Layered Ni-rich transition metal oxide is treated as the most promising alternative cathode due to their high-capacity and flexible composition.However,the severe lattice strain and slow Li-ion migration kinetics seve...Layered Ni-rich transition metal oxide is treated as the most promising alternative cathode due to their high-capacity and flexible composition.However,the severe lattice strain and slow Li-ion migration kinetics severely restrict their practical application.Herein,a novelty strategy induced pinning effect and defect structure in layered Ni-rich transition metal oxide cathodes is proposed via a facile cation(iron ion)/anion(polyanion)co-doping method.Subsequently,the effects of pinning effect and defect structure on element valence state,crystal structure,morphology,lattice strain,and electrochemical performance during lithiation/delithiation are systematically explored.The detailed characterizations(soft X-ray absorption spectroscopy(sXAS),in-situ X-ray diffraction(XRD),etc.)and density functional theory(DFT)calculation demonstrate that the pinning effects built-in LiNi_(0.9)Co_(0.05)Mn_(0.05)O_(2)materials by the dual-site occupation of iron ions on lithium and transition metal sites effectively alleviate the abrupt lattice strain caused by an unfavorable phase transition and the subsequent induction of defect structures in the Li layer can greatly reduce the lithium-ion diffusion barrier.Therefore,the modified LiNi_(0.9)Co_(0.05)Mn_(0.05)O_(2)exhibits a high-capacity of 206.5 mAh g^(-1)and remarkably enhanced capacity retention of 93.9%after 100 cycles,far superior to~14.1%of the pristine cathodes.Besides,an excellent discharge capacity of 180.1 mAh g^(-1)at 10 C rate is maintained,illustrating its remarkable rate capability.This work reports a pinning effect and defect engineering method to suppress the lattice strain and alleviate lithium-ion kinetic barriers in the Ni-rich layered cathodes,providing a roadmap for understanding the fundamental mechanism of an intrinsic activity modulation and structural design of layered cathode materials.展开更多
Three-dimensional(3 D) hybrid of nanocarbons is a very promising way to the high-performance design of electrocatalysis materials.However,sp^(3)-like defect structure,a combination of high strength and conduction of g...Three-dimensional(3 D) hybrid of nanocarbons is a very promising way to the high-performance design of electrocatalysis materials.However,sp^(3)-like defect structure,a combination of high strength and conduction of graphene and carbon nanotubes(CNTs) is rarely reported.Herein,3 D neural-like hybrids of graphene(from reduced graphene oxide) and carbon nanotubes(CNTs) have been integrated via sp^(3)-like defect structure by a hydrothermal approach.The sp^(3)-like defect structure endows 3 D nanocarbon hybrids with an enhanced carrier transfer,high structural stability,and electrocatalytic durability.The neural-like structure is shown to demonstrate a cascade effect of charges and significant performances regarding bio-electrocatalysis and lithium-sulfur energy storage.The concept and mechanism of "sp^(3)-like defect structure" are proposed at an atomic/nanoscale to clarify the generation of rational structure as well as the cascade electron transfer.展开更多
In this paper,the investigation of a novel compact 2×2,2×1,and 1×1 Ultra-Wide Band(UWB)based Multiple-Input Multiple-Output(MIMO)antenna with Defected Ground Structure(DGS)is employed.The proposed Elect...In this paper,the investigation of a novel compact 2×2,2×1,and 1×1 Ultra-Wide Band(UWB)based Multiple-Input Multiple-Output(MIMO)antenna with Defected Ground Structure(DGS)is employed.The proposed Electromagnetic Radiation Structures(ERS)is composed of multiple radiating elements.These MIMO antennas are designed and analyzed with and without DGS.The feeding is introduced by a microstrip-fed line to significantly moderate the radiating structure’s overall size,which is 60×40×1 mm.The high directivity and divergence characteristics are attained by introducing the microstripfed lines perpendicular to each other.And the projected MIMO antenna structures are compared with others by using parameters like Return Loss(RL),Voltage Standing Wave Ratio(VSWR),Radiation Pattern(RP),radiation efficiency,and directivity.The same MIMO set-up is redesigned with DGS,and the resultant parameters are compared.Finally,the Multiple Input and Multiple Output Radiating Structures with and without DGS are compared for result considerations like RL,VSWR,RP,radiation efficiency,and directivity.This projected antenna displays an omnidirectional RP with moderate gain,which is highly recommended for human healthcare applications.By introducing the defected ground structure in bottom layer the lower cut-off frequencies of 2.3,4.5 and 6.0 GHz are achieved with few biological effects on radio propagation in human body communications.The proposed design covers numerous well-known wireless standards,along with dual-function DGS slots,and it can be easily integrated into Wireless Body Area Networks(WBAN)in medical applications.This WBAN links the autonomous nodes that may be situated either in the clothes,on-body or beneath the skin of a person.This system typically advances the complete human body and the inter-connected nodes through a wireless communication channel.展开更多
Structural development defects essentially refer to code structure that violates object-oriented design principles. They make program maintenance challenging and deteriorate software quality over time. Various detecti...Structural development defects essentially refer to code structure that violates object-oriented design principles. They make program maintenance challenging and deteriorate software quality over time. Various detection approaches, ranging from traditional heuristic algorithms to machine learning methods, are used to identify these defects. Ensemble learning methods have strengthened the detection of these defects. However, existing approaches do not simultaneously exploit the capabilities of extracting relevant features from pre-trained models and the performance of neural networks for the classification task. Therefore, our goal has been to design a model that combines a pre-trained model to extract relevant features from code excerpts through transfer learning and a bagging method with a base estimator, a dense neural network, for defect classification. To achieve this, we composed multiple samples of the same size with replacements from the imbalanced dataset MLCQ1. For all the samples, we used the CodeT5-small variant to extract features and trained a bagging method with the neural network Roberta Classification Head to classify defects based on these features. We then compared this model to RandomForest, one of the ensemble methods that yields good results. Our experiments showed that the number of base estimators to use for bagging depends on the defect to be detected. Next, we observed that it was not necessary to use a data balancing technique with our model when the imbalance rate was 23%. Finally, for blob detection, RandomForest had a median MCC value of 0.36 compared to 0.12 for our method. However, our method was predominant in Long Method detection with a median MCC value of 0.53 compared to 0.42 for RandomForest. These results suggest that the performance of ensemble methods in detecting structural development defects is dependent on specific defects.展开更多
