To solve the problem of only surface carbonation and realize high-efficiency carbonation of recycled coarse aggregate,the method of carbonated recycled coarse aggregate with nano materials pre-soaking was first put fo...To solve the problem of only surface carbonation and realize high-efficiency carbonation of recycled coarse aggregate,the method of carbonated recycled coarse aggregate with nano materials pre-soaking was first put forward.The carbonation effect of modified recycled coarse aggregate with three different carbonation methods was evaluated,and water absorption,apparent density and crush index of modified recycled coarse aggregate were measured.Combined with XRD,SEM,and MIP microscopic analysis,the high-efficiency carbonation strengthening mechanism of modified recycled coarse aggregate was revealed.The experimental results show that,compared with the non-carbonated recycled coarse aggregate,the physical and microscopic properties of carbonated recycled coarse aggregate are improved.The method of carbonation with nano-SiO_(2) pre-soaking can realize the high-efficiency carbonation of recycled coarse aggregate,for modified recycled coarse aggregate with the method,water absorption is reduced by 23.03%,porosity is reduced by 44.06%,and the average pore diameter is 21.82 nm.The high-efficiency carbonation strengthening mechanism show that the pre-socked nano-SiO_(2) is bound to the hydration product Ca(OH)_(2) of the old mortar with nano-scale C-S-H,which can improve the CO_(2) absorption rate,accelerate the carbonation reaction,generate more stable CaCO_(3) and nano-scale silica gel,and bond to the dense three-dimensional network structure to realize the bidirectional enhancement of nano-materials and pressurized carbonation.It is concluded that the method of carbonation with nano-SiO_(2) pre-soaking is a novel high-efficiency carbonation modification of recycled coarse aggregate.展开更多
With the emphasis on environmental issues,the recycling of waste concrete,even recycled concrete,has become a hot spot in the field of architecture.But the repeated recycling of waste concrete used in harsh environmen...With the emphasis on environmental issues,the recycling of waste concrete,even recycled concrete,has become a hot spot in the field of architecture.But the repeated recycling of waste concrete used in harsh environments is still a complex problem.This paper discusses the durability and recyclability of recycled aggregate concrete(RAC)as a prefabricated material in the harsh environment,the effect of high-temperature curing(60℃,80℃,and 100℃)on the frost resistance of RAC and physical properties of the second generation recycled coarse aggregate(RCA_(2))of RAC after 300 freeze-thaw cycles were studied.The frost resistance of RAC was characterized by compressive strength,relative dynamic elastic modulus,and mass loss.As the physical properties of RCA_(2),the apparent density,water absorption,and crushing value were measured.And the SEM images of RAC after 300 freeze-thaw cycles were shown.The results indicated that the frost resistance of RAC cured at 80℃ for 7 days was comparable to that cured in the standard condition(cured for 28 days at 20℃±2℃ and 95%humidity),and the RAC cured at 100℃ was slightly worse.However,the frost resistance of RAC cured at 60℃ deteriorated seriously.The RAC cured at 80℃ for 7 days is the best.Whether after the freeze-thaw cycle or not,the RCA that curd at 60℃,80℃,and 100℃ for 7 days can also meet the requirements of Grade III RCA and be used as the aggregate of non-bearing part of prefabricated concrete components.RCA_(2) which is cured at 80℃ for 7 days had the best physical properties.展开更多
Warming and nitrogen(N)deposition are two important drivers of global climate changes.Coarse woody debris(CWD)contains a large proportion of the carbon(C)in the total global C pool.The composition of soil microbial co...Warming and nitrogen(N)deposition are two important drivers of global climate changes.Coarse woody debris(CWD)contains a large proportion of the carbon(C)in the total global C pool.The composition of soil microbial communities and environmental changes(i.e.,N deposition and warming)are the key drivers of CWD decomposition,but the interactive impact between N deposition and warming on the composition of soil microbial communities and CWD decomposition is still unclear.In a laboratory experiment,we study and simulate respiration during decomposition of the CWD(C 98)of Cryptomeria japonica(CR)and Platycarya strobilacea(PL)in response to warming and N deposition over 98 days.Resuts show that either warming or N addition signifi cantly accelerated the C 98 of the two tree species by altering the soil microbial community(bacterial:fungi and G+:G–).The combined treatment(warming+N)resulted in a decomposition eff ect equal to the sum of the individual eff ects.In addition,the species composition of bacteria and fungi was obviously aff ected by warming.However,N deposition had a remarkable infl uence on G+:G–.Our results indicated that N deposition and warming will observably alter the composition and growth of the microbial community and thus work synergistically to accelerate CWD decomposition in forest ecosystems.We also present evidence that N deposition and warming infl uenced the composition and balance of soil microbial communities and biogeochemical cycling of forest ecosystems.展开更多
The 3D reconstruction and quantitative characterization of drainage channels and coarse tailings particles in a bed were conducted in this study.The influence of variations in the azimuthal angle(θ)and polar angle(φ...The 3D reconstruction and quantitative characterization of drainage channels and coarse tailings particles in a bed were conducted in this study.The influence of variations in the azimuthal angle(θ)and polar angle(φ)of coarse particles on drainage channel structure was analyzed,and the drainage mechanism of the bed was studied.Results showed that water discharge in the bed reduced the size of pores and throat channels,increasing slurry concentration.The throat channel structure was a key component of the drainage process.Theφandθof particles changed predominantly along the length direction.The changes inφhad a cumulative plugging effect on the drainage channel and increased the difficulty of water discharge.The rake and rod formed a shear ring in the tailings bed with shear,and theθdistribution of particles changed from disorderly to orderly during the rotation process.The drainage channel was squeezed during the shearing process with the change inθ,which broke the channel structure,encouraged water discharge in the bed,and facilitated a further increase in slurry concentration.The findings of this work are expected to offer theoretical guidance for preparing high-concentration underflow in the tailings thickening process.展开更多
Quartz, the second most abundant mineral in the earth's crust, is a gangue mineral in practically every flotation process. Coarse quartz flotation has been a long standing problem in various mineral processing pla...Quartz, the second most abundant mineral in the earth's crust, is a gangue mineral in practically every flotation process. Coarse quartz flotation has been a long standing problem in various mineral processing plants to reduce milling cost and increase valuable mineral recovery. Based on this, the effects of nanobubbles(NBs) and hydrodynamic parameters on coarse quartz particle flotation were systematically investigated. Mechanical flotation experiments were carried out using the 7 cm and 9 cm diameter impellers in order to produce different hydrodynamic conditions. 900–1300 rpm impeller speeds were used for the 7 cm diameter impeller and 554–786 rpm for the 9 cm diameter impeller. The results show that the presence of NBs increased the flotation recovery of à425 + 106 lm quartz by up to 21%. For the7 cm diameter impeller, the maximum flotation recoveries of 86.4% and 98% were obtained in the absence and presence of NBs at Reynolds number(Re) of 81,000 and 66,000, respectively. For the 9 cm diameter impeller, the maximum recoveries of 86.3% and 97.5% were obtained in the absence and presence of NBs at Re of 90,000 and 75,000, respectively. NBs increased the flotation rate constant up to 36%.展开更多
