Understanding the adsorption interactions between carbon materials and sulfur compounds has far-reaching impacts,in addition to their well-known important role in energy storage and conversion,such as lithium-ion batt...Understanding the adsorption interactions between carbon materials and sulfur compounds has far-reaching impacts,in addition to their well-known important role in energy storage and conversion,such as lithium-ion batteries.In this paper,properties of intrinsic B or Si single-atom doped,and B-Si codoped graphene(GR)and graphdiyne(GDY)were investigated by using density functional theory-based calculations,in which the optimal doping configurations were explored for potential applications in adsorbing sulfur compounds.Results showed that both B or Si single-atom doping and B-Si codoping could substantially enhance the electron transport properties of GR and GDY,improving their surface activity.Notably,B and Si atoms displayed synergistic effects for the codoped configurations,where B-Si codoped GR/GDY exhibited much better performance in the adsorption of sulfurcontaining chemicals than single-atom doped systems.In addition,results demonstrated that,after B-Si codoping,the adsorption energy and charge transfer amounts of GDY with sulfur compounds were much larger than those of GR,indicating that B-Si codoped GDY might be a favorable material for more effectively interacting with sulfur reagents.展开更多
Combining the mean field Pozhar-Gubbins(PG)theory and the weighted density approximation,a novel method for local thermal conductivity of inhomogeneous fluids is proposed.The correlation effect that is beyond the mean...Combining the mean field Pozhar-Gubbins(PG)theory and the weighted density approximation,a novel method for local thermal conductivity of inhomogeneous fluids is proposed.The correlation effect that is beyond the mean field treatment is taken into account by the simulation-based empirical correlations.The application of this method to confined argon in slit pore shows that its prediction agrees well with the simulation results,and that it performs better than the original PG theory as well as the local averaged density model(LADM).In its further application to the nano-fluidic films,the influences of fluid parameters and pore parameters on the thermal conductivity are calculated and investigated.It is found that both the local thermal conductivity and the overall thermal conductivity can be significantly modulated by these parameters.Specifically,in the supercritical states,the thermal conductivity of the confined fluid shows positive correlation to the bulk density as well as the temperature.However,when the bulk density is small,the thermal conductivity exhibits a decrease-increase transition as the temperature is increased.This is also the case in which the temperature is low.In fact,the decrease-increase transition in both the small-bulk-density and low-temperature cases arises from the capillary condensation in the pore.Furthermore,smaller pore width and/or stronger adsorption potential can raise the critical temperature for condensation,and then are beneficial to the enhancement of the thermal conductivity.These modulation behaviors of the local thermal conductivity lead immediately to the significant difference of the overall thermal conductivity in different phase regions.展开更多
In traditional finite-temperature Kohn–Sham density functional theory(KSDFT),the partial occupation of a large number of high-energy KS eigenstates restricts the use of first-principles molecular dynamics methods at ...In traditional finite-temperature Kohn–Sham density functional theory(KSDFT),the partial occupation of a large number of high-energy KS eigenstates restricts the use of first-principles molecular dynamics methods at extremely high temperatures.However,stochastic density functional theory(SDFT)can overcome this limitation.Recently,SDFT and the related mixed stochastic–deterministic density functional theory,based on a plane-wave basis set,have been implemented in the first-principles electronic structure software ABACUS[Q.Liu and M.Chen,Phys.Rev.B 106,125132(2022)].In this study,we combine SDFT with the Born–Oppenheimer molecular dynamics method to investigate systems with temperatures ranging from a few tens of eV to 1000 eV.Importantly,we train machine-learning-based interatomic models using the SDFT data and employ these deep potential models to simulate large-scale systems with long trajectories.Subsequently,we compute and analyze the structural properties,dynamic properties,and transport coefficients of warm dense matter.展开更多
CaO–SiO_(2)compounds compromise one of the most common series of oxide particles in liquid steels, which could significantly affect the service performance of the steels as crack initiation sites. However, the struct...CaO–SiO_(2)compounds compromise one of the most common series of oxide particles in liquid steels, which could significantly affect the service performance of the steels as crack initiation sites. However, the structural, electronic, and mechanical properties of the compounds in CaO–SiO_(2)system are still not fully clarified due to the difficulties in the experiments. In this study, a thorough investigation of these properties of CaO–SiO_(2)compound particles in steels was conducted based on first-principles density functional theory. Corresponding phases were determined by thermodynamic calculation, including gamma dicalcium silicate(γ-C2S), alpha-prime(L) dicalcium silicate(αL′-C2S), alpha-prime(H) dicalcium silicate(αH′-C2S), alpha dicalcium silicate(α-C2S), rankinite(C3S2), hatrurite(C3S), wollastonite(CS), and pseudowollastonite(Ps-CS). The results showed that the calculated crystal structures of the eight phases agree well with the experimental results. All the eight phases are stable according to the calculated formation energies, and γ-C2S is the most stable. O atom contributes the most to the reactivity of these phases. The Young’s modulus of the eight phases is in the range of 100.63–132.04 GPa. Poisson’s ratio is in the range of0.249–0.281. This study provided further understanding concerning the CaO–SiO_(2)compound particles in steels and fulfilled the corresponding property database, paving the way for inclusion engineering and design in terms of fracture-resistant steels.展开更多
Polybrominated diphenyl ethers(PBDEs)are a kind of serious pollutants in the ocean.Biodegradation is considered as an economical and safe way for PBDEs removal and reductive debromination dominates the initial pathway...Polybrominated diphenyl ethers(PBDEs)are a kind of serious pollutants in the ocean.Biodegradation is considered as an economical and safe way for PBDEs removal and reductive debromination dominates the initial pathway of anaerobic degradation.On the basis of experimental study,Octa-BDE 197,Hepta-BDE 183,Hexa-BDE 153,Penta-BDE 99 and Tetra-BDE 47 were selected as the initial degradation objects,and their debromination degradation were studied using density functional theory.The structures were optimized by Gaussian 09 program.Furthermore,the molecular orbitals and charge distribution were analyzed.All C-Br bond dissociation energies at different positions including ortho,meta and para bromine atoms were calculated and the sequence of debromination was obtained.There is a close relationship between molecular structure,charge,molecular orbital and C-Br bond.All PBDEs exhibited similar debromination pathways with preferential removal of meta and para bromines.展开更多
