Silicon-based material is an important anode material for next-generation lithium-ion batteries.In order to overcome its shortcomings,carbon coating is often employed to improve the electrochemical performance.However...Silicon-based material is an important anode material for next-generation lithium-ion batteries.In order to overcome its shortcomings,carbon coating is often employed to improve the electrochemical performance.However,the carbon source,carbon content,and different contact and mixing schemes between carbon sources and silicon are all complex factors and need to be clarified.In this study,nano-silicon is coated by the chemical vapor deposition method using different carbon sources,such as acetylene,methane,propane,and propylene.Carbon content after coating is designed to stay at the same level to reduce the experimental error.Results show the sample with higher conductivity provides higher cycle performance.Propylene is the best choice of the four carbon sources studied in this work.These results indicate that the selection of the carbon source is an important factor that plays a significant role in electrochemical performance.展开更多
With Biolog Eco microplate, metabolic characteristics and functional diver-sity of carbon source in microflora of ponds were researched based on recitculating ponds and control ponds in order to explore effects of eco...With Biolog Eco microplate, metabolic characteristics and functional diver-sity of carbon source in microflora of ponds were researched based on recitculating ponds and control ponds in order to explore effects of eco-adjustments on microflo-ra in ponds. The results indicate that total number of bacterium, microbial metabolism activity, and diversity index in P7, P8, P1 and P2 kept higher, fol owed by P3, P4, P5 and P6. The utilization rate of microbes on sugars achieved the highest （31.0%-48.7%）, fol owed by carboxylic acid （13.4%-18.0%）, amino acid （10.1%-20.5%）, polymers （9.4%-17.0%）, biopolymer （5.7%-9.7%） and phenol （4.95%-7.50%）. Principal component analysis divided microflora in different ponds, suggesting that microbial community has varied carbon source characteristics and nitrogen-containing compound and biopolymer metabolisms are most affected.展开更多
[Objective]In order to increase anther culture efficiency of pepper.[Method]MS culture media and Bolajiaohong were used in this experiment to study the influences of carbon sources and concentrations on anther callus ...[Objective]In order to increase anther culture efficiency of pepper.[Method]MS culture media and Bolajiaohong were used in this experiment to study the influences of carbon sources and concentrations on anther callus induction of pepper.Jiayu was taken as a material to study influences of plant growth regulators and concentrations on anther callus induction of pepper according to L16（4^5） orthogonal design.[Result]The average callus and embryoid induction rates of maltose at all concentrations were higher than these of sucrose but the difference was not significant.Taking maltose or sucrose as a carbon source,3% to 6% concentration was good for increasing induction frequencies of calli and embryoids.However,If the concentration was over 6%,the induction rates were declined dramatically with the increase of sugar concentration.The influences of growth regulators on induction rate of calli were listed as 2,4-D﹥ZT﹥NAA﹥KT﹥6-BA;the influences on induction rates of embryoids were listed as 2,4-D﹥NAA﹥ZT﹥KT﹥6-BA.The 2,4-D,ZT,NAA and KT had signficant or extremely significant influences on induction rates of calli and embryoids.2,4-D,ZT at 1.0 mg/L and NNA,KT at 0.5 mg/L had the best effects.The influences of ZT on calli and embryoids were better than those of KT and 6-BA.1.0 mg/L 2,4-D ＋1.0 mg/L ZT ＋0.5 mg/L KT ＋0.5 mg/L 6-BA was the best regulator combination for induction culture of Jiayu anther.[Conclusion]The experiment provided research basis for anther culture of pepper.展开更多
The flocculating activity of a novel bioflocculant MMF1 produced by multiple-microorganism consortia MM1 was investigated. MM1 was composed of strain BAFRT4 identified as Staphylococcus sp. and strain CYGS1 identified...The flocculating activity of a novel bioflocculant MMF1 produced by multiple-microorganism consortia MM1 was investigated. MM1 was composed of strain BAFRT4 identified as Staphylococcus sp. and strain CYGS1 identified as Pseudomonas sp. The flocculating activity of MMF1 isolated from the screening medium was 82.9%, which is remarkably higher than that of the bioflocculant produced by either of the strains under the same condition. Brewery wastewater was also used as the carbon source for MM1, and the cost-effective production medium for MM1 mainly comprised 1.0 L brewery water （chemical oxygen demand （COD） 5000 mg/L）, 0.5 g/L urea, 0.5 g/L yeast extract, and 0.2 g/L （NH4）2SO4. The optimal conditions for the production of MMF1 was inoculum size 2%, initial pH 6.0, cultivating temperature 30℃, and shaking speed 160 r/min, under which the flocculating activity of the MMF1 reached 96.8%. Fifteen grams of purified bioflocculant could be recovered from 1.0 L of fermentation broth. MMF1 was identified as a macromolecular substance containing both protein and polysaccharide. It showed good flocculating performance in treating indigotin printing and dyeing wastewater, and the maximal removal efficiencies of COD and chroma were 79.2% and 86.5%, respectively.展开更多
The ability of constructed wetlands with different plants in nitrate removal were investigated. The factors promoting the rates of denitrification including organic carbon, nitrate load, plants in wetlands, pH and wat...The ability of constructed wetlands with different plants in nitrate removal were investigated. The factors promoting the rates of denitrification including organic carbon, nitrate load, plants in wetlands, pH and water temperature in field were systematically investigated. The results showed that the additional carbon source （glucose） can remarkably improve the nitrate removal ability of the constructed wetland. It demonstrated that the nitrate removal rate can increase from 20% to more than 50% in summer and from 10% to 30% in winter, when the nitrate concentration was 30-40 rag/L, the retention time was 24 h and 25 mg/L dissolved organic carbon （DOC） was ploughed into the constructed wetland. However, the nitrite in the constructed wetland accumulated a little with the supply of the additional carbon source in summer and winter, and it increased from 0.15 to 2 mg/L in the effluent. It was also found that the abilities of plant in adjusting pH and temperature can result in an increase of denitrification in wetlands. The seasonal change may also impact the denitrification.展开更多
