[Objectivc] This study aimed to investigate the chilling tolerance of seedlings of different cotton genotypes and screen appropriate indicators for assess- ing chilling tolerance, to establish reliable mathematical ev...[Objectivc] This study aimed to investigate the chilling tolerance of seedlings of different cotton genotypes and screen appropriate indicators for assess- ing chilling tolerance, to establish reliable mathematical evaluation model for chilling tolerance of cotton, thus providing theoretical basis for breeding and promoting new chilling-tolerant cotton germplasms and large-scale evaluation of chilling tolerance of cotton varieties. [Method] Fifteen cotton varieties （lines） were used as experimental materials. The photosynthetic gas exchange parameters, chlorophyll fluorescence ki- netic parameters, chlorophyll content, relative soluble sugar content, malonaldehyde content, relative proiine content, relative conductivity and other 12 physiological indi- cators of seedling leaves under low temperature treatment （5 ℃, 12 h） and recovery treatment （25 ℃. 24 h） were determined; based on the chilling tolerance coefficient （CTC） of various individual indicators, the comprehensive evaluation of chilling toler- ance was conducled by using principal component analysis, hierarchical cluster anal- ysis and stepwise regression analysis. [Result] The results showed that the 12 indi- vidual physiological indicators could be classified into 7 independent comprehensive components by principal component analysis; 15 cotton varieties （lines） were clus- tered into three categories by using membership function method and hierarchical cluster analysis; the mathematical model for evaluating chilling tolerance of cotton seedlings was established： D =0.275 -0.244Fo1 ＋0.206Fv/Fm1＋0.326g,%-0.056SS ＋ 0.225MDA＋O.O38REC （FF=0.995）, and the evaluation accuracy of the equation was higher than 94.25%,0. Six identification indicators closely related to chilling tolerance were screened, including Fo,, Fv/Fm1, Seedling leaves of cotton varieties （lines） gs2, SS, MDA, and REC. [Conclusion] with high chilling tolerance are less dam- aged under low temperature stress, and are able to maintain relatively high photo- synthetic electron transport capacity and high stomatal conductance after recovery treatment, which is contributed to gas exchange and recovery of photosynthetic ca- pacity. Determination of the six indicators under the same stress condition can be adopted for rapid identification and prediction of the chilling tolerance of other cotton varieties, which provides basis for the breeding, promotion, identification and screen- ing of chilling tolerant germplasms.展开更多
The drought resistance of Pennisetum sp. was analyzed under different drought stress conditions simulated by various concentrations of PEG-6000. Changesofa series of indexes such as chlorophyll content, water content,...The drought resistance of Pennisetum sp. was analyzed under different drought stress conditions simulated by various concentrations of PEG-6000. Changesofa series of indexes such as chlorophyll content, water content, relative electrical conductivity of osmotic solution, MDA content, proline content, soluble polysaccharide content and soluble protein content in the leaves were measured.The correlation of these indexes with the drought resistance of Pennisetum sp. was an- alyzed by the method of grey correlation analysis. The results showed that the chlorophyll, water content, relative electrical conductivity and soluble protein con- tentexhibited obvious negative correlation with the stress concentration, which de- creasedfollowing the increase of PEG-6000 concentration. The soluble polysaccha- ride contentshowed an increasing trend,the MDA content showed a rise at first fol- lowed by a declinetrend, while the prolinecontent was just opposite to MDA. The changes of the 3 indexes showed obvious positive correlation with thestress con- centration. The correlation of these indexes with the drought resistance of Pennise- tum sp. were ranked as follows： leaf water content （0.980 8）, chlorophyll content （0.967 9）, MDA content （0.876 0）, soluble polysaccharide content （0.839 5）, soluble protein content（0.827 5）, relative electrical conductivity of osmotic solution（0.670 8）, and proline content（0.571 3）.展开更多
The manuscript explores the complex interplay between groundnut genotypes,salt tolerance and hormonal influence,shedding light on the dynamic responses of three specific groundnut genotypes,KDG-128,TG-37 A and GG-20,t...The manuscript explores the complex interplay between groundnut genotypes,salt tolerance and hormonal influence,shedding light on the dynamic responses of three specific groundnut genotypes,KDG-128,TG-37 A and GG-20,to salt treatments and gibberellic acid(GA3).The study encompasses germination,plant growth,total protein content and oil content as key parameters.Through comprehensive analysis,it identifies TG-37 A and KDG-128 as salt-tolerant genotypes,and GG-20 as salt-susceptible genotypes,which highlighting the potential for targeted breeding efforts to develop more resilient groundnut varieties.Moreover,the quantification of protein and oil content under different treatments provides vital data for optimizing nutritional profiles in groundnut cultivars.Principal Component Analysis(PCA) underscores the significance of the first principal component(PC1)in explaining the majority of variance,capturing primary trends and differences in plant length.Analysis of Variance(ANOVA) and hierarchical analysis confirm the presence of statistically significant differences in protein and oil content among the genotypes.Pearson's correlation coefficient matrix analysis reveals strong positive correlations between plant length and protein content,plant length and oil content,and a moderately positive correlation between protein content and oil content.These findings provide valuable insights into groundnut physiology,salt tolerance,and nutritional composition,with implications for future research in sustainable agriculture and crop improvement.展开更多
Tolerance analysis is investigated under an environment of concurrent design in order to lead to optimized tolerance, as traditional tolerance analysis is often inefficient and liable to mistakes. Making full use of k...Tolerance analysis is investigated under an environment of concurrent design in order to lead to optimized tolerance, as traditional tolerance analysis is often inefficient and liable to mistakes. Making full use of knowledge in manufacturing tolerance analysis combined with the beta distribution model is introduced and applied. The use of beta distribution reflects fully actual capabilities in manufacture. Concurrent tolerance design is a manufacturing environment oriented design process paying more attention to influences or restraints on product design caused by such factors as the manufacturing process, machine capabilities, economy in manufacturing, etc. Process environment oriented tolerance analysis is more flexible making the designed results more practical and effective.展开更多
