小麦、花生、西葫芦叶片中,该方法获得了较高的总RNA得率,分别为24.5、23.7、26.4、17.35μg/mL;OD260/280和OD260/230值分别为1.90、1.73、1.72、1.80和2.10、1.50、2.01、1.70。综合比较以上3种方法,改良后的CTAB法适用于油菜、小麦、花生、西葫芦等作物的总RNA提取,为后续分子生物学检测奠定了基础。 展开更多
关键词 改良ctab 总RNA RNA提取
原文传递
DES+CTAB复配驱油剂体系提高低渗致密砂岩油藏采收率机理 被引量:1
6
作者 白佳佳 司双虎 +5 位作者 陶磊 王国庆 王龙龙 史文洋 张娜 朱庆杰 《岩性油气藏》 CAS CSCD 北大核心 2024年第1期169-177,共9页
针对低渗致密油藏注水困难、采收率低等问题,利用尿素基深共晶溶剂(DES)与十六烷基三甲基溴化铵(CTAB)复配的驱油剂体系,对驱油剂在低渗致密油藏中的降压增注和提高采收率机理进行了研究。研究结果表明:①驱油剂体系可以将油水界面张力... 针对低渗致密油藏注水困难、采收率低等问题,利用尿素基深共晶溶剂(DES)与十六烷基三甲基溴化铵(CTAB)复配的驱油剂体系,对驱油剂在低渗致密油藏中的降压增注和提高采收率机理进行了研究。研究结果表明:①驱油剂体系可以将油水界面张力降低至10^(-3)mN/m以下,大大提高了洗油效率;②驱油剂体系可有效抑制黏土矿物水化,避免了低渗致密砂岩中黏土矿物水化膨胀带来的流体敏感性损害;③驱油剂体系可对砂岩表面进行界面修饰,驱油剂溶液浸泡后样品的油相接触角由25.8°增加至61.4°,亲水性增强,亲油性减弱,有助于吸附在岩石孔隙壁面的油膜脱落;④超前注入驱油剂的注入压力降低率平均为79.64%,采收率平均为50.96%,远大于常规水驱(一次注水→注驱油剂驱→二次注水)的采收率。 展开更多
关键词 低渗致密砂岩油藏 尿素基深共晶溶剂(DES) 十六烷基三甲基溴化铵(ctab) 水驱 黏土矿物水化膨胀 表面活性剂 提高采收率
下载PDF
十六烷基三甲基溴化铵(CTAB)辅助水热法制备介孔Nb_(2)O_(5)及其光催化性能 被引量:1
7
作者 褚一威 靳凤先 +1 位作者 马同宇 郭盛祺 《环境化学》 CAS CSCD 北大核心 2024年第10期3527-3537,共11页
构建了一种简单的十六烷基三甲基溴化铵(CTAB)辅助水热法来制备介孔Nb_(2)O_(5)催化剂样品,并通过扫描电子显微镜(SEM)、X射线衍射分析(XRD)、X射线光电子能谱(XPS)、紫外-可见漫反射光谱(UV-vis DRS)等测试手段,对催化剂形貌结构和光... 构建了一种简单的十六烷基三甲基溴化铵(CTAB)辅助水热法来制备介孔Nb_(2)O_(5)催化剂样品,并通过扫描电子显微镜(SEM)、X射线衍射分析(XRD)、X射线光电子能谱(XPS)、紫外-可见漫反射光谱(UV-vis DRS)等测试手段,对催化剂形貌结构和光电特性进行了分析.研究发现,CTAB的加入是导致Nb_(2)O_(5)产生介孔的主要原因.介孔的存在,不仅改善了催化剂吸附能力,同时诱导更多表面氧空位的形成,这些变化增强了催化剂表面活性氧物种的产生能力.此外,更多的氧空位的存在充当光生电子(e−)的复合中心,使CTAB辅助水热制备的Nb_(2)O_(5)催化剂具有更加优异的光生电荷分离能力.将得到的催化剂用于水中污染物控制,包括罗丹明B(RhB)的降解以及重金属Cr(Ⅵ)的还原,其中最优掺杂比例C10-NbO样品在20 min后对罗丹明B的去除率达到99%,在最佳反应条件下60 min内对Cr(Ⅵ)的去除率可以达到98%.系列实验结果均证实介孔Nb_(2)O_(5)催化剂材料优异的光催化氧化还原能力.此外,探究了催化剂的稳定性以及在宽泛水环境条件下的应用效果,表明其具有一定的应用潜质. 展开更多
关键词 Nb_(2)O_(5) 光催化 十六烷基三甲基溴化铵 (ctab) 介孔
原文传递
CTAB对SA210C钢在酸性环境中腐蚀电化学行为的影响
8
作者 毛晓飞 刘宣义 +5 位作者 刘帅岐 徐媛媛 黄世福 董雪峰 何华林 刘光明 《电镀与精饰》 CAS 北大核心 2024年第11期9-16,共8页
针对不同浓度十六烷基三甲基溴化铵(CTAB)对SA210C钢在两种酸性模拟溶液中的缓蚀效果,采用动电位扫描曲线与电化学阻抗谱(EIS)方法分析了不同条件下SA210C钢电化学腐蚀特征,计算了不同浓度缓蚀剂的缓蚀效率(IE,%),研究了pH值和缓蚀剂对... 针对不同浓度十六烷基三甲基溴化铵(CTAB)对SA210C钢在两种酸性模拟溶液中的缓蚀效果,采用动电位扫描曲线与电化学阻抗谱(EIS)方法分析了不同条件下SA210C钢电化学腐蚀特征,计算了不同浓度缓蚀剂的缓蚀效率(IE,%),研究了pH值和缓蚀剂对腐蚀速率的影响。结果表明:未添加缓蚀剂时,SA210C钢在pH=6.5模拟溶液中自腐蚀电位较在pH=5.5溶液中更正,但腐蚀电流密度有所下降;添加缓蚀剂后,SA210C钢在相同pH值下自腐蚀电位和腐蚀电流密度均呈现先减小后增大趋势,缓蚀剂添加量为60 mg/L时缓蚀效率达到最高值75.60%。pH值降低时,SA210C钢容抗弧半径减小,减小趋势与规律同极化曲线所得规律一致。因此,未添加缓蚀剂时,SA210C钢在酸性环境中表现为活性溶解状态;与pH=5.5溶液相比,SA210C钢在pH=6.5溶液中腐蚀倾向高但腐蚀速率较缓慢。随着CTAB添加量的增加,其对SA210C钢在酸性环境中的缓蚀效果呈现先增大后减小趋势,缓蚀剂浓度为60 mg/L时有最佳缓蚀效果,继续添加至80 mg/L后,缓蚀效果显著下降。 展开更多
关键词 SA210C钢 ctab 缓蚀剂 酸性环境 电化学测试 腐蚀
下载PDF
Azoximer bromide and hydroxyapatite:promising immune adjuvants in cancer
9
作者 Jean-François Rossi Patrick Frayssinet +1 位作者 Maksim Matciyak Nikolai Tupitsyn 《Cancer Biology & Medicine》 SCIE CAS CSCD 2023年第12期1021-1034,共14页
