Survey and novel research data are used in the present study to classify/identify the lithological type of Verey age reservoirs’rocks.It is shown how the use of X-ray tomography can clarify the degree of heterogeneit...Survey and novel research data are used in the present study to classify/identify the lithological type of Verey age reservoirs’rocks.It is shown how the use of X-ray tomography can clarify the degree of heterogeneity,porosity and permeability of these rocks.These data are then used to elaborate a model of hydraulic fracturing.The resulting software can take into account the properties of proppant and breakdown fluid,thermal reservoir conditions,oil properties,well design data and even the filtration and elastic-mechanical properties of the rocks.Calculations of hydraulic fracturing crack formation are carried out and the results are compared with the data on hydraulic fracturing crack at standard conditions.Significant differences in crack formation in standard and lithotype models are determined.It is shown that the average width of the crack development for the lithotype model is 2.3 times higher than that for the standard model.Moreover,the coverage of crack development in height for the lithotype model is almost 2 times less than that for the standard model.The estimated fracture half-length for the lithotype model is 13.3%less than that of for the standard model.A higher dimensionless fracture conductivity is also obtained for the lithotype model.It is concluded that the proposed approach can increase the reliability of hydraulic fracturing crack models.展开更多
In order to avoid the formation ofηphase(W_(6)Co_(6)C or W_(3)Co_(3)C)that adversely affects the sintering process and its products in the preparation process of ultra-fine WC-Co powder,a technical route of prereduct...In order to avoid the formation ofηphase(W_(6)Co_(6)C or W_(3)Co_(3)C)that adversely affects the sintering process and its products in the preparation process of ultra-fine WC-Co powder,a technical route of prereduction of WO_(3)-Co_(3)O_(4)to WO_(2)-Co and then deep reduction carbonization to WC-Co powder has been proposed.This study mainly investigates the influence of gas partial pressure on the pre-reduction process of WO_(3)-Co_(3)O_(4)under a mixed atmosphere of H_(2)-C_(2)H_(4)-Ar at 600℃and establishes the kinetic equations of pre-reduction and carbon evolution.The results indicate that increasing the partial pressure of hydrogen is conducive to the rapid and complete conversion of WO_(3) to WO_(2).High carbon content can be generated by the deposition of C_(2)H_(4),and it hinders the diffusion of the reducing gas;WO_(3)still cannot be completely reduced to WO_(2)as the partial pressure of C_(2)H_(4) increases to 60%.For the carbon evolution of C_(2)H_(4),the carbon amount is positively related to the H_(2)partial pressure,but it shows the highest amount and evolution rate when the ethylene partial pressure is 20%.Based on the reduction rate curves of WO_(3) and carbon evolution rate curves of C_(2)H_(4),the rate equations of pre-reduction and carbon evolution of WO_(3)-Co_(3)O_(4)system at 600℃are established.The pre-reduction reaction belongs to the first-order reaction,and its equation is expressed as follows:r=-(dw_(WO_(3)))/dt=(9±0.15)×10^(-2)×P_(H_(2))^(0.44)P_(C_(2)H_(4))&(0.57)The carbon deposition rate equation of C_(2)H_(4) can be expressed as follows:r=-(dc_C)/dt=r_f-r_b≌7.35×10^(-2)×P_(C_(2)H_(4))^(0.31)展开更多
Newly-acquired seismic data reveal widespread carbonate deposits covering a large part of the northwestern South China Sea margin.Three carbonate platforms are identified to have developed on the topographic highs inh...Newly-acquired seismic data reveal widespread carbonate deposits covering a large part of the northwestern South China Sea margin.Three carbonate platforms are identified to have developed on the topographic highs inherited from tectonic deformation and volcanic accretion.Across the carbonate platforms,the Miocene strata are characterized by high-amplitude seismic reflections and distinct platform architecture that overlaps older strata.The Guangle and Xisha carbonate platforms grew on faulted blocks due to South China Sea continental rifting,while the Zhongjian carbonate platform developed on a structural high induced by early Miocene volcanism.During the late Miocene,partial drowning resulted in the inhibition of platform growth,eventual platform drowning and termination of most carbonate deposition.The drowning of the Guangle and Zhongjian carbonate platforms is shown by the supply of siliciclastic sediments during the late Miocene and seems to be closely linked to late Neogene volcanic activity,whilst the drowning of the Xisha carbonate platform is primarily related to relative eustatic changes.Our results imply that tectonic activity,volcanism and eustasy are the dominant controls on the evolution of carbonate platforms on the northwestern margin of the South China Sea.展开更多
Objective The Yubei area is located in the mid-east Maigaiti slope of southwestern Tarim Basin,China,with an exploration history of several years.Recent exploration has preliminarily indicated that the Ordovician carb...Objective The Yubei area is located in the mid-east Maigaiti slope of southwestern Tarim Basin,China,with an exploration history of several years.Recent exploration has preliminarily indicated that the Ordovician carbonate formations in this area have some oil and gas potential.Carbonate microfacies provides material basis for reservoir development,seal formation and展开更多
