Recent advances in hydrocarbon exploration have been made in the Member Deng-2 marginal microbial mound-bank complex reservoirs of the Dengying Formation in the western Sichuan Basin, SW China,where the depositional p...Recent advances in hydrocarbon exploration have been made in the Member Deng-2 marginal microbial mound-bank complex reservoirs of the Dengying Formation in the western Sichuan Basin, SW China,where the depositional process is regarded confusing. The microfacies, construction types, and depositional model of the Member Deng-2 marginal microbial mound-bank complex have been investigated using unmanned aerial vehicle photography, outcrop section investigation, thin section identification,and seismic reflections in the southwestern Sichuan Basin. The microbialite lithologic textures in this region include thrombolite, dendrolite, stromatolite, fenestral stromatolite, spongiostromata stone,oncolite, aggregated grainstone, and botryoidal grapestone. Based on the comprehensive analysis of“depositional fabrics-lithology-microfacies”, an association between a fore mound, mound framework,and back mound subfacies has been proposed based on water depth, current direction, energy level and lithologic assemblages. The microfacies of the mound base, mound core, mound flank, mound cap, and mound flat could be recognized among the mound framework subfacies. Two construction types of marginal microbial mound-bank complex have been determined based on deposition location, mound scale, migration direction, and sedimentary facies association. Type Jinkouhe microbial mound constructions(TJMMCs) develop along the windward margin owing to their proximity to the seaward subfacies fore mound, with a northeastwardly migrated microbial mound on top of the mud mound,exhibiting the characteristics of large-sized mounds and small-sized banks in the surrounding area. Type E'bian microbial mound constructions(TEMMCs) primarily occur on the leeward margin, resulting from the presence of onshore back mound subfacies, with the smaller southwestward migrated microbial mounds existing on a thicker microbial flat. The platform margin microbial mound depositional model can be correlated with certain lateral comparison profile and seismic reflection structures in the 2D seismic section, which can provide references for future worldwide exploration. Microbial mounds with larger buildups and thicker vertical reservoirs are typically targeted on the windward margin, while small-sized microbial mounds and flats with better lateral connections are typically focused on the leeward margin.展开更多
We studied the sedimentary characteristics of a Paleocene-Eocene salt lake in the Jiangling Depression through field core observation,thin section identification,scanning electron microscopy,and X-ray diffraction anal...We studied the sedimentary characteristics of a Paleocene-Eocene salt lake in the Jiangling Depression through field core observation,thin section identification,scanning electron microscopy,and X-ray diffraction analysis.On the basis of sedimentary characteristics we have summarized the petrological and mineralogical characteristics of the salt lake and proposed 9 types of grade IV salt rhythms.The deposition shows a desalting to salting order of halite-argillaceous-mudstone-mud dolostonemud anhydrock-glauberite-halite.The relationship among grade IV rhythms,water salinity and climate fluctuations was analyzed.Based on the analysis of the relationship between boron content and mudstone color and by combining the mineralogy and sedimentary environment characteristics,we propose that the early and late Paleocene Shashi Formation in the Jiangling Depression was a paleolacustrine depositional environment with a high salt content,which is a representation of the shallow water salt lake depositional model.The middle Paleocene Shashi Formation and the early Eocene Xingouzui Formation were salt and brackish sedimentary environments with low salt content in a deep paleolake,which represents a deep salt lake depositional model.展开更多
Shales in deep lake basins have become the main focus of continental shale oil and gas exploration.In order to highlight the sedimentary dynamics of mud deposition in deep lake basins,a combination of core observation...Shales in deep lake basins have become the main focus of continental shale oil and gas exploration.In order to highlight the sedimentary dynamics of mud deposition in deep lake basins,a combination of core observation,thin section examination,X-ray diffraction,and QEMSCAN(quantitative evaluation of minerals by scanning electron microscopy)was used to analyze the depositional characteristics of mudrocks in the Chang-7 Member from the Yanchang Formation(Upper Triassic)in Ordos Basin,and to establish a depositional model for mud accumulation in deep lake basins.This study recognizes four mudrock lithofacies in the Chang-7 Member:(1)the laminated silt-bearing mudstone,which generally develops a binary composition of“silt-clay”or a ternary composition of“silt-clay-organic matter”;(2)the graded mudstone,mainly composed of dark gray and gray-black mudstone sandwiched by silt-bearing mudstone;(3)the massive mudstone,internally showing a uniform distribution of quartz,clay,and carbonate minerals,with also a small amount of organic detritus;and(4)the laminated shale,which is generally composed of clay laminae,and organic laminae of the former two.Sediment supply,topographic slope,and flood intensity combine to control the evolution of gravity flows and the transport and deposition of the mudrock in the Chang-7 Member.The influence of orogeny provides terrain gradient,water depth,abundant sediments at source areas,and triggering mechanism for the formation of gravity flows.Floods triggered by wetting events provide the impetus for sediment transport.Mud deposition in the Chang-7 Member was mainly related to the transport and sedimentation of mud by hyperpycnal flows and rapid sedimentation by buoyant plume flocculation.A comprehensive evolutionary model for shale accumulation in the deep lake basin is established by integrating various triggering mechanisms and mud transport sedimentary processes.展开更多