Immune adjuvants are immune modulators that have been developed in the context of infectious vaccinations.There is currently a growing interest in immune adjuvants due to the development of immunotherapy against cance... Immune adjuvants are immune modulators that have been developed in the context of infectious vaccinations.There is currently a growing interest in immune adjuvants due to the development of immunotherapy against cancers.Immune adjuvant mechanisms of action are focused on the initiation and amplification of the inflammatory response leading to the innate immune response,followed by the adaptive immune response.The main activity lies in the support of antigen presentation and the maturation and functions of dendritic cells.Most immune adjuvants are associated with a vaccine or incorporated into the new generation of m RNA vaccines.Few immune adjuvants are used as drugs.Hydroxyapatite(HA)ceramics and azoximer bromide(AZB)are overlooked molecules that were used in early clinical trials,which demonstrated clinical efficacy and excellent tolerance profiles.HA combined in an autologous vaccine was previously developed in the veterinary field for use in canine spontaneous lymphomas.AZB,an original immune modulator derived from a class of heterochain aliphatic polyamines that is licensed in Russia,the Commonwealth of Independent States,and Slovakia for infectious and inflammatory diseases,is and now being developed for use in cancer with promising results.These two immune adjuvants can be combined in various immunotherapy strategies. 展开更多
关键词 Immune adjuvants CANCER azoximer bromide HYDROXYAPATITE Toll receptor agonists IMMUNOTHERAPY
下载PDF
基于MSEP@CTAB的磁固相萃取结合HPLC-UV法测定环境水和饮品中的苏丹红
10
作者 吴枫 龙瑞宽 +3 位作者 周媛媛 王鑫 刘有平 邸欣 《沈阳药科大学学报》 CAS CSCD 2024年第9期1190-1197,1204,共9页
目的制备一种有机/无机双功能化磁性纳米复合材料MSEP@CTAB,将其作为磁固相萃取的吸附剂并结合HPLC-UV法检测环境水和饮品中的苏丹红残留。方法以Fe_(3)O_(4)作为磁性纳米粒子,选择海泡石(Sepiolite,SEP)为无机材料对其进行修饰,再采用... 目的制备一种有机/无机双功能化磁性纳米复合材料MSEP@CTAB,将其作为磁固相萃取的吸附剂并结合HPLC-UV法检测环境水和饮品中的苏丹红残留。方法以Fe_(3)O_(4)作为磁性纳米粒子,选择海泡石(Sepiolite,SEP)为无机材料对其进行修饰,再采用十六烷基三甲基溴化铵(cetyltrimethylammonium bromide,CTAB)进行有机改性,得到有机/无机双功能化磁性纳米复合材料MSEP@CTAB;利用傅里叶变换红外光谱仪、透射电子显微镜、X射线衍射仪、振动样品磁力针和全自动比表面及孔隙度分析仪等对复合材料进行表征;考察并优化磁固相萃取条件。结果在最佳实验条件下,3种苏丹红染料在质量浓度0.5~50 ng·mL^(-1)内线性关系良好(R^(2)≥0.9962),检测限为0.05~0.07 ng·mL^(-1),定量限为0.17~0.23 ng·mL^(-1),日内和日间精密度分别为1.8%~8.8%和2.8%~9.0%。该方法被成功应用于环境水和饮品中3种苏丹红染料的检测,加标回收率为82.5%~108.2%。结论所建立的方法简便、快速、灵敏,为环境水和饮品中痕量苏丹红染料的检测提供了一种可行的策略。 展开更多
关键词 海泡石 十六烷基三甲基溴化铵 磁固相萃取 苏丹红 高效液相色谱法
原文传递
CTAB水溶液浓度对脉动热管传热性能的影响
11
作者 陈子豪 杨洪海 +2 位作者 尹勇 沈俊杰 何伟琪 《节能》 2024年第3期62-65,共4页
为了研究十六烷基三甲基溴化铵(CTAB)对脉动热管(PHP)传热性能的影响,搭建一个铜制PHP实验装置平台,探究不同质量分数(0~0.072%)的CTAB水溶液对PHP的传热性能的影响,实验充液率为50%。结果显示:向水中添加CTAB可以改善PHP内部液塞的脉... 为了研究十六烷基三甲基溴化铵(CTAB)对脉动热管(PHP)传热性能的影响,搭建一个铜制PHP实验装置平台,探究不同质量分数(0~0.072%)的CTAB水溶液对PHP的传热性能的影响,实验充液率为50%。结果显示:向水中添加CTAB可以改善PHP内部液塞的脉动频率及传热性能。PHP的传热热阻与加热功率和CTAB的浓度有关,随着加热功率和CTAB浓度的增加而减小。加热功率为20 W时,与纯水PHP相比,质量分数为0.072%的CTAB水溶液具有最大的强化作用率(31.6%);加热功率达到90 W后,向水中添加CTAB对PHP传热的强化作用相对较弱。研究表明,CTAB可以改善PHP的传热性能,并增加其传热效率。 展开更多
关键词 表面活性剂 脉动热管 ctab 传热性能
下载PDF
Tiotropium Bromide/Olodaterol Related Acute Cognitive Impairments
12
作者 Samer Alkhuja Monika Girgis 《Case Reports in Clinical Medicine》 2023年第5期119-125,共7页