In the present study,two Ni/YSZ anodes with different volume ratios of Ni and YSZ,30:70 and 45:55 vol%,are operated in dry methane under open circuit and polarized conditions.Three-dimensional(3D)Ni/YSZ microstructure...In the present study,two Ni/YSZ anodes with different volume ratios of Ni and YSZ,30:70 and 45:55 vol%,are operated in dry methane under open circuit and polarized conditions.Three-dimensional(3D)Ni/YSZ microstructures after carbon deposition are reconstructed by the focused ion beam-scanning electron microscopy(FIB-SEM)with the help of machine learning segmentation.From the reconstructed mircostructures,volume fraction,connectivity,three phase boundary(TPB)density,and tortuosity are quantified.In addition,local carbon microstructures are quantitatively reconstructed,and the effect of polarization on carbon morphology is investigated.It is demonstrated that Ni surface in the vicinity of active TPB near the electrolyte is free from carbon formation,while remaining Ni surface at some distances from TPB exhibits severe carbon deposition.In average,total amount of carbon deposition is larger near the electrolyte.These observations imply complex interplay between the electrochemical steam generation and methane cracking on Ni surface which take place very locally near the active TPB.展开更多
In situ catalytic conversion of biomass fast pyrolysis vapors was carried out on HZSM-5 with varying Si/Al ratios(ranging from 20 to 300) at 450 °C. The effects of Si/Al ratios of HZSM-5 zeolites on the distribut...In situ catalytic conversion of biomass fast pyrolysis vapors was carried out on HZSM-5 with varying Si/Al ratios(ranging from 20 to 300) at 450 °C. The effects of Si/Al ratios of HZSM-5 zeolites on the distribution of biomass fast pyrolysis products and carbon deposits on catalysts were investigated. It was quite remarkable that after in situ catalytic conversion the amount of light phenols and hydrocarbons increased significantly while that of heavy phenols decreased a lot. Besides, the yield of cyclopentenones with relatively low oxygen content generally increased. It also indicated that as the Si/Al ratios of HZSM-5 increased, the amount of hydrocarbons and light phenols was found to drop greatly. The amount of carbon deposits was found to be around 8.5% with the exception of HZSM-5 with the Si/Al ratio of 300,which is much lower. Moreover, the carbon deposits yield dropped gradually with increasing Si/Al ratios of HZSM-5.Calcination of spent catalysts at 600 °C helped to restore the catalytic activity to a large extent despite a relatively lower efficiency of deoxygenation. Results indicated that HZSM-5 with relatively high acidity displayed great catalytic performance.展开更多
To improve the‘detonation-supporting’performance of fuel-rich catalytic combustion products,DBD plasma,stimulated by adjustable nanosecond pulse power supply,was used to further regulate the components and concentra...To improve the‘detonation-supporting’performance of fuel-rich catalytic combustion products,DBD plasma,stimulated by adjustable nanosecond pulse power supply,was used to further regulate the components and concentrations of the hydrocarbon blends.In this paper,the parameters including load voltage,frequency,rising(falling)edge,pulse width and feeding flow rate were changed respectively,and the corresponding concentration and proportion change of the components in blend gas were investigated.According to the experiment result,it was found that when the discharge frequency is low,the plasma mainly promotes the transformation of light gaseous substances,while it mainly promotes the conversion to heavy hydrocarbons when the frequency is larger.Increasing load voltage will strengthen this trend.The controlling and reforming effect of plasma on the blend gas will decrease with the increase of voltage rising(falling)edge and the feeding flow rate.The regulation effect will be strengthened with the increase of pulse width under 200 ns.With the increase of discharge intensity,the‘carbon’settles on the walls of the reactor,which will change the dielectric constant,leading to the loss of control of the discharge.展开更多
High temperature solid oxide fuel cell(SOFC)is the most efficient and clean energy conversion technology to electrochemically convert the chemical energy of fuels such as hydrogen,natural gas and hydrocarbons to elect...High temperature solid oxide fuel cell(SOFC)is the most efficient and clean energy conversion technology to electrochemically convert the chemical energy of fuels such as hydrogen,natural gas and hydrocarbons to electricity,and also the most viable alternative to the traditional thermal power plants.However,the power output of a SOFC critically depends on the characteristics and performance of its key components:anode,electrolyte and cathode.Due to the highly reducing environment and strict requirements in electrical conductivity and catalytic activity,there are limited choices in the anode materials of SOFCs,particularly for operation in the intermediate temperature range of 500–800C.Among them,Ni-based cermets are the most common and popular anode materials of SOFCs.The objective of this paper is to review the development of Ni-based anode materials in SOFC from the viewpoints of materials microstructure,performance and industrial scalability associated with the fabrication and optimization processes.The latest advancement in nano-structure architecture,contaminant tolerance and interface optimization of Ni-based cermet anodes is presented.And at the end of this paper,we propose and appeal for the collaborative work of scientists from different disciplines that enable the inter-fusion research of fabrication,microanalysis and modelling,aiming at the challenges in the development of Ni-based cermet anodes for commercially viable intermediate temperature SOFC or IT-SOFC technologies.展开更多