Activated sludge process has been widely used to remove phosphorus and nitrogen from wastewater. However,the nitrogen and phosphorus removal is sometimes unsatisfactory due to the low influent COD.Another problem with...Activated sludge process has been widely used to remove phosphorus and nitrogen from wastewater. However,the nitrogen and phosphorus removal is sometimes unsatisfactory due to the low influent COD.Another problem with the activated sludge process is that large amount of waste activated sludge is produced,which needs further treatment.In this study,the waste activated sludge alkaline fermentation liquid was used as the main carbon source for phosphorus and nitrogen removal under anaerobic followed by alternating aerobic-anoxic conditions,and the results were compared with those using acetic acid as the carbon source.The use of alkaline fermentation liquid not only affected the transformations of phosphorus,nitrogen,intracellular polyhydroxyalkanoates and glycogen, but also led to higher removal efficiencies for phosphorus and nitrogen compared with acetic acid.It was observed that ammonium was completely removed with either alkaline fermentation liquid or acetic acid as the carbon source. However,the former resulted in higher removal efficiencies for phosphorus(95%)and nitrogen(82%),while the latter showed lower ones(87%and 74%,respectively).The presence of a large amount of propionic acid in the alkaline fermentation liquid was one possible reason for its higher phosphorus removal efficiency.Exogenous instead of endogenous denitrification was the main pathway for nitrogen removal with the alkaline fermentation liquid as the carbon source,which was responsible for its higher nitrogen removal efficiency.It seems that the alkaline fermentation liquid can replace acetic acid as the carbon source for phosphorus and nitrogen removal in anaerobic fol- lowed by alternating aerobic-anoxic sequencing batch reactor.展开更多
Heterotrophic culture of microalgae to develop methods of increasing biomass productivity and storage lipids has brought new insight to commercial biodiesel production. To understand the relationship between heterotro...Heterotrophic culture of microalgae to develop methods of increasing biomass productivity and storage lipids has brought new insight to commercial biodiesel production. To understand the relationship between heterotrophy and lipid production, the effects of carbon sources on the growth and lipid accumulation of Chlorella sorokiniana GXNN01 was studied. The alga exhibited an increased growth rate in response to the addition of carbon sources, which reached the stationary phase after 48 h at 30℃. In addition, glucose and NaAc had a significant effect on the lipid accumulation during the early-stationary phase. Specifically, the lipid content was 0.237±0.026 g ·g^-1 cell dry weight and 0.272±0.041 g Ll when glucose was used as the carbon source, whereas the lipid content reached 0.287±0.018 g ·g^-1 cell dry weight and 0.2884-0.008 g Lz when NaAc was used as the carbon source. The neutral lipid content was found to first decrease and then increase over time during the growth phase. A glucose concentration of 20 mmol L^-1 gave the maximal lipid yield and the optimum harvest time was the early-stationary phase.展开更多
Effect of added carbon source and nitrate concentration on the denitrifying phosphorus removal by DPB sludge was systematically studied using batch experiments, at the same time the variation of ORP was investigated. ...Effect of added carbon source and nitrate concentration on the denitrifying phosphorus removal by DPB sludge was systematically studied using batch experiments, at the same time the variation of ORP was investigated. Results showed that the denitrifying and phosphorus uptake rate in anoxic phase increased with the high initial anaerobic carbon source addition. However once the initial COD concentration reached a certain level, which was in excess to the PHB saturation of poly-P bacteria, residual COD carried over to anoxic phase inhibited the subsequent denitrifying phosphorus uptake. Simultaneously, phosphate uptake continued until all nitrate was removed, following a slow endogenous release of phosphate. High nitrate concentration in anoxic phase increased the initial denitrifying phosphorus rate. Once the nitrate was exhausted, phosphate uptake changed to release. Moreover, the time of this turning point occurred later with the higher nitrate addition. On the other hand, through on-line monitoring the variation of the ORP with different initial COD concentration, it was found ORP could be used as a control parameter for phosphorus release, but it is impossible to utilize ORP for controlling the denitrificaion and anoxic phosphorus uptake operations.展开更多
To investigate the microbial communities of microorganisms cultivated under different carbon sources, three sequencing batch reactors were operated. They were supplied with sewage, glucose and sodium acetate as carbon...To investigate the microbial communities of microorganisms cultivated under different carbon sources, three sequencing batch reactors were operated. They were supplied with sewage, glucose and sodium acetate as carbon sources respectively and showed high phosphorus removal performance. The results of denaturing gradient gel electrophoresis(DGGE) of polymerase chain reaction-amplified(PCR) 16S rDNA fragments demonstrated that β-protebacteria, Actinomyces sp. and γ-protebacteria only exited in 1# reactor. The microbiological diversity of 1# reactor exceeded the other two reactors. Flavobacterium, Bacillales, Actinomyces, Actinobacteridae and uncultured bacteria(AF527584, AF502204, AY592749, AB076862, AJ619051, AF495454 and AY133070) could be detected in the biological phosphorus removal reactors.展开更多
A pilot-scale modified carbon source division anaerobic anoxic oxic(AAO) process with pre-concentration of returned activated sludge(RAS) was proposed in this study for the enhanced biological nutrient removal(BNR) of...A pilot-scale modified carbon source division anaerobic anoxic oxic(AAO) process with pre-concentration of returned activated sludge(RAS) was proposed in this study for the enhanced biological nutrient removal(BNR) of municipal wastewater with limited carbon source. The influent carbon source was fed in step while a novel RAS pre-concentration tank was adopted to improve BNR efficiency, and the effects of an influent carbon source distribution ratio and a RAS pre-concentration ratio were investigated. The results show that the removal efficiency of TN is mainly influenced by the carbon source distribution ratio while the TP removal relies on the RAS pre-concentration ratio. The optimum carbon source distribution ratio and RAS pre-concentration ratio are 60% and 50%, respectively, with an inner recycling ratio of 100% under the optimum steady operation of pilot test, reaching an average effluent TN concentration of 9.8 mg·L-1with a removal efficiency of 63% and an average TP removal efficiency of 94%. The mechanism of nutrient removal is discussed and the kinetics is analyzed. The results reveal that the optimal carbon source distribution ratio provides sufficient denitrifying carbon source to each anoxic phase, reducing nitrate accumulation while the RAS pre-concentration ratio improves the condition of anaerobic zone to ensure the phosphorus release due to less nitrate in the returned sludge. Therefore, nitrifying bacteria, denitrifying bacteria and phosphorus accumulation organisms play an important role under the optimum condition, enhancing the performance of nutrient removal in this test.展开更多
