In order to obtain more accurate precipitation data and better simulate the precipitation on the Tibetan Plateau,the simulation capability of 14 Coupled Model Intercomparison Project Phase 6(CMIP6)models of historical...In order to obtain more accurate precipitation data and better simulate the precipitation on the Tibetan Plateau,the simulation capability of 14 Coupled Model Intercomparison Project Phase 6(CMIP6)models of historical precipitation(1982-2014)on the Qinghai-Tibetan Plateau was evaluated in this study.Results indicate that all models exhibit an overestimation of precipitation through the analysis of the Taylor index,temporal and spatial statistical parameters.To correct the overestimation,a fusion correction method combining the Backpropagation Neural Network Correction(BP)and Quantum Mapping(QM)correction,named BQ method,was proposed.With this method,the historical precipitation of each model was corrected in space and time,respectively.The correction results were then analyzed in time,space,and analysis of variance(ANOVA)with those corrected by the BP and QM methods,respectively.Finally,the fusion correction method results for each model were compared with the Climatic Research Unit(CRU)data for significance analysis to obtain the trends of precipitation increase and decrease for each model.The results show that the IPSL-CM6A-LR model is relatively good in simulating historical precipitation on the Qinghai-Tibetan Plateau(R=0.7,RSME=0.15)among the uncorrected data.In terms of time,the total precipitation corrected by the fusion method has the same interannual trend and the closest precipitation values to the CRU data;In terms of space,the annual average precipitation corrected by the fusion method has the smallest difference with the CRU data,and the total historical annual average precipitation is not significantly different from the CRU data,which is better than BP and QM.Therefore,the correction effect of the fusion method on the historical precipitation of each model is better than that of the QM and BP methods.The precipitation in the central and northeastern parts of the plateau shows a significant increasing trend.The correlation coefficients between monthly precipitation and site-detected precipitation for all models after BQ correction exceed 0.8.展开更多
Objective: This study aims to evaluate the efficacy and safety of using a strip-shaped cymba conchae orthosis for the nonsurgical correction of complex auricular deformities. Methods: Clinical data were collected from...Objective: This study aims to evaluate the efficacy and safety of using a strip-shaped cymba conchae orthosis for the nonsurgical correction of complex auricular deformities. Methods: Clinical data were collected from 2020 to 2021 for 6 patients who underwent correction using a stripshaped cymba conchae orthosis. The indications, corrective effects, and complications associated with use of the orthosis were analyzed. Results: There were four indications for treatment: cryptotia with helix adhesion;cryptotia with grade I microtia;cryptotia with excessive helix thickness;and auricular deformity beyond the treatment time window(≥6 months). Excellent corrective effects were observed in all 6 patients. Complications occurred in one patient, who recovered after symptomatic treatment. Conclusion: The use of a strip-shaped cymba conchae orthosis alone or combined with a U-shaped helix orthosis presents a feasible approach for correcting complex auricular deformities or deformities beyond the treatment time window in pediatric patients.展开更多
This study explores the application of single photon detection(SPD)technology in underwater wireless optical communication(UWOC)and analyzes the influence of different modulation modes and error correction coding type...This study explores the application of single photon detection(SPD)technology in underwater wireless optical communication(UWOC)and analyzes the influence of different modulation modes and error correction coding types on communication performance.The study investigates the impact of on-off keying(OOK)and 2-pulse-position modulation(2-PPM)on the bit error rate(BER)in single-channel intensity and polarization multiplexing.Furthermore,it compares the error correction performance of low-density parity check(LDPC)and Reed-Solomon(RS)codes across different error correction coding types.The effects of unscattered photon ratio and depolarization ratio on BER are also verified.Finally,a UWOC system based on SPD is constructed,achieving 14.58 Mbps with polarization OOK multiplexing modulation and 4.37 Mbps with polarization 2-PPM multiplexing modulation using LDPC code error correction.展开更多
The longitudinal dispersion of the projectile in shooting tests of two-dimensional trajectory corrections fused with fixed canards is extremely large that it sometimes exceeds the correction ability of the correction ...The longitudinal dispersion of the projectile in shooting tests of two-dimensional trajectory corrections fused with fixed canards is extremely large that it sometimes exceeds the correction ability of the correction fuse actuator.The impact point easily deviates from the target,and thus the correction result cannot be readily evaluated.However,the cost of shooting tests is considerably high to conduct many tests for data collection.To address this issue,this study proposes an aiming method for shooting tests based on small sample size.The proposed method uses the Bootstrap method to expand the test data;repeatedly iterates and corrects the position of the simulated theoretical impact points through an improved compatibility test method;and dynamically adjusts the weight of the prior distribution of simulation results based on Kullback-Leibler divergence,which to some extent avoids the real data being"submerged"by the simulation data and achieves the fusion Bayesian estimation of the dispersion center.The experimental results show that when the simulation accuracy is sufficiently high,the proposed method yields a smaller mean-square deviation in estimating the dispersion center and higher shooting accuracy than those of the three comparison methods,which is more conducive to reflecting the effect of the control algorithm and facilitating test personnel to iterate their proposed structures and algorithms.;in addition,this study provides a knowledge base for further comprehensive studies in the future.展开更多
In the original publication the third author name is published incorrectly as“Hayatdavoodi Masoud”.The correct author name should be read as“Masoud Hayatdavoodi”.The correct author name is available in this correc...In the original publication the third author name is published incorrectly as“Hayatdavoodi Masoud”.The correct author name should be read as“Masoud Hayatdavoodi”.The correct author name is available in this correction.展开更多
We calculate the thermodynamic quantities in the quantum corrected Reissner-Nordstr?m-AdS(RN-AdS)black hole,and examine their quantum corrections.By analyzing the mass and heat capacity,we give the critical state and ...We calculate the thermodynamic quantities in the quantum corrected Reissner-Nordstr?m-AdS(RN-AdS)black hole,and examine their quantum corrections.By analyzing the mass and heat capacity,we give the critical state and the remnant state,respectively,and discuss their consistency.Then,we investigate the quantum tunneling from the event horizon of massless scalar particle by using the null geodesic method,and charged massive boson W^(±)and fermions by using the Hamilton-Jacob method.It is shown that the same Hawking temperature can be obtained from these tunneling processes of different particles and methods.Next,by using the generalized uncertainty principle(GUP),we study the quantum corrections to the tunneling and the temperature.Then the logarithmic correction to the black hole entropy is obtained.展开更多