To gain deep insight into the Morphological effect of Ni_xMg_(1-x)O catalysts on the reaction of CO_2 reforming with methane, we designed and fabricated three different spatial structural Ni_xMg_(1-x)O catalysts.These...To gain deep insight into the Morphological effect of Ni_xMg_(1-x)O catalysts on the reaction of CO_2 reforming with methane, we designed and fabricated three different spatial structural Ni_xMg_(1-x)O catalysts.These Ni_xMg_(1-x)O catalysts with specific models such as rod, sheet and sphere, exhibited various activity and stability in CO_2 reforming reaction. Herein Ni_xMg_(1-x)O nanorods displayed higher catalytic activity, in which methane conversion was up to 72% and CO_2 conversion was 64% at 670°C with a space velocity of 79,200 mL/(gcath), compared with nanosheet and nanosphere counterparts. Furthermore, both catalysts of Ni_xMg_(1-x)O nanorod and nanosheet showed a high resistance toward coke deposition and sintering of active sites in the process of CO_2 reforming of methane.展开更多
The effect of temperature and hydrogen addition on undesired carbonaceous deposit formation during methane coupling was studied in DBD-plasma catalytic-wall reactors with Pd/Al2 O3, using electrical power to drive the...The effect of temperature and hydrogen addition on undesired carbonaceous deposit formation during methane coupling was studied in DBD-plasma catalytic-wall reactors with Pd/Al2 O3, using electrical power to drive the reaction.Experiments with thin catalyst layers allowed comparison of the performance of empty reactors and catalytic wall reactors without significantly influencing the plasma properties.The product distribution varies strongly in the temperature window between 25 and 200℃Minimal formation of deposits is found at an optimal temperature around 75℃ in the catalytic-wall reactors.The selectivity to deposits was c.a.10% with only 9 mg of catalyst loading instead of 45% in the blank reactor,while decreasing methane conversion only mildly.Co-feeding H2 to an empty reactor causes a similar decrease in selectivity to deposits,but in this case methane conversion also decreased significantly.Suppression of deposits formation in the catalytic-wall reactor at 75℃ is due to catalytic hydrogenation of mainly acetylene to ethylene.In the empty reactor,H2 co-feed decreases conversion but does not change the product distribution.The catalytic-wall reactors can be regenerated with H2-plasma at room temperature,which produces more added-value hydrocarbons.展开更多
Thermochemical two-step CO_(2) splitting is a potential approach that fixes the sustainable resource into transportable liquid fuels.However,the harsh CO_(2) splitting conditions,the limited oxygen release kinetics an...Thermochemical two-step CO_(2) splitting is a potential approach that fixes the sustainable resource into transportable liquid fuels.However,the harsh CO_(2) splitting conditions,the limited oxygen release kinetics and capacity of metal oxides block further promoted the CO yield and solar-to-fuel energy efficiency.Here,we propose a different carbon cycle assisted by Ni/La_(2)O_(3) via coupling methane decomposition with thermochemical CO_(2) splitting,replacing conventional metal oxides cycle.Superior performance was demonstrated with methane conversion reached around 94%with almost pure H_(2) generation.Encouragingly,CO_(2) conversion of 98%and CO yield of 6.9 mmol g^(-1) derived from CO_(2) were achieved,with peak CO evolution rate(402 mL min^(-1) g^(-1))of orders of magnitude higher than that in metal oxide process and outstanding thermodynamic solar-to-fuel energy efficiency(55.5%vs.18.5%).This was relevant to the synergistic activation of La_(2)O_(3) and Ni for CO_(2) in carbon cycle,thus improving CO_(2) splitting reaction with carbon species.展开更多
a-C:F films are deposited by microwave electron cyclotron resonance (ECR)plasma chemical vapor deposition (CVD) using trifluoromethane (CHF3) and benzene (C6H6) as source gases at different microwave powers. The radic...a-C:F films are deposited by microwave electron cyclotron resonance (ECR)plasma chemical vapor deposition (CVD) using trifluoromethane (CHF3) and benzene (C6H6) as source gases at different microwave powers. The radicals in plasma originating from source gases dissociation are analyzed by relative irradiance measurement. The bonding configurations and binding state of a-C:F films are measured with Fourier-transformed infrared spectrometer (FTIR) and x-ray photoelectron spectroscopy (XPS). The results show that a-C:F films are mainly composed of CF radical at lower powers but of CF2 radical at higher powers. The deposition of films is related to the radicals generated in plasma and the main bonding configurations are dependent on the ratio of CF to CF2 radicals in films.展开更多
Initial process is influenced by substrate microstructure according to the study of initial stage of electroless plating on low carbon steel and pure iron. For low carbon steels, depositing on cementite is prior to th...Initial process is influenced by substrate microstructure according to the study of initial stage of electroless plating on low carbon steel and pure iron. For low carbon steels, depositing on cementite is prior to that on ferrite, and for pure iron, the grain boundaries and some favourable grains are deposited more easily. The initial reactions of electroless depositing of Ni-P alloy have been tentatively展开更多
Iran is host to more than 285 zinc and lead carbonated host deposits including world-class deposits such as Mehdi Abad and Irankouh. Emarat deposit is located in Sanandaj-Sirjan zone and Malayer-Isfahan metallogenic p...Iran is host to more than 285 zinc and lead carbonated host deposits including world-class deposits such as Mehdi Abad and Irankouh. Emarat deposit is located in Sanandaj-Sirjan zone and Malayer-Isfahan metallogenic province (northwestern part of Sanandaj-Sirjan tectonic zone). In the area, the mineralization has stratabound shape and restricted to Early Cretaceous limestones and dolomites. With investigation of the optical properties in microscopic survey and evaluation results of analysis, sphalerite, galena, pyrite and chalcopyrite were recognized as the main minerals, covellite, tennantite-tetrahydrite and serosities, quartz and barite as the secondary minerals and gyps, smithsonite were recognized as the minorminerals in the samples. Silicification alteration acted as major process in studied deposit and dolomitization, pyritization and hematitization also were observed in the deposit. Evidences show that mineralization has occurred in post diagenetic stage (epigenetic type) and after tectonic influence.展开更多