Pure WC-6%Co nanosized composite powders were synthesized via a low-temperature method.The effects of carbon source on microstructure characteristic of composite powders were investigated,and the effects of heat-treat...Pure WC-6%Co nanosized composite powders were synthesized via a low-temperature method.The effects of carbon source on microstructure characteristic of composite powders were investigated,and the effects of heat-treatment parameter on carbon content of composite powders were also discussed.The results of SEM and XRD revealed that the carbon decomposing from glucose was more active than carbon black.Therefore,WC-Co nanosized composite powders could be synthesized at 900°C for 1 h under a hydrogen atmosphere.The individual WC grains were bonded together into a long strip under the action of cobalt.The results of carbon analysis revealed that the total carbon content decreased with the increase of the temperature in the range of 800-1000°C.Moreover,the total carbon content and the compounded carbon increased with the increase of the flow rate of H2 in the range of 1.1-1.9 m3/h.展开更多
Biofilms are a constant concern in the food industry;understanding the effect of environmental conditions on biofilm formation is essential to develop effective control strategies.Therefore,this study was conducted to...Biofilms are a constant concern in the food industry;understanding the effect of environmental conditions on biofilm formation is essential to develop effective control strategies.Therefore,this study was conducted to investigate biofilms formation by Staphylococcus epidermidis under various conditions.Biofilms were cultured in nutrient broth containing different carbon source concentrations(0–10 mg/mL)on polystyrene surfaces for 32 h of incubation at 37℃or 55℃,with quantification and enumeration at 8,16,24 and 32 h.S.epidermidis developed biofilms under all tested conditions;achieved the highest yield of biofilm biomass at 2.5 mg/mL for all carbon sources at 37℃.The highest efficiency of extracellular polymeric substance(EPS)molecule production occurred under glucose availability in the growth environment,with a higher yield of biomass and a significantly smaller number of metabolically active cells than under other tested conditions.A condensed ball-shaped structure was observed under the lactose condition.Meanwhile,biofilms in the presence of maltose showed mainly opaque thick rich colonies,while a compact multilayered-shaped structure was exhibited under both glucose and sucrose conditions.These results contribute to a better understanding of the biofilm formation by S.epidermidis in order to reduce contamination and recontamination in the food industry.展开更多
Nano/microcrystalline composite diamond films were deposited on the holes of WC-6%Co drawing dies by a two-step procedure using alternative carbon sources, i.e., methane for the microcrystalline diamond（MCD） layer a...Nano/microcrystalline composite diamond films were deposited on the holes of WC-6%Co drawing dies by a two-step procedure using alternative carbon sources, i.e., methane for the microcrystalline diamond（MCD） layer and acetone for the nanocrystalline diamond（NCD） layer. Moreover, the monolayer methane-MCD and acetone-NCD coated drawing dies were fabricated as comparisons. The adhesion and wear rates of the diamond coated drawing dies were also tested by an inner hole polishing apparatus. Compared with mono-layer diamond coated drawing die, the composite diamond coated one exhibits better comprehensive performance, including higher adhesive strength and better wear resistance than the NCD one, and smoother surface（Ra=65.3 nm） than the MCD one（Ra=95.6 nm） after polishing at the same time. Compared with the NCD coated drawing die, the working lifetime of the composite diamond coated one is increased by nearly 20 times.展开更多
The effects of different carbon sources(sugars) on the production and molecular properties of exopolysaccharides(EPS) were evaluated in the mycelial liquid culture of a medicinal fungus Cordyceps sinensis Cs-HK1. Gala...The effects of different carbon sources(sugars) on the production and molecular properties of exopolysaccharides(EPS) were evaluated in the mycelial liquid culture of a medicinal fungus Cordyceps sinensis Cs-HK1. Galactose or mannose was used(at 5 g·L^(-1)) as a secondary carbon source with glucose(35 g·L^(-1)) at the mass ratio of 1:7. Mannose was consumed notably since the first day of culture, but galactose was not even after glucose was exhausted.The volumetric yield of EPS in culture was increased slightly with the addition of galactose and decreased with mannose. The monosaccharide composition of EPS was also different, e.g., on day 8, the glucose contents of EPS were 76%with the addition of mannose, 59% with galactose, compared with 62% with glucose only. The molecular weight distribution of EPS was also affected by the secondary carbon source, being generally lower compared with that with glucose only. The results suggested that the addition of galactose improved the total yield of EPS in culture while mannose can improve the yield of glucan constituent of EPS.展开更多
