By applying switch-signal theory, the interaction between MOS transmission switch-ing transistor and current signal in current-mode CMOS circuits is analyzed, and the theory oftransmission current-switches which is su...By applying switch-signal theory, the interaction between MOS transmission switch-ing transistor and current signal in current-mode CMOS circuits is analyzed, and the theory oftransmission current-switches which is suitable to current-mode CMOS circuits is proposed. Thecircuits, such as ternary full-adder etc., designed by using this theory have simpler circuit struc-tures and correct logic functions. It is confirmed that this theory is efficient in guiding the logicdesign of current-mode CMOS circuits at switch level.展开更多
This paper presents a synthesis of current-mode PI, PD and PID controllers employing current controlled current differential buffer amplifiers (CCCDBAs). The features of these controllers are that: the output paramete...This paper presents a synthesis of current-mode PI, PD and PID controllers employing current controlled current differential buffer amplifiers (CCCDBAs). The features of these controllers are that: the output parameters can be electronically/independently controlled by adjusting corresponding bias currents in the proportional, integral, and deviation controllers;circuit description of the PID controller is simply formulated, it consists of four CCCDBAs cooperating with two grounded capacitors, and PI and PD controllers are composed of three CCCCDBAs and a grounded capacitor. Without any external resistor, the proposed circuits are very suitable to develop into integrated circuit architecture. The given results from the PSpice simulation agree well with the theoretical anticipation. The approximate power consumption in a closed loop control system consisting of the PI, PD and PID controller with low-pass filter passive plant are 4.03 mW, 4.85 mW and 5.71 mW, respectively, at ±1.5 V power supply voltages.展开更多
An electronically controllable fully uncoupled explicit current-mode quadrature oscillator employing Voltage Differencing Transconductance Amplifiers (VDTAs) as active elements has been presented. The proposed configu...An electronically controllable fully uncoupled explicit current-mode quadrature oscillator employing Voltage Differencing Transconductance Amplifiers (VDTAs) as active elements has been presented. The proposed configuration employs two VDTAs along with grounded capacitors and offers the following advantageous features 1) fully and electronically independent control of condition of oscillation (CO) and frequency of oscillation (FO);2) explicit current-mode quadrature oscillations;and 3) low active and passive sensitivities. The workability of proposed configuration has been demonstrated by PSPICE simulations with TSMC CMOS 0.18 μm process parameters.展开更多
One configuration for realizing voltage-mode multifunction filters and another configuration for realizing current-mode multifunction filters using current feedback amplifiers (CFAs) are presented. The proposed voltag...One configuration for realizing voltage-mode multifunction filters and another configuration for realizing current-mode multifunction filters using current feedback amplifiers (CFAs) are presented. The proposed voltage-mode circuit exhibit simultaneously lowpass and bandpass filters. The proposed current-mode circuit exhibit simultaneously lowpass, bandpass and highpass filters. The proposed circuits offer the following features: no requirements for component matching conditions;low active and passive sensitivities;employing only grounded capacitors and the ability to obtain multifunction filters from the same circuit configuration.展开更多
This article presents an active-only current-mode universal biquad filter performing three standard functions: low-pass, high-pass and band-pass function, which can be readily modified to achieve the rest functions (b...This article presents an active-only current-mode universal biquad filter performing three standard functions: low-pass, high-pass and band-pass function, which can be readily modified to achieve the rest functions (band-stop and all-pass). The circuit principle is based on active-only circuit designed by using differentiators which are constructed from current controlled current conveyor transconductance amplifier (CCCCTA) cooperating with an internally frequency compensated operational amplifier (OA). The features of the circuit are that: the pole frequency and quality factor can be independently tuned via the input bias currents and it is ideally temperature-insensitive, its circuit description is very simple, consisting of 3 CCCCTAs and 2 operational amplifiers, and the proposed circuit is very appropriate for further developing into integrated circuit architecture. The PSpice simulation results are shown. The given results agree well with the theoretical anticipation.展开更多