A-C:F, H film have been studied because of their low dielectric constant for application in interlayer dielectric in ULSC. These films were deposited by ECR plasma Reactor with CHF3 and C6H6 mixture as source gas. The...A-C:F, H film have been studied because of their low dielectric constant for application in interlayer dielectric in ULSC. These films were deposited by ECR plasma Reactor with CHF3 and C6H6 mixture as source gas. The effects of microwave power, pressure and CHF3/C6H6 ratios on the film deposition rates have been investigated. The fluorocarbon and hydrocarbon radical species in the plasma discharges were analyzed by using the optical emission spectra. It demonstrates that CF2, CF and CH radicals play the important roles in the films being formed.展开更多
Hiatuses are ubiquitous in stratigraphic records at various temporal scales,but they cannot be easily identified and quantified owing to the lack of adequate methods in determining the duration of hiatuses or stratal ...Hiatuses are ubiquitous in stratigraphic records at various temporal scales,but they cannot be easily identified and quantified owing to the lack of adequate methods in determining the duration of hiatuses or stratal completeness.Here a processbased stratigraphic forward modeling(SFM)approach was used to effectively estimate the completeness of carbonate strata in three dimensions and at basin-scale.By using information derived from both spatial and temporal domains in the SFM outputs for five grid locations(pseudo wells)under different depositional settings,we were able to delineate basin-wide hiatuses of various temporal scales and determine their durations and stratal completeness quantitatively.The stratal completeness appears to be controlled by sea level changes,depositional environments,carbonate growth rates and tectonic subsidence patterns in various ways.展开更多
Ni/CeO_(2) catalysts(nCeO_(2):n_(Ni)=0,1,4,7,10)supported on SiC porous ce ramics for ethanol steam reforming(ESR)were investigated with respect to hydrogen production performance and growth of carbon deposition.The o...Ni/CeO_(2) catalysts(nCeO_(2):n_(Ni)=0,1,4,7,10)supported on SiC porous ce ramics for ethanol steam reforming(ESR)were investigated with respect to hydrogen production performance and growth of carbon deposition.The oxygen released from CeO_(2) enables the oxidation of CH_(x) species to serve as carbon precursors,thus providing Ni/CeO_(2) catalysts with stronger resistance to carbon deposition compared with Ni catalysts.The Ni/CeO_(2) catalysts prepared by inverse microemulsion and impregnation methods exhibit regular semicircular spherical shape on SiC porous ceramics.Under 500℃for 25 h of ESR reaction,the ethanol conversion rate over Ni/CeO_(2) catalysts(n_(CeO_(2)):n_(Ni)=7)is sustained up to 100%and H_(2) selectivity is essentially kept at 74%.The by-product selectivity declines stepwise with increasing content of CeO_(2),which is attributed to the adsorption and oxidation of CO and of CH_(x) species as CH_4 precursor from CeO_(2).The scanning electron microscopy(SEM)and transform electron microscopy(TEM)results reveal that further loading of CeO_(2) on the surface of Ni catalysts can alleviate both migration and sintering of Ni particles.Furthermore,carbon deposition on Ni/CeO_(2) catalysts preferentially outgrow filamentous rather than amorphous carbon,with a tendency for the latter to be more deactivated.展开更多
Ocean acidification(OA)is a persistent challenge for humans and is predicted to have deleterious effects on marine organisms,especially marine calcifiers such as coral and foraminifera.Benthic foraminifera is an impor...Ocean acidification(OA)is a persistent challenge for humans and is predicted to have deleterious effects on marine organisms,especially marine calcifiers such as coral and foraminifera.Benthic foraminifera is an important component of sediment in the continental shelf,while little is known about the impact of ocean acidification on benthic foraminifera both at the community and individual level and associated calcium carbonate deposition.We conducted eight months continued culture experiment under the scenario of 400,800,1200 and 1600 ppm pCO_(2)gradients on living benthic foraminifera from four stations in the continental shelf of the West Pacific Ocean.Statistic results showed OA had a negative effect on the abundance of benthic foraminifera.In contrast,the diversity increased roughly under OA conditions implying OA might stimulate the emergence of rare species and promote community diversity to some extent.In addition,we confirmed that the offshore area wasn’t the refuge for benthic foraminifera while the nearshore one had more resistance to moderate acidification.Calcareous species Protelphidium tuberculatum was the dominant species occupying on average 75%in all treatments and its shell diameter,weight and thickness showed a decrease,indicating the decrease of calcification of benthic foraminifera.A relationship between the weight of P.tuberculatum and pCO_(2)(R^(2)=0.96)was established.Based on the present work,calcareous benthic foraminifera deposited 8.57104 t calcium carbonate per year and this might reduce by nearly half and 90%under 800 and 1200 ppm scenarios,which indicates a biocalcification crisis under ongoing OA.This work shows an analogy for palaeoceanic OA and also provides new insights into the sediment of calcium carbonate in the future.展开更多
基金The research was carried out within the framework of the grant for state support of leading scientific schools of the Russian Federation(Grant No.NSh-1010.2022.1.5).