The detection of hypersonic targets usually confronts range migration(RM)issue before coherent integration(CI).The traditional methods aiming at correcting RM to obtain CI mainly considers the narrow-band radar condit...The detection of hypersonic targets usually confronts range migration(RM)issue before coherent integration(CI).The traditional methods aiming at correcting RM to obtain CI mainly considers the narrow-band radar condition.However,with the increasing requirement of far-range detection,the time bandwidth product,which is corresponding to radar’s mean power,should be promoted in actual application.Thus,the echo signal generates the scale effect(SE)at large time bandwidth product situation,influencing the intra and inter pulse integration performance.To eliminate SE and correct RM,this paper proposes an effective algorithm,i.e.,scaled location rotation transform(ScLRT).The ScLRT can remove SE to obtain the matching pulse compression(PC)as well as correct RM to complete CI via the location rotation transform,being implemented by seeking the actual rotation angle.Compared to the traditional coherent detection algorithms,Sc LRT can address the SE problem to achieve better detection/estimation capabilities.At last,this paper gives several simulations to assess the viability of ScLRT.展开更多
The global diabetes surge poses a critical public health challenge,emphasizing the need for effective glycemic control.However,rapid correction of chronic hyperglycemia can unexpectedly trigger microvascular complicat...The global diabetes surge poses a critical public health challenge,emphasizing the need for effective glycemic control.However,rapid correction of chronic hyperglycemia can unexpectedly trigger microvascular complications,necessitating a reevaluation of the speed and intensity of glycemic correction.Theories suggest swift blood sugar reductions may cause inflammation,oxidative stress,and neurovascular changes,resulting in complications.Healthcare providers should cautiously approach aggressive glycemic control,especially in long-standing,poorly controlled diabetes.Preventing and managing these complications requires a personalized,comprehensive approach with education,monitoring,and interdisciplinary care.Diabetes management must balance short and longterm goals,prioritizing overall well-being.This editorial underscores the need for a personalized,nuanced approach,focusing on equilibrium between glycemic control and avoiding overcorrection.展开更多
In order to play a positive role of decentralised wind power on-grid for voltage stability improvement and loss reduction of distribution network,a multi-objective two-stage decentralised wind power planning method is...In order to play a positive role of decentralised wind power on-grid for voltage stability improvement and loss reduction of distribution network,a multi-objective two-stage decentralised wind power planning method is proposed in the paper,which takes into account the network loss correction for the extreme cold region.Firstly,an electro-thermal model is introduced to reflect the effect of temperature on conductor resistance and to correct the results of active network loss calculation;secondly,a two-stage multi-objective two-stage decentralised wind power siting and capacity allocation and reactive voltage optimisation control model is constructed to take account of the network loss correction,and the multi-objective multi-planning model is established in the first stage to consider the whole-life cycle investment cost of WTGs,the system operating cost and the voltage quality of power supply,and the multi-objective planning model is established in the second stage.planning model,and the second stage further develops the reactive voltage control strategy of WTGs on this basis,and obtains the distribution network loss reduction method based on WTG siting and capacity allocation and reactive power control strategy.Finally,the optimal configuration scheme is solved by the manta ray foraging optimisation(MRFO)algorithm,and the loss of each branch line and bus loss of the distribution network before and after the adoption of this loss reduction method is calculated by taking the IEEE33 distribution system as an example,which verifies the practicability and validity of the proposed method,and provides a reference introduction for decision-making for the distributed energy planning of the distribution network.展开更多
At present,one of the methods used to determine the height of points on the Earth’s surface is Global Navigation Satellite System(GNSS)leveling.It is possible to determine the orthometric or normal height by this met...At present,one of the methods used to determine the height of points on the Earth’s surface is Global Navigation Satellite System(GNSS)leveling.It is possible to determine the orthometric or normal height by this method only if there is a geoid or quasi-geoid height model available.This paper proposes the methodology for local correction of the heights of high-order global geoid models such as EGM08,EIGEN-6C4,GECO,and XGM2019e_2159.This methodology was tested in different areas of the research field,covering various relief forms.The dependence of the change in corrected height accuracy on the input data was analyzed,and the correction was also conducted for model heights in three tidal systems:"tide free","mean tide",and"zero tide".The results show that the heights of EIGEN-6C4 model can be corrected with an accuracy of up to 1 cm for flat and foothill terrains with the dimensionality of 1°×1°,2°×2°,and 3°×3°.The EGM08 model presents an almost identical result.The EIGEN-6C4 model is best suited for mountainous relief and provides an accuracy of 1.5 cm on the 1°×1°area.The height correction accuracy of GECO and XGM2019e_2159 models is slightly poor,which has fuzziness in terms of numerical fluctuation.展开更多
Objective:Accurate measurement of QT interval,the ventricular action potential from depolarization to repolarization,is important for the early detection of Long QT syndrome.The most effective QT correction(QTc)formul...Objective:Accurate measurement of QT interval,the ventricular action potential from depolarization to repolarization,is important for the early detection of Long QT syndrome.The most effective QT correction(QTc)formula has yet to be determined in the pediatric population,although it has intrinsically greater extremes in heart rate(HR)and is more susceptible to errors in measurement.The authors of this study compare six dif-ferent QTc methods(Bazett,Fridericia,Framingham,Hodges,Rautaharju,and a computer algorithm utilizing the Bazett formula)for consistency against variations in HR and RR interval.Methods:Descriptive Retrospective Study.We included participants from a pediatric cardiology practice of a community hospital who had an ECG performed in 2017.All participants were healthy patients with no past medical history and no regular med-ications.Results:ECGs from 95 participants from one month to 21 years of age(mean 9.7 years)were included with