The Chang＇e-3 （CE-3） mission is China＇s first exploration mission on the surface of the Moon that uses a lander and a rover. Eight instruments that form the scientific payloads have the following objectives： （1...The Chang＇e-3 （CE-3） mission is China＇s first exploration mission on the surface of the Moon that uses a lander and a rover. Eight instruments that form the scientific payloads have the following objectives： （1） investigate the morphological features and geological structures at the landing site; （2） integrated in-situ analysis of minerals and chemical compositions; （3） integrated exploration of the structure of the lunar interior; （4） exploration of the lunar-terrestrial space environment, lunar sur- face environment and acquire Moon-based ultraviolet astronomical observations. The Ground Research and Application System （GRAS） is in charge of data acquisition and pre-processing, management of the payload in orbit, and managing the data products and their applications. The Data Pre-processing Subsystem （DPS） is a part of GRAS. The task of DPS is the pre-processing of raw data from the eight instruments that are part of CE-3, including channel processing, unpacking, package sorting, calibration and correction, identification of geographical location, calculation of probe azimuth angle, probe zenith angle, solar azimuth angle, and solar zenith angle and so on, and conducting quality checks. These processes produce Level 0, Level 1 and Level 2 data. The computing platform of this subsystem is comprised of a high-performance computing cluster, including a real-time subsystem used for processing Level 0 data and a post-time subsystem for generating Level 1 and Level 2 data. This paper de- scribes the CE-3 data pre-processing method, the data pre-processing subsystem, data classification, data validity and data products that are used for scientific studies.展开更多
In order to overcome the defects that the analysis of multi-well typical curves of shale gas reservoirs is rarely applied to engineering,this study proposes a robust production data analysis method based on deconvolut...In order to overcome the defects that the analysis of multi-well typical curves of shale gas reservoirs is rarely applied to engineering,this study proposes a robust production data analysis method based on deconvolution,which is used for multi-well inter-well interference research.In this study,a multi-well conceptual trilinear seepage model for multi-stage fractured horizontal wells was established,and its Laplace solutions under two different outer boundary conditions were obtained.Then,an improved pressure deconvolution algorithm was used to normalize the scattered production data.Furthermore,the typical curve fitting was carried out using the production data and the seepage model solution.Finally,some reservoir parameters and fracturing parameters were interpreted,and the intensity of inter-well interference was compared.The effectiveness of the method was verified by analyzing the production dynamic data of six shale gas wells in Duvernay area.The results showed that the fitting effect of typical curves was greatly improved due to the mutual restriction between deconvolution calculation parameter debugging and seepage model parameter debugging.Besides,by using the morphological characteristics of the log-log typical curves and the time corresponding to the intersection point of the log-log typical curves of two models under different outer boundary conditions,the strength of the interference between wells on the same well platform was well judged.This work can provide a reference for the optimization of well spacing and hydraulic fracturing measures for shale gas wells.展开更多
A simple data assimilation method for improving estimation of moderate resolution imaging spectroradiometer （MODIS） leaf area index （LAI） time-series data products based on the gradient inverse weighted filter and...A simple data assimilation method for improving estimation of moderate resolution imaging spectroradiometer （MODIS） leaf area index （LAI） time-series data products based on the gradient inverse weighted filter and object analysis is proposed. The properties and quality control （QC） of MODIS LAI data products are introduced. Also, the gradient inverse weighted filter and object analysis are analyzed. An experiment based on the simple data assimilation method is performed using MODIS LAI data sets from 2000 to 2005 of Guizhou Province in China.展开更多
Ocean salinity is an important variable that affects the ocean stratification.We compared the salinity and ocean stratification in the tropical Pacific derived from the Argo(Array for Real-time Geostrophic Oceanograph...Ocean salinity is an important variable that affects the ocean stratification.We compared the salinity and ocean stratification in the tropical Pacific derived from the Argo(Array for Real-time Geostrophic Oceanography data),EN4(Ensemble 4 analysis),SODA(the Simple Ocean Data Assimilation reanalysis),IAP(Institute of Atmospheric Physics data),and ORAS4(Ocean Reanalysis System 4)over 2005–2017.Results show that the spatial distribution of climatological mean of sea surface salinity(SSS)in all the products is consistent,and the low salinity region showed large deviation and strong dispersion.The Argo has the smallest RMSE and the highest correlation with the ensemble mean,while the IAP shows a high-salinity deviations relative to other datasets.All the products show high positive correlations between the sea surface density(SSD)and SSS with respect to the deviations of climatological mean from ensemble mean,suggesting that the SSD deviation may be mainly influenced by the SSS deviation.In the aspect of the ocean stratification,the mixed layer depth(MLD)climatological mean in the Argo shows the highest correlation with the ensemble mean,followed by EN4,IAP,ORAS4,and SODA.The Argo and EN4 show thicker barrier layer(BL)relative to the ensemble mean while the SODA displays the largest negative deviation in the tropical western Pacific.Furthermore,the EN4,ORAS4,and IAP underestimate the stability in the upper ocean at the depths of 20–140 m,while Argo overestimates ocean stability.The salinity fronts in the western-central equatorial Pacific from Argo,EN4,and ORAS4 are consistent,while those from SODA and IAP show large deviations with a westward position in amplitude of 0°–6°and 0°–10°,respectively.The SSS trend patterns from all the products are consistent in having ensemble mean with high spatial correlations of 0.95–0.97.展开更多