As a mixed conductor,LaSr3Fe3O10-δ with triple layer perovskite intergrowth structure can be used as an oxygen separation membrane material and cathode material in solid oxide fuell cells.LaSr3Fe3O10-δ was synthesiz...As a mixed conductor,LaSr3Fe3O10-δ with triple layer perovskite intergrowth structure can be used as an oxygen separation membrane material and cathode material in solid oxide fuell cells.LaSr3Fe3O10-δ was synthesized via citrate acid route.Iodine titration method was used to determine the average valence of transition metal Fe and oxygen nonstoichiometry δ.Conductivities of LaSr3Fe3O10-δ were measured in the oxygen partial pressure range from 10-2×105 to 1×105 Pa,by Ac four probe method.Seebeck coefficient measurement together with conductivity results indicated that LaSr3Fe3O10-δ is a p-type conductor.A linear relationship between the conductivity and logarithm of oxygen partial pressure was observed in the measurement.A defect model was introduced to explain the observed phenomena in the iodine titration,conductivity and Seebeck coefficient measurement.Electrical conductivity relaxation method was used to determine the oxygen chemi-cal diffusion coefficient Dchem.The apparent activation energy of oxygen chemical diffusion was calculated to be 61.4 kJ/mol.展开更多
In this paper,a unit cell of a single-negative metamaterial structure loaded with a meander line and defected ground structure(DGS)is investigated as the principle radiating element of an antenna.The unit cell antenna...In this paper,a unit cell of a single-negative metamaterial structure loaded with a meander line and defected ground structure(DGS)is investigated as the principle radiating element of an antenna.The unit cell antenna causes even or odd mode resonances similar to the unit cell structure depending on the orientation of the microstrip feed used to excite the unit cell.However,the orientation which gives low-frequency resonance is considered here.The unit cell antenna is then loaded with a meander line which is parallel to the split bearing side and connects the other two sides orthogonal to the split bearing side.This modified structure excites another mode of resonance at high frequency when a meander line defect is loaded on the metallic ground plane.Specific parameters of the meander line structure,the DGS shape,and the unit cell are optimized to place these two resonances at different frequencies with proper frequency intervals to enhance the bandwidth.Finally,the feed is placed in an offset position for better impedance matching without affecting the bandwidth The compact dimension of the antenna is 0.25λL×0.23λL×0.02λL,whereλL is the free space wavelength with respect to the center frequency of the impedance bandwidth.The proposed antenna is fabricated and measured.Experimental results reveal that the modified design gives monopole like radiation patterns which achieves a fractional operating bandwidth of 26.6%,from 3.26 to 4.26 GHz for|S11|<−10 dB and a pick gain of 1.26 dBi is realized.In addition,the simulated and measured crosspolarization levels are both less than−15 dB in the horizontal plane.展开更多
Due to rapid growth in wireless communication technology,higher bandwidth requirement for advance telecommunication systems,capable of operating on two or higher bands with higher channel capacities and minimum distor...Due to rapid growth in wireless communication technology,higher bandwidth requirement for advance telecommunication systems,capable of operating on two or higher bands with higher channel capacities and minimum distortion losses is desired.In this paper,a compact Ultra-Wideband(UWB)V-shaped monopole antenna is presented.UWB response is achieved by modifying the ground plane with Chichen Itzia inspired rectangular staircase shape.The proposed V-shaped is designed by incorporating a rectangle,and an inverted isosceles triangle using FR4 substrate.The size of the antenna is 25 mm×26 mm×1.6 mm.The proposed V-shaped monopole antenna produces bandwidth response of 3 GHz Industrial,Scientific,and Medical(ISM),Worldwide Interoperability for Microwave Access(WiMAX),(IEEE 802.11/HIPERLAN band,5G sub 6 GHz)which with an additional square cut amplified the bandwidth response up to 8 GHz ranging from 3.1 GHz to 10.6 GHz attaining UWB defined by Federal Communications Commission(FCC)with a maximum gain of 3.83 dB.The antenna is designed in Ansys HFSS.Results for key performance parameters of the antenna are presented.The measured results are in good agreement with the simulated results.Due to flat gain,uniform group delay,omni directional radiation pattern characteristics and well-matched impedance,the proposed antenna is suitable for WiMAX,ISM and heterogeneous wireless systems.展开更多
Carbon-based metal-free nanomaterials are promising alternatives to precious metals as electrocatalysts of key energy storage and conversion technologies.Of paramount significance are the establishment of design princi...Carbon-based metal-free nanomaterials are promising alternatives to precious metals as electrocatalysts of key energy storage and conversion technologies.Of paramount significance are the establishment of design principles by understanding the catalytic mechanisms and identifying the active sites.Distinct from sp2-conjugated graphene and carbon nanotube,fullerene possesses unique characteristics that are growingly being discovered and exploited by the electrocatalysis community.For instance,the well-defined atomic and molecular structures,the good electron affinity to tune the electronic structures of other substances,the intermolecular self-assembly into superlattices,and the on-demand chemical modification have endowed fullerene with incomparable advantages as electrocatalysts that are otherwise not applicable to other carbon ma-terials.As increasing studies are being reported on this intriguing topic,it is necessary to provide a state-of-the-art overview of the recent progress.This review takes such an initiative by summarizing the promises and challenges in the electrocatalytic applications of fullerene and its derivatives.The content is structured according to the composition and structure of fullerene,including intact fullerene(e.g.,fullerene composite and superlattices)and fullerene derivatives(e.g.,doped,endohedral,and disintegrated fullerene).The synthesis,characterization,catalytic mechanisms,and deficiencies of these fullerene-based materials are explicitly elaborated.We conclude it by sharing our perspectives on the key aspects that future efforts shall consider.展开更多
NH_(2)-UIO66(NU)is a promising photocatalyst for the reduction of Cr(VI)to low-toxic Cr(III)driven by visible light under ambient conditions.However,the main limitation in this process is the ineffi cient ligand to me...NH_(2)-UIO66(NU)is a promising photocatalyst for the reduction of Cr(VI)to low-toxic Cr(III)driven by visible light under ambient conditions.However,the main limitation in this process is the ineffi cient ligand to metal charge transfer(LMCT)of photo-excited electrons,which is caused by inherent energy gap(ΔE_(LMCT)).This study synthesized the defective NU(NUXH,where X is the molar equivalent of the modulator)with reducedΔE_(LMCT)through linkers removal via acid treatment.The electronic structure of NUX-H was systematically investigated,and the results indicated that the structural defects in NUX-H strongly altered the environment of the Zr atoms.Furthermore,they substantially lowered the energy of the unoccupied d orbitals(LUMO),which was benefi cial to effi cient LMCT,resulting in an improved photocatalytic activity of NUX-H toward high-concentration(100 mg/L)Cr(VI)reduction.Compared to NU with defect-free structure,the reducing rate of Cr(VI)was increased by 47 times.This work introduced an alternative strategy in terms of designing effi cient photocatalysts for reducing Cr(VI)under ambient conditions.展开更多