The objective of the work is to determine the influence of the PLA melting temperature during 3D printing on the dimensional accuracy of the model parts. Two modular drilling devices were also made using PLA model par...The objective of the work is to determine the influence of the PLA melting temperature during 3D printing on the dimensional accuracy of the model parts. Two modular drilling devices were also made using PLA model parts. The model parts were 3D printed using FDM technology and the ZMorph 2.0 hybrid 3D printer. The accuracy of 3D printing of the model part influences the realization of modular devices. In recent years, technology has evolved a lot, and the need to have the most efficient manufacturing equipment has increased. This is the reason for the development of 3D printers using FDM technology for plastic parts. The software used by these 3D printers used in FDM technology is very sophisticated, as they allow the manufacture of very precise 3D prototypes, identical to the designed 3D model, through modern additive manufacturing techniques. The quality and mechanical strength of the prototypes obtained using 3D printers is very good. The materials used by the 3D printers manufactured by FDM are cheap and accessible. These 3D printers are used to make three-dimensional objects (gears, flanges, bearings, covers, casings, mechanisms, figurines, interior and exterior design elements, architectural models, medical models).展开更多
The Changxing （长兴） Formation has two sequences （sql and sq2） in the Panlongdong （盘龙洞） Section, Xuanhan （宣汉）, northeastern Sichuan （四川）. It belongs to the platform edge facies belt, rich in reefs and...The Changxing （长兴） Formation has two sequences （sql and sq2） in the Panlongdong （盘龙洞） Section, Xuanhan （宣汉）, northeastern Sichuan （四川）. It belongs to the platform edge facies belt, rich in reefs and banks, which were developed in the highstand system tract （HST） of sql and sq2, respectively. During third-order relative sea level dropping, the platform edge reef bank were mainly developed in the overall progradation parasequence sets. The platform edge reefs were developed in three phases, while platform edge banks in two phases. Outcrop observation and microscopic identification for platform egde reefs and banks in the section show that the three-phase-reefs are all composed of reef base and reef core, with string of tube sponge as the major reef-building organisms and fiber sponge, hydrazoan and bryozoans as the minor, while the reef-attached organisms mainly being fo- raminifera, brachiopod, echinoderm and ostracod. The first-phase-reef rock type is baffling reefs, the second phase baffling reefs and framework reefs assembles, the third phase framework reefs. Typically, the second phase reefs were developed with the maximum sedimentary scale and thickness, with the most abundant reef-building organisms and reef-attached organisms, showing best physical properties for reservoirs. The platform edge banks mainly consists of gravel debris and ooide grains, mostly dolomized. The dolomitizition in the second phase was relatively intense, favoring good reservoirs.展开更多
Based on the element geochemistry and biomarkers of the oil shale from the Chang 7 sub-unit in the southern Ordos Basin,the depositional conditions and organic source of the oil shale are discussed.Biomarkers analyses...Based on the element geochemistry and biomarkers of the oil shale from the Chang 7 sub-unit in the southern Ordos Basin,the depositional conditions and organic source of the oil shale are discussed.Biomarkers analyses show that the oil shale has a homologous organic matter source,with a mix of plankton and advanced plants.U/Th and V/Ni ratios suggest that the redox condition is dominated by a reducing condition,and the degree of anoxia in the Tongchuan area is higher than that of the Xunyi area.Sr/Ba ratios illustrate that the oil shale is deposited in fresh water and the paleosalinity in the Tongchuan area is slightly higher.Fe/Ti ratios imply that the Tongchuan area underwent obvious hydrothermal fluid activities.Sr/Cu ratios show warm and humid paleoclimate in both areas.As assessed by(La/Yb)NASC,the deposition rate in the Tongchuan area is relatively lower.Fe/Co and Th/U ratios suggest that the paleo-water-depth in the Tongchuan area is deeper.The source rock could have the advance plants source,which must have close relationship with the Qinling orogeny.Comparing the paleoenvironment,the Tongchuan area has better depositional conditions,and is the key oil shale exploration area in the southern Ordos Basin.展开更多
