The treatment and disposal of radioactive waste are presently facing great challenges.Spent ion exchange resins have become a focus of attention due to their high production and serious environmental risks.In this pap...The treatment and disposal of radioactive waste are presently facing great challenges.Spent ion exchange resins have become a focus of attention due to their high production and serious environmental risks.In this paper,a simplified model of cationic exchange resin is proposed,and the degradation processes of cationic resin monomer initiated by hydroxyl radicals(·OH)are clarified by combining statistical molecular fragmentation(SMF)model and density functional theory(DFT)calculations.The prediction of active sites indicates that the S-O bonds and the C-S bond of the sulfonic group are more likely to react during the degradation.The meta-position of the sulfonic group on the benzene ring is the most active site,and the benzene ring without the sulfonic group has a certain reactivity.The C11-C14 and C17-C20 bonds,on the carbon skeleton,are the most easily broken.It is also found that dihydroxy addition and elimination reactions play a major role in the process of desulfonation,carbon skeleton cleavage and benzene ring separation.The decomposition mechanisms found through the combination of physical models and chemical calculations,provide theoretical guidance for the treatment of complex polycyclic aromatic hydrocarbons.展开更多
This study assessed the adsorption process and the reaction kinetics involved in the selective recovery of vanadium from an acid solution containing iron as an impurity.Four commercial resins were studied:Lewatit^(...This study assessed the adsorption process and the reaction kinetics involved in the selective recovery of vanadium from an acid solution containing iron as an impurity.Four commercial resins were studied:Lewatit^(®)MonoPlus TP 209 XL,Lewatit^(®) TP 207,Dowex^(TM)M4195(chelating resin)and Lewatit^(®) MonoPlus S 200 H(strong cationic exchange resin).To investigate the effect of time on the adsorption process,batch experiments were carried out using the following initial conditions:pH 2.0,298 K,and a proportion of 1 g of resin to 50 mL of solution.The variation of pH over time was analyzed.Chelating resin released less H+ions as the adsorption occurred,resulting in a lower drop of pH when compared to S 200 H resin.Ion adsorption by the resins was also evaluated through FT-IR and SEM−EDS before and after the experiments.Among the evaluated kinetic models(pseudo-first order,pseudo-second order,Elovich and intraparticle diffusion models),the pseudo-second order model best fits the experimental data of the adsorption of vanadium and iron by all of the four resins.M4195 resin showed the highest recovery of vanadium and the lowest adsorption of iron.Kinetic data,which are fundamental to industrial processes applications,are provided.展开更多
In this study,we reported on the concept and practical use of cation exchange resin(CER)for removing anions in water via pretreating the CER with metal salts.The cation exchange resinsupported iron and magnesium oxide...In this study,we reported on the concept and practical use of cation exchange resin(CER)for removing anions in water via pretreating the CER with metal salts.The cation exchange resinsupported iron and magnesium oxides/hydroxides composite(FeMg/CER)was synthesized and introduced as a new and potential adsorbent for selective removal of nitrate ion in the water environment.Characteristics of FeMg/CER were determined by techniques such as Fouriertransform infrared spectroscopy,scanning electron microscopy,and Xray diffraction.The results showed that FeMg/CER material had a high nitrate adsorption capacity of 200 mg NO_(3)^()·g^(1)with a fast equilibrium adsorption time of 30 min at pH 5.In addition,it had good durability of at least 10 times of regeneration,which could be applied to practical water and wastewater treatment.展开更多
This study describes the kinetics and thermodynamics of the esterification of acidified oil with methanol catalyzed by sulfonated cation exchange resins（SCER）. The effects of the mass ratio of methanol to acidified ...This study describes the kinetics and thermodynamics of the esterification of acidified oil with methanol catalyzed by sulfonated cation exchange resins（SCER）. The effects of the mass ratio of methanol to acidified oil,reaction temperature,and catalyst loading were studied to optimize the conditions for maximum conversion of free fatty acids（FFAs）. The results showed that the optimal conversion rate of FFAs was 91.87% at the mass ratio of methanol to acidified oil of 2.5：1.0,reaction temperature of 65.0 °C,catalyst loading of 5.0 g and reaction time of 8.0 h. The external and internal mass transfer resistances were negligible based on the experimental results and a pseudo-homogeneous kinetic model was proposed for the esterification. The activation energy and thermodynamic parameters including G,S and H were determined. The conversion rates of FFAs obtained from the established model were in good agreement with the experimental data.展开更多
