Progress in the fast charging of high-capacity silicon monoxide(SiO)-based anode is currently hindered by insufficient conductivity and notable volume expansion.The construction of an interface conductive network effe...Progress in the fast charging of high-capacity silicon monoxide(SiO)-based anode is currently hindered by insufficient conductivity and notable volume expansion.The construction of an interface conductive network effectively addresses the aforementioned problems;however,the impact of its quality on lithium-ion transfer and structure durability is yet to be explored.Herein,the influence of an interface conductive network on ionic transport and mechanical stability under fast charging is explored for the first time.2D modeling simulation and Cryo-transmission electron microscopy precisely reveal the mitigation of interface polarization owing to a higher fraction of conductive inorganic species formation in bilayer solid electrolyte interphase is mainly responsible for a linear decrease in ionic diffusion energy barrier.Furthermore,atomic force microscopy and Raman shift exhibit substantial stress dissipation generated by a complete conductive network,which is critical to the linear reduction of electrode residual stress.This study provides insights into the rational design of optimized interface SiO-based anodes with reinforced fast-charging performance.展开更多
Highly conductive polymer composites(CPCs) with excellent mechanical flexibility are ideal materials for designing excellent electromagnetic interference(EMI) shielding materials,which can be used for the electromagne...Highly conductive polymer composites(CPCs) with excellent mechanical flexibility are ideal materials for designing excellent electromagnetic interference(EMI) shielding materials,which can be used for the electromagnetic interference protection of flexible electronic devices.It is extremely urgent to fabricate ultra-strong EMI shielding CPCs with efficient conductive networks.In this paper,a novel silver-plated polylactide short fiber(Ag@PL ASF,AAF) was fabricated and was integrated with carbon nanotubes(CNT) to construct a multi-scale conductive network in polydimethylsiloxane(PDMS) matrix.The multi-scale conductive network endowed the flexible PDMS/AAF/CNT composite with excellent electrical conductivity of 440 S m-1and ultra-strong EMI shielding effectiveness(EMI SE) of up to 113 dB,containing only 5.0 vol% of AAF and 3.0 vol% of CNT(11.1wt% conductive filler content).Due to its excellent flexibility,the composite still showed 94% and 90% retention rates of EMI SE even after subjected to a simulated aging strategy(60℃ for 7 days) and 10,000 bending-releasing cycles.This strategy provides an important guidance for designing excellent EMI shielding materials to protect the workspace,environment and sensitive circuits against radiation for flexible electronic devices.展开更多
Black phosphorus has been recognized as a prospective candidate anode material for sodium-ion batteries(SIBs)due to its ultrahigh theoretical capacity of 2596 mA·h/g and high electric conductivity of≈300 S/m.How...Black phosphorus has been recognized as a prospective candidate anode material for sodium-ion batteries(SIBs)due to its ultrahigh theoretical capacity of 2596 mA·h/g and high electric conductivity of≈300 S/m.However,its large volume expansion and contraction during sodiation/desodiation lead to poor cycling stability.In this work,a BP/graphite nanoparticle/nitrogen-doped multiwalled carbon nanotubes(BP/G/CNTs)composite with a dual-carbon conductive network is successfully fabricated as a promising anode material for SIBs through a simple two-step mechanical milling process.The unique structure can mitigate the eff ect of volume changes and provide additional electron conduction pathways during cycles.Furthermore,the formation of P–O–C bonds helps maintain the intimate connection between phosphorus and carbon,thereby improving the cycling and rate performance.As a result,the BP/G/CNTs composite delivers a high initial Coulombic efficiency(89.6%)and a high specific capacity for SIBs(1791.3 mA·h/g after 100 cycles at 519.2 mA/g and 1665.2 mA·h/g after 100 cycles at 1298 mA/g).Based on these results,the integrated strategy of one-and two-dimensional carbon materials can guide other anode materials for SIBs.展开更多
Vanadium dioxide(VO_(2)) with the advantages of high theoretical capacity and tunnel structure has attracted considerable promising candidates for aqueous zinc-ion batteries.Nevertheless,the intrinsic low electronic c...Vanadium dioxide(VO_(2)) with the advantages of high theoretical capacity and tunnel structure has attracted considerable promising candidates for aqueous zinc-ion batteries.Nevertheless,the intrinsic low electronic conductivity of VO_(2) results in an unsatisfactory electrochemical performance.Herein,a flower-like VO_(2)/carbon nanotubes(CNTs)composite was obtained by a facile hydrothermal method.The unique flower-like morphology shortens the ion transport length and facilitates electrolyte infiltration.Meanwhile,the CNT conductive networks is in favor of fast electron transfer.A highly reversible zinc storage mechanism was revealed by ex-situ X-ray diffraction and X-ray photoelectron spectroscopy.As a result,the VO_(2)/CNTs cathode exhibits a high reversible capacity(410 mAh·g^(−1)),superior rate performance(305 mAh·g^(−1)at 5 A·g^(−1)),and excellent cycling stability(a reversible capacity of 221 mAh·g^(−1)was maintained even after 2000 cycles).This work provides a guide for the design of high-performance cathode materials for aqueous zinc metal batteries.展开更多
KTi_(2)(PO_(4))_(3)is a promising anode material for potassium storage,but suffers from low conductivity and difficult balance between high capacity and good structural stability.Herein,the Ti_(3)C_(2)T_(x)MXene is us...KTi_(2)(PO_(4))_(3)is a promising anode material for potassium storage,but suffers from low conductivity and difficult balance between high capacity and good structural stability.Herein,the Ti_(3)C_(2)T_(x)MXene is used as a multifunctional binder to fabricate the KTi_(2)(PO_(4))_(3)electrode by the traditional homogenizing-coating method.The MXene nanosheets,together with the conductive agent super P nanoparticles,construct a multiple conductive network for fast electron/ion transfer and high electrochemical kinet-ics.Moreover,the network ensures the structural stability of the KTi_(2)(PO_(4))_(3)electrode during the de-intercalation/intercalation of 4 K^(+)ions,which is beneficial for simultaneously achieving high capacity and good cycle performance.Therefore,the MXene-bonded KTi_(2)(PO_(4))_(3)electrode delivers a reversible capacity of 255.2 mAh/g at 50 mA/g,outstanding rate capability with 132.3 mAh/g at 2 A/g,and ex-cellent cycle performance with 151.6 mAh/g at 1 A/g after 2000 cycles.This work not only suggests a high-performance anode material for potassium-ion batteries,but also demonstrates that the MXene is a promising binder material for constructing conductive electrodes in rechargeable batteries.展开更多