a mean HR of 91 beats per minute(bpm).The two-sample paired t-test or Wilcoxon signed-rank test assessed for any difference between QTc methods.A statistically significant difference was observed between every combination of two QTc formulae.The Spearman’s rank correlation analysis explored the QTc/HR and QTc/RR relationships for each formula.Fridericia method was most independent of HR and RR with the lowest absolute value of correlation coefficients.Bazett and Computer had moderate correlations,while Framingham and Rautaharju exhibited strong correlations.Correlations were positive for Bazett and Computer,reflecting results from prior studies demonstrating an over-correction of Bazett at higher HRs.In the linear QTc/HR regression analysis,Bazett had the slope closest to zero,although Computer,Hodges,and Fridericia had comparable values.Alternatively,Fridericia had the linear QTc/RR regression coefficient closest to zero.The Bland-Altman method assessed for bias and the limits of agreement between correction formulae.Bazett and Computer exhibited good agreement with minimal bias along with Framingham and Rautaharju.To account for a possible skewed distri-bution of QT,all the above analyses were also performed excluding the top and bottom 2%of data as sorted by heart rate ranges(N=90).Results from this data set were consistent with those derived from all participants(N=95).Conclusions:Overall,the Fridericia correction method provided the best rate correction in our pedia-tric study cohort.展开更多
Machine learning models were used to improve the accuracy of China Meteorological Administration Multisource Precipitation Analysis System(CMPAS)in complex terrain areas by combining rain gauge precipitation with topo...Machine learning models were used to improve the accuracy of China Meteorological Administration Multisource Precipitation Analysis System(CMPAS)in complex terrain areas by combining rain gauge precipitation with topographic factors like altitude,slope,slope direction,slope variability,surface roughness,and meteorological factors like temperature and wind speed.The results of the correction demonstrated that the ensemble learning method has a considerably corrective effect and the three methods(Random Forest,AdaBoost,and Bagging)adopted in the study had similar results.The mean bias between CMPAS and 85%of automatic weather stations has dropped by more than 30%.The plateau region displays the largest accuracy increase,the winter season shows the greatest error reduction,and decreasing precipitation improves the correction outcome.Additionally,the heavy precipitation process’precision has improved to some degree.For individual stations,the revised CMPAS error fluctuation range is significantly reduced.展开更多
Objective:To observe whether the Ear Well infant ear correction system makes any difference in terms of the treatment effect,duration,complication rate,and nursing care requirements in different types of infant auricl...Objective:To observe whether the Ear Well infant ear correction system makes any difference in terms of the treatment effect,duration,complication rate,and nursing care requirements in different types of infant auricle deformities.Methods:A total of 93 infant patients with auricular deformity(age:<3 months of age)who were diagnosed and treated in Guangzhou Children and Women’s Medical Center from April 2018 to September 2020 were selected and treated with the Ear Well infant ear correction system.We observed and recorded the effects of the Ear Well infant ear correction system,the treatment duration,the number of rebound cases,and complications that are likely to occur during treatment,and noted the related factors causing complications and the relative requirements for nursing care.Results:The Earwell infant ear correction system could effectively correct infant auricle deformities.Among the 93 cases,90 cases had positive therapeutical outcome and the effective rate was 96.77%.The treatment duration for lop ear and protruding ear was longer than for other auricle deformities;the deformity recoil and the treatment compilation rates were much higher for these 2 deformity types,and the difference was statistically significant(P<0.05).Conclusions:The treatment suggestion for the wearing duration of the Ear Well infant ear correction system for lop ear and protruding ear is a prolonged duration compared with that for other infant auricle deformities.Fur ther,the requirements for nursing care intensity and infant patient’s guardian’s nursing knowledge and skill are obviously increased for these 2 types of auricle deformities.展开更多
Standard automatic dependent surveillance broadcast (ADS-B) reception algorithms offer considerable performance at high signal-to-noise ratios (SNRs). However, the performance of ADS-B algorithms in applications can b...Standard automatic dependent surveillance broadcast (ADS-B) reception algorithms offer considerable performance at high signal-to-noise ratios (SNRs). However, the performance of ADS-B algorithms in applications can be problematic at low SNRs and in high interference situations, as detecting and decoding techniques may not perform correctly in such circumstances. In addition, conventional error correction algorithms have limitations in their ability to correct errors in ADS-B messages, as the bit and confidence values may be declared inaccurately in the event of low SNRs and high interference. The principal goal of this paper is to deploy a Long Short-Term Memory (LSTM) recurrent neural network model for error correction in conjunction with a conventional algorithm. The data of various flights are collected and cleaned in an initial stage. The clean data is divided randomly into training and test sets. Next, the LSTM model is trained based on the training dataset, and then the model is evaluated based on the test dataset. The proposed model not only improves the ADS-B In packet error correction rate (PECR), but it also enhances the ADS-B In terms of sensitivity. The performance evaluation results reveal that the proposed scheme is achievable and efficient for the avionics industry. It is worth noting that the proposed algorithm is not dependent on conventional algorithms’ prerequisites.展开更多
AIM:To elucidate the safety and visual quality of implantable collamer lens with central hole(ICL V4c)implantation for correcting moderate and high myopia for at least 5y.METHODS:This retrospective study was conducted...AIM:To elucidate the safety and visual quality of implantable collamer lens with central hole(ICL V4c)implantation for correcting moderate and high myopia for at least 5y.METHODS:This retrospective study was conducted on 58 patients(114 eyes)who were followed up for at least 5y after ICL V4c implantation.The observation was done before and on 1d,1mo,1 and 5y or more after the surgical procedure.The visual acuity,subjective refraction,intraocular pressure,vault,axial length,central hole position,pupil diameter,visual quality,and adverse events were analyzed.The visual quality includes aberration,the modulation transfer function cutoff frequency(MTF cutoff),objective scattering index(OSI),Stroller's ratio(SR),and visual quality questionnaire.RESULTS:The average follow-up period was 69.25±3.80mo(range 60–82mo)and the preoperative spherical equivalent(SE)was-8.66±1.97 D.At 5y after operation,the safety index was 1.01±0.02 and the efficacy index was 0.99±0.42 and SE was-0.65±0.63 D.The 59.6%of the eyes achieved an uncorrected distance visual acuity of 20/20,76.3%of the eyes had SE within±1.0 D at the last visit.The axial length increased by 0.29±0.71 mm 5y after the surgery(t=-3.843,P<0.001).The mean vault at the last follow-up was 510.59±245.61μm.The central hole was on the temporal side in 80 eyes(84.2%).The visual quality questionnaire showed that 98.2%patients were satisfied with the surgical procedure.Adverse events occurred in 4 eyes(3.5%),including the posttraumatic toric ICL rotation(2 eyes),iris incarceration(1 eye),and posttraumatic ICL displacement(1 eye)at the last follow-up.CONCLUSION:Long-term ICL V4c implantation is safe,effective,and stable for correcting moderate and to high myopia,and the visual quality with patients is excellent and satisfactory,but the progression of axial length still needs attention after surgery.展开更多