Fine particles in seawater commonly form large porous aggregates. Aggregate density and settling velocity determine the behavior of this suspended particulate matter(SPM) within the water column.However, few studies o...Fine particles in seawater commonly form large porous aggregates. Aggregate density and settling velocity determine the behavior of this suspended particulate matter(SPM) within the water column.However, few studies of aggregate particles over a continental shelf have been undertaken. In our case study, properties of aggregate particles, including size and composition, over the continental shelf of the North Yellow Sea were investigated. During a scienti?c cruise in July 2016, in situ ef fective particle size distributions of SPM at 10 stations were measured, while temperature and turbidity measurements and samples of water were obtained from surface, middle, and bottom layers. Dispersed and inorganic particle size distributions were determined in the laboratory. The in situ SPM was divided into(1) small particles(<32 μm),(2) medium particles(32–256 μm) and(3) large particles(>256 μm). Large particles and medium particles dominated the total volume concentrations(VCs) of in situ SPM. After dispersion, the VCs of medium particles decreased to low values(<0.1 μL/L). The VCs of large particles in the surface and middle layers also decreased markedly, although they had higher peak values(0.1–1 μL/L). This suggests that almost all in situ medium particles and some large particles were aggregated, while other large particles were single particles. Correlation analysis showed that primary particles <32 μm in?uenced the formation of these aggregates. Microscopic examination revealed that these aggregates consisted of both organic and inorganic ?ne particles, while large particles were mucus-bound organic aggregates or individual plankton.The vertical distribution of coarser particles was clearly related to water strati?cation. Generally, medium aggregate particles were dominant in SPM of the bottom layer. A thermocline blocked resuspension of?ne material into upper layers, yielding low VCs of medium-sized aggregate particles in the surface layer.Abundant large biogenic particles were present in both surface and middle layers.展开更多
Background: With the objective of increasing knowledge on biomass and carbon stocks, and thus improving the accuracy of published estimates, the present study explored wood density and carbon concentration of coarse w...Background: With the objective of increasing knowledge on biomass and carbon stocks, and thus improving the accuracy of published estimates, the present study explored wood density and carbon concentration of coarse woody debris (diameter≥10) by decay class in a Seasonal Semi-deciduous Forest (SSF) area in the Atlantic Rain Forest and in a Cerrado sensu-stricto (CSS) area (Brazilian savanna), in Brazil. Two strata were identified in each area and ten sampling units were systematic located in each stratum. Data were collected according to the line intersect sampling method. Each tallied element, the diameter, length, and perpendicular width were recorded at the transect intersection point. Each element was classified into a decay class, and the species was identified when possible. Sample discs were cut from each element, from which cylindrical samples were extracted and oven-dried to determine density. These cylinders were milled and analyzed using a LECO-C632 to determine carbon concentration as percentage of mass. Results: In both areas, wood density decreased as the decay class increased. For SSF the mean carbon concentration of all analyzed samples was 49.8% with a standard deviation of 3.3, with a range of 27.9–57.0% across 506 observations. For CSS the general mean was 49.6% with a standard deviation of 2.6, with a range of 31.2–54.5% over 182 observations. Carbon concentration barely change between decay classes. Carbon stock was estimated at 3.3 and 0.7 MgC/ha for the SSF and the CSS, respectively. Similar results were obtained when using a 50% conversion constant. Conclusions: The present study concludes that wood density decreases as the woody debris becomes more decomposed, a pattern found in many previous studies. The carbon concentration, however, barely changes between decay classes, and that result is consistent with most of the literature reviewed. Our carbon concentrations are very close to the 50% used most commonly as a conversion factor. We strongly recommend that future studies of CWD evaluate wood density and carbon concentration by decay class to address the uncertainty still found in the literature.展开更多
The effect of titanium content on the refinement of austenite grain size in as-cast peritectic carbon steel was investigated by fast directional solidification experiments with simulating the solidification and growth...The effect of titanium content on the refinement of austenite grain size in as-cast peritectic carbon steel was investigated by fast directional solidification experiments with simulating the solidification and growth of surface and subsurface austenite in continuously cast slabs.Transmission electron microscope(TEM)and scanning electron microscope(SEM)were used to analyze the size and distribution of Ti(C,N)precipitates during solidification.Based on these results,the pinning pressure of Ti(C,N)precipitates on the growth of coarse columnar grains(CCGs)was studied.The results show that the austenite microstructure of as-cast peritectic carbon steel is mainly composed of the regions of CCGs and fine columnar grains(FCGs).Increasing the content of titanium reduces the region and the short axis of the CCGs.When the content of titanium is 0.09wt%,there is no CCG region.Dispersed microscale particles will firstly form in the liquid,which will decrease the transition temperature from FCGs to CCGs.The chain-like nanoscale Ti(C,N)will precipitate with the decrease of the transition temperature.Furthermore,calculations shows that the refinement of the CCGs is caused by the pinning effect of Ti(C,N)precipitates.展开更多
The aim of this research was to evaluate the amount of woody debris (m3/ha) on the forest floor and the associated wood-colonizing fungi. The study was performed in the Taborz region, known for its Scots pine provenan...The aim of this research was to evaluate the amount of woody debris (m3/ha) on the forest floor and the associated wood-colonizing fungi. The study was performed in the Taborz region, known for its Scots pine provenance experiments, against the background of a recently launched Polish legislation to protect the biodiversity on the forest floor in managed (harvested) stands. We investigated a managed stand (136-years-old) and the reserve stand ‘Sosna Taborska’(261-years-old). In the reserve stand, the mean volume of woody debris was six times higher than in the managed forests, i.e. 65 versus 11 m3/ha. In addition, in the reserve stand, the number of fungi taxa colonizing the dead wood was larger than in the managed stands, with a higher number of fruitbodies. Total fungal richness was higher in the reserve than in the managed stand, i.e. 28 versus 12 species. The dominant taxa at both sites were Fomitopsis pinicola and Fomes The aim of this research was to evaluate the amount of woody debris (m^3/ha) on the forest floor and the associated wood-colonizing fungi. The study was performed in the Taborz region, known for its Scots pine provenance experiments, against the background of a recently launched Polish legislation to protect the biodiversity on the forest floor in managed (harvested) stands. We investigated a managed stand (136-years-old) and the reserve stand ‘Sosna Taborska’(261-years-old). In the reserve stand, the mean volume of woody debris was six times higher than in the managed forests, i.e. 65 versus 11 m^3/ha. In addition, in the reserve stand, the number of fungi taxa colonizing the dead wood was larger than in the managed stands, with a higher number of fruitbodies. Total fungal richness was higher in the reserve than in the managed stand, i.e. 28 versus 12 species. The dominant taxa at both sites were Fomitopsis pinicola and Fomes fomentarius, although some taxa were only found in the reserve (e.g., Stereum hirsutum). The volume of woody debris as well as the diversity of fungi in the managed stand were lower than in the reserve, albeit greater than in other Scots pine stands in Poland. These results testify to the gains in biodiversity yielded by the management conservation management approach at the reserve stand.展开更多
