Various different objects have been reported to strangulate the penis,We reported on a patient who used metal radiator clamps for an extended period of time .Workup included history,physical examination and urinalysis...Various different objects have been reported to strangulate the penis,We reported on a patient who used metal radiator clamps for an extended period of time .Workup included history,physical examination and urinalysis.The patient was taken to the operating room for further evaluation with cystourethroscopy and orthopedic wire cutters were used to break the metal bands.（Asian J Androl 2006Jan;8：105-106）展开更多
A few years ago, the present author had the opportunity to study the iron clamps of the archaic and classical temples. This research led to very interesting results concerning the development of technology applied in ...A few years ago, the present author had the opportunity to study the iron clamps of the archaic and classical temples. This research led to very interesting results concerning the development of technology applied in making those clamps and what is more its rapid evolution in a very short period. For instance, the technology in making the clamps of Parthenon and those of the Epikourios Apollo differs completely, although the latter was erected by the same engineer, Iktinos. Actually, it is a revolutionary one as compared with that applied in the erection of Parthenon. The paper starts by examining the making of the archaic Trapeza iron clamps and continue with those of the Parthenon and the Epikourios Apollo.展开更多
Based on 2-D device simulations and mixed-mode transient simulations, DC and transient discharge characteristics of a usual diode string utilizing a standard CMOS process, and a diode string utilizing a triple-well CM...Based on 2-D device simulations and mixed-mode transient simulations, DC and transient discharge characteristics of a usual diode string utilizing a standard CMOS process, and a diode string utilizing a triple-well CMOS process, which can serve as an essential VDD-VSS clamp device for CMOS input ESD protection were compared. Transient discharge characteristics including peak voltages developed across gates oxides of transistors in input buffers, lattice heating inside ESD protection devices, and ratios of discharge current components at its peak inside the diode-string clamp were compared. DC standby current levels added per each input pad structure, which are the critical parameters determining usefulness of the devices, were also compared. We showed that the diode-string devices in comparison can serve successfully as a VDD-VSS clamp device for ESD protection by virtue of the dominant pnpn thyristor-related conduction mechanisms. Optimization of design parameters including anode-cathode contact spacing in each diode in the string, device width of the diode string, and number of diodes in the diode string was performed to present transient discharge and DC characteristics of some recommendable design examples, which can serve as a guideline in designing diode-string clamp devices.展开更多
To the Editor:Preeclampsia presents with new-onset hypertension and maternal multi-organ injury that is associated with substantial maternal and fetal morbidity and mortality.[1]Although the etiology remains a mystery...To the Editor:Preeclampsia presents with new-onset hypertension and maternal multi-organ injury that is associated with substantial maternal and fetal morbidity and mortality.[1]Although the etiology remains a mystery,environmental toxicants,especially those that interact with genetic factors and disrupt normal placental function,are emerging as potential risk factors for preeclampsia.展开更多
The cubic stiffness force model(CSFM)and Bouc-Wen model(BWM)are introduced and compared innovatively.The unknown coefficients of the nonlinear models are identified by the genetic algorithm combined with experiments.B...The cubic stiffness force model(CSFM)and Bouc-Wen model(BWM)are introduced and compared innovatively.The unknown coefficients of the nonlinear models are identified by the genetic algorithm combined with experiments.By fitting the identified nonlinear coefficients under different excitation amplitudes,the nonlinear vibration responses of the system are predicted.The results show that the accuracy of the BWM is higher than that of the CSFM,especially in the non-resonant region.However,the optimization time of the BWM is longer than that of the CSFM.展开更多