Deep coalbed methane(DCBM),an unconventional gas reservoir,has undergone significant advancements in recent years,sparking a growing interest in assessing pore pressure dynamics within these reservoirs.While some prod...Deep coalbed methane(DCBM),an unconventional gas reservoir,has undergone significant advancements in recent years,sparking a growing interest in assessing pore pressure dynamics within these reservoirs.While some production data analysis techniques have been adapted from conventional oil and gas wells,there remains a gap in the understanding of pore pressure generation and evolution,particularly in wells subjected to large-scale hydraulic fracturing.To address this gap,a novel technique called excess pore pressure analysis(EPPA)has been introduced to the coal seam gas industry for the first time to our knowledge,which employs dual-phase flow principles based on consolidation theory.This technique focuses on the generation and dissipation for excess pore-water pressure(EPWP)and excess pore-gas pressure(EPGP)in stimulated deep coal reservoirs.Equations have been developed respectively and numerical solutions have been provided using the finite element method(FEM).Application of this model to a representative field example reveals that excess pore pressure arises from rapid loading,with overburden weight transferred under undrained condition due to intense hydraulic fracturing,which significantly redistributes the weight-bearing role from the solid coal structure to the injected fluid and liberated gas within artificial pores over a brief timespan.Furthermore,field application indicates that the dissipation of EPWP and EPGP can be actually considered as the process of well production,where methane and water are extracted from deep coalbed methane wells,leading to consolidation for the artificial reservoirs.Moreover,history matching results demonstrate that the excess-pressure model established in this study provides a better explanation for the declining trends observed in both gas and water production curves,compared to conventional practices in coalbed methane reservoir engineering and petroleum engineering.This research not only enhances the understanding of DCBM reservoir behavior but also offers insights applicable to production analysis in other unconventional resources reliant on hydraulic fracturing.展开更多
On the basis of PDM(product data management) definition and its connotation, the factors to ensure implementation success are analyzed. The definition phase, analysis phase, design phase, build and test phase, and pos...On the basis of PDM(product data management) definition and its connotation, the factors to ensure implementation success are analyzed. The definition phase, analysis phase, design phase, build and test phase, and post production phase during PDM implementation are described. The implementation is divided into ten processes, which consist of the above different phases. The relationships between phases and processes are illustrated. Finally, a workflow is proposed to guide the implementing at a fixed price.展开更多
In this paper we present the MEMPHIS middleware framework for the integration of CAD geometries and assemblies with derived Virtual Reality (VR) models and its specific meta data and attributes. The goal of this work ...In this paper we present the MEMPHIS middleware framework for the integration of CAD geometries and assemblies with derived Virtual Reality (VR) models and its specific meta data and attributes. The goal of this work is to connect real time VR applications, especially for the Design Review, with enterprise software storing and managing CAD models (Product Data Man- agement—PDM). The preparation of VR models requires expert knowledge, is time consuming, and includes selection of required CAD data, tessellation, healing of unwanted gaps, applying materials and textures, and special surface and light effects. During the Design Review process, decisions are made concerning the choice of materials and surface forms. While materials can be switched directly on the VR model, the modification of part geometries must be made on the CAD model. Our system synchronizes modi- fications of the original CAD geometries and of attributes that are relevant for the realistic rendering using the PLM Services standard. Thus, repeated work for the VR preparation can be avoided.展开更多
The basic frame and the design idea of J2EE-based Product Data Management (PDM) system are presented. This paper adopts the technology of Object-Oriented to realize the database design and builds the information model...The basic frame and the design idea of J2EE-based Product Data Management (PDM) system are presented. This paper adopts the technology of Object-Oriented to realize the database design and builds the information model of this PDM system. The integration key technology of PDM and CAD systems are discussed, the isomerous interface characteristics between CAD and PDM systems are analyzed, and finally, the integration mode of the PDM and CAD systems is given. Using these technologies, the integration of PDM and CAD systems is realized and the consistence of data in PDM and CAD systems is kept. Finally, the Product Data Management system is developed, which has been tested on development process of the hydraulic generator. The running process is stable and safety.展开更多
