Laser-induced breakdown spectroscopy(LIBS) is a potential technology for online coal property analysis,but successful quantitative measurement of calorific value using LIBS suffers from relatively low accuracy caused ...Laser-induced breakdown spectroscopy(LIBS) is a potential technology for online coal property analysis,but successful quantitative measurement of calorific value using LIBS suffers from relatively low accuracy caused by the matrix effect.To solve this problem,the support vector machine(SVM) and the partial least square(PLS) were combined to increase the measurement accuracy of calorific value in this study.The combination model utilized SVM to classify coal samples into two groups according to their volatile matter contents to reduce the matrix effect,and then applied PLS to establish calibration models for each sample group respectively.The proposed model was applied to the measurement of calorific values of 53 coal samples,showing that the proposed model could greatly increase accuracy of the measurement of calorific values.Compared with the traditional PLS method,the coefficient of determination(R2) was improved from 0.93 to 0.97,the root-mean-square error of prediction was reduced from 1.68 MJ kg-1 to1.08 MJ kg-1,and the average relative error was decreased from 6.7% to 3.93%,showing an overall improvement.展开更多
This work investigated and quantified the calorific values of the main branches and trunks of eleven (11) tropical trees in correlation with their chemical composition in order to assess their suitability for use as c...This work investigated and quantified the calorific values of the main branches and trunks of eleven (11) tropical trees in correlation with their chemical composition in order to assess their suitability for use as credible sources of wood fuel. The determination of the carbon, hydrogen, nitrogen, oxygen and sulphur (CHNOS) content of the samples was done using an organic elemental analyser, while an oxygen bomb calorimeter was used to experimentally determine their corresponding gross heat values. The experimental gross heat values for the branches examined ranged from 18,703.37 kJ/kg in Lophira lanceolata to 21,350.35 kJ/kg in Afzelia africana while that of the trunks ranged from 19,747.74 kJ/kg in Tectonia grandis to 22,408.68 kJ/kg in Prosopis africana. These values were within and about the expected ranges observed for tropical trees and may be considered adequate for wood fuel. The general trend in both branches and trunks was that the higher the carbon content, the higher the gross heat value of sample. The absence of sulphur in almost all the samples except, Prosopis africana, (0.055%) was indicative of the fact that the negative environmental impact with respect to harmful emissions of oxides of sulphur is practically non-existent with respect to these species. In the light of the aforementioned variables, the main branches of Afzelia africana (21,350.35 kJ/kg), Nauclea diderrichii (21,157.30 kJ/kg) and Tectonia grandis (20,257.13 kJ/kg) could be used as credible sources of firewood and charcoal production. With respect to the trunks, the timbers in order of preference would ideally be Prosopis africana (22,408.68 kJ/kg), Nauclea diderichii (21,436.42 kJ/kg) and Brachstigia eurychoma (20,924.7 kJ/kg).展开更多
Solid biomass fuels are useful and cost effective renewable energy source. The energy content of biomass is determined by its calorific value. The objective of this study was to determine experimentally the gross calo...Solid biomass fuels are useful and cost effective renewable energy source. The energy content of biomass is determined by its calorific value. The objective of this study was to determine experimentally the gross calorific value (GCV) of different agroforestry species and bio-based industry residues that could be used by: a) companies specialized in processing raw biomass solid biofuel production, b) small-scale consumers (households, medium-sized residential buildings, etc.). The fuel samples used were from agricultural residues and wastes (rice husks, apricot kernels, olive pits, sunflower husks, cotton stems, etc.), energy crops and wetland herbs (cardoon, switchgrass, common reed, narrow-leaf cattail), and forest residues (populus, fagus, pinus). The GCV of the bio-mass samples was experimentally determined based on CEN/TS 14918:2005, and an oxygen bomb calorimeter was used (Model C5000 Adiabatic Calorimeter, IKA?-Werke, Staufen, Germany). The GCV of different agroforestry species and residues ranges from 14.3 - 25.4 MJ?kg<sup>–</sup>1. The highest GCV was obtained by seeds and kernels due to higher unit mass and higher lipid content. Pinus sylvestris with moisture content 24.59% obtained the lowest GCV (13.973 MJ?kg<sup>–</sup>1).展开更多
The determination of operational parameters in the underground coal gasification(UCG)process should be considered in two aspects:first,the total coal in each UCG panel must be gasified and second,the calorific value o...The determination of operational parameters in the underground coal gasification(UCG)process should be considered in two aspects:first,the total coal in each UCG panel must be gasified and second,the calorific value of the produced gas should be acceptable.The main aim of this study is to present a model that meets these aspects and increasing the calorific value of syngas during this process.In order to achieve those aims,eight different increasing scenarios were devised for total gasification of coal per panel.These scenarios included:increasing oxygen injection rate(scenario 1),the amount of steam injection(scenario 2),operation time(scenario 3),cavity pressure(scenario 4),increase operation time and cavity pressure simultaneously(scenario 5),increase steam injection speed and oxygen injection rate simultaneously(scenario 6),increase in cavity pressure,operating time,steam injection rate and oxygen injection rate simultaneously(scenario 7)and also simultaneous increase in the operating time and steam injection rate(scenario 8).The results showed that for producing syngas with a higher calorific value,the following parameters had the most positive effects respectively:operation time,cavity pressure,steam injection rate and oxygen injection rate.Finally,the model validation was performed for the Centralia LBK-1 UCG pilot and the results showed that this model is very close to reality.展开更多