The access of unified power flow controllers(UPFC)has changed the structure and operation mode of power grids all across the world,and it has brought severe challenges to the traditional real-time calculation of secur...The access of unified power flow controllers(UPFC)has changed the structure and operation mode of power grids all across the world,and it has brought severe challenges to the traditional real-time calculation of security correction based on traditionalmodels.Considering the limitation of computational efficiency regarding complex,physical models,a data-driven power system security correction method with UPFC is,in this paper,proposed.Based on the complex mapping relationship between the operation state data and the security correction strategy,a two-stage deep neural network(DNN)learning framework is proposed,which divides the offline training task of security correction into two stages:in the first stage,the stacked auto-encoder(SAE)classification model is established,and the node correction state(0/1)output based on the fault information;in the second stage,the DNN learningmodel is established,and the correction amount of each action node is obtained based on the action nodes output in the previous stage.In this paper,the UPFC demonstration project of NanjingWest Ring Network is taken as a case study to validate the proposed method.The results show that the proposed method can fully meet the real-time security correction time requirements of power grids,and avoid the inherent defects of the traditional model method without an iterative solution and can also provide reasonable security correction strategies for N-1 and N-2 faults.展开更多
Background: Neglected clubfoot in this series is defined as untreated equino-cavo-adducto-varus in older children or adults. Relapsed clubfoot is the residual deformity that remains after single or multiple surgical i...Background: Neglected clubfoot in this series is defined as untreated equino-cavo-adducto-varus in older children or adults. Relapsed clubfoot is the residual deformity that remains after single or multiple surgical interventions. Severely neglected clubfoot rarely exists today in developed countries, except in some emigrants from low- and middle-income countries. Acute surgical management with corrective mid-foot osteotomy and elongation of the Achilles tendon has an excellent functional outcome. Objective: To assess the functional outcome of acute correction of neglected Talipes-quinoa-varus deformity in adults. Methods: This is a cross-sectional, hospital–based multi-centric study. Forty patients were included in this study. Midfoot osteotomy and elongation of the Achilles tendon were performed on all patients. Data was collected using a questionnaire and the functional outcome has been assessed using the American Orthopedic Foot and Ankle Society Score (AOFAS). This score was measured before surgery and one year after surgery. Results: the mean age was 19.9 ± 4.7 years. Males were 25 (62.5%) and females were 15 (37.5%). The mean preoperative AOFAS score was 37.7 ± 7.1 (poor). This score improved to 80.7 ± 13.7 (good to excellent), two years after surgery. However, this indicates a significant change in the functional outcome after the operation (p value Conclusion: acute correction of neglected and relapsed TEV with elongation of the Achilles tendon and single midfoot osteotomy has excellent functional outcome as assessed by AOFAS Score. The satisfaction with this procedure is impressive. The younger age population showed better outcomes with this procedure.展开更多
In certain exceptional cases,capillary samples must be used to measure X-ray absorption spectra(XAS).However,the inho-mogeneous thickness of capillary samples causes XAS distortion.This study discusses the distortion ...In certain exceptional cases,capillary samples must be used to measure X-ray absorption spectra(XAS).However,the inho-mogeneous thickness of capillary samples causes XAS distortion.This study discusses the distortion and correction of the XAS curve caused by the inhomogeneous thickness of capillary samples.The relationship between the distorted XAS curveμ′d_(eq)(measured values)and the real absorption coefficientμ_(s)d_(eq)(true values)of the sample was established.The distortion was slight and negligible when the vertical size(2h)of the X-ray beam spot was smaller than 60%of the capillary tube’s inner diameter(2R_(in)).When h/R_(in)>1,X-ray leakage is inevitable and should be avoided during measurement.Partial X-ray leakage caused by an X-ray beam spot size larger than the inner diameter of the capillary tube leads to serious compressed distortion of the XAS curve.When h/R_(in)<1,the distorted XAS data were well corrected.Possible errors and their influence on the corrected XAS are also discussed.Simulations and corrections for distortions verify the feasibility and effectiveness of the corrected method.展开更多
The service cycle and dynamic performance of structural parts are afected by the weld grinding accuracy and surface consistency. Because of reasons such as assembly errors and thermal deformation, the actual track of ...The service cycle and dynamic performance of structural parts are afected by the weld grinding accuracy and surface consistency. Because of reasons such as assembly errors and thermal deformation, the actual track of the robot does not coincide with the theoretical track when the weld is ground ofine, resulting in poor workpiece surface quality. Considering these problems, in this study, a vision sensing-based online correction system for robotic weld grinding was developed. The system mainly included three subsystems: weld feature extraction, grinding, and robot real-time control. The grinding equipment was frst set as a substation for the robot using the WorkVisual software. The input/output (I/O) ports for communication between the robot and the grinding equipment were confgured via the I/O mapping function to enable the robot to control the grinding equipment (start, stop, and speed control). Subsequently, the Ethernet KRL software package was used to write the data interaction structure to realize realtime communication between the robot and the laser vision system. To correct the measurement error caused by the bending deformation of the workpiece, we established a surface profle model of the base material in the weld area using a polynomial ftting algorithm to compensate for the measurement data. The corrected extracted weld width and height errors were reduced by 2.01% and 9.3%, respectively. Online weld seam extraction and correction experiments verifed the efectiveness of the system’s correction function, and the system could control the grinding trajectory error within 0.2 mm. The reliability of the system was verifed through actual weld grinding experiments. The roughness, Ra, could reach 0.504 µm and the average residual height was within 0.21 mm. In this study, we developed a vision sensing-based online correction system for robotic weld grinding with a good correction efect and high robustness.展开更多