Formation of entrance and exit defects in coarse pitch orbital drilling(CPOD)of carbon fiber reinforced plastic(CFRP)plates was investigated.Deep observation on entrance and exit morphology shows tear and burr are typ...Formation of entrance and exit defects in coarse pitch orbital drilling(CPOD)of carbon fiber reinforced plastic(CFRP)plates was investigated.Deep observation on entrance and exit morphology shows tear and burr are typical defects.Meanwhile,tear is more obvious than burr,and more entrance tears emerge than exit tears.As one of the major causes of entrance and exit defects in CPOD,cutting forces were substaintially studied by contrast experiments.Then,the effect of cutting parameters on entrance and exit tear was qualitatively analyzed through a single factor test.Experiment results indicate that the variation of rotation speed has little influence on entrance and exit tear.Increasing tangential feed per tooth can enlarge entrance tear,but bring little effect on exit tear.By increasing axial feed pitch,the hole entrance and exit show severe tear.When revolution radius grows bigger and bigger,entrance and exit tear firstly decreases,and then increases.Finally,the models of tear and delamination during CPOD of CFRP were established,the formation mechanisms of entrance and exit defects were revealed,and the control strategies were accordingly put forward.展开更多
A new technology for the crystallization of ammonium paratungstate with coarse grain has beenstudied. The factors influencing the physi-chemical properties of ammonium paratungstate crystal, such astemperature, concen...A new technology for the crystallization of ammonium paratungstate with coarse grain has beenstudied. The factors influencing the physi-chemical properties of ammonium paratungstate crystal, such astemperature, concentration, seed crystal, agitation. etc. were examined. It is necessary to keep high temperature and low concentration in the process. and the addition of seed crystal and agitation with air is also in favor of the system. Ammonium paratungstate crystal with particle size of 36-42 μm and apparent density of2. 0-2. 2 g·cm- 3 were obtained by controlling suitable technological parameters.展开更多
Practical assessment of subgrade settlement induced by train operation requires developing suitable models capable of describing permanent deformation characteristics of subgrade filling under repeated dynamic loading...Practical assessment of subgrade settlement induced by train operation requires developing suitable models capable of describing permanent deformation characteristics of subgrade filling under repeated dynamic loading.In this paper,repeated load triaxial tests were performed on coarse-grained soil(CGS),and the axial permanent strain of CGS under different confining pressures and dynamic stress amplitudes was analysed.Permanent deformation behaviors of CGS were categorized based on the variation trend of permanent strain rate with accumulated permanent strain and the shakedown theory.A prediction model of permanent deformation considering stress state and number of load cycles was established,and the ranges of parameters for different types of dynamic behaviors were also divided.The results indicated that the variational trend of permanent strain rate with accumulated permanent strain can be used as a basis for classifying dynamic behaviors of CGS.The stress state(confining pressure and dynamic stress amplitude)has significant effects on the permanent strain rate.The accumulative characteristics of permanent deformation of CGS with the number of load cycles can be described by a power function,and the model parameters can reflect the influence of confining pressure and dynamic stress amplitude.The study’s results could help deepen understanding of the permanent deformation characteristics of CGS.展开更多
Coarse grain heat-affected zone samples of X80 pipeline steel under different heat inputs were obtained through thermal welding simulation experiments with Gleeble 3500.Charpy impact tests and a combination of multisc...Coarse grain heat-affected zone samples of X80 pipeline steel under different heat inputs were obtained through thermal welding simulation experiments with Gleeble 3500.Charpy impact tests and a combination of multiscale characterizations were conducted to investigate the influence of various microstructural features on impact toughness and crack initiation behavior.The results prove that, as the heat input increases, the number of M/A components increases, thereby degrading toughness and increasing hardness.Meanwhile, more M/A constituents tend to aggregate on prior austenite grain boundaries(PAGBs),and the overall dimensions of M/A and the width and volume fraction of the lath martensite substructure inside M/A islands would increase as well.These changes make intersections between boundary M/As and PAGBs become one of the preferred sites for crack initiation.In addition, only large-sized grotesque inclusions can act as a direct inducement of crack initiation.展开更多
Continuously changing climate and availability of different rice genotypes make it necessary to find optimum time of sowing as well as suitable variety for cultivation to get maximum productivity under a specific set ...Continuously changing climate and availability of different rice genotypes make it necessary to find optimum time of sowing as well as suitable variety for cultivation to get maximum productivity under a specific set of climatic conditions. A field study was carried out to search out the suitable rice transplanting time for four different coarse genotypes under the semi-arid environment of Faisalabad. The experiment was conducted at Agronomic Research Area, University of Agriculture, Faisalabad and was laid out in randomized complete block design (RCBD) with split plot arrangement keeping transplanting time in main plots while rice genotypes in subplots. Variability among treatments was measured by Fisher’s ANOVA (P ≤ 5%) and LSD test was applied to compare the differences among treatments’ means. The ANOVA indicated statistically significant differences among genotypes as well as transplanting dates irrespective of all studied traits while interactive effects of both were found to be non-significant. NIBGE-1 performed best with maximum paddy yield of 6.05 t/ha while KSK-434 performed poor with paddy yield of 2.78 t/ha. Increased paddy yield and yield related parameters of all rice genotypes were recorded where transplantation was done on 25th of June. Generally, paddy yield decreased with delaying the transplanting time. The results suggested that NIBGE-1 can perform better under the semi-arid conditions of Faisalabad and last week of June might be the optimum time for nursery transplantation. It can also be further elucidated that late transplanting causes yield reduction which could not be recommended among farmers.展开更多