Coal in North Korean(NKC)is one of the most important products;however,based on various strategic policies its detail properties remain opaque even for general researchers.Since there are some signs for opening of the...Coal in North Korean(NKC)is one of the most important products;however,based on various strategic policies its detail properties remain opaque even for general researchers.Since there are some signs for opening of the North Korea economy,this investigation as a modest effort is going to explore principle relationships among some essential parameters of NKCs such as gross calorific value(GCV),valuable elements and conventional properties by different statistical methods.Correlations indicated that ultimate parameters(carbon,nitrogen,and hydrogen)are the best GCV predictors for NKCs in comparison with proximate parameters(ash,moisture and volatile matter).Multivariable regression demonstrated that predicted GCV based on ultimate properties has a quite accuracy when correlation of determination was 0.99.Descriptive statistics processes showed that on average,the contents of valuable elements such as Ga and V for NKCs are higher than the world coal ranges and they can be considered as byproducts of combustion of NKCs.Pearson correlations indicated that Y may have a mixed organic-inorganic affinity while Ga and V mainly occur in the inorganic part(mineral matter)of NKCs.High inter-correlations between Ga-V and Al showed that aluminosilicates can be considered as their main bring minerals.展开更多
Calorific value of plants is an important parameter for evaluating and indexing material cycles and energy conversion in forest ecosystems. Based on mensuration data of 150 sample sets, we analyzed the calorific value...Calorific value of plants is an important parameter for evaluating and indexing material cycles and energy conversion in forest ecosystems. Based on mensuration data of 150 sample sets, we analyzed the calorific value(CV) and ash content(AC) of different parts of Masson pine(Pinus massoniana) trees in southern China using hypothesis testing and regression analysis. CV and AC of different tree parts were almost significantly different(P<0.05). In descending order, ash-free calorific value(AFCV) ranked as foliage > branch > stem bark > root > stem wood, and AC ranked as foliage > stem bark > root > branch > stem wood. CV and AC of stem wood from the top, middle and lower sections of trees differed significantly. CV increased from the top to the lower sections of the trunk while AC decreased. Mean gross calorific value(GCV) and AFCV of aboveground parts were significantly higher than those of belowground parts(roots). The mean GCV, AFCV and AC of a whole tree of Masson pine were 21.54 kJ/g, 21.74 kJ/g and 0.90%, respectively. CV and AC of different tree parts were, to some extent, correlated with tree diameter, height and origin.展开更多
The combustion process of pulverized coal injected into blast furnace involves a lot of physical and chemical reactions. Based on the combustion behaviors of pulverized coal, the conception of coal effective calorific...The combustion process of pulverized coal injected into blast furnace involves a lot of physical and chemical reactions. Based on the combustion behaviors of pulverized coal, the conception of coal effective calorific value representing the actual thermal energy provided for blast furnace was proposed. A cost performance evaluation model of coal injection was built up for the optimal selection of various kinds of coal based on effective calorific value. The model contains two indicators: coal effective calorific value which has eight sub-indicators and coal injection cost which includes four sub-indicators. In addition, the calculation principle and application of cost performance evaluation model in a Chinese large-scale iron and steel company were comprehensively introduced. The evaluation results finally confirm that this novel model is of great significance to the optimal selection of blast furnace pulverized coal.展开更多
This paper explores the defects in fuzzy (hyper) graphs (as complex (hyper) networks) and extends the fuzzy(hyper) graphs to fuzzy (quasi) superhypergraphs as a new concept.We have modeled the fuzzy superhypergraphsas...This paper explores the defects in fuzzy (hyper) graphs (as complex (hyper) networks) and extends the fuzzy(hyper) graphs to fuzzy (quasi) superhypergraphs as a new concept.We have modeled the fuzzy superhypergraphsas complex superhypernetworks in order to make a relation between labeled objects in the form of details andgeneralities. Indeed, the structure of fuzzy (quasi) superhypergraphs collects groups of labeled objects and analyzesthem in the form of the part to part of objects, the part of objects to the whole group of objects, and the whole tothe whole group of objects at the same time.We have investigated the properties of fuzzy (quasi) superhypergraphsbased on any positive real number as valued fuzzy (quasi) superhypergraphs, considering the complement of valuedfuzzy (quasi) superhypergraphs, the notation of isomorphism of valued fuzzy (quasi) superhypergraphs based onthe permutations, and we have presented the isomorphic conditions of (self complemented) valued fuzzy (quasi)superhypergraphs. The concept of impact membership value of fuzzy (quasi) superhypergraphs is introducedin this study and it is applied in designing the real problem in the real world. Finally, the problem of businesssuperhypernetworks is presented as an application of fuzzy valued quasi superhypergraphs in the real world.展开更多
Yellow mealworm larvae(YML;Tenebrio molitor) are considered as a valuable insect species for animal feed due to their high nutritional values and ability to grow under different substrates and rearing conditions. Adva...Yellow mealworm larvae(YML;Tenebrio molitor) are considered as a valuable insect species for animal feed due to their high nutritional values and ability to grow under different substrates and rearing conditions. Advances in the understanding of entomophagy and animal nutrition over the past decades have propelled research areas toward testing multiple aspects of YML to exploit them better as animal feed sources. This review aims to summarize various approaches that could be exploited to maximize the nutritional values of YML as an animal feed ingredient. In addition, YML has the potential to be used as an antimicrobial or bioactive agent to improve animal health and immune function in production animals. The dynamics of the nutritional profile of YML can be influenced by multiple factors and should be taken into account when attempting to optimize the nutrient contents of YML as an animal feed ingredient. Specifically, the use of novel land-based and aquatic feeding resources, probiotics, and the exploitation of larval gut microbiomes as novel strategies can assist to maximize the nutritional potential of YML. Selection of relevant feed supplies, optimization of ambient conditions, the introduction of novel genetic selection procedures, and implementation of effective post-harvest processing may be required in the future to commercialize mealworm production. Furthermore, the use of appropriate agricultural practices and technological improvements within the mealworm production sector should be aimed at achieving both economic and environmental sustainability. The issues highlighted in this review could pave the way for future approaches to improve the nutritional value of YML.展开更多