This paper presents a universal current-controlled current-mode biquad filter employing current controlled current conveyor trans-conductance amplifiers (CCCCTAs). The proposed filter employs only three MO- CCCCTAs an...This paper presents a universal current-controlled current-mode biquad filter employing current controlled current conveyor trans-conductance amplifiers (CCCCTAs). The proposed filter employs only three MO- CCCCTAs and two grounded capacitors. The proposed filter can simultaneously realize low pass (LP), band pass (BP), high pass (HP), band reject (BR) and all pass (AP) responses in current form by choosing appropriate current output branches. In addition, the pole frequency and quality factor of the proposed filter circuit can be tuned independently and electronically over the wide range by adjusting the external bias currents. The circuit possesses low active and passive sensitivity performance. The validity of proposed filter is verified through PSPICE simulations.展开更多
By applying switch-signal theory, the theory of transmission current-switches based on symmetric ternary logic is proposed, this theory is suitable to design symmetric ternary current-mode CMOS circuits. The symmetric...By applying switch-signal theory, the theory of transmission current-switches based on symmetric ternary logic is proposed, this theory is suitable to design symmetric ternary current-mode CMOS circuits. The symmetric ternary current-mode CMOS circuits designed by using this theory not only have simpler circuit structures and correct logic functions, but also can process bidirectional signals.展开更多
A versatile current-mode biquadratic filter using three operational amplifiers and nine passive elements is proposed. By suitably choosing the output branch, lowpass, bandpass, highpass, bandstop and allpass transfer ...A versatile current-mode biquadratic filter using three operational amplifiers and nine passive elements is proposed. By suitably choosing the output branch, lowpass, bandpass, highpass, bandstop and allpass transfer functions are realized simultaneously without changing the circuit configuration and elements. Two circuits, one is for low frequency application and the other for high frequency, are proposed. The center frequency, quality factor and gain constants of the circuit can be tuned independently. Simulated results show that the circuits work successfully.展开更多
Basing on the state variable method, a block diagram of the current-mode biquad active circuit was proposed, whose integrators were realized using three kinds of active elements such as operational amplifier, second g...Basing on the state variable method, a block diagram of the current-mode biquad active circuit was proposed, whose integrators were realized using three kinds of active elements such as operational amplifier, second generation current conveyors and operational transconduc-tance amplifiers-electric capacity. The characteristics of each circuit were analyzed.展开更多
A new universal multiple input multiple output (MIMO) type current-mode biquad employing two dual output current conveyors (DOCCII), one multiple output current controlled current amplifier (MOCCCA) and four passive g...A new universal multiple input multiple output (MIMO) type current-mode biquad employing two dual output current conveyors (DOCCII), one multiple output current controlled current amplifier (MOCCCA) and four passive grounded elements is proposed which can realize all the five basic filtering functions namely, low-pass (LP), high-pass (HP), band-pass (BP), band-stop (BR) and all-pass (AP) in current mode from the same configuration. The centre frequency can be set by the passive elements of the circuit and the quality factor Q0 is electronically tunable through bias currents of the MOCCCA. Therefore, the biquad filter has independent tenability for the and Q0. The active and passive sensitivities of Q0 and are low. The workability of the new configuration has been demonstrated by PSPICE simulation results based upon a CMOS CCII in0.35μm technology.展开更多
A current-mode low input and high output impedances first-order allpass filter using two multiple output second-generation current conveyors (MOCCIIs), one grounded capacitor and one grounded resistor is presented. Th...A current-mode low input and high output impedances first-order allpass filter using two multiple output second-generation current conveyors (MOCCIIs), one grounded capacitor and one grounded resistor is presented. The suggested filter uses a canonical number of passive components without requiring any component matching condition. The frequency responses simulation results of the proposed filter confirm the theoretical analysis.展开更多
This paper presents a new current-mode single input multi output (SIMO) type biquad employing one voltage differencing transconductance amplifier (VDTA), two grounded capacitors and a single grounded resistor. The con...This paper presents a new current-mode single input multi output (SIMO) type biquad employing one voltage differencing transconductance amplifier (VDTA), two grounded capacitors and a single grounded resistor. The configuration realizes all basic filter functions (i.e. Low Pass (LP), High Pass (HP), Band Pass (BP), Notch (BR) and All Pass (AP)). The natural frequency (ω0) and bandwidth (BW) are independently tunable. The workability of proposed configuration has been verified using SPICE simulation with TSMC CMOS 0.18 μm process parameters.展开更多