Background: The use of anticholinergics has been on the rise. With the increase in population longevity, more medication-related cognitive impairments (ACIs) have been reported. These impairments result in significant... Background: The use of anticholinergics has been on the rise. With the increase in population longevity, more medication-related cognitive impairments (ACIs) have been reported. These impairments result in significant morbidities. We present a case that stresses on the importance of being vigilant when prescribing anticholinergic medications, especially in the elderlies. Case Report: A case of ACIs related to the use of tiotropium bromide/olodaterol (Stiolto Respimat) is being reported in a 71-year-old white man with COPD. Treatment with budesonide 180 mcg/actuation, and tiotropium bromide/olodaterol (Stiolto Respimat) inhalers was initiated. Two days after initiating treatment, the patient developed ACIs which manifested by gait imbalance, short-term memory dysfunction, inability to remember his family members, or to take his medications. Tiotropium bromide/olodaterol (Stiolto Respimat) was discontinued. After three days, a full recovery of ACIs was reported. A month later, due to worsening dyspnea, the patient self-resumed the medicine. Similar ACIs were reported within two days of resuming treatment. Tiotropium bromide/olodaterol (Stiolto Respimat) was discontinued indefinitely. Full recovery of ACIs was reported. Conclusion: ACIs should be noted as a significant side effect of tiotropium bromide/olodaterol. Clinicians should be vigilant, when prescribing anticholinergic medications to elderlies. 展开更多
关键词 Cognitive Impairment Stiolto Tiotropium bromide/Olodaterol COPD
下载PDF
CTAB/D-sep的制备及其对水体中金橙Ⅱ吸附性能研究
13
作者 任轲 刘阳钰 +1 位作者 高如琴 吴朝阳 《非金属矿》 2024年第6期48-51,55,共5页
为解决染料废水带来的环境污染问题,以天然海泡石为原料,煅烧处理后再采用十六烷基三甲基溴化铵(CTAB)进行改性,制备有机改性海泡石(CTAB/D-sep)。研究了CTAB/D-sep不同吸附条件对水体中金橙Ⅱ吸附性能的影响,并探究了其吸附动力学和热... 为解决染料废水带来的环境污染问题,以天然海泡石为原料,煅烧处理后再采用十六烷基三甲基溴化铵(CTAB)进行改性,制备有机改性海泡石(CTAB/D-sep)。研究了CTAB/D-sep不同吸附条件对水体中金橙Ⅱ吸附性能的影响,并探究了其吸附动力学和热力学。结合透射电镜(TEM)、比表面积(BET)和X射线衍射(XRD)等手段对材料的结构及性能进行了表征。结果表明,CTAB改性后,CTAB/D-sep在不破坏原海泡石(Y-sep)结构的前提下,在纤维状海泡石的表面覆盖了一层300~400 nm厚的表面活性剂薄膜,形成了有机疏水层,减少了纤维的团聚,降低了海泡石表面的电负性,从而增加了吸附性能,CTAB/D-sep比表面积由Y-sep的1.071 m^(2)/g提高到7.042 m^(2)/g。CTAB/D-sep对金橙Ⅱ的吸附效果良好,准二级动力学模型(R^(2)=0.968)和Langmuir热力学模型(R2>0.96)能够很好地拟合CTAB/D-sep对金橙Ⅱ的吸附过程,改性海泡石的吸附属于单分子层化学吸附。 展开更多
关键词 海泡石 ctab 有机改性海泡石 吸附性能 金橙Ⅱ
下载PDF
Feasibility of Tiotropium Bromide Treatment in Patients with Asthma-COPD Overlap Syndrome and its Effect on Lung Function
14
作者 Li Sheng 《Journal of Clinical and Nursing Research》 2023年第4期100-104,共5页
Objective:To explore the feasibility of tiotropium bromide therapy and its effect on the lung function of patients with asthma-COPD overlap syndrome(ACOS).Method:The 58 subjects selected in this study were all ACOS pa... Objective:To explore the feasibility of tiotropium bromide therapy and its effect on the lung function of patients with asthma-COPD overlap syndrome(ACOS).Method:The 58 subjects selected in this study were all ACOS patients admitted to our