The study of extreme weather and space events has gained paramount importance in modern society owing to rapid advances in high technology.Understanding and describing exceptional occurrences plays a crucial role in m...The study of extreme weather and space events has gained paramount importance in modern society owing to rapid advances in high technology.Understanding and describing exceptional occurrences plays a crucial role in making decisive assessments of their potential impact on technical,economic,and social aspects in various fields.This research focuses on analyzing the hourly values of the auroral electrojet(AE)geomagnetic index from 1957 to 2019 by using the peak over threshold method in extreme value theory.By fitting the generalized Pareto distribution to extreme AE values,shape parameter indices were derived,revealing negative values that establish an upper bound for this time series.Consequently,it became evident that the AE values had reached a plateau,suggesting that extreme events exceeding the established upper limit are rare.As a result,although the need for diligent precautions to mitigate the consequences of such extreme events persists,surpassing the upper limit of AE values becomes increasingly challenging.It is also possible to observe an aurora in the middle-and low-latitude regions during the maximum period of the AE index.展开更多
This paper presents a novel cooperative value iteration(VI)-based adaptive dynamic programming method for multi-player differential game models with a convergence proof.The players are divided into two groups in the l...This paper presents a novel cooperative value iteration(VI)-based adaptive dynamic programming method for multi-player differential game models with a convergence proof.The players are divided into two groups in the learning process and adapt their policies sequentially.Our method removes the dependence of admissible initial policies,which is one of the main drawbacks of the PI-based frameworks.Furthermore,this algorithm enables the players to adapt their control policies without full knowledge of others’ system parameters or control laws.The efficacy of our method is illustrated by three examples.展开更多
The boundary value problem plays a crucial role in the analytical investigation of continuum dynamics. In this paper, an analytical method based on the Dirac operator to solve the nonlinear and non-homogeneous boundar...The boundary value problem plays a crucial role in the analytical investigation of continuum dynamics. In this paper, an analytical method based on the Dirac operator to solve the nonlinear and non-homogeneous boundary value problem of rectangular plates is proposed. The key concept behind this method is to transform the nonlinear or non-homogeneous part on the boundary into a lateral force within the governing function by the Dirac operator, which linearizes and homogenizes the original boundary, allowing one to employ the modal superposition method for obtaining solutions to reconstructive governing equations. Once projected into the modal space, the harmonic balance method(HBM) is utilized to solve coupled ordinary differential equations(ODEs)of truncated systems with nonlinearity. To validate the convergence and accuracy of the proposed Dirac method, the results of typical examples, involving nonlinearly restricted boundaries, moment excitation, and displacement excitation, are compared with those of the differential quadrature element method(DQEM). The results demonstrate that when dealing with nonlinear boundaries, the Dirac method exhibits more excellent accuracy and convergence compared with the DQEM. However, when facing displacement excitation, there exist some discrepancies between the proposed approach and simulations;nevertheless, the proposed method still accurately predicts resonant frequencies while being uniquely capable of handling nonuniform displacement excitations. Overall, this methodology offers a convenient way for addressing nonlinear and non-homogenous plate boundaries.展开更多
Clifford analysis is an important branch of modern analysis;it has a very important theoretical significance and application value,and its conclusions can be applied to the Maxwell equation,Yang-Mill field theory,quan...Clifford analysis is an important branch of modern analysis;it has a very important theoretical significance and application value,and its conclusions can be applied to the Maxwell equation,Yang-Mill field theory,quantum mechanics and value problems.In this paper,we first give the definition of a quasi-Cauchy type integral in complex Clifford analysis,and get the Plemelj formula for it.Second,we discuss the H?lder continuity for the Cauchy-type integral operators with values in a complex Clifford algebra.Finally,we prove the existence of solutions for a class of linear boundary value problems and give the integral representation for the solution.展开更多
Thermal analysis plays a key role in the online inspection of molten iron quality.Different solidification process of molten iron can be reflected by thermal analysis curves,and silicon is one of important elements af...Thermal analysis plays a key role in the online inspection of molten iron quality.Different solidification process of molten iron can be reflected by thermal analysis curves,and silicon is one of important elements affecting the solidification of molten iron.In this study,FeSi75 was added in one chamber of the dual-chamber sample cup,and the influences of FeSi75 additive on the characteristic values of thermal analysis curves and vermiculating rate were investigated.The results show that with the increase of FeSi75,the start temperature of austenite formation TALfirstly decreases and then increases,but the start temperature of eutectic growth TSEF,the lowest eutectic temperature TEU,temperature at maximum eutectic reaction rate TEM,and highest eutectic temperature TERkeep always an increase.The temperature at final solidification point TEShas little change.The FeSi75 additive has different influences on the vermiculating rate of molten iron with different vermiculation,and the vermiculating rate increases for lower vermiculation molten iron while decreases for higher one.According to the thermal analysis curves obtained by a dual-chamber sample cup with 0.30wt.%FeSi75 additive in one chamber,the vermiculating rate of molten iron can be evaluated by comparing the characteristic values of these curves.The time differenceΔtERcorresponding to the highest eutectic temperature TERhas a closer relationship with the vermiculating rate,and a parabolic regression curve between the time differenceΔtERand vermiculating rateηhas been obtained within the range of 65%to 95%,which is suitable for the qualified melt.展开更多