The polystyrene cation exchange resin was exchanged by La 3+ and then were carbonized to make resin carbon material. The electrochemical properties of the resin carbon material as the electrode of the lithium ion...The polystyrene cation exchange resin was exchanged by La 3+ and then were carbonized to make resin carbon material. The electrochemical properties of the resin carbon material as the electrode of the lithium ion cell were investigated. The test results show that comparing with the polystyrene cation exchange resin without adulterating, the contents of hydrogen, oxygen and sulfur are changed obviously for the resin carbon material derived from the La 3+ adulterating polystyrene cation exchange resin. The contents of hydrogen and oxygen are increased, and the one of sulfur is decreased. The test results also indicate that it is more easily to form the stratum graphite minicrystal structure with bigger diameter for the La 3+ adulterating resin. According to the electrochemical test results, the electrode derived from La 3+ adulterating polystyrene cation exchange resin has much better electrochemical property, and the capacity of charge and discharge of the electrode is increased about 30 mAh·g -1 in average.展开更多
Strongly acidic cation exchange resin(1x1,H form)has been successfully used as a catalyst in synthesis of diphenyl N-benzyloxycarbonyl-1-aminobenzylphosphonate, N-benzyloxycarbonyl-1-aminobenzylphenylphosphinic acid a...Strongly acidic cation exchange resin(1x1,H form)has been successfully used as a catalyst in synthesis of diphenyl N-benzyloxycarbonyl-1-aminobenzylphosphonate, N-benzyloxycarbonyl-1-aminobenzylphenylphosphinic acid and N-p-tolylsulfonyl-1-aminobenzyl phenylphosphinic acid in high yields.展开更多
In this paper, it was investigated that the effect of parameters such as the ionic strength, pH, counter-ion type of release medium, particle size, and cross linkage of cation exchange resin on the release of model dr...In this paper, it was investigated that the effect of parameters such as the ionic strength, pH, counter-ion type of release medium, particle size, and cross linkage of cation exchange resin on the release of model drug pseudoephedrine hydrochloride (PE) from uncoated drug-resin complex. The drug-resin complex was prepared by the reaction of PE with strongly acidic cation exchange resin (001×4, 001×7, 001×14). The result showed that the loading of PE increased with the increase of temperatures. The release of PE from drug-resin complex at 37℃ was monitored in vitro. From the experiments, it was found that the release rate of PE depends on the pH, composition of the releasing media, increased at lower pH media or with increase of ionic strength of media. Moreover, the release rate of PE was inversely proportional to the cross-linkage and particle size of the cation exchange resin.展开更多
To develop a simple and rapid purification method of rohitukine from the stem bark of Dysoxylum binectariferum. A L9 （34） orthogonal test was designed to optimize the extraction condition. Rohitukine in the plant e...To develop a simple and rapid purification method of rohitukine from the stem bark of Dysoxylum binectariferum. A L9 （34） orthogonal test was designed to optimize the extraction condition. Rohitukine in the plant extract was purified by using solvent-solvent partition and cation exchange resion （CER）. Five different types of packing materials, including XAD-2 resin, polyamide, Sephadex LH-20, ODS and CER, were compared and CER showed the best capacity for rohitukine separation. The purification procedure was optimized as follows： the plant material powder was extracted with 70% ethanol （v/m = 60） by ultrasonic agitation for 60 min, then the 70% ethanol extract was dissolved in aqueous solution （pH 1, adjusted with 0.5 mol/L HCl） and extracted with equal volume of n-butanol. The aqueous layer was retained and the pH was adjusted to 10 with 25% aqueous ammonia and a solventsolvent partition was performed with equal volume of n-butanol. The obtained n-butanol extract was dissolved in aqueous solution （pH 1, adjusted with 0.5 mol/L HCl）, and purified by a CER column eluting with H2O and 70% ethanol （pH 10, adjusted with 25% aqueous ammonia）, successively. Rohitukine existed in 70% ethanol eluate, with a purity up to 53.3%. The method developed in this study provides a simple and rapid approach for the preparation of rohitukine from the stem bark ofD. binectariferum.展开更多