The study was undertaken to assess the genetic effect of quantitative trait loci （QTLs） conferring heat tolerance at flowering stage in rice. A population consisting of 279 F2 individuals from the cross between 996,...The study was undertaken to assess the genetic effect of quantitative trait loci （QTLs） conferring heat tolerance at flowering stage in rice. A population consisting of 279 F2 individuals from the cross between 996, a heat tolerant cultivar and 4628, a heat-sensitive cultivar, was analyzed for their segregation pattern of the difference of seed set rate under optimal temperature condition and high temperature condition. The difference of seed set rate under optimal temperature condition and high temperature condition showed normal distribution, indicating the polygenic control over the trait. To identify main effect of QTL for heat tolerance, the parents were surveyed with 200 primer pairs of simple sequence repeats （SSR）. The parental survey revealed 30% polymorphism between parents. In order to detect the main QTL association with heat tolerance, a strategy of combining the DNA pooling from selected segregants and genotyping was adopted. The association of putative markers identified based on DNA pooling from selected segregants was established by single marker analysis （SMA）. The results of SMA revealed that SSR markers, RM3735 on chromosome 4 and RM3586 on chromosome 3 showed significant association with heat tolerance respectively, accounted for 17 and 3% of the total variation respectively. The heat tolerance during flowering stage in rice was controlled by multiple gene. The SSR markers, RM3735 on chromosome 4 and RM3586 on chromosome 3 showed significant association with heat tolerance respectively, accounted for 17 and 3% of the total variation respectively. The two genetic loci, especially for RM3735 on chromosome 4, can be used in marker-assistant-selected method in heat tolerance breeding in rice.展开更多
Electromagnetic relay in aerospace is one of the main electronic components in aerospace electronic systems for information transfer, control and power distribution, and its reliability will influence the reliability ...Electromagnetic relay in aerospace is one of the main electronic components in aerospace electronic systems for information transfer, control and power distribution, and its reliability will influence the reliability of the whole aerospace electronic systems. Reliability design is the key technique of electromagnetic relay reliability engineering. This paper synthetically analyzes the present reliability design methods, and presents the reliability tolerance analyzing mathematic models of electromagnetic force basing on orthogonal design, mechanical spring force basing on probability statistics theory, and matching characteristics of electromagnetic force and mechanical spring force basing on method of stressstrength interference. Some instructive conclusions are draw by researching on the reliability tolerance of some type electromagnetic relay in aerospace.展开更多
Tolerance analysis of a planetary reducer is conducted. By focusing the serially-arranged parts in the central line and setting an appropriate dimension as a “gap”, worst-case tolerance analysis method and statistic...Tolerance analysis of a planetary reducer is conducted. By focusing the serially-arranged parts in the central line and setting an appropriate dimension as a “gap”, worst-case tolerance analysis method and statistical （RSS） tolerance analysis are used, and then a tolerance-analyzing tool CE/TOL is introduced. The acceptable value range of the “gap” is from 1.5 mm to 3.5 mm. While worst-case analysis rejects the design, RSS accepts it by a more realistic result with the law of probability accounted. With the help of CE/TOL and CAD software Pro/E, all components＇ dimensions and tolerances are assigned and modified, and more detailed and more comprehensible results are gives out.展开更多
AIM: To further improve the endoscopic detection of intestinal mucosa alterations due to celiac disease(CD).METHODS: We assessed a hybrid approach based on the integration of expert knowledge into the computerbased cl...AIM: To further improve the endoscopic detection of intestinal mucosa alterations due to celiac disease(CD).METHODS: We assessed a hybrid approach based on the integration of expert knowledge into the computerbased classification pipeline. A total of 2835 endoscopic images from the duodenum were recorded in 290 children using the modified immersion technique(MIT). These children underwent routine upper endoscopy for suspected CD or non-celiac upper abdominal symptoms between August 2008 and December 2014. Blinded to the clinical data and biopsy results, three medical experts visually classified each image as normal mucosa(Marsh-0) or villous atrophy(Marsh-3). The experts' decisions were further integrated into state-of-the-arttexture recognition systems. Using the biopsy results as the reference standard, the classification accuracies of this hybrid approach were compared to the experts' diagnoses in 27 different settings.RESULTS: Compared to the experts' diagnoses, in 24 of 27 classification settings(consisting of three imaging modalities, three endoscopists and three classification approaches), the best overall classification accuracies were obtained with the new hybrid approach. In 17 of 24 classification settings, the improvements achieved with the hybrid approach were statistically significant(P < 0.05). Using the hybrid approach classification accuracies between 94% and 100% were obtained. Whereas the improvements are only moderate in the case of the most experienced expert, the results of the less experienced expert could be improved significantly in 17 out of 18 classification settings. Furthermore, the lowest classification accuracy, based on the combination of one database and one specific expert, could be improved from 80% to 95%(P < 0.001).CONCLUSION: The overall classification performance of medical experts, especially less experienced experts, can be boosted significantly by integrating expert knowledge into computer-aided diagnosis systems.展开更多
The main features and connotation of the tolerance human resource management based on strategy are analyzed and summarized. The theory and method of systematic engineering is used to build the evaluation index systems...The main features and connotation of the tolerance human resource management based on strategy are analyzed and summarized. The theory and method of systematic engineering is used to build the evaluation index systems for the tolerance human resource management. On the basis of it, by using the theory of matter-element analysis, the matter-element models are formulated for the evaluation of the tolerance human resource management. Regarding annual tolerance human resource management as the object of matter-dement, the tolerance human resource ：management for two years are analyzed and evaluated through using the matter. element models proposed. A ease study is carried out and the satisfactory results are obtained. A new scientific methed is provided for the evaluation of human resource management based on strategy.展开更多
Monte Carlo Analysis has been an accepted method for circuit tolerance analysis, but the heavy computational complexity has always prevented its applications. Based on random set theory, this paper presents a simple a...Monte Carlo Analysis has been an accepted method for circuit tolerance analysis, but the heavy computational complexity has always prevented its applications. Based on random set theory, this paper presents a simple and flexible tolerance analysis method to estimate circuit yield. It is the alternative to Monte Carlo analysis, but reduces the number of calculations dramatically.展开更多
