The Qiongdongnan Basin and Zhujiang River（Pearl River） Mouth Basin, important petroliferous basins in the northern South China Sea, contain abundant oil and gas resource. In this study, on basis of discussing impact...The Qiongdongnan Basin and Zhujiang River（Pearl River） Mouth Basin, important petroliferous basins in the northern South China Sea, contain abundant oil and gas resource. In this study, on basis of discussing impact of oil-base mud on TOC content and Rock-Eval parameters of cutting shale samples, the authors did comprehensive analysis of source rock quality, thermal evolution and control effect of source rock in gas accumulation of the Qiongdongnan and the Zhujiang River Mouth Basins. The contrast analysis of TOC contents and Rock-Eval parameters before and after extraction for cutting shale samples indicates that except for a weaker impact on Rock-Eval parameter S2, oil-base mud has certain impact on Rock-Eval S1, Tmax and TOC contents. When concerning oil-base mud influence on source rock geochemistry parameters, the shales in the Yacheng/Enping,Lingshui/Zhuhai and Sanya/Zhuhai Formations have mainly Type Ⅱ and Ⅲ organic matter with better gas potential and oil potential. The thermal evolution analysis suggests that the depth interval of the oil window is between 3 000 m and 5 000 m. Source rocks in the deepwater area have generated abundant gas mainly due to the late stage of the oil window and the high-supper mature stage. Gas reservoir formation condition analysis made clear that the source rock is the primary factor and fault is a necessary condition for gas accumulation. Spatial coupling of source, fault and reservoir is essential for gas accumulation and the inside of hydrocarbon-generating sag is future potential gas exploration area.展开更多
During conventional logging operations, there is always some damage to nearby stands. This study therefore assessed the damage caused after logging operations to surrounding stands in a Forest Management Unit (FMU) in...During conventional logging operations, there is always some damage to nearby stands. This study therefore assessed the damage caused after logging operations to surrounding stands in a Forest Management Unit (FMU) in south western Cameroon after logging operations. The damages assessed were snapped branches/trunks and uprooted trees. A total of 304 trees with a diameter ≥ 30 cm were cut and a total of 770 neighbouring harvestable and future trees were affected. It was observed that 375 of the neighbouring stand had their trunks snapped, 312 had their branches snapped, and 15 were uprooted. It was noted that 80% of the trees affected were those with diameters between 30 - 50 cm, which were called future trees for the next harvest, while the least damage was on protected/seed trees. Lophira alata caused the highest stand damage due to its abundance and large size, while Distemonanthus benthamianus caused the least domino damage. Damage to future trees negatively affects future concession holders as these trees are supposed to mature before the next harvest, hence the yield will be greatly reduced. Sustainable timber exploitation will greatly reduce residual damage as care will be taken to ensure falling timber causes less damage to the surrounding stand.展开更多
Drill machines used in surface mines, particularly in coal, is characterized by a very poor utilization （around 40%） and low availability （around 60%）. The main purpose of this study is to develop a drill selec- t...Drill machines used in surface mines, particularly in coal, is characterized by a very poor utilization （around 40%） and low availability （around 60%）. The main purpose of this study is to develop a drill selec- tion methodology and simultaneously a performance evaluation technique based on drill cuttings produced and drilling rate achieved. In all 28 blast drilled through were investigated. The drilling was accomplished by 5 different drill machines of Ingersoll-Rand and Revathi working in coal mines of Sonepur Bazari （SECL） and Block-II （BCCL）. The drills are Rotary and Rotary Percussive type using tri- cone rock roller bits. Drill cuttings were collected and sieve analysis was done in the laboratory. Using Rosin Ramler Diagram, coarseness index （CI）, mean chip size （d）, specific-st trace area （SSA） and charac- teristic particle size distribution curves for all the holes drilled were plotted. The predictor equation for drill penetration rate established through multiple regressions was found to have a very good correlation with an index of determination of 0.85. A comparative analysis of particle size distribution curves was used to evaluate the drill efficiency. The suggested approach utilises the area under the curve, after the point of trend reversal and brittleness ratio of the respective bench to arrive at drill energy utilization index （DEUI）, for mapping of drill machine to bench, The developed DEU1 can aid in selecting or mapping a right machine to right bench for achieving higher penetration rate and utilizations.展开更多
