To study the water absorption of hollow glass microspheres(HGMs)composite epoxy resin solid buoyancy materials in the marine environment and its effect on the mechanical properties,the water absorption was measured by...To study the water absorption of hollow glass microspheres(HGMs)composite epoxy resin solid buoyancy materials in the marine environment and its effect on the mechanical properties,the water absorption was measured by immersing the material in distilled water for 36 days at ambient temperature and fitted to Fick’s second law.The strength of materials before and after water absorption were tested by uniaxial experiments,and the effects of the filling ratio and water absorption on the mechanical properties of the materials were analyzed and explained.Finally,the failure modes and mechanism of the hollow glass microspheres composite material were explicated from the microscopic level by scanning electron microscope(SEM).This research will help solve the problems of solid buoyancy materials in ocean engineering applications.展开更多
This study aims to develop highly hygroscopic bio-based co-polyamides(CPs)by melt co-polycondensation of polyamide(PA)56 salt and PA66 salt with varying molar fractions.The functional groups and the chemical structure...This study aims to develop highly hygroscopic bio-based co-polyamides(CPs)by melt co-polycondensation of polyamide(PA)56 salt and PA66 salt with varying molar fractions.The functional groups and the chemical structure of the prepared samples were determined by Fourier transform infrared(FTIR)spectroscopy and proton nuclear magnetic resonance(^(1)H-NMR)spectroscopy.The relative viscosity was determined with an Ubbelohde viscometer.The melting behavior and the thermal stability of CPs were investigated by differential scanning calorimetry(DSC)and thermogravimetric analysis(TGA).Furthermore,the water absorption behavior of CP hot-pressed film was studied.The results reveal that the melting point,the crystallization temperature and the crystallinity of CPs firstly decrease and then increase with the molar fraction of PA66 in CPs.The copolymerization of PA56 with PA66 leads to an obvious increase in water absorption.The CPs with PA66 molar fraction of 50%possess a high saturated water absorption rate of 17.6%,compared to 11.6%for pure PA56 and 7.8%for pure PA66.展开更多
We evaluated fungal decay and mold resistance,leaching, and water absorption of nano-compounds and Paraloid B72~(PB72) in treated wood specimens to develop new methods of consolidation by combining nanoparticles and...We evaluated fungal decay and mold resistance,leaching, and water absorption of nano-compounds and Paraloid B72~(PB72) in treated wood specimens to develop new methods of consolidation by combining nanoparticles and consolidants. Scots pine wood specimens were treated with dispersions of nano-Cu O, nano-Zn O,nano-B_2O_3, nano-Ti O_2, and nano-Ce O_2. PB72 treatments of nano-particle-treated wood specimens were then carried out by either vacuum or immersion for 24 h. Previously,decayed wood specimens were also consolidated with the nano-compounds and PB72. PB72 treatments reduced element release from treated wood specimens. Nearly all nano-compounds ? PB72 treatments increased the biological performance of treated wood specimens against decay fungi tested. PB72-only treated wood specimens had the highest weight losses in decay tests. No improvements were obtained in mold resistance tests when the nanocompounds and PB72 were combined. In nano-compoundonly treatments, unleached specimens showed slightly lower water absorption values compared to untreated control specimens. Incorporation of PB72 into nano-compound-treated wood specimens resulted in considerably lower water absorption and volumetric swell. In previously decayed specimens treated with the nano-compounds and PB72 solution, water absorption after 2-h immersion declined compared to control specimens.展开更多
Brazilian disc tests were undertaken on a number of red sandstone samples with different water absorption ratios.The tensile strength of the red sandstone decreases as the water absorption ratio increases.The fracture...Brazilian disc tests were undertaken on a number of red sandstone samples with different water absorption ratios.The tensile strength of the red sandstone decreases as the water absorption ratio increases.The fracture surfaces of failed red sandstone discs were scanned by Talysurf CLI 2000.With the aid of Talymap Gold software,based on ISO25178,a set of statistical parameters was obtained for the fracture surfaces.The maximum peak height(S_p),maximum pit height(S_v) and maximum height(S_z) of the fracture surfaces exhibited the same decreasing trend with increasing water absorption.Sa and Sku values for the fracture surfaces showed a downward trend as the water absorption ratio increased.The fractal dimensions of fracture surfaces were calculated and found to decrease as the water absorption ratio increased.Through analysis of PSD curves,the smallest dominant wavelength was observed to reflect the roughness of the fracture surfaces.Additionally,the results suggest that the roughness of fracture surfaces becomes small as the water absorption ratio increases.展开更多