文摘In order to obtain more accurate precipitation data and better simulate the precipitation on the Tibetan Plateau,the simulation capability of 14 Coupled Model Intercomparison Project Phase 6(CMIP6)models of historical precipitation(1982-2014)on the Qinghai-Tibetan Plateau was evaluated in this study.Results indicate that all models exhibit an overestimation of precipitation through the analysis of the Taylor index,temporal and spatial statistical parameters.To correct the overestimation,a fusion correction method combining the Backpropagation Neural Network Correction(BP)and Quantum Mapping(QM)correction,named BQ method,was proposed.With this method,the historical precipitation of each model was corrected in space and time,respectively.The correction results were then analyzed in time,space,and analysis of variance(ANOVA)with those corrected by the BP and QM methods,respectively.Finally,the fusion correction method results for each model were compared with the Climatic Research Unit(CRU)data for significance analysis to obtain the trends of precipitation increase and decrease for each model.The results show that the IPSL-CM6A-LR model is relatively good in simulating historical precipitation on the Qinghai-Tibetan Plateau(R=0.7,RSME=0.15)among the uncorrected data.In terms of time,the total precipitation corrected by the fusion method has the same interannual trend and the closest precipitation values to the CRU data;In terms of space,the annual average precipitation corrected by the fusion method has the smallest difference with the CRU data,and the total historical annual average precipitation is not significantly different from the CRU data,which is better than BP and QM.Therefore,the correction effect of the fusion method on the historical precipitation of each model is better than that of the QM and BP methods.The precipitation in the central and northeastern parts of the plateau shows a significant increasing trend.The correlation coefficients between monthly precipitation and site-detected precipitation for all models after BQ correction exceed 0.8.
文摘Objective: This study aims to evaluate the efficacy and safety of using a strip-shaped cymba conchae orthosis for the nonsurgical correction of complex auricular deformities. Methods: Clinical data were collected from 2020 to 2021 for 6 patients who underwent correction using a stripshaped cymba conchae orthosis. The indications, corrective effects, and complications associated with use of the orthosis were analyzed. Results: There were four indications for treatment: cryptotia with helix adhesion;cryptotia with grade I microtia;cryptotia with excessive helix thickness;and auricular deformity beyond the treatment time window(≥6 months). Excellent corrective effects were observed in all 6 patients. Complications occurred in one patient, who recovered after symptomatic treatment. Conclusion: The use of a strip-shaped cymba conchae orthosis alone or combined with a U-shaped helix orthosis presents a feasible approach for correcting complex auricular deformities or deformities beyond the treatment time window in pediatric patients.
基金supported in part by the National Natural Science Foundation of China(Nos.62071441 and 61701464)in part by the Fundamental Research Funds for the Central Universities(No.202151006).
文摘This study explores the application of single photon detection(SPD)technology in underwater wireless optical communication(UWOC)and analyzes the influence of different modulation modes and error correction coding types on communication performance.The study investigates the impact of on-off keying(OOK)and 2-pulse-position modulation(2-PPM)on the bit error rate(BER)in single-channel intensity and polarization multiplexing.Furthermore,it compares the error correction performance of low-density parity check(LDPC)and Reed-Solomon(RS)codes across different error correction coding types.The effects of unscattered photon ratio and depolarization ratio on BER are also verified.Finally,a UWOC system based on SPD is constructed,achieving 14.58 Mbps with polarization OOK multiplexing modulation and 4.37 Mbps with polarization 2-PPM multiplexing modulation using LDPC code error correction.
基金the National Natural Science Foundation of China(Grant No.61973033)Preliminary Research of Equipment(Grant No.9090102010305)for funding the experiments。
文摘The longitudinal dispersion of the projectile in shooting tests of two-dimensional trajectory corrections fused with fixed canards is extremely large that it sometimes exceeds the correction ability of the correction fuse actuator.The impact point easily deviates from the target,and thus the correction result cannot be readily evaluated.However,the cost of shooting tests is considerably high to conduct many tests for data collection.To address this issue,this study proposes an aiming method for shooting tests based on small sample size.The proposed method uses the Bootstrap method to expand the test data;repeatedly iterates and corrects the position of the simulated theoretical impact points through an improved compatibility test method;and dynamically adjusts the weight of the prior distribution of simulation results based on Kullback-Leibler divergence,which to some extent avoids the real data being"submerged"by the simulation data and achieves the fusion Bayesian estimation of the dispersion center.The experimental results show that when the simulation accuracy is sufficiently high,the proposed method yields a smaller mean-square deviation in estimating the dispersion center and higher shooting accuracy than those of the three comparison methods,which is more conducive to reflecting the effect of the control algorithm and facilitating test personnel to iterate their proposed structures and algorithms.;in addition,this study provides a knowledge base for further comprehensive studies in the future.
文摘In the original publication the third author name is published incorrectly as“Hayatdavoodi Masoud”.The correct author name should be read as“Masoud Hayatdavoodi”.The correct author name is available in this correction.
基金Project supported by the Natural Science Foundation of Zhejiang Province,China (Grant No.LY14A030001)。
文摘We calculate the thermodynamic quantities in the quantum corrected Reissner-Nordstr?m-AdS(RN-AdS)black hole,and examine their quantum corrections.By analyzing the mass and heat capacity,we give the critical state and the remnant state,respectively,and discuss their consistency.Then,we investigate the quantum tunneling from the event horizon of massless scalar particle by using the null geodesic method,and charged massive boson W^(±)and fermions by using the Hamilton-Jacob method.It is shown that the same Hawking temperature can be obtained from these tunneling processes of different particles and methods.Next,by using the generalized uncertainty principle(GUP),we study the quantum corrections to the tunneling and the temperature.Then the logarithmic correction to the black hole entropy is obtained.