A data-space inversion(DSI)method has been recently proposed and successfully applied to the history matching and production prediction of reservoirs.Based on Bayesian theory,DSI can directly and effectively obtain go...A data-space inversion(DSI)method has been recently proposed and successfully applied to the history matching and production prediction of reservoirs.Based on Bayesian theory,DSI can directly and effectively obtain good posterior flow predictions without inversion of geological parameters of reservoir model.This paper presents an improved DSI method to fast predict reservoir state fields(e.g.saturation and pressure profiles)via observed production data.Firstly,a large number of production curves and state data are generated by reservoir model simulation to expand the data space of original DSI.Then,efficient history matching only on the observed production data is carried out via the original DSI to obtain related parameters which reflects the weight of the real reservoir model relative to prior reservoir models.Finally,those parameters are used to predict the oil saturation and pressure profiles of the real reservoir model by combining large amounts of state data of prior reservoir models.Two examples including conventional heterogeneous and unconventional fractured reservoir are implemented to test the performances of predicting saturation and pressure profiles of this improved DSI method.Besides,this method is also tested in a real field and the obtained results show the high computational efficiency and high accuracy of the practical application of this method.展开更多
This paper presents the development and application of a production data analysis software that can analyze and forecast the production performance and reservoir properties of shale gas wells.The theories used in the ...This paper presents the development and application of a production data analysis software that can analyze and forecast the production performance and reservoir properties of shale gas wells.The theories used in the study were based on the analytical and empirical approaches.Its reliability has been confirmed through comparisons with a commercial software.Using transient data relating to multi-stage hydraulic fractured horizontal wells,it was confirmed that the accuracy of the modified hyperbolic method showed an error of approximately 4%compared to the actual estimated ultimate recovery(EUR).On the basis of the developed model,reliable productivity forecasts have been obtained by analyzing field production data relating to wells in Canada.The EUR was computed as 9.6 Bcf using the modified hyperbolic method.Employing the Pow Law Exponential method,the EUR would be 9.4 Bcf.The models developed in this study will allow in the future integration of new analytical and empirical theories in a relatively readily than commercial models.展开更多
In the course of network supported collaborative design, the data processing plays a very vital role. Much effort has been spent in this area, and many kinds of approaches have been proposed. Based on the correlative ...In the course of network supported collaborative design, the data processing plays a very vital role. Much effort has been spent in this area, and many kinds of approaches have been proposed. Based on the correlative materials, this paper presents extensible markup language （XML） based strategy for several important problems of data processing in network supported collaborative design, such as the representation of standard for the exchange of product model data （STEP） with XML in the product information expression and the management of XML documents using relational database. The paper gives a detailed exposition on how to clarify the mapping between XML structure and the relationship database structure and how XML-QL queries can be translated into structured query language （SQL） queries. Finally, the structure of data processing system based on XML is presented.展开更多
Product data management (PDM) has been accepted as an important tool for the manufacturing industries. In recent years, more and mor e researches have been conducted in the development of PDM. Their research area s in...Product data management (PDM) has been accepted as an important tool for the manufacturing industries. In recent years, more and mor e researches have been conducted in the development of PDM. Their research area s include system design, integration of object-oriented technology, data distri bution, collaborative and distributed manufacturing working environment, secur ity, and web-based integration. However, there are limitations on their rese arches. In particular, they cannot cater for PDM in distributed manufacturing e nvironment. This is especially true in South China, where many Hong Kong (HK) ma nufacturers have moved their production plants to different locations in Pearl R iver Delta for cost reduction. However, they retain their main offices in HK. Development of PDM system is inherently complex. Product related data cover prod uct name, product part number (product identification), drawings, material speci fications, dimension requirement, quality specification, test result, log size, production schedules, product data version and date of release, special tooling (e.g. jig and fixture), mould design, project engineering in charge, cost spread sheets, while process data includes engineering release, engineering change info rmation management, and other workflow related to