High-frequency electromagnetic waves and electronic products can bring great convenience to people’s life,but lead to a series of electromagnetic interference(EMI)problems,such as great potential dangers to the norma...High-frequency electromagnetic waves and electronic products can bring great convenience to people’s life,but lead to a series of electromagnetic interference(EMI)problems,such as great potential dangers to the normal operation of elec-tronic components and human safety.Therefore,the research of EMI shield-ing materials has attracted extensive attention by the scholars.Among them,polymer-based EMI shielding materials with light weight,high specific strength,and stable properties have become the current mainstream.The construction of 3D conductive networks has proved to be an effective method for the prepara-tion of polymer-based EMI shielding materials with excellent shielding effective-ness(SE).In this paper,the shielding mechanism of polymer-based EMI shield-ing materials with 3D conductive networks is briefly introduced,with emphasis on the preparation methods and latest research progress of polymer-based EMI shielding materials with different 3D conductive networks.The key scientific and technical problems to be solved in the field of polymer-based EMI shielding materials are also put forward.Finally,the development trend and application prospects of polymer-based EMI shielding materials are prospected.展开更多
Contolling the formation of the conductive network in the polymer nanocomposites(PNCs)is very meaningful to enhance their electrical property.In this work,we investigated the effect of grafted nanoparticles(NPs)on the...Contolling the formation of the conductive network in the polymer nanocomposites(PNCs)is very meaningful to enhance their electrical property.In this work,we investigated the effect of grafted nanoparticles(NPs)on the conductive probability of PNCs in the quiescent state as well as under the shear field via a coarse grained molecular dynamics simulation.It is found that the smallest percolation threshold is realized at the moderate grafting density,the moderate length of grafted chains or the moderate interaction between grafted chains and free chains.Corresponding to it,the dispersion state of NPs varies from the contact aggregation to the uniform dispersion.By analyzing the connection mode among NPs,the probabilty of NPs which connect three other ones reaches the maximum value at their moderate dispersion state which is responsible for the optimal conductive probability.In addition,the main cluster size is characterized to better understand the conductive network which is consistent with the percolation threshold.It is interesting to find that the percolation threshold is smaller under the shear field than under the quiescent state.The shear field induces more NPs which connect three other ones.This benefits the formation of the new conductive network.Meanwhile,the anisotropy of the conductive probability is reduced with increasing the grafting density.In summary,this work provides a clear picture on how the conductive network of grafted NPs evolves under the shear field.展开更多
Currently,the practical application of SiO_(x) still has a huge hindrance in the area of lithium ion battery,because it is unable to achieve an effective contact with surrounding conducting materials,resulting in fail...Currently,the practical application of SiO_(x) still has a huge hindrance in the area of lithium ion battery,because it is unable to achieve an effective contact with surrounding conducting materials,resulting in failure to form lithium ion migration tunnels.In this work,we presented a facile method to synthesize the B-doped SiOx composite by adhering SiO_(x) particles with MWCNT(multi-walled carbon nanotube)under the assistance of lithium metaborate(LiBO_(2)).LiBO_(2),as a sintering aid,not only can react with SiO_(x) to form a compacted framework,but also build a three-dimensional(3D)conductive network for ions transportation.Furthermore,B-SiO_(x)@CNT@LBO anode delivers a remarkable lithium storage performance in terms of long cycles and high rate capability.A full cell coupled with NCM622 cathode achieves a high energy density of 429.5 Wh kg^(-1) based on the total mass of cathode.展开更多
The influence of the nanostructure of the conductive network composite(CNC)on the performance of ionic electroactive polymer(IEAP)actuators has been examined in detail.We have studied IEAP actuators consisting of CNCs...The influence of the nanostructure of the conductive network composite(CNC)on the performance of ionic electroactive polymer(IEAP)actuators has been examined in detail.We have studied IEAP actuators consisting of CNCs with different volume densities of gold nanoparticles(AuNPs)and the polymer network.Varying the concentration of AuNPs in CNC thin films was used as a means to control the CNC-ion interfacial area and the electrical resistance of the CNC,with minimum effect on the mechanical properties of the actuator.Increasing the interfacial area and reducing the resistance,while maintaining porosity of the composite,provide means for generating motion of more ions into the CNC at a significantly shorter time,which results in generation of strain at a faster rate.We have demonstrated that cationic strain in actuators with denser CNCs is improved by more than 460%.Denser CNC structures have larger interfacial areas,which results in attraction/repulsion of more ions in a shorter time,thus generation of a larger mechanical strain at a faster rate.Also,time-dependent response to a square-wave voltage was improved by increasing the AuNP concentration in the CNC.Under 0.1 Hz frequency,the cationic strain was increased by 64%when the AuNP concentration was increased from 4 to 20 ppm.展开更多
Aqueous zinc-ion batteries(AZIBs)show great potential for applications in grid-scale energy storage,given their intrinsic safety,cost effectiveness,environmental friendliness,and impressive electrochemical performance...Aqueous zinc-ion batteries(AZIBs)show great potential for applications in grid-scale energy storage,given their intrinsic safety,cost effectiveness,environmental friendliness,and impressive electrochemical performance.However,strong electrostatic interactions exist between zinc ions and host materials,and they hinder the development of advanced cathode materials for efficient,rapid,and stable Zn-ion storage.MXenes and their derivatives possess a large interlayer spacing,excellent hydrophilicity,outstanding electronic conductivity,and high redox activity.These materials are considered“rising star”cathode candidates for AZIBs.This comprehensive review discusses recent advances in MXenes as AZIB cathodes from the perspectives of crystal structure,Zn-storage mechanism,surface modification,interlayer engineering,and conductive network design to elucidate the correlations among their composition,structure,and electrochemical performance.This work also outlines the remaining challenges faced by MXenes for aqueous Zn-ion storage,such as the urgent need for improved toxic preparation methods,exploration of potential novel MXene cathodes,and suppression of layered MXene restacking upon cycling,and introduces the prospects of MXene-based cathode materials for high-performance AZIBs.展开更多
Transparent conductive films that are based on nanowire networks are essential to construct flexible,wearable,and even stretchable electronics.However,large-scale precise micropatterning,especially with regard to the ...Transparent conductive films that are based on nanowire networks are essential to construct flexible,wearable,and even stretchable electronics.However,large-scale precise micropatterning,especially with regard to the controllability of the organizing orientation of nanowires,is a critical challenge.Herein,we proposed a liquid film rupture self-assembly approach for manufacturing transparent conductive films with microstructure arrays based on a highly ordered nanowire network.The large-scale microstructure conductive films were fabricated through air-liquid interface self-assembly and liquid film rupture self-assembly.Six typical micropattern morphologies,including square,hexagon,circle,serpentine,etc.,were prepared to reveal the universal applicability of the proposed approach.The homogeneity and controllability of this approach were verified for multiple assemblies.With the assembly cycles increasing,the optical transmittance decreases slightly.In addition,theoretical model analysis is carried out,and the analytical formula of the speed of the film moving with the surface tension and the density of the liquid film is presented.Finally,the feasibility of this approach for piezoresistive strain sensors is verified.This fabrication approach demonstrated a cost-effective and efficient method for precisely arranging nanowires,which is useful in transparent and wearable applications.展开更多