The response of three-dimensional sample of Al, containing vacancy complex, under shear loading was simulated. The molecular dynamics method was used and interaction between atoms was described on the base of pseudopo...The response of three-dimensional sample of Al, containing vacancy complex, under shear loading was simulated. The molecular dynamics method was used and interaction between atoms was described on the base of pseudopotential theory Solitary waves were generated in the sample under mechanical loading. Their interaction with the vacancy complexes was shown to be able to initiate hot spot in that local region of the complexes. Some parameters of the hot spot as well as solitary waves were calculated. The initiation of the hot spot is accompanied with sufficient local structural relaxation.展开更多
Direct visualization of the structural defects in two-dimensional(2D)semiconductors at a large scale plays a significant role in understanding their electrical/optical/magnetic properties,but is challenging.Although t...Direct visualization of the structural defects in two-dimensional(2D)semiconductors at a large scale plays a significant role in understanding their electrical/optical/magnetic properties,but is challenging.Although traditional atomic resolution imaging techniques,such as transmission electron microscopy and scanning tunneling microscopy,can directly image the structural defects,they provide only local-scale information and require complex setups.Here,we develop a simple,non-invasive wet etching method to directly visualize the structural defects in 2D semiconductors at a large scale,including both point defects and grain boundaries.Utilizing this method,we extract successfully the defects density in several different types of monolayer molybdenum disulfide samples,providing key insights into the device functions.Furthermore,the etching method we developed is anisotropic and tunable,opening up opportunities to obtain exotic edge states on demand.展开更多
Concrete piles that were poorly constructed or analyzed in their soil analyses may have structural or geotechnical defects.To examine such defects,an experimental study was conducted to investigate how a defective rei...Concrete piles that were poorly constructed or analyzed in their soil analyses may have structural or geotechnical defects.To examine such defects,an experimental study was conducted to investigate how a defective reinforced concrete pile behaved.These piles were installed and subjected to a compression axial load in the sand that had relative densities of 30%,60%,and 80%.The tests were performed using four concrete model piles:one intact pile and the other three piles had a structural defect(necking)at three different positions of the pile at(0.25 L from the top,center,and 0.25 L bottom).Geotechnical defect(soft layer or debris)was studied using Styrofoam layer at various vertical distances under the pile toe with Y/D=(0,0.5,1 and 1.5)D.The test results showed that the bearing capacity of the structural defect was the most in the case of a neck at 0.25 L from the bottom,followed by a neck at the center,and finally a neck at 0.25 L from the top.In the case of a geotechnical defect,the bearing capacity of the pile decreased with the decrease of the vertical distance between the soft layer and the pile toe.展开更多
This paper presents a compact Multiple Input Multiple Output(MIMO)antenna with WLAN band notch for Ultra-Wideband(UWB)applications.The antenna is designed on 0.8mmthick low-cost FR-4 substrate having a compact size of...This paper presents a compact Multiple Input Multiple Output(MIMO)antenna with WLAN band notch for Ultra-Wideband(UWB)applications.The antenna is designed on 0.8mmthick low-cost FR-4 substrate having a compact size of 22mm×30 mm.The proposed antenna comprises of two monopole patches on the top layer of substrate while having a shared ground on its bottom layer.The mutual coupling between adjacent patches has been reduced by using a novel stub with shared ground structure.The stub consists of complementary rectangular slots that disturb the surface current direction and thus result in reducing mutual coupling between two ports.A slot is etched in the radiating patch for WLAN band notch.The slot is used to suppress frequencies ranging from 5.1 to 5.9 GHz.The results show that the proposed antenna has a very good impedance bandwidth of|S11|<−10 dB within the frequency band from 3.1–14 GHz.A low mutual coupling of less than−23 dB is achieved within the entire UWB band.Furthermore,the antenna has a peak gain of 5.8 dB,low ECC<0.002 and high Diversity Gain(DG>9.98).展开更多
Mutual coupling reduction or isolation enhancement in antenna arrays is an important area of research as it severely affects the performance of an antenna.In this paper,a new type of compact and highly isolated Multip...Mutual coupling reduction or isolation enhancement in antenna arrays is an important area of research as it severely affects the performance of an antenna.In this paper,a new type of compact and highly isolated Multiple-Input-Multiple-Output(MIMO)antenna for ultra-wideband(UWB)applications is presented.The design consists of four radiators that are orthogonally positioned and confined to a compact 40×40×0.8 mm3 space.The final antenna design uses an inverted L shape partial ground to produce an acceptable reflection coefficient(S11<−10 dB)in an entire UWB band(3.1–10.6)giga hertz(GHz).Moreover,the inter-element isolation has also been enhanced to>20 db for majority of the UWB band.The antenna was fabricated and tested with the vector network analyzer(VNA)and in an anechoic chamber for scattering parameters and radiation patterns.Furthermore,different MIMO diversity performance metrics are also measured to validate the proposed model.The simulation results and the experimental results from the constructed model agree quite well.The proposed antenna is compared with similar designs in recently published literature for various performance metrics.Because of its low envelope correlation coefficient(ECC<0.1),high diversity gain(DG>9.99 dB),peak gain of 4.6 dB,reduced channel capacity loss(CCL<0.4 b/s/Hz),and average radiation efficiency of over 85%,the proposed MIMO antenna is ideally suited for practical UWB applications.展开更多