the process information. Accor ding to Cornelissen et al., the contemporary PDM system should contains manageme nt functions in structure, retrieval, release, change, and workflow. In system design, development and implementation, a formal specification is nece ssary. However, there is no formal representation model for PDM system. Theref ore a graphical representation model is constructed to express the various scena rios of interactions between users and the PDM system. Statechart is then used to model the operations of PDM system, Fig.1. Statechart model bridges the curr ent gap between requirements, scenarios, and the initial design specifications o f PDM system. After properly analyzing the PDM system, a new distributed PDM (DPDM) system is proposed. Both graphical representation and statechart models are constructed f or the new DPDM system, Fig.2. New product data of DPDM and new system function s are then investigated to support product information flow in the new distribut ed environment. It is found that statecharts allow formal representations to capture the informa tion and control flows of both PDM and DPDM. In particular, statechart offers a dditional expressive power, when compared to conventional state transition diagr am, in terms of hierarchy, concurrency, history, and timing for DPDM behavioral modeling.展开更多
PDM (product data management) is one kind of techniques based on software and database, which integrates information and process related to products. But it is not enough to perform the complication of PDM in enterpri...PDM (product data management) is one kind of techniques based on software and database, which integrates information and process related to products. But it is not enough to perform the complication of PDM in enterprises. Then the mechanism to harmonize all kinds of information and process is needed. The paper introduces a novel approach to implement the intelligent monitor of PDM based on MAS (multi agent system). It carries out the management of information and process by MC (monitor center). The paper first puts forward the architecture of the whole system, then defines the structure of MC and its interoperation mode.展开更多
This paper is concerned with the development of product data management （PDM） systems--WPDM systems based on web technologies. As a tool to integrate information, traditional PDM system has many benefits for the com...This paper is concerned with the development of product data management （PDM） systems--WPDM systems based on web technologies. As a tool to integrate information, traditional PDM system has many benefits for the companies in such aspects as improving design productivity, better control over projects and so on. With the maturing of web technologies, the advantages of WPDM system are obvious. We will show these advantages in detail in Part 3. WPDM system is built on three-tier application model to provide security and flexibility, they are back-end, middle layer and front-end. The basic designs in each layer will be briefly introduced in Part 4. In the future, WPDM will be extended to integrate with other applications to provide a complete web-based engineering environment.展开更多
A new web product data management architecture is presented. The three-tier web architecture and Simple Object Access Protocol (SOAP) are combined to build the web-based product data management (PDM) system which incl...A new web product data management architecture is presented. The three-tier web architecture and Simple Object Access Protocol (SOAP) are combined to build the web-based product data management (PDM) system which includes three tiers: the user services tier, the business services tier, and the data services tier. The client service component uses the server-side technology, and Extensible Markup Language (XML) web service which uses SOAP as the communication protocol is chosen as the business service component. To illustrate how to build a web-based PDM system using the proposed architecture, a case PDM system which included three logical tires was built. To use the security and central management features of the database, a stored procedure was recommended in the data services tier. The business object was implemented as an XML web service so that client could use standard internet protocols to communicate with the business object from any platform. In order to satisfy users using all sorts of browser, the server-side technology and Microsoft ASP.NET was used to create the dynamic user interface.展开更多
Before the implementation of product data management (PDM) system, person model and enterprise process model (EPM) must be firstly established. For the convenience of project management, all the related users must be ...Before the implementation of product data management (PDM) system, person model and enterprise process model (EPM) must be firstly established. For the convenience of project management, all the related users must be allocated to the “Person User Role Group” net. Based on the person model and the direction of information flow, the EPM is established subsequently. The EPM consists of several release levels, in which the access controls are defined. The EPM procedure shows the blueprint of the workflow process structure. The establishment of person model and EPM in an enterprise has been instanced at the end of this paper.展开更多