A simple on-line sonodigestion system was successfully used for breakdown organic nickel complexes in environmental waters acidified with diluted nitric acid prior to flow injection total dissolved nickel preconcentra...A simple on-line sonodigestion system was successfully used for breakdown organic nickel complexes in environmental waters acidified with diluted nitric acid prior to flow injection total dissolved nickel preconcentration in a microcolumn containing a chelating resin (Chelite Che with iminodiacetic acid groups) and determination by flame atomic absorption spectrometry. For the determination of the dissolved labile nickel fraction, microcolumns packed with the chelating resin were loaded in-situ with the sample without sample pH modification, and once in the laboratory were inserted in the flow injection device where nickel elution-detection was carried out. The performance of the chelating resin was investigated in order to elucidate its behavior in the presence of dissolved nickel species. The results obtained reveal that the resin, at the experimental employed conditions, retained only dissolved free nickel ions and nickel bound to weak complexes (labile fraction). The figures of merit for determinations in both nickel fractions are given and the obtained values are discussed. The speciation scheme is applied to the analysis of nickel in river and seawater samples collected in Galicia (Northwest, Spain). The results of fractionation showed that Ni are mainly in the dissolved labile fraction in river water, while in seawater samples analyzed was mainly present in the organic fraction.展开更多
The main objectives of this research were to study the effect of water absorption on mechanical properties of hybrid fiber reinforcement for polypropylene composites. The poor resistance towards water absorption is on...The main objectives of this research were to study the effect of water absorption on mechanical properties of hybrid fiber reinforcement for polypropylene composites. The poor resistance towards water absorption is one of the draw- backs of natural fibers. Hybrid filler-polypropylene composites are subjected to water immersion tests in order to study the effects of water absorption on the mechanical properties. Composites specimens containing 30 phr and 40 phr fiber weight were prepared by melt blending process. Water absorption tests were conducted by immersion specimens in distilled water at room temperature for different time durations (24, 48, 72, 96, 120, 144, 168, 192 hours). The tensile, flexural and impact properties were investigated before and after water absorption. The percentage of moisture uptake increased as the increasing order of the filler loading due to the high cellulose content. The phase morphology of wood flour/wheat husk polypropylene hybrid composites were investigated by SEM, the dynamic mechanical properties of the composite are analyzed by DMA & wheat, wood filler interaction are analyzed by FT-IR.展开更多
The water absorption kinetics of three cowpea varieties (Asontem, Hewale and Asomdwee) was studied following the phenomenological models derived from Fick’s law of diffusion. Soaking of seeds from each cowpea variety...The water absorption kinetics of three cowpea varieties (Asontem, Hewale and Asomdwee) was studied following the phenomenological models derived from Fick’s law of diffusion. Soaking of seeds from each cowpea variety was carried out for 10 h at four temperatures (30°C, 40°C, 50°C and 60°C). The saturation moisture content was higher for Asontem (106.9 g water/1000 g dry weight) and Hewale varieties (108.7 g water/1000 g dry weight) and lower for Asomdwee hybrid (100.7 g water/1000 g dry weight), respectively. The proposed Fick’s law of diffusion satisfactorily described the kinetics of water absorption regardless of the variety and temperature. The estimated values for water diffusion coefficient for Asontem, Hewale and Asomdwee varied from 5.12 × 10-10 m2/s to 6.64 × 10-10 m2/s, 3.96 × 10-10 m2/s to 5.12 × 10-10 m2/s, 4.93 × 10-10 m2/s to 6.08 × 10-10 m2/s, respectively. The strong influence of temperature on the water diffusion coefficient was adequately described by an Arrhenius-type equation with activation energy values for Asontem, Hewale and Asomdwee as 7.27 kJ/mol, 7.26 kJ/mol and 6.26 kJ/mol, respectively.展开更多
A simple, economical, and sensitive capillary electrophoresis (CE) method integrated with capacitively coupled contactless conductivity detection was developed for the determination of metal ions such as K<sup>+...A simple, economical, and sensitive capillary electrophoresis (CE) method integrated with capacitively coupled contactless conductivity detection was developed for the determination of metal ions such as K<sup>+</sup>, Na<sup>+</sup>, Mg<sup>2+</sup>, Sr<sup>2+</sup>, Ca<sup>2+</sup> in drinking water. 18-Crown-6 ether and Hexadecyltrimethylammonium Bromide (CTAB) were employed as complexing reagents. The effects of electrolyte additives, citric acid buffer solution, and other separation conditions of CE were comprehensively investigated and carefully optimized. The best results were obtained in a running buffer solution composed of citric acid (12 mM), 18-crown-6 ether (0.2 mM), and CTAB (0.015 mM) at pH 3.5. Under these conditions, a complete separation of five metal ions was successfully achieved in less than 12 min. The limits of detection for the optimal procedure were determined to be in the range of 0.02 - 0.2 mg·L<sup>-1</sup>. The repeatability with respect to migration times and peak areas, expressed as relative standard deviations, was better than 2.3% and 5.1%, respectively. Evaluation of the efficiency of the methodology indicated that it was reliable for the determination of metal ions in six different brands of drinking water samples.展开更多
The electrochemical impedance spectroscopy (EIS) was used to evaluate the water transport and dielectric properties of polyurethane films filled with nano-TiO2 at different pigment/base (P/B) values in 0.5 mol/L NaCl ...The electrochemical impedance spectroscopy (EIS) was used to evaluate the water transport and dielectric properties of polyurethane films filled with nano-TiO2 at different pigment/base (P/B) values in 0.5 mol/L NaCl solutions. EIS results were compared with gravimetric measurements on the freestanding films. The amount of water absorption showed great discrepancy between the two methods. The diffusion coeffcient in the polyurethane film with P/B=30% was the smallest among those filled with nano-TiO2 pigments. The dielectric constant ε of the polyurethane varnish film obtained from the initial capacitance was in the range of typical values of polymers. SEM was used to measure the distribution of nano-TiO2 particles in the polyurethane films.展开更多