Pyrolysis is a cost-effective and safe method for the disposal of radioactive spent resins.In this work,the catalytic effects of V_(2)O_(5) on the pyrolysis of cation exchange resin are investigated for the first time...Pyrolysis is a cost-effective and safe method for the disposal of radioactive spent resins.In this work,the catalytic effects of V_(2)O_(5) on the pyrolysis of cation exchange resin are investigated for the first time.The results show that it is a better catalyst than others so far studied and achieves a lowering of final pyrolysis temperature and residual rate simultaneously when aided by physical blending.The maximum reductions of the final pyrolysis temperature and the residual rate are 173℃and 11.9%(in weight),respectively.Under the action of V_(2)O_(5),low-temperature(445℃)removal of partial sulfonic acid groups occurs and the pyrolysis of the resin copolymer matrix is promoted.This is demonstrated by the analysis of pyrolysis residues at different temperatures by X-ray photoelectron spectroscopy(XPS)and element analysis.The catalytic activity of V_(2)O_(5) is determined by effects both at acid sites and oxidation-reduction centers via H2-TPR(temperature programmed reduction),V_(2)-TPD(temperature programmed desorption),CV_(2)-TPD,and NH3-TPD.The catalytic effect of oxidation-reduction centers in V_(2)O_(5) is achieved by close contact with the sulfur bond through chemisorption under the effect of acid sites.V_(2)O_(5) is also believed to be the reason for the removal of partial sulfonic acid groups at lower temperatures(445℃).V_(2)O_(5) is an effective catalyst for spent resin pyrolysis and can be further applied in industry.展开更多
Self-made cation exchange resin supported nanoscale zero-valent iron （R-nZVI） was used to remove phosphorus in rainwater runoff. 80% of phosphorus in rainwater runoff from grassland was removed with an initial conce...Self-made cation exchange resin supported nanoscale zero-valent iron （R-nZVI） was used to remove phosphorus in rainwater runoff. 80% of phosphorus in rainwater runoff from grassland was removed with an initial concentration of 0.72 mg. L-1 phosphorus when the dosage of R-nZVl is 8 g per liter rainwater, while only 26% of phosphorus was removed when using cation exchange resin without supported nanoscale zero-valent iron under the same condition. The adsorption capacity of R-nZVI increased up to 185 times of that of the cation exchange resin at a saturated equilibrium phosphorous concentration of 0.42 mg. L-1. Various techniques were implemented to characterize the R-nZVI and explore the mechanism of its removal of phosphate. Scanning electron microscopy （SEM） indicated that new crystal had been formed on the surface of R-nZVI. The result from inductive coupled plasma （ICP） indicated that 2.1% of nZVI was loaded on the support material. The specific surface area was increased after the load of nanoscale zero-valent iron （nZVI）, according to the measurement of BET-N2 method. The result of specific surface area analysis also proved that phosphorus was removed mainly through chemical adsorption process. X-ray photoelectron spectroscopy （XPS） analysis showed that the new product obtained from chemical reaction between phosphate and iron was ferrous phosphate.展开更多
EVAL hollow fiber membrane adsorbents filled with powder D061-type cation exchange resin were prepared through dry-wet spinning process,using hydrophilic copolymer EVAL as the fiber substrate.The microstructures of th...EVAL hollow fiber membrane adsorbents filled with powder D061-type cation exchange resin were prepared through dry-wet spinning process,using hydrophilic copolymer EVAL as the fiber substrate.The microstructures of the membrane adsorbents were observed,and the pure water fluxes,BSA rejection,and static adsorption capacities of membrane adsorbents for BSA were measured.The effect of the resin-filled content on membrane performance has been discussed.The results showed that EVAL hollow fiber membrane adsorbents filled with D061-type cation exchange resins had good adsorption capacity,and the adsorption capacity increased with the quantity of the resin-filled content.The static protein adsorption capacity was 77.14 mg BSA/g membrane adsorbents when D061 resin loading content was 65%at pH 4.5.展开更多
The performance of adsorption and separation for liensinine, isoliensinine and neferine was studied by double-column adsorption chromatography using macroporous adsorption and cation exchange resins. The alkaloid extr...The performance of adsorption and separation for liensinine, isoliensinine and neferine was studied by double-column adsorption chromatography using macroporous adsorption and cation exchange resins. The alkaloid extract with 49.2% total contents by mass representing 10.6% liensinine, 10.6% isoliensinine and 28.0% neferine respectively was prepared by D72 cation exchange resins, in which most of the impurities were water-soluble alkaloids. Furthermore,the alkaloid extract with 82.6% total contents by mass containing 33.1%, 15.0% and 34.5% of the three adsorbates respectively was prepared by double-column adsorption chromatography using AKS-W macroporous adsorption and D72 cation exchange resins. As a result, the content of single and total alkaloids has been greatly increased by the double-column adsorption chromatography.展开更多