基金supported by the National Natural Science Foundation of China(62101099)the Chinese Postdoctoral Science Foundation(2021M690558,2022T150100,2018M633352,2019T120825)+3 种基金the Young Elite Scientist Sponsorship Program(YESS20200082)the Aeronautical Science Foundation of China(2022Z017080001)the Open Foundation of Science and Technology on Electronic Information Control Laboratorythe Natural Science Foundation of Sichuan Province(2023NSFSC1386)。
文摘The detection of hypersonic targets usually confronts range migration(RM)issue before coherent integration(CI).The traditional methods aiming at correcting RM to obtain CI mainly considers the narrow-band radar condition.However,with the increasing requirement of far-range detection,the time bandwidth product,which is corresponding to radar’s mean power,should be promoted in actual application.Thus,the echo signal generates the scale effect(SE)at large time bandwidth product situation,influencing the intra and inter pulse integration performance.To eliminate SE and correct RM,this paper proposes an effective algorithm,i.e.,scaled location rotation transform(ScLRT).The ScLRT can remove SE to obtain the matching pulse compression(PC)as well as correct RM to complete CI via the location rotation transform,being implemented by seeking the actual rotation angle.Compared to the traditional coherent detection algorithms,Sc LRT can address the SE problem to achieve better detection/estimation capabilities.At last,this paper gives several simulations to assess the viability of ScLRT.
文摘The global diabetes surge poses a critical public health challenge,emphasizing the need for effective glycemic control.However,rapid correction of chronic hyperglycemia can unexpectedly trigger microvascular complications,necessitating a reevaluation of the speed and intensity of glycemic correction.Theories suggest swift blood sugar reductions may cause inflammation,oxidative stress,and neurovascular changes,resulting in complications.Healthcare providers should cautiously approach aggressive glycemic control,especially in long-standing,poorly controlled diabetes.Preventing and managing these complications requires a personalized,comprehensive approach with education,monitoring,and interdisciplinary care.Diabetes management must balance short and longterm goals,prioritizing overall well-being.This editorial underscores the need for a personalized,nuanced approach,focusing on equilibrium between glycemic control and avoiding overcorrection.
基金supported by the National Natural Science Foundation of China(52177081).
文摘In order to play a positive role of decentralised wind power on-grid for voltage stability improvement and loss reduction of distribution network,a multi-objective two-stage decentralised wind power planning method is proposed in the paper,which takes into account the network loss correction for the extreme cold region.Firstly,an electro-thermal model is introduced to reflect the effect of temperature on conductor resistance and to correct the results of active network loss calculation;secondly,a two-stage multi-objective two-stage decentralised wind power siting and capacity allocation and reactive voltage optimisation control model is constructed to take account of the network loss correction,and the multi-objective multi-planning model is established in the first stage to consider the whole-life cycle investment cost of WTGs,the system operating cost and the voltage quality of power supply,and the multi-objective planning model is established in the second stage.planning model,and the second stage further develops the reactive voltage control strategy of WTGs on this basis,and obtains the distribution network loss reduction method based on WTG siting and capacity allocation and reactive power control strategy.Finally,the optimal configuration scheme is solved by the manta ray foraging optimisation(MRFO)algorithm,and the loss of each branch line and bus loss of the distribution network before and after the adoption of this loss reduction method is calculated by taking the IEEE33 distribution system as an example,which verifies the practicability and validity of the proposed method,and provides a reference introduction for decision-making for the distributed energy planning of the distribution network.
基金the International Center for Global Earth Models(ICGEM)for the height anomaly and gravity anomaly data and Bureau Gravimetrique International(BGI)for free-air gravity anomaly data from the World Gravity Map project(WGM2012)The authors are grateful to Głowny Urza˛d Geodezji i Kartografii of Poland for the height anomaly data of the quasi-geoid PL-geoid2021.
文摘At present,one of the methods used to determine the height of points on the Earth’s surface is Global Navigation Satellite System(GNSS)leveling.It is possible to determine the orthometric or normal height by this method only if there is a geoid or quasi-geoid height model available.This paper proposes the methodology for local correction of the heights of high-order global geoid models such as EGM08,EIGEN-6C4,GECO,and XGM2019e_2159.This methodology was tested in different areas of the research field,covering various relief forms.The dependence of the change in corrected height accuracy on the input data was analyzed,and the correction was also conducted for model heights in three tidal systems:"tide free","mean tide",and"zero tide".The results show that the heights of EIGEN-6C4 model can be corrected with an accuracy of up to 1 cm for flat and foothill terrains with the dimensionality of 1°×1°,2°×2°,and 3°×3°.The EGM08 model presents an almost identical result.The EIGEN-6C4 model is best suited for mountainous relief and provides an accuracy of 1.5 cm on the 1°×1°area.The height correction accuracy of GECO and XGM2019e_2159 models is slightly poor,which has fuzziness in terms of numerical fluctuation.
基金This study was reviewed and approved by the New York-Presbyterian Brooklyn Methodist Hospital Institutional Review Committee.The study follows the guidelines outlined in the Declaration of Helsinki.
文摘Objective:Accurate measurement of QT interval,the ventricular action potential from depolarization to repolarization,is important for the early detection of Long QT syndrome.The most effective QT correction(QTc)formula has yet to be determined in the pediatric population,although it has intrinsically greater extremes in heart rate(HR)and is more susceptible to errors in measurement.The authors of this study compare six dif-ferent QTc methods(Bazett,Fridericia,Framingham,Hodges,Rautaharju,and a computer algorithm utilizing the Bazett formula)for consistency against variations in HR and RR interval.Methods:Descriptive Retrospective Study.We included participants from a pediatric cardiology practice of a community hospital who had an ECG performed in 2017.All participants were healthy patients with no past medical history and no regular med-ications.Results:ECGs from 95 participants from one month to 21 years of age(mean 9.7 years)were included with a mean HR of 91 beats per minute(bpm).The two-sample paired t-test or Wilcoxon signed-rank test assessed for any difference between QTc methods.A statistically significant difference was observed between every combination of two QTc formulae.The Spearman’s rank correlation analysis explored the QTc/HR and QTc/RR relationships for each formula.Fridericia method was most independent of HR and RR with the lowest absolute value of correlation coefficients.Bazett and Computer had moderate correlations,while Framingham and Rautaharju exhibited strong correlations.Correlations were positive for Bazett and Computer,reflecting results from prior studies demonstrating an over-correction of Bazett at higher HRs.In the linear QTc/HR regression analysis,Bazett had the slope closest to zero,although Computer,Hodges,and Fridericia had comparable values.Alternatively,Fridericia had the linear QTc/RR regression coefficient closest to zero.The Bland-Altman method assessed for bias and the limits of agreement between correction formulae.Bazett and Computer exhibited good agreement with minimal bias along with Framingham and Rautaharju.To account for a possible skewed distri-bution of QT,all the above analyses were also performed excluding the top and bottom 2%of data as sorted by heart rate ranges(N=90).Results from this data set were consistent with those derived from all participants(N=95).Conclusions:Overall,the Fridericia correction method provided the best rate correction in our pedia-tric study cohort.