Constructing controllable thermal conduction networks is the key to efficiently improve thermal conductivities of polymer composites.In this work,graphite oxide(GO)and functionalized carbon nanotubes(f-CNTs)are combin...Constructing controllable thermal conduction networks is the key to efficiently improve thermal conductivities of polymer composites.In this work,graphite oxide(GO)and functionalized carbon nanotubes(f-CNTs)are combined to prepare“Line-Plane”-like hetero-structured thermally conductive GO@f-CNTs fillers,which are then performed to construct controllable 3D GO@f-CNTs thermal conduction networks via selfsacrificing template method based on oxalic acid.Subsequently,thermally conductive GO@f-CNTs/polydimethylsiloxane(PDMS)composites are fabricated via casting method.When the size of oxalic acid is 0.24 mm and the volume fraction of GO@f-CNTs is 60 vol%,GO@f-CNTs/PDMS composites present the optimal thermal conductivity coefficient(λ,4.00 W·m^(-1)·K^(-1)),about 20 times that of theλof neat PDMS(0.20 W·m^(-1)·K^(-1)),also much higher than theλ(2.44 W·m^(-1)·K^(-1))of GO/f-CNTs/PDMS composites with the same amount of randomly dispersed fillers.Meanwhile,the obtained GO@f-CNTs/PDMS composites have excellent thermal stability,whoseλdeviation is only about 3%after 500 thermal cycles(20-200℃).展开更多
Heat dissipation involved safety issues are crucial for industrial applications of the high-energy density battery and fast charging technology.While traditional air or liquid cooling methods suffering from space limi...Heat dissipation involved safety issues are crucial for industrial applications of the high-energy density battery and fast charging technology.While traditional air or liquid cooling methods suffering from space limitation and possible leakage of electricity during charge process,emerging phase change materials as solid cooling media are of growing interest.Among them,paraffin wax(PW)with large latent heat capacity and low cost is desirable for heat dissipation and thermal management which mainly hindered by their relatively low thermal conductivity and susceptibility to leakage.Here,highly ordered and interconnected hexagonal boron nitride(h-BN)networks were established via ice template method and introduced into PW to enhance the thermal conductivity.The composite with 20 wt%loading amount of h-BN can guarantee a highly ordered network and exhibited high thermal conductivity(1.86 W m^(-1) K^(-1))which was 4 times larger compared with that of random dispersed h-BN involved PW and nearly 8 times larger compared with that of bare PW.The optimal thermal conductive composites demonstrated ultrafast heat dissipation as well as leakage resistance for lithium-ion batteries(LIBs),heat generated by LIBs can be effectively transferred under the working state and the surface temperature kept 6.9℃ lower at most under 2–5℃ continuous charge-discharge process compared with that of bare one which illustrated great potential for industrial thermal management.展开更多
The inferior conductivity and drastic volume expansion of silicon still remain the bottleneck in achieving high energy density Lithium-ion Batteries(LIBs).The design of the three-dimensional structure of electrodes by...The inferior conductivity and drastic volume expansion of silicon still remain the bottleneck in achieving high energy density Lithium-ion Batteries(LIBs).The design of the three-dimensional structure of electrodes by compositing silicon and carbon materials has been employed to tackle the above challenges,however,the exorbitant costs and the uncertainty of the conductive structure persist,leaving ample room for improvement.Herein,silicon nanoparticles were innovatively composited with eco-friendly biochar sourced from cotton to fabricate a 3D globally consecutive conductive network.The network serves a dual purpose:enhancing overall electrode conductivity and serving as a scaffold to maintain electrode integrity.The conductivity of the network was further augmented by introducing P-doping at the optimum doping temperature of 350℃.Unlike the local conductive sites formed by the mere mixing of silicon and conductive agents,the consecutive network can affirm the improvement of the conductivity at a macro level.Moreover,first-principle calculations further validated that the rapid diffusion of Li^(+)is attributed to the tailored electronic microstructure and charge rearrangement of the fiber.The prepared consecutive conductive Si@P-doped carbonized cotton fiber anode outperforms the inconsecutive Si@Graphite anode in both cycling performance(capacity retention of 1777.15 mAh g^(-1) vs.682.56 mAh g^(-1) after 150 cycles at 0.3 C)and rate performance(1244.24 mAh g^(-1) vs.370.28 mAh g^(-1) at 2.0 C).The findings of this study may open up new avenues for the development of globally interconnected conductive networks in Si-based anodes,thereby enabling the fabrication of high-performance LIBs.展开更多
Accurate estimation of liquid thermal conductivity is highly necessary to appropriately design equipments in different industries. Respect to this necessity, in the current investigation a feed-forward artificial neur...Accurate estimation of liquid thermal conductivity is highly necessary to appropriately design equipments in different industries. Respect to this necessity, in the current investigation a feed-forward artificial neural network(ANN) model is examined to correlate the liquid thermal conductivity of normal and aromatic hydrocarbons at the temperatures range of 257–338 K and atmospheric pressure. For this purpose, 956 experimental thermal conductivities for normal and aromatic hydrocarbons are collected from different previously published literature.During the modeling stage, to discriminate different substances, critical temperature(Tc), critical pressure(Pc)and acentric factor(ω) are utilized as the network inputs besides the temperature. During the examination, effects of different transfer functions and number of neurons in hidden layer are investigated to find the optimum network architecture. Besides, statistical error analysis considering the results obtained from available correlations and group contribution methods and proposed neural network is performed to reliably check the feasibility and accuracy of the proposed method. Respect to the obtained results, it can be concluded that the proposed neural network consisted of three layers namely, input, hidden and output layers with 22 neurons in hidden layer was the optimum ANN model. Generally, the proposed model enables to correlate the thermal conductivity of normal and aromatic hydrocarbons with absolute average relative deviation percent(AARD), mean square error(MSE), and correlation coefficient(R^2) of lower than 0.2%, 1.05 × 10^(-7) and 0.9994, respectively.展开更多