At the EAST tokamak, the ion temperature(T_(i)) is observed to be clamped around 1.25 keV in electron cyclotron resonance(ECR)-heated plasmas, even at core electron temperatures up to 10 keV(depending on the ECR heati...At the EAST tokamak, the ion temperature(T_(i)) is observed to be clamped around 1.25 keV in electron cyclotron resonance(ECR)-heated plasmas, even at core electron temperatures up to 10 keV(depending on the ECR heating power and the plasma density). This clamping results from the lack of direct ion heating and high levels of turbulence-driven transport. Turbulent transport analysis shows that trapped electron mode and electron temperature gradient-driven modes are the most unstable modes in the core of ECR-heated H-mode plasmas. Nevertheless, recently it was found that the T_(i)/T_(e)ratio can increase further with the fraction of the neutral beam injection(NBI) power, which leads to a higher core ion temperature(Ti0). In NBI heating-dominant H-mode plasmas, the ion temperature gradient-driven modes become the most unstable modes.Furthermore, a strong and broad internal transport barrier(ITB) can form at the plasma core in high-power NBI-heated H-mode plasmas when the T_(i)/T_(e)ratio approaches ~1, which results in steep core Teand Tiprofiles, as well as a peaked neprofile. Power balance analysis shows a weaker Teprofile stiffness after the formation of ITBs in the core plasma region, where Ticlamping is broken,and the core Tican increase further above 2 keV, which is 80% higher than the value of Ticlamping in ECR-heated plasmas. This finding proposes a possible solution to the problem of Ticlamping on EAST and demonstrates an advanced operational regime with the formation of a strong and broad ITB for future fusion plasmas dominated by electron heating.展开更多
Objective:A novel technique was explored using an airbag-selective portal vein blood arrester that circumvents the need for an intraoperative assessment of anatomical variations in patients with complex intrahepatic s...Objective:A novel technique was explored using an airbag-selective portal vein blood arrester that circumvents the need for an intraoperative assessment of anatomical variations in patients with complex intrahepatic space-occupying lesions.Methods:Rabbits undergoing hepatectomy were randomly assigned to 4 groups:intermittent portal triad clamping(PTC),intermittent portal vein clamping(PVC),intermittent portal vein blocker with an airbag-selective portal vein blood arrester(APC),and without portal blood occlusion(control).Hepatic ischemia and reperfusion injury were assessed by measuring the 7-day survival rate,blood loss,liver function,hepatic pathology,hepatic inflammatory cytokine infiltration,hepatic malondialdehyde levels,and proliferating cell nuclear antigen levels.Results:Liver damage was substantially reduced in the APC and PVC groups.The APC animals exhibited transaminase levels similar to or less oxidative stress damage and inflammatory hepatocellular injury compared to those exhibited by the PVC animals.Bleeding was significantly higher in the control group than in the other groups.The APC group had less bleeding than the PVC group because of the avoidance of portal vein skeletonization during hepatectomy.Thus,more operative time was saved in the APC group than in the PVC group.Moreover,the total 7-day survival rate in the APC group was higher than that in the PTC group.Conclusion:Airbag-selective portal vein blood arresters may help protect against hepatic ischemia and reperfusion injury in rabbits undergoing partial hepatectomy.This technique may also help prevent liver damage in patients requiring hepatectomy.展开更多
Significant advances in surgical techniques and relevant medium-and long-term outcomes over the past two decades have led to a substantial expansion in the indications for major liver resections.To support these outst...Significant advances in surgical techniques and relevant medium-and long-term outcomes over the past two decades have led to a substantial expansion in the indications for major liver resections.To support these outstanding results and to reduce perioperative complications,anesthesiologists must address and master key perioperative issues(preoperative assessment,proactive intraoperative anesthesia strategies,and implementation of the Enhanced Recovery After Surgery approach).Intensive care unit monitoring immediately following liver surgery remains a subject of active and often unresolved debate.Among postoperative complications,posthepatectomy liver failure(PHLF)occurs in different grades of severity(A-C)and frequency(9%-30%),and it is the main cause of 90-d postoperative mortality.PHLF,recently redefined with pragmatic clinical criteria and perioperative scores,can be predicted,prevented,or anticipated.This review highlights:(1)The systemic consequences of surgical manipulations anesthesiologistsmust respond to or prevent,to positively impact PHLF(a proactive approach);and(2)the maximal intensivetreatment of PHLF,including artificial options,mainly based,so far,on Acute Liver Failure treatment(s),to buytime waiting for the recovery of the native liver or,when appropriate and in very selected cases,toward livertransplant.Such a clinical context requires a strong commitment to surgeons,anesthesiologists,and intensivists towork together,for a fruitful collaboration in a mandatory clinical continuum.展开更多