China’s coastal waters are turbid and the properties of the seabed are complex. This negatively impacts the performance of underwater detection equipment. The properties of sound absorption in turbid water are not we...China’s coastal waters are turbid and the properties of the seabed are complex. This negatively impacts the performance of underwater detection equipment. The properties of sound absorption in turbid water are not well understood. In this paper, the coefficient of sound absorption in turbid water was measured by the reverberation technique. All work was done in a reverberation barrel made of seamless aluminum. First, pure water was poured into the reverberation barrel and its reverberation time measured. Next, various concentrations of turbid water were poured into the barrel and their reverberation time measured. After all data had been gathered, the coefficient of sound absorption in turbid water of different concentrations was calculated. From this we determined a law of sound absorption in turbid water as summarized in the paper.展开更多
The appropriate content and distribution of sinter moisture play an important role in the granulation of iron ores.In this study,the effects of porosity,size distribution,and particle shape on the water absorption rat...The appropriate content and distribution of sinter moisture play an important role in the granulation of iron ores.In this study,the effects of porosity,size distribution,and particle shape on the water absorption rate(WAR)of four types of iron ores were analyzed by using the immersion method and capillary water absorption method.In addition,the mechanism underlying the water absorption process in iron ores was unraveled.It is found that the WARs of iron ores decrease quickly with the increase in water absorption time at the initial stages of water absorption.With further increase in absorption time,the WARs decrease gradually,until near 0.Iron ores with higher porosity,smaller particle size,and plate-like structure have the higher WARs.Compared with pores in the single-particle iron ore,voids among particles in the multi-particle iron oxide play an important role at the initial stages of water absorption.The water absorption mechanism of all single-particle and multi-particle iron ores analyzed in this study includes four steps,wherein the first three steps play a significant role in the sintering process.展开更多
Establishing the remote sensing algorithm of retrieving the absorption coefficient of seawater petroleum substances is an efficient way to improve the accuracy of retrieving a seawater petroleum concentration using a ...Establishing the remote sensing algorithm of retrieving the absorption coefficient of seawater petroleum substances is an efficient way to improve the accuracy of retrieving a seawater petroleum concentration using a remote sensing technology. A remote sensing reflectance is a basic physical parameter in water color remote sensing. Apply it to directly retrieve the absorption coefficient of seawater petroleum substances is of potential advantage. The absorption coefficient of waters containing petroleum [ACWCP, a_o(λ)], consists of the absorption coefficient of pure water [ACPW, a_w(λ)], plankton [ACP, a_(ph)(λ)], colored scraps [ACCS, a_(d,g)(λ)], and petroleum substance [ACPS, a_(oil)(λ)]. Among those, ACCS consists of the absorption coefficient of nonalgal particle [ACNP, a_d(λ)] and colored dissolved organic matter [ACCDOM, a_g(λ)]. For waters containing petroleum, the retrieved ACCS using the existing method is a combination absorption coefficient of ACNP,ACCDOM and ACPA [CAC, a_(d,g,oil)(λ)]. Therefore, the principle question is how to extract ACPS from CAC.Through the analysis of the three proportion tests conducted between the year of 2013 and 2015 and the corresponding remote sensing data, an algorithm of retrieving the absorption coefficient of petroleum substances is proposed based on remote sensing reflectance. First of all, ACPS and CAC are retrieved from the reflectance using the quasi-analytical algorithm(QAA), with some parameter modified. Secondly, given the fact that the backscatter coefficient [BC, b_(bp)(555)] of total particles at 555 nm can be obtained completely from the reflectance, the relation between BC and ACNP in petroleum contaminated water can be established. As a result, ACNP can be calculated. Then, combining the remote sensing retrieving algorithm of a_g(440), the method of achieving the spectral slope of the absorption coefficient can be established, from which ACCDOM,can be calculated. Finally, ACPS can be computed as the residual. The accuracy of ACPS based on this algorithm is 86% compared with the in situ measurements.展开更多
A novel approach was developed for the determination of ultratrace amounts of copper in water samples by using electrothermal atomic absorption spectrometry(ETAAS) after cloud point extraction(CPE). 1-(2-Pyridyl...A novel approach was developed for the determination of ultratrace amounts of copper in water samples by using electrothermal atomic absorption spectrometry(ETAAS) after cloud point extraction(CPE). 1-(2-Pyridylazo)-2-naphthol was used as the chelating reagent and Triton X-114 as the micellar-forming surfactant. CPE was conducted in a pH 8.0 medium at 40 ℃ for 10 min. After the separation of the phases by centrifugation, the surfactant-rich phase was diluted with 1 mL of a methanol solution of 0.1 mol/L HNO3. Then 20 μL of the diluted surfactant-rich phase was injected into the graphite furnace for atomization in the absence of any matrix modifier. Various experimental conditions that affect the extraction and atomization processes were optimized. A detection limit of 5 ng/L was obtained after preconcentration. The linear dynamic range of the copper mass concentration was found to be 02.0 ng/mL, and the relative standard deviation was found to be less than 3.1% for a sample containing 1.0 ng/mL Cu(Ⅱ). This developed method was successfully applied to the determination of ultratrace amounts of Cu in drinking water, tap water, and seawater samples.展开更多