Developing novel oxygen reduction reaction(ORR)catalysts with high activity is urgent for proton exchange membrane fuel cells.Herein,we investigated a group of size-dependent Pt-based catalysts as promising ORR cataly...Developing novel oxygen reduction reaction(ORR)catalysts with high activity is urgent for proton exchange membrane fuel cells.Herein,we investigated a group of size-dependent Pt-based catalysts as promising ORR catalysts by density functional theory calculations,ranging from single-atom,nanocluster to bulk Pt catalysts.The results showed that the ORR overpotential of these Pt-based catalysts increased when its size enlarged to the nanoparticle scale or reduced to the single-atom scale,and the Pt_(38)cluster had the lowest ORR overpotential(0.46 V)compared with that of Pt_(111)(0.57 V)and single atom Pt(0.7 V).Moreover,we established a volcano curve relationship between the ORR overpotential and binding energy of O*(ΔE_(O*),confirming the intermediate species anchored on Pt38cluster with suitable binding energy located at top of volcano curve.The interaction between intermediate species and Pt-based catalysts were also investigated by the charge distribution and projected density of state and which further confirmed the results of volcano curve.展开更多
As one of the important aspects of upgrading coal tar,the ultra-deep removal of metal ions via the complexation method was investigated by screening four complexing agents and performing density functional theory(DFT)...As one of the important aspects of upgrading coal tar,the ultra-deep removal of metal ions via the complexation method was investigated by screening four complexing agents and performing density functional theory(DFT)simulations.Analysis of the compositions and contents of the metallic compounds in the coal tar revealed that the main components were iron and calcium naphthenates.Direct filtration reduced the mechanical impurity content from 0.24%to 0.0752%,indicating that most of the large particles could be easily removed.Among the four complexing agents,namely,acetic acid,oxalic acid,citric acid,and ethylenediaminetetraacetic acid,oxalic acid exhibited the best demetallization performance.The DFT simulations suggested that the high performance of oxalic acid originated from its 1:1 coordination mode,rigid dicarboxyl structure,and greater binding energy.展开更多
Density functional theory(DFT)is used to calculate the most stable structures of Zr_(n)(n=2-5)clusters as well as the adsorption energy values of Zr_(n)(n=2-5)clusters after adsorbing single water molecule.The results...Density functional theory(DFT)is used to calculate the most stable structures of Zr_(n)(n=2-5)clusters as well as the adsorption energy values of Zr_(n)(n=2-5)clusters after adsorbing single water molecule.The results reveal that there is a significant linear relationship between the adsorption energy values and the energy gaps of the Zr_(n)(n=2-5)clusters.Furthermore,the calculations of the reaction paths between Zr_(n)(n=2-5)and single water molecule show that water molecule can react with Zr_(n)(n=2-5)clusters to dissociate,producing hydrogen,and O atoms mix with the clusters to generate Zr_(n)O(n=2-5),all of which are exothermic reactions.According to the released energy,the Zr4 cluster is the most efficient in Zr_(n)(n=2-5)clusters reacting with single water molecule.The natural population analysis(NPA)and density of states(DOS)demonstrate the production of hydrogen and orbital properties in different energy ranges,respectively,jointly forecasting that Zr_(n)O(n=2-5)will probably continue to react with more water molecules.Our findings contribute to better understanding of Zr's chemical reactivity,which can conduce to the development of effective Zr-based catalysts and hydrogen-production methods.展开更多
In this study,a microscopic method for calculating the nuclear level density(NLD)based on the covariant density functional theory(CDFT)is developed.The particle-hole state density is calculated by a combinatorial meth...In this study,a microscopic method for calculating the nuclear level density(NLD)based on the covariant density functional theory(CDFT)is developed.The particle-hole state density is calculated by a combinatorial method using single-particle level schemes obtained from the CDFT,and the level densities are then obtained by considering collective effects such as vibration and rotation.Our results are compared with those of other NLD models,including phenomenological,microstatisti-cal and nonrelativistic Hartree–Fock–Bogoliubov combinatorial models.This comparison suggests that the general trends among these models are essentially the same,except for some deviations among the different NLD models.In addition,the NLDs obtained using the CDFT combinatorial method with normalization are compared with experimental data,including the observed cumulative number of levels at low excitation energies and the measured NLDs.The CDFT combinatorial method yields results that are in reasonable agreement with the existing experimental data.展开更多
It is a considerably promising strategy to produce fuels and high-value chemicals through an electrochemical conversion process in the green and sustainable energy systems.Catalysts for electrocatalytic reactions,incl...It is a considerably promising strategy to produce fuels and high-value chemicals through an electrochemical conversion process in the green and sustainable energy systems.Catalysts for electrocatalytic reactions,including hydrogen evolution reaction(HER),oxygen evolution reaction(OER),oxygen reduction reaction(ORR),nitrogen reduction reaction(NRR),carbon dioxide reduction reaction(CO_(2)RR),play a significant role in the advanced energy conversion technologies,such as water splitting devices,fuel cells,and rechargeable metal-air batteries.Developing low-cost and highly efficient electrocatalysts is closely related to establishing the composition-structure-activity relationships and fundamental understanding of catalytic mechanisms.Density functional theory(DFT)is emerging as an important computational tool that can provide insights into the relationship between the electrochemical performances and physical/chemical properties of catalysts.This article presents a review on the progress of the DFT,and the computational simulations,within the framework of DFT,for the electrocatalytic processes,as well as the computational designs and virtual screenings of new electrocatalysts.Some useful descriptors and analysis tools for evaluating the electrocatalytic performances are highlighted,including formation energies,d-band model,scaling relation,egorbital occupation,and free energies of adsorption.Furthermore,the remaining questions and perspectives for the development of DFT for electrocatalysis are also proposed.展开更多