There exists a lot of research on the nonlinear vibration of the pipeline system with different boundary conditions.To the best of our knowledge,little research on the actual constraint of the clamp has been performed...There exists a lot of research on the nonlinear vibration of the pipeline system with different boundary conditions.To the best of our knowledge,little research on the actual constraint of the clamp has been performed.In this paper,according to hysteresis loops of the clamp obtained from experimental test,the simplified bilinear stiffness and damping model is proposed.Then the Finite Element(FE)model of L-type pipeline system with clamps is established using Timoshenko beam theory in combination with aforementioned stiffness-damping model.Both hammering and shaker tests verify the FE model via the comparisons of natural frequencies and vibration responses.The results show that the maximum errors of natural frequencies and vibration responses are about 8.31%and 17.6%,respectively.The proposed model can simulate the dynamic characteristics of the L-type pipeline system with clamps well,which is helpful to provide some guidance for the early design stage of pipeline in aero-engine.展开更多
The violent vibration of hydraulic pipelines in aircraft may cause faults or even an accident,especially for the large aircraft with the multi-pump system because of different vibration sources and complex pipelines s...The violent vibration of hydraulic pipelines in aircraft may cause faults or even an accident,especially for the large aircraft with the multi-pump system because of different vibration sources and complex pipelines system.Aiming to the vibration analysis and control of the multipump system,this paper proposed the clamps’locations optimization to minimize the system impedance at vibration frequencies.Firstly,the models of the flexible clamp and other components in multi-pump system were established,based on which,the system impedance was calculated by using Transfer Matrix Method(TMM);Secondly,the objective function is defined as weighted sum of system impedance at frequencies of different vibration sources.Then,the clamps’locations were altered to change the system impedance.Moreover,The Chaotic Swarm Particle Optimization(CPSO)algorithm was applied to obtain the optimal clamps’locations and the minimum value of objective function which decreased by 36.4%compared to the value of original clamps’locations;Finally,the experiments from vibration and pressure test with original and optimized clamps’locations verified the effectiveness of the system impedance calculation and clamps’locations optimization method.展开更多
CD81 is a widely expressed transmembrane protein that provides a scaffold for signaling molecules and orchestrates interactions among membrane-associated proteins to initiate signaling cascades related to cell migrati...CD81 is a widely expressed transmembrane protein that provides a scaffold for signaling molecules and orchestrates interactions among membrane-associated proteins to initiate signaling cascades related to cell migration,adhesion,and fusion1.CD81 exerts a wide range of regulatory effects on immune cells.In B cells,CD81 facilitates the assembly of CD19-CR2/CD21 and B-cell receptor complexes at tetraspanin-enriched signaling microdomains,lowering the threshold dose of antigen required to trigger B-cell clonal expansion and antibody production.展开更多