The continuous developing features in the design of mechanical product and based on 3D entity model is aimed at, and the extension of the 4-dimensional model with the process of designing, the knowledge described mode...The continuous developing features in the design of mechanical product and based on 3D entity model is aimed at, and the extension of the 4-dimensional model with the process of designing, the knowledge described model on the level of semantic understanding and summarizing the designing process and the way of discovering knowledge from multi-information model are studied. On the basis of designing the broad sensed collaborative system, through discussion of the relationship between the implicit knowledge of the users and the designing knowledge as well as commanding all the designing links, taking advantage of the way of concluding and deducting in the concept of the designers, the synthetic knowledge unit formed in the dynamic process from the conception design t9 the last design is schemed out, and the knowledge discovered principle in the dynamic designing process of the mechanical products and the key technology in its implementation under the milieu of network is brought forward.展开更多
introduced are the main implementation contents and brought out is a cycle optimal PDMimplementation methodology by phases through studying requirements of enterprises' datamanagement and summarizing the existing ...introduced are the main implementation contents and brought out is a cycle optimal PDMimplementation methodology by phases through studying requirements of enterprises' datamanagement and summarizing the existing method. The implementation contents include documentsmanagement product structure and configuration management, product classification and codingmanagement, workflow management and software encapsulation. It divides the PDM implementationinto preparing, software selechon and training, implementation plan making, concrete implementingand evaluating. By the cycle of the last two pheses, the successful implementation of PDM can beobtained. This methodology has been used in the CIMS project of two companies and proved to bepractical.展开更多
文摘The Chang＇e-3 （CE-3） mission is China＇s first exploration mission on the surface of the Moon that uses a lander and a rover. Eight instruments that form the scientific payloads have the following objectives： （1） investigate the morphological features and geological structures at the landing site; （2） integrated in-situ analysis of minerals and chemical compositions; （3） integrated exploration of the structure of the lunar interior; （4） exploration of the lunar-terrestrial space environment, lunar sur- face environment and acquire Moon-based ultraviolet astronomical observations. The Ground Research and Application System （GRAS） is in charge of data acquisition and pre-processing, management of the payload in orbit, and managing the data products and their applications. The Data Pre-processing Subsystem （DPS） is a part of GRAS. The task of DPS is the pre-processing of raw data from the eight instruments that are part of CE-3, including channel processing, unpacking, package sorting, calibration and correction, identification of geographical location, calculation of probe azimuth angle, probe zenith angle, solar azimuth angle, and solar zenith angle and so on, and conducting quality checks. These processes produce Level 0, Level 1 and Level 2 data. The computing platform of this subsystem is comprised of a high-performance computing cluster, including a real-time subsystem used for processing Level 0 data and a post-time subsystem for generating Level 1 and Level 2 data. This paper de- scribes the CE-3 data pre-processing method, the data pre-processing subsystem, data classification, data validity and data products that are used for scientific studies.
基金financial support from PetroChina Innovation Foundation。
文摘In order to overcome the defects that the analysis of multi-well typical curves of shale gas reservoirs is rarely applied to engineering,this study proposes a robust production data analysis method based on deconvolution,which is used for multi-well inter-well interference research.In this study,a multi-well conceptual trilinear seepage model for multi-stage fractured horizontal wells was established,and its Laplace solutions under two different outer boundary conditions were obtained.Then,an improved pressure deconvolution algorithm was used to normalize the scattered production data.Furthermore,the typical curve fitting was carried out using the production data and the seepage model solution.Finally,some reservoir parameters and fracturing parameters were interpreted,and the intensity of inter-well interference was compared.The effectiveness of the method was verified by analyzing the production dynamic data of six shale gas wells in Duvernay area.The results showed that the fitting effect of typical curves was greatly improved due to the mutual restriction between deconvolution calculation parameter debugging and seepage model parameter debugging.Besides,by using the morphological characteristics of the log-log typical curves and the time corresponding to the intersection point of the log-log typical curves of two models under different outer boundary conditions,the strength of the interference between wells on the same well platform was well judged.This work can provide a reference for the optimization of well spacing and hydraulic fracturing measures for shale gas wells.
基金This work was supported by the China Postdoctoral Science Foundation(No.20060390326)the key international S&T cooperation project of China(No.2004DFA06300).
文摘A simple data assimilation method for improving estimation of moderate resolution imaging spectroradiometer （MODIS） leaf area index （LAI） time-series data products based on the gradient inverse weighted filter and object analysis is proposed. The properties and quality control （QC） of MODIS LAI data products are introduced. Also, the gradient inverse weighted filter and object analysis are analyzed. An experiment based on the simple data assimilation method is performed using MODIS LAI data sets from 2000 to 2005 of Guizhou Province in China.