2-Acryloxyacetophenone （AAP） was prepared and subjected to suspension polymerization with methyl methacrylate （MMA） using azobisisobutyronitrile （AIBN） as free radical initiator. The differently sulfonated AAP-M...2-Acryloxyacetophenone （AAP） was prepared and subjected to suspension polymerization with methyl methacrylate （MMA） using azobisisobutyronitrile （AIBN） as free radical initiator. The differently sulfonated AAP-MMA cross-linked copolymer cationic exchange resins were prepared by sulfonation with concentrated sulphuric acid at 70 ~C. Several characteristics of the prepared resins were evaluated, i.e. FTIR, the ion-exchange capacity （IEC）, thermo gravimetric analysis （TGA）, particle size distribution and microscopic morphology. The resin characteristics were altered with degree of sulfonation, providing that differently sulfonated resins could be prepared. The behavior of atenolol （ATL） loading and in vitro release in the USP stimulated gastric and intestinal fluids of the obtained resins were evaluated. The drug loaded in the resin increased with increasing degree of sulfonation and hence the drug binding site in resin employed. The drug release was lower from the resins with higher content of sulfonic group due to the increase in the diffusive path depth. The drug release was a little lower in stimulated gastric fluid （SGF） than in stimulated intestinal fluids （SIF）. The basic groups, ionized to a little greater extent in SGF and preferred binding with the resin rather than releasing. Hence, the differently sulfonated resins could be utilized as novel carriers for drug delivery.展开更多
N-nitrosodimethylamine（NDMA） precursors consist of a positively charged dimethylamine group and a non-polar moiety, which inspired us to develop a targeted cation exchange technology to remove NDMA precursors. In th...N-nitrosodimethylamine（NDMA） precursors consist of a positively charged dimethylamine group and a non-polar moiety, which inspired us to develop a targeted cation exchange technology to remove NDMA precursors. In this study, we tested the removal of two representative NDMA precursors, dimethylamine（DMA） and ranitidine（RNTD）, by strong acidic cation exchange resin. The results showed that pH greatly affected the exchange efficiency, with high removal（DMA 〉 78% and RNTD 〉 94%） observed at pH 〈 pk_a-1 when the molar ratio of exchange capacity to precursor was 4. The exchange order was obtained as follows： Ca^（2＋）〉 Mg^（2＋）〉 RNTD~＋〉 K~＋〉 DMA~＋〉 NH_4~＋〉 Na~＋. The partition coefficient of DMA~＋to Na~＋was 1.41 ± 0.26, while that of RNTD~＋to Na~＋was 12.1 ± 1.9. The pseudo second-order equation fitted the cation exchange kinetics well. Bivalent inorganic cations such as Ca^（2＋）were found to have a notable effect on NA precursor removal in softening column test. Besides DMA and RNTD, cation exchange process also worked well for removing other 7 model NDMA precursors. Overall, NDMA precursor removal can be an added benefit of making use of cation exchange water softening processes.展开更多
Objective To explore the optimum condition for complex enzyme-assisted extraction of galanthamine from Lycoris aurea by L_9（3~4） orthogonal array design and separation effect of cation exchange resin on galanthamine...Objective To explore the optimum condition for complex enzyme-assisted extraction of galanthamine from Lycoris aurea by L_9（3~4） orthogonal array design and separation effect of cation exchange resin on galanthamine. Methods Cellulase and pectinase solution was used as the extraction solvent. The effects of p H value of enzyme, amount of complex enzyme, dissociation time, and enzymatic hydrolysis temperature on the extraction results were investigated. Results The optimal conditions were obtained as follows： ratio of solid to liquid（g：mL） 1：10, pH value 4.5, amount of complex enzymes 4%, enzymatic hydrolysis temperature 50oC, and reaction time 2.0 h. Under these conditions, the extraction yield of galanthamine was 0.0294%. In addition, D-001 cation exchange resin was selected for separation of galanthamine. The separation conditions were that adsorption flow rate was 3 BV/h with reagent of pH2 and the desorption flow rate was 3 BV/h with 70% ethanol solution containing 1.5 mol/L ammonia. After separation, the content of galanthamine was increased to 12.31%. Conclusion The results provide a reference for industrial production of galanthamine.展开更多
基金supported by the National Natural Science Foundation of China (No.22176067).