Rare-earth tantalates and niobates(REjTaO7 and REjNbO7)have been considered as promising candidate thermal barrier coating(TBC)materials in next generation gas-turbine engines due to their ultra-low thermal conductivi...Rare-earth tantalates and niobates(REjTaO7 and REjNbO7)have been considered as promising candidate thermal barrier coating(TBC)materials in next generation gas-turbine engines due to their ultra-low thermal conductivity and better thermal stability than yttria-stabilized zirconia(YSZ).However,the low Vickers hardness and toughness are the main shortcomings of RE;TaO-and REjNbOr that limit their applications as TBC materials.To increase the hardness,high entropy(Yu3Ybu3Er/3)sTaOr,(Y13YbnErns)NbO,and(Sm1/6Eu1/6Y 1/6Yb1/6Lu1/6Er1/6)3(Nb1/2Ta1/2)O7 are designed and synthesized in this study.These high entropy ceramics exhibit high Vickers hardness(10.912.0 GPa),close thermal expansion coefficients to that of single-principal-component RE3TaO,and RE;NbO,(7.9×10^-6-10.8×10-6 C-1 at room temperature),good phase stability,and good chemical compatibility with thermally grown Al2O3,which make them promising for applications as candidate TBC materials.展开更多
Low-loss tungsten–bronze microwave dielectric ceramics are dielectric materials with potential application value for miniaturized dielectric filters and antennas in the fifth-generation(5G)communication technology.In...Low-loss tungsten–bronze microwave dielectric ceramics are dielectric materials with potential application value for miniaturized dielectric filters and antennas in the fifth-generation(5G)communication technology.In this work,a novel Al/Nd co-doping method of Ba_(4)Nd_(9.33)Ti_(18)O_(54)(BNT)ceramics with a chemical formula of Ba_(4)Nd_(9.33+z/3)Ti_(18−z)Al_(z)O_(54)(BNT–AN,0≤z≤2)was proposed to improve the dielectric properties through structural and defect modulation.Together with Al-doped ceramics(Ba_(4)Nd_(9.33)Ti_(18−z)Al_(4z/3)O_(54),BNT–A,0≤z≤2)for comparison,the ceramics were prepared by a solid state method.It is found that Al/Nd co-doping method has a significant effect on improving the dielectric properties compared with Al doping.As the doping amount z increased,the relative dielectric constant(εr)and the temperature coefficient of resonant frequency(τf)of the ceramics decreased,and the Q×f values of the ceramics obviously increased when z≤1.5.Excellent microwave dielectric properties ofεr=72.2,Q×f=16,480 GHz,andτf=+14.3 ppm/℃were achieved in BNT–AN ceramics with z=1.25.Raman spectroscopy and thermally stimulated depolarization current(TSDC)technique were firstly combined to analyze the structures and defects in microwave dielectric ceramics.It is shown that the improvement on Q×f values was originated from the decrease in the strength of the A-site cation vibration and the concentration of oxygen vacancies(VO××),demonstrating the effect and mechanism underlying for structural and defect modulation on the performance improvement of microwave dielectric ceramics.展开更多
This paper considers that the crystal grains of HDDR Pr2Fe14B permanent magnetic material are cubic, the size is 0.3 μm, and the crystal grains are in simple cubic accumulation. It is considered that there are bounda...This paper considers that the crystal grains of HDDR Pr2Fe14B permanent magnetic material are cubic, the size is 0.3 μm, and the crystal grains are in simple cubic accumulation. It is considered that there are boundary phases between grains. It is assumed that the boundary phases are non-magnetic phases with the thickness of d, and evenly distributed between grains. The anisotropy expression of single grain boundary is given considering structure defect and intergranular exchange coupling interaction. Based on micro-magnetic simulation calculation, the variation of the average anisotropy of a single grain with the structural defects and boundary phases was calculated. The results show that when the thickness of structural defects is constant, the average anisotropy of a single grain decreases with increasing of grain boundary phase thickness, and while the thickness of grain boundary phase is constant, it also decreases with increasing of structural defect thickness.展开更多
As per the entail in wireless communication, the ever increasing switching speeds of digital devices pose significant challenges. Signal quality is more important for high speed products and the signal integrity ...As per the entail in wireless communication, the ever increasing switching speeds of digital devices pose significant challenges. Signal quality is more important for high speed products and the signal integrity must ensure reliable transmission where signal integrity is a measure of the quality of an electrical signal. A high speed differential signal will result in signal integrity issues such as crosstalk and radiated emission. One of the solutions to suppress radiated emission is defected ground pattern. This paper introduces a novel trident incurvature shaped defected ground structure to suppress radiated emission that arises in high speed differential signal. The proposed defected ground structure is implemented using Ansoft HFSS simulation tool and its performance is quantified in terms of scattering parameters. The proposed trident incurvature shaped defected ground pattern reduces near end coupling and far end coupling by more than 6 dB and 2 dB respectively. It also provides better return loss and insertion loss in the frequency range 1 - 6 GHz.展开更多
For the pursuit of high energy supercapacitors,the development of high performance pseudocapacitance or battery-type negative electrode material is urgently needed to make up for the capacity shortage of commercial el...For the pursuit of high energy supercapacitors,the development of high performance pseudocapacitance or battery-type negative electrode material is urgently needed to make up for the capacity shortage of commercial electric double layer capacitor(EDLC)type materials.Herein,a porous and defect-rich Fe_(x)Bi_(2-x)S_(3) solid solution structure is firstly constructed by employing Fe-doped Bi_(2)O_(2)CO_(3) porous nanosheets as a precursor,which presents dramatically increased energy storage performance than Bi_(2)S_(3) and FeS_(2) phase.For the optimized Fe_(x)Bi_(2-x)S_(3) solid solution(FeBiS-60%),the Fe solute is free and random dispersed in Bi_(2)S_(3) framework,which can effectively modulate the electronic structure of Bi element and introduce rich-defect due to the existence of Fe(II).Meanwhile,the FeBiS-60%,constructed by pore nanosheets that are assembled by self-supported basic nanorod units,presents rich mesoporous channels for fast mass transfer and abundant active sites for promoting capacity performance.Therefore,a high capacitance of 832.8 F·g^(-1) at a current density of 1 A·g^(-1) is achieved by the FeBiS-60%electrode.Furthermore,a fabricated Ni3S_(2)@Co_(3)S_(4)(NCS)//FeBiS-60%hybrid supercapacitor device delivers an outstanding energy density of 85.33 Wh·kg^(-1) at the power density of 0.799 kW·kg^(-1),and ultra-long lifespan of remaining 86.7%initial capacitance after 8700 cycles.展开更多
In this paper, we present the finding that periodic structural defects(PSDs) along a Bragg grating can shift the Bragg wavelength. This effect is theoretically analyzed and confirmed by numerical calculation. We find ...In this paper, we present the finding that periodic structural defects(PSDs) along a Bragg grating can shift the Bragg wavelength. This effect is theoretically analyzed and confirmed by numerical calculation. We find that the Bragg wavelength shift is determined by the defect size and the period of the defects. The Bragg wavelength can be well tuned by properly designing the PSDs, and this may provide an alternative method to fabricate grating-based multiwavelength devices, including optical filter arrays and laser arrays. In regards to wavelength precision, the proposed method has an advantage over the traditional methods, where the Bragg wavelengths are changed directly by changing the grating period. In addition, the proposed method can maintain grating strength when tuning the wavelength since only the period of defects is changed. This will be a benefit for devices such as arrays.展开更多