Corrosion is a primary cause of the slippage of friction⁃type high⁃strength bolted(FHSB)T⁃stub connections.This paper attempts to quantify the residual capacity of FHSB T⁃stub connections with corroded nuts.Firstly,co...Corrosion is a primary cause of the slippage of friction⁃type high⁃strength bolted(FHSB)T⁃stub connections.This paper attempts to quantify the residual capacity of FHSB T⁃stub connections with corroded nuts.Firstly,corrosion simulation tests were conducted on 48 manually cut nuts to find out the relationship between the damage degree of nut section and the residual clamping force(RCF)of bolt.Then,static load tests were carried out on 24 FHSB T⁃stub connections with nuts of different degrees of damage to obtain the failure modes.By finite⁃element(FE)models,a comparative analysis was performed on the initial friction load(IFL)and ultimate strength(US)of each connection with corroded nuts.Finally,the parameters of 96 FE models for FHSB T⁃stub connections were analyzed and used to derive the calculation formulas for the degree of damage for each nut and the IFL and US of each connection.The results show that the RCF decay of a bolt is a quadratic function of the equivalent radius loss ratio and the shear failure after nut corrosion;the IFL of each connection had a clear linear correlation with the RCF of the corresponding bolts,and the correlation depends on the applied load and static friction on connecting plate interface induced by the clamping force;the static friction had little impact on the US of the connection;the proposed IFL and US formulas can effectively derive the residual anti⁃slip capacity of FHSB T⁃stub connections from the degree of damage of the corroded nut section.The research results provide a scientific basis for the replacement and maintenance of corroded bolts of FHSB T⁃stub connections.展开更多
The 3Φinduction motor is a broadly used electric machine in industrial applications,which plays a vital role in industries because of having plenty of beneficial impacts like low cost and easiness but the problems lik...The 3Φinduction motor is a broadly used electric machine in industrial applications,which plays a vital role in industries because of having plenty of beneficial impacts like low cost and easiness but the problems like decrease in motor speed due to load,high consumption of current and high ripple occurrence of ripples have reduced its preferences.The ultimate objective of this study is to control change in motor speed due to load variations.An improved Trans Z Source Inverter(ΓZSI)with a clamping diode is employed to maintain constant input voltage,reduce ripples and voltage overshoot.To operate induction motor at rated speed,different controllers are used.The conventional Proportional-Inte-gral(PI)controller suffers from high settling time and maximum peak overshoot.To overcome these limitations,Fractional Order Proportional Integral Derivative(FOPID)controller optimized by Gray Wolf Optimization(GWO)technique is employed to provide better performance by eliminating maximum peak overshoot pro-blems.The proposed speed controller provides good dynamic response and controls the induction motor more effectively.The complete setup is implemented in MATLAB Simulation to verify the simulation results.The proposed approach provides optimal performance with high torque and speed along with less steady state error.展开更多
The authors used suspension cells of Populus euphratica to isolate protoplast in the present study. Protoplasts were successfully obtained after 4 hours incubation in enzyme solution containing 1 0% cellulase “o...The authors used suspension cells of Populus euphratica to isolate protoplast in the present study. Protoplasts were successfully obtained after 4 hours incubation in enzyme solution containing 1 0% cellulase “onozuka” R\|10, 0\^01% pectolyase Y\|23,0\^15% macerozyme R\|10 and 0\^1% hemicellulase at 25℃. Outward and inward single channels in plasma membrane were observed using cell\|attached recording of patch\|clamp technique. In this study, single channel records showed that more than one species of channel were obtained. These attempts in protoplast isolation and ion channel recording offers the opportunity to characterize cellular mechanisms of salt tolerance in tree species.展开更多
Using patch clamp whole cell recording techiques, we examined the effects ofIQ_23, a benzyl-isoquinoline derivative with antiarrhythmic activities, on the action potential (AP) andpotassium currents in single guinea p...Using patch clamp whole cell recording techiques, we examined the effects ofIQ_23, a benzyl-isoquinoline derivative with antiarrhythmic activities, on the action potential (AP) andpotassium currents in single guinea pig ventricular myocytes. The results showed that IQ_23 at 10, 30and 100 μmol ·L_-1 slowed the repolarization in AP dose-dependently. The APD_90 were prolonged by15%, 28% and 31% respectively. This effect did not depend on the extracellular Ca^2+. In voltageclamp mode, IQ_23 effectively blocked both the components of the delayed rectifier potassium current(I_k), i.e., I_ks and I_kr. At concentrations of 30 and 100 μmol· L^-1, IQ_23 suppressed I_ks by 21% and 26%and suppressed I_kr by 67% and 86% respectively. But even at 100 μmol·L^-1, IQ_23 had little effect onthe inward rectifier potassium current (I_k1). It is concluded: 1. IQ_23 can dose-dependently prolongAPD in the ventriculas myocytes of guinea pig, the effect does not depend on the extracellular Ca^2+; 2.IQ_23 blocks both I_ks and Ikr in the ventricular myocytes without obvious specificities between them.展开更多