文摘Survey and novel research data are used in the present study to classify/identify the lithological type of Verey age reservoirs’rocks.It is shown how the use of X-ray tomography can clarify the degree of heterogeneity,porosity and permeability of these rocks.These data are then used to elaborate a model of hydraulic fracturing.The resulting software can take into account the properties of proppant and breakdown fluid,thermal reservoir conditions,oil properties,well design data and even the filtration and elastic-mechanical properties of the rocks.Calculations of hydraulic fracturing crack formation are carried out and the results are compared with the data on hydraulic fracturing crack at standard conditions.Significant differences in crack formation in standard and lithotype models are determined.It is shown that the average width of the crack development for the lithotype model is 2.3 times higher than that for the standard model.Moreover,the coverage of crack development in height for the lithotype model is almost 2 times less than that for the standard model.The estimated fracture half-length for the lithotype model is 13.3%less than that of for the standard model.A higher dimensionless fracture conductivity is also obtained for the lithotype model.It is concluded that the proposed approach can increase the reliability of hydraulic fracturing crack models.
基金the National Natural Science Foundation of China(22078326,21878305,21908227)。
文摘In order to avoid the formation ofηphase(W_(6)Co_(6)C or W_(3)Co_(3)C)that adversely affects the sintering process and its products in the preparation process of ultra-fine WC-Co powder,a technical route of prereduction of WO_(3)-Co_(3)O_(4)to WO_(2)-Co and then deep reduction carbonization to WC-Co powder has been proposed.This study mainly investigates the influence of gas partial pressure on the pre-reduction process of WO_(3)-Co_(3)O_(4)under a mixed atmosphere of H_(2)-C_(2)H_(4)-Ar at 600℃and establishes the kinetic equations of pre-reduction and carbon evolution.The results indicate that increasing the partial pressure of hydrogen is conducive to the rapid and complete conversion of WO_(3) to WO_(2).High carbon content can be generated by the deposition of C_(2)H_(4),and it hinders the diffusion of the reducing gas;WO_(3)still cannot be completely reduced to WO_(2)as the partial pressure of C_(2)H_(4) increases to 60%.For the carbon evolution of C_(2)H_(4),the carbon amount is positively related to the H_(2)partial pressure,but it shows the highest amount and evolution rate when the ethylene partial pressure is 20%.Based on the reduction rate curves of WO_(3) and carbon evolution rate curves of C_(2)H_(4),the rate equations of pre-reduction and carbon evolution of WO_(3)-Co_(3)O_(4)system at 600℃are established.The pre-reduction reaction belongs to the first-order reaction,and its equation is expressed as follows:r=-(dw_(WO_(3)))/dt=(9±0.15)×10^(-2)×P_(H_(2))^(0.44)P_(C_(2)H_(4))&(0.57)The carbon deposition rate equation of C_(2)H_(4) can be expressed as follows:r=-(dc_C)/dt=r_f-r_b≌7.35×10^(-2)×P_(C_(2)H_(4))^(0.31)
基金funded by the National Science and Technology Major Project“The evaluations of deepwater oil and gas geological conditions and targets in Zhongjian area of the South China Sea”(No.2017ZX05026006)the CNPC Science and Technology Major Projects(No.2019A-1009&2019D4309)+1 种基金the Strategic Priority Research Program of the Chinese Academy of Sciences(No.XDA13010101)National Natural Science Foundation of China(No.41706054)。
文摘Newly-acquired seismic data reveal widespread carbonate deposits covering a large part of the northwestern South China Sea margin.Three carbonate platforms are identified to have developed on the topographic highs inherited from tectonic deformation and volcanic accretion.Across the carbonate platforms,the Miocene strata are characterized by high-amplitude seismic reflections and distinct platform architecture that overlaps older strata.The Guangle and Xisha carbonate platforms grew on faulted blocks due to South China Sea continental rifting,while the Zhongjian carbonate platform developed on a structural high induced by early Miocene volcanism.During the late Miocene,partial drowning resulted in the inhibition of platform growth,eventual platform drowning and termination of most carbonate deposition.The drowning of the Guangle and Zhongjian carbonate platforms is shown by the supply of siliciclastic sediments during the late Miocene and seems to be closely linked to late Neogene volcanic activity,whilst the drowning of the Xisha carbonate platform is primarily related to relative eustatic changes.Our results imply that tectonic activity,volcanism and eustasy are the dominant controls on the evolution of carbonate platforms on the northwestern margin of the South China Sea.