基金financially supported by the Science and Technology of Guangxi Zhuang Autonomous Region(the Guangxi special Fund for Scientific Center and Talent Resources:AD18281073,Chongke 2018AD15002 and FA2020011)。
文摘Layered Ni-rich transition metal oxide is treated as the most promising alternative cathode due to their high-capacity and flexible composition.However,the severe lattice strain and slow Li-ion migration kinetics severely restrict their practical application.Herein,a novelty strategy induced pinning effect and defect structure in layered Ni-rich transition metal oxide cathodes is proposed via a facile cation(iron ion)/anion(polyanion)co-doping method.Subsequently,the effects of pinning effect and defect structure on element valence state,crystal structure,morphology,lattice strain,and electrochemical performance during lithiation/delithiation are systematically explored.The detailed characterizations(soft X-ray absorption spectroscopy(sXAS),in-situ X-ray diffraction(XRD),etc.)and density functional theory(DFT)calculation demonstrate that the pinning effects built-in LiNi_(0.9)Co_(0.05)Mn_(0.05)O_(2)materials by the dual-site occupation of iron ions on lithium and transition metal sites effectively alleviate the abrupt lattice strain caused by an unfavorable phase transition and the subsequent induction of defect structures in the Li layer can greatly reduce the lithium-ion diffusion barrier.Therefore,the modified LiNi_(0.9)Co_(0.05)Mn_(0.05)O_(2)exhibits a high-capacity of 206.5 mAh g^(-1)and remarkably enhanced capacity retention of 93.9%after 100 cycles,far superior to~14.1%of the pristine cathodes.Besides,an excellent discharge capacity of 180.1 mAh g^(-1)at 10 C rate is maintained,illustrating its remarkable rate capability.This work reports a pinning effect and defect engineering method to suppress the lattice strain and alleviate lithium-ion kinetic barriers in the Ni-rich layered cathodes,providing a roadmap for understanding the fundamental mechanism of an intrinsic activity modulation and structural design of layered cathode materials.
基金a joint National Natural Science Foundation of China-Deutsche Forschungsgemeinschaft(NSFC-DFG) project(NSFC grant 51861135313,DFG JA466/39-1)supported by National Natural Science Foundation of China(21706199)International Science & Technology Cooperation Program of China(2015DFE52870)Jilin Province Science and Technology Development Plan(20180101208JC)。
文摘Three-dimensional(3 D) hybrid of nanocarbons is a very promising way to the high-performance design of electrocatalysis materials.However,sp^(3)-like defect structure,a combination of high strength and conduction of graphene and carbon nanotubes(CNTs) is rarely reported.Herein,3 D neural-like hybrids of graphene(from reduced graphene oxide) and carbon nanotubes(CNTs) have been integrated via sp^(3)-like defect structure by a hydrothermal approach.The sp^(3)-like defect structure endows 3 D nanocarbon hybrids with an enhanced carrier transfer,high structural stability,and electrocatalytic durability.The neural-like structure is shown to demonstrate a cascade effect of charges and significant performances regarding bio-electrocatalysis and lithium-sulfur energy storage.The concept and mechanism of "sp^(3)-like defect structure" are proposed at an atomic/nanoscale to clarify the generation of rational structure as well as the cascade electron transfer.
文摘In this paper,the investigation of a novel compact 2×2,2×1,and 1×1 Ultra-Wide Band(UWB)based Multiple-Input Multiple-Output(MIMO)antenna with Defected Ground Structure(DGS)is employed.The proposed Electromagnetic Radiation Structures(ERS)is composed of multiple radiating elements.These MIMO antennas are designed and analyzed with and without DGS.The feeding is introduced by a microstrip-fed line to significantly moderate the radiating structure’s overall size,which is 60×40×1 mm.The high directivity and divergence characteristics are attained by introducing the microstripfed lines perpendicular to each other.And the projected MIMO antenna structures are compared with others by using parameters like Return Loss(RL),Voltage Standing Wave Ratio(VSWR),Radiation Pattern(RP),radiation efficiency,and directivity.The same MIMO set-up is redesigned with DGS,and the resultant parameters are compared.Finally,the Multiple Input and Multiple Output Radiating Structures with and without DGS are compared for result considerations like RL,VSWR,RP,radiation efficiency,and directivity.This projected antenna displays an omnidirectional RP with moderate gain,which is highly recommended for human healthcare applications.By introducing the defected ground structure in bottom layer the lower cut-off frequencies of 2.3,4.5 and 6.0 GHz are achieved with few biological effects on radio propagation in human body communications.The proposed design covers numerous well-known wireless standards,along with dual-function DGS slots,and it can be easily integrated into Wireless Body Area Networks(WBAN)in medical applications.This WBAN links the autonomous nodes that may be situated either in the clothes,on-body or beneath the skin of a person.This system typically advances the complete human body and the inter-connected nodes through a wireless communication channel.
文摘Structural development defects essentially refer to code structure that violates object-oriented design principles. They make program maintenance challenging and deteriorate software quality over time. Various detection approaches, ranging from traditional heuristic algorithms to machine learning methods, are used to identify these defects. Ensemble learning methods have strengthened the detection of these defects. However, existing approaches do not simultaneously exploit the capabilities of extracting relevant features from pre-trained models and the performance of neural networks for the classification task. Therefore, our goal has been to design a model that combines a pre-trained model to extract relevant features from code excerpts through transfer learning and a bagging method with a base estimator, a dense neural network, for defect classification. To achieve this, we composed multiple samples of the same size with replacements from the imbalanced dataset MLCQ1. For all the samples, we used the CodeT5-small variant to extract features and trained a bagging method with the neural network Roberta Classification Head to classify defects based on these features. We then compared this model to RandomForest, one of the ensemble methods that yields good results. Our experiments showed that the number of base estimators to use for bagging depends on the defect to be detected. Next, we observed that it was not necessary to use a data balancing technique with our model when the imbalance rate was 23%. Finally, for blob detection, RandomForest had a median MCC value of 0.36 compared to 0.12 for our method. However, our method was predominant in Long Method detection with a median MCC value of 0.53 compared to 0.42 for RandomForest. These results suggest that the performance of ensemble methods in detecting structural development defects is dependent on specific defects.