The frequent missing values in radar-derived time-series tracks of aerial targets(RTT-AT)lead to significant challenges in subsequent data-driven tasks.However,the majority of imputation research focuses on random mis...The frequent missing values in radar-derived time-series tracks of aerial targets(RTT-AT)lead to significant challenges in subsequent data-driven tasks.However,the majority of imputation research focuses on random missing(RM)that differs significantly from common missing patterns of RTT-AT.The method for solving the RM may experience performance degradation or failure when applied to RTT-AT imputation.Conventional autoregressive deep learning methods are prone to error accumulation and long-term dependency loss.In this paper,a non-autoregressive imputation model that addresses the issue of missing value imputation for two common missing patterns in RTT-AT is proposed.Our model consists of two probabilistic sparse diagonal masking self-attention(PSDMSA)units and a weight fusion unit.It learns missing values by combining the representations outputted by the two units,aiming to minimize the difference between the missing values and their actual values.The PSDMSA units effectively capture temporal dependencies and attribute correlations between time steps,improving imputation quality.The weight fusion unit automatically updates the weights of the output representations from the two units to obtain a more accurate final representation.The experimental results indicate that,despite varying missing rates in the two missing patterns,our model consistently outperforms other methods in imputation performance and exhibits a low frequency of deviations in estimates for specific missing entries.Compared to the state-of-the-art autoregressive deep learning imputation model Bidirectional Recurrent Imputation for Time Series(BRITS),our proposed model reduces mean absolute error(MAE)by 31%~50%.Additionally,the model attains a training speed that is 4 to 8 times faster when compared to both BRITS and a standard Transformer model when trained on the same dataset.Finally,the findings from the ablation experiments demonstrate that the PSDMSA,the weight fusion unit,cascade network design,and imputation loss enhance imputation performance and confirm the efficacy of our design.展开更多
Establishing a sense of ritual within tourism consumption scenarios offers tourists the opportunity for interactive engagement.Drawing upon the value co-creation theory,this study constructed an influence mechanism mo...Establishing a sense of ritual within tourism consumption scenarios offers tourists the opportunity for interactive engagement.Drawing upon the value co-creation theory,this study constructed an influence mechanism model to examine tourists'active engagement in the process of co-creating tourism experience values.It employed Partial Least Squares Structural Equation Modeling(PLS-SEM)to empirically test the proposed hypotheses.The findings demonstrate that the model constructed in the present study exhibits robust reliability,validity,and explanatory power.The perception of the sense of ritual in tourism exerts a significant positive influence on tourists’co-creation of tourism experience values,thereby significantly enhancing both the communitas and flow experienced by tourists during their travels.Moreover,such communitas and flow can mediate the influence of the sense of ritual in tourism on tourists’co-creation of tourism experience values.This study contributes to advancing the current research on tourists’co-creation of tourism experience values and the sense of ritual in tourism,thereby providing theoretical foundations for cultivating a sense of ritual within tourism consumption scenarios.展开更多
In this study,a wavelet multi-resolution interpolation Galerkin method(WMIGM)is proposed to solve linear singularly perturbed boundary value problems.Unlike conventional wavelet schemes,the proposed algorithm can be r...In this study,a wavelet multi-resolution interpolation Galerkin method(WMIGM)is proposed to solve linear singularly perturbed boundary value problems.Unlike conventional wavelet schemes,the proposed algorithm can be readily extended to special node generation techniques,such as the Shishkin node.Such a wavelet method allows a high degree of local refinement of the nodal distribution to efficiently capture localized steep gradients.All the shape functions possess the Kronecker delta property,making the imposition of boundary conditions as easy as that in the finite element method.Four numerical examples are studied to demonstrate the validity and accuracy of the proposedwavelet method.The results showthat the use ofmodified Shishkin nodes can significantly reduce numerical oscillation near the boundary layer.Compared with many other methods,the proposed method possesses satisfactory accuracy and efficiency.The theoretical and numerical results demonstrate that the order of theε-uniform convergence of this wavelet method can reach 5.展开更多
This paper considers the regularity of solutions to mixed boundary value problems in small-angle regions for elliptic equations. By constructing a specific barrier function, we proved that under the assumption of suff...This paper considers the regularity of solutions to mixed boundary value problems in small-angle regions for elliptic equations. By constructing a specific barrier function, we proved that under the assumption of sufficient regularity of boundary conditions and coefficients, as long as the angle is sufficiently small, the regularity of the solution to the mixed boundary value problem of the second-order elliptic equation can reach any order.展开更多
基金supported by the key R&D program of China Energy Investment Corporation (GJNY-18-27)National Natural Science Foundation of China (Nos. 61675110 and 51906124)。
文摘Laser-induced breakdown spectroscopy(LIBS) is a potential technology for online coal property analysis,but successful quantitative measurement of calorific value using LIBS suffers from relatively low accuracy caused by the matrix effect.To solve this problem,the support vector machine(SVM) and the partial least square(PLS) were combined to increase the measurement accuracy of calorific value in this study.The combination model utilized SVM to classify coal samples into two groups according to their volatile matter contents to reduce the matrix effect,and then applied PLS to establish calibration models for each sample group respectively.The proposed model was applied to the measurement of calorific values of 53 coal samples,showing that the proposed model could greatly increase accuracy of the measurement of calorific values.Compared with the traditional PLS method,the coefficient of determination(R2) was improved from 0.93 to 0.97,the root-mean-square error of prediction was reduced from 1.68 MJ kg-1 to1.08 MJ kg-1,and the average relative error was decreased from 6.7% to 3.93%,showing an overall improvement.