The changes of resistivity of conductive asphalt concrete at different temperatures were studied,and positive temperature coefficient（PTC）modelwas established to estimate the influence of temperature on the resistiv...The changes of resistivity of conductive asphalt concrete at different temperatures were studied,and positive temperature coefficient（PTC）modelwas established to estimate the influence of temperature on the resistivity quantitatively,which eliminated the interference with conductivity evaluation brought by temperature variation.Finally,the analysis of temperature cycling test results proves that the changes of percolation network structure caused by temperature variation prompt the emergence of PTC of conductive asphalt concrete.展开更多
Influenced by recent COVID-19,wearing face masks to block the spread of the epidemic has become the simplest and most effective way.However,after the people wear masks,thousands of tons of medical waste by used dis-po...Influenced by recent COVID-19,wearing face masks to block the spread of the epidemic has become the simplest and most effective way.However,after the people wear masks,thousands of tons of medical waste by used dis-posable masks will be generated every day in the world,causing great pressure on the environment.Herein,con-ductive polymer composites are fabricated by simple melt blending of mask fragments(mask polypropylene,short for mPP)and multi-walled carbon nanotubes(MWNTs).MWNTs were used as modifiers for composites because of their high strength and high conductivity.The crystalline structure,mechanical,electrical and thermal enhancement effect of the composites were investigated.MWNTs with high thermal stability acted the role of promoting the crystallisation of mPP by expediting the crystalline nucleation,leading to the improvement of amount for crystalline nucleus.MWNTs fibers interpenetrate with each other in mPP matrix to form conducting network.With 2.0 wt% MWNTs loading,the tensile strength and electrical conductivity of the composites were increased by 809% and 7 orders of magnitude.MWNTs fibers interpenetrate with each other in mPP matrix to form conducting network.Thus,more conducting paths were constructed to transport carriers.The findings may open a way for high value utilization of the disposable masks.展开更多
Studies on heat conduction are so far mainly focused on regular systems such as the one-dimensional（1D） and twodimensional（2D） lattices where atoms are regularly connected and temperatures of atoms are homogeneous...Studies on heat conduction are so far mainly focused on regular systems such as the one-dimensional（1D） and twodimensional（2D） lattices where atoms are regularly connected and temperatures of atoms are homogeneously distributed.However, realistic systems such as the nanotube/nanowire networks are not regular but heterogeneously structured, and their heat conduction remains largely unknown. We present a model of quasi-physical networks to study heat conduction in such physical networks and focus on how the network structure influences the heat conduction coefficient κ. In this model,we for the first time consider each link as a 1D chain of atoms instead of a spring in the previous studies. We find that κ is different from link to link in the network, in contrast to the same constant in a regular 1D or 2D lattice. Moreover, for each specific link, we present a formula to show how κ depends on both its link length and the temperatures on its two ends.These findings show that the heat conduction in physical networks is not a straightforward extension of 1D and 2D lattices but seriously influenced by the network structure.展开更多
The rapid development of aerospace weapons and equipment,wireless base stations and 5G communication technologies has put forward newer and higher requirements for the comprehensive performances of polymer-based elect...The rapid development of aerospace weapons and equipment,wireless base stations and 5G communication technologies has put forward newer and higher requirements for the comprehensive performances of polymer-based electromagnetic interference(EMI)shielding composites.However,most of currently prepared polymer-based EMI shielding composites are still difficult to combine high performance and multi-functionality.In response to this,based on the research works of relevant researchers as well as our research group,three possible directions to break through the above bottlenecks are proposed,including construction of efficient conductive networks,optimization of multi-interfaces for lightweight and multifunction compatibility design.The future development trends in three directions are prospected,and it is hoped to provide certain theoretical basis and technical guidance for the preparation,research and development of polymer-based EMI shielding composites.展开更多
High-efficiency electromagnetic interference(EMI)shielding materials are of great importance for electronic equipment reliability,information security and human health.In this work,bidirectional aligned Ti_(3)C_(2)T_(...High-efficiency electromagnetic interference(EMI)shielding materials are of great importance for electronic equipment reliability,information security and human health.In this work,bidirectional aligned Ti_(3)C_(2)T_(x)@Fe_(3)O_(4)/CNF aerogels(BTFCA)were firstly assembled by bidirectional freezing and freeze-drying technique,and the BTFCA/epoxy nanocomposites with long-range aligned lamellar structures were then prepared by vacuum-assisted impregnation of epoxy resins.Benefitting from the successful construction of bidirectional aligned three-dimensional conductive networks and electromagnetic synergistic effect,when the mass fraction of Ti_(3)C_(2)T_(x) and Fe_(3)O_(4) are 2.96 and 1.48 wt%,BTFCA/epoxy nanocomposites show outstanding EMI shield-ing effectiveness of 79 dB,about 10 times of that of blended Ti_(3)C_(2)T_(x)@Fe_(3)O_(4)/epoxy(8 dB)nanocomposites with the same loadings of Ti_(3)C_(2)T_(x) and Fe_(3)O_(4).Meantime,the corresponding BTFCA/epoxy nanocomposites also present excellent thermal stability(T_(heat-resistance index) of 198.7℃)and mechanical properties(storage modulus of 9902.1 MPa,Young’s modulus of 4.51 GPa and hardness of 0.34 GPa).Our fabricated BTFCA/epoxy nanocomposites would greatly expand the applications of MXene and epoxy resins in the fields of information security,aerospace and weapon manufacturing,etc.展开更多
基金the National Natural Science Foundation of China(Nos.22209095 and 22238004).
文摘Progress in the fast charging of high-capacity silicon monoxide(SiO)-based anode is currently hindered by insufficient conductivity and notable volume expansion.The construction of an interface conductive network effectively addresses the aforementioned problems;however,the impact of its quality on lithium-ion transfer and structure durability is yet to be explored.Herein,the influence of an interface conductive network on ionic transport and mechanical stability under fast charging is explored for the first time.2D modeling simulation and Cryo-transmission electron microscopy precisely reveal the mitigation of interface polarization owing to a higher fraction of conductive inorganic species formation in bilayer solid electrolyte interphase is mainly responsible for a linear decrease in ionic diffusion energy barrier.Furthermore,atomic force microscopy and Raman shift exhibit substantial stress dissipation generated by a complete conductive network,which is critical to the linear reduction of electrode residual stress.This study provides insights into the rational design of optimized interface SiO-based anodes with reinforced fast-charging performance.
基金supported by the National Natural Science Foundation of China(Nos.51973142,52033005,52003169).