This paper studies the lithofacies,sedimentary facies,depositional models and reservoir architecture of the rudist-bearing Sar-3 zone of Cretaceous Sarvak in the Southwest of Iran by utilizing coring,thin section,XRD ...This paper studies the lithofacies,sedimentary facies,depositional models and reservoir architecture of the rudist-bearing Sar-3 zone of Cretaceous Sarvak in the Southwest of Iran by utilizing coring,thin section,XRD data of five coring wells and 3D seismic data.Research results include the following:According to lithofacies features and their association,the rudist-mound and tidal flat are the main microfacies in the Sar-3 depositional time.By investigating the regional tectonic setting and seismic interpretation,a depositional model was built for the Sar-3 zone,which highlights four key points:1)The distribution of the rudist-buildup is controlled by the paleo-high.2)The build-up outside of the wide colonize stage but reached the wave-base level in a short time by regression and formation uplift,and was destroyed by the high energy current,then forming the moundy allochthonous deposition after being dispersed and redeposited.3)The tidal flat develops widely in the upper Sar-3,and the deposition thickness depends on the paleo-structure.The tidal channel develops in the valley and fringe of the Paleo-structure.4)The exposure within the leaching effect by the meteoric water of the top of Sar-3 is the main controlling factor of the reservoir vertical architecture.The Sar-3 zone featured as the dualistic architecture consists of two regions:the lower is the rudist reef limestone reservoir and the upper is the tidal condense limestone interlayer.The thickness of each is controlled by the paleo-structure.The Paleo-high zone is the preferential development zone.Based on reservoir characteristics of the different zones,a targeted development strategy has been proposed.Keeping the trajectory in the middle of the oillayer in the paleo-high,and in the paleo-low,make the trajectory crossing the oil-zone and then keep it in the lower.展开更多
In the South Yellow Sea Basin,Mesozoic–Paleozoic marine strata are generally well developed with large thickness,and no substantial breakthroughs have been made in hydrocarbon exploration.Through research,it is belie...In the South Yellow Sea Basin,Mesozoic–Paleozoic marine strata are generally well developed with large thickness,and no substantial breakthroughs have been made in hydrocarbon exploration.Through research,it is believed that the Upper Permian–Lower Triassic can be regarded as a long-term base-level cycle.Based on drilling data,characteristics of the lithology–electric property combination cyclicity,and the special lithology,the long-term base-level cycle was divided into five medium-term base-level cycles(MC1–MC5).On this basis,the Permian–Triassic sedimentary systems and their filling model were analyzed in accordance with the change of base-level cycle and transition of sedimentary environment,as well as characteristics of the drilling sedimentary facies and seismic facies.The results show that there were six sedimentary systems(fluvial,delta,tidal flat,open platform,restricted platform,and continental shelf)developed in the Upper Permian–Lower Triassic,the sedimentary systems were distributed such that the water was deep in the northwest and shallow in the southeast,and there were two base-level cycle filling models(a relatively stable tidal flat facies and a rapidly transgressive continental shelf facies to stable platform facies)developed in the Upper Permian–Lower Triassic.These models can provide a basis for evaluation of the Mesozoic–Paleozoic hydrocarbon geology in the South Yellow Sea Basin.展开更多
Ideal tissue engineering scaffolds need interconnected pores and high porosity to enable cell survival,migration,proliferation,and differentiation.However,obtaining a high-resolution structure is difficult with tradit...Ideal tissue engineering scaffolds need interconnected pores and high porosity to enable cell survival,migration,proliferation,and differentiation.However,obtaining a high-resolution structure is difficult with traditional one-temperature control fused deposition modeling(FDM).In this study,we propose a dual-temperature control method to improve printability.A numerical model is developed in which the viscosity is a function of temperature and shear rate to study the influence of two different temperature control modes.Quantitative tests are used to assess filament formation and shape fidelity,including one-dimensional filament printing,deposition at corners,fusion,and collapse.By using dual-temperature control,the width of the deposited poly(ε-caprolactone)filament is reduced to 50μm.The comparative results of both the experimental method and numerical simulation suggest that the dual-temperature control FDM can manufacture spatially arranged constructs and presents a promising application in tissue engineering。展开更多