The objective of tolerance analysis is to check the extent and nature of variation of an analyzed dimension or geometric feature of interest for a given GD & T scheme. The parametric approach to tolerance analysis...The objective of tolerance analysis is to check the extent and nature of variation of an analyzed dimension or geometric feature of interest for a given GD & T scheme. The parametric approach to tolerance analysis is based on parametric constraint solving. The accuracy of simulation results is dependent on the userdefined modeling scheme. Once an accurate CAD model is developed, it is integrated with tolerance synthesis model. In order to make it cost competent, it is necessary to obtain the costtolerance relationships. The neural network recently has been reported to be an effective statistical tool for determining relationship between input factors and output responses. This study deals development of direct constraint model in CAD, which is integrated to an optimal tolerance design problem. A backpropagation (BP) network is applied to fit the costtolerance relationship. An optimization method based on Differential Evolution (DE) is then used to locate the combination of controllable factors (tolerances) to optimize the output response (manufacturing cost plus quality loss) using the equations stemming from the trained network. A tolerance synthesis problem for a motor assembly is used to investigate the effectiveness and efficiency of the proposed methodology.展开更多
For auto-body product, assembly dimensional quality evaluation using tolerance analysis method is a challenging task because there are plenty of elements impacting on the variation stack-up and propagation during asse...For auto-body product, assembly dimensional quality evaluation using tolerance analysis method is a challenging task because there are plenty of elements impacting on the variation stack-up and propagation during assembly process. Traditional method of dimension chain generation based on tolerance charting technique can not suit the case of auto-body assembly. This paper proposed a method to generate dimension chain based on developing a jot chain model of assembly, which can be integrated with important information needed for variation analysis, such as joints types and assembly sequences. The implementation of such a procedure will contribute to rapid evaluation of body dimensional quality in the design stage.展开更多
Aim： To establish a rat and mouse epididymal map based on the use of the Epiquatre automatic software for histologic image analysis. Methods： Epididymides from five adult rats and five adult mice were fixed in alcoh...Aim： To establish a rat and mouse epididymal map based on the use of the Epiquatre automatic software for histologic image analysis. Methods： Epididymides from five adult rats and five adult mice were fixed in alcoholic Bouin＇s fixative and embedded in paraffin. Serial longitudinal sections through the medial aspect of the organ were cut at 10 jam and stained with hematoxylin and eosin. As determined from major connective tissue septa, nine subdivisions of the rat epididymis and seven for the mouse were determined, consisting of five sub-regions in the caput （rat and mouse）, one （mouse） or three （rat） in the corpus and one in the cauda （rat and mouse）. Using the Epiquatre software, several tubular, luminal and epithelial morphometric parameters were evaluated. Results： Statistical comparison of the quantitative parameters revealed regional differences （2-5 in the rat, 3-6 in the mouse, dependent on parameters） with caput regions 1 and 2 being largely distinguishable from the similar remaining caput and corpus, which were in turn recognizable from the cauda regions in both species. Conclusion： The use of the Epiquatre software allowed us to establish regression curves for different morphometric parameters that can permit the detection of changes in their values under different pathological or experimental conditions. （Asian J Androl 2005 Sep; 7： 267-275）展开更多
This study details the nature and magnitude of the genetic effects associated with various quantitative characters (morphological and hydric relations) measured in maize seedlings during the osmotic phase of saline st...This study details the nature and magnitude of the genetic effects associated with various quantitative characters (morphological and hydric relations) measured in maize seedlings during the osmotic phase of saline stress (100 mM NaCl). Three lines with differential behavior in salt stress: SC2 (tolerant), AFE (susceptible) and LP3 (moderately tolerant) were used to obtain contrasting crosses (SC2 × AFE) and (SC2 × LP3). An analysis of six generational means (P1, P2, F1, F2, BC1 and BC2) was applied for each cross. First a scaling test was applied and then a three and six-parameter genetic models were used to estimate various genetic components. In none of the traits studied there was evidence of adequacy to the three parameter model, which indicates important epistatic effects in genetic expression. The dominant genetic effects were greater than the additive ones for all the characters evaluated. LG showed positive and significant differences for [h] in both crosses, indicating the presence of hybrid vigor and its possible use in the improvement. Low value of [d] and high of [h] both significant in SC2 × AFE, indicates existence of genes dispersion between the parental lines. While, for the cross SC2 × LP3, the low and significant value of [d] and not significant value of [h], indicate greater genetic similarity. In the SC2 × LP3 cross, the negative interaction [l] confirms ambidirectional dominance, while for SC2 × LP3 the positive sign indicates directional dominance. The analysis of tolerance to salinity in the osmotic phase showed a complex polygenic inheritance for the traits used, determined by simple and interaction effects of different magnitudes and significance according to the cross considered.展开更多
Nannochloropsis oceanica is a marine microalgal species with both economic value and biological importance.It grows fast,contains rich oils,reproduces asexually,holds a small and haploidy genome,and is easy to be modi...Nannochloropsis oceanica is a marine microalgal species with both economic value and biological importance.It grows fast,contains rich oils,reproduces asexually,holds a small and haploidy genome,and is easy to be modified genetically.However,the genetic study of N.oceanica is scarce.Very less genetic bases of its traits have been deciphered,and no gene has been isolated from it with the function verified simultaneously via either genetic or reverse genetic approaches or both(de novo cloned).Changing medium salinity may aid to control harmful organisms met during large scale cultivation.As a stress,it may also facilitate the accumulation of desirable chemicals including fatty acids.In order to decipher the genetic basis of the low salinity tolerance of N.oceanica,we mutated N.oceanica with Zeocin.In total,five mutant bulks were constructed at equal number of cells,100 mutants each,which were tolerant to a discontinuous serial of salinities from that of 100%of f/2 to that of a mixture of 4%of f/2 and 94%of BG11.The bulks were genotyped through whole genome re-sequencing and analyzed with bulked mutant analysis(BMA)newly modified from bulked segregant analysis(BSA).In total,47 SNPs and 112 InDels were found to associate with the low salinity tolerance,and around them a set of low salinity tolerance associating genes were identified.A set of annotatable genes commonly found between control and different salinities indicated that the genes functioning in gene expression,energy metabolism and cellular structure may be involved in the low salinity tolerance.These associating molecular markers and genes around them were not enough for outlining the physiological mechanism underlining the tolerance;however they should aid to improve N.oceanica genetically.展开更多