文摘Highly conductive polymer composites(CPCs) with excellent mechanical flexibility are ideal materials for designing excellent electromagnetic interference(EMI) shielding materials,which can be used for the electromagnetic interference protection of flexible electronic devices.It is extremely urgent to fabricate ultra-strong EMI shielding CPCs with efficient conductive networks.In this paper,a novel silver-plated polylactide short fiber(Ag@PL ASF,AAF) was fabricated and was integrated with carbon nanotubes(CNT) to construct a multi-scale conductive network in polydimethylsiloxane(PDMS) matrix.The multi-scale conductive network endowed the flexible PDMS/AAF/CNT composite with excellent electrical conductivity of 440 S m-1and ultra-strong EMI shielding effectiveness(EMI SE) of up to 113 dB,containing only 5.0 vol% of AAF and 3.0 vol% of CNT(11.1wt% conductive filler content).Due to its excellent flexibility,the composite still showed 94% and 90% retention rates of EMI SE even after subjected to a simulated aging strategy(60℃ for 7 days) and 10,000 bending-releasing cycles.This strategy provides an important guidance for designing excellent EMI shielding materials to protect the workspace,environment and sensitive circuits against radiation for flexible electronic devices.
基金financially supported by the National Key Research Program of China(No.2018YFC0808601)。
文摘Black phosphorus has been recognized as a prospective candidate anode material for sodium-ion batteries(SIBs)due to its ultrahigh theoretical capacity of 2596 mA·h/g and high electric conductivity of≈300 S/m.However,its large volume expansion and contraction during sodiation/desodiation lead to poor cycling stability.In this work,a BP/graphite nanoparticle/nitrogen-doped multiwalled carbon nanotubes(BP/G/CNTs)composite with a dual-carbon conductive network is successfully fabricated as a promising anode material for SIBs through a simple two-step mechanical milling process.The unique structure can mitigate the eff ect of volume changes and provide additional electron conduction pathways during cycles.Furthermore,the formation of P–O–C bonds helps maintain the intimate connection between phosphorus and carbon,thereby improving the cycling and rate performance.As a result,the BP/G/CNTs composite delivers a high initial Coulombic efficiency(89.6%)and a high specific capacity for SIBs(1791.3 mA·h/g after 100 cycles at 519.2 mA/g and 1665.2 mA·h/g after 100 cycles at 1298 mA/g).Based on these results,the integrated strategy of one-and two-dimensional carbon materials can guide other anode materials for SIBs.
基金supported by the National Natural Science Foundation of China(Nos.22209140 and 52202286)Natural Science Foundation of Shandong Province(No.ZR2022QE059)+3 种基金Shandong Laboratory of Advanced Materials and Green Manufacturing at Yantai(Yantai)(No.AMGM2023A08)Natural Science Foundation of Zhejiang Province(Nos.LGG23B030011 and LY24B030006)Scientific Research Fund of Zhejiang Provincial Education Department(No.Y202148249)Basic Research Project of Wenzhou City(No.G20220016).
文摘Vanadium dioxide(VO_(2)) with the advantages of high theoretical capacity and tunnel structure has attracted considerable promising candidates for aqueous zinc-ion batteries.Nevertheless,the intrinsic low electronic conductivity of VO_(2) results in an unsatisfactory electrochemical performance.Herein,a flower-like VO_(2)/carbon nanotubes(CNTs)composite was obtained by a facile hydrothermal method.The unique flower-like morphology shortens the ion transport length and facilitates electrolyte infiltration.Meanwhile,the CNT conductive networks is in favor of fast electron transfer.A highly reversible zinc storage mechanism was revealed by ex-situ X-ray diffraction and X-ray photoelectron spectroscopy.As a result,the VO_(2)/CNTs cathode exhibits a high reversible capacity(410 mAh·g^(−1)),superior rate performance(305 mAh·g^(−1)at 5 A·g^(−1)),and excellent cycling stability(a reversible capacity of 221 mAh·g^(−1)was maintained even after 2000 cycles).This work provides a guide for the design of high-performance cathode materials for aqueous zinc metal batteries.
基金support by National Natural Science Foundation of China(No.U2004212).
文摘KTi_(2)(PO_(4))_(3)is a promising anode material for potassium storage,but suffers from low conductivity and difficult balance between high capacity and good structural stability.Herein,the Ti_(3)C_(2)T_(x)MXene is used as a multifunctional binder to fabricate the KTi_(2)(PO_(4))_(3)electrode by the traditional homogenizing-coating method.The MXene nanosheets,together with the conductive agent super P nanoparticles,construct a multiple conductive network for fast electron/ion transfer and high electrochemical kinet-ics.Moreover,the network ensures the structural stability of the KTi_(2)(PO_(4))_(3)electrode during the de-intercalation/intercalation of 4 K^(+)ions,which is beneficial for simultaneously achieving high capacity and good cycle performance.Therefore,the MXene-bonded KTi_(2)(PO_(4))_(3)electrode delivers a reversible capacity of 255.2 mAh/g at 50 mA/g,outstanding rate capability with 132.3 mAh/g at 2 A/g,and ex-cellent cycle performance with 151.6 mAh/g at 1 A/g after 2000 cycles.This work not only suggests a high-performance anode material for potassium-ion batteries,but also demonstrates that the MXene is a promising binder material for constructing conductive electrodes in rechargeable batteries.
基金Foundation of National Natural Science Foundation of China,Grant/Award Number:51903145Natural Science Basic Research Plan for Distinguished Young Scholars in Shaanxi Province of China,Grant/Award Number:2019JC-11Wang L.would like to thank the Innovation Foundation for Doctor Dissertation of Northwestern Polytechnical University,Grant/Award Number:CX202053。
文摘High-frequency electromagnetic waves and electronic products can bring great convenience to people’s life,but lead to a series of electromagnetic interference(EMI)problems,such as great potential dangers to the normal operation of elec-tronic components and human safety.Therefore,the research of EMI shield-ing materials has attracted extensive attention by the scholars.Among them,polymer-based EMI shielding materials with light weight,high specific strength,and stable properties have become the current mainstream.The construction of 3D conductive networks has proved to be an effective method for the prepara-tion of polymer-based EMI shielding materials with excellent shielding effective-ness(SE).In this paper,the shielding mechanism of polymer-based EMI shield-ing materials with 3D conductive networks is briefly introduced,with emphasis on the preparation methods and latest research progress of polymer-based EMI shielding materials with different 3D conductive networks.The key scientific and technical problems to be solved in the field of polymer-based EMI shielding materials are also put forward.Finally,the development trend and application prospects of polymer-based EMI shielding materials are prospected.