A simplified dual-pressure ammonia-water absorption power cycle(DPAPC-a) using low grade energy resources is presented and analyzed.This cycle uses turbine exhaust heat to distill the basic solution for desorption.The...A simplified dual-pressure ammonia-water absorption power cycle(DPAPC-a) using low grade energy resources is presented and analyzed.This cycle uses turbine exhaust heat to distill the basic solution for desorption.The structure of the cycle is simple which comprises evaporator,turbine,regenerator(desorber),absorber,pump and throttle valves for both diluted solution and vapor.And it is of high efficiency,because the working medium has large temperature difference in evaporation and small temperature difference in absorptive condensation,which can match the sensible exothermal heat resource and the cooling water simultaneously.Orthogonal calculation was made to investigate the influence of the working concentration,the basic concentration and the circulation multiple on the cycle performance,with 85-110 ℃ heat resource and 20-32 ℃ cooling water.An optimum scheme was given in the condition of 110 ℃ sensitive heat resource and 20 ℃ cooling water,with the working concentration of 0.6,basic concentration of 0.385,and circulation multiple of 5.The thermal efficiency and the power recovery efficiency are 8.06 % and 6.66%,respectively.The power recovery efficiency of the DPAPC-a is 28.8% higher than that of the steam Rankine cycle(SRC) and 12.7% higher than that of ORC(R134a) under the optimized situation.展开更多
Hydrophobic membrane can provide fast mass transfer for absorption-desorption of gasesform liquid to absorbent.The removal of ammonia from ammonia water and absorption with dilutesulphuric acid was studied in a pilot ...Hydrophobic membrane can provide fast mass transfer for absorption-desorption of gasesform liquid to absorbent.The removal of ammonia from ammonia water and absorption with dilutesulphuric acid was studied in a pilot plant with polypropylene hollow fiber column,The removalrate and influences of operation temperature,flow rate and concentration on mass transferperformances were discussed mathematically.Experimental results and computer calculation show thatthe ammonia removal rate is not affected by the feed concentration for a given system.Both partialand overall mass transfer coefficients vary along the axis of the fiber,and the mass transfer for themembrane process is controlled by membrane resistance.展开更多
The Lop Nur dry salt lake,Xinjiang province,is charactered by typical physiognomy salt-crust,located in39.6-41.3N.latitude and 89.6-91.4E.longitude.The thickness of salt-crust is about from 20 cm to 100 cm。
The capillary absorption of water by unsaturated cement-based material is the main reason of degradation of the structures subjected to an aggressive environment since water often acts as the transporting medium for d...The capillary absorption of water by unsaturated cement-based material is the main reason of degradation of the structures subjected to an aggressive environment since water often acts as the transporting medium for damaging contaminants.It is well known that the capillarity coefficient and sorptivity are two important parameters to characterize the water absorption of porous materials.Generally,the former is used to describe the penetration depth or height of water transport,which must be measured by special and advanced equipment.In contrast,the sorptivity represents the relationship between cumulative volume of water uptake and the square root of the elapsed time,which can be easily measured by the gravimetric method in a normal laboratory condition.In the present study,an analytical method is developed to build up a bridge between these two parameters,with the purpose that the sorptivity or the gravimetric method can be used to predict the penetration depth of water absorption.Additionally,a new model to explain the dependence of sorptivity on initial water content of the material is developed in order to fit the in situ condition.The comparison of predicted results by the analytical method with experimental data or numerical calculation results,as well as some previous models,validates the feasibility of the methods presented in this paper.展开更多
The development of NCZ-1 dust-sticking agent was first intreduced in china. The speed of water absorption of dust-stick-ing agent was measured and studied on mining site and in laboratory, and then the law of water ab...The development of NCZ-1 dust-sticking agent was first intreduced in china. The speed of water absorption of dust-stick-ing agent was measured and studied on mining site and in laboratory, and then the law of water absorption of dust-sticking agent was analyzed. In addition, the mathematical model of the loss rate of dust-sticking agent was established by the application of fluid mechanics theory, and the method of determining the sprinkle parameters of dust-sticking agent was obtained. Through practical verifi-cation, it is found that the error of this mathematical model is less than 10%. So it can be used in the field.展开更多
基金financially supported by the Natural Science Foundation of Liaoning Province(Grant No.2021-MS-109)。
文摘To study the water absorption of hollow glass microspheres(HGMs)composite epoxy resin solid buoyancy materials in the marine environment and its effect on the mechanical properties,the water absorption was measured by immersing the material in distilled water for 36 days at ambient temperature and fitted to Fick’s second law.The strength of materials before and after water absorption were tested by uniaxial experiments,and the effects of the filling ratio and water absorption on the mechanical properties of the materials were analyzed and explained.Finally,the failure modes and mechanism of the hollow glass microspheres composite material were explicated from the microscopic level by scanning electron microscope(SEM).This research will help solve the problems of solid buoyancy materials in ocean engineering applications.