·AIM:To evaluate visual outcomes and changes in fluid after administering monthly anti-vascular endothelial growth factor(VEGF)injections to treat neovascular agerelated macular degeneration(n AMD)with subretinal...·AIM:To evaluate visual outcomes and changes in fluid after administering monthly anti-vascular endothelial growth factor(VEGF)injections to treat neovascular agerelated macular degeneration(n AMD)with subretinal fluid(SRF)and pigment epithelial detachment(PED).·METHODS:This prospective study included eyes with n AMD previously treated with as-needed anti-VEGF injections.The patients were treated with six monthly intravitreal injections of ranibizumab.Quantitative volumetric segmentation analyses of the SRF and PED were performed.The main outcome measures included best-corrected visual acuity(BCVA),and SRF and PED volumes.·RESULTS:Twenty eyes of 20 patients were included in this study.At the 6-month follow-up,BCVA and PED volume did not change significantly(P=0.110 and 0.999,respectively)but the mean SRF volume decreased from 0.53±0.82 mm3 at baseline to 0.08±0.23 mm3(P=0.002).The absorption rate of the SRF volume was negatively correlated with the duration of previous antiVEGF treatment(P=0.029).Seven of the 20 eyes(35%)showed a fluid-free macula and significant improvement in BCVA(P=0.036)by month 6.·CONCLUSION:Quantifying the SRF can precisely determine the patient’s responsiveness to anti-VEGF treatment of n AMD.展开更多
Iron(Fe)toxicity,generated from excess reduced ferrous Fe(Fe^(2+))ion formation within the soil under submerged condition,is a potent environmental stress that limits lowland rice production.Total 11 diverse Thai rice...Iron(Fe)toxicity,generated from excess reduced ferrous Fe(Fe^(2+))ion formation within the soil under submerged condition,is a potent environmental stress that limits lowland rice production.Total 11 diverse Thai rice genotypes,including a recognized tolerant genotype Azucena and a susceptible genotype IR64,were evaluated against 5 Fe^(2+)levels[0(control),150,300,600 and 900 mg/L]to screen the tested genotypes for their Fe-toxicity tolerance and to classify them as a sensitive/tolerant category.The evaluation was conducted by a germination study,followed by a polyhouse study on growth,yield and physiochemical performances.Results showed significant variations in Fe^(2+)-tolerance across genotypes.Increasing Fe^(2+)level beyond 300 mg/L was detrimental for germination and growth of all the tested genotypes,although germination responses were negatively affected at Fe^(2+)≥300 mg/L.Physiochemical responses in the form of leaf greenness,net photosynthetic rate,membrane stability index and Fe contents in leaf and root were the most representative of Fe^(2+)-toxicity-mediated impairments on overall growth and yield.Difference in physiochemical responses was effectively correlated with the contrasting ability of the genotypes on lowering excess Fe^(2+)in tissues.Analysis of average tolerance and stress tolerance index unveiled that the genotypes RD85 and RD31 were the closest to the tolerant check Azucena and the sensitive check IR64,respectively.The unweighted pair group method with arithmetic means clustering revealed three major clusters,with cluster Ⅱ(four genotypes)being Fe^(2+)tolerant and cluster Ⅰ(four genotypes)being Fe^(2+)sensitive.Principal component(PC)analysis and genotype by trait-biplot analysis showed that the first two components explained 90.5%of the total variation,with PC1 accounting for 56.6%and PC2 for 33.9%of the total variation.The identified tolerant rice genotypes show potentials for cultivation in Fe^(2+)-toxic lowlands for increased productivity.The findings contribute to the present understanding on Fe^(2+)-toxicity response and provide a basis for future genotype selection or rice crop improvement programs against Fe^(2+)-toxicity.展开更多
[Objective] This study was conducted to identify the drought tolerance of peanut（Arachis hypogaea） seedlings. [Method] The plant height, fresh weight and dry weight of 80 peanut varieties or lines were determined un...[Objective] This study was conducted to identify the drought tolerance of peanut（Arachis hypogaea） seedlings. [Method] The plant height, fresh weight and dry weight of 80 peanut varieties or lines were determined under the drought stress simulated using 15% PEG6000 in laboratory. Relative values of the three indices were calculated to measure the drought tolerance of the 80 peanut varieties or lines. [Result] The growth of peanut seedlings was significantly inhibited after 10 d of drought treatment. Cluster analysis revealed that at Euclidean distance D=15, the80 peanut varieties or lines were divided into four categories A, B, C and D. Among them, category B had better drought tolerance while category C was sensitive to drought. In all the four categories, the approved peanut varieties or lines showed better drought tolerance than the unapproved ones. [Conclusion] The drought tolerant and the drought sensitive peanut varieties or lines screened in this study can be used for further basic research and germplasm improvement.展开更多
The inner and outer oil film dynamic characteristic coefficients of floating ring bearings（FRBs） change due to the manufacturing tolerance of the floating ring, journal and intermediate, which leads to high-speed tu...The inner and outer oil film dynamic characteristic coefficients of floating ring bearings（FRBs） change due to the manufacturing tolerance of the floating ring, journal and intermediate, which leads to high-speed turbocharger＇s vibration too large and even causes nonlinear vibration accident. However, the investigation of floating ring bearing manufacturing tolerance clearance on the rotordynamic characteristics is less at present. In order to study the influence law of inner and outer clearance on turbocharger vibration, the rotor dynamic motion equations of turbocharger supported in FRBs are derived by analyzing the size relations between floating ring, journal and intermediate for the inner and outer oil film clearances, the time transient response analysis for combination of FRBs clearance are developed. A realistic turbocharger is taken as a research object, the FE model of the turbocharger with FRBs is modeled. Under the conditions of four kinds of limit state bearing clearances for inner and outer oil film, the nonlinear transient analyses are performed based on the established FE dynamic models of the nonlinear rotor-FRBs system applied incentive combinations of gravity and unbalance force, respectively. From the waterfall, the simulation results show that the speed for the appearance of fractional frequency is not identical and the amplitude magnitude is different under the four kinds of bearing manufacturing tolerance limit clearances, and fractional frequency does not appear in the turbocharger and the amplitude is minimum under the ODMin/IDMax bearing manufacturing tolerance clearances. The turbocharger vibration is reduced by controlling the manufacturing tolerance clearance combinations of FRBs, which is helpful for the dynamic design and production-manufacturing of high-speed turbocharger.展开更多