The feeding of coarse particles (>0.5 mm diameter) directly into a riser operating at positive pressure is important for drying and pre-heating applications. The presence of the feeding device can lead to heterogen...The feeding of coarse particles (>0.5 mm diameter) directly into a riser operating at positive pressure is important for drying and pre-heating applications. The presence of the feeding device can lead to heterogeneity of drying and heating, and is the main factor responsible for pressure loss in short conveying systems. However, there is a lack of information concerning the axial and radial distributions of coarse particles in this type of configuration, despite the recent advances when dealing with fine particles (FCC catalyst). The present work therefore investigates a vertical venturi feeder with the conveying system operating in dilute-phase regime with 1 mm spherical glass particles. Experimental assays revealed the behavior of the mass flow rate of solids in the system, and pressure measurements were made along the riser in order to evaluate the accuracy of simulations. Euler-Euler simulations provided close estimation of the experimental pressure drop and the pressure drop according to distance in the linear region. Simulation of the fluid dynamics in the riser showed that solids clusters were formed at low concentrations near the feeding device, reflecting heterogeneity in the solid phase volume fraction.展开更多
Comparative study and analysis were undertaken by the authors on the digestive rate of animal ration’s coarse cellulose in bamboo powder+concentrates and bamboo+concentrates by man-fed Giant pandas at Fuzhou Giant Pa...Comparative study and analysis were undertaken by the authors on the digestive rate of animal ration’s coarse cellulose in bamboo powder+concentrates and bamboo+concentrates by man-fed Giant pandas at Fuzhou Giant Panda Research Center in the attempt to find out effective ways to raise the digestive and absorptive rates of coarse cellulose and to prevent giant panda from intestinal obstruction.The results demonstrate:1,The difference in digestive rate of coarse cellulose between bamboo powder+concentrates and bamboo+concentrates is extremely significant (t= 15.73>t0.01 (4,3)=3. 57). 2.The digestive rate of coarse cellulose in bamboo powder made of different bamboo species is not notably different.(F=2.05<F0.05 (2,8)=4.46) 3. In the experiment group.there exists no notable difference in digestive rate of coarse cellulose of bamboo powder among mdividuals (P<0.01 ). The experiment shows that if giant panda is fed with mechanically ground bamboo combined with concentrates of balanced nutrients,the digestive rate of coarse cellulose in the rations can be favorably increased, thus the effective utilization of bamboo as a line of the animal’s feed and the raising feeding returns can be made more effective.The effects of bamboo powder on Giant pandas digestive organs and digestive physiology,digestive rate of coarse cellulose of different bamboo species.the difference in digestive functions among individual Giant Panda needs further studies.展开更多
Using the self-developed visualization test apparatus, centrifuge model tests at 20 g were carried out to research the macro and microscopic formation mechanism of coarse sand debris flows. The formation mode and soil...Using the self-developed visualization test apparatus, centrifuge model tests at 20 g were carried out to research the macro and microscopic formation mechanism of coarse sand debris flows. The formation mode and soil-water interaction mechanism of the debris flows were analyzed from both macroscopic and microscopic points of view respectively using high digital imaging equipment and micro-structure analysis software Geodip. The test results indicate that the forming process of debris flow mainly consists of three stages, namely the infiltration and softening stage, the overall slide stage, and debris flow stage. The essence of simulated coarse sand slope forming debris flow is that local fluidization cause slope to wholly slide. The movement of small particles forms a transient stagnant layer with increasing saturation, causing soil shear strength lost and local fluidization. When the driving force of the saturated soil exceeds the resisting force, debris flow happens on the coarse sand slope immediately.展开更多
The decomposition of coarse woody debris(CWD)affects the energy flow and nutrient cycling in forest ecosystems.Previous studies on CWD have focused on the input,decomposition,reserve dynamics,and CWD functions,but coa...The decomposition of coarse woody debris(CWD)affects the energy flow and nutrient cycling in forest ecosystems.Previous studies on CWD have focused on the input,decomposition,reserve dynamics,and CWD functions,but coarse woody debris decomposition is complex and the results from different regions vary considerably.It is not clear which factors affect decay rate(k),especially at different decomposition stages.In this study,a single-exponential decay model was used to analyze the characteristics of CWD decomposition in Larix gmelinii forests over the 33 years following a fire in the Greater Khingan Mountains.The results show that the decay rate of coarse woody debris was positively correlated to decay class.The average decomposition rate was 0.019,and 41 years and 176 years are needed for a 50%and 95%mass loss,respectively.CWD nutrient content,density,and water content could explain the variance in the decay rate(~42%)of the decay factors such as amount of leaching,degree of fragmentation,respiration of the debris,and biotransformation,and varied significantly between different decay classes.Using the space-time substitution method,this study arranged the coarse woody debris of different mortality times to form a 33 year chronosequence which revealed the decomposition process.It was concluded that the decay rate was mainly explained by structural component of the debris and its nitrogen and water contents.This paper quantifies the indicators affecting CWD decay to explain the decomposition process.展开更多
The effects of carbon dioxide (CO_(2)) curing conditions (temperature,relative humidity and CO_(2) curing time) on the physical properties of recycled coarse aggregate (RCA) with varying attached mortar (AM) contents ...The effects of carbon dioxide (CO_(2)) curing conditions (temperature,relative humidity and CO_(2) curing time) on the physical properties of recycled coarse aggregate (RCA) with varying attached mortar (AM) contents were studied.Before and after CO_(2) curing,the physical properties in terms of the apparent density,water absorption and crushing value of RCA were tested and the quality of RCA was determined.Besides,scanning electron microscope was used to observe the microstructure of RCA.Results show that the physical properties variation of RCA with higher AM content are more significant,and the quality of RCA with lower AM content is easier to be upgraded during CO_(2) curing.The physical properties of RCA with 40.8% AM content are earlier stable than that with no less than 44.5% AM content during CO_(2) curing.The optimal temperature and relative humidity are 50 ℃ and 55% for CO_(2) curing,respectively.CO_(2) curing is incapable of upgrading the quality of RCA with AM no less than 50.6%.The quality of RCA with 44.5% AM content can be upgraded only under the optimum CO_(2) curing conditions.Under relative humidity higher than 40% and the CO_(2) curing time more than 12 h,CO_(2) curing upgrades the quality of RCA with 40.8% AM content.展开更多