Early childhood caries （ECC） is a considerable pediatric and public health problem worldwide. Preceding studies have focused primarily on bacterial diversity at the taxonomic level. Although these studies have provi...Early childhood caries （ECC） is a considerable pediatric and public health problem worldwide. Preceding studies have focused primarily on bacterial diversity at the taxonomic level. Although these studies have provided significant information regarding the connection between dental caries and oral micmbiomes, further comprehension of this microbial community＇s ecological relevance is limited. This study identified the carbon source metabolic differences in dental plaque between children with and without ECC. We compared the microbial community functional diversity in 18 caries-free subjects with 18 severe ECC patients based on sole carbon source usage using a Biolog assay. The anaerobic microbial community in the ECC patients displayed greater metabolic activity than that of the control group. Specific carbon source metabolism differed significantly between the two groups. Subjects from the two groups were well distinguished by cluster and principal component analyses based on discriminative carbon sources. Our results implied that the microbial functional diversity between the ECC patients and healthy subjects differed significantly. In addition, the Biolog assay furthered our understanding of oral microbiomes as a composite of functional abilities, thus enabling us to identify the ecologically relevant functional differences among oral microbial communities.展开更多
Direct synthesis of high-quality doped graphene on dielectric substrates without transfer is highly desired for simplified device processing in electronic applications.However,graphene synthesis directly on substrates...Direct synthesis of high-quality doped graphene on dielectric substrates without transfer is highly desired for simplified device processing in electronic applications.However,graphene synthesis directly on substrates suitable for device applications,though highly demanded,remains unattainable and challenging.Here,a simple and transfer-free synthesis of high-quality doped graphene on the dielectric substrate has been developed using a thin Cu layer as the top catalyst and polycyclic aromatic hydrocarbons as both carbon precursors and doping sources.N-doped and N,F-co-doped graphene have been achieved using TPB and F16Cu Pc as solid carbon sources,respectively.The growth conditions were systematically optimized and the as-grown doped graphene were well characterized.The growth strategy provides a controllable transfer-free route for high-quality doped graphene synthesis,which will facilitate the practical applications of graphene.展开更多
Synthetic biology promises to simplify the construction of metabolic pathways by assembling the de- tached modules of the whole pathway. This gives new approaches for the microbial production of industrial products su...Synthetic biology promises to simplify the construction of metabolic pathways by assembling the de- tached modules of the whole pathway. This gives new approaches for the microbial production of industrial products such as polyhydroxyalkanoates （PHA）. In this study, to produce poly（3-hydroxybutyrate-co-3-hydroxyhexanoate） （PHBHHx） by Pseudomonas stutzeri 1317 from unrelated carbon sources such as glucose, the phaCl-phaZ-phaC2 operon of P. stutzeri 1317 was knocked out to generate the PHA deficient mutant P. stutzeri 1317LF. Then three modules containing phaCahAReBRe, phaCahBReGep and phaCAhPah were introduced into P. stutzeri 1317LF separately The shake flask results indicated that the precursor supply and PHA synthase activity were the vital factors for the PHBHHx accumulation of P. stutzeri 1317LF. Furthermore, the PHBHHx accumulation of the recombinants from different carbon resources were performed. The highest PHBHHx content was 23.7% （by mass） with 58.6% （by mole） 3HB fraction. These results provide basis for further improving the PHBHHx accumulation of P. stutzeri from unrelated carbon sources.展开更多
The Variscan Bohemian Massif in Central Europe,resulting from continent-continent collision,was long considered a potential UHP terrain due to numerous occurrences of high-pressure granulites,eclogites and
This paper investigates the effect of using sodium citrate（NaC6H5O6·2H2O）as sole carbon source for nitrate removal from drinking water.With sodium citrate as sole carbon source, batch experiments have been cond...This paper investigates the effect of using sodium citrate（NaC6H5O6·2H2O）as sole carbon source for nitrate removal from drinking water.With sodium citrate as sole carbon source, batch experiments have been conducted to study the law of denitrification influenced by pH, C/N and temperature. Results show that a denitrification rate reaching 1.32 g NO-3-N /（g Biomass·d） was obtained when pH was at 7.5,C/N at 1.7（atom ratio）, and temperature from 20 ℃ to 30 ℃. The results also show that denitrification rate with sodium citrate as carbon source approaches to that with methanol as carbon source.展开更多
Ti（ C, N） was synthesized with the starting materials of 76. 9% titania white and 23. 1% carbon black （graphite or activated carbon ）, or 40% titania white and 60% amylum, with or without 10% NaBr - KCl, dry mould...Ti（ C, N） was synthesized with the starting materials of 76. 9% titania white and 23. 1% carbon black （graphite or activated carbon ）, or 40% titania white and 60% amylum, with or without 10% NaBr - KCl, dry moulding and carbon embedded firing at i 300 ℃ and 1 400 ℃ for 3 h, respectively. Phase composition and microstructure of the synthesized Ti （C, N） were analyzed by XRD, SEM and EPMA. Effects of different carbon sources and NaBr-KCl on the synthesis of Ti（ C, N） were investigated. The results show that： （1） Ti （C, N） can be synthesized by using carbon black, graphite, activated carbon or amylum as carbon source separately; （2） Additive NaBr - KCl is more favorable for accelerating the carbothermal reduction reaction using carbon black or amylum as carbon source; （3） In the presence of NaBr - KCl, particle size of the synthesized Ti（ C, N） is 5 -8μm using carbon black as carbon source fired at 1 300 ℃ for 3 h, while that is only 1 - 3 μm using graphite, activated carbon or amylum fired at 1 400 ℃ for 3 h.展开更多
基金Project supported by Beijing Natural Science Foundation(Grant No.2182065)the National Natural Science Foundation of China(Grant No.11922202)。
文摘Silicon-based material is an important anode material for next-generation lithium-ion batteries.In order to overcome its shortcomings,carbon coating is often employed to improve the electrochemical performance.However,the carbon source,carbon content,and different contact and mixing schemes between carbon sources and silicon are all complex factors and need to be clarified.In this study,nano-silicon is coated by the chemical vapor deposition method using different carbon sources,such as acetylene,methane,propane,and propylene.Carbon content after coating is designed to stay at the same level to reduce the experimental error.Results show the sample with higher conductivity provides higher cycle performance.Propylene is the best choice of the four carbon sources studied in this work.These results indicate that the selection of the carbon source is an important factor that plays a significant role in electrochemical performance.