基金Program of Science and Technology Department of Sichuan Province(2022YFS0541-02)Program of Heavy Rain and Drought-flood Disasters in Plateau and Basin Key Laboratory of Sichuan Province(SCQXKJQN202121)Innovative Development Program of the China Meteorological Administration(CXFZ2021Z007)。
文摘Machine learning models were used to improve the accuracy of China Meteorological Administration Multisource Precipitation Analysis System(CMPAS)in complex terrain areas by combining rain gauge precipitation with topographic factors like altitude,slope,slope direction,slope variability,surface roughness,and meteorological factors like temperature and wind speed.The results of the correction demonstrated that the ensemble learning method has a considerably corrective effect and the three methods(Random Forest,AdaBoost,and Bagging)adopted in the study had similar results.The mean bias between CMPAS and 85%of automatic weather stations has dropped by more than 30%.The plateau region displays the largest accuracy increase,the winter season shows the greatest error reduction,and decreasing precipitation improves the correction outcome.Additionally,the heavy precipitation process’precision has improved to some degree.For individual stations,the revised CMPAS error fluctuation range is significantly reduced.
基金supported by the National Key Research and Development Program of China[grant number 2020YFA0608000]the National Natural Science Foundation of China[grant number 42075141]+2 种基金the Meteorological Joint Funds of the National Natural Science Foundation of China[grant number U2142211]the Key Project Fund of the Shanghai 2020“Science and Technology Innovation Action Plan”for Social Development[grant number 20dz1200702]the first batch of Model Interdisciplinary Joint Research Projects of Tongji University in 2021[grant number YB-21-202110].
文摘Objective:To observe whether the Ear Well infant ear correction system makes any difference in terms of the treatment effect,duration,complication rate,and nursing care requirements in different types of infant auricle deformities.Methods:A total of 93 infant patients with auricular deformity(age:<3 months of age)who were diagnosed and treated in Guangzhou Children and Women’s Medical Center from April 2018 to September 2020 were selected and treated with the Ear Well infant ear correction system.We observed and recorded the effects of the Ear Well infant ear correction system,the treatment duration,the number of rebound cases,and complications that are likely to occur during treatment,and noted the related factors causing complications and the relative requirements for nursing care.Results:The Earwell infant ear correction system could effectively correct infant auricle deformities.Among the 93 cases,90 cases had positive therapeutical outcome and the effective rate was 96.77%.The treatment duration for lop ear and protruding ear was longer than for other auricle deformities;the deformity recoil and the treatment compilation rates were much higher for these 2 deformity types,and the difference was statistically significant(P<0.05).Conclusions:The treatment suggestion for the wearing duration of the Ear Well infant ear correction system for lop ear and protruding ear is a prolonged duration compared with that for other infant auricle deformities.Fur ther,the requirements for nursing care intensity and infant patient’s guardian’s nursing knowledge and skill are obviously increased for these 2 types of auricle deformities.
文摘Standard automatic dependent surveillance broadcast (ADS-B) reception algorithms offer considerable performance at high signal-to-noise ratios (SNRs). However, the performance of ADS-B algorithms in applications can be problematic at low SNRs and in high interference situations, as detecting and decoding techniques may not perform correctly in such circumstances. In addition, conventional error correction algorithms have limitations in their ability to correct errors in ADS-B messages, as the bit and confidence values may be declared inaccurately in the event of low SNRs and high interference. The principal goal of this paper is to deploy a Long Short-Term Memory (LSTM) recurrent neural network model for error correction in conjunction with a conventional algorithm. The data of various flights are collected and cleaned in an initial stage. The clean data is divided randomly into training and test sets. Next, the LSTM model is trained based on the training dataset, and then the model is evaluated based on the test dataset. The proposed model not only improves the ADS-B In packet error correction rate (PECR), but it also enhances the ADS-B In terms of sensitivity. The performance evaluation results reveal that the proposed scheme is achievable and efficient for the avionics industry. It is worth noting that the proposed algorithm is not dependent on conventional algorithms’ prerequisites.
基金Supported by the Science and Technology Innovation Program of Hunan Province,China(No.2020SK50103)Hunan Clinical Medical Technology Innovation Guiding Project in 2020。
文摘AIM:To elucidate the safety and visual quality of implantable collamer lens with central hole(ICL V4c)implantation for correcting moderate and high myopia for at least 5y.METHODS:This retrospective study was conducted on 58 patients(114 eyes)who were followed up for at least 5y after ICL V4c implantation.The observation was done before and on 1d,1mo,1 and 5y or more after the surgical procedure.The visual acuity,subjective refraction,intraocular pressure,vault,axial length,central hole position,pupil diameter,visual quality,and adverse events were analyzed.The visual quality includes aberration,the modulation transfer function cutoff frequency(MTF cutoff),objective scattering index(OSI),Stroller's ratio(SR),and visual quality questionnaire.RESULTS:The average follow-up period was 69.25±3.80mo(range 60–82mo)and the preoperative spherical equivalent(SE)was-8.66±1.97 D.At 5y after operation,the safety index was 1.01±0.02 and the efficacy index was 0.99±0.42 and SE was-0.65±0.63 D.The 59.6%of the eyes achieved an uncorrected distance visual acuity of 20/20,76.3%of the eyes had SE within±1.0 D at the last visit.The axial length increased by 0.29±0.71 mm 5y after the surgery(t=-3.843,P<0.001).The mean vault at the last follow-up was 510.59±245.61μm.The central hole was on the temporal side in 80 eyes(84.2%).The visual quality questionnaire showed that 98.2%patients were satisfied with the surgical procedure.Adverse events occurred in 4 eyes(3.5%),including the posttraumatic toric ICL rotation(2 eyes),iris incarceration(1 eye),and posttraumatic ICL displacement(1 eye)at the last follow-up.CONCLUSION:Long-term ICL V4c implantation is safe,effective,and stable for correcting moderate and to high myopia,and the visual quality with patients is excellent and satisfactory,but the progression of axial length still needs attention after surgery.