The rheological behaviors of highly concentrated fine particle suspensions(clay-silt-water mixtures)and coarse particle suspensions(coarse particles within a fine particle suspension)were investigated in this study.Ex...The rheological behaviors of highly concentrated fine particle suspensions(clay-silt-water mixtures)and coarse particle suspensions(coarse particles within a fine particle suspension)were investigated in this study.Experimental results demonstrated that the Bingham Fluid Model with two rheological parameters,Bingham yield stressand viscosity,wellcharacterized the rheological behavior of fine particle suspensions at shear rates between 4 and 20 s^(-1).The inclusion of coarse particles within a fine particle suspension induced an enhancement to the rheological parameters.The rheological parameters of a coarse particle suspension not only depend on its total particle fraction but also on its relative fine/coarse particle fractions.Empirical equations of these two parameters were proposed,quantitatively related to both fine and coarse particle fractions.Results indicated that the Bingham yield stress and viscosity are much more(an order larger)sensitive to changes in fine particle fraction than to changes in coarse particle fraction.展开更多
基金Funded by Joint Funds of the National Natural Science Foundation of China(No.U1904188)the Jiangxi Provincial Department of Education Science and Technology Project(Nos.GJJ171079,GJJ181023,and GJJ181022)。
文摘To solve the problem of only surface carbonation and realize high-efficiency carbonation of recycled coarse aggregate,the method of carbonated recycled coarse aggregate with nano materials pre-soaking was first put forward.The carbonation effect of modified recycled coarse aggregate with three different carbonation methods was evaluated,and water absorption,apparent density and crush index of modified recycled coarse aggregate were measured.Combined with XRD,SEM,and MIP microscopic analysis,the high-efficiency carbonation strengthening mechanism of modified recycled coarse aggregate was revealed.The experimental results show that,compared with the non-carbonated recycled coarse aggregate,the physical and microscopic properties of carbonated recycled coarse aggregate are improved.The method of carbonation with nano-SiO_(2) pre-soaking can realize the high-efficiency carbonation of recycled coarse aggregate,for modified recycled coarse aggregate with the method,water absorption is reduced by 23.03%,porosity is reduced by 44.06%,and the average pore diameter is 21.82 nm.The high-efficiency carbonation strengthening mechanism show that the pre-socked nano-SiO_(2) is bound to the hydration product Ca(OH)_(2) of the old mortar with nano-scale C-S-H,which can improve the CO_(2) absorption rate,accelerate the carbonation reaction,generate more stable CaCO_(3) and nano-scale silica gel,and bond to the dense three-dimensional network structure to realize the bidirectional enhancement of nano-materials and pressurized carbonation.It is concluded that the method of carbonation with nano-SiO_(2) pre-soaking is a novel high-efficiency carbonation modification of recycled coarse aggregate.
基金This research was funded by the National Natural Science Foundation of China(52078068)Practice Innovation Program of Jiangsu Province(KYCX22_3082).
文摘With the emphasis on environmental issues,the recycling of waste concrete,even recycled concrete,has become a hot spot in the field of architecture.But the repeated recycling of waste concrete used in harsh environments is still a complex problem.This paper discusses the durability and recyclability of recycled aggregate concrete(RAC)as a prefabricated material in the harsh environment,the effect of high-temperature curing(60℃,80℃,and 100℃)on the frost resistance of RAC and physical properties of the second generation recycled coarse aggregate(RCA_(2))of RAC after 300 freeze-thaw cycles were studied.The frost resistance of RAC was characterized by compressive strength,relative dynamic elastic modulus,and mass loss.As the physical properties of RCA_(2),the apparent density,water absorption,and crushing value were measured.And the SEM images of RAC after 300 freeze-thaw cycles were shown.The results indicated that the frost resistance of RAC cured at 80℃ for 7 days was comparable to that cured in the standard condition(cured for 28 days at 20℃±2℃ and 95%humidity),and the RAC cured at 100℃ was slightly worse.However,the frost resistance of RAC cured at 60℃ deteriorated seriously.The RAC cured at 80℃ for 7 days is the best.Whether after the freeze-thaw cycle or not,the RCA that curd at 60℃,80℃,and 100℃ for 7 days can also meet the requirements of Grade III RCA and be used as the aggregate of non-bearing part of prefabricated concrete components.RCA_(2) which is cured at 80℃ for 7 days had the best physical properties.
基金supported by the National Natural Science Foundation of China(3196140162).
文摘Warming and nitrogen(N)deposition are two important drivers of global climate changes.Coarse woody debris(CWD)contains a large proportion of the carbon(C)in the total global C pool.The composition of soil microbial communities and environmental changes(i.e.,N deposition and warming)are the key drivers of CWD decomposition,but the interactive impact between N deposition and warming on the composition of soil microbial communities and CWD decomposition is still unclear.In a laboratory experiment,we study and simulate respiration during decomposition of the CWD(C 98)of Cryptomeria japonica(CR)and Platycarya strobilacea(PL)in response to warming and N deposition over 98 days.Resuts show that either warming or N addition signifi cantly accelerated the C 98 of the two tree species by altering the soil microbial community(bacterial:fungi and G+:G–).The combined treatment(warming+N)resulted in a decomposition eff ect equal to the sum of the individual eff ects.In addition,the species composition of bacteria and fungi was obviously aff ected by warming.However,N deposition had a remarkable infl uence on G+:G–.Our results indicated that N deposition and warming will observably alter the composition and growth of the microbial community and thus work synergistically to accelerate CWD decomposition in forest ecosystems.We also present evidence that N deposition and warming infl uenced the composition and balance of soil microbial communities and biogeochemical cycling of forest ecosystems.
基金financially supported by the National Key R&D Program of China(No.2022YFC2903803)National Natural Science Foundation of China(No.52130404)+4 种基金Guangdong Basic and Applied Basic Research Foundation(No.2021A1515110161)ANID(Chile)through Fondecyt project 1210610Centro de Modelamiento Matemático(BASAL funds for Centers of Excellence FB210005)CRHIAM project ANID/FONDAP/15130015Anillo project ANID/ACT210030。
文摘The 3D reconstruction and quantitative characterization of drainage channels and coarse tailings particles in a bed were conducted in this study.The influence of variations in the azimuthal angle(θ)and polar angle(φ)of coarse particles on drainage channel structure was analyzed,and the drainage mechanism of the bed was studied.Results showed that water discharge in the bed reduced the size of pores and throat channels,increasing slurry concentration.The throat channel structure was a key component of the drainage process.Theφandθof particles changed predominantly along the length direction.The changes inφhad a cumulative plugging effect on the drainage channel and increased the difficulty of water discharge.The rake and rod formed a shear ring in the tailings bed with shear,and theθdistribution of particles changed from disorderly to orderly during the rotation process.The drainage channel was squeezed during the shearing process with the change inθ,which broke the channel structure,encouraged water discharge in the bed,and facilitated a further increase in slurry concentration.The findings of this work are expected to offer theoretical guidance for preparing high-concentration underflow in the tailings thickening process.