基金Supported by National Modern Agricultural Technology System(CARS-46)NationalSci-tech Support Plan(2012BAD25B05,2012BAD25B01)National Department PublicBenefit Research Foundation(201203083)~~
文摘With Biolog Eco microplate, metabolic characteristics and functional diver-sity of carbon source in microflora of ponds were researched based on recitculating ponds and control ponds in order to explore effects of eco-adjustments on microflo-ra in ponds. The results indicate that total number of bacterium, microbial metabolism activity, and diversity index in P7, P8, P1 and P2 kept higher, fol owed by P3, P4, P5 and P6. The utilization rate of microbes on sugars achieved the highest （31.0%-48.7%）, fol owed by carboxylic acid （13.4%-18.0%）, amino acid （10.1%-20.5%）, polymers （9.4%-17.0%）, biopolymer （5.7%-9.7%） and phenol （4.95%-7.50%）. Principal component analysis divided microflora in different ponds, suggesting that microbial community has varied carbon source characteristics and nitrogen-containing compound and biopolymer metabolisms are most affected.
文摘[Objective]In order to increase anther culture efficiency of pepper.[Method]MS culture media and Bolajiaohong were used in this experiment to study the influences of carbon sources and concentrations on anther callus induction of pepper.Jiayu was taken as a material to study influences of plant growth regulators and concentrations on anther callus induction of pepper according to L16（4^5） orthogonal design.[Result]The average callus and embryoid induction rates of maltose at all concentrations were higher than these of sucrose but the difference was not significant.Taking maltose or sucrose as a carbon source,3% to 6% concentration was good for increasing induction frequencies of calli and embryoids.However,If the concentration was over 6%,the induction rates were declined dramatically with the increase of sugar concentration.The influences of growth regulators on induction rate of calli were listed as 2,4-D﹥ZT﹥NAA﹥KT﹥6-BA;the influences on induction rates of embryoids were listed as 2,4-D﹥NAA﹥ZT﹥KT﹥6-BA.The 2,4-D,ZT,NAA and KT had signficant or extremely significant influences on induction rates of calli and embryoids.2,4-D,ZT at 1.0 mg/L and NNA,KT at 0.5 mg/L had the best effects.The influences of ZT on calli and embryoids were better than those of KT and 6-BA.1.0 mg/L 2,4-D ＋1.0 mg/L ZT ＋0.5 mg/L KT ＋0.5 mg/L 6-BA was the best regulator combination for induction culture of Jiayu anther.[Conclusion]The experiment provided research basis for anther culture of pepper.
基金Project supported by the Specialized Research Fund for the Doctoral Program of Higher Education(No.20050247016)the Program forNew Century Excellent Talents in University(NCET-05-0387).
文摘The flocculating activity of a novel bioflocculant MMF1 produced by multiple-microorganism consortia MM1 was investigated. MM1 was composed of strain BAFRT4 identified as Staphylococcus sp. and strain CYGS1 identified as Pseudomonas sp. The flocculating activity of MMF1 isolated from the screening medium was 82.9%, which is remarkably higher than that of the bioflocculant produced by either of the strains under the same condition. Brewery wastewater was also used as the carbon source for MM1, and the cost-effective production medium for MM1 mainly comprised 1.0 L brewery water （chemical oxygen demand （COD） 5000 mg/L）, 0.5 g/L urea, 0.5 g/L yeast extract, and 0.2 g/L （NH4）2SO4. The optimal conditions for the production of MMF1 was inoculum size 2%, initial pH 6.0, cultivating temperature 30℃, and shaking speed 160 r/min, under which the flocculating activity of the MMF1 reached 96.8%. Fifteen grams of purified bioflocculant could be recovered from 1.0 L of fermentation broth. MMF1 was identified as a macromolecular substance containing both protein and polysaccharide. It showed good flocculating performance in treating indigotin printing and dyeing wastewater, and the maximal removal efficiencies of COD and chroma were 79.2% and 86.5%, respectively.