Deformation and dislocations of segments of shield tunnel in construction stage have apparent effect on tunnel structure stress and even cause local cracks and breakage in tunnel. 3D finite element method was used to ...Deformation and dislocations of segments of shield tunnel in construction stage have apparent effect on tunnel structure stress and even cause local cracks and breakage in tunnel. 3D finite element method was used to analyze two segment ring models under uniform injected pressure: (1) segment ring without wedge-shaped segment, which has 16 types of preinstall erection tolerance; (2) segment ring with wedge-shaped segment, which has no preinstall erection tolerance. The analysis results indicate that different erection tolerances can cause irregular deformation in segment ring under uniform injected pressure, and that the tolerance values are enlarged further. Wedge-shaped segment apparently affects the overall deformation of segment ring without erection tolerances. The uniform injected pressure can cause deformation of ring with wedge-shaped segment irregular, and dislocations also appear in this situation. The stress of segment with erection tolerances is much larger than that of segment without erection tolerances. Enlarging the central angle of wedge-shaped segment can make the irregular deformation and dis- locations of segments smaller. The analysis results also provide basis for erection tolerance control and improvement of segment constitution.展开更多
基金Supported by"11thFive-Year Plan"National Science and Technology Support Program(2009BADA4B01-3)~~
文摘[Objectivc] This study aimed to investigate the chilling tolerance of seedlings of different cotton genotypes and screen appropriate indicators for assess- ing chilling tolerance, to establish reliable mathematical evaluation model for chilling tolerance of cotton, thus providing theoretical basis for breeding and promoting new chilling-tolerant cotton germplasms and large-scale evaluation of chilling tolerance of cotton varieties. [Method] Fifteen cotton varieties （lines） were used as experimental materials. The photosynthetic gas exchange parameters, chlorophyll fluorescence ki- netic parameters, chlorophyll content, relative soluble sugar content, malonaldehyde content, relative proiine content, relative conductivity and other 12 physiological indi- cators of seedling leaves under low temperature treatment （5 ℃, 12 h） and recovery treatment （25 ℃. 24 h） were determined; based on the chilling tolerance coefficient （CTC） of various individual indicators, the comprehensive evaluation of chilling toler- ance was conducled by using principal component analysis, hierarchical cluster anal- ysis and stepwise regression analysis. [Result] The results showed that the 12 indi- vidual physiological indicators could be classified into 7 independent comprehensive components by principal component analysis; 15 cotton varieties （lines） were clus- tered into three categories by using membership function method and hierarchical cluster analysis; the mathematical model for evaluating chilling tolerance of cotton seedlings was established： D =0.275 -0.244Fo1 ＋0.206Fv/Fm1＋0.326g,%-0.056SS ＋ 0.225MDA＋O.O38REC （FF=0.995）, and the evaluation accuracy of the equation was higher than 94.25%,0. Six identification indicators closely related to chilling tolerance were screened, including Fo,, Fv/Fm1, Seedling leaves of cotton varieties （lines） gs2, SS, MDA, and REC. [Conclusion] with high chilling tolerance are less dam- aged under low temperature stress, and are able to maintain relatively high photo- synthetic electron transport capacity and high stomatal conductance after recovery treatment, which is contributed to gas exchange and recovery of photosynthetic ca- pacity. Determination of the six indicators under the same stress condition can be adopted for rapid identification and prediction of the chilling tolerance of other cotton varieties, which provides basis for the breeding, promotion, identification and screen- ing of chilling tolerant germplasms.
基金Supported by Fujian Juncao Ecological Industry Collaborative Innovation Tackling Key Subject(JCXTGG22)Technical Demonstration Project of Ministry of Water Resources(SF-201603)+1 种基金Scientific and Technological Development Project of Fujian Agriculture and Forestry University(KF2015112)Natural Science Foundation of Fujian Province(2015J01153)~~
文摘The drought resistance of Pennisetum sp. was analyzed under different drought stress conditions simulated by various concentrations of PEG-6000. Changesofa series of indexes such as chlorophyll content, water content, relative electrical conductivity of osmotic solution, MDA content, proline content, soluble polysaccharide content and soluble protein content in the leaves were measured.The correlation of these indexes with the drought resistance of Pennisetum sp. was an- alyzed by the method of grey correlation analysis. The results showed that the chlorophyll, water content, relative electrical conductivity and soluble protein con- tentexhibited obvious negative correlation with the stress concentration, which de- creasedfollowing the increase of PEG-6000 concentration. The soluble polysaccha- ride contentshowed an increasing trend,the MDA content showed a rise at first fol- lowed by a declinetrend, while the prolinecontent was just opposite to MDA. The changes of the 3 indexes showed obvious positive correlation with thestress con- centration. The correlation of these indexes with the drought resistance of Pennise- tum sp. were ranked as follows： leaf water content （0.980 8）, chlorophyll content （0.967 9）, MDA content （0.876 0）, soluble polysaccharide content （0.839 5）, soluble protein content（0.827 5）, relative electrical conductivity of osmotic solution（0.670 8）, and proline content（0.571 3）.
基金Bhakta Kavi Narsinh Mehta University for providing support through the SCORE(Scheme for Concurrent Research Enhancement-2023),Department of Life Sciences,Junagadh.
文摘The manuscript explores the complex interplay between groundnut genotypes,salt tolerance and hormonal influence,shedding light on the dynamic responses of three specific groundnut genotypes,KDG-128,TG-37 A and GG-20,to salt treatments and gibberellic acid(GA3).The study encompasses germination,plant growth,total protein content and oil content as key parameters.Through comprehensive analysis,it identifies TG-37 A and KDG-128 as salt-tolerant genotypes,and GG-20 as salt-susceptible genotypes,which highlighting the potential for targeted breeding efforts to develop more resilient groundnut varieties.Moreover,the quantification of protein and oil content under different treatments provides vital data for optimizing nutritional profiles in groundnut cultivars.Principal Component Analysis(PCA) underscores the significance of the first principal component(PC1)in explaining the majority of variance,capturing primary trends and differences in plant length.Analysis of Variance(ANOVA) and hierarchical analysis confirm the presence of statistically significant differences in protein and oil content among the genotypes.Pearson's correlation coefficient matrix analysis reveals strong positive correlations between plant length and protein content,plant length and oil content,and a moderately positive correlation between protein content and oil content.These findings provide valuable insights into groundnut physiology,salt tolerance,and nutritional composition,with implications for future research in sustainable agriculture and crop improvement.