基金Supported by the National Key Research and Development Program on MonitoringEarly Warning and Prevention of Major Natural Disaster (No.2019YFC1510004)the Laoshan Laboratory (No.LSKJ202202403)。
文摘Ocean salinity is an important variable that affects the ocean stratification.We compared the salinity and ocean stratification in the tropical Pacific derived from the Argo(Array for Real-time Geostrophic Oceanography data),EN4(Ensemble 4 analysis),SODA(the Simple Ocean Data Assimilation reanalysis),IAP(Institute of Atmospheric Physics data),and ORAS4(Ocean Reanalysis System 4)over 2005–2017.Results show that the spatial distribution of climatological mean of sea surface salinity(SSS)in all the products is consistent,and the low salinity region showed large deviation and strong dispersion.The Argo has the smallest RMSE and the highest correlation with the ensemble mean,while the IAP shows a high-salinity deviations relative to other datasets.All the products show high positive correlations between the sea surface density(SSD)and SSS with respect to the deviations of climatological mean from ensemble mean,suggesting that the SSD deviation may be mainly influenced by the SSS deviation.In the aspect of the ocean stratification,the mixed layer depth(MLD)climatological mean in the Argo shows the highest correlation with the ensemble mean,followed by EN4,IAP,ORAS4,and SODA.The Argo and EN4 show thicker barrier layer(BL)relative to the ensemble mean while the SODA displays the largest negative deviation in the tropical western Pacific.Furthermore,the EN4,ORAS4,and IAP underestimate the stability in the upper ocean at the depths of 20–140 m,while Argo overestimates ocean stability.The salinity fronts in the western-central equatorial Pacific from Argo,EN4,and ORAS4 are consistent,while those from SODA and IAP show large deviations with a westward position in amplitude of 0°–6°and 0°–10°,respectively.The SSS trend patterns from all the products are consistent in having ensemble mean with high spatial correlations of 0.95–0.97.
基金supported by the National Natural Science Foundation of China(Nos.42272195 and 42130802)supported by the Key Applied Science and Technology Project of PetroChina(No.2023ZZ18)the Major Science and Technology Project of Changqing Oilfield(No.2023DZZ01).
文摘Deep coalbed methane(DCBM),an unconventional gas reservoir,has undergone significant advancements in recent years,sparking a growing interest in assessing pore pressure dynamics within these reservoirs.While some production data analysis techniques have been adapted from conventional oil and gas wells,there remains a gap in the understanding of pore pressure generation and evolution,particularly in wells subjected to large-scale hydraulic fracturing.To address this gap,a novel technique called excess pore pressure analysis(EPPA)has been introduced to the coal seam gas industry for the first time to our knowledge,which employs dual-phase flow principles based on consolidation theory.This technique focuses on the generation and dissipation for excess pore-water pressure(EPWP)and excess pore-gas pressure(EPGP)in stimulated deep coal reservoirs.Equations have been developed respectively and numerical solutions have been provided using the finite element method(FEM).Application of this model to a representative field example reveals that excess pore pressure arises from rapid loading,with overburden weight transferred under undrained condition due to intense hydraulic fracturing,which significantly redistributes the weight-bearing role from the solid coal structure to the injected fluid and liberated gas within artificial pores over a brief timespan.Furthermore,field application indicates that the dissipation of EPWP and EPGP can be actually considered as the process of well production,where methane and water are extracted from deep coalbed methane wells,leading to consolidation for the artificial reservoirs.Moreover,history matching results demonstrate that the excess-pressure model established in this study provides a better explanation for the declining trends observed in both gas and water production curves,compared to conventional practices in coalbed methane reservoir engineering and petroleum engineering.This research not only enhances the understanding of DCBM reservoir behavior but also offers insights applicable to production analysis in other unconventional resources reliant on hydraulic fracturing.
文摘On the basis of PDM(product data management) definition and its connotation, the factors to ensure implementation success are analyzed. The definition phase, analysis phase, design phase, build and test phase, and post production phase during PDM implementation are described. The implementation is divided into ten processes, which consist of the above different phases. The relationships between phases and processes are illustrated. Finally, a workflow is proposed to guide the implementing at a fixed price.
基金Project supported by the Korean Ministry of Information and Communication (MIC)
文摘In this paper we present the MEMPHIS middleware framework for the integration of CAD geometries and assemblies with derived Virtual Reality (VR) models and its specific meta data and attributes. The goal of this work is to connect real time VR applications, especially for the Design Review, with enterprise software storing and managing CAD models (Product Data Man- agement—PDM). The preparation of VR models requires expert knowledge, is time consuming, and includes selection of required CAD data, tessellation, healing of unwanted gaps, applying materials and textures, and special surface and light effects. During the Design Review process, decisions are made concerning the choice of materials and surface forms. While materials can be switched directly on the VR model, the modification of part geometries must be made on the CAD model. Our system synchronizes modi- fications of the original CAD geometries and of attributes that are relevant for the realistic rendering using the PLM Services standard. Thus, repeated work for the VR preparation can be avoided.
基金Sponsored by Scientific Technology Development Project of Heilongjiang (Grant No.WH05A01) and Scientific Research Foundation of Harbin Institute of Technology(Grant No.HIT.MD2003.21).