基金supported by the National Key Technologies R&D Program of China (No. 2007BAC22B02)
文摘The ability of constructed wetlands with different plants in nitrate removal were investigated. The factors promoting the rates of denitrification including organic carbon, nitrate load, plants in wetlands, pH and water temperature in field were systematically investigated. The results showed that the additional carbon source （glucose） can remarkably improve the nitrate removal ability of the constructed wetland. It demonstrated that the nitrate removal rate can increase from 20% to more than 50% in summer and from 10% to 30% in winter, when the nitrate concentration was 30-40 rag/L, the retention time was 24 h and 25 mg/L dissolved organic carbon （DOC） was ploughed into the constructed wetland. However, the nitrite in the constructed wetland accumulated a little with the supply of the additional carbon source in summer and winter, and it increased from 0.15 to 2 mg/L in the effluent. It was also found that the abilities of plant in adjusting pH and temperature can result in an increase of denitrification in wetlands. The seasonal change may also impact the denitrification.
基金Supported by the National High Technology Research and Development Program of China(2007AA06Z326)the Programfor New Century Excellent Talents(06-0373)in University
文摘Activated sludge process has been widely used to remove phosphorus and nitrogen from wastewater. However,the nitrogen and phosphorus removal is sometimes unsatisfactory due to the low influent COD.Another problem with the activated sludge process is that large amount of waste activated sludge is produced,which needs further treatment.In this study,the waste activated sludge alkaline fermentation liquid was used as the main carbon source for phosphorus and nitrogen removal under anaerobic followed by alternating aerobic-anoxic conditions,and the results were compared with those using acetic acid as the carbon source.The use of alkaline fermentation liquid not only affected the transformations of phosphorus,nitrogen,intracellular polyhydroxyalkanoates and glycogen, but also led to higher removal efficiencies for phosphorus and nitrogen compared with acetic acid.It was observed that ammonium was completely removed with either alkaline fermentation liquid or acetic acid as the carbon source. However,the former resulted in higher removal efficiencies for phosphorus(95%)and nitrogen(82%),while the latter showed lower ones(87%and 74%,respectively).The presence of a large amount of propionic acid in the alkaline fermentation liquid was one possible reason for its higher phosphorus removal efficiency.Exogenous instead of endogenous denitrification was the main pathway for nitrogen removal with the alkaline fermentation liquid as the carbon source,which was responsible for its higher nitrogen removal efficiency.It seems that the alkaline fermentation liquid can replace acetic acid as the carbon source for phosphorus and nitrogen removal in anaerobic fol- lowed by alternating aerobic-anoxic sequencing batch reactor.
基金Supported by the National High Technology Research and Development Program of China (863 Program) (No.2006AA05Z112)the Key Project of Science and Technology for Supporting Tianjin Development (No.2007LS700310)the Knowledge Innovation Project of Chinese Academy of Sciences (No.KGCX2-YW-374-3)
文摘Heterotrophic culture of microalgae to develop methods of increasing biomass productivity and storage lipids has brought new insight to commercial biodiesel production. To understand the relationship between heterotrophy and lipid production, the effects of carbon sources on the growth and lipid accumulation of Chlorella sorokiniana GXNN01 was studied. The alga exhibited an increased growth rate in response to the addition of carbon sources, which reached the stationary phase after 48 h at 30℃. In addition, glucose and NaAc had a significant effect on the lipid accumulation during the early-stationary phase. Specifically, the lipid content was 0.237±0.026 g ·g^-1 cell dry weight and 0.272±0.041 g Ll when glucose was used as the carbon source, whereas the lipid content reached 0.287±0.018 g ·g^-1 cell dry weight and 0.2884-0.008 g Lz when NaAc was used as the carbon source. The neutral lipid content was found to first decrease and then increase over time during the growth phase. A glucose concentration of 20 mmol L^-1 gave the maximal lipid yield and the optimum harvest time was the early-stationary phase.
文摘Effect of added carbon source and nitrate concentration on the denitrifying phosphorus removal by DPB sludge was systematically studied using batch experiments, at the same time the variation of ORP was investigated. Results showed that the denitrifying and phosphorus uptake rate in anoxic phase increased with the high initial anaerobic carbon source addition. However once the initial COD concentration reached a certain level, which was in excess to the PHB saturation of poly-P bacteria, residual COD carried over to anoxic phase inhibited the subsequent denitrifying phosphorus uptake. Simultaneously, phosphate uptake continued until all nitrate was removed, following a slow endogenous release of phosphate. High nitrate concentration in anoxic phase increased the initial denitrifying phosphorus rate. Once the nitrate was exhausted, phosphate uptake changed to release. Moreover, the time of this turning point occurred later with the higher nitrate addition. On the other hand, through on-line monitoring the variation of the ORP with different initial COD concentration, it was found ORP could be used as a control parameter for phosphorus release, but it is impossible to utilize ORP for controlling the denitrificaion and anoxic phosphorus uptake operations.
文摘To investigate the microbial communities of microorganisms cultivated under different carbon sources, three sequencing batch reactors were operated. They were supplied with sewage, glucose and sodium acetate as carbon sources respectively and showed high phosphorus removal performance. The results of denaturing gradient gel electrophoresis(DGGE) of polymerase chain reaction-amplified(PCR) 16S rDNA fragments demonstrated that β-protebacteria, Actinomyces sp. and γ-protebacteria only exited in 1# reactor. The microbiological diversity of 1# reactor exceeded the other two reactors. Flavobacterium, Bacillales, Actinomyces, Actinobacteridae and uncultured bacteria(AF527584, AF502204, AY592749, AB076862, AJ619051, AF495454 and AY133070) could be detected in the biological phosphorus removal reactors.