文摘Quartz, the second most abundant mineral in the earth's crust, is a gangue mineral in practically every flotation process. Coarse quartz flotation has been a long standing problem in various mineral processing plants to reduce milling cost and increase valuable mineral recovery. Based on this, the effects of nanobubbles(NBs) and hydrodynamic parameters on coarse quartz particle flotation were systematically investigated. Mechanical flotation experiments were carried out using the 7 cm and 9 cm diameter impellers in order to produce different hydrodynamic conditions. 900–1300 rpm impeller speeds were used for the 7 cm diameter impeller and 554–786 rpm for the 9 cm diameter impeller. The results show that the presence of NBs increased the flotation recovery of à425 + 106 lm quartz by up to 21%. For the7 cm diameter impeller, the maximum flotation recoveries of 86.4% and 98% were obtained in the absence and presence of NBs at Reynolds number(Re) of 81,000 and 66,000, respectively. For the 9 cm diameter impeller, the maximum recoveries of 86.3% and 97.5% were obtained in the absence and presence of NBs at Re of 90,000 and 75,000, respectively. NBs increased the flotation rate constant up to 36%.
基金Supported by the National Natural Science Foundation of China(No.41476045)the Strategic Priority Research Program of the Chinese Academy of Sciences(No.XDA11030103)
文摘Fine particles in seawater commonly form large porous aggregates. Aggregate density and settling velocity determine the behavior of this suspended particulate matter(SPM) within the water column.However, few studies of aggregate particles over a continental shelf have been undertaken. In our case study, properties of aggregate particles, including size and composition, over the continental shelf of the North Yellow Sea were investigated. During a scienti?c cruise in July 2016, in situ ef fective particle size distributions of SPM at 10 stations were measured, while temperature and turbidity measurements and samples of water were obtained from surface, middle, and bottom layers. Dispersed and inorganic particle size distributions were determined in the laboratory. The in situ SPM was divided into(1) small particles(<32 μm),(2) medium particles(32–256 μm) and(3) large particles(>256 μm). Large particles and medium particles dominated the total volume concentrations(VCs) of in situ SPM. After dispersion, the VCs of medium particles decreased to low values(<0.1 μL/L). The VCs of large particles in the surface and middle layers also decreased markedly, although they had higher peak values(0.1–1 μL/L). This suggests that almost all in situ medium particles and some large particles were aggregated, while other large particles were single particles. Correlation analysis showed that primary particles <32 μm in?uenced the formation of these aggregates. Microscopic examination revealed that these aggregates consisted of both organic and inorganic ?ne particles, while large particles were mucus-bound organic aggregates or individual plankton.The vertical distribution of coarser particles was clearly related to water strati?cation. Generally, medium aggregate particles were dominant in SPM of the bottom layer. A thermocline blocked resuspension of?ne material into upper layers, yielding low VCs of medium-sized aggregate particles in the surface layer.Abundant large biogenic particles were present in both surface and middle layers.
基金funded by the Sao Paulo Research Foundation(FAPESP)through a doctorate scholarship(Grant no.2013/10922-2)Research Internship Abroad(Grant no.2014/14213-9)
文摘Background: With the objective of increasing knowledge on biomass and carbon stocks, and thus improving the accuracy of published estimates, the present study explored wood density and carbon concentration of coarse woody debris (diameter≥10) by decay class in a Seasonal Semi-deciduous Forest (SSF) area in the Atlantic Rain Forest and in a Cerrado sensu-stricto (CSS) area (Brazilian savanna), in Brazil. Two strata were identified in each area and ten sampling units were systematic located in each stratum. Data were collected according to the line intersect sampling method. Each tallied element, the diameter, length, and perpendicular width were recorded at the transect intersection point. Each element was classified into a decay class, and the species was identified when possible. Sample discs were cut from each element, from which cylindrical samples were extracted and oven-dried to determine density. These cylinders were milled and analyzed using a LECO-C632 to determine carbon concentration as percentage of mass. Results: In both areas, wood density decreased as the decay class increased. For SSF the mean carbon concentration of all analyzed samples was 49.8% with a standard deviation of 3.3, with a range of 27.9–57.0% across 506 observations. For CSS the general mean was 49.6% with a standard deviation of 2.6, with a range of 31.2–54.5% over 182 observations. Carbon concentration barely change between decay classes. Carbon stock was estimated at 3.3 and 0.7 MgC/ha for the SSF and the CSS, respectively. Similar results were obtained when using a 50% conversion constant. Conclusions: The present study concludes that wood density decreases as the woody debris becomes more decomposed, a pattern found in many previous studies. The carbon concentration, however, barely changes between decay classes, and that result is consistent with most of the literature reviewed. Our carbon concentrations are very close to the 50% used most commonly as a conversion factor. We strongly recommend that future studies of CWD evaluate wood density and carbon concentration by decay class to address the uncertainty still found in the literature.
基金financially supported by the National Natural Science Foundation of China (Nos.51774075 and52174307)Liao Ning Revitalization Talents Program,China(No.XLYC1802032)
文摘The effect of titanium content on the refinement of austenite grain size in as-cast peritectic carbon steel was investigated by fast directional solidification experiments with simulating the solidification and growth of surface and subsurface austenite in continuously cast slabs.Transmission electron microscope(TEM)and scanning electron microscope(SEM)were used to analyze the size and distribution of Ti(C,N)precipitates during solidification.Based on these results,the pinning pressure of Ti(C,N)precipitates on the growth of coarse columnar grains(CCGs)was studied.The results show that the austenite microstructure of as-cast peritectic carbon steel is mainly composed of the regions of CCGs and fine columnar grains(FCGs).Increasing the content of titanium reduces the region and the short axis of the CCGs.When the content of titanium is 0.09wt%,there is no CCG region.Dispersed microscale particles will firstly form in the liquid,which will decrease the transition temperature from FCGs to CCGs.The chain-like nanoscale Ti(C,N)will precipitate with the decrease of the transition temperature.Furthermore,calculations shows that the refinement of the CCGs is caused by the pinning effect of Ti(C,N)precipitates.