A new combined soft switching technique and a novel topology of aeronautical static inverter with high frequency pulse dc link are proposed in this paper, namely an electrical isolated converter can realize soft swi...A new combined soft switching technique and a novel topology of aeronautical static inverter with high frequency pulse dc link are proposed in this paper, namely an electrical isolated converter can realize soft switching of two stage cascade converters. It lays technical foundation for high power density, high efficiency and low cost aeronautical static inverter. The operation and design approach of this topology are carefully analyzed and studied. The validity of this topology is verified by simulation and test.展开更多
文摘Various different objects have been reported to strangulate the penis,We reported on a patient who used metal radiator clamps for an extended period of time .Workup included history,physical examination and urinalysis.The patient was taken to the operating room for further evaluation with cystourethroscopy and orthopedic wire cutters were used to break the metal bands.（Asian J Androl 2006Jan;8：105-106）
文摘A few years ago, the present author had the opportunity to study the iron clamps of the archaic and classical temples. This research led to very interesting results concerning the development of technology applied in making those clamps and what is more its rapid evolution in a very short period. For instance, the technology in making the clamps of Parthenon and those of the Epikourios Apollo differs completely, although the latter was erected by the same engineer, Iktinos. Actually, it is a revolutionary one as compared with that applied in the erection of Parthenon. The paper starts by examining the making of the archaic Trapeza iron clamps and continue with those of the Parthenon and the Epikourios Apollo.
文摘Based on 2-D device simulations and mixed-mode transient simulations, DC and transient discharge characteristics of a usual diode string utilizing a standard CMOS process, and a diode string utilizing a triple-well CMOS process, which can serve as an essential VDD-VSS clamp device for CMOS input ESD protection were compared. Transient discharge characteristics including peak voltages developed across gates oxides of transistors in input buffers, lattice heating inside ESD protection devices, and ratios of discharge current components at its peak inside the diode-string clamp were compared. DC standby current levels added per each input pad structure, which are the critical parameters determining usefulness of the devices, were also compared. We showed that the diode-string devices in comparison can serve successfully as a VDD-VSS clamp device for ESD protection by virtue of the dominant pnpn thyristor-related conduction mechanisms. Optimization of design parameters including anode-cathode contact spacing in each diode in the string, device width of the diode string, and number of diodes in the diode string was performed to present transient discharge and DC characteristics of some recommendable design examples, which can serve as a guideline in designing diode-string clamp devices.
基金National Science Fund of China(81200449)the National Science Fund of Shanghai,China(12ZR1403700)
文摘To the Editor:Preeclampsia presents with new-onset hypertension and maternal multi-organ injury that is associated with substantial maternal and fetal morbidity and mortality.[1]Although the etiology remains a mystery,environmental toxicants,especially those that interact with genetic factors and disrupt normal placental function,are emerging as potential risk factors for preeclampsia.
文摘The cubic stiffness force model(CSFM)and Bouc-Wen model(BWM)are introduced and compared innovatively.The unknown coefficients of the nonlinear models are identified by the genetic algorithm combined with experiments.By fitting the identified nonlinear coefficients under different excitation amplitudes,the nonlinear vibration responses of the system are predicted.The results show that the accuracy of the BWM is higher than that of the CSFM,especially in the non-resonant region.However,the optimization time of the BWM is longer than that of the CSFM.