基金Supported by the Major Science and Technology Program for Water Pollution Contro and Treatment-Crucial Technology Research and Engineering Sample Subject on Municipa Wastewater Treatment Process Updated to Higher Drainage Standard(2008ZX07317-02)Wuhan Water Pollution Control and the Water Environment Administer Technology and Synthetic Sample Project in Cities and Towns(2008ZX07317)
文摘A pilot-scale modified carbon source division anaerobic anoxic oxic(AAO) process with pre-concentration of returned activated sludge(RAS) was proposed in this study for the enhanced biological nutrient removal(BNR) of municipal wastewater with limited carbon source. The influent carbon source was fed in step while a novel RAS pre-concentration tank was adopted to improve BNR efficiency, and the effects of an influent carbon source distribution ratio and a RAS pre-concentration ratio were investigated. The results show that the removal efficiency of TN is mainly influenced by the carbon source distribution ratio while the TP removal relies on the RAS pre-concentration ratio. The optimum carbon source distribution ratio and RAS pre-concentration ratio are 60% and 50%, respectively, with an inner recycling ratio of 100% under the optimum steady operation of pilot test, reaching an average effluent TN concentration of 9.8 mg·L-1with a removal efficiency of 63% and an average TP removal efficiency of 94%. The mechanism of nutrient removal is discussed and the kinetics is analyzed. The results reveal that the optimal carbon source distribution ratio provides sufficient denitrifying carbon source to each anoxic phase, reducing nitrate accumulation while the RAS pre-concentration ratio improves the condition of anaerobic zone to ensure the phosphorus release due to less nitrate in the returned sludge. Therefore, nitrifying bacteria, denitrifying bacteria and phosphorus accumulation organisms play an important role under the optimum condition, enhancing the performance of nutrient removal in this test.
基金Project(51274107)supported by the National Natural Science Foundation of ChinaProject(2015FB127)supported by the Yunnan Natural Science Foundation,ChinaProject(2016P20151130003)supported by Analysis Foundation of Kunming University of Science and Technology,China
文摘Pure WC-6%Co nanosized composite powders were synthesized via a low-temperature method.The effects of carbon source on microstructure characteristic of composite powders were investigated,and the effects of heat-treatment parameter on carbon content of composite powders were also discussed.The results of SEM and XRD revealed that the carbon decomposing from glucose was more active than carbon black.Therefore,WC-Co nanosized composite powders could be synthesized at 900°C for 1 h under a hydrogen atmosphere.The individual WC grains were bonded together into a long strip under the action of cobalt.The results of carbon analysis revealed that the total carbon content decreased with the increase of the temperature in the range of 800-1000°C.Moreover,the total carbon content and the compounded carbon increased with the increase of the flow rate of H2 in the range of 1.1-1.9 m3/h.
基金This work was financially supported by the National Key Research and Development Program of China(2016YFD0400301)the Key Research and Development Program of Zhejiang Province(2017C02015).
文摘Biofilms are a constant concern in the food industry;understanding the effect of environmental conditions on biofilm formation is essential to develop effective control strategies.Therefore,this study was conducted to investigate biofilms formation by Staphylococcus epidermidis under various conditions.Biofilms were cultured in nutrient broth containing different carbon source concentrations(0–10 mg/mL)on polystyrene surfaces for 32 h of incubation at 37℃or 55℃,with quantification and enumeration at 8,16,24 and 32 h.S.epidermidis developed biofilms under all tested conditions;achieved the highest yield of biofilm biomass at 2.5 mg/mL for all carbon sources at 37℃.The highest efficiency of extracellular polymeric substance(EPS)molecule production occurred under glucose availability in the growth environment,with a higher yield of biomass and a significantly smaller number of metabolically active cells than under other tested conditions.A condensed ball-shaped structure was observed under the lactose condition.Meanwhile,biofilms in the presence of maltose showed mainly opaque thick rich colonies,while a compact multilayered-shaped structure was exhibited under both glucose and sucrose conditions.These results contribute to a better understanding of the biofilm formation by S.epidermidis in order to reduce contamination and recontamination in the food industry.
基金Project(51275302) supported by the National Natural Science Foundation of China
文摘Nano/microcrystalline composite diamond films were deposited on the holes of WC-6%Co drawing dies by a two-step procedure using alternative carbon sources, i.e., methane for the microcrystalline diamond（MCD） layer and acetone for the nanocrystalline diamond（NCD） layer. Moreover, the monolayer methane-MCD and acetone-NCD coated drawing dies were fabricated as comparisons. The adhesion and wear rates of the diamond coated drawing dies were also tested by an inner hole polishing apparatus. Compared with mono-layer diamond coated drawing die, the composite diamond coated one exhibits better comprehensive performance, including higher adhesive strength and better wear resistance than the NCD one, and smoother surface（Ra=65.3 nm） than the MCD one（Ra=95.6 nm） after polishing at the same time. Compared with the NCD coated drawing die, the working lifetime of the composite diamond coated one is increased by nearly 20 times.
基金Supported by The Hong Kong Polytechnic University internal grants(G-UC14 and G-YBB4)
文摘The effects of different carbon sources(sugars) on the production and molecular properties of exopolysaccharides(EPS) were evaluated in the mycelial liquid culture of a medicinal fungus Cordyceps sinensis Cs-HK1. Galactose or mannose was used(at 5 g·L^(-1)) as a secondary carbon source with glucose(35 g·L^(-1)) at the mass ratio of 1:7. Mannose was consumed notably since the first day of culture, but galactose was not even after glucose was exhausted.The volumetric yield of EPS in culture was increased slightly with the addition of galactose and decreased with mannose. The monosaccharide composition of EPS was also different, e.g., on day 8, the glucose contents of EPS were 76%with the addition of mannose, 59% with galactose, compared with 62% with glucose only. The molecular weight distribution of EPS was also affected by the secondary carbon source, being generally lower compared with that with glucose only. The results suggested that the addition of galactose improved the total yield of EPS in culture while mannose can improve the yield of glucan constituent of EPS.