基金supported by statutory funds No.15/20.610.028-300 from the Faculty of Environmental Management and Agriculture of the University of Warmia and Mazury in Olsztyn
文摘The aim of this research was to evaluate the amount of woody debris (m3/ha) on the forest floor and the associated wood-colonizing fungi. The study was performed in the Taborz region, known for its Scots pine provenance experiments, against the background of a recently launched Polish legislation to protect the biodiversity on the forest floor in managed (harvested) stands. We investigated a managed stand (136-years-old) and the reserve stand ‘Sosna Taborska’(261-years-old). In the reserve stand, the mean volume of woody debris was six times higher than in the managed forests, i.e. 65 versus 11 m3/ha. In addition, in the reserve stand, the number of fungi taxa colonizing the dead wood was larger than in the managed stands, with a higher number of fruitbodies. Total fungal richness was higher in the reserve than in the managed stand, i.e. 28 versus 12 species. The dominant taxa at both sites were Fomitopsis pinicola and Fomes The aim of this research was to evaluate the amount of woody debris (m^3/ha) on the forest floor and the associated wood-colonizing fungi. The study was performed in the Taborz region, known for its Scots pine provenance experiments, against the background of a recently launched Polish legislation to protect the biodiversity on the forest floor in managed (harvested) stands. We investigated a managed stand (136-years-old) and the reserve stand ‘Sosna Taborska’(261-years-old). In the reserve stand, the mean volume of woody debris was six times higher than in the managed forests, i.e. 65 versus 11 m^3/ha. In addition, in the reserve stand, the number of fungi taxa colonizing the dead wood was larger than in the managed stands, with a higher number of fruitbodies. Total fungal richness was higher in the reserve than in the managed stand, i.e. 28 versus 12 species. The dominant taxa at both sites were Fomitopsis pinicola and Fomes fomentarius, although some taxa were only found in the reserve (e.g., Stereum hirsutum). The volume of woody debris as well as the diversity of fungi in the managed stand were lower than in the reserve, albeit greater than in other Scots pine stands in Poland. These results testify to the gains in biodiversity yielded by the management conservation management approach at the reserve stand.
基金supported in part by the Major Project of the Ministry of Science and Technology of China(No.2012ZX04003-031)the Innovation Project of Jiangsu Province(No.2016-05)
文摘Formation of entrance and exit defects in coarse pitch orbital drilling(CPOD)of carbon fiber reinforced plastic(CFRP)plates was investigated.Deep observation on entrance and exit morphology shows tear and burr are typical defects.Meanwhile,tear is more obvious than burr,and more entrance tears emerge than exit tears.As one of the major causes of entrance and exit defects in CPOD,cutting forces were substaintially studied by contrast experiments.Then,the effect of cutting parameters on entrance and exit tear was qualitatively analyzed through a single factor test.Experiment results indicate that the variation of rotation speed has little influence on entrance and exit tear.Increasing tangential feed per tooth can enlarge entrance tear,but bring little effect on exit tear.By increasing axial feed pitch,the hole entrance and exit show severe tear.When revolution radius grows bigger and bigger,entrance and exit tear firstly decreases,and then increases.Finally,the models of tear and delamination during CPOD of CFRP were established,the formation mechanisms of entrance and exit defects were revealed,and the control strategies were accordingly put forward.
文摘A new technology for the crystallization of ammonium paratungstate with coarse grain has beenstudied. The factors influencing the physi-chemical properties of ammonium paratungstate crystal, such astemperature, concentration, seed crystal, agitation. etc. were examined. It is necessary to keep high temperature and low concentration in the process. and the addition of seed crystal and agitation with air is also in favor of the system. Ammonium paratungstate crystal with particle size of 36-42 μm and apparent density of2. 0-2. 2 g·cm- 3 were obtained by controlling suitable technological parameters.
基金This work was supported by the National Natural Science Foundation of China(Grant Nos.51878666 and 51678572).
文摘Practical assessment of subgrade settlement induced by train operation requires developing suitable models capable of describing permanent deformation characteristics of subgrade filling under repeated dynamic loading.In this paper,repeated load triaxial tests were performed on coarse-grained soil(CGS),and the axial permanent strain of CGS under different confining pressures and dynamic stress amplitudes was analysed.Permanent deformation behaviors of CGS were categorized based on the variation trend of permanent strain rate with accumulated permanent strain and the shakedown theory.A prediction model of permanent deformation considering stress state and number of load cycles was established,and the ranges of parameters for different types of dynamic behaviors were also divided.The results indicated that the variational trend of permanent strain rate with accumulated permanent strain can be used as a basis for classifying dynamic behaviors of CGS.The stress state(confining pressure and dynamic stress amplitude)has significant effects on the permanent strain rate.The accumulative characteristics of permanent deformation of CGS with the number of load cycles can be described by a power function,and the model parameters can reflect the influence of confining pressure and dynamic stress amplitude.The study’s results could help deepen understanding of the permanent deformation characteristics of CGS.
文摘Coarse grain heat-affected zone samples of X80 pipeline steel under different heat inputs were obtained through thermal welding simulation experiments with Gleeble 3500.Charpy impact tests and a combination of multiscale characterizations were conducted to investigate the influence of various microstructural features on impact toughness and crack initiation behavior.The results prove that, as the heat input increases, the number of M/A components increases, thereby degrading toughness and increasing hardness.Meanwhile, more M/A constituents tend to aggregate on prior austenite grain boundaries(PAGBs),and the overall dimensions of M/A and the width and volume fraction of the lath martensite substructure inside M/A islands would increase as well.These changes make intersections between boundary M/As and PAGBs become one of the preferred sites for crack initiation.In addition, only large-sized grotesque inclusions can act as a direct inducement of crack initiation.
文摘Continuously changing climate and availability of different rice genotypes make it necessary to find optimum time of sowing as well as suitable variety for cultivation to get maximum productivity under a specific set of climatic conditions. A field study was carried out to search out the suitable rice transplanting time for four different coarse genotypes under the semi-arid environment of Faisalabad. The experiment was conducted at Agronomic Research Area, University of Agriculture, Faisalabad and was laid out in randomized complete block design (RCBD) with split plot arrangement keeping transplanting time in main plots while rice genotypes in subplots. Variability among treatments was measured by Fisher’s ANOVA (P ≤ 5%) and LSD test was applied to compare the differences among treatments’ means. The ANOVA indicated statistically significant differences among genotypes as well as transplanting dates irrespective of all studied traits while interactive effects of both were found to be non-significant. NIBGE-1 performed best with maximum paddy yield of 6.05 t/ha while KSK-434 performed poor with paddy yield of 2.78 t/ha. Increased paddy yield and yield related parameters of all rice genotypes were recorded where transplantation was done on 25th of June. Generally, paddy yield decreased with delaying the transplanting time. The results suggested that NIBGE-1 can perform better under the semi-arid conditions of Faisalabad and last week of June might be the optimum time for nursery transplantation. It can also be further elucidated that late transplanting causes yield reduction which could not be recommended among farmers.