基金supported by the National Natural Science Foundation of China(Nos.51973012,21704003,and 51903122)National 973 Basic Research Program of China(No.2015CB654704)+1 种基金the Foundation for Innovative Research Groups of the NSF of China(No.51521062)The authors acknowledge the National Supercomputer Center in Guangzhou,Lvliang,and Shenzhen.
文摘Contolling the formation of the conductive network in the polymer nanocomposites(PNCs)is very meaningful to enhance their electrical property.In this work,we investigated the effect of grafted nanoparticles(NPs)on the conductive probability of PNCs in the quiescent state as well as under the shear field via a coarse grained molecular dynamics simulation.It is found that the smallest percolation threshold is realized at the moderate grafting density,the moderate length of grafted chains or the moderate interaction between grafted chains and free chains.Corresponding to it,the dispersion state of NPs varies from the contact aggregation to the uniform dispersion.By analyzing the connection mode among NPs,the probabilty of NPs which connect three other ones reaches the maximum value at their moderate dispersion state which is responsible for the optimal conductive probability.In addition,the main cluster size is characterized to better understand the conductive network which is consistent with the percolation threshold.It is interesting to find that the percolation threshold is smaller under the shear field than under the quiescent state.The shear field induces more NPs which connect three other ones.This benefits the formation of the new conductive network.Meanwhile,the anisotropy of the conductive probability is reduced with increasing the grafting density.In summary,this work provides a clear picture on how the conductive network of grafted NPs evolves under the shear field.
基金sponsored by the National Natural Science Foundation of China(21875107,U1802256,51672128,52072173 and 21773118)Jiangsu Specially-Appointed Professors Program,Jiangsu Province Outstanding Youth Fund(SBK2020010215)+4 种基金Leading Edge Technology of Jiangsu Province(BK20202008)Key Research and Development Program in Jiangsu Province(BE2018122)Natural Science Foundation of Jiangsu Province(BK20170778)Fundamental Research Funds for the Central Universities(NE2016005)and the Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD)W.H.acknowledges support from Postgraduate Research&Practice Innovation Program of Jiangsu Province(KYCX20_0192).
文摘Currently,the practical application of SiO_(x) still has a huge hindrance in the area of lithium ion battery,because it is unable to achieve an effective contact with surrounding conducting materials,resulting in failure to form lithium ion migration tunnels.In this work,we presented a facile method to synthesize the B-doped SiOx composite by adhering SiO_(x) particles with MWCNT(multi-walled carbon nanotube)under the assistance of lithium metaborate(LiBO_(2)).LiBO_(2),as a sintering aid,not only can react with SiO_(x) to form a compacted framework,but also build a three-dimensional(3D)conductive network for ions transportation.Furthermore,B-SiO_(x)@CNT@LBO anode delivers a remarkable lithium storage performance in terms of long cycles and high rate capability.A full cell coupled with NCM622 cathode achieves a high energy density of 429.5 Wh kg^(-1) based on the total mass of cathode.
基金supported in part by the US Army Research Office under Grant No.W911NF-07-1-0452 Ionic Liquids in Electro-Active Devices(ILEAD)MURI.
文摘The influence of the nanostructure of the conductive network composite(CNC)on the performance of ionic electroactive polymer(IEAP)actuators has been examined in detail.We have studied IEAP actuators consisting of CNCs with different volume densities of gold nanoparticles(AuNPs)and the polymer network.Varying the concentration of AuNPs in CNC thin films was used as a means to control the CNC-ion interfacial area and the electrical resistance of the CNC,with minimum effect on the mechanical properties of the actuator.Increasing the interfacial area and reducing the resistance,while maintaining porosity of the composite,provide means for generating motion of more ions into the CNC at a significantly shorter time,which results in generation of strain at a faster rate.We have demonstrated that cationic strain in actuators with denser CNCs is improved by more than 460%.Denser CNC structures have larger interfacial areas,which results in attraction/repulsion of more ions in a shorter time,thus generation of a larger mechanical strain at a faster rate.Also,time-dependent response to a square-wave voltage was improved by increasing the AuNP concentration in the CNC.Under 0.1 Hz frequency,the cationic strain was increased by 64%when the AuNP concentration was increased from 4 to 20 ppm.
基金the National Natural Science Foundation of China(Nos.52372171,22075016,and 52201201)the National Program for Support of Top-notch Young Professionals,China+3 种基金the Interdisciplinary Research Project for Young Teachers of University of Science and Technology Beijing,China(No.FRF-IDRY-21-011)the State Key Laboratory for Advanced Metals and Materials,China(No.2022Z-17)the Ministry of Education Social Science Project,China(No.18YJC790087)the“Xiaomi Young Scholar”Funding Project,China,and the 111 Project,China(No.B170003)。
文摘Aqueous zinc-ion batteries(AZIBs)show great potential for applications in grid-scale energy storage,given their intrinsic safety,cost effectiveness,environmental friendliness,and impressive electrochemical performance.However,strong electrostatic interactions exist between zinc ions and host materials,and they hinder the development of advanced cathode materials for efficient,rapid,and stable Zn-ion storage.MXenes and their derivatives possess a large interlayer spacing,excellent hydrophilicity,outstanding electronic conductivity,and high redox activity.These materials are considered“rising star”cathode candidates for AZIBs.This comprehensive review discusses recent advances in MXenes as AZIB cathodes from the perspectives of crystal structure,Zn-storage mechanism,surface modification,interlayer engineering,and conductive network design to elucidate the correlations among their composition,structure,and electrochemical performance.This work also outlines the remaining challenges faced by MXenes for aqueous Zn-ion storage,such as the urgent need for improved toxic preparation methods,exploration of potential novel MXene cathodes,and suppression of layered MXene restacking upon cycling,and introduces the prospects of MXene-based cathode materials for high-performance AZIBs.
基金supported by the National Natural Science Foundation of China(Nos.62074029,61905035,61971108,62004029,51905554)the National Key Research and Development Program of China(No.2022YFB3206100)+3 种基金the Key R&D Program of Sichuan Province(Nos.2022JDTD0020,2020ZHCG0038)the Sichuan Science and Technology Program(Nos.2020JDJQ0036,2019YJ0198,2020YJ0015)the Natural Science Foundation of Sichuan(No.2022NSFSC1941)the Fundamental Research Funds for the Central Universities(No.ZYGX2019Z002).