基金The National Key Science and Technology Special Project(13th Five Year Plan)of the Key Technology of Gas and Oil Exploration in Offshore Deep Water Area(Phase 3)under contract No.2016Zx05026
文摘The Qiongdongnan Basin and Zhujiang River（Pearl River） Mouth Basin, important petroliferous basins in the northern South China Sea, contain abundant oil and gas resource. In this study, on basis of discussing impact of oil-base mud on TOC content and Rock-Eval parameters of cutting shale samples, the authors did comprehensive analysis of source rock quality, thermal evolution and control effect of source rock in gas accumulation of the Qiongdongnan and the Zhujiang River Mouth Basins. The contrast analysis of TOC contents and Rock-Eval parameters before and after extraction for cutting shale samples indicates that except for a weaker impact on Rock-Eval parameter S2, oil-base mud has certain impact on Rock-Eval S1, Tmax and TOC contents. When concerning oil-base mud influence on source rock geochemistry parameters, the shales in the Yacheng/Enping,Lingshui/Zhuhai and Sanya/Zhuhai Formations have mainly Type Ⅱ and Ⅲ organic matter with better gas potential and oil potential. The thermal evolution analysis suggests that the depth interval of the oil window is between 3 000 m and 5 000 m. Source rocks in the deepwater area have generated abundant gas mainly due to the late stage of the oil window and the high-supper mature stage. Gas reservoir formation condition analysis made clear that the source rock is the primary factor and fault is a necessary condition for gas accumulation. Spatial coupling of source, fault and reservoir is essential for gas accumulation and the inside of hydrocarbon-generating sag is future potential gas exploration area.
文摘During conventional logging operations, there is always some damage to nearby stands. This study therefore assessed the damage caused after logging operations to surrounding stands in a Forest Management Unit (FMU) in south western Cameroon after logging operations. The damages assessed were snapped branches/trunks and uprooted trees. A total of 304 trees with a diameter ≥ 30 cm were cut and a total of 770 neighbouring harvestable and future trees were affected. It was observed that 375 of the neighbouring stand had their trunks snapped, 312 had their branches snapped, and 15 were uprooted. It was noted that 80% of the trees affected were those with diameters between 30 - 50 cm, which were called future trees for the next harvest, while the least damage was on protected/seed trees. Lophira alata caused the highest stand damage due to its abundance and large size, while Distemonanthus benthamianus caused the least domino damage. Damage to future trees negatively affects future concession holders as these trees are supposed to mature before the next harvest, hence the yield will be greatly reduced. Sustainable timber exploitation will greatly reduce residual damage as care will be taken to ensure falling timber causes less damage to the surrounding stand.
文摘Drill machines used in surface mines, particularly in coal, is characterized by a very poor utilization （around 40%） and low availability （around 60%）. The main purpose of this study is to develop a drill selec- tion methodology and simultaneously a performance evaluation technique based on drill cuttings produced and drilling rate achieved. In all 28 blast drilled through were investigated. The drilling was accomplished by 5 different drill machines of Ingersoll-Rand and Revathi working in coal mines of Sonepur Bazari （SECL） and Block-II （BCCL）. The drills are Rotary and Rotary Percussive type using tri- cone rock roller bits. Drill cuttings were collected and sieve analysis was done in the laboratory. Using Rosin Ramler Diagram, coarseness index （CI）, mean chip size （d）, specific-st trace area （SSA） and charac- teristic particle size distribution curves for all the holes drilled were plotted. The predictor equation for drill penetration rate established through multiple regressions was found to have a very good correlation with an index of determination of 0.85. A comparative analysis of particle size distribution curves was used to evaluate the drill efficiency. The suggested approach utilises the area under the curve, after the point of trend reversal and brittleness ratio of the respective bench to arrive at drill energy utilization index （DEUI）, for mapping of drill machine to bench, The developed DEU1 can aid in selecting or mapping a right machine to right bench for achieving higher penetration rate and utilizations.