基金National Key Research and Development Program of China(No.2017YFB0309400).
文摘This study aims to develop highly hygroscopic bio-based co-polyamides(CPs)by melt co-polycondensation of polyamide(PA)56 salt and PA66 salt with varying molar fractions.The functional groups and the chemical structure of the prepared samples were determined by Fourier transform infrared(FTIR)spectroscopy and proton nuclear magnetic resonance(^(1)H-NMR)spectroscopy.The relative viscosity was determined with an Ubbelohde viscometer.The melting behavior and the thermal stability of CPs were investigated by differential scanning calorimetry(DSC)and thermogravimetric analysis(TGA).Furthermore,the water absorption behavior of CP hot-pressed film was studied.The results reveal that the melting point,the crystallization temperature and the crystallinity of CPs firstly decrease and then increase with the molar fraction of PA66 in CPs.The copolymerization of PA56 with PA66 leads to an obvious increase in water absorption.The CPs with PA66 molar fraction of 50%possess a high saturated water absorption rate of 17.6%,compared to 11.6%for pure PA56 and 7.8%for pure PA66.
基金financially supported by the Coordination Unit for Scientific Research of Istanbul University,Turkey(Project No:45503)
文摘We evaluated fungal decay and mold resistance,leaching, and water absorption of nano-compounds and Paraloid B72~(PB72) in treated wood specimens to develop new methods of consolidation by combining nanoparticles and consolidants. Scots pine wood specimens were treated with dispersions of nano-Cu O, nano-Zn O,nano-B_2O_3, nano-Ti O_2, and nano-Ce O_2. PB72 treatments of nano-particle-treated wood specimens were then carried out by either vacuum or immersion for 24 h. Previously,decayed wood specimens were also consolidated with the nano-compounds and PB72. PB72 treatments reduced element release from treated wood specimens. Nearly all nano-compounds ? PB72 treatments increased the biological performance of treated wood specimens against decay fungi tested. PB72-only treated wood specimens had the highest weight losses in decay tests. No improvements were obtained in mold resistance tests when the nanocompounds and PB72 were combined. In nano-compoundonly treatments, unleached specimens showed slightly lower water absorption values compared to untreated control specimens. Incorporation of PB72 into nano-compound-treated wood specimens resulted in considerably lower water absorption and volumetric swell. In previously decayed specimens treated with the nano-compounds and PB72 solution, water absorption after 2-h immersion declined compared to control specimens.
基金Project(E21527)supported by Open Research Fund Program of Hunan Provincial Key Laboratory of Shale Gas Resource Utilization,Hunan University of Science and Technology,ChinaProjects(51174088,51174228)supported by the National Natural Science Foundation of China+1 种基金Project(2013CB035401)supported by the National Basic Research Program of ChinaProject(2015zzts077)supported by the Fundamental Research Funds for the Central Universities,China
文摘Brazilian disc tests were undertaken on a number of red sandstone samples with different water absorption ratios.The tensile strength of the red sandstone decreases as the water absorption ratio increases.The fracture surfaces of failed red sandstone discs were scanned by Talysurf CLI 2000.With the aid of Talymap Gold software,based on ISO25178,a set of statistical parameters was obtained for the fracture surfaces.The maximum peak height(S_p),maximum pit height(S_v) and maximum height(S_z) of the fracture surfaces exhibited the same decreasing trend with increasing water absorption.Sa and Sku values for the fracture surfaces showed a downward trend as the water absorption ratio increased.The fractal dimensions of fracture surfaces were calculated and found to decrease as the water absorption ratio increased.Through analysis of PSD curves,the smallest dominant wavelength was observed to reflect the roughness of the fracture surfaces.Additionally,the results suggest that the roughness of fracture surfaces becomes small as the water absorption ratio increases.