基金funded by the National Natural Science Foundation of China(grant No.41572117)Technological&Developmental Department of China Petroleum&Chemical Corporation(grants No.P13040 and P14128)China Geological Survey(grant No.DD20160175-1-1)
文摘Objective The Yubei area is located in the mid-east Maigaiti slope of southwestern Tarim Basin,China,with an exploration history of several years.Recent exploration has preliminarily indicated that the Ordovician carbonate formations in this area have some oil and gas potential.Carbonate microfacies provides material basis for reservoir development,seal formation and
基金partly supported by the New Energy and Industrial Technology Development Organization(NEDO)by the Japan Society for the Promotion of Science KAKENHI(21K14090)+3 种基金the National Key R&D Program of China(2019YFE0122000)the Scientific Research Foundation of Graduate School of Southeast University(YBPY2106)the China Scholarship Councilby the Advanced Research Infrastructure for Materials and Nanotechnology in Japan(ARIM Japan)sponsored by the Ministry of Education,Culture,Sport,Science and Technology(MEXT),Japan。
文摘In the present study,two Ni/YSZ anodes with different volume ratios of Ni and YSZ,30:70 and 45:55 vol%,are operated in dry methane under open circuit and polarized conditions.Three-dimensional(3D)Ni/YSZ microstructures after carbon deposition are reconstructed by the focused ion beam-scanning electron microscopy(FIB-SEM)with the help of machine learning segmentation.From the reconstructed mircostructures,volume fraction,connectivity,three phase boundary(TPB)density,and tortuosity are quantified.In addition,local carbon microstructures are quantitatively reconstructed,and the effect of polarization on carbon morphology is investigated.It is demonstrated that Ni surface in the vicinity of active TPB near the electrolyte is free from carbon formation,while remaining Ni surface at some distances from TPB exhibits severe carbon deposition.In average,total amount of carbon deposition is larger near the electrolyte.These observations imply complex interplay between the electrochemical steam generation and methane cracking on Ni surface which take place very locally near the active TPB.
基金supported by the National Basic Research Program of China(2013CB228104)
文摘In situ catalytic conversion of biomass fast pyrolysis vapors was carried out on HZSM-5 with varying Si/Al ratios(ranging from 20 to 300) at 450 °C. The effects of Si/Al ratios of HZSM-5 zeolites on the distribution of biomass fast pyrolysis products and carbon deposits on catalysts were investigated. It was quite remarkable that after in situ catalytic conversion the amount of light phenols and hydrocarbons increased significantly while that of heavy phenols decreased a lot. Besides, the yield of cyclopentenones with relatively low oxygen content generally increased. It also indicated that as the Si/Al ratios of HZSM-5 increased, the amount of hydrocarbons and light phenols was found to drop greatly. The amount of carbon deposits was found to be around 8.5% with the exception of HZSM-5 with the Si/Al ratio of 300,which is much lower. Moreover, the carbon deposits yield dropped gradually with increasing Si/Al ratios of HZSM-5.Calcination of spent catalysts at 600 °C helped to restore the catalytic activity to a large extent despite a relatively lower efficiency of deoxygenation. Results indicated that HZSM-5 with relatively high acidity displayed great catalytic performance.
基金supported by National Natural Science Foundation of China(Nos.91941105,91941301,51790511)。
文摘To improve the‘detonation-supporting’performance of fuel-rich catalytic combustion products,DBD plasma,stimulated by adjustable nanosecond pulse power supply,was used to further regulate the components and concentrations of the hydrocarbon blends.In this paper,the parameters including load voltage,frequency,rising(falling)edge,pulse width and feeding flow rate were changed respectively,and the corresponding concentration and proportion change of the components in blend gas were investigated.According to the experiment result,it was found that when the discharge frequency is low,the plasma mainly promotes the transformation of light gaseous substances,while it mainly promotes the conversion to heavy hydrocarbons when the frequency is larger.Increasing load voltage will strengthen this trend.The controlling and reforming effect of plasma on the blend gas will decrease with the increase of voltage rising(falling)edge and the feeding flow rate.The regulation effect will be strengthened with the increase of pulse width under 200 ns.With the increase of discharge intensity,the‘carbon’settles on the walls of the reactor,which will change the dielectric constant,leading to the loss of control of the discharge.
基金This project was supported by Australian Research Council(DP180100731,DP 180100568)JSPS Joint Research Project(Open Partnership)under bilateral program between Japan and Australia(FY 2019-FY2020,DG 1270).
文摘High temperature solid oxide fuel cell(SOFC)is the most efficient and clean energy conversion technology to electrochemically convert the chemical energy of fuels such as hydrogen,natural gas and hydrocarbons to electricity,and also the most viable alternative to the traditional thermal power plants.However,the power output of a SOFC critically depends on the characteristics and performance of its key components:anode,electrolyte and cathode.Due to the highly reducing environment and strict requirements in electrical conductivity and catalytic activity,there are limited choices in the anode materials of SOFCs,particularly for operation in the intermediate temperature range of 500–800C.Among them,Ni-based cermets are the most common and popular anode materials of SOFCs.The objective of this paper is to review the development of Ni-based anode materials in SOFC from the viewpoints of materials microstructure,performance and industrial scalability associated with the fabrication and optimization processes.The latest advancement in nano-structure architecture,contaminant tolerance and interface optimization of Ni-based cermet anodes is presented.And at the end of this paper,we propose and appeal for the collaborative work of scientists from different disciplines that enable the inter-fusion research of fabrication,microanalysis and modelling,aiming at the challenges in the development of Ni-based cermet anodes for commercially viable intermediate temperature SOFC or IT-SOFC technologies.