A state variable method of converting single-resistance-controlled- oscillators (SRCO), into universal current-mode biquad (offering realizations of all the five standard filter functions namely, low pass, band pass, ...A state variable method of converting single-resistance-controlled- oscillators (SRCO), into universal current-mode biquad (offering realizations of all the five standard filter functions namely, low pass, band pass, high pass, notch and all pass) has been highlighted. The workability of the exemplary implementation of the derived current-mode universal biquad has been demonstrated by PSPICE simulation results based upon 0.35 μ m technology. It is expected that the proposed method can be applied to other SRCOs to generate other multifunction filter structures.展开更多
A chaos control strategy for chaotic current-mode boost converter is presented by using inductor current sampled feedback control technique.The quantitative analysis of control mechanism is performed by establishing a...A chaos control strategy for chaotic current-mode boost converter is presented by using inductor current sampled feedback control technique.The quantitative analysis of control mechanism is performed by establishing a discrete alterative map of the controlled system.The stability criterion,feedback gain,and corresponding critical duty ratio are obtained from the eigenvalue of the map.The simulation results verify the t heoretical analysis results of the control strategy.展开更多
In this paper a novel log-domain current-mode integrator based on MOS transistors in subthreshold is proposed. The integrator's time-constant is tunable by varying a reference bias current. By use of the integrato...In this paper a novel log-domain current-mode integrator based on MOS transistors in subthreshold is proposed. The integrator's time-constant is tunable by varying a reference bias current. By use of the integrator, a fifth-order Chebyshev lowpass filter with 0.1dB ripples is designed. The simulation results demonstrate that the proposed filter has such advantages as low power supply(1.5V), very low power dissipation (μW level), nearly ideal frequency response, very small sensitivity to components in passband, and adjustable cut-off frequency over a wide range.The circuit is composed of NMOS transistors and grounded capacitors which make it suitable for fully integrated circuit implementation.展开更多
A complete state variable current-mode biquadratic filter built by duo-output CCII (DOCCII) with variable current gain is presented. All the coefficients of the filter can be independently tuned through the variable c...A complete state variable current-mode biquadratic filter built by duo-output CCII (DOCCII) with variable current gain is presented. All the coefficients of the filter can be independently tuned through the variable current gain factors of the DOCCII. Based on the principles upon which the general biquadratic filter was constructed, a universal electronically tunable current-mode filter is proposed which implements the low-pass, high-pass, band-pass, band-suppress and all-pass second order transfer functions simultaneously. The PSPICE simulations of frequency responses of second-order filter of are also given.展开更多
Five new electronically-controllable second order current-mode sinusoidal oscillators using three mul-ti-output operational transconductance amplifiers (MO-OTAs) and two grounded capacitors (GC) have been presented. S...Five new electronically-controllable second order current-mode sinusoidal oscillators using three mul-ti-output operational transconductance amplifiers (MO-OTAs) and two grounded capacitors (GC) have been presented. Simulation results are included to confirm the theoretical analysis based upon CMOS OTAs implementable in 0.5 μm technology.展开更多
In this work, an original Sallen-Key second-order low-pass filter is first turned into a current-mode one by means of the adjoint network theorem. Two nodal admittance matrices(NAM) of the filter are then educed. Furt...In this work, an original Sallen-Key second-order low-pass filter is first turned into a current-mode one by means of the adjoint network theorem. Two nodal admittance matrices(NAM) of the filter are then educed. Furthermore, these two matrices are expanded through NAM expansion approach, generating one current-mode Sallen-Key filter, which uses two compact voltage differential trans-conductance amplifiers(VDTAs) and two grounded capacitors, implements not only one low-pass transfer function but two band-pass transfer functions, and provides the non-interrelated control between the natural frequency and quality factor. As an example of the synthesized filter, a second-order VDTA filter with fo=1 MHz, Q=1, HLP=-HBP1=HBP2=1 is designed. The used synthesis approach has been confirmed with the help of circuit and computer analysis.展开更多
基金Supported by National Natural Science Foundation of China
文摘By applying switch-signal theory, the interaction between MOS transmission switch-ing transistor and current signal in current-mode CMOS circuits is analyzed, and the theory oftransmission current-switches which is suitable to current-mode CMOS circuits is proposed. Thecircuits, such as ternary full-adder etc., designed by using this theory have simpler circuit struc-tures and correct logic functions. It is confirmed that this theory is efficient in guiding the logicdesign of current-mode CMOS circuits at switch level.