文摘The treatment and disposal of radioactive waste are presently facing great challenges.Spent ion exchange resins have become a focus of attention due to their high production and serious environmental risks.In this paper,a simplified model of cationic exchange resin is proposed,and the degradation processes of cationic resin monomer initiated by hydroxyl radicals(·OH)are clarified by combining statistical molecular fragmentation(SMF)model and density functional theory(DFT)calculations.The prediction of active sites indicates that the S-O bonds and the C-S bond of the sulfonic group are more likely to react during the degradation.The meta-position of the sulfonic group on the benzene ring is the most active site,and the benzene ring without the sulfonic group has a certain reactivity.The C11-C14 and C17-C20 bonds,on the carbon skeleton,are the most easily broken.It is also found that dihydroxy addition and elimination reactions play a major role in the process of desulfonation,carbon skeleton cleavage and benzene ring separation.The decomposition mechanisms found through the combination of physical models and chemical calculations,provide theoretical guidance for the treatment of complex polycyclic aromatic hydrocarbons.
基金provided by Conselho Nacional de Desenvolvimento Científico e Tecnológico(CNPq,grant 130978/2020-5)to the Fundação de AmparoàPesquisa do Estado de São Paulo(FAPESP,grant 2019/11866-5)to CAPES for the financial support.
文摘This study assessed the adsorption process and the reaction kinetics involved in the selective recovery of vanadium from an acid solution containing iron as an impurity.Four commercial resins were studied:Lewatit^(®)MonoPlus TP 209 XL,Lewatit^(®) TP 207,Dowex^(TM)M4195(chelating resin)and Lewatit^(®) MonoPlus S 200 H(strong cationic exchange resin).To investigate the effect of time on the adsorption process,batch experiments were carried out using the following initial conditions:pH 2.0,298 K,and a proportion of 1 g of resin to 50 mL of solution.The variation of pH over time was analyzed.Chelating resin released less H+ions as the adsorption occurred,resulting in a lower drop of pH when compared to S 200 H resin.Ion adsorption by the resins was also evaluated through FT-IR and SEM−EDS before and after the experiments.Among the evaluated kinetic models(pseudo-first order,pseudo-second order,Elovich and intraparticle diffusion models),the pseudo-second order model best fits the experimental data of the adsorption of vanadium and iron by all of the four resins.M4195 resin showed the highest recovery of vanadium and the lowest adsorption of iron.Kinetic data,which are fundamental to industrial processes applications,are provided.
基金Vietnam National University-Ho Chi Minh City under grant number A2020-16-01.
文摘In this study,we reported on the concept and practical use of cation exchange resin(CER)for removing anions in water via pretreating the CER with metal salts.The cation exchange resinsupported iron and magnesium oxides/hydroxides composite(FeMg/CER)was synthesized and introduced as a new and potential adsorbent for selective removal of nitrate ion in the water environment.Characteristics of FeMg/CER were determined by techniques such as Fouriertransform infrared spectroscopy,scanning electron microscopy,and Xray diffraction.The results showed that FeMg/CER material had a high nitrate adsorption capacity of 200 mg NO_(3)^()·g^(1)with a fast equilibrium adsorption time of 30 min at pH 5.In addition,it had good durability of at least 10 times of regeneration,which could be applied to practical water and wastewater treatment.
基金support from the Natural Science Foundation of Shandong Province (Grant no.ZR2013BL010)the Research Excellence Award of Shandong University of Technology and the Zibo Technology Research and Development Program of China (Grant no.2013GG04110)
文摘This study describes the kinetics and thermodynamics of the esterification of acidified oil with methanol catalyzed by sulfonated cation exchange resins（SCER）. The effects of the mass ratio of methanol to acidified oil,reaction temperature,and catalyst loading were studied to optimize the conditions for maximum conversion of free fatty acids（FFAs）. The results showed that the optimal conversion rate of FFAs was 91.87% at the mass ratio of methanol to acidified oil of 2.5：1.0,reaction temperature of 65.0 °C,catalyst loading of 5.0 g and reaction time of 8.0 h. The external and internal mass transfer resistances were negligible based on the experimental results and a pseudo-homogeneous kinetic model was proposed for the esterification. The activation energy and thermodynamic parameters including G,S and H were determined. The conversion rates of FFAs obtained from the established model were in good agreement with the experimental data.