基金supported by the National Natural Science Foundation of China (50672100)the Provincial Education Department of Jiangxi Province ([2006]313)
文摘As a mixed conductor,LaSr3Fe3O10-δ with triple layer perovskite intergrowth structure can be used as an oxygen separation membrane material and cathode material in solid oxide fuell cells.LaSr3Fe3O10-δ was synthesized via citrate acid route.Iodine titration method was used to determine the average valence of transition metal Fe and oxygen nonstoichiometry δ.Conductivities of LaSr3Fe3O10-δ were measured in the oxygen partial pressure range from 10-2×105 to 1×105 Pa,by Ac four probe method.Seebeck coefficient measurement together with conductivity results indicated that LaSr3Fe3O10-δ is a p-type conductor.A linear relationship between the conductivity and logarithm of oxygen partial pressure was observed in the measurement.A defect model was introduced to explain the observed phenomena in the iodine titration,conductivity and Seebeck coefficient measurement.Electrical conductivity relaxation method was used to determine the oxygen chemi-cal diffusion coefficient Dchem.The apparent activation energy of oxygen chemical diffusion was calculated to be 61.4 kJ/mol.
文摘In this paper,a unit cell of a single-negative metamaterial structure loaded with a meander line and defected ground structure(DGS)is investigated as the principle radiating element of an antenna.The unit cell antenna causes even or odd mode resonances similar to the unit cell structure depending on the orientation of the microstrip feed used to excite the unit cell.However,the orientation which gives low-frequency resonance is considered here.The unit cell antenna is then loaded with a meander line which is parallel to the split bearing side and connects the other two sides orthogonal to the split bearing side.This modified structure excites another mode of resonance at high frequency when a meander line defect is loaded on the metallic ground plane.Specific parameters of the meander line structure,the DGS shape,and the unit cell are optimized to place these two resonances at different frequencies with proper frequency intervals to enhance the bandwidth.Finally,the feed is placed in an offset position for better impedance matching without affecting the bandwidth The compact dimension of the antenna is 0.25λL×0.23λL×0.02λL,whereλL is the free space wavelength with respect to the center frequency of the impedance bandwidth.The proposed antenna is fabricated and measured.Experimental results reveal that the modified design gives monopole like radiation patterns which achieves a fractional operating bandwidth of 26.6%,from 3.26 to 4.26 GHz for|S11|<−10 dB and a pick gain of 1.26 dBi is realized.In addition,the simulated and measured crosspolarization levels are both less than−15 dB in the horizontal plane.
基金This work was supported by the Research Program through the National Research Foundation of Korea,NRF-2019R1A2C1005920,S.K.
文摘Due to rapid growth in wireless communication technology,higher bandwidth requirement for advance telecommunication systems,capable of operating on two or higher bands with higher channel capacities and minimum distortion losses is desired.In this paper,a compact Ultra-Wideband(UWB)V-shaped monopole antenna is presented.UWB response is achieved by modifying the ground plane with Chichen Itzia inspired rectangular staircase shape.The proposed V-shaped is designed by incorporating a rectangle,and an inverted isosceles triangle using FR4 substrate.The size of the antenna is 25 mm×26 mm×1.6 mm.The proposed V-shaped monopole antenna produces bandwidth response of 3 GHz Industrial,Scientific,and Medical(ISM),Worldwide Interoperability for Microwave Access(WiMAX),(IEEE 802.11/HIPERLAN band,5G sub 6 GHz)which with an additional square cut amplified the bandwidth response up to 8 GHz ranging from 3.1 GHz to 10.6 GHz attaining UWB defined by Federal Communications Commission(FCC)with a maximum gain of 3.83 dB.The antenna is designed in Ansys HFSS.Results for key performance parameters of the antenna are presented.The measured results are in good agreement with the simulated results.Due to flat gain,uniform group delay,omni directional radiation pattern characteristics and well-matched impedance,the proposed antenna is suitable for WiMAX,ISM and heterogeneous wireless systems.
基金This study is supported by the National Natural Science Foundation of China(21925104)the Natural Science Foun-dation of Hubei Province(2021CFA020)the start-up funding of Huazhong University of Science and Technology(3004110178).
文摘Carbon-based metal-free nanomaterials are promising alternatives to precious metals as electrocatalysts of key energy storage and conversion technologies.Of paramount significance are the establishment of design principles by understanding the catalytic mechanisms and identifying the active sites.Distinct from sp2-conjugated graphene and carbon nanotube,fullerene possesses unique characteristics that are growingly being discovered and exploited by the electrocatalysis community.For instance,the well-defined atomic and molecular structures,the good electron affinity to tune the electronic structures of other substances,the intermolecular self-assembly into superlattices,and the on-demand chemical modification have endowed fullerene with incomparable advantages as electrocatalysts that are otherwise not applicable to other carbon ma-terials.As increasing studies are being reported on this intriguing topic,it is necessary to provide a state-of-the-art overview of the recent progress.This review takes such an initiative by summarizing the promises and challenges in the electrocatalytic applications of fullerene and its derivatives.The content is structured according to the composition and structure of fullerene,including intact fullerene(e.g.,fullerene composite and superlattices)and fullerene derivatives(e.g.,doped,endohedral,and disintegrated fullerene).The synthesis,characterization,catalytic mechanisms,and deficiencies of these fullerene-based materials are explicitly elaborated.We conclude it by sharing our perspectives on the key aspects that future efforts shall consider.
基金This work was supported by the National Key Research and Development Program of China(No.2020YFA0211000)the National Natural Science Foundation of China(Nos.21876114,21761142011,and 51572174)+3 种基金the Shanghai Government(Nos.19DZ1205102 and 19160712900)the International Joint Laboratory on Resource Chemistry(No.IJLRC)the Ministry of Education of China(No.PCSIRT_IRT_16R49)This research was also supported by The Program for Professor of Special Appointment(Eastern Scholar)at Shanghai Institutions of Higher Learning,the Shuguang Research Program of Shanghai Education Committee,and the Shanghai Engineering Research Center of Green Energy Chemical Engineering(No.18DZ2254200).
文摘NH_(2)-UIO66(NU)is a promising photocatalyst for the reduction of Cr(VI)to low-toxic Cr(III)driven by visible light under ambient conditions.However,the main limitation in this process is the ineffi cient ligand to metal charge transfer(LMCT)of photo-excited electrons,which is caused by inherent energy gap(ΔE_(LMCT)).This study synthesized the defective NU(NUXH,where X is the molar equivalent of the modulator)with reducedΔE_(LMCT)through linkers removal via acid treatment.The electronic structure of NUX-H was systematically investigated,and the results indicated that the structural defects in NUX-H strongly altered the environment of the Zr atoms.Furthermore,they substantially lowered the energy of the unoccupied d orbitals(LUMO),which was benefi cial to effi cient LMCT,resulting in an improved photocatalytic activity of NUX-H toward high-concentration(100 mg/L)Cr(VI)reduction.Compared to NU with defect-free structure,the reducing rate of Cr(VI)was increased by 47 times.This work introduced an alternative strategy in terms of designing effi cient photocatalysts for reducing Cr(VI)under ambient conditions.