文摘This work investigated and quantified the calorific values of the main branches and trunks of eleven (11) tropical trees in correlation with their chemical composition in order to assess their suitability for use as credible sources of wood fuel. The determination of the carbon, hydrogen, nitrogen, oxygen and sulphur (CHNOS) content of the samples was done using an organic elemental analyser, while an oxygen bomb calorimeter was used to experimentally determine their corresponding gross heat values. The experimental gross heat values for the branches examined ranged from 18,703.37 kJ/kg in Lophira lanceolata to 21,350.35 kJ/kg in Afzelia africana while that of the trunks ranged from 19,747.74 kJ/kg in Tectonia grandis to 22,408.68 kJ/kg in Prosopis africana. These values were within and about the expected ranges observed for tropical trees and may be considered adequate for wood fuel. The general trend in both branches and trunks was that the higher the carbon content, the higher the gross heat value of sample. The absence of sulphur in almost all the samples except, Prosopis africana, (0.055%) was indicative of the fact that the negative environmental impact with respect to harmful emissions of oxides of sulphur is practically non-existent with respect to these species. In the light of the aforementioned variables, the main branches of Afzelia africana (21,350.35 kJ/kg), Nauclea diderrichii (21,157.30 kJ/kg) and Tectonia grandis (20,257.13 kJ/kg) could be used as credible sources of firewood and charcoal production. With respect to the trunks, the timbers in order of preference would ideally be Prosopis africana (22,408.68 kJ/kg), Nauclea diderichii (21,436.42 kJ/kg) and Brachstigia eurychoma (20,924.7 kJ/kg).
文摘Solid biomass fuels are useful and cost effective renewable energy source. The energy content of biomass is determined by its calorific value. The objective of this study was to determine experimentally the gross calorific value (GCV) of different agroforestry species and bio-based industry residues that could be used by: a) companies specialized in processing raw biomass solid biofuel production, b) small-scale consumers (households, medium-sized residential buildings, etc.). The fuel samples used were from agricultural residues and wastes (rice husks, apricot kernels, olive pits, sunflower husks, cotton stems, etc.), energy crops and wetland herbs (cardoon, switchgrass, common reed, narrow-leaf cattail), and forest residues (populus, fagus, pinus). The GCV of the bio-mass samples was experimentally determined based on CEN/TS 14918:2005, and an oxygen bomb calorimeter was used (Model C5000 Adiabatic Calorimeter, IKA?-Werke, Staufen, Germany). The GCV of different agroforestry species and residues ranges from 14.3 - 25.4 MJ?kg<sup>–</sup>1. The highest GCV was obtained by seeds and kernels due to higher unit mass and higher lipid content. Pinus sylvestris with moisture content 24.59% obtained the lowest GCV (13.973 MJ?kg<sup>–</sup>1).
文摘The determination of operational parameters in the underground coal gasification(UCG)process should be considered in two aspects:first,the total coal in each UCG panel must be gasified and second,the calorific value of the produced gas should be acceptable.The main aim of this study is to present a model that meets these aspects and increasing the calorific value of syngas during this process.In order to achieve those aims,eight different increasing scenarios were devised for total gasification of coal per panel.These scenarios included:increasing oxygen injection rate(scenario 1),the amount of steam injection(scenario 2),operation time(scenario 3),cavity pressure(scenario 4),increase operation time and cavity pressure simultaneously(scenario 5),increase steam injection speed and oxygen injection rate simultaneously(scenario 6),increase in cavity pressure,operating time,steam injection rate and oxygen injection rate simultaneously(scenario 7)and also simultaneous increase in the operating time and steam injection rate(scenario 8).The results showed that for producing syngas with a higher calorific value,the following parameters had the most positive effects respectively:operation time,cavity pressure,steam injection rate and oxygen injection rate.Finally,the model validation was performed for the Centralia LBK-1 UCG pilot and the results showed that this model is very close to reality.