hospital(Hohhot First Hospital)from October 2020 to October 2022.They were grouped according to the random number table method and divided into a control group(29 cases)and an observation group(29 cases).The control group received routine treatment plus salmeterol-fluticasone powder inhalation treatment,and the observation group received tiotropium bromide treatment.The relevant indicators of the two groups were compared.Results:The total clinical effective rate of the observation group was significantly higher than that of the control group.Besides,the forced vital capacity(FVC),forced expiratory volume in 1 second(FEV1)levels,and ACT scores of the two groups increased after treatment,with the observation group having better results than the control group.The residual volume-total lung capacity ratio(RV/TLC),acute exacerbation frequency,and CAT scores all decreased,with the observation group showing smaller values than the control group.The difference between the results of both groups were significant(P<0.05)Conclusion:Tiotropium bromide has a significant clinical effect in the treatment of ACOS patients and can effectively improve the lung function of patients. 展开更多
关键词 Asthma-COPD overlap syndrome Tiotropium bromide Lung function FEASIBILITY
下载PDF
Effects of Combined Inhalation of Budesonide,Formoterol,and Tiotropium Bromide on Arterial Blood Gas and Pulmonary Function Indexes in Patients with Chronic Obstructive Pulmonary Disease
15
作者 Changli Chen 《Journal of Clinical and Nursing Research》 2023年第5期49-54,共6页
Objective:To analyze the effect of combined inhalation of budesonide formoterol and tiotropium bromide on arterial blood gas and pulmonary function indexes in patients with chronic obstructive pulmonary disease(COPD).... Objective:To analyze the effect of combined inhalation of budesonide formoterol and tiotropium bromide on arterial blood gas and pulmonary function indexes in patients with chronic obstructive pulmonary disease(COPD).Methods:100 patients with COPD treated from January to December 2022 were selected as observation objects,and were divided into a control group(n=50,in which budesonide and formoterol were administered)and an experimental group(n=50,the treatment drug was budesonide formoterol combined with tiotropium bromide)according to the computer grouping method,and compared the treatment results.Results:(i)Before treatment,there was no difference in the partial pressure of carbon dioxide and partial pressure of oxygen between the control group and the experimental group(P>0.05);after treatment,the partial pressure of carbon dioxide and partial pressure of oxygen in the experimental group were higher than those in the control group,with significant differences(P<0.05).(ii)Before treatment,there was no difference in forced vital capacity(FVC),forced expiratory volume in one second(FEV1),FEV1/FVC between the control group and the experimental group(P>0.05);after treatment,the FVC,FEV1,and FEV1/FVC in the experimental group were significantly higher than those in the control group(P<0.05).