In this work, the effect of uniaxial strain on electronic and thermoelectric properties of magnesium silicide using density functional theory(DFT) and Boltzmann transport equations has been studied. We have found that...In this work, the effect of uniaxial strain on electronic and thermoelectric properties of magnesium silicide using density functional theory(DFT) and Boltzmann transport equations has been studied. We have found that the value of band gap increases with tensile strain and decreases with compressive strain. The variations of electrical conductivity,Seebeck coefficient, electronic thermal conductivity, and power factor with temperatures have been calculated. The Seebeck coefficient and power factor are observed to be modified strongly with strain. The value of power factor is found to be higher in comparison with the unstrained structure at 2% tensile strain. We have also calculated phonon dispersion, phonon density of states, specific heat at constant volume, and lattice thermal conductivity of material under uniaxial strain. The phonon properties and lattice thermal conductivity of Mg_2Si under uniaxial strain have been explored first time in this report.展开更多
Whereas the proper choice of reaction solvent constitutes the cornerstone of the green solvent concept,solvent effects on chemical reactions are not mechanistically well understood due to the lack of feasible molecula...Whereas the proper choice of reaction solvent constitutes the cornerstone of the green solvent concept,solvent effects on chemical reactions are not mechanistically well understood due to the lack of feasible molecular models.Herein,by taking the case study of nucleophilic addition reaction in aqueous solution,we extend the proposed multiscale reaction density functional theory(RxDFT)method to investigate the intrinsic free energy profile and total free energy profile,and study the solvent effect on the activation and reaction free energy for the nucleophilic addition reactions of hydroxide anion with methanal and carbon dioxide in aqueous solution.The predictions of the free energy profile in aqueous solution for these two nucleophilic addition reactions from RxDFT have a satisfactory agreement with the results from the RISM and MD-FEP simulation.Meanwhile,the solvent effect is successfully addressed by examining the difference of the free energy profile between the gas phase and aqueous phase.In addition,we investigate the solvent effect on the reactions occurred near solid-liquid interfaces.It is shown that the activation free energy is significantly depressed when reaction takes place in the region within 10A distance to the substrate surface owing to the decrease of hydration free energy at the solid-liquid interface.展开更多
Batteries are the most widely used energy storage devices, and the lithiumion battery is the most heavily commercialized and most widely used battery type in the industry. However, the current rapid development of soc...Batteries are the most widely used energy storage devices, and the lithiumion battery is the most heavily commercialized and most widely used battery type in the industry. However, the current rapid development of society requires a major advancement in battery materials to achieve high capacity,long life cycle, low cost, and reliable safety. Therefore, many new efficient energy storage materials and battery systems are being developed and explored, and their working mechanisms must be clearly understood before industrial application. In recent years, density functional theory (DFT) has been employed in the energy storage field and has made significant contributions to the understanding of electrochemical reaction mechanisms and to virtual screening of promising energy storage materials. In this review,the applications of DFT to battery materials are summarized and exemplified by some representative and up-to-date studies in the literature. The main focuses in this review include the following:1) structural stability estimation by cohesive energy, formation energy, Gibbs free energy, and phonon dispersion spectra calculations;2) the Gibbs free energy calculations for electrochemical reactions, corresponding open-circuit voltage, and theoretical capacity predictions of batteries;3) the analyses of molecule orbitals, band structures, density of states (DOS), and charge distribution of battery materials;4) ion transport kinetics in battery materials;5) simulations of adsorption processes. We conclude the review with the discussion of the assessments and validation of the popular functionals against several benchmarks, and a few suggestions have been given for the selection of density functionals for battery material systems.展开更多
In 2014, 50 years following the introduction of density functional theory (DFT), a rigorous understanding of it was published [AIP Advances, 4, 127,104 (2014)]. This understanding includes two features that complete t...In 2014, 50 years following the introduction of density functional theory (DFT), a rigorous understanding of it was published [AIP Advances, 4, 127,104 (2014)]. This understanding includes two features that complete the theory in practice, inasmuch as they are necessary for its correct application in electronic structure calculations;this understanding elucidates what appears to have been the crucial misunderstanding for 50 years, namely, the confusion between a stationary solution, attainable with most basis sets, following self-consistent iterations, with the ground state solution. The latter is obtained by a calculation that employs the well-defined optimal basis set for the system. The aim of this work is to review the above understanding and to extend it to the relativistic generalization of density functional theory by Rajagopal and Callaway [Phys. Rev. B7, 1912 (1973)]. This extension straightforwardly follows similar steps taken in the non-relativistic case, with the four-component current density, in the former, replacing the electronic charge density, in the latter. This new understanding, which completes relativistic DFT in practice, is expected to be needed for the study of heavy atoms and of materials (from molecules to solids) containing them—as is the case for some high temperature superconductors.展开更多
It is important to study the solvent effect on keto-enol tautomerism that has applications in many areas of chemical engineering.In this work,we use a multiscale reaction density functional theory(Rx DFT)to study the ...It is important to study the solvent effect on keto-enol tautomerism that has applications in many areas of chemical engineering.In this work,we use a multiscale reaction density functional theory(Rx DFT)to study the keto-enol tautomerism and isomerization of pyruvic acid.The results show that both effects of solvation and water assistance could reduce the reaction barriers.The water molecule participates the reaction as a catalyst to accept/give the protons with forming a hexagonal ring in the transition state.As a result of this temporary and intermediate hexagonal ring,the solute configuration undergoes a small variation during the reaction,giving a diminished contribution to the intrinsic reaction free energy.The solvent distribution shows a local ordering behavior near the solute that also reduces the contribution of solvation effect to the reaction barrier.Water assistance plays a major role in both pre-reaction and postreaction process.In terms of the driving force for the reaction,the effects of both solvation and water assistance are important.展开更多