文摘Tolerance analysis is investigated under an environment of concurrent design in order to lead to optimized tolerance, as traditional tolerance analysis is often inefficient and liable to mistakes. Making full use of knowledge in manufacturing tolerance analysis combined with the beta distribution model is introduced and applied. The use of beta distribution reflects fully actual capabilities in manufacture. Concurrent tolerance design is a manufacturing environment oriented design process paying more attention to influences or restraints on product design caused by such factors as the manufacturing process, machine capabilities, economy in manufacturing, etc. Process environment oriented tolerance analysis is more flexible making the designed results more practical and effective.
基金supported by the National Natural Science Foundation of China (30500315)Transformation of Agricultural Scientific and Technological Achievements Program from the Ministry of Science and Technology of China (05EFN214300193)Educational Foundation of Hunan Province,China (07C360)
文摘The study was undertaken to assess the genetic effect of quantitative trait loci （QTLs） conferring heat tolerance at flowering stage in rice. A population consisting of 279 F2 individuals from the cross between 996, a heat tolerant cultivar and 4628, a heat-sensitive cultivar, was analyzed for their segregation pattern of the difference of seed set rate under optimal temperature condition and high temperature condition. The difference of seed set rate under optimal temperature condition and high temperature condition showed normal distribution, indicating the polygenic control over the trait. To identify main effect of QTL for heat tolerance, the parents were surveyed with 200 primer pairs of simple sequence repeats （SSR）. The parental survey revealed 30% polymorphism between parents. In order to detect the main QTL association with heat tolerance, a strategy of combining the DNA pooling from selected segregants and genotyping was adopted. The association of putative markers identified based on DNA pooling from selected segregants was established by single marker analysis （SMA）. The results of SMA revealed that SSR markers, RM3735 on chromosome 4 and RM3586 on chromosome 3 showed significant association with heat tolerance respectively, accounted for 17 and 3% of the total variation respectively. The heat tolerance during flowering stage in rice was controlled by multiple gene. The SSR markers, RM3735 on chromosome 4 and RM3586 on chromosome 3 showed significant association with heat tolerance respectively, accounted for 17 and 3% of the total variation respectively. The two genetic loci, especially for RM3735 on chromosome 4, can be used in marker-assistant-selected method in heat tolerance breeding in rice.
文摘Electromagnetic relay in aerospace is one of the main electronic components in aerospace electronic systems for information transfer, control and power distribution, and its reliability will influence the reliability of the whole aerospace electronic systems. Reliability design is the key technique of electromagnetic relay reliability engineering. This paper synthetically analyzes the present reliability design methods, and presents the reliability tolerance analyzing mathematic models of electromagnetic force basing on orthogonal design, mechanical spring force basing on probability statistics theory, and matching characteristics of electromagnetic force and mechanical spring force basing on method of stressstrength interference. Some instructive conclusions are draw by researching on the reliability tolerance of some type electromagnetic relay in aerospace.
文摘Tolerance analysis of a planetary reducer is conducted. By focusing the serially-arranged parts in the central line and setting an appropriate dimension as a “gap”, worst-case tolerance analysis method and statistical （RSS） tolerance analysis are used, and then a tolerance-analyzing tool CE/TOL is introduced. The acceptable value range of the “gap” is from 1.5 mm to 3.5 mm. While worst-case analysis rejects the design, RSS accepts it by a more realistic result with the law of probability accounted. With the help of CE/TOL and CAD software Pro/E, all components＇ dimensions and tolerances are assigned and modified, and more detailed and more comprehensible results are gives out.
基金Supported by the Austrian Science Fund(FWF),No.KLI 429-B13 to Vécsei A
文摘AIM: To further improve the endoscopic detection of intestinal mucosa alterations due to celiac disease(CD).METHODS: We assessed a hybrid approach based on the integration of expert knowledge into the computerbased classification pipeline. A total of 2835 endoscopic images from the duodenum were recorded in 290 children using the modified immersion technique(MIT). These children underwent routine upper endoscopy for suspected CD or non-celiac upper abdominal symptoms between August 2008 and December 2014. Blinded to the clinical data and biopsy results, three medical experts visually classified each image as normal mucosa(Marsh-0) or villous atrophy(Marsh-3). The experts' decisions were further integrated into state-of-the-arttexture recognition systems. Using the biopsy results as the reference standard, the classification accuracies of this hybrid approach were compared to the experts' diagnoses in 27 different settings.RESULTS: Compared to the experts' diagnoses, in 24 of 27 classification settings(consisting of three imaging modalities, three endoscopists and three classification approaches), the best overall classification accuracies were obtained with the new hybrid approach. In 17 of 24 classification settings, the improvements achieved with the hybrid approach were statistically significant(P < 0.05). Using the hybrid approach classification accuracies between 94% and 100% were obtained. Whereas the improvements are only moderate in the case of the most experienced expert, the results of the less experienced expert could be improved significantly in 17 out of 18 classification settings. Furthermore, the lowest classification accuracy, based on the combination of one database and one specific expert, could be improved from 80% to 95%(P < 0.001).CONCLUSION: The overall classification performance of medical experts, especially less experienced experts, can be boosted significantly by integrating expert knowledge into computer-aided diagnosis systems.
文摘The main features and connotation of the tolerance human resource management based on strategy are analyzed and summarized. The theory and method of systematic engineering is used to build the evaluation index systems for the tolerance human resource management. On the basis of it, by using the theory of matter-element analysis, the matter-element models are formulated for the evaluation of the tolerance human resource management. Regarding annual tolerance human resource management as the object of matter-dement, the tolerance human resource ：management for two years are analyzed and evaluated through using the matter. element models proposed. A ease study is carried out and the satisfactory results are obtained. A new scientific methed is provided for the evaluation of human resource management based on strategy.
基金the National Natural Science Foundation of China (No.60772006, 60434020)the Zhejiang Natural Science Foundation (No.R106745, Y1080422).
文摘Monte Carlo Analysis has been an accepted method for circuit tolerance analysis, but the heavy computational complexity has always prevented its applications. Based on random set theory, this paper presents a simple and flexible tolerance analysis method to estimate circuit yield. It is the alternative to Monte Carlo analysis, but reduces the number of calculations dramatically.