文摘Coal in North Korean(NKC)is one of the most important products;however,based on various strategic policies its detail properties remain opaque even for general researchers.Since there are some signs for opening of the North Korea economy,this investigation as a modest effort is going to explore principle relationships among some essential parameters of NKCs such as gross calorific value(GCV),valuable elements and conventional properties by different statistical methods.Correlations indicated that ultimate parameters(carbon,nitrogen,and hydrogen)are the best GCV predictors for NKCs in comparison with proximate parameters(ash,moisture and volatile matter).Multivariable regression demonstrated that predicted GCV based on ultimate properties has a quite accuracy when correlation of determination was 0.99.Descriptive statistics processes showed that on average,the contents of valuable elements such as Ga and V for NKCs are higher than the world coal ranges and they can be considered as byproducts of combustion of NKCs.Pearson correlations indicated that Y may have a mixed organic-inorganic affinity while Ga and V mainly occur in the inorganic part(mineral matter)of NKCs.High inter-correlations between Ga-V and Al showed that aluminosilicates can be considered as their main bring minerals.
基金initiated as part of the National Biomass Modeling Program in Continuous Forest Inventory(NBMP-CFI)funded by the State Forestry Administration of China
文摘Calorific value of plants is an important parameter for evaluating and indexing material cycles and energy conversion in forest ecosystems. Based on mensuration data of 150 sample sets, we analyzed the calorific value(CV) and ash content(AC) of different parts of Masson pine(Pinus massoniana) trees in southern China using hypothesis testing and regression analysis. CV and AC of different tree parts were almost significantly different(P<0.05). In descending order, ash-free calorific value(AFCV) ranked as foliage > branch > stem bark > root > stem wood, and AC ranked as foliage > stem bark > root > branch > stem wood. CV and AC of stem wood from the top, middle and lower sections of trees differed significantly. CV increased from the top to the lower sections of the trunk while AC decreased. Mean gross calorific value(GCV) and AFCV of aboveground parts were significantly higher than those of belowground parts(roots). The mean GCV, AFCV and AC of a whole tree of Masson pine were 21.54 kJ/g, 21.74 kJ/g and 0.90%, respectively. CV and AC of different tree parts were, to some extent, correlated with tree diameter, height and origin.
基金Project(51134008)supported by the National Natural Science Foundation of ChinaProject(2012CB720401)supported by the National Basic Research Program of China
文摘The combustion process of pulverized coal injected into blast furnace involves a lot of physical and chemical reactions. Based on the combustion behaviors of pulverized coal, the conception of coal effective calorific value representing the actual thermal energy provided for blast furnace was proposed. A cost performance evaluation model of coal injection was built up for the optimal selection of various kinds of coal based on effective calorific value. The model contains two indicators: coal effective calorific value which has eight sub-indicators and coal injection cost which includes four sub-indicators. In addition, the calculation principle and application of cost performance evaluation model in a Chinese large-scale iron and steel company were comprehensively introduced. The evaluation results finally confirm that this novel model is of great significance to the optimal selection of blast furnace pulverized coal.
文摘This paper explores the defects in fuzzy (hyper) graphs (as complex (hyper) networks) and extends the fuzzy(hyper) graphs to fuzzy (quasi) superhypergraphs as a new concept.We have modeled the fuzzy superhypergraphsas complex superhypernetworks in order to make a relation between labeled objects in the form of details andgeneralities. Indeed, the structure of fuzzy (quasi) superhypergraphs collects groups of labeled objects and analyzesthem in the form of the part to part of objects, the part of objects to the whole group of objects, and the whole tothe whole group of objects at the same time.We have investigated the properties of fuzzy (quasi) superhypergraphsbased on any positive real number as valued fuzzy (quasi) superhypergraphs, considering the complement of valuedfuzzy (quasi) superhypergraphs, the notation of isomorphism of valued fuzzy (quasi) superhypergraphs based onthe permutations, and we have presented the isomorphic conditions of (self complemented) valued fuzzy (quasi)superhypergraphs. The concept of impact membership value of fuzzy (quasi) superhypergraphs is introducedin this study and it is applied in designing the real problem in the real world. Finally, the problem of businesssuperhypernetworks is presented as an application of fuzzy valued quasi superhypergraphs in the real world.