基金supported by National Natural Science Foundation of China(No.12135015)the Users with Excellence Program of Hefei Science Center,CAS(No.2021HSCUE012)+3 种基金the National Key R&D Program of China(No.2022Y FE03010003)the Major Science and Technology Infrastructure Maintenance and Reconstruction Projects of the Chinese Academy of Sciences 2021the Special Funds for Improving Conditions for Scientific Research in National Scientific Institutions 2022the China Scholarship Council。
文摘At the EAST tokamak, the ion temperature(T_(i)) is observed to be clamped around 1.25 keV in electron cyclotron resonance(ECR)-heated plasmas, even at core electron temperatures up to 10 keV(depending on the ECR heating power and the plasma density). This clamping results from the lack of direct ion heating and high levels of turbulence-driven transport. Turbulent transport analysis shows that trapped electron mode and electron temperature gradient-driven modes are the most unstable modes in the core of ECR-heated H-mode plasmas. Nevertheless, recently it was found that the T_(i)/T_(e)ratio can increase further with the fraction of the neutral beam injection(NBI) power, which leads to a higher core ion temperature(Ti0). In NBI heating-dominant H-mode plasmas, the ion temperature gradient-driven modes become the most unstable modes.Furthermore, a strong and broad internal transport barrier(ITB) can form at the plasma core in high-power NBI-heated H-mode plasmas when the T_(i)/T_(e)ratio approaches ~1, which results in steep core Teand Tiprofiles, as well as a peaked neprofile. Power balance analysis shows a weaker Teprofile stiffness after the formation of ITBs in the core plasma region, where Ticlamping is broken,and the core Tican increase further above 2 keV, which is 80% higher than the value of Ticlamping in ECR-heated plasmas. This finding proposes a possible solution to the problem of Ticlamping on EAST and demonstrates an advanced operational regime with the formation of a strong and broad ITB for future fusion plasmas dominated by electron heating.
基金supported by the Hainan Provincial Natural Science Foundation of China(No.821QN0982 and No.2019RC373)。
文摘Objective:A novel technique was explored using an airbag-selective portal vein blood arrester that circumvents the need for an intraoperative assessment of anatomical variations in patients with complex intrahepatic space-occupying lesions.Methods:Rabbits undergoing hepatectomy were randomly assigned to 4 groups:intermittent portal triad clamping(PTC),intermittent portal vein clamping(PVC),intermittent portal vein blocker with an airbag-selective portal vein blood arrester(APC),and without portal blood occlusion(control).Hepatic ischemia and reperfusion injury were assessed by measuring the 7-day survival rate,blood loss,liver function,hepatic pathology,hepatic inflammatory cytokine infiltration,hepatic malondialdehyde levels,and proliferating cell nuclear antigen levels.Results:Liver damage was substantially reduced in the APC and PVC groups.The APC animals exhibited transaminase levels similar to or less oxidative stress damage and inflammatory hepatocellular injury compared to those exhibited by the PVC animals.Bleeding was significantly higher in the control group than in the other groups.The APC group had less bleeding than the PVC group because of the avoidance of portal vein skeletonization during hepatectomy.Thus,more operative time was saved in the APC group than in the PVC group.Moreover,the total 7-day survival rate in the APC group was higher than that in the PTC group.Conclusion:Airbag-selective portal vein blood arresters may help protect against hepatic ischemia and reperfusion injury in rabbits undergoing partial hepatectomy.This technique may also help prevent liver damage in patients requiring hepatectomy.
文摘Significant advances in surgical techniques and relevant medium-and long-term outcomes over the past two decades have led to a substantial expansion in the indications for major liver resections.To support these outstanding results and to reduce perioperative complications,anesthesiologists must address and master key perioperative issues(preoperative assessment,proactive intraoperative anesthesia strategies,and implementation of the Enhanced Recovery After Surgery approach).Intensive care unit monitoring immediately following liver surgery remains a subject of active and often unresolved debate.Among postoperative complications,posthepatectomy liver failure(PHLF)occurs in different grades of severity(A-C)and frequency(9%-30%),and it is the main cause of 90-d postoperative mortality.PHLF,recently redefined with pragmatic clinical criteria and perioperative scores,can be predicted,prevented,or anticipated.This review highlights:(1)The systemic consequences of surgical manipulations anesthesiologistsmust respond to or prevent,to positively impact PHLF(a proactive approach);and(2)the maximal intensivetreatment of PHLF,including artificial options,mainly based,so far,on Acute Liver Failure treatment(s),to buytime waiting for the recovery of the native liver or,when appropriate and in very selected cases,toward livertransplant.Such a clinical context requires a strong commitment to surgeons,anesthesiologists,and intensivists towork together,for a fruitful collaboration in a mandatory clinical continuum.