文摘A simple on-line sonodigestion system was successfully used for breakdown organic nickel complexes in environmental waters acidified with diluted nitric acid prior to flow injection total dissolved nickel preconcentration in a microcolumn containing a chelating resin (Chelite Che with iminodiacetic acid groups) and determination by flame atomic absorption spectrometry. For the determination of the dissolved labile nickel fraction, microcolumns packed with the chelating resin were loaded in-situ with the sample without sample pH modification, and once in the laboratory were inserted in the flow injection device where nickel elution-detection was carried out. The performance of the chelating resin was investigated in order to elucidate its behavior in the presence of dissolved nickel species. The results obtained reveal that the resin, at the experimental employed conditions, retained only dissolved free nickel ions and nickel bound to weak complexes (labile fraction). The figures of merit for determinations in both nickel fractions are given and the obtained values are discussed. The speciation scheme is applied to the analysis of nickel in river and seawater samples collected in Galicia (Northwest, Spain). The results of fractionation showed that Ni are mainly in the dissolved labile fraction in river water, while in seawater samples analyzed was mainly present in the organic fraction.
文摘The main objectives of this research were to study the effect of water absorption on mechanical properties of hybrid fiber reinforcement for polypropylene composites. The poor resistance towards water absorption is one of the draw- backs of natural fibers. Hybrid filler-polypropylene composites are subjected to water immersion tests in order to study the effects of water absorption on the mechanical properties. Composites specimens containing 30 phr and 40 phr fiber weight were prepared by melt blending process. Water absorption tests were conducted by immersion specimens in distilled water at room temperature for different time durations (24, 48, 72, 96, 120, 144, 168, 192 hours). The tensile, flexural and impact properties were investigated before and after water absorption. The percentage of moisture uptake increased as the increasing order of the filler loading due to the high cellulose content. The phase morphology of wood flour/wheat husk polypropylene hybrid composites were investigated by SEM, the dynamic mechanical properties of the composite are analyzed by DMA & wheat, wood filler interaction are analyzed by FT-IR.
文摘The water absorption kinetics of three cowpea varieties (Asontem, Hewale and Asomdwee) was studied following the phenomenological models derived from Fick’s law of diffusion. Soaking of seeds from each cowpea variety was carried out for 10 h at four temperatures (30°C, 40°C, 50°C and 60°C). The saturation moisture content was higher for Asontem (106.9 g water/1000 g dry weight) and Hewale varieties (108.7 g water/1000 g dry weight) and lower for Asomdwee hybrid (100.7 g water/1000 g dry weight), respectively. The proposed Fick’s law of diffusion satisfactorily described the kinetics of water absorption regardless of the variety and temperature. The estimated values for water diffusion coefficient for Asontem, Hewale and Asomdwee varied from 5.12 × 10-10 m2/s to 6.64 × 10-10 m2/s, 3.96 × 10-10 m2/s to 5.12 × 10-10 m2/s, 4.93 × 10-10 m2/s to 6.08 × 10-10 m2/s, respectively. The strong influence of temperature on the water diffusion coefficient was adequately described by an Arrhenius-type equation with activation energy values for Asontem, Hewale and Asomdwee as 7.27 kJ/mol, 7.26 kJ/mol and 6.26 kJ/mol, respectively.
文摘A simple, economical, and sensitive capillary electrophoresis (CE) method integrated with capacitively coupled contactless conductivity detection was developed for the determination of metal ions such as K<sup>+</sup>, Na<sup>+</sup>, Mg<sup>2+</sup>, Sr<sup>2+</sup>, Ca<sup>2+</sup> in drinking water. 18-Crown-6 ether and Hexadecyltrimethylammonium Bromide (CTAB) were employed as complexing reagents. The effects of electrolyte additives, citric acid buffer solution, and other separation conditions of CE were comprehensively investigated and carefully optimized. The best results were obtained in a running buffer solution composed of citric acid (12 mM), 18-crown-6 ether (0.2 mM), and CTAB (0.015 mM) at pH 3.5. Under these conditions, a complete separation of five metal ions was successfully achieved in less than 12 min. The limits of detection for the optimal procedure were determined to be in the range of 0.02 - 0.2 mg·L<sup>-1</sup>. The repeatability with respect to migration times and peak areas, expressed as relative standard deviations, was better than 2.3% and 5.1%, respectively. Evaluation of the efficiency of the methodology indicated that it was reliable for the determination of metal ions in six different brands of drinking water samples.