基金The National Natural Science Foundation of China(81200762 and 81470769)supported this work
文摘Early childhood caries （ECC） is a considerable pediatric and public health problem worldwide. Preceding studies have focused primarily on bacterial diversity at the taxonomic level. Although these studies have provided significant information regarding the connection between dental caries and oral micmbiomes, further comprehension of this microbial community＇s ecological relevance is limited. This study identified the carbon source metabolic differences in dental plaque between children with and without ECC. We compared the microbial community functional diversity in 18 caries-free subjects with 18 severe ECC patients based on sole carbon source usage using a Biolog assay. The anaerobic microbial community in the ECC patients displayed greater metabolic activity than that of the control group. Specific carbon source metabolism differed significantly between the two groups. Subjects from the two groups were well distinguished by cluster and principal component analyses based on discriminative carbon sources. Our results implied that the microbial functional diversity between the ECC patients and healthy subjects differed significantly. In addition, the Biolog assay furthered our understanding of oral microbiomes as a composite of functional abilities, thus enabling us to identify the ecologically relevant functional differences among oral microbial communities.
基金supported by Natural Science Foundation of China(NSFC)(Grant No.91333112U1432249)+1 种基金the Priority Academic Program Development of Jiangsu Higher Education Institutionssupported by Collaborative Innovation Center of Suzhou Nano Science&Technology and sponsored by Qing Lan Project
文摘Direct synthesis of high-quality doped graphene on dielectric substrates without transfer is highly desired for simplified device processing in electronic applications.However,graphene synthesis directly on substrates suitable for device applications,though highly demanded,remains unattainable and challenging.Here,a simple and transfer-free synthesis of high-quality doped graphene on the dielectric substrate has been developed using a thin Cu layer as the top catalyst and polycyclic aromatic hydrocarbons as both carbon precursors and doping sources.N-doped and N,F-co-doped graphene have been achieved using TPB and F16Cu Pc as solid carbon sources,respectively.The growth conditions were systematically optimized and the as-grown doped graphene were well characterized.The growth strategy provides a controllable transfer-free route for high-quality doped graphene synthesis,which will facilitate the practical applications of graphene.
基金Supported by the National lqatural Science Foundation of China （31260015）, Natural Science Foundation of Qinghai Province （2012-Z-919Q）, the Extramural Project from State Key Laboratory for Agrobiotechnology （2012SKLAB06-5） and the Research Funds for Young Project of Qinghal University （2011-QYY-1）.
文摘Synthetic biology promises to simplify the construction of metabolic pathways by assembling the de- tached modules of the whole pathway. This gives new approaches for the microbial production of industrial products such as polyhydroxyalkanoates （PHA）. In this study, to produce poly（3-hydroxybutyrate-co-3-hydroxyhexanoate） （PHBHHx） by Pseudomonas stutzeri 1317 from unrelated carbon sources such as glucose, the phaCl-phaZ-phaC2 operon of P. stutzeri 1317 was knocked out to generate the PHA deficient mutant P. stutzeri 1317LF. Then three modules containing phaCahAReBRe, phaCahBReGep and phaCAhPah were introduced into P. stutzeri 1317LF separately The shake flask results indicated that the precursor supply and PHA synthase activity were the vital factors for the PHBHHx accumulation of P. stutzeri 1317LF. Furthermore, the PHBHHx accumulation of the recombinants from different carbon resources were performed. The highest PHBHHx content was 23.7% （by mass） with 58.6% （by mole） 3HB fraction. These results provide basis for further improving the PHBHHx accumulation of P. stutzeri from unrelated carbon sources.
文摘The Variscan Bohemian Massif in Central Europe,resulting from continent-continent collision,was long considered a potential UHP terrain due to numerous occurrences of high-pressure granulites,eclogites and
文摘This paper investigates the effect of using sodium citrate（NaC6H5O6·2H2O）as sole carbon source for nitrate removal from drinking water.With sodium citrate as sole carbon source, batch experiments have been conducted to study the law of denitrification influenced by pH, C/N and temperature. Results show that a denitrification rate reaching 1.32 g NO-3-N /（g Biomass·d） was obtained when pH was at 7.5,C/N at 1.7（atom ratio）, and temperature from 20 ℃ to 30 ℃. The results also show that denitrification rate with sodium citrate as carbon source approaches to that with methanol as carbon source.
基金the Natural Science Foundation of Hubei Province （2007ABA372） and the New Century Excellent Talents in University （NCET- 06-0676）.
文摘Ti（ C, N） was synthesized with the starting materials of 76. 9% titania white and 23. 1% carbon black （graphite or activated carbon ）, or 40% titania white and 60% amylum, with or without 10% NaBr - KCl, dry moulding and carbon embedded firing at i 300 ℃ and 1 400 ℃ for 3 h, respectively. Phase composition and microstructure of the synthesized Ti （C, N） were analyzed by XRD, SEM and EPMA. Effects of different carbon sources and NaBr-KCl on the synthesis of Ti（ C, N） were investigated. The results show that： （1） Ti （C, N） can be synthesized by using carbon black, graphite, activated carbon or amylum as carbon source separately; （2） Additive NaBr - KCl is more favorable for accelerating the carbothermal reduction reaction using carbon black or amylum as carbon source; （3） In the presence of NaBr - KCl, particle size of the synthesized Ti（ C, N） is 5 -8μm using carbon black as carbon source fired at 1 300 ℃ for 3 h, while that is only 1 - 3 μm using graphite, activated carbon or amylum fired at 1 400 ℃ for 3 h.