文摘The polystyrene cation exchange resin was exchanged by La 3+ and then were carbonized to make resin carbon material. The electrochemical properties of the resin carbon material as the electrode of the lithium ion cell were investigated. The test results show that comparing with the polystyrene cation exchange resin without adulterating, the contents of hydrogen, oxygen and sulfur are changed obviously for the resin carbon material derived from the La 3+ adulterating polystyrene cation exchange resin. The contents of hydrogen and oxygen are increased, and the one of sulfur is decreased. The test results also indicate that it is more easily to form the stratum graphite minicrystal structure with bigger diameter for the La 3+ adulterating resin. According to the electrochemical test results, the electrode derived from La 3+ adulterating polystyrene cation exchange resin has much better electrochemical property, and the capacity of charge and discharge of the electrode is increased about 30 mAh·g -1 in average.
文摘Strongly acidic cation exchange resin(1x1,H form)has been successfully used as a catalyst in synthesis of diphenyl N-benzyloxycarbonyl-1-aminobenzylphosphonate, N-benzyloxycarbonyl-1-aminobenzylphenylphosphinic acid and N-p-tolylsulfonyl-1-aminobenzyl phenylphosphinic acid in high yields.
文摘In this paper, it was investigated that the effect of parameters such as the ionic strength, pH, counter-ion type of release medium, particle size, and cross linkage of cation exchange resin on the release of model drug pseudoephedrine hydrochloride (PE) from uncoated drug-resin complex. The drug-resin complex was prepared by the reaction of PE with strongly acidic cation exchange resin (001×4, 001×7, 001×14). The result showed that the loading of PE increased with the increase of temperatures. The release of PE from drug-resin complex at 37℃ was monitored in vitro. From the experiments, it was found that the release rate of PE depends on the pH, composition of the releasing media, increased at lower pH media or with increase of ionic strength of media. Moreover, the release rate of PE was inversely proportional to the cross-linkage and particle size of the cation exchange resin.
基金Scientific Research Foundation for the Returned Overseas Chinese Scholars by Ministry of Education of China (Grant No.[2004]527).
文摘To develop a simple and rapid purification method of rohitukine from the stem bark of Dysoxylum binectariferum. A L9 （34） orthogonal test was designed to optimize the extraction condition. Rohitukine in the plant extract was purified by using solvent-solvent partition and cation exchange resion （CER）. Five different types of packing materials, including XAD-2 resin, polyamide, Sephadex LH-20, ODS and CER, were compared and CER showed the best capacity for rohitukine separation. The purification procedure was optimized as follows： the plant material powder was extracted with 70% ethanol （v/m = 60） by ultrasonic agitation for 60 min, then the 70% ethanol extract was dissolved in aqueous solution （pH 1, adjusted with 0.5 mol/L HCl） and extracted with equal volume of n-butanol. The aqueous layer was retained and the pH was adjusted to 10 with 25% aqueous ammonia and a solventsolvent partition was performed with equal volume of n-butanol. The obtained n-butanol extract was dissolved in aqueous solution （pH 1, adjusted with 0.5 mol/L HCl）, and purified by a CER column eluting with H2O and 70% ethanol （pH 10, adjusted with 25% aqueous ammonia）, successively. Rohitukine existed in 70% ethanol eluate, with a purity up to 53.3%. The method developed in this study provides a simple and rapid approach for the preparation of rohitukine from the stem bark ofD. binectariferum.