In this paper, we perform the density functional theory(DFT)-based calculations by the first-principles pseudopotential method to investigate the physical properties of the newly discovered superconductor LaRu_2As_2 f...In this paper, we perform the density functional theory(DFT)-based calculations by the first-principles pseudopotential method to investigate the physical properties of the newly discovered superconductor LaRu_2As_2 for the first time.The optimized structural parameters are in good agreement with the experimental results. The calculated independent elastic constants ensure the mechanical stability of the compound. The calculated Cauchy pressure, Pugh's ratio as well as Poisson's ratio indicate that LaRu_2As_2 should behave as a ductile material. Due to low Debye temperature, LaRu_2As_2 may be used as a thermal barrier coating(TBC) material. The new compound should exhibit metallic nature as its valence bands overlap considerably with the conduction bands. LaRu_2As_2 is expected to be a soft material and easily machinable because of its low hardness value of 6.8 GPa. The multi-band nature is observed in the calculated Fermi surface. A highly anisotropic combination of ionic, covalent and metallic interactions is expected to be in accordance with charge density calculation.展开更多
Based on the density functional calculations, the structural and electronic properties of the WS_2/graphene heterojunction under different strains are investigated. The calculated results show that unlike the free mon...Based on the density functional calculations, the structural and electronic properties of the WS_2/graphene heterojunction under different strains are investigated. The calculated results show that unlike the free mono-layer WS_2, the monolayer WS_2 in the equilibrium WS_2/graphene heterojunctionis characterized by indirect band gap due to the weak van der Waals interaction. The height of the schottky barrier for the WS_2/graphene heterojunction is 0.13 eV, which is lower than the conventional metal/MoS_2 contact. Moreover, the band properties and height of schottky barrier for WS_2/graphene heterojunction can be tuned by strain. It is found that the height of the schottky barrier can be tuned to be near zero under an in-plane compressive strain, and the band gap of the WS_2 in the heterojunction is turned into a direct band gap from the indirect band gap with the increasing schottky barrier height under an in-plane tensile strain. Our calculation results may provide a potential guidance for designing and fabricating the WS_(2^-)based field effect transistors.展开更多
We perform the first-principles investigations of the structural,elastic,electronic,and optical properties of SrBO3(B=Cr,Fe)perovskites under pressure based on density functional theory(DFT).This is the first detailed...We perform the first-principles investigations of the structural,elastic,electronic,and optical properties of SrBO3(B=Cr,Fe)perovskites under pressure based on density functional theory(DFT).This is the first detailed pressure-dependent study of the physical properties for these compounds.The calculated structural parameters are consistent with the existing experimental results and slightly decrease with the application of pressure.The mechanical properties are discussed in detail and reveal that the SrCrO3 is harder than SrFeO3.Without pressure,these compounds behave like half-metals,confirmed by their band structure and density of states.Although the SrCrO3 retains its half-metallic nature under pressure,SrFeO3 becomes metallic for both up-spin and down-spin configuration.Both charge density and bond overlap population reveal the covalent nature of Cr–O bond and Fe–O bond in the studied compounds.The optical properties of SrBO3,also discussed for the first time,reveal some interesting results.展开更多
Optimized calculation of dibenzofuran (DF) and 135 polychlorinated diben- zofurans (PCDFs ) was carried out at the B3LYP/6-31G* level in GAUSSIAN 98 program. Based on the theoretical linear solvation energy relationsh...Optimized calculation of dibenzofuran (DF) and 135 polychlorinated diben- zofurans (PCDFs ) was carried out at the B3LYP/6-31G* level in GAUSSIAN 98 program. Based on the theoretical linear solvation energy relationship (TLSER) model, the obtained structural parameters were taken as theoretical descriptors to establish the novel quantitative structure- property relationship (QSPR) model for predicting n-octanol/water partition coefficients (lgKow) of PCDFs. The new model of lgKow achieved in this work contains three variables: energy of the highest occupied molecular orbital (EHOMO), the most negative atomic partial charge (q-) and average molecular polarizability (α), of which R2 = 0.9011 and SD = 0.17 with larger t values. In addition, the variation inflation factors (VIF) of variables in the present model are all less than 5.5, suggesting high accuracy of the lgKow model. And the results of cross-validation test (q2 = 0.8688) and method validation also show this model exhibits optimum stability and better predictive power than semi-empirical method. At the same time, it is found that the aqueous solubility (-lgSw) has high relative correlation with constant volume molar heat capacity (CV0), of which R2 = 0.9777 and SD = 0.22. Moreover, lgKow and -lgSw values of all PCDF congeners were predicted respectively.展开更多
We applied periodic density-functional theory to investigate the adsorption of HCN on x Ni@Pt(111) bimetallic surfaces(x = 1~4). The results have been compared with those obtained on pure Ni(111) and Pt(111) surfaces....We applied periodic density-functional theory to investigate the adsorption of HCN on x Ni@Pt(111) bimetallic surfaces(x = 1~4). The results have been compared with those obtained on pure Ni(111) and Pt(111) surfaces. For all bimetallic surfaces,HCN is preferentially tilted with the CN bond parallel to the surface,and adsorption energies increase with an increasing number of layer Ni atoms on the surface. The adsorption energies of HCN on all bimetallic surfaces are larger than that on the Pt(111) surface,whereas the adsorption energies of HCN on 3Ni@Pt(111) and 4Ni@Pt(111) are larger than that on the Ni(111) surface,indicating that the introduction of Ni to the Pt catalyst could increase the activity of bimetallic catalyst in the hydrogenation reaction for nitriles. Larger adsorption energy of HCN leads to a longer C–N bond length and a smaller CN vibrational frequency. The analysis of Bader charge and vibrational frequencies showed obvious weakening of the adsorbed C–N bond and an indication of sp2 hybridization of both carbon and nitrogen atoms.展开更多
基金the support of the National Natural Science Foundation of China(Grant No.51472074).