文摘This paper presents a synthesis of current-mode PI, PD and PID controllers employing current controlled current differential buffer amplifiers (CCCDBAs). The features of these controllers are that: the output parameters can be electronically/independently controlled by adjusting corresponding bias currents in the proportional, integral, and deviation controllers;circuit description of the PID controller is simply formulated, it consists of four CCCDBAs cooperating with two grounded capacitors, and PI and PD controllers are composed of three CCCCDBAs and a grounded capacitor. Without any external resistor, the proposed circuits are very suitable to develop into integrated circuit architecture. The given results from the PSpice simulation agree well with the theoretical anticipation. The approximate power consumption in a closed loop control system consisting of the PI, PD and PID controller with low-pass filter passive plant are 4.03 mW, 4.85 mW and 5.71 mW, respectively, at ±1.5 V power supply voltages.
文摘An electronically controllable fully uncoupled explicit current-mode quadrature oscillator employing Voltage Differencing Transconductance Amplifiers (VDTAs) as active elements has been presented. The proposed configuration employs two VDTAs along with grounded capacitors and offers the following advantageous features 1) fully and electronically independent control of condition of oscillation (CO) and frequency of oscillation (FO);2) explicit current-mode quadrature oscillations;and 3) low active and passive sensitivities. The workability of proposed configuration has been demonstrated by PSPICE simulations with TSMC CMOS 0.18 μm process parameters.
文摘One configuration for realizing voltage-mode multifunction filters and another configuration for realizing current-mode multifunction filters using current feedback amplifiers (CFAs) are presented. The proposed voltage-mode circuit exhibit simultaneously lowpass and bandpass filters. The proposed current-mode circuit exhibit simultaneously lowpass, bandpass and highpass filters. The proposed circuits offer the following features: no requirements for component matching conditions;low active and passive sensitivities;employing only grounded capacitors and the ability to obtain multifunction filters from the same circuit configuration.
文摘This article presents an active-only current-mode universal biquad filter performing three standard functions: low-pass, high-pass and band-pass function, which can be readily modified to achieve the rest functions (band-stop and all-pass). The circuit principle is based on active-only circuit designed by using differentiators which are constructed from current controlled current conveyor transconductance amplifier (CCCCTA) cooperating with an internally frequency compensated operational amplifier (OA). The features of the circuit are that: the pole frequency and quality factor can be independently tuned via the input bias currents and it is ideally temperature-insensitive, its circuit description is very simple, consisting of 3 CCCCTAs and 2 operational amplifiers, and the proposed circuit is very appropriate for further developing into integrated circuit architecture. The PSpice simulation results are shown. The given results agree well with the theoretical anticipation.
文摘This paper presents a universal current-controlled current-mode biquad filter employing current controlled current conveyor trans-conductance amplifiers (CCCCTAs). The proposed filter employs only three MO- CCCCTAs and two grounded capacitors. The proposed filter can simultaneously realize low pass (LP), band pass (BP), high pass (HP), band reject (BR) and all pass (AP) responses in current form by choosing appropriate current output branches. In addition, the pole frequency and quality factor of the proposed filter circuit can be tuned independently and electronically over the wide range by adjusting the external bias currents. The circuit possesses low active and passive sensitivity performance. The validity of proposed filter is verified through PSPICE simulations.
基金National Natural Science Foundation of ChinaNatural science Foundation of Zhejiang Province
文摘By applying switch-signal theory, the theory of transmission current-switches based on symmetric ternary logic is proposed, this theory is suitable to design symmetric ternary current-mode CMOS circuits. The symmetric ternary current-mode CMOS circuits designed by using this theory not only have simpler circuit structures and correct logic functions, but also can process bidirectional signals.
文摘A versatile current-mode biquadratic filter using three operational amplifiers and nine passive elements is proposed. By suitably choosing the output branch, lowpass, bandpass, highpass, bandstop and allpass transfer functions are realized simultaneously without changing the circuit configuration and elements. Two circuits, one is for low frequency application and the other for high frequency, are proposed. The center frequency, quality factor and gain constants of the circuit can be tuned independently. Simulated results show that the circuits work successfully.
文摘Basing on the state variable method, a block diagram of the current-mode biquad active circuit was proposed, whose integrators were realized using three kinds of active elements such as operational amplifier, second generation current conveyors and operational transconduc-tance amplifiers-electric capacity. The characteristics of each circuit were analyzed.