基金Project supported by the National Natural Science Foundation of China(No.U1862203)the National Science Fund for Distinguished Young Scholars(No.21525627)the Science Fund for Creative Research Groups of National Natural Science Foundation of China(No.61621002)。
文摘Pyrolysis is a cost-effective and safe method for the disposal of radioactive spent resins.In this work,the catalytic effects of V_(2)O_(5) on the pyrolysis of cation exchange resin are investigated for the first time.The results show that it is a better catalyst than others so far studied and achieves a lowering of final pyrolysis temperature and residual rate simultaneously when aided by physical blending.The maximum reductions of the final pyrolysis temperature and the residual rate are 173℃and 11.9%(in weight),respectively.Under the action of V_(2)O_(5),low-temperature(445℃)removal of partial sulfonic acid groups occurs and the pyrolysis of the resin copolymer matrix is promoted.This is demonstrated by the analysis of pyrolysis residues at different temperatures by X-ray photoelectron spectroscopy(XPS)and element analysis.The catalytic activity of V_(2)O_(5) is determined by effects both at acid sites and oxidation-reduction centers via H2-TPR(temperature programmed reduction),V_(2)-TPD(temperature programmed desorption),CV_(2)-TPD,and NH3-TPD.The catalytic effect of oxidation-reduction centers in V_(2)O_(5) is achieved by close contact with the sulfur bond through chemisorption under the effect of acid sites.V_(2)O_(5) is also believed to be the reason for the removal of partial sulfonic acid groups at lower temperatures(445℃).V_(2)O_(5) is an effective catalyst for spent resin pyrolysis and can be further applied in industry.
文摘Self-made cation exchange resin supported nanoscale zero-valent iron （R-nZVI） was used to remove phosphorus in rainwater runoff. 80% of phosphorus in rainwater runoff from grassland was removed with an initial concentration of 0.72 mg. L-1 phosphorus when the dosage of R-nZVl is 8 g per liter rainwater, while only 26% of phosphorus was removed when using cation exchange resin without supported nanoscale zero-valent iron under the same condition. The adsorption capacity of R-nZVI increased up to 185 times of that of the cation exchange resin at a saturated equilibrium phosphorous concentration of 0.42 mg. L-1. Various techniques were implemented to characterize the R-nZVI and explore the mechanism of its removal of phosphate. Scanning electron microscopy （SEM） indicated that new crystal had been formed on the surface of R-nZVI. The result from inductive coupled plasma （ICP） indicated that 2.1% of nZVI was loaded on the support material. The specific surface area was increased after the load of nanoscale zero-valent iron （nZVI）, according to the measurement of BET-N2 method. The result of specific surface area analysis also proved that phosphorus was removed mainly through chemical adsorption process. X-ray photoelectron spectroscopy （XPS） analysis showed that the new product obtained from chemical reaction between phosphate and iron was ferrous phosphate.
基金sponsored by the project of Key Nature Science Foundation of Tianjin(No.043803911)the National Natural Science Foundation of China(Grant No.50473025)Open project of State Key Lab of Heavy Oil(University of petroleum(East China)No.2008-10).
文摘EVAL hollow fiber membrane adsorbents filled with powder D061-type cation exchange resin were prepared through dry-wet spinning process,using hydrophilic copolymer EVAL as the fiber substrate.The microstructures of the membrane adsorbents were observed,and the pure water fluxes,BSA rejection,and static adsorption capacities of membrane adsorbents for BSA were measured.The effect of the resin-filled content on membrane performance has been discussed.The results showed that EVAL hollow fiber membrane adsorbents filled with D061-type cation exchange resins had good adsorption capacity,and the adsorption capacity increased with the quantity of the resin-filled content.The static protein adsorption capacity was 77.14 mg BSA/g membrane adsorbents when D061 resin loading content was 65%at pH 4.5.
基金The Educational Bureau of Hebei Province (Grant No.2007317)Scientific Foundation of Langfang Normal College (Grant No.LS200513)Nankai University Innovation Fund
文摘The performance of adsorption and separation for liensinine, isoliensinine and neferine was studied by double-column adsorption chromatography using macroporous adsorption and cation exchange resins. The alkaloid extract with 49.2% total contents by mass representing 10.6% liensinine, 10.6% isoliensinine and 28.0% neferine respectively was prepared by D72 cation exchange resins, in which most of the impurities were water-soluble alkaloids. Furthermore,the alkaloid extract with 82.6% total contents by mass containing 33.1%, 15.0% and 34.5% of the three adsorbates respectively was prepared by double-column adsorption chromatography using AKS-W macroporous adsorption and D72 cation exchange resins. As a result, the content of single and total alkaloids has been greatly increased by the double-column adsorption chromatography.