基金supported in part by Science and Technology Projects of Electric Power Research Institute of State Grid Jiangsu Electric Power Co.,Ltd.(J2021171).
文摘The access of unified power flow controllers(UPFC)has changed the structure and operation mode of power grids all across the world,and it has brought severe challenges to the traditional real-time calculation of security correction based on traditionalmodels.Considering the limitation of computational efficiency regarding complex,physical models,a data-driven power system security correction method with UPFC is,in this paper,proposed.Based on the complex mapping relationship between the operation state data and the security correction strategy,a two-stage deep neural network(DNN)learning framework is proposed,which divides the offline training task of security correction into two stages:in the first stage,the stacked auto-encoder(SAE)classification model is established,and the node correction state(0/1)output based on the fault information;in the second stage,the DNN learningmodel is established,and the correction amount of each action node is obtained based on the action nodes output in the previous stage.In this paper,the UPFC demonstration project of NanjingWest Ring Network is taken as a case study to validate the proposed method.The results show that the proposed method can fully meet the real-time security correction time requirements of power grids,and avoid the inherent defects of the traditional model method without an iterative solution and can also provide reasonable security correction strategies for N-1 and N-2 faults.
文摘Background: Neglected clubfoot in this series is defined as untreated equino-cavo-adducto-varus in older children or adults. Relapsed clubfoot is the residual deformity that remains after single or multiple surgical interventions. Severely neglected clubfoot rarely exists today in developed countries, except in some emigrants from low- and middle-income countries. Acute surgical management with corrective mid-foot osteotomy and elongation of the Achilles tendon has an excellent functional outcome. Objective: To assess the functional outcome of acute correction of neglected Talipes-quinoa-varus deformity in adults. Methods: This is a cross-sectional, hospital–based multi-centric study. Forty patients were included in this study. Midfoot osteotomy and elongation of the Achilles tendon were performed on all patients. Data was collected using a questionnaire and the functional outcome has been assessed using the American Orthopedic Foot and Ankle Society Score (AOFAS). This score was measured before surgery and one year after surgery. Results: the mean age was 19.9 ± 4.7 years. Males were 25 (62.5%) and females were 15 (37.5%). The mean preoperative AOFAS score was 37.7 ± 7.1 (poor). This score improved to 80.7 ± 13.7 (good to excellent), two years after surgery. However, this indicates a significant change in the functional outcome after the operation (p value Conclusion: acute correction of neglected and relapsed TEV with elongation of the Achilles tendon and single midfoot osteotomy has excellent functional outcome as assessed by AOFAS Score. The satisfaction with this procedure is impressive. The younger age population showed better outcomes with this procedure.
基金the National Key R&D Program of China(Nos.2022YFA1603802 and 2017YFA0403000)1W2B and 4B9A at the Beijing Synchrotron Radiation Facility.
文摘In certain exceptional cases,capillary samples must be used to measure X-ray absorption spectra(XAS).However,the inho-mogeneous thickness of capillary samples causes XAS distortion.This study discusses the distortion and correction of the XAS curve caused by the inhomogeneous thickness of capillary samples.The relationship between the distorted XAS curveμ′d_(eq)(measured values)and the real absorption coefficientμ_(s)d_(eq)(true values)of the sample was established.The distortion was slight and negligible when the vertical size(2h)of the X-ray beam spot was smaller than 60%of the capillary tube’s inner diameter(2R_(in)).When h/R_(in)>1,X-ray leakage is inevitable and should be avoided during measurement.Partial X-ray leakage caused by an X-ray beam spot size larger than the inner diameter of the capillary tube leads to serious compressed distortion of the XAS curve.When h/R_(in)<1,the distorted XAS data were well corrected.Possible errors and their influence on the corrected XAS are also discussed.Simulations and corrections for distortions verify the feasibility and effectiveness of the corrected method.
基金Supported by Hunan Provincial Natural Science Foundation of China(Grant No.2021JJ50116).
文摘The service cycle and dynamic performance of structural parts are afected by the weld grinding accuracy and surface consistency. Because of reasons such as assembly errors and thermal deformation, the actual track of the robot does not coincide with the theoretical track when the weld is ground ofine, resulting in poor workpiece surface quality. Considering these problems, in this study, a vision sensing-based online correction system for robotic weld grinding was developed. The system mainly included three subsystems: weld feature extraction, grinding, and robot real-time control. The grinding equipment was frst set as a substation for the robot using the WorkVisual software. The input/output (I/O) ports for communication between the robot and the grinding equipment were confgured via the I/O mapping function to enable the robot to control the grinding equipment (start, stop, and speed control). Subsequently, the Ethernet KRL software package was used to write the data interaction structure to realize realtime communication between the robot and the laser vision system. To correct the measurement error caused by the bending deformation of the workpiece, we established a surface profle model of the base material in the weld area using a polynomial ftting algorithm to compensate for the measurement data. The corrected extracted weld width and height errors were reduced by 2.01% and 9.3%, respectively. Online weld seam extraction and correction experiments verifed the efectiveness of the system’s correction function, and the system could control the grinding trajectory error within 0.2 mm. The reliability of the system was verifed through actual weld grinding experiments. The roughness, Ra, could reach 0.504 µm and the average residual height was within 0.21 mm. In this study, we developed a vision sensing-based online correction system for robotic weld grinding with a good correction efect and high robustness.