文摘The objective of tolerance analysis is to check the extent and nature of variation of an analyzed dimension or geometric feature of interest for a given GD & T scheme. The parametric approach to tolerance analysis is based on parametric constraint solving. The accuracy of simulation results is dependent on the userdefined modeling scheme. Once an accurate CAD model is developed, it is integrated with tolerance synthesis model. In order to make it cost competent, it is necessary to obtain the costtolerance relationships. The neural network recently has been reported to be an effective statistical tool for determining relationship between input factors and output responses. This study deals development of direct constraint model in CAD, which is integrated to an optimal tolerance design problem. A backpropagation (BP) network is applied to fit the costtolerance relationship. An optimization method based on Differential Evolution (DE) is then used to locate the combination of controllable factors (tolerances) to optimize the output response (manufacturing cost plus quality loss) using the equations stemming from the trained network. A tolerance synthesis problem for a motor assembly is used to investigate the effectiveness and efficiency of the proposed methodology.
基金National Natural Science Foundation of China(No.50375092)
文摘For auto-body product, assembly dimensional quality evaluation using tolerance analysis method is a challenging task because there are plenty of elements impacting on the variation stack-up and propagation during assembly process. Traditional method of dimension chain generation based on tolerance charting technique can not suit the case of auto-body assembly. This paper proposed a method to generate dimension chain based on developing a jot chain model of assembly, which can be integrated with important information needed for variation analysis, such as joints types and assembly sequences. The implementation of such a procedure will contribute to rapid evaluation of body dimensional quality in the design stage.
文摘Aim： To establish a rat and mouse epididymal map based on the use of the Epiquatre automatic software for histologic image analysis. Methods： Epididymides from five adult rats and five adult mice were fixed in alcoholic Bouin＇s fixative and embedded in paraffin. Serial longitudinal sections through the medial aspect of the organ were cut at 10 jam and stained with hematoxylin and eosin. As determined from major connective tissue septa, nine subdivisions of the rat epididymis and seven for the mouse were determined, consisting of five sub-regions in the caput （rat and mouse）, one （mouse） or three （rat） in the corpus and one in the cauda （rat and mouse）. Using the Epiquatre software, several tubular, luminal and epithelial morphometric parameters were evaluated. Results： Statistical comparison of the quantitative parameters revealed regional differences （2-5 in the rat, 3-6 in the mouse, dependent on parameters） with caput regions 1 and 2 being largely distinguishable from the similar remaining caput and corpus, which were in turn recognizable from the cauda regions in both species. Conclusion： The use of the Epiquatre software allowed us to establish regression curves for different morphometric parameters that can permit the detection of changes in their values under different pathological or experimental conditions. （Asian J Androl 2005 Sep; 7： 267-275）
文摘This study details the nature and magnitude of the genetic effects associated with various quantitative characters (morphological and hydric relations) measured in maize seedlings during the osmotic phase of saline stress (100 mM NaCl). Three lines with differential behavior in salt stress: SC2 (tolerant), AFE (susceptible) and LP3 (moderately tolerant) were used to obtain contrasting crosses (SC2 × AFE) and (SC2 × LP3). An analysis of six generational means (P1, P2, F1, F2, BC1 and BC2) was applied for each cross. First a scaling test was applied and then a three and six-parameter genetic models were used to estimate various genetic components. In none of the traits studied there was evidence of adequacy to the three parameter model, which indicates important epistatic effects in genetic expression. The dominant genetic effects were greater than the additive ones for all the characters evaluated. LG showed positive and significant differences for [h] in both crosses, indicating the presence of hybrid vigor and its possible use in the improvement. Low value of [d] and high of [h] both significant in SC2 × AFE, indicates existence of genes dispersion between the parental lines. While, for the cross SC2 × LP3, the low and significant value of [d] and not significant value of [h], indicate greater genetic similarity. In the SC2 × LP3 cross, the negative interaction [l] confirms ambidirectional dominance, while for SC2 × LP3 the positive sign indicates directional dominance. The analysis of tolerance to salinity in the osmotic phase showed a complex polygenic inheritance for the traits used, determined by simple and interaction effects of different magnitudes and significance according to the cross considered.
基金Supported by the National Key R&D Program of China(Nos.2018YFD0900305,2018YFD0901506)the Marine S&T Fund of Shandong Province for Pilot National Laboratory for Marine Science and Technology(Qingdao)(No.2018SDKJ0406-3)the Fundamental Research Funds for the Central Universities(No.201762017)。
文摘Nannochloropsis oceanica is a marine microalgal species with both economic value and biological importance.It grows fast,contains rich oils,reproduces asexually,holds a small and haploidy genome,and is easy to be modified genetically.However,the genetic study of N.oceanica is scarce.Very less genetic bases of its traits have been deciphered,and no gene has been isolated from it with the function verified simultaneously via either genetic or reverse genetic approaches or both(de novo cloned).Changing medium salinity may aid to control harmful organisms met during large scale cultivation.As a stress,it may also facilitate the accumulation of desirable chemicals including fatty acids.In order to decipher the genetic basis of the low salinity tolerance of N.oceanica,we mutated N.oceanica with Zeocin.In total,five mutant bulks were constructed at equal number of cells,100 mutants each,which were tolerant to a discontinuous serial of salinities from that of 100%of f/2 to that of a mixture of 4%of f/2 and 94%of BG11.The bulks were genotyped through whole genome re-sequencing and analyzed with bulked mutant analysis(BMA)newly modified from bulked segregant analysis(BSA).In total,47 SNPs and 112 InDels were found to associate with the low salinity tolerance,and around them a set of low salinity tolerance associating genes were identified.A set of annotatable genes commonly found between control and different salinities indicated that the genes functioning in gene expression,energy metabolism and cellular structure may be involved in the low salinity tolerance.These associating molecular markers and genes around them were not enough for outlining the physiological mechanism underlining the tolerance;however they should aid to improve N.oceanica genetically.
文摘·AIM:To evaluate visual outcomes and changes in fluid after administering monthly anti-vascular endothelial growth factor(VEGF)injections to treat neovascular agerelated macular degeneration(n AMD)with subretinal fluid(SRF)and pigment epithelial detachment(PED).·METHODS:This prospective study included eyes with n AMD previously treated with as-needed anti-VEGF injections.The patients were treated with six monthly intravitreal injections of ranibizumab.Quantitative volumetric segmentation analyses of the SRF and PED were performed.The main outcome measures included best-corrected visual acuity(BCVA),and SRF and PED volumes.·RESULTS:Twenty eyes of 20 patients were included in this study.At the 6-month follow-up,BCVA and PED volume did not change significantly(P=0.110 and 0.999,respectively)but the mean SRF volume decreased from 0.53±0.82 mm3 at baseline to 0.08±0.23 mm3(P=0.002).The absorption rate of the SRF volume was negatively correlated with the duration of previous antiVEGF treatment(P=0.029).Seven of the 20 eyes(35%)showed a fluid-free macula and significant improvement in BCVA(P=0.036)by month 6.·CONCLUSION:Quantifying the SRF can precisely determine the patient’s responsiveness to anti-VEGF treatment of n AMD.