文摘The feeding of coarse particles (>0.5 mm diameter) directly into a riser operating at positive pressure is important for drying and pre-heating applications. The presence of the feeding device can lead to heterogeneity of drying and heating, and is the main factor responsible for pressure loss in short conveying systems. However, there is a lack of information concerning the axial and radial distributions of coarse particles in this type of configuration, despite the recent advances when dealing with fine particles (FCC catalyst). The present work therefore investigates a vertical venturi feeder with the conveying system operating in dilute-phase regime with 1 mm spherical glass particles. Experimental assays revealed the behavior of the mass flow rate of solids in the system, and pressure measurements were made along the riser in order to evaluate the accuracy of simulations. Euler-Euler simulations provided close estimation of the experimental pressure drop and the pressure drop according to distance in the linear region. Simulation of the fluid dynamics in the riser showed that solids clusters were formed at low concentrations near the feeding device, reflecting heterogeneity in the solid phase volume fraction.
文摘Comparative study and analysis were undertaken by the authors on the digestive rate of animal ration’s coarse cellulose in bamboo powder+concentrates and bamboo+concentrates by man-fed Giant pandas at Fuzhou Giant Panda Research Center in the attempt to find out effective ways to raise the digestive and absorptive rates of coarse cellulose and to prevent giant panda from intestinal obstruction.The results demonstrate:1,The difference in digestive rate of coarse cellulose between bamboo powder+concentrates and bamboo+concentrates is extremely significant (t= 15.73>t0.01 (4,3)=3. 57). 2.The digestive rate of coarse cellulose in bamboo powder made of different bamboo species is not notably different.(F=2.05<F0.05 (2,8)=4.46) 3. In the experiment group.there exists no notable difference in digestive rate of coarse cellulose of bamboo powder among mdividuals (P<0.01 ). The experiment shows that if giant panda is fed with mechanically ground bamboo combined with concentrates of balanced nutrients,the digestive rate of coarse cellulose in the rations can be favorably increased, thus the effective utilization of bamboo as a line of the animal’s feed and the raising feeding returns can be made more effective.The effects of bamboo powder on Giant pandas digestive organs and digestive physiology,digestive rate of coarse cellulose of different bamboo species.the difference in digestive functions among individual Giant Panda needs further studies.
基金Funded by National Natural Science Foundation of China(Grant No.41272296)
文摘Using the self-developed visualization test apparatus, centrifuge model tests at 20 g were carried out to research the macro and microscopic formation mechanism of coarse sand debris flows. The formation mode and soil-water interaction mechanism of the debris flows were analyzed from both macroscopic and microscopic points of view respectively using high digital imaging equipment and micro-structure analysis software Geodip. The test results indicate that the forming process of debris flow mainly consists of three stages, namely the infiltration and softening stage, the overall slide stage, and debris flow stage. The essence of simulated coarse sand slope forming debris flow is that local fluidization cause slope to wholly slide. The movement of small particles forms a transient stagnant layer with increasing saturation, causing soil shear strength lost and local fluidization. When the driving force of the saturated soil exceeds the resisting force, debris flow happens on the coarse sand slope immediately.
基金This research was funded by the National Key Research and Development Projects,Grant Number 2018YFE0207800the National Natural Science Foundation of China,Grant Number 41871103.
文摘The decomposition of coarse woody debris(CWD)affects the energy flow and nutrient cycling in forest ecosystems.Previous studies on CWD have focused on the input,decomposition,reserve dynamics,and CWD functions,but coarse woody debris decomposition is complex and the results from different regions vary considerably.It is not clear which factors affect decay rate(k),especially at different decomposition stages.In this study,a single-exponential decay model was used to analyze the characteristics of CWD decomposition in Larix gmelinii forests over the 33 years following a fire in the Greater Khingan Mountains.The results show that the decay rate of coarse woody debris was positively correlated to decay class.The average decomposition rate was 0.019,and 41 years and 176 years are needed for a 50%and 95%mass loss,respectively.CWD nutrient content,density,and water content could explain the variance in the decay rate(~42%)of the decay factors such as amount of leaching,degree of fragmentation,respiration of the debris,and biotransformation,and varied significantly between different decay classes.Using the space-time substitution method,this study arranged the coarse woody debris of different mortality times to form a 33 year chronosequence which revealed the decomposition process.It was concluded that the decay rate was mainly explained by structural component of the debris and its nitrogen and water contents.This paper quantifies the indicators affecting CWD decay to explain the decomposition process.
基金Funded by the National Natural Science Foundation of China (Nos. 52078068, 52108190)Changzhou Science and Technology Project (No. CJ20200079)Postgraduate Research&Practice Innovation Program of Jiangsu Province (No. KYCX21_2846)。
文摘The effects of carbon dioxide (CO_(2)) curing conditions (temperature,relative humidity and CO_(2) curing time) on the physical properties of recycled coarse aggregate (RCA) with varying attached mortar (AM) contents were studied.Before and after CO_(2) curing,the physical properties in terms of the apparent density,water absorption and crushing value of RCA were tested and the quality of RCA was determined.Besides,scanning electron microscope was used to observe the microstructure of RCA.Results show that the physical properties variation of RCA with higher AM content are more significant,and the quality of RCA with lower AM content is easier to be upgraded during CO_(2) curing.The physical properties of RCA with 40.8% AM content are earlier stable than that with no less than 44.5% AM content during CO_(2) curing.The optimal temperature and relative humidity are 50 ℃ and 55% for CO_(2) curing,respectively.CO_(2) curing is incapable of upgrading the quality of RCA with AM no less than 50.6%.The quality of RCA with 44.5% AM content can be upgraded only under the optimum CO_(2) curing conditions.Under relative humidity higher than 40% and the CO_(2) curing time more than 12 h,CO_(2) curing upgrades the quality of RCA with 40.8% AM content.
基金This work was financially supported by MOST 107-2221-E-006-029-MY3.
文摘The rheological behaviors of highly concentrated fine particle suspensions(clay-silt-water mixtures)and coarse particle suspensions(coarse particles within a fine particle suspension)were investigated in this study.Experimental results demonstrated that the Bingham Fluid Model with two rheological parameters,Bingham yield stressand viscosity,wellcharacterized the rheological behavior of fine particle suspensions at shear rates between 4 and 20 s^(-1).The inclusion of coarse particles within a fine particle suspension induced an enhancement to the rheological parameters.The rheological parameters of a coarse particle suspension not only depend on its total particle fraction but also on its relative fine/coarse particle fractions.Empirical equations of these two parameters were proposed,quantitatively related to both fine and coarse particle fractions.Results indicated that the Bingham yield stress and viscosity are much more(an order larger)sensitive to changes in fine particle fraction than to changes in coarse particle fraction.