基金financial support by the National Natural Science Foundation of China (21273151)China Ministry of Science and Technology (2016YFA0202802)Strategic Priority Research Program of the Chinese Academy of Sciences (XDA07040200)
文摘To gain deep insight into the Morphological effect of Ni_xMg_(1-x)O catalysts on the reaction of CO_2 reforming with methane, we designed and fabricated three different spatial structural Ni_xMg_(1-x)O catalysts.These Ni_xMg_(1-x)O catalysts with specific models such as rod, sheet and sphere, exhibited various activity and stability in CO_2 reforming reaction. Herein Ni_xMg_(1-x)O nanorods displayed higher catalytic activity, in which methane conversion was up to 72% and CO_2 conversion was 64% at 670°C with a space velocity of 79,200 mL/(gcath), compared with nanosheet and nanosphere counterparts. Furthermore, both catalysts of Ni_xMg_(1-x)O nanorod and nanosheet showed a high resistance toward coke deposition and sintering of active sites in the process of CO_2 reforming of methane.
基金supported by the Innovation Fund for Chemistry of NWO,grant number 731.014.303by SASOL。
文摘The effect of temperature and hydrogen addition on undesired carbonaceous deposit formation during methane coupling was studied in DBD-plasma catalytic-wall reactors with Pd/Al2 O3, using electrical power to drive the reaction.Experiments with thin catalyst layers allowed comparison of the performance of empty reactors and catalytic wall reactors without significantly influencing the plasma properties.The product distribution varies strongly in the temperature window between 25 and 200℃Minimal formation of deposits is found at an optimal temperature around 75℃ in the catalytic-wall reactors.The selectivity to deposits was c.a.10% with only 9 mg of catalyst loading instead of 45% in the blank reactor,while decreasing methane conversion only mildly.Co-feeding H2 to an empty reactor causes a similar decrease in selectivity to deposits,but in this case methane conversion also decreased significantly.Suppression of deposits formation in the catalytic-wall reactor at 75℃ is due to catalytic hydrogenation of mainly acetylene to ethylene.In the empty reactor,H2 co-feed decreases conversion but does not change the product distribution.The catalytic-wall reactors can be regenerated with H2-plasma at room temperature,which produces more added-value hydrocarbons.
基金supported by the Strategic Priority Research Program of the Chinese Academy of Sciences(XDB17020100)the National Key R&D Program of China(2016YFA0202-801)+1 种基金the National Natural Science Foundation of China(NSFC)grants(21676269,21706254,21878283,22022814)the Dalian Institute of Chemical Physics,CAS(DICP I201916)。
文摘Thermochemical two-step CO_(2) splitting is a potential approach that fixes the sustainable resource into transportable liquid fuels.However,the harsh CO_(2) splitting conditions,the limited oxygen release kinetics and capacity of metal oxides block further promoted the CO yield and solar-to-fuel energy efficiency.Here,we propose a different carbon cycle assisted by Ni/La_(2)O_(3) via coupling methane decomposition with thermochemical CO_(2) splitting,replacing conventional metal oxides cycle.Superior performance was demonstrated with methane conversion reached around 94%with almost pure H_(2) generation.Encouragingly,CO_(2) conversion of 98%and CO yield of 6.9 mmol g^(-1) derived from CO_(2) were achieved,with peak CO evolution rate(402 mL min^(-1) g^(-1))of orders of magnitude higher than that in metal oxide process and outstanding thermodynamic solar-to-fuel energy efficiency(55.5%vs.18.5%).This was relevant to the synergistic activation of La_(2)O_(3) and Ni for CO_(2) in carbon cycle,thus improving CO_(2) splitting reaction with carbon species.
文摘a-C:F films are deposited by microwave electron cyclotron resonance (ECR)plasma chemical vapor deposition (CVD) using trifluoromethane (CHF3) and benzene (C6H6) as source gases at different microwave powers. The radicals in plasma originating from source gases dissociation are analyzed by relative irradiance measurement. The bonding configurations and binding state of a-C:F films are measured with Fourier-transformed infrared spectrometer (FTIR) and x-ray photoelectron spectroscopy (XPS). The results show that a-C:F films are mainly composed of CF radical at lower powers but of CF2 radical at higher powers. The deposition of films is related to the radicals generated in plasma and the main bonding configurations are dependent on the ratio of CF to CF2 radicals in films.
文摘Initial process is influenced by substrate microstructure according to the study of initial stage of electroless plating on low carbon steel and pure iron. For low carbon steels, depositing on cementite is prior to that on ferrite, and for pure iron, the grain boundaries and some favourable grains are deposited more easily. The initial reactions of electroless depositing of Ni-P alloy have been tentatively
文摘Iran is host to more than 285 zinc and lead carbonated host deposits including world-class deposits such as Mehdi Abad and Irankouh. Emarat deposit is located in Sanandaj-Sirjan zone and Malayer-Isfahan metallogenic province (northwestern part of Sanandaj-Sirjan tectonic zone). In the area, the mineralization has stratabound shape and restricted to Early Cretaceous limestones and dolomites. With investigation of the optical properties in microscopic survey and evaluation results of analysis, sphalerite, galena, pyrite and chalcopyrite were recognized as the main minerals, covellite, tennantite-tetrahydrite and serosities, quartz and barite as the secondary minerals and gyps, smithsonite were recognized as the minorminerals in the samples. Silicification alteration acted as major process in studied deposit and dolomitization, pyritization and hematitization also were observed in the deposit. Evidences show that mineralization has occurred in post diagenetic stage (epigenetic type) and after tectonic influence.