文摘Understanding the adsorption interactions between carbon materials and sulfur compounds has far-reaching impacts,in addition to their well-known important role in energy storage and conversion,such as lithium-ion batteries.In this paper,properties of intrinsic B or Si single-atom doped,and B-Si codoped graphene(GR)and graphdiyne(GDY)were investigated by using density functional theory-based calculations,in which the optimal doping configurations were explored for potential applications in adsorbing sulfur compounds.Results showed that both B or Si single-atom doping and B-Si codoping could substantially enhance the electron transport properties of GR and GDY,improving their surface activity.Notably,B and Si atoms displayed synergistic effects for the codoped configurations,where B-Si codoped GR/GDY exhibited much better performance in the adsorption of sulfurcontaining chemicals than single-atom doped systems.In addition,results demonstrated that,after B-Si codoping,the adsorption energy and charge transfer amounts of GDY with sulfur compounds were much larger than those of GR,indicating that B-Si codoped GDY might be a favorable material for more effectively interacting with sulfur reagents.
基金Project supported by the Fundamental Research Fund for the Central Universities of Chinathe Research Project for Independently Cultivate Talents of Hebei Agricultural University (Grant No.ZY2023007)。
文摘Combining the mean field Pozhar-Gubbins(PG)theory and the weighted density approximation,a novel method for local thermal conductivity of inhomogeneous fluids is proposed.The correlation effect that is beyond the mean field treatment is taken into account by the simulation-based empirical correlations.The application of this method to confined argon in slit pore shows that its prediction agrees well with the simulation results,and that it performs better than the original PG theory as well as the local averaged density model(LADM).In its further application to the nano-fluidic films,the influences of fluid parameters and pore parameters on the thermal conductivity are calculated and investigated.It is found that both the local thermal conductivity and the overall thermal conductivity can be significantly modulated by these parameters.Specifically,in the supercritical states,the thermal conductivity of the confined fluid shows positive correlation to the bulk density as well as the temperature.However,when the bulk density is small,the thermal conductivity exhibits a decrease-increase transition as the temperature is increased.This is also the case in which the temperature is low.In fact,the decrease-increase transition in both the small-bulk-density and low-temperature cases arises from the capillary condensation in the pore.Furthermore,smaller pore width and/or stronger adsorption potential can raise the critical temperature for condensation,and then are beneficial to the enhancement of the thermal conductivity.These modulation behaviors of the local thermal conductivity lead immediately to the significant difference of the overall thermal conductivity in different phase regions.
基金supported by the National Natural Science Foundation of China under Grant Nos.12122401 and 12074007.
文摘In traditional finite-temperature Kohn–Sham density functional theory(KSDFT),the partial occupation of a large number of high-energy KS eigenstates restricts the use of first-principles molecular dynamics methods at extremely high temperatures.However,stochastic density functional theory(SDFT)can overcome this limitation.Recently,SDFT and the related mixed stochastic–deterministic density functional theory,based on a plane-wave basis set,have been implemented in the first-principles electronic structure software ABACUS[Q.Liu and M.Chen,Phys.Rev.B 106,125132(2022)].In this study,we combine SDFT with the Born–Oppenheimer molecular dynamics method to investigate systems with temperatures ranging from a few tens of eV to 1000 eV.Importantly,we train machine-learning-based interatomic models using the SDFT data and employ these deep potential models to simulate large-scale systems with long trajectories.Subsequently,we compute and analyze the structural properties,dynamic properties,and transport coefficients of warm dense matter.
基金supported by the National Natural Science Foundation of China (No. 52174297)Fundamental Research Funds for the Central Universities (No. FRF-TP-20026A1)+1 种基金the special grade of China Postdoctoral Science Foundation (No. 2021T140050)supported by USTB MatCom of Beijing Advanced Innovation Center for Materials Genome Engineering。
文摘CaO–SiO_(2)compounds compromise one of the most common series of oxide particles in liquid steels, which could significantly affect the service performance of the steels as crack initiation sites. However, the structural, electronic, and mechanical properties of the compounds in CaO–SiO_(2)system are still not fully clarified due to the difficulties in the experiments. In this study, a thorough investigation of these properties of CaO–SiO_(2)compound particles in steels was conducted based on first-principles density functional theory. Corresponding phases were determined by thermodynamic calculation, including gamma dicalcium silicate(γ-C2S), alpha-prime(L) dicalcium silicate(αL′-C2S), alpha-prime(H) dicalcium silicate(αH′-C2S), alpha dicalcium silicate(α-C2S), rankinite(C3S2), hatrurite(C3S), wollastonite(CS), and pseudowollastonite(Ps-CS). The results showed that the calculated crystal structures of the eight phases agree well with the experimental results. All the eight phases are stable according to the calculated formation energies, and γ-C2S is the most stable. O atom contributes the most to the reactivity of these phases. The Young’s modulus of the eight phases is in the range of 100.63–132.04 GPa. Poisson’s ratio is in the range of0.249–0.281. This study provided further understanding concerning the CaO–SiO_(2)compound particles in steels and fulfilled the corresponding property database, paving the way for inclusion engineering and design in terms of fracture-resistant steels.