基金supported by research grants from Regionalt Forskningsfond (RFF) Trondelag (In FeedProject number: 309859),where Nord University is the project leading institution,and Gullimunn AS and Mære Landbruksskole are project partnerssupported by the CEER project (Project number: 2021/10345) funded by the Norwegian Agency for International Cooperation and Quality Enhancement in Higher Education (HK-dir) under the Norwegian Partnership Program for Global Academic Cooperation (NORPART ) with support from the Norwegian Ministry of Education and Research (MER)。
文摘Yellow mealworm larvae(YML;Tenebrio molitor) are considered as a valuable insect species for animal feed due to their high nutritional values and ability to grow under different substrates and rearing conditions. Advances in the understanding of entomophagy and animal nutrition over the past decades have propelled research areas toward testing multiple aspects of YML to exploit them better as animal feed sources. This review aims to summarize various approaches that could be exploited to maximize the nutritional values of YML as an animal feed ingredient. In addition, YML has the potential to be used as an antimicrobial or bioactive agent to improve animal health and immune function in production animals. The dynamics of the nutritional profile of YML can be influenced by multiple factors and should be taken into account when attempting to optimize the nutrient contents of YML as an animal feed ingredient. Specifically, the use of novel land-based and aquatic feeding resources, probiotics, and the exploitation of larval gut microbiomes as novel strategies can assist to maximize the nutritional potential of YML. Selection of relevant feed supplies, optimization of ambient conditions, the introduction of novel genetic selection procedures, and implementation of effective post-harvest processing may be required in the future to commercialize mealworm production. Furthermore, the use of appropriate agricultural practices and technological improvements within the mealworm production sector should be aimed at achieving both economic and environmental sustainability. The issues highlighted in this review could pave the way for future approaches to improve the nutritional value of YML.
文摘The study of extreme weather and space events has gained paramount importance in modern society owing to rapid advances in high technology.Understanding and describing exceptional occurrences plays a crucial role in making decisive assessments of their potential impact on technical,economic,and social aspects in various fields.This research focuses on analyzing the hourly values of the auroral electrojet(AE)geomagnetic index from 1957 to 2019 by using the peak over threshold method in extreme value theory.By fitting the generalized Pareto distribution to extreme AE values,shape parameter indices were derived,revealing negative values that establish an upper bound for this time series.Consequently,it became evident that the AE values had reached a plateau,suggesting that extreme events exceeding the established upper limit are rare.As a result,although the need for diligent precautions to mitigate the consequences of such extreme events persists,surpassing the upper limit of AE values becomes increasingly challenging.It is also possible to observe an aurora in the middle-and low-latitude regions during the maximum period of the AE index.
基金supported by the Industry-University-Research Cooperation Fund Project of the Eighth Research Institute of China Aerospace Science and Technology Corporation (USCAST2022-11)Aeronautical Science Foundation of China (20220001057001)。
文摘This paper presents a novel cooperative value iteration(VI)-based adaptive dynamic programming method for multi-player differential game models with a convergence proof.The players are divided into two groups in the learning process and adapt their policies sequentially.Our method removes the dependence of admissible initial policies,which is one of the main drawbacks of the PI-based frameworks.Furthermore,this algorithm enables the players to adapt their control policies without full knowledge of others’ system parameters or control laws.The efficacy of our method is illustrated by three examples.
基金Project supported by the National Natural Science Foundation of China (No. 12002195)the National Science Fund for Distinguished Young Scholars (No. 12025204)the Program of Shanghai Municipal Education Commission (No. 2019-01-07-00-09-E00018)。
文摘The boundary value problem plays a crucial role in the analytical investigation of continuum dynamics. In this paper, an analytical method based on the Dirac operator to solve the nonlinear and non-homogeneous boundary value problem of rectangular plates is proposed. The key concept behind this method is to transform the nonlinear or non-homogeneous part on the boundary into a lateral force within the governing function by the Dirac operator, which linearizes and homogenizes the original boundary, allowing one to employ the modal superposition method for obtaining solutions to reconstructive governing equations. Once projected into the modal space, the harmonic balance method(HBM) is utilized to solve coupled ordinary differential equations(ODEs)of truncated systems with nonlinearity. To validate the convergence and accuracy of the proposed Dirac method, the results of typical examples, involving nonlinearly restricted boundaries, moment excitation, and displacement excitation, are compared with those of the differential quadrature element method(DQEM). The results demonstrate that when dealing with nonlinear boundaries, the Dirac method exhibits more excellent accuracy and convergence compared with the DQEM. However, when facing displacement excitation, there exist some discrepancies between the proposed approach and simulations;nevertheless, the proposed method still accurately predicts resonant frequencies while being uniquely capable of handling nonuniform displacement excitations. Overall, this methodology offers a convenient way for addressing nonlinear and non-homogenous plate boundaries.
基金supported by the NSF of Hebei Province(A2022208007)the NSF of China(11571089,11871191)the NSF of Henan Province(222300420397)。
文摘Clifford analysis is an important branch of modern analysis;it has a very important theoretical significance and application value,and its conclusions can be applied to the Maxwell equation,Yang-Mill field theory,quantum mechanics and value problems.In this paper,we first give the definition of a quasi-Cauchy type integral in complex Clifford analysis,and get the Plemelj formula for it.Second,we discuss the H?lder continuity for the Cauchy-type integral operators with values in a complex Clifford algebra.Finally,we prove the existence of solutions for a class of linear boundary value problems and give the integral representation for the solution.