文摘The response of three-dimensional sample of Al, containing vacancy complex, under shear loading was simulated. The molecular dynamics method was used and interaction between atoms was described on the base of pseudopotential theory Solitary waves were generated in the sample under mechanical loading. Their interaction with the vacancy complexes was shown to be able to initiate hot spot in that local region of the complexes. Some parameters of the hot spot as well as solitary waves were calculated. The initiation of the hot spot is accompanied with sufficient local structural relaxation.
基金the Key-Area Research and Development Program of Guangdong Province,China(Grant No.2020B0101340001)the Strategic Priority Research Program of Chinese Academy of Sciences(CAS)(Grant No.XDB30000000)the National Natural Science Foundation of China(Grant Nos.61888102 and 11834017)。
文摘Direct visualization of the structural defects in two-dimensional(2D)semiconductors at a large scale plays a significant role in understanding their electrical/optical/magnetic properties,but is challenging.Although traditional atomic resolution imaging techniques,such as transmission electron microscopy and scanning tunneling microscopy,can directly image the structural defects,they provide only local-scale information and require complex setups.Here,we develop a simple,non-invasive wet etching method to directly visualize the structural defects in 2D semiconductors at a large scale,including both point defects and grain boundaries.Utilizing this method,we extract successfully the defects density in several different types of monolayer molybdenum disulfide samples,providing key insights into the device functions.Furthermore,the etching method we developed is anisotropic and tunable,opening up opportunities to obtain exotic edge states on demand.
文摘Concrete piles that were poorly constructed or analyzed in their soil analyses may have structural or geotechnical defects.To examine such defects,an experimental study was conducted to investigate how a defective reinforced concrete pile behaved.These piles were installed and subjected to a compression axial load in the sand that had relative densities of 30%,60%,and 80%.The tests were performed using four concrete model piles:one intact pile and the other three piles had a structural defect(necking)at three different positions of the pile at(0.25 L from the top,center,and 0.25 L bottom).Geotechnical defect(soft layer or debris)was studied using Styrofoam layer at various vertical distances under the pile toe with Y/D=(0,0.5,1 and 1.5)D.The test results showed that the bearing capacity of the structural defect was the most in the case of a neck at 0.25 L from the bottom,followed by a neck at the center,and finally a neck at 0.25 L from the top.In the case of a geotechnical defect,the bearing capacity of the pile decreased with the decrease of the vertical distance between the soft layer and the pile toe.
基金The authors would like to acknowledge the support from Taif University Researchers Supporting Project Number (TURSP-2020/264),Taif University,。
文摘This paper presents a compact Multiple Input Multiple Output(MIMO)antenna with WLAN band notch for Ultra-Wideband(UWB)applications.The antenna is designed on 0.8mmthick low-cost FR-4 substrate having a compact size of 22mm×30 mm.The proposed antenna comprises of two monopole patches on the top layer of substrate while having a shared ground on its bottom layer.The mutual coupling between adjacent patches has been reduced by using a novel stub with shared ground structure.The stub consists of complementary rectangular slots that disturb the surface current direction and thus result in reducing mutual coupling between two ports.A slot is etched in the radiating patch for WLAN band notch.The slot is used to suppress frequencies ranging from 5.1 to 5.9 GHz.The results show that the proposed antenna has a very good impedance bandwidth of|S11|<−10 dB within the frequency band from 3.1–14 GHz.A low mutual coupling of less than−23 dB is achieved within the entire UWB band.Furthermore,the antenna has a peak gain of 5.8 dB,low ECC<0.002 and high Diversity Gain(DG>9.98).
基金Deanship of ScientificResearch,King Abdulaziz University for providing financial vide grant number (KEP-MSc-41-135-1443).
文摘Mutual coupling reduction or isolation enhancement in antenna arrays is an important area of research as it severely affects the performance of an antenna.In this paper,a new type of compact and highly isolated Multiple-Input-Multiple-Output(MIMO)antenna for ultra-wideband(UWB)applications is presented.The design consists of four radiators that are orthogonally positioned and confined to a compact 40×40×0.8 mm3 space.The final antenna design uses an inverted L shape partial ground to produce an acceptable reflection coefficient(S11<−10 dB)in an entire UWB band(3.1–10.6)giga hertz(GHz).Moreover,the inter-element isolation has also been enhanced to>20 db for majority of the UWB band.The antenna was fabricated and tested with the vector network analyzer(VNA)and in an anechoic chamber for scattering parameters and radiation patterns.Furthermore,different MIMO diversity performance metrics are also measured to validate the proposed model.The simulation results and the experimental results from the constructed model agree quite well.The proposed antenna is compared with similar designs in recently published literature for various performance metrics.Because of its low envelope correlation coefficient(ECC<0.1),high diversity gain(DG>9.99 dB),peak gain of 4.6 dB,reduced channel capacity loss(CCL<0.4 b/s/Hz),and average radiation efficiency of over 85%,the proposed MIMO antenna is ideally suited for practical UWB applications.
基金This study was financially supported by the National Natural Science Foundation of China(Nos.51672064 and 51972089).
文摘Rare-earth tantalates and niobates(REjTaO7 and REjNbO7)have been considered as promising candidate thermal barrier coating(TBC)materials in next generation gas-turbine engines due to their ultra-low thermal conductivity and better thermal stability than yttria-stabilized zirconia(YSZ).However,the low Vickers hardness and toughness are the main shortcomings of RE;TaO-and REjNbOr that limit their applications as TBC materials.To increase the hardness,high entropy(Yu3Ybu3Er/3)sTaOr,(Y13YbnErns)NbO,and(Sm1/6Eu1/6Y 1/6Yb1/6Lu1/6Er1/6)3(Nb1/2Ta1/2)O7 are designed and synthesized in this study.These high entropy ceramics exhibit high Vickers hardness(10.912.0 GPa),close thermal expansion coefficients to that of single-principal-component RE3TaO,and RE;NbO,(7.9×10^-6-10.8×10-6 C-1 at room temperature),good phase stability,and good chemical compatibility with thermally grown Al2O3,which make them promising for applications as candidate TBC materials.