文摘Transparent conductive films that are based on nanowire networks are essential to construct flexible,wearable,and even stretchable electronics.However,large-scale precise micropatterning,especially with regard to the controllability of the organizing orientation of nanowires,is a critical challenge.Herein,we proposed a liquid film rupture self-assembly approach for manufacturing transparent conductive films with microstructure arrays based on a highly ordered nanowire network.The large-scale microstructure conductive films were fabricated through air-liquid interface self-assembly and liquid film rupture self-assembly.Six typical micropattern morphologies,including square,hexagon,circle,serpentine,etc.,were prepared to reveal the universal applicability of the proposed approach.The homogeneity and controllability of this approach were verified for multiple assemblies.With the assembly cycles increasing,the optical transmittance decreases slightly.In addition,theoretical model analysis is carried out,and the analytical formula of the speed of the film moving with the surface tension and the density of the liquid film is presented.Finally,the feasibility of this approach for piezoresistive strain sensors is verified.This fabrication approach demonstrated a cost-effective and efficient method for precisely arranging nanowires,which is useful in transparent and wearable applications.
基金financially supported by the National Natural Science Foundation of China(No.51973173)Technological Base Scientific Research Projects(Highly Thermally Conductive Nonmetal Materials)+3 种基金Natural Science Foundation of Chongqing,China(No.2023NSCQ-MSX2547)Shaanxi Province Key Research and Development Plan Project(No.2023-YBGY-461)Fundamental Research Funds for the Central Universities,the Innovation Capability Support Program of Shaanxi(No.2024RS-CXTD-57)financially supported by Polymer Electromagnetic Functional Materials Innovation Team of Shaanxi Sanqin Scholars。
文摘Constructing controllable thermal conduction networks is the key to efficiently improve thermal conductivities of polymer composites.In this work,graphite oxide(GO)and functionalized carbon nanotubes(f-CNTs)are combined to prepare“Line-Plane”-like hetero-structured thermally conductive GO@f-CNTs fillers,which are then performed to construct controllable 3D GO@f-CNTs thermal conduction networks via selfsacrificing template method based on oxalic acid.Subsequently,thermally conductive GO@f-CNTs/polydimethylsiloxane(PDMS)composites are fabricated via casting method.When the size of oxalic acid is 0.24 mm and the volume fraction of GO@f-CNTs is 60 vol%,GO@f-CNTs/PDMS composites present the optimal thermal conductivity coefficient(λ,4.00 W·m^(-1)·K^(-1)),about 20 times that of theλof neat PDMS(0.20 W·m^(-1)·K^(-1)),also much higher than theλ(2.44 W·m^(-1)·K^(-1))of GO/f-CNTs/PDMS composites with the same amount of randomly dispersed fillers.Meanwhile,the obtained GO@f-CNTs/PDMS composites have excellent thermal stability,whoseλdeviation is only about 3%after 500 thermal cycles(20-200℃).
基金supported by the National Key R&D Program of China(2018YFA0209600)the National Natural Science Foundation of China(22022813,21878268)the Leading Innovative and Enterpreneur Team Introduction Program of Zhejiang(2019R01006)。
文摘Heat dissipation involved safety issues are crucial for industrial applications of the high-energy density battery and fast charging technology.While traditional air or liquid cooling methods suffering from space limitation and possible leakage of electricity during charge process,emerging phase change materials as solid cooling media are of growing interest.Among them,paraffin wax(PW)with large latent heat capacity and low cost is desirable for heat dissipation and thermal management which mainly hindered by their relatively low thermal conductivity and susceptibility to leakage.Here,highly ordered and interconnected hexagonal boron nitride(h-BN)networks were established via ice template method and introduced into PW to enhance the thermal conductivity.The composite with 20 wt%loading amount of h-BN can guarantee a highly ordered network and exhibited high thermal conductivity(1.86 W m^(-1) K^(-1))which was 4 times larger compared with that of random dispersed h-BN involved PW and nearly 8 times larger compared with that of bare PW.The optimal thermal conductive composites demonstrated ultrafast heat dissipation as well as leakage resistance for lithium-ion batteries(LIBs),heat generated by LIBs can be effectively transferred under the working state and the surface temperature kept 6.9℃ lower at most under 2–5℃ continuous charge-discharge process compared with that of bare one which illustrated great potential for industrial thermal management.
基金supported by the National Natural Science Foundation of China(No.12205252)the Basic Public Welfare Re-search Special Project of Zhejiang Province(No.LZY22B040001)+4 种基金the Quzhou Science and Technology Plan Project(No.2022K39)Science and Technology Project of Quzhou Research Institute,Zhejiang University(Nos.IZQ2021KJ2032,IZQ2022KJ3014,and IZQ2022KJ3002)Independent scientific Research Project of Quzhou Research Institute,Zhejiang University(No.IZQ2021RCZX007)New“115 talents”Project ofQuzhou,National Nature Science Foundation of China(No.52172244)Fundamental Research Funds for the Central University(No.226202200053).
文摘The inferior conductivity and drastic volume expansion of silicon still remain the bottleneck in achieving high energy density Lithium-ion Batteries(LIBs).The design of the three-dimensional structure of electrodes by compositing silicon and carbon materials has been employed to tackle the above challenges,however,the exorbitant costs and the uncertainty of the conductive structure persist,leaving ample room for improvement.Herein,silicon nanoparticles were innovatively composited with eco-friendly biochar sourced from cotton to fabricate a 3D globally consecutive conductive network.The network serves a dual purpose:enhancing overall electrode conductivity and serving as a scaffold to maintain electrode integrity.The conductivity of the network was further augmented by introducing P-doping at the optimum doping temperature of 350℃.Unlike the local conductive sites formed by the mere mixing of silicon and conductive agents,the consecutive network can affirm the improvement of the conductivity at a macro level.Moreover,first-principle calculations further validated that the rapid diffusion of Li^(+)is attributed to the tailored electronic microstructure and charge rearrangement of the fiber.The prepared consecutive conductive Si@P-doped carbonized cotton fiber anode outperforms the inconsecutive Si@Graphite anode in both cycling performance(capacity retention of 1777.15 mAh g^(-1) vs.682.56 mAh g^(-1) after 150 cycles at 0.3 C)and rate performance(1244.24 mAh g^(-1) vs.370.28 mAh g^(-1) at 2.0 C).The findings of this study may open up new avenues for the development of globally interconnected conductive networks in Si-based anodes,thereby enabling the fabrication of high-performance LIBs.