基金the financial support of the State Key Laboratory of Engine Reliability(skler-202105)。
文摘Thermal analysis plays a key role in the online inspection of molten iron quality.Different solidification process of molten iron can be reflected by thermal analysis curves,and silicon is one of important elements affecting the solidification of molten iron.In this study,FeSi75 was added in one chamber of the dual-chamber sample cup,and the influences of FeSi75 additive on the characteristic values of thermal analysis curves and vermiculating rate were investigated.The results show that with the increase of FeSi75,the start temperature of austenite formation TALfirstly decreases and then increases,but the start temperature of eutectic growth TSEF,the lowest eutectic temperature TEU,temperature at maximum eutectic reaction rate TEM,and highest eutectic temperature TERkeep always an increase.The temperature at final solidification point TEShas little change.The FeSi75 additive has different influences on the vermiculating rate of molten iron with different vermiculation,and the vermiculating rate increases for lower vermiculation molten iron while decreases for higher one.According to the thermal analysis curves obtained by a dual-chamber sample cup with 0.30wt.%FeSi75 additive in one chamber,the vermiculating rate of molten iron can be evaluated by comparing the characteristic values of these curves.The time differenceΔtERcorresponding to the highest eutectic temperature TERhas a closer relationship with the vermiculating rate,and a parabolic regression curve between the time differenceΔtERand vermiculating rateηhas been obtained within the range of 65%to 95%,which is suitable for the qualified melt.
基金supported by Graduate Funded Project(No.JY2022A017).
文摘The frequent missing values in radar-derived time-series tracks of aerial targets(RTT-AT)lead to significant challenges in subsequent data-driven tasks.However,the majority of imputation research focuses on random missing(RM)that differs significantly from common missing patterns of RTT-AT.The method for solving the RM may experience performance degradation or failure when applied to RTT-AT imputation.Conventional autoregressive deep learning methods are prone to error accumulation and long-term dependency loss.In this paper,a non-autoregressive imputation model that addresses the issue of missing value imputation for two common missing patterns in RTT-AT is proposed.Our model consists of two probabilistic sparse diagonal masking self-attention(PSDMSA)units and a weight fusion unit.It learns missing values by combining the representations outputted by the two units,aiming to minimize the difference between the missing values and their actual values.The PSDMSA units effectively capture temporal dependencies and attribute correlations between time steps,improving imputation quality.The weight fusion unit automatically updates the weights of the output representations from the two units to obtain a more accurate final representation.The experimental results indicate that,despite varying missing rates in the two missing patterns,our model consistently outperforms other methods in imputation performance and exhibits a low frequency of deviations in estimates for specific missing entries.Compared to the state-of-the-art autoregressive deep learning imputation model Bidirectional Recurrent Imputation for Time Series(BRITS),our proposed model reduces mean absolute error(MAE)by 31%~50%.Additionally,the model attains a training speed that is 4 to 8 times faster when compared to both BRITS and a standard Transformer model when trained on the same dataset.Finally,the findings from the ablation experiments demonstrate that the PSDMSA,the weight fusion unit,cascade network design,and imputation loss enhance imputation performance and confirm the efficacy of our design.
基金This study was supported by the Humanities and Social Sciences Project of the Ministry of Education(No.23YJA790070)the Graduate Innovation Research Project of Southwest Minzu University(No.YB2022621)the Research Project of BCIMY(No.BCIMY1910).
文摘Establishing a sense of ritual within tourism consumption scenarios offers tourists the opportunity for interactive engagement.Drawing upon the value co-creation theory,this study constructed an influence mechanism model to examine tourists'active engagement in the process of co-creating tourism experience values.It employed Partial Least Squares Structural Equation Modeling(PLS-SEM)to empirically test the proposed hypotheses.The findings demonstrate that the model constructed in the present study exhibits robust reliability,validity,and explanatory power.The perception of the sense of ritual in tourism exerts a significant positive influence on tourists’co-creation of tourism experience values,thereby significantly enhancing both the communitas and flow experienced by tourists during their travels.Moreover,such communitas and flow can mediate the influence of the sense of ritual in tourism on tourists’co-creation of tourism experience values.This study contributes to advancing the current research on tourists’co-creation of tourism experience values and the sense of ritual in tourism,thereby providing theoretical foundations for cultivating a sense of ritual within tourism consumption scenarios.
基金supported by the National Natural Science Foundation of China (No.12172154)the 111 Project (No.B14044)+1 种基金the Natural Science Foundation of Gansu Province (No.23JRRA1035)the Natural Science Foundation of Anhui University of Finance and Economics (No.ACKYC20043).
文摘In this study,a wavelet multi-resolution interpolation Galerkin method(WMIGM)is proposed to solve linear singularly perturbed boundary value problems.Unlike conventional wavelet schemes,the proposed algorithm can be readily extended to special node generation techniques,such as the Shishkin node.Such a wavelet method allows a high degree of local refinement of the nodal distribution to efficiently capture localized steep gradients.All the shape functions possess the Kronecker delta property,making the imposition of boundary conditions as easy as that in the finite element method.Four numerical examples are studied to demonstrate the validity and accuracy of the proposedwavelet method.The results showthat the use ofmodified Shishkin nodes can significantly reduce numerical oscillation near the boundary layer.Compared with many other methods,the proposed method possesses satisfactory accuracy and efficiency.The theoretical and numerical results demonstrate that the order of theε-uniform convergence of this wavelet method can reach 5.
文摘This paper considers the regularity of solutions to mixed boundary value problems in small-angle regions for elliptic equations. By constructing a specific barrier function, we proved that under the assumption of sufficient regularity of boundary conditions and coefficients, as long as the angle is sufficiently small, the regularity of the solution to the mixed boundary value problem of the second-order elliptic equation can reach any order.
