Due to their unique features,such as the inherent safety,simplified fuel cycle,and continuous on-line reprocessing,molten salt reactors(MSRs)are regarded as one of the six reference reactors in the Generation IV Inter...Due to their unique features,such as the inherent safety,simplified fuel cycle,and continuous on-line reprocessing,molten salt reactors(MSRs)are regarded as one of the six reference reactors in the Generation IV International Forum(GEN-IV).Molten chloride salt fast reactors(MCFRs)are a type of MSR.Compared to molten fluoride salt reactors(MFSRs),MCFRs have a higher solubility of heavy metal atoms,a harder neutron spectrum,lower accumulation of fission products(FPs),and better breeding and transmutation performance.Thus,MCFRs have been recognized as a type of MSR with great prospects for future development.However,as the most important feature for MSRs,the effect of different reprocessing modes on MCFRs must be researched in depth.As such,this study investigated the effect of different isotopes,especially FPs,on the neutronic performance of an MCFR,such as its breeding performance.Furthermore,the characteristics of the different reprocessing modes and MCFR rates were analyzed in terms of safety,radioactivity level,neutron economy,and breeding capacity.In the end,a reprocessing method suitable for MCFRs was determined through calculation and analysis,which provides a reference for the further research of MCFRs.展开更多
Low grade magnesite is one of the main research directions in the future as the raw material for the preparation of magnesia based insulating refractories.Periclase-forsterite(MgO-Mg_(2)SiO_(4)) lightweight insulating...Low grade magnesite is one of the main research directions in the future as the raw material for the preparation of magnesia based insulating refractories.Periclase-forsterite(MgO-Mg_(2)SiO_(4)) lightweight insulating refractories were prepared by the molten salt method with high silica magnesite and tertiary talc ore as raw materials by pretreating them to get light burnt magnesia and talc,and NaCl molten salt as the reaction medium.The effects of the NaCl addition,the sintering temperature,the holding time and the raw material ratio on the sample preparation were studied.The results show that when the NaCl addition is 20% of the mass of light burnt magnesia and talc mixture,the sintering temperature is 1 200 ℃,the holding time is 6 h,and m(light burnt magnesia):m(talc)=5:5,the sample has the optimal comprehensive properties:the bulk density of 1.46 g·cm^(-3) and the apparent porosity of 55.0%.In addition,it is found that self-decomposition of talc and the formation of forsterite can form pores inside the sample.展开更多
The oxidative reaction between lanthanum trichloride and oxide ion was studied in the molten LiCl-KCl eutectic at 773 K by in-situ Raman spectroscopy using an yttria-stabilized zirconia electrode in conjunction with e...The oxidative reaction between lanthanum trichloride and oxide ion was studied in the molten LiCl-KCl eutectic at 773 K by in-situ Raman spectroscopy using an yttria-stabilized zirconia electrode in conjunction with electrochemical methods.The formation of lanthanum oxychloride,LaOCl(s),was confirmed by studying the vibrational properties of crystalline LaOCl and X-ray diffraction analysis.The solubility product of LaOCl in the LiCl-KCl molten eutectic at 773 K is found to be pKsp(LaOCl)=7.569±0.100,by combining the results of Raman spectroscopy and potentiometric titration with the addition of barium oxide.The use of Raman spectroscopic quantitation of dissolved lanthanum ions in the system allows faster and more accurate determination of the stable phase of lanthanum as well as the solubility product of LaOCl compared with that measured by potentiometric titration only.Based on experimentally obtained pKsp and standard equilibrium potentials,the potentialpO2- phase diagram of lanthanum in the molten LiCl-KCl eutectic was reported.展开更多
基金supported by the Chinese TMSR Strategic Pioneer Science and Technology Project (No.XDA02010000)the Frontier Science Key Program of Chinese Academy of Sciences (No.QYZDY-SSW-JSC016)the Shanghai Sailing Program (No.20YF1457600).
文摘Due to their unique features,such as the inherent safety,simplified fuel cycle,and continuous on-line reprocessing,molten salt reactors(MSRs)are regarded as one of the six reference reactors in the Generation IV International Forum(GEN-IV).Molten chloride salt fast reactors(MCFRs)are a type of MSR.Compared to molten fluoride salt reactors(MFSRs),MCFRs have a higher solubility of heavy metal atoms,a harder neutron spectrum,lower accumulation of fission products(FPs),and better breeding and transmutation performance.Thus,MCFRs have been recognized as a type of MSR with great prospects for future development.However,as the most important feature for MSRs,the effect of different reprocessing modes on MCFRs must be researched in depth.As such,this study investigated the effect of different isotopes,especially FPs,on the neutronic performance of an MCFR,such as its breeding performance.Furthermore,the characteristics of the different reprocessing modes and MCFR rates were analyzed in terms of safety,radioactivity level,neutron economy,and breeding capacity.In the end,a reprocessing method suitable for MCFRs was determined through calculation and analysis,which provides a reference for the further research of MCFRs.
文摘Low grade magnesite is one of the main research directions in the future as the raw material for the preparation of magnesia based insulating refractories.Periclase-forsterite(MgO-Mg_(2)SiO_(4)) lightweight insulating refractories were prepared by the molten salt method with high silica magnesite and tertiary talc ore as raw materials by pretreating them to get light burnt magnesia and talc,and NaCl molten salt as the reaction medium.The effects of the NaCl addition,the sintering temperature,the holding time and the raw material ratio on the sample preparation were studied.The results show that when the NaCl addition is 20% of the mass of light burnt magnesia and talc mixture,the sintering temperature is 1 200 ℃,the holding time is 6 h,and m(light burnt magnesia):m(talc)=5:5,the sample has the optimal comprehensive properties:the bulk density of 1.46 g·cm^(-3) and the apparent porosity of 55.0%.In addition,it is found that self-decomposition of talc and the formation of forsterite can form pores inside the sample.
基金Project supported by the National Research Foundation of Korea(NRF)grant funded by the Korea government(NRF-2017M2A8A5014801,NRF-2016M2B2B1945252)。
文摘The oxidative reaction between lanthanum trichloride and oxide ion was studied in the molten LiCl-KCl eutectic at 773 K by in-situ Raman spectroscopy using an yttria-stabilized zirconia electrode in conjunction with electrochemical methods.The formation of lanthanum oxychloride,LaOCl(s),was confirmed by studying the vibrational properties of crystalline LaOCl and X-ray diffraction analysis.The solubility product of LaOCl in the LiCl-KCl molten eutectic at 773 K is found to be pKsp(LaOCl)=7.569±0.100,by combining the results of Raman spectroscopy and potentiometric titration with the addition of barium oxide.The use of Raman spectroscopic quantitation of dissolved lanthanum ions in the system allows faster and more accurate determination of the stable phase of lanthanum as well as the solubility product of LaOCl compared with that measured by potentiometric titration only.Based on experimentally obtained pKsp and standard equilibrium potentials,the potentialpO2- phase diagram of lanthanum in the molten LiCl-KCl eutectic was reported.