基金The University Grants Commission,New Delhi for its funding of this workIndian Institute of Science,Bangalore for its instrumental support+2 种基金Department of Physics,Sri Venkateswara University,Tirupathi,for its assistance in the SEM studyUGC,New Delhi for its support under SAPDST,New Delhi for its support under FIST
文摘2-Acryloxyacetophenone （AAP） was prepared and subjected to suspension polymerization with methyl methacrylate （MMA） using azobisisobutyronitrile （AIBN） as free radical initiator. The differently sulfonated AAP-MMA cross-linked copolymer cationic exchange resins were prepared by sulfonation with concentrated sulphuric acid at 70 ~C. Several characteristics of the prepared resins were evaluated, i.e. FTIR, the ion-exchange capacity （IEC）, thermo gravimetric analysis （TGA）, particle size distribution and microscopic morphology. The resin characteristics were altered with degree of sulfonation, providing that differently sulfonated resins could be prepared. The behavior of atenolol （ATL） loading and in vitro release in the USP stimulated gastric and intestinal fluids of the obtained resins were evaluated. The drug loaded in the resin increased with increasing degree of sulfonation and hence the drug binding site in resin employed. The drug release was lower from the resins with higher content of sulfonic group due to the increase in the diffusive path depth. The drug release was a little lower in stimulated gastric fluid （SGF） than in stimulated intestinal fluids （SIF）. The basic groups, ionized to a little greater extent in SGF and preferred binding with the resin rather than releasing. Hence, the differently sulfonated resins could be utilized as novel carriers for drug delivery.
基金supported by the National Natural Science Foundation of China (No.21477059)the National Water Major Project (No.2015ZX07402-002)+2 种基金the Fundamental Research Funds for the Central Universities (No.15CX02016A)the Tsinghua University Initiative Scientific Research Program (No.20131089247)the open project of State Key Joint Laboratory of environmental simulation and pollution control (Tsinghua University)
文摘N-nitrosodimethylamine（NDMA） precursors consist of a positively charged dimethylamine group and a non-polar moiety, which inspired us to develop a targeted cation exchange technology to remove NDMA precursors. In this study, we tested the removal of two representative NDMA precursors, dimethylamine（DMA） and ranitidine（RNTD）, by strong acidic cation exchange resin. The results showed that pH greatly affected the exchange efficiency, with high removal（DMA 〉 78% and RNTD 〉 94%） observed at pH 〈 pk_a-1 when the molar ratio of exchange capacity to precursor was 4. The exchange order was obtained as follows： Ca^（2＋）〉 Mg^（2＋）〉 RNTD~＋〉 K~＋〉 DMA~＋〉 NH_4~＋〉 Na~＋. The partition coefficient of DMA~＋to Na~＋was 1.41 ± 0.26, while that of RNTD~＋to Na~＋was 12.1 ± 1.9. The pseudo second-order equation fitted the cation exchange kinetics well. Bivalent inorganic cations such as Ca^（2＋）were found to have a notable effect on NA precursor removal in softening column test. Besides DMA and RNTD, cation exchange process also worked well for removing other 7 model NDMA precursors. Overall, NDMA precursor removal can be an added benefit of making use of cation exchange water softening processes.
基金Hunan Provincial Science and Technology Department(2012TP4002-3)Zhangjiajie Science and Technology Bureau(2014YB17)
文摘Objective To explore the optimum condition for complex enzyme-assisted extraction of galanthamine from Lycoris aurea by L_9（3~4） orthogonal array design and separation effect of cation exchange resin on galanthamine. Methods Cellulase and pectinase solution was used as the extraction solvent. The effects of p H value of enzyme, amount of complex enzyme, dissociation time, and enzymatic hydrolysis temperature on the extraction results were investigated. Results The optimal conditions were obtained as follows： ratio of solid to liquid（g：mL） 1：10, pH value 4.5, amount of complex enzymes 4%, enzymatic hydrolysis temperature 50oC, and reaction time 2.0 h. Under these conditions, the extraction yield of galanthamine was 0.0294%. In addition, D-001 cation exchange resin was selected for separation of galanthamine. The separation conditions were that adsorption flow rate was 3 BV/h with reagent of pH2 and the desorption flow rate was 3 BV/h with 70% ethanol solution containing 1.5 mol/L ammonia. After separation, the content of galanthamine was increased to 12.31%. Conclusion The results provide a reference for industrial production of galanthamine.