基金supported by National Natural Science Foundation of China(No.11772089)Fundamental Research Funds for the Central Universities(Nos.N170308028,N170306004 and N180708009)Program for the Innovative Talents of Higher Learning Institutions of Liaoning(LR2017035)。
文摘There exists a lot of research on the nonlinear vibration of the pipeline system with different boundary conditions.To the best of our knowledge,little research on the actual constraint of the clamp has been performed.In this paper,according to hysteresis loops of the clamp obtained from experimental test,the simplified bilinear stiffness and damping model is proposed.Then the Finite Element(FE)model of L-type pipeline system with clamps is established using Timoshenko beam theory in combination with aforementioned stiffness-damping model.Both hammering and shaker tests verify the FE model via the comparisons of natural frequencies and vibration responses.The results show that the maximum errors of natural frequencies and vibration responses are about 8.31%and 17.6%,respectively.The proposed model can simulate the dynamic characteristics of the L-type pipeline system with clamps well,which is helpful to provide some guidance for the early design stage of pipeline in aero-engine.
基金supported by the National Natural Science Foundation of China (No. 51775004)
文摘The violent vibration of hydraulic pipelines in aircraft may cause faults or even an accident,especially for the large aircraft with the multi-pump system because of different vibration sources and complex pipelines system.Aiming to the vibration analysis and control of the multipump system,this paper proposed the clamps’locations optimization to minimize the system impedance at vibration frequencies.Firstly,the models of the flexible clamp and other components in multi-pump system were established,based on which,the system impedance was calculated by using Transfer Matrix Method(TMM);Secondly,the objective function is defined as weighted sum of system impedance at frequencies of different vibration sources.Then,the clamps’locations were altered to change the system impedance.Moreover,The Chaotic Swarm Particle Optimization(CPSO)algorithm was applied to obtain the optimal clamps’locations and the minimum value of objective function which decreased by 36.4%compared to the value of original clamps’locations;Finally,the experiments from vibration and pressure test with original and optimized clamps’locations verified the effectiveness of the system impedance calculation and clamps’locations optimization method.
基金This study was supported by grants from the National Key R&D Program of China(2018YFC1004404)National Natural Science Foundation of China(81771526).
文摘CD81 is a widely expressed transmembrane protein that provides a scaffold for signaling molecules and orchestrates interactions among membrane-associated proteins to initiate signaling cascades related to cell migration,adhesion,and fusion1.CD81 exerts a wide range of regulatory effects on immune cells.In B cells,CD81 facilitates the assembly of CD19-CR2/CD21 and B-cell receptor complexes at tetraspanin-enriched signaling microdomains,lowering the threshold dose of antigen required to trigger B-cell clonal expansion and antibody production.