基金the National Science and Technology Development Agency,Thailand(Grant No.P-18-51456)。
文摘Iron(Fe)toxicity,generated from excess reduced ferrous Fe(Fe^(2+))ion formation within the soil under submerged condition,is a potent environmental stress that limits lowland rice production.Total 11 diverse Thai rice genotypes,including a recognized tolerant genotype Azucena and a susceptible genotype IR64,were evaluated against 5 Fe^(2+)levels[0(control),150,300,600 and 900 mg/L]to screen the tested genotypes for their Fe-toxicity tolerance and to classify them as a sensitive/tolerant category.The evaluation was conducted by a germination study,followed by a polyhouse study on growth,yield and physiochemical performances.Results showed significant variations in Fe^(2+)-tolerance across genotypes.Increasing Fe^(2+)level beyond 300 mg/L was detrimental for germination and growth of all the tested genotypes,although germination responses were negatively affected at Fe^(2+)≥300 mg/L.Physiochemical responses in the form of leaf greenness,net photosynthetic rate,membrane stability index and Fe contents in leaf and root were the most representative of Fe^(2+)-toxicity-mediated impairments on overall growth and yield.Difference in physiochemical responses was effectively correlated with the contrasting ability of the genotypes on lowering excess Fe^(2+)in tissues.Analysis of average tolerance and stress tolerance index unveiled that the genotypes RD85 and RD31 were the closest to the tolerant check Azucena and the sensitive check IR64,respectively.The unweighted pair group method with arithmetic means clustering revealed three major clusters,with cluster Ⅱ(four genotypes)being Fe^(2+)tolerant and cluster Ⅰ(four genotypes)being Fe^(2+)sensitive.Principal component(PC)analysis and genotype by trait-biplot analysis showed that the first two components explained 90.5%of the total variation,with PC1 accounting for 56.6%and PC2 for 33.9%of the total variation.The identified tolerant rice genotypes show potentials for cultivation in Fe^(2+)-toxic lowlands for increased productivity.The findings contribute to the present understanding on Fe^(2+)-toxicity response and provide a basis for future genotype selection or rice crop improvement programs against Fe^(2+)-toxicity.
基金Supported by the Agricultural Science Independent Innovation Foundation of Jiangsu Province[CX(12)5089]~~
文摘[Objective] This study was conducted to identify the drought tolerance of peanut（Arachis hypogaea） seedlings. [Method] The plant height, fresh weight and dry weight of 80 peanut varieties or lines were determined under the drought stress simulated using 15% PEG6000 in laboratory. Relative values of the three indices were calculated to measure the drought tolerance of the 80 peanut varieties or lines. [Result] The growth of peanut seedlings was significantly inhibited after 10 d of drought treatment. Cluster analysis revealed that at Euclidean distance D=15, the80 peanut varieties or lines were divided into four categories A, B, C and D. Among them, category B had better drought tolerance while category C was sensitive to drought. In all the four categories, the approved peanut varieties or lines showed better drought tolerance than the unapproved ones. [Conclusion] The drought tolerant and the drought sensitive peanut varieties or lines screened in this study can be used for further basic research and germplasm improvement.
基金Supported by National Natural Science Foundation of China(Grant Nos.51205121,51375162)Scientific Research Foundation of Hunan Provincial Education Department of China(Grant No.13A023)Postgraduate Innovation Foundation of Hunan University of Science and Technology,China(Grant No.S140020)
文摘The inner and outer oil film dynamic characteristic coefficients of floating ring bearings（FRBs） change due to the manufacturing tolerance of the floating ring, journal and intermediate, which leads to high-speed turbocharger＇s vibration too large and even causes nonlinear vibration accident. However, the investigation of floating ring bearing manufacturing tolerance clearance on the rotordynamic characteristics is less at present. In order to study the influence law of inner and outer clearance on turbocharger vibration, the rotor dynamic motion equations of turbocharger supported in FRBs are derived by analyzing the size relations between floating ring, journal and intermediate for the inner and outer oil film clearances, the time transient response analysis for combination of FRBs clearance are developed. A realistic turbocharger is taken as a research object, the FE model of the turbocharger with FRBs is modeled. Under the conditions of four kinds of limit state bearing clearances for inner and outer oil film, the nonlinear transient analyses are performed based on the established FE dynamic models of the nonlinear rotor-FRBs system applied incentive combinations of gravity and unbalance force, respectively. From the waterfall, the simulation results show that the speed for the appearance of fractional frequency is not identical and the amplitude magnitude is different under the four kinds of bearing manufacturing tolerance limit clearances, and fractional frequency does not appear in the turbocharger and the amplitude is minimum under the ODMin/IDMax bearing manufacturing tolerance clearances. The turbocharger vibration is reduced by controlling the manufacturing tolerance clearance combinations of FRBs, which is helpful for the dynamic design and production-manufacturing of high-speed turbocharger.
文摘Deformation and dislocations of segments of shield tunnel in construction stage have apparent effect on tunnel structure stress and even cause local cracks and breakage in tunnel. 3D finite element method was used to analyze two segment ring models under uniform injected pressure: (1) segment ring without wedge-shaped segment, which has 16 types of preinstall erection tolerance; (2) segment ring with wedge-shaped segment, which has no preinstall erection tolerance. The analysis results indicate that different erection tolerances can cause irregular deformation in segment ring under uniform injected pressure, and that the tolerance values are enlarged further. Wedge-shaped segment apparently affects the overall deformation of segment ring without erection tolerances. The uniform injected pressure can cause deformation of ring with wedge-shaped segment irregular, and dislocations also appear in this situation. The stress of segment with erection tolerances is much larger than that of segment without erection tolerances. Enlarging the central angle of wedge-shaped segment can make the irregular deformation and dis- locations of segments smaller. The analysis results also provide basis for erection tolerance control and improvement of segment constitution.