基金This work was supported by the National Key R&D Program of China(No.2017YFB0406301)the Key-Area Research and Development Program of Guangdong Province(No.2020B010176001)the National Natural Science Foundation of China(No.51872160).
文摘Low-loss tungsten–bronze microwave dielectric ceramics are dielectric materials with potential application value for miniaturized dielectric filters and antennas in the fifth-generation(5G)communication technology.In this work,a novel Al/Nd co-doping method of Ba_(4)Nd_(9.33)Ti_(18)O_(54)(BNT)ceramics with a chemical formula of Ba_(4)Nd_(9.33+z/3)Ti_(18−z)Al_(z)O_(54)(BNT–AN,0≤z≤2)was proposed to improve the dielectric properties through structural and defect modulation.Together with Al-doped ceramics(Ba_(4)Nd_(9.33)Ti_(18−z)Al_(4z/3)O_(54),BNT–A,0≤z≤2)for comparison,the ceramics were prepared by a solid state method.It is found that Al/Nd co-doping method has a significant effect on improving the dielectric properties compared with Al doping.As the doping amount z increased,the relative dielectric constant(εr)and the temperature coefficient of resonant frequency(τf)of the ceramics decreased,and the Q×f values of the ceramics obviously increased when z≤1.5.Excellent microwave dielectric properties ofεr=72.2,Q×f=16,480 GHz,andτf=+14.3 ppm/℃were achieved in BNT–AN ceramics with z=1.25.Raman spectroscopy and thermally stimulated depolarization current(TSDC)technique were firstly combined to analyze the structures and defects in microwave dielectric ceramics.It is shown that the improvement on Q×f values was originated from the decrease in the strength of the A-site cation vibration and the concentration of oxygen vacancies(VO××),demonstrating the effect and mechanism underlying for structural and defect modulation on the performance improvement of microwave dielectric ceramics.
文摘This paper considers that the crystal grains of HDDR Pr2Fe14B permanent magnetic material are cubic, the size is 0.3 μm, and the crystal grains are in simple cubic accumulation. It is considered that there are boundary phases between grains. It is assumed that the boundary phases are non-magnetic phases with the thickness of d, and evenly distributed between grains. The anisotropy expression of single grain boundary is given considering structure defect and intergranular exchange coupling interaction. Based on micro-magnetic simulation calculation, the variation of the average anisotropy of a single grain with the structural defects and boundary phases was calculated. The results show that when the thickness of structural defects is constant, the average anisotropy of a single grain decreases with increasing of grain boundary phase thickness, and while the thickness of grain boundary phase is constant, it also decreases with increasing of structural defect thickness.
文摘As per the entail in wireless communication, the ever increasing switching speeds of digital devices pose significant challenges. Signal quality is more important for high speed products and the signal integrity must ensure reliable transmission where signal integrity is a measure of the quality of an electrical signal. A high speed differential signal will result in signal integrity issues such as crosstalk and radiated emission. One of the solutions to suppress radiated emission is defected ground pattern. This paper introduces a novel trident incurvature shaped defected ground structure to suppress radiated emission that arises in high speed differential signal. The proposed defected ground structure is implemented using Ansoft HFSS simulation tool and its performance is quantified in terms of scattering parameters. The proposed trident incurvature shaped defected ground pattern reduces near end coupling and far end coupling by more than 6 dB and 2 dB respectively. It also provides better return loss and insertion loss in the frequency range 1 - 6 GHz.
基金support from the National Natural Science Foundation of China(Nos.52272222,52072197)Outstanding Youth Foundation of Shandong Province,China(No.ZR2019JQ14)+4 种基金University Youth Innovation Team of Shandong Province(Nos.2019KJC004,202201010318)the Natural Science Foundation of Shandong Province,China(No.ZR2021MB061)Major Scientific and Technological Innovation Project(No.2019JZZY020405)Taishan Scholar Young Talent Program(No.tsqn201909114)Major Basic Research Program of Natural Science Foundation of Shandong Province under Grant(No.ZR2020ZD09).
文摘For the pursuit of high energy supercapacitors,the development of high performance pseudocapacitance or battery-type negative electrode material is urgently needed to make up for the capacity shortage of commercial electric double layer capacitor(EDLC)type materials.Herein,a porous and defect-rich Fe_(x)Bi_(2-x)S_(3) solid solution structure is firstly constructed by employing Fe-doped Bi_(2)O_(2)CO_(3) porous nanosheets as a precursor,which presents dramatically increased energy storage performance than Bi_(2)S_(3) and FeS_(2) phase.For the optimized Fe_(x)Bi_(2-x)S_(3) solid solution(FeBiS-60%),the Fe solute is free and random dispersed in Bi_(2)S_(3) framework,which can effectively modulate the electronic structure of Bi element and introduce rich-defect due to the existence of Fe(II).Meanwhile,the FeBiS-60%,constructed by pore nanosheets that are assembled by self-supported basic nanorod units,presents rich mesoporous channels for fast mass transfer and abundant active sites for promoting capacity performance.Therefore,a high capacitance of 832.8 F·g^(-1) at a current density of 1 A·g^(-1) is achieved by the FeBiS-60%electrode.Furthermore,a fabricated Ni3S_(2)@Co_(3)S_(4)(NCS)//FeBiS-60%hybrid supercapacitor device delivers an outstanding energy density of 85.33 Wh·kg^(-1) at the power density of 0.799 kW·kg^(-1),and ultra-long lifespan of remaining 86.7%initial capacitance after 8700 cycles.
基金supported by the National Natural Science Foundation of China(Youth)(61306068)the Natural Science Foundation of Jiangsu Province of China(BK20130585,BK20140414)+1 种基金the National Natural Science Foundation of China(61435014,61504170,61504058)the National 863 Program(2015AA016902)
文摘In this paper, we present the finding that periodic structural defects(PSDs) along a Bragg grating can shift the Bragg wavelength. This effect is theoretically analyzed and confirmed by numerical calculation. We find that the Bragg wavelength shift is determined by the defect size and the period of the defects. The Bragg wavelength can be well tuned by properly designing the PSDs, and this may provide an alternative method to fabricate grating-based multiwavelength devices, including optical filter arrays and laser arrays. In regards to wavelength precision, the proposed method has an advantage over the traditional methods, where the Bragg wavelengths are changed directly by changing the grating period. In addition, the proposed method can maintain grating strength when tuning the wavelength since only the period of defects is changed. This will be a benefit for devices such as arrays.