基金the National Natural Science Foundation of China(Nos.41406090,42176045)the Science Foundation of Qingdao Agricultural University(No.631302)+1 种基金the Fujian Key Laboratory of Functional Marine Sensing Materials,Minjiang University(No.MJUKF-FMSM202102)the Natural Science Foundation of Shandong Province(Nos.ZR2019 MB020,ZR2020MB119)。
文摘Polybrominated diphenyl ethers(PBDEs)are a kind of serious pollutants in the ocean.Biodegradation is considered as an economical and safe way for PBDEs removal and reductive debromination dominates the initial pathway of anaerobic degradation.On the basis of experimental study,Octa-BDE 197,Hepta-BDE 183,Hexa-BDE 153,Penta-BDE 99 and Tetra-BDE 47 were selected as the initial degradation objects,and their debromination degradation were studied using density functional theory.The structures were optimized by Gaussian 09 program.Furthermore,the molecular orbitals and charge distribution were analyzed.All C-Br bond dissociation energies at different positions including ortho,meta and para bromine atoms were calculated and the sequence of debromination was obtained.There is a close relationship between molecular structure,charge,molecular orbital and C-Br bond.All PBDEs exhibited similar debromination pathways with preferential removal of meta and para bromines.
基金supported by the National Natural Science Foundation of China(92061125,21978294)Beijing Natural Science Foundation(Z200012)+3 种基金Jiangxi Natural Science Foundation(20212ACB213009)DNL Cooperation Fund,CAS(DNL201921)Self-deployed Projects of Ganjiang Innovation Academy,Chinese Academy of Sciences(E055B003)Hebei Natural Science Foundation(B2020103043)。
文摘Developing novel oxygen reduction reaction(ORR)catalysts with high activity is urgent for proton exchange membrane fuel cells.Herein,we investigated a group of size-dependent Pt-based catalysts as promising ORR catalysts by density functional theory calculations,ranging from single-atom,nanocluster to bulk Pt catalysts.The results showed that the ORR overpotential of these Pt-based catalysts increased when its size enlarged to the nanoparticle scale or reduced to the single-atom scale,and the Pt_(38)cluster had the lowest ORR overpotential(0.46 V)compared with that of Pt_(111)(0.57 V)and single atom Pt(0.7 V).Moreover,we established a volcano curve relationship between the ORR overpotential and binding energy of O*(ΔE_(O*),confirming the intermediate species anchored on Pt38cluster with suitable binding energy located at top of volcano curve.The interaction between intermediate species and Pt-based catalysts were also investigated by the charge distribution and projected density of state and which further confirmed the results of volcano curve.
基金the National Energy R&D Center of Petroleum Refining Technology(RIPP,SINOPEC)the National Natural Science Foundation of China(22078347)the Key Research and Development Program of Hebei Province,China(21373303D).
文摘As one of the important aspects of upgrading coal tar,the ultra-deep removal of metal ions via the complexation method was investigated by screening four complexing agents and performing density functional theory(DFT)simulations.Analysis of the compositions and contents of the metallic compounds in the coal tar revealed that the main components were iron and calcium naphthenates.Direct filtration reduced the mechanical impurity content from 0.24%to 0.0752%,indicating that most of the large particles could be easily removed.Among the four complexing agents,namely,acetic acid,oxalic acid,citric acid,and ethylenediaminetetraacetic acid,oxalic acid exhibited the best demetallization performance.The DFT simulations suggested that the high performance of oxalic acid originated from its 1:1 coordination mode,rigid dicarboxyl structure,and greater binding energy.
基金Project supported by the Open Research Fund of Computational Physics Key Laboratory of Sichuan Province,Yibin University,China(Grant No.YBXYJSWL-ZD-2020-005)the Student’s Platform for Innovation and Entrepreneurship Training Program,China(Grant No.S202110616084)。
文摘Density functional theory(DFT)is used to calculate the most stable structures of Zr_(n)(n=2-5)clusters as well as the adsorption energy values of Zr_(n)(n=2-5)clusters after adsorbing single water molecule.The results reveal that there is a significant linear relationship between the adsorption energy values and the energy gaps of the Zr_(n)(n=2-5)clusters.Furthermore,the calculations of the reaction paths between Zr_(n)(n=2-5)and single water molecule show that water molecule can react with Zr_(n)(n=2-5)clusters to dissociate,producing hydrogen,and O atoms mix with the clusters to generate Zr_(n)O(n=2-5),all of which are exothermic reactions.According to the released energy,the Zr4 cluster is the most efficient in Zr_(n)(n=2-5)clusters reacting with single water molecule.The natural population analysis(NPA)and density of states(DOS)demonstrate the production of hydrogen and orbital properties in different energy ranges,respectively,jointly forecasting that Zr_(n)O(n=2-5)will probably continue to react with more water molecules.Our findings contribute to better understanding of Zr's chemical reactivity,which can conduce to the development of effective Zr-based catalysts and hydrogen-production methods.
基金supported by the Natural Science Foundation of Jilin Province(No.20220101017JC)National Natural Science Foundation of China(No.11675063)Key Laboratory of Nuclear Data Foundation(JCKY2020201C157).
文摘In this study,a microscopic method for calculating the nuclear level density(NLD)based on the covariant density functional theory(CDFT)is developed.The particle-hole state density is calculated by a combinatorial method using single-particle level schemes obtained from the CDFT,and the level densities are then obtained by considering collective effects such as vibration and rotation.Our results are compared with those of other NLD models,including phenomenological,microstatisti-cal and nonrelativistic Hartree–Fock–Bogoliubov combinatorial models.This comparison suggests that the general trends among these models are essentially the same,except for some deviations among the different NLD models.In addition,the NLDs obtained using the CDFT combinatorial method with normalization are compared with experimental data,including the observed cumulative number of levels at low excitation energies and the measured NLDs.The CDFT combinatorial method yields results that are in reasonable agreement with the existing experimental data.