(iii)There was no difference in the levels of CRP,IL-6,and TNF-αbetween the control group and the experimental group(P>0.05);after treatment,the levels of CRP,IL-6,and TNF-αin the experimental group were lower than those in the control group,with significant differences(P<0.05).(iv)Compared to the total incidence of adverse reactions in the control group(28.00%),the incidence of total adverse reactions in the experimental group was lower at 10.00%,and the difference was significant(P<0.05).Conclusion:The combined inhalation of budesonide and formoterol with tiotropium bromide has demonstrated a clear therapeutic efficacy and safety in treating chronic obstructive pulmonary disease.This treatment approach effectively enhances arterial blood gas levels and lung function,showing promising potential for widespread application. 展开更多
关键词 Budesonide formoterol Tiotropium bromide Chronic obstructive pulmonary disease Arterial blood gas Lung function
下载PDF
Effect of cetyltrimethylammonium bromide on morphology and porous structure of mesoporous hydroxyapatite 被引量:4
16
作者 王晶 黄苏萍 +2 位作者 胡堃 周科朝 孙虹 《Transactions of Nonferrous Metals Society of China》 SCIE EI CAS CSCD 2015年第2期483-489,共7页
The mesoporous hydroxyapatite (HA) was synthesized by hydrothermal method utilizing cationic surfactant cetyltrimethylammonium bromide (CTAB) as template. The crystalline phase, morphology and porous structure wer... The mesoporous hydroxyapatite (HA) was synthesized by hydrothermal method utilizing cationic surfactant cetyltrimethylammonium bromide (CTAB) as template. The crystalline phase, morphology and porous structure were characterized respectively by different detecting techniques. The results reveal that the particles are highly crystalline hydroxyapatite phase. The surfactant has little influence on the morphology of the crystals, but affects the porous structure obviously. The sample without CTAB has a low surface area not exceeding 33 m^2/g, and no distinct pores can be observed by TEM. While the samples obtained with the surfactant get better parameters. Numerous open-ended pores centered at 2-7 nm spread unequally on the surface of the hydroxyapatite nanorods. The N2 adsorption-desorption experiments show type IV isotherms with distinct hysteresis loops, illustrating the presence of mesoporous structure. When the mole ratio of CTAB to HA is 1:2, the sample has the largest surface area of 97.1 m^2/g and pore volume of 0.466 cm^3/g. 展开更多
关键词 HYDROXYAPATITE cetyltrimethylammonium bromide cationic surfactant soft-template mesoporous structure
下载PDF
Binding tendency with oligonucleotides and cell toxicity of cetyltrimethyl ammonium bromide-coated single-walled carbon nanotubes 被引量:2
17
作者 阎雪彬 谷永红 +6 位作者 黄东 甘丽 邬力翔 黄利华 陈哲东 黄苏萍 周科朝 《Transactions of Nonferrous Metals Society of China》 SCIE EI CAS CSCD 2011年第5期1085-1091,共7页