基金supported by the National Natural Science Foundation of China(No.50499334)
文摘The electrochemical impedance spectroscopy (EIS) was used to evaluate the water transport and dielectric properties of polyurethane films filled with nano-TiO2 at different pigment/base (P/B) values in 0.5 mol/L NaCl solutions. EIS results were compared with gravimetric measurements on the freestanding films. The amount of water absorption showed great discrepancy between the two methods. The diffusion coeffcient in the polyurethane film with P/B=30% was the smallest among those filled with nano-TiO2 pigments. The dielectric constant ε of the polyurethane varnish film obtained from the initial capacitance was in the range of typical values of polymers. SEM was used to measure the distribution of nano-TiO2 particles in the polyurethane films.
文摘China’s coastal waters are turbid and the properties of the seabed are complex. This negatively impacts the performance of underwater detection equipment. The properties of sound absorption in turbid water are not well understood. In this paper, the coefficient of sound absorption in turbid water was measured by the reverberation technique. All work was done in a reverberation barrel made of seamless aluminum. First, pure water was poured into the reverberation barrel and its reverberation time measured. Next, various concentrations of turbid water were poured into the barrel and their reverberation time measured. After all data had been gathered, the coefficient of sound absorption in turbid water of different concentrations was calculated. From this we determined a law of sound absorption in turbid water as summarized in the paper.
基金financially supported by the National Natural Science Foundation of China(No.U1260202)the Fundamental Research Funds for the Central Universities(No.FRF-MP-12-003B)
文摘The appropriate content and distribution of sinter moisture play an important role in the granulation of iron ores.In this study,the effects of porosity,size distribution,and particle shape on the water absorption rate(WAR)of four types of iron ores were analyzed by using the immersion method and capillary water absorption method.In addition,the mechanism underlying the water absorption process in iron ores was unraveled.It is found that the WARs of iron ores decrease quickly with the increase in water absorption time at the initial stages of water absorption.With further increase in absorption time,the WARs decrease gradually,until near 0.Iron ores with higher porosity,smaller particle size,and plate-like structure have the higher WARs.Compared with pores in the single-particle iron ore,voids among particles in the multi-particle iron oxide play an important role at the initial stages of water absorption.The water absorption mechanism of all single-particle and multi-particle iron ores analyzed in this study includes four steps,wherein the first three steps play a significant role in the sintering process.
基金The National Natural Science Foundation of China under contract No.41271364the Key Projects in the National Science and Technology Pillar Program of China under contract No.2012BAH32B01-4the Program for Scientific Research Start-up Funds of Guangdong Ocean University under contract No.E16187
文摘Establishing the remote sensing algorithm of retrieving the absorption coefficient of seawater petroleum substances is an efficient way to improve the accuracy of retrieving a seawater petroleum concentration using a remote sensing technology. A remote sensing reflectance is a basic physical parameter in water color remote sensing. Apply it to directly retrieve the absorption coefficient of seawater petroleum substances is of potential advantage. The absorption coefficient of waters containing petroleum [ACWCP, a_o(λ)], consists of the absorption coefficient of pure water [ACPW, a_w(λ)], plankton [ACP, a_(ph)(λ)], colored scraps [ACCS, a_(d,g)(λ)], and petroleum substance [ACPS, a_(oil)(λ)]. Among those, ACCS consists of the absorption coefficient of nonalgal particle [ACNP, a_d(λ)] and colored dissolved organic matter [ACCDOM, a_g(λ)]. For waters containing petroleum, the retrieved ACCS using the existing method is a combination absorption coefficient of ACNP,ACCDOM and ACPA [CAC, a_(d,g,oil)(λ)]. Therefore, the principle question is how to extract ACPS from CAC.Through the analysis of the three proportion tests conducted between the year of 2013 and 2015 and the corresponding remote sensing data, an algorithm of retrieving the absorption coefficient of petroleum substances is proposed based on remote sensing reflectance. First of all, ACPS and CAC are retrieved from the reflectance using the quasi-analytical algorithm(QAA), with some parameter modified. Secondly, given the fact that the backscatter coefficient [BC, b_(bp)(555)] of total particles at 555 nm can be obtained completely from the reflectance, the relation between BC and ACNP in petroleum contaminated water can be established. As a result, ACNP can be calculated. Then, combining the remote sensing retrieving algorithm of a_g(440), the method of achieving the spectral slope of the absorption coefficient can be established, from which ACCDOM,can be calculated. Finally, ACPS can be computed as the residual. The accuracy of ACPS based on this algorithm is 86% compared with the in situ measurements.