文摘Accurate estimation of liquid thermal conductivity is highly necessary to appropriately design equipments in different industries. Respect to this necessity, in the current investigation a feed-forward artificial neural network(ANN) model is examined to correlate the liquid thermal conductivity of normal and aromatic hydrocarbons at the temperatures range of 257–338 K and atmospheric pressure. For this purpose, 956 experimental thermal conductivities for normal and aromatic hydrocarbons are collected from different previously published literature.During the modeling stage, to discriminate different substances, critical temperature(Tc), critical pressure(Pc)and acentric factor(ω) are utilized as the network inputs besides the temperature. During the examination, effects of different transfer functions and number of neurons in hidden layer are investigated to find the optimum network architecture. Besides, statistical error analysis considering the results obtained from available correlations and group contribution methods and proposed neural network is performed to reliably check the feasibility and accuracy of the proposed method. Respect to the obtained results, it can be concluded that the proposed neural network consisted of three layers namely, input, hidden and output layers with 22 neurons in hidden layer was the optimum ANN model. Generally, the proposed model enables to correlate the thermal conductivity of normal and aromatic hydrocarbons with absolute average relative deviation percent(AARD), mean square error(MSE), and correlation coefficient(R^2) of lower than 0.2%, 1.05 × 10^(-7) and 0.9994, respectively.
基金Funded by the National Natural Science Foundation of China(No.51178348)
文摘The changes of resistivity of conductive asphalt concrete at different temperatures were studied,and positive temperature coefficient（PTC）modelwas established to estimate the influence of temperature on the resistivity quantitatively,which eliminated the interference with conductivity evaluation brought by temperature variation.Finally,the analysis of temperature cycling test results proves that the changes of percolation network structure caused by temperature variation prompt the emergence of PTC of conductive asphalt concrete.
基金M.Xiang and S.Dong wishes to thank the National Natural Science Foundation of China(21908086 and 51801083)Changzhou Sci&Tech Program(CJ20190035)+1 种基金Jiangsu Higher Education Institutions in China(19KJB610011)Natural Science Foundation of Jiangsu Province(BK20181044).
文摘Influenced by recent COVID-19,wearing face masks to block the spread of the epidemic has become the simplest and most effective way.However,after the people wear masks,thousands of tons of medical waste by used dis-posable masks will be generated every day in the world,causing great pressure on the environment.Herein,con-ductive polymer composites are fabricated by simple melt blending of mask fragments(mask polypropylene,short for mPP)and multi-walled carbon nanotubes(MWNTs).MWNTs were used as modifiers for composites because of their high strength and high conductivity.The crystalline structure,mechanical,electrical and thermal enhancement effect of the composites were investigated.MWNTs with high thermal stability acted the role of promoting the crystallisation of mPP by expediting the crystalline nucleation,leading to the improvement of amount for crystalline nucleus.MWNTs fibers interpenetrate with each other in mPP matrix to form conducting network.With 2.0 wt% MWNTs loading,the tensile strength and electrical conductivity of the composites were increased by 809% and 7 orders of magnitude.MWNTs fibers interpenetrate with each other in mPP matrix to form conducting network.Thus,more conducting paths were constructed to transport carriers.The findings may open a way for high value utilization of the disposable masks.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11135001 and 11375066)the National Basic Research Program of China(Grant No.2013CB834100)
文摘Studies on heat conduction are so far mainly focused on regular systems such as the one-dimensional（1D） and twodimensional（2D） lattices where atoms are regularly connected and temperatures of atoms are homogeneously distributed.However, realistic systems such as the nanotube/nanowire networks are not regular but heterogeneously structured, and their heat conduction remains largely unknown. We present a model of quasi-physical networks to study heat conduction in such physical networks and focus on how the network structure influences the heat conduction coefficient κ. In this model,we for the first time consider each link as a 1D chain of atoms instead of a spring in the previous studies. We find that κ is different from link to link in the network, in contrast to the same constant in a regular 1D or 2D lattice. Moreover, for each specific link, we present a formula to show how κ depends on both its link length and the temperatures on its two ends.These findings show that the heat conduction in physical networks is not a straightforward extension of 1D and 2D lattices but seriously influenced by the network structure.
基金The authors are grateful for the supports from the National Natural Science Foundation of China(U21A2093)Y.L.Zhang would like to thank the Innovation Foundation for Doctor Dissertation of Northwestern Polytechnical University(CX2021107)+1 种基金This work is also financially supported by Polymer Electromagnetic Functional Materials Innovation Team of Shaanxi Sanqin ScholarsOpen access funding provided by Shanghai Jiao Tong University
文摘The rapid development of aerospace weapons and equipment,wireless base stations and 5G communication technologies has put forward newer and higher requirements for the comprehensive performances of polymer-based electromagnetic interference(EMI)shielding composites.However,most of currently prepared polymer-based EMI shielding composites are still difficult to combine high performance and multi-functionality.In response to this,based on the research works of relevant researchers as well as our research group,three possible directions to break through the above bottlenecks are proposed,including construction of efficient conductive networks,optimization of multi-interfaces for lightweight and multifunction compatibility design.The future development trends in three directions are prospected,and it is hoped to provide certain theoretical basis and technical guidance for the preparation,research and development of polymer-based EMI shielding composites.
基金The authors are grateful for the supports from the National Natural Science Foundation of China(U21A2093 and 52203100)Y.L.Zhang would like to thank the Innovation Foundation for Doctor Dissertation of Northwestern Polytechnical University(CX2021107)。
文摘High-efficiency electromagnetic interference(EMI)shielding materials are of great importance for electronic equipment reliability,information security and human health.In this work,bidirectional aligned Ti_(3)C_(2)T_(x)@Fe_(3)O_(4)/CNF aerogels(BTFCA)were firstly assembled by bidirectional freezing and freeze-drying technique,and the BTFCA/epoxy nanocomposites with long-range aligned lamellar structures were then prepared by vacuum-assisted impregnation of epoxy resins.Benefitting from the successful construction of bidirectional aligned three-dimensional conductive networks and electromagnetic synergistic effect,when the mass fraction of Ti_(3)C_(2)T_(x) and Fe_(3)O_(4) are 2.96 and 1.48 wt%,BTFCA/epoxy nanocomposites show outstanding EMI shield-ing effectiveness of 79 dB,about 10 times of that of blended Ti_(3)C_(2)T_(x)@Fe_(3)O_(4)/epoxy(8 dB)nanocomposites with the same loadings of Ti_(3)C_(2)T_(x) and Fe_(3)O_(4).Meantime,the corresponding BTFCA/epoxy nanocomposites also present excellent thermal stability(T_(heat-resistance index) of 198.7℃)and mechanical properties(storage modulus of 9902.1 MPa,Young’s modulus of 4.51 GPa and hardness of 0.34 GPa).Our fabricated BTFCA/epoxy nanocomposites would greatly expand the applications of MXene and epoxy resins in the fields of information security,aerospace and weapon manufacturing,etc.