基金Foshan Xianhu Laboratory of the Advanced Energy Science and Technology Guangdong Laboratory(XHT2020-003)the Fundamental Research Funds for the Central Universities(WUT:2020Ⅲ029,2020IVA100)。
文摘It is a considerably promising strategy to produce fuels and high-value chemicals through an electrochemical conversion process in the green and sustainable energy systems.Catalysts for electrocatalytic reactions,including hydrogen evolution reaction(HER),oxygen evolution reaction(OER),oxygen reduction reaction(ORR),nitrogen reduction reaction(NRR),carbon dioxide reduction reaction(CO_(2)RR),play a significant role in the advanced energy conversion technologies,such as water splitting devices,fuel cells,and rechargeable metal-air batteries.Developing low-cost and highly efficient electrocatalysts is closely related to establishing the composition-structure-activity relationships and fundamental understanding of catalytic mechanisms.Density functional theory(DFT)is emerging as an important computational tool that can provide insights into the relationship between the electrochemical performances and physical/chemical properties of catalysts.This article presents a review on the progress of the DFT,and the computational simulations,within the framework of DFT,for the electrocatalytic processes,as well as the computational designs and virtual screenings of new electrocatalysts.Some useful descriptors and analysis tools for evaluating the electrocatalytic performances are highlighted,including formation energies,d-band model,scaling relation,egorbital occupation,and free energies of adsorption.Furthermore,the remaining questions and perspectives for the development of DFT for electrocatalysis are also proposed.
基金Council of Scientific&Industrial Research(CSIR),India for providing fellowship.
文摘In this work, the effect of uniaxial strain on electronic and thermoelectric properties of magnesium silicide using density functional theory(DFT) and Boltzmann transport equations has been studied. We have found that the value of band gap increases with tensile strain and decreases with compressive strain. The variations of electrical conductivity,Seebeck coefficient, electronic thermal conductivity, and power factor with temperatures have been calculated. The Seebeck coefficient and power factor are observed to be modified strongly with strain. The value of power factor is found to be higher in comparison with the unstrained structure at 2% tensile strain. We have also calculated phonon dispersion, phonon density of states, specific heat at constant volume, and lattice thermal conductivity of material under uniaxial strain. The phonon properties and lattice thermal conductivity of Mg_2Si under uniaxial strain have been explored first time in this report.
基金supported by National Natural Science Foundation of China(Nos.91934302,21878078 and 21808056)。
文摘Whereas the proper choice of reaction solvent constitutes the cornerstone of the green solvent concept,solvent effects on chemical reactions are not mechanistically well understood due to the lack of feasible molecular models.Herein,by taking the case study of nucleophilic addition reaction in aqueous solution,we extend the proposed multiscale reaction density functional theory(RxDFT)method to investigate the intrinsic free energy profile and total free energy profile,and study the solvent effect on the activation and reaction free energy for the nucleophilic addition reactions of hydroxide anion with methanal and carbon dioxide in aqueous solution.The predictions of the free energy profile in aqueous solution for these two nucleophilic addition reactions from RxDFT have a satisfactory agreement with the results from the RISM and MD-FEP simulation.Meanwhile,the solvent effect is successfully addressed by examining the difference of the free energy profile between the gas phase and aqueous phase.In addition,we investigate the solvent effect on the reactions occurred near solid-liquid interfaces.It is shown that the activation free energy is significantly depressed when reaction takes place in the region within 10A distance to the substrate surface owing to the decrease of hydration free energy at the solid-liquid interface.
基金supported by the Excel ent Dissertation Cultivation Funds of Wuhan University of Technology(2018-YS-013)
文摘Batteries are the most widely used energy storage devices, and the lithiumion battery is the most heavily commercialized and most widely used battery type in the industry. However, the current rapid development of society requires a major advancement in battery materials to achieve high capacity,long life cycle, low cost, and reliable safety. Therefore, many new efficient energy storage materials and battery systems are being developed and explored, and their working mechanisms must be clearly understood before industrial application. In recent years, density functional theory (DFT) has been employed in the energy storage field and has made significant contributions to the understanding of electrochemical reaction mechanisms and to virtual screening of promising energy storage materials. In this review,the applications of DFT to battery materials are summarized and exemplified by some representative and up-to-date studies in the literature. The main focuses in this review include the following:1) structural stability estimation by cohesive energy, formation energy, Gibbs free energy, and phonon dispersion spectra calculations;2) the Gibbs free energy calculations for electrochemical reactions, corresponding open-circuit voltage, and theoretical capacity predictions of batteries;3) the analyses of molecule orbitals, band structures, density of states (DOS), and charge distribution of battery materials;4) ion transport kinetics in battery materials;5) simulations of adsorption processes. We conclude the review with the discussion of the assessments and validation of the popular functionals against several benchmarks, and a few suggestions have been given for the selection of density functionals for battery material systems.
文摘In 2014, 50 years following the introduction of density functional theory (DFT), a rigorous understanding of it was published [AIP Advances, 4, 127,104 (2014)]. This understanding includes two features that complete the theory in practice, inasmuch as they are necessary for its correct application in electronic structure calculations;this understanding elucidates what appears to have been the crucial misunderstanding for 50 years, namely, the confusion between a stationary solution, attainable with most basis sets, following self-consistent iterations, with the ground state solution. The latter is obtained by a calculation that employs the well-defined optimal basis set for the system. The aim of this work is to review the above understanding and to extend it to the relativistic generalization of density functional theory by Rajagopal and Callaway [Phys. Rev. B7, 1912 (1973)]. This extension straightforwardly follows similar steps taken in the non-relativistic case, with the four-component current density, in the former, replacing the electronic charge density, in the latter. This new understanding, which completes relativistic DFT in practice, is expected to be needed for the study of heavy atoms and of materials (from molecules to solids) containing them—as is the case for some high temperature superconductors.
基金National Natural Science Foundation of China(Nos.21978079,and 21878078).