文摘A-C:F, H film have been studied because of their low dielectric constant for application in interlayer dielectric in ULSC. These films were deposited by ECR plasma Reactor with CHF3 and C6H6 mixture as source gas. The effects of microwave power, pressure and CHF3/C6H6 ratios on the film deposition rates have been investigated. The fluorocarbon and hydrocarbon radical species in the plasma discharges were analyzed by using the optical emission spectra. It demonstrates that CF2, CF and CH radicals play the important roles in the films being formed.
基金supported by Chinese National Key R&D Project(Grant No.2019YFC0605501)Strategic Priority Research Program of the Chinese Academy of Sciences(Grant No.XDA14010401)+1 种基金National Natural Science Foundation of China(Grant No.41821002)Shandong Provincial Natural Science Foundation,China(Grant No.ZR2018BD018)。
文摘Hiatuses are ubiquitous in stratigraphic records at various temporal scales,but they cannot be easily identified and quantified owing to the lack of adequate methods in determining the duration of hiatuses or stratal completeness.Here a processbased stratigraphic forward modeling(SFM)approach was used to effectively estimate the completeness of carbonate strata in three dimensions and at basin-scale.By using information derived from both spatial and temporal domains in the SFM outputs for five grid locations(pseudo wells)under different depositional settings,we were able to delineate basin-wide hiatuses of various temporal scales and determine their durations and stratal completeness quantitatively.The stratal completeness appears to be controlled by sea level changes,depositional environments,carbonate growth rates and tectonic subsidence patterns in various ways.
基金Project supported by the Natural Science Foundation of Hunan Province,China (2022JJ30133)。
文摘Ni/CeO_(2) catalysts(nCeO_(2):n_(Ni)=0,1,4,7,10)supported on SiC porous ce ramics for ethanol steam reforming(ESR)were investigated with respect to hydrogen production performance and growth of carbon deposition.The oxygen released from CeO_(2) enables the oxidation of CH_(x) species to serve as carbon precursors,thus providing Ni/CeO_(2) catalysts with stronger resistance to carbon deposition compared with Ni catalysts.The Ni/CeO_(2) catalysts prepared by inverse microemulsion and impregnation methods exhibit regular semicircular spherical shape on SiC porous ceramics.Under 500℃for 25 h of ESR reaction,the ethanol conversion rate over Ni/CeO_(2) catalysts(n_(CeO_(2)):n_(Ni)=7)is sustained up to 100%and H_(2) selectivity is essentially kept at 74%.The by-product selectivity declines stepwise with increasing content of CeO_(2),which is attributed to the adsorption and oxidation of CO and of CH_(x) species as CH_4 precursor from CeO_(2).The scanning electron microscopy(SEM)and transform electron microscopy(TEM)results reveal that further loading of CeO_(2) on the surface of Ni catalysts can alleviate both migration and sintering of Ni particles.Furthermore,carbon deposition on Ni/CeO_(2) catalysts preferentially outgrow filamentous rather than amorphous carbon,with a tendency for the latter to be more deactivated.
基金supports from the following projects:the National Natural Science Foundation of China(Nos.41976058,U1906211)the Strategic Priority Research Program of the Chinese Academy of Sciences(No.XDB42000000)Natural Science Foundation of Shandong Province(Grant No.ZR2021QD004)。
文摘Ocean acidification(OA)is a persistent challenge for humans and is predicted to have deleterious effects on marine organisms,especially marine calcifiers such as coral and foraminifera.Benthic foraminifera is an important component of sediment in the continental shelf,while little is known about the impact of ocean acidification on benthic foraminifera both at the community and individual level and associated calcium carbonate deposition.We conducted eight months continued culture experiment under the scenario of 400,800,1200 and 1600 ppm pCO_(2)gradients on living benthic foraminifera from four stations in the continental shelf of the West Pacific Ocean.Statistic results showed OA had a negative effect on the abundance of benthic foraminifera.In contrast,the diversity increased roughly under OA conditions implying OA might stimulate the emergence of rare species and promote community diversity to some extent.In addition,we confirmed that the offshore area wasn’t the refuge for benthic foraminifera while the nearshore one had more resistance to moderate acidification.Calcareous species Protelphidium tuberculatum was the dominant species occupying on average 75%in all treatments and its shell diameter,weight and thickness showed a decrease,indicating the decrease of calcification of benthic foraminifera.A relationship between the weight of P.tuberculatum and pCO_(2)(R^(2)=0.96)was established.Based on the present work,calcareous benthic foraminifera deposited 8.57104 t calcium carbonate per year and this might reduce by nearly half and 90%under 800 and 1200 ppm scenarios,which indicates a biocalcification crisis under ongoing OA.This work shows an analogy for palaeoceanic OA and also provides new insights into the sediment of calcium carbonate in the future.