文摘The basic frame and the design idea of J2EE-based Product Data Management (PDM) system are presented. This paper adopts the technology of Object-Oriented to realize the database design and builds the information model of this PDM system. The integration key technology of PDM and CAD systems are discussed, the isomerous interface characteristics between CAD and PDM systems are analyzed, and finally, the integration mode of the PDM and CAD systems is given. Using these technologies, the integration of PDM and CAD systems is realized and the consistence of data in PDM and CAD systems is kept. Finally, the Product Data Management system is developed, which has been tested on development process of the hydraulic generator. The running process is stable and safety.
基金supported by Southern Marine Science and Engineering Guangdong Laboratory(Zhanjiang)(No.ZJW-2019-04)Cooperative Innovation Center of Unconventional Oil and Gas(Ministry of Education&Hubei Province),Yangtze University(No.UOG2020-17)the National Natural Science Foundation of China(No.51874044,51922007)。
文摘A data-space inversion(DSI)method has been recently proposed and successfully applied to the history matching and production prediction of reservoirs.Based on Bayesian theory,DSI can directly and effectively obtain good posterior flow predictions without inversion of geological parameters of reservoir model.This paper presents an improved DSI method to fast predict reservoir state fields(e.g.saturation and pressure profiles)via observed production data.Firstly,a large number of production curves and state data are generated by reservoir model simulation to expand the data space of original DSI.Then,efficient history matching only on the observed production data is carried out via the original DSI to obtain related parameters which reflects the weight of the real reservoir model relative to prior reservoir models.Finally,those parameters are used to predict the oil saturation and pressure profiles of the real reservoir model by combining large amounts of state data of prior reservoir models.Two examples including conventional heterogeneous and unconventional fractured reservoir are implemented to test the performances of predicting saturation and pressure profiles of this improved DSI method.Besides,this method is also tested in a real field and the obtained results show the high computational efficiency and high accuracy of the practical application of this method.
基金supported by the Energy Efficiency&Resources Core Technology Program of the Korea Institute of Energy Technology Evaluation and Planning(KETEP)granted financial resource from the Ministry of Trade,Industry&Energy,Republic of Korea(No.20172510102090).
文摘This paper presents the development and application of a production data analysis software that can analyze and forecast the production performance and reservoir properties of shale gas wells.The theories used in the study were based on the analytical and empirical approaches.Its reliability has been confirmed through comparisons with a commercial software.Using transient data relating to multi-stage hydraulic fractured horizontal wells,it was confirmed that the accuracy of the modified hyperbolic method showed an error of approximately 4%compared to the actual estimated ultimate recovery(EUR).On the basis of the developed model,reliable productivity forecasts have been obtained by analyzing field production data relating to wells in Canada.The EUR was computed as 9.6 Bcf using the modified hyperbolic method.Employing the Pow Law Exponential method,the EUR would be 9.4 Bcf.The models developed in this study will allow in the future integration of new analytical and empirical theories in a relatively readily than commercial models.
基金supported by National High Technology Research and Development Program of China (863 Program) (No. AA420060)
文摘In the course of network supported collaborative design, the data processing plays a very vital role. Much effort has been spent in this area, and many kinds of approaches have been proposed. Based on the correlative materials, this paper presents extensible markup language （XML） based strategy for several important problems of data processing in network supported collaborative design, such as the representation of standard for the exchange of product model data （STEP） with XML in the product information expression and the management of XML documents using relational database. The paper gives a detailed exposition on how to clarify the mapping between XML structure and the relationship database structure and how XML-QL queries can be translated into structured query language （SQL） queries. Finally, the structure of data processing system based on XML is presented.
文摘Product data management (PDM) has been accepted as an important tool for the manufacturing industries. In recent years, more and mor e researches have been conducted in the development of PDM. Their research area s include system design, integration of object-oriented technology, data distri bution, collaborative and distributed manufacturing working environment, secur ity, and web-based integration. However, there are limitations on their rese arches. In particular, they cannot cater for PDM in distributed manufacturing e nvironment. This is especially true in South China, where many Hong Kong (HK) ma nufacturers have moved their production plants to different locations in Pearl R iver Delta for cost reduction. However, they retain their main offices in HK. Development of PDM system is inherently complex. Product related data cover prod uct name, product part number (product identification), drawings, material speci fications, dimension requirement, quality specification, test result, log size, production schedules, product data version and date of release, special tooling (e.g. jig and fixture), mould design, project engineering in charge, cost spread sheets, while process data includes engineering release, engineering change info rmation management, and other workflow related to the process information. Accor ding to Cornelissen et al., the contemporary PDM system should contains manageme nt functions in structure, retrieval, release, change, and workflow. In system design, development and implementation, a formal specification is nece ssary. However, there is no formal representation model for PDM system. Theref ore a graphical representation model is constructed to express the various scena rios of interactions between users and the PDM system. Statechart is then used to model the operations of PDM system, Fig.1. Statechart model bridges the curr ent gap between requirements, scenarios, and the initial design specifications o f PDM system. After properly analyzing the PDM system, a new distributed PDM (DPDM) system is proposed. Both graphical representation and statechart models are constructed f or the new DPDM system, Fig.2. New product data of DPDM and new system function s are then investigated to support product information flow in the new distribut ed environment. It is found that statecharts allow formal representations to capture the informa tion and control flows of both PDM and DPDM. In particular, statechart offers a dditional expressive power, when compared to conventional state transition diagr am, in terms of hierarchy, concurrency, history, and timing for DPDM behavioral modeling.