文摘It is important to study the solvent effect on keto-enol tautomerism that has applications in many areas of chemical engineering.In this work,we use a multiscale reaction density functional theory(Rx DFT)to study the keto-enol tautomerism and isomerization of pyruvic acid.The results show that both effects of solvation and water assistance could reduce the reaction barriers.The water molecule participates the reaction as a catalyst to accept/give the protons with forming a hexagonal ring in the transition state.As a result of this temporary and intermediate hexagonal ring,the solute configuration undergoes a small variation during the reaction,giving a diminished contribution to the intrinsic reaction free energy.The solvent distribution shows a local ordering behavior near the solute that also reduces the contribution of solvation effect to the reaction barrier.Water assistance plays a major role in both pre-reaction and postreaction process.In terms of the driving force for the reaction,the effects of both solvation and water assistance are important.
文摘In this paper, we perform the density functional theory(DFT)-based calculations by the first-principles pseudopotential method to investigate the physical properties of the newly discovered superconductor LaRu_2As_2 for the first time.The optimized structural parameters are in good agreement with the experimental results. The calculated independent elastic constants ensure the mechanical stability of the compound. The calculated Cauchy pressure, Pugh's ratio as well as Poisson's ratio indicate that LaRu_2As_2 should behave as a ductile material. Due to low Debye temperature, LaRu_2As_2 may be used as a thermal barrier coating(TBC) material. The new compound should exhibit metallic nature as its valence bands overlap considerably with the conduction bands. LaRu_2As_2 is expected to be a soft material and easily machinable because of its low hardness value of 6.8 GPa. The multi-band nature is observed in the calculated Fermi surface. A highly anisotropic combination of ionic, covalent and metallic interactions is expected to be in accordance with charge density calculation.
基金Project supported by the National Natural Science Foundation of China(Grant No.11202178)
文摘Based on the density functional calculations, the structural and electronic properties of the WS_2/graphene heterojunction under different strains are investigated. The calculated results show that unlike the free mono-layer WS_2, the monolayer WS_2 in the equilibrium WS_2/graphene heterojunctionis characterized by indirect band gap due to the weak van der Waals interaction. The height of the schottky barrier for the WS_2/graphene heterojunction is 0.13 eV, which is lower than the conventional metal/MoS_2 contact. Moreover, the band properties and height of schottky barrier for WS_2/graphene heterojunction can be tuned by strain. It is found that the height of the schottky barrier can be tuned to be near zero under an in-plane compressive strain, and the band gap of the WS_2 in the heterojunction is turned into a direct band gap from the indirect band gap with the increasing schottky barrier height under an in-plane tensile strain. Our calculation results may provide a potential guidance for designing and fabricating the WS_(2^-)based field effect transistors.
基金Project supported by the Science Fund from the Ministry of National Science and Technology(NST),Bangladesh。
文摘We perform the first-principles investigations of the structural,elastic,electronic,and optical properties of SrBO3(B=Cr,Fe)perovskites under pressure based on density functional theory(DFT).This is the first detailed pressure-dependent study of the physical properties for these compounds.The calculated structural parameters are consistent with the existing experimental results and slightly decrease with the application of pressure.The mechanical properties are discussed in detail and reveal that the SrCrO3 is harder than SrFeO3.Without pressure,these compounds behave like half-metals,confirmed by their band structure and density of states.Although the SrCrO3 retains its half-metallic nature under pressure,SrFeO3 becomes metallic for both up-spin and down-spin configuration.Both charge density and bond overlap population reveal the covalent nature of Cr–O bond and Fe–O bond in the studied compounds.The optical properties of SrBO3,also discussed for the first time,reveal some interesting results.
基金This work was supported by the China Postdoctoral Science Foundation (No. 2003033486)
文摘Optimized calculation of dibenzofuran (DF) and 135 polychlorinated diben- zofurans (PCDFs ) was carried out at the B3LYP/6-31G* level in GAUSSIAN 98 program. Based on the theoretical linear solvation energy relationship (TLSER) model, the obtained structural parameters were taken as theoretical descriptors to establish the novel quantitative structure- property relationship (QSPR) model for predicting n-octanol/water partition coefficients (lgKow) of PCDFs. The new model of lgKow achieved in this work contains three variables: energy of the highest occupied molecular orbital (EHOMO), the most negative atomic partial charge (q-) and average molecular polarizability (α), of which R2 = 0.9011 and SD = 0.17 with larger t values. In addition, the variation inflation factors (VIF) of variables in the present model are all less than 5.5, suggesting high accuracy of the lgKow model. And the results of cross-validation test (q2 = 0.8688) and method validation also show this model exhibits optimum stability and better predictive power than semi-empirical method. At the same time, it is found that the aqueous solubility (-lgSw) has high relative correlation with constant volume molar heat capacity (CV0), of which R2 = 0.9777 and SD = 0.22. Moreover, lgKow and -lgSw values of all PCDF congeners were predicted respectively.
基金supported by the National Natural Science Foundation of China(21203027,21373048,21371034)Scientific Development Fund of Fuzhou University(2012-XQ-11)
文摘We applied periodic density-functional theory to investigate the adsorption of HCN on x Ni@Pt(111) bimetallic surfaces(x = 1~4). The results have been compared with those obtained on pure Ni(111) and Pt(111) surfaces. For all bimetallic surfaces,HCN is preferentially tilted with the CN bond parallel to the surface,and adsorption energies increase with an increasing number of layer Ni atoms on the surface. The adsorption energies of HCN on all bimetallic surfaces are larger than that on the Pt(111) surface,whereas the adsorption energies of HCN on 3Ni@Pt(111) and 4Ni@Pt(111) are larger than that on the Ni(111) surface,indicating that the introduction of Ni to the Pt catalyst could increase the activity of bimetallic catalyst in the hydrogenation reaction for nitriles. Larger adsorption energy of HCN leads to a longer C–N bond length and a smaller CN vibrational frequency. The analysis of Bader charge and vibrational frequencies showed obvious weakening of the adsorbed C–N bond and an indication of sp2 hybridization of both carbon and nitrogen atoms.