Functionalized carbon nanotubes (CNTs) were made for the delivery of genes and drugs and CNT-based biosensors. The basis of CNTs is for binding with biomolecules in biomedical applications. The binding tendency with... Functionalized carbon nanotubes (CNTs) were made for the delivery of genes and drugs and CNT-based biosensors. The basis of CNTs is for binding with biomolecules in biomedical applications. The binding tendency with small interfering RNA oligonucleotides and cytotoxicity of cetyltrimethyl ammonium bromide (CTAB)-coated single-walled carbon nanotubes (SWNTs) were studied. The field emission scanning electron microscopy and transmission electron microscopy results show that a SWNT suspension in CTAB solution was well-dispersed and stable. CTAB is the cross-linker between SWNTs and oligonucleotides. The CTAB-coated SWNTs have less cytotoxicity to human umbilical vein endothelial cells than single SWNTs and the cytotoxicity of CTAB-coated SWNTs depended on the concentration of CTAB-coated SWNTs. 展开更多
关键词 single-walled carbon nanotubes cetyltrimethyl ammonium bromide OLIGONUCLEOTIDES CYTOTOXICITY
下载PDF
Cu(Ⅱ),Ni(Ⅱ)Complexation with Acid Alizarine Blue B in the Presence of Cetyltrimethylammonium Bromide
18
作者 沈荣 郜洪文 俞汉青 《Chinese Journal of Chemical Physics》 SCIE CAS CSCD 北大核心 2006年第2期178-182,共5页
The coordination reactions of Cu(Ⅱ) and Ni(Ⅱ) with acid alizarine blue B (AABB) in the presence of cetyltrimethylammonium bromide (CTAB) micelle were investigated using the microsurface adsorptionspectral co... The coordination reactions of Cu(Ⅱ) and Ni(Ⅱ) with acid alizarine blue B (AABB) in the presence of cetyltrimethylammonium bromide (CTAB) micelle were investigated using the microsurface adsorptionspectral correction technique (MSASC). The aggregation of AABB on CTAB followed the Langmuir isothermal adsorption law. The enrichment of AABB on CTAB sensitized the complexation between Cu(Ⅱ) or Ni(Ⅱ)and AABB. The binding ratio of AABB to CTAB was 1:2.5, and monomeric aggregate, AABB2CTAB5, was formed with an adsorption constant of 5.95×10^5 at 20 ℃ or 2.48×10^5 at 40 ℃. In the ternary complexation, the ratio of AABB:Cu and AABB:Ni were 1:1 and 1:2.5, respectively. Two types of aggregates, Cu2.AABB2·CTAB80 and Ni5.AABB2.CTAB80, were formed. 展开更多
关键词 Microsurface adsorption-spectral correction technique Langmuir aggregation Acid alizarine blue B Cetyltrimethylammonium bromide Ternary complex
下载PDF
CTAB包埋钒取代Keggin型多金属氧簇复合物催化氧化脱硫性能
19
作者 王垚 郗瑜 +1 位作者 吴家琛 于霞 《吉林化工学院学报》 CAS 2023年第5期91-96,共6页
通过不同钒取代的Keggin型多金属氧酸盐[PMo_(12-x)V_(x)O_(40)]^((3+x)-)(X=1,2,3,8)(简写为PMoV)与十六烷基三甲基溴化铵[(C_(16)H_(33))N(CH_(3))_(3)](CTAB)反应生成四种固体催化剂CTAB-PMo_(12-x)V_(x),比较了四种复合物的催化氧... 通过不同钒取代的Keggin型多金属氧酸盐[PMo_(12-x)V_(x)O_(40)]^((3+x)-)(X=1,2,3,8)(简写为PMoV)与十六烷基三甲基溴化铵[(C_(16)H_(33))N(CH_(3))_(3)](CTAB)反应生成四种固体催化剂CTAB-PMo_(12-x)V_(x),比较了四种复合物的催化氧化脱硫性能。实验结果表明催化剂CTAB-PMo_(11)V_(1)的脱硫效果最佳,在6小时内能将模拟油中500ppm的BT、DBT及其衍生物完全转化。对CTAB-PMo_(11)V_(1)进行了FT-IR、XRD和SEM等表征。另外,对影响催化剂氧化脱硫效率的各种因素、催化剂的稳定性及反应机理也进行了探讨。 展开更多
关键词 氧化脱硫 多金属氧酸盐 ctab 空气
下载PDF
上一页 1 2 250 下一页 到第
使用帮助 返回顶部