文摘PDM (product data management) is one kind of techniques based on software and database, which integrates information and process related to products. But it is not enough to perform the complication of PDM in enterprises. Then the mechanism to harmonize all kinds of information and process is needed. The paper introduces a novel approach to implement the intelligent monitor of PDM based on MAS (multi agent system). It carries out the management of information and process by MC (monitor center). The paper first puts forward the architecture of the whole system, then defines the structure of MC and its interoperation mode.
文摘This paper is concerned with the development of product data management （PDM） systems--WPDM systems based on web technologies. As a tool to integrate information, traditional PDM system has many benefits for the companies in such aspects as improving design productivity, better control over projects and so on. With the maturing of web technologies, the advantages of WPDM system are obvious. We will show these advantages in detail in Part 3. WPDM system is built on three-tier application model to provide security and flexibility, they are back-end, middle layer and front-end. The basic designs in each layer will be briefly introduced in Part 4. In the future, WPDM will be extended to integrate with other applications to provide a complete web-based engineering environment.
基金the National Key Project Foundation of China (No. 2001BA201A0605) and partially supported by the State Key Lab for Mechanical Transmission..
文摘A new web product data management architecture is presented. The three-tier web architecture and Simple Object Access Protocol (SOAP) are combined to build the web-based product data management (PDM) system which includes three tiers: the user services tier, the business services tier, and the data services tier. The client service component uses the server-side technology, and Extensible Markup Language (XML) web service which uses SOAP as the communication protocol is chosen as the business service component. To illustrate how to build a web-based PDM system using the proposed architecture, a case PDM system which included three logical tires was built. To use the security and central management features of the database, a stored procedure was recommended in the data services tier. The business object was implemented as an XML web service so that client could use standard internet protocols to communicate with the business object from any platform. In order to satisfy users using all sorts of browser, the server-side technology and Microsoft ASP.NET was used to create the dynamic user interface.
文摘Before the implementation of product data management (PDM) system, person model and enterprise process model (EPM) must be firstly established. For the convenience of project management, all the related users must be allocated to the “Person User Role Group” net. Based on the person model and the direction of information flow, the EPM is established subsequently. The EPM consists of several release levels, in which the access controls are defined. The EPM procedure shows the blueprint of the workflow process structure. The establishment of person model and EPM in an enterprise has been instanced at the end of this paper.
基金Selected from Proceedings of the 7th International Conference on Frontiers of DesignManufacturing(ICFDM'2006)This project is supported by National Natural Science Foundation of China(No.50275100)Key Scientific Technological Projects in Sichuan China(No.2006Z01-001-6).
文摘The continuous developing features in the design of mechanical product and based on 3D entity model is aimed at, and the extension of the 4-dimensional model with the process of designing, the knowledge described model on the level of semantic understanding and summarizing the designing process and the way of discovering knowledge from multi-information model are studied. On the basis of designing the broad sensed collaborative system, through discussion of the relationship between the implicit knowledge of the users and the designing knowledge as well as commanding all the designing links, taking advantage of the way of concluding and deducting in the concept of the designers, the synthetic knowledge unit formed in the dynamic process from the conception design t9 the last design is schemed out, and the knowledge discovered principle in the dynamic designing process of the mechanical products and the key technology in its implementation under the milieu of network is brought forward.
文摘introduced are the main implementation contents and brought out is a cycle optimal PDMimplementation methodology by phases through studying requirements of enterprises' datamanagement and summarizing the existing method. The implementation contents include documentsmanagement product structure and configuration management, product classification and codingmanagement, workflow management and software encapsulation. It divides the PDM implementationinto preparing, software selechon and training, implementation plan making, concrete implementingand evaluating. By the cycle of the last two pheses, the successful implementation of PDM can beobtained. This methodology has been used in the CIMS project of two companies and proved to bepractical.