文摘A new universal multiple input multiple output (MIMO) type current-mode biquad employing two dual output current conveyors (DOCCII), one multiple output current controlled current amplifier (MOCCCA) and four passive grounded elements is proposed which can realize all the five basic filtering functions namely, low-pass (LP), high-pass (HP), band-pass (BP), band-stop (BR) and all-pass (AP) in current mode from the same configuration. The centre frequency can be set by the passive elements of the circuit and the quality factor Q0 is electronically tunable through bias currents of the MOCCCA. Therefore, the biquad filter has independent tenability for the and Q0. The active and passive sensitivities of Q0 and are low. The workability of the new configuration has been demonstrated by PSPICE simulation results based upon a CMOS CCII in0.35μm technology.
文摘A current-mode low input and high output impedances first-order allpass filter using two multiple output second-generation current conveyors (MOCCIIs), one grounded capacitor and one grounded resistor is presented. The suggested filter uses a canonical number of passive components without requiring any component matching condition. The frequency responses simulation results of the proposed filter confirm the theoretical analysis.
文摘This paper presents a new current-mode single input multi output (SIMO) type biquad employing one voltage differencing transconductance amplifier (VDTA), two grounded capacitors and a single grounded resistor. The configuration realizes all basic filter functions (i.e. Low Pass (LP), High Pass (HP), Band Pass (BP), Notch (BR) and All Pass (AP)). The natural frequency (ω0) and bandwidth (BW) are independently tunable. The workability of proposed configuration has been verified using SPICE simulation with TSMC CMOS 0.18 μm process parameters.
文摘A state variable method of converting single-resistance-controlled- oscillators (SRCO), into universal current-mode biquad (offering realizations of all the five standard filter functions namely, low pass, band pass, high pass, notch and all pass) has been highlighted. The workability of the exemplary implementation of the derived current-mode universal biquad has been demonstrated by PSPICE simulation results based upon 0.35 μ m technology. It is expected that the proposed method can be applied to other SRCOs to generate other multifunction filter structures.
文摘A chaos control strategy for chaotic current-mode boost converter is presented by using inductor current sampled feedback control technique.The quantitative analysis of control mechanism is performed by establishing a discrete alterative map of the controlled system.The stability criterion,feedback gain,and corresponding critical duty ratio are obtained from the eigenvalue of the map.The simulation results verify the t heoretical analysis results of the control strategy.
文摘In this paper a novel log-domain current-mode integrator based on MOS transistors in subthreshold is proposed. The integrator's time-constant is tunable by varying a reference bias current. By use of the integrator, a fifth-order Chebyshev lowpass filter with 0.1dB ripples is designed. The simulation results demonstrate that the proposed filter has such advantages as low power supply(1.5V), very low power dissipation (μW level), nearly ideal frequency response, very small sensitivity to components in passband, and adjustable cut-off frequency over a wide range.The circuit is composed of NMOS transistors and grounded capacitors which make it suitable for fully integrated circuit implementation.
文摘A complete state variable current-mode biquadratic filter built by duo-output CCII (DOCCII) with variable current gain is presented. All the coefficients of the filter can be independently tuned through the variable current gain factors of the DOCCII. Based on the principles upon which the general biquadratic filter was constructed, a universal electronically tunable current-mode filter is proposed which implements the low-pass, high-pass, band-pass, band-suppress and all-pass second order transfer functions simultaneously. The PSPICE simulations of frequency responses of second-order filter of are also given.
文摘Five new electronically-controllable second order current-mode sinusoidal oscillators using three mul-ti-output operational transconductance amplifiers (MO-OTAs) and two grounded capacitors (GC) have been presented. Simulation results are included to confirm the theoretical analysis based upon CMOS OTAs implementable in 0.5 μm technology.
基金the Natural Science Foundation of Shaanxi Province (2017JM6087)。
文摘In this work, an original Sallen-Key second-order low-pass filter is first turned into a current-mode one by means of the adjoint network theorem. Two nodal admittance matrices(NAM) of the filter are then educed. Furthermore, these two matrices are expanded through NAM expansion approach, generating one current-mode Sallen-Key filter, which uses two compact voltage differential trans-conductance amplifiers(VDTAs) and two grounded capacitors, implements not only one low-pass transfer function but two band-pass transfer functions, and provides the non-interrelated control between the natural frequency and quality factor. As an example of the synthesized filter, a second-order VDTA filter with fo=1 MHz, Q=1, HLP=-HBP1=HBP2=1 is designed. The used synthesis approach has been confirmed with the help of circuit and computer analysis.