文摘Corrosion is a primary cause of the slippage of friction⁃type high⁃strength bolted(FHSB)T⁃stub connections.This paper attempts to quantify the residual capacity of FHSB T⁃stub connections with corroded nuts.Firstly,corrosion simulation tests were conducted on 48 manually cut nuts to find out the relationship between the damage degree of nut section and the residual clamping force(RCF)of bolt.Then,static load tests were carried out on 24 FHSB T⁃stub connections with nuts of different degrees of damage to obtain the failure modes.By finite⁃element(FE)models,a comparative analysis was performed on the initial friction load(IFL)and ultimate strength(US)of each connection with corroded nuts.Finally,the parameters of 96 FE models for FHSB T⁃stub connections were analyzed and used to derive the calculation formulas for the degree of damage for each nut and the IFL and US of each connection.The results show that the RCF decay of a bolt is a quadratic function of the equivalent radius loss ratio and the shear failure after nut corrosion;the IFL of each connection had a clear linear correlation with the RCF of the corresponding bolts,and the correlation depends on the applied load and static friction on connecting plate interface induced by the clamping force;the static friction had little impact on the US of the connection;the proposed IFL and US formulas can effectively derive the residual anti⁃slip capacity of FHSB T⁃stub connections from the degree of damage of the corroded nut section.The research results provide a scientific basis for the replacement and maintenance of corroded bolts of FHSB T⁃stub connections.
文摘The 3Φinduction motor is a broadly used electric machine in industrial applications,which plays a vital role in industries because of having plenty of beneficial impacts like low cost and easiness but the problems like decrease in motor speed due to load,high consumption of current and high ripple occurrence of ripples have reduced its preferences.The ultimate objective of this study is to control change in motor speed due to load variations.An improved Trans Z Source Inverter(ΓZSI)with a clamping diode is employed to maintain constant input voltage,reduce ripples and voltage overshoot.To operate induction motor at rated speed,different controllers are used.The conventional Proportional-Inte-gral(PI)controller suffers from high settling time and maximum peak overshoot.To overcome these limitations,Fractional Order Proportional Integral Derivative(FOPID)controller optimized by Gray Wolf Optimization(GWO)technique is employed to provide better performance by eliminating maximum peak overshoot pro-blems.The proposed speed controller provides good dynamic response and controls the induction motor more effectively.The complete setup is implemented in MATLAB Simulation to verify the simulation results.The proposed approach provides optimal performance with high torque and speed along with less steady state error.
文摘The authors used suspension cells of Populus euphratica to isolate protoplast in the present study. Protoplasts were successfully obtained after 4 hours incubation in enzyme solution containing 1 0% cellulase “onozuka” R\|10, 0\^01% pectolyase Y\|23,0\^15% macerozyme R\|10 and 0\^1% hemicellulase at 25℃. Outward and inward single channels in plasma membrane were observed using cell\|attached recording of patch\|clamp technique. In this study, single channel records showed that more than one species of channel were obtained. These attempts in protoplast isolation and ion channel recording offers the opportunity to characterize cellular mechanisms of salt tolerance in tree species.
文摘Using patch clamp whole cell recording techiques, we examined the effects ofIQ_23, a benzyl-isoquinoline derivative with antiarrhythmic activities, on the action potential (AP) andpotassium currents in single guinea pig ventricular myocytes. The results showed that IQ_23 at 10, 30and 100 μmol ·L_-1 slowed the repolarization in AP dose-dependently. The APD_90 were prolonged by15%, 28% and 31% respectively. This effect did not depend on the extracellular Ca^2+. In voltageclamp mode, IQ_23 effectively blocked both the components of the delayed rectifier potassium current(I_k), i.e., I_ks and I_kr. At concentrations of 30 and 100 μmol· L^-1, IQ_23 suppressed I_ks by 21% and 26%and suppressed I_kr by 67% and 86% respectively. But even at 100 μmol·L^-1, IQ_23 had little effect onthe inward rectifier potassium current (I_k1). It is concluded: 1. IQ_23 can dose-dependently prolongAPD in the ventriculas myocytes of guinea pig, the effect does not depend on the extracellular Ca^2+; 2.IQ_23 blocks both I_ks and Ikr in the ventricular myocytes without obvious specificities between them.
文摘A new combined soft switching technique and a novel topology of aeronautical static inverter with high frequency pulse dc link are proposed in this paper, namely an electrical isolated converter can realize soft switching of two stage cascade converters. It lays technical foundation for high power density, high efficiency and low cost aeronautical static inverter. The operation and design approach of this topology are carefully analyzed and studied. The validity of this topology is verified by simulation and test.