基金the Analysis and Testing Foundation of Zhejiang Province(No 04045)
文摘A novel approach was developed for the determination of ultratrace amounts of copper in water samples by using electrothermal atomic absorption spectrometry(ETAAS) after cloud point extraction(CPE). 1-(2-Pyridylazo)-2-naphthol was used as the chelating reagent and Triton X-114 as the micellar-forming surfactant. CPE was conducted in a pH 8.0 medium at 40 ℃ for 10 min. After the separation of the phases by centrifugation, the surfactant-rich phase was diluted with 1 mL of a methanol solution of 0.1 mol/L HNO3. Then 20 μL of the diluted surfactant-rich phase was injected into the graphite furnace for atomization in the absence of any matrix modifier. Various experimental conditions that affect the extraction and atomization processes were optimized. A detection limit of 5 ng/L was obtained after preconcentration. The linear dynamic range of the copper mass concentration was found to be 02.0 ng/mL, and the relative standard deviation was found to be less than 3.1% for a sample containing 1.0 ng/mL Cu(Ⅱ). This developed method was successfully applied to the determination of ultratrace amounts of Cu in drinking water, tap water, and seawater samples.
基金Project(50976022) supported by the National Natural Science Foundation of ChinaProject(BY2011155) supported by Science and Technology Innovation and Transformation of Achievements of Special Fund of Jiangsu Province, China
文摘A simplified dual-pressure ammonia-water absorption power cycle(DPAPC-a) using low grade energy resources is presented and analyzed.This cycle uses turbine exhaust heat to distill the basic solution for desorption.The structure of the cycle is simple which comprises evaporator,turbine,regenerator(desorber),absorber,pump and throttle valves for both diluted solution and vapor.And it is of high efficiency,because the working medium has large temperature difference in evaporation and small temperature difference in absorptive condensation,which can match the sensible exothermal heat resource and the cooling water simultaneously.Orthogonal calculation was made to investigate the influence of the working concentration,the basic concentration and the circulation multiple on the cycle performance,with 85-110 ℃ heat resource and 20-32 ℃ cooling water.An optimum scheme was given in the condition of 110 ℃ sensitive heat resource and 20 ℃ cooling water,with the working concentration of 0.6,basic concentration of 0.385,and circulation multiple of 5.The thermal efficiency and the power recovery efficiency are 8.06 % and 6.66%,respectively.The power recovery efficiency of the DPAPC-a is 28.8% higher than that of the steam Rankine cycle(SRC) and 12.7% higher than that of ORC(R134a) under the optimized situation.
文摘Hydrophobic membrane can provide fast mass transfer for absorption-desorption of gasesform liquid to absorbent.The removal of ammonia from ammonia water and absorption with dilutesulphuric acid was studied in a pilot plant with polypropylene hollow fiber column,The removalrate and influences of operation temperature,flow rate and concentration on mass transferperformances were discussed mathematically.Experimental results and computer calculation show thatthe ammonia removal rate is not affected by the feed concentration for a given system.Both partialand overall mass transfer coefficients vary along the axis of the fiber,and the mass transfer for themembrane process is controlled by membrane resistance.
基金The project supported by the Foundation for the Author of National Excellent Doctoral Dissertation of China (200428)the National Natural Science Foundation of China (10272072and 50424913)the Shanghai Natural Science Foundation(05ZR14048)
文摘The Lop Nur dry salt lake,Xinjiang province,is charactered by typical physiognomy salt-crust,located in39.6-41.3N.latitude and 89.6-91.4E.longitude.The thickness of salt-crust is about from 20 cm to 100 cm。
基金supported by the Key Programs of Ministry of Education of China(Grant No.109046)the Scientific Research Foundation for the Returned Overseas Chinese Scholars,State Eduation Ministrythe Program of Innovative Research Team of Education of China(Grant No.IRT0518)
文摘The capillary absorption of water by unsaturated cement-based material is the main reason of degradation of the structures subjected to an aggressive environment since water often acts as the transporting medium for damaging contaminants.It is well known that the capillarity coefficient and sorptivity are two important parameters to characterize the water absorption of porous materials.Generally,the former is used to describe the penetration depth or height of water transport,which must be measured by special and advanced equipment.In contrast,the sorptivity represents the relationship between cumulative volume of water uptake and the square root of the elapsed time,which can be easily measured by the gravimetric method in a normal laboratory condition.In the present study,an analytical method is developed to build up a bridge between these two parameters,with the purpose that the sorptivity or the gravimetric method can be used to predict the penetration depth of water absorption.Additionally,a new model to explain the dependence of sorptivity on initial water content of the material is developed in order to fit the in situ condition.The comparison of predicted results by the analytical method with experimental data or numerical calculation results,as well as some previous models,validates the feasibility of the methods presented in this paper.
文摘The development of NCZ-1 dust-sticking agent was first intreduced in china. The speed of water absorption of dust-stick-ing agent was measured and studied on mining site and in laboratory, and then the law of water absorption of dust-sticking agent was analyzed. In addition, the mathematical model of the loss rate of dust-sticking agent was established by the application of fluid mechanics theory, and the method of determining the sprinkle parameters of dust-sticking agent was obtained. Through practical verifi-cation, it is found that the error of this mathematical model is less than 10%. So it can be used in the field.