The urgent need to develop customized functional products only possible by 3D printing had realized when faced with the unavailability of medical devices like surgical instruments during the coronavirus-19 disease and...The urgent need to develop customized functional products only possible by 3D printing had realized when faced with the unavailability of medical devices like surgical instruments during the coronavirus-19 disease and the ondemand necessity to perform surgery during space missions.Biopolymers have recently been the most appropriate option for fabricating surgical instruments via 3D printing in terms of cheaper and faster processing.Among all 3D printing techniques,fused deposition modelling(FDM)is a low-cost and more rapid printing technique.This article proposes the fabrication of surgical instruments,namely,forceps and hemostat using the fused deposition modeling(FDM)process.Excellent mechanical properties are the only indicator to judge the quality of the functional parts.The mechanical properties of FDM-processed parts depend on various process parameters.These parameters are layer height,infill pattern,top/bottom pattern,number of top/bottom layers,infill density,flow,number of shells,printing temperature,build plate temperature,printing speed,and fan speed.Tensile strength and modulus of elasticity are chosen as evaluation indexes to ascertain the mechanical properties of polylactic acid(PLA)parts printed by FDM.The experiments have performed through Taguchi’s L27orthogonal array(OA).Variance analysis(ANOVA)ascertains the significance of the process parameters and their percent contributions to the evaluation indexes.Finally,as a multiobjective optimization technique,grey relational analysis(GRA)obtains an optimal set of FDM process parameters to fabricate the best parts with comprehensive mechanical properties.Scanning electron microscopy(SEM)examines the types of defects and strong bonding between rasters.The proposed research ensures the successful fabrication of functional surgical tools with substantial ultimate tensile strength(42.6 MPa)and modulus of elasticity(3274 MPa).展开更多
Naturalfibre as a reinforcing agent has been widely used in many industrial applications.Nevertheless,several factors need to be considered,such as the size and weight percentage of thefibre used in binding.Using fused ...Naturalfibre as a reinforcing agent has been widely used in many industrial applications.Nevertheless,several factors need to be considered,such as the size and weight percentage of thefibre used in binding.Using fused deposition modelling(FDM),this factor was investigated by varying the size of naturalfibre as the responding variable with afixed weight percentage of kenaffibre.The process of modifying the naturalfibre in terms of size might increase the dispersion of kenaffibre in the polymer matrix and increase the adhesion bonding between thefibre and matrix of composites,subsequently improving the interfacial bonding between these two phases.In this paper,the effect offibre size was evaluated by performing the mechanical test,Scanning Electron Micrograph(SEM)to observe the morphology of the composites,and also by surface analysis.The surface roughness was visualised using a 3D profilometer and thefigure was illustrated as colour shading in the image.The composite withfibre size≤100μm displayed better tensile andflexural strength,compared to other sizes.In conclusion,by reducing the size of thefibre,the composites could develop high strength performance for industrial applications.展开更多
Based on analyzing the influences of a slicing scheme on stair-stepping effect, supporting structure, efficiency and deformation, etc. , analytical hierarchical process （AHP） combining with fuzzy synthetic evaluatio...Based on analyzing the influences of a slicing scheme on stair-stepping effect, supporting structure, efficiency and deformation, etc. , analytical hierarchical process （AHP） combining with fuzzy synthetic evaluation is introduced to make decision in slicing schemes for a processing part. The application in determining the slicing scheme for a computer mouse during prototyping shows that the method increases the rationality during decision- making and improves quality and efficiency for the prototyping part.展开更多
Recent exploration results indicate that a significant exploration potential remains in the Dongying Depression of the Bohai Bay Basin and the undiscovered oil and gas are largely reservoired in subtle traps including...Recent exploration results indicate that a significant exploration potential remains in the Dongying Depression of the Bohai Bay Basin and the undiscovered oil and gas are largely reservoired in subtle traps including turbidite litholigcal traps of the Sha-3 Member. In order to effectively guide the exploration program targeting turbidites, this study will focus on the depositional models of the Sha-3 Member turbidites and oil/gas accumulation characteristics in these turbidites. Two corresponding relationships were found. One is that the East African Rift Valley provides a modern analog for the depositional systems in the Dongying Depression. The other is that the depositional models of line-sourced slope aprons, single point-source submarine fan and multiple source ramp turbidite, established for deep-sea turbidites, can be applied to interpret the depositional features of the turbidite fans of three different origins: slope turbidite aprons, lake floor turbidite fans and delta-fed turbidite fans in the Sha-3 Member. Updip sealing integrity is the key factor determining whether oil/gas accumulates or not in the slope aprons and lake floor fans. The factors controlling oil/gas migration and accumulation in the delta-fed turbidite fans are not very clear. Multiple factors rather than a single factor probably played significant roles in these processes.展开更多
In the last decade,3D printing,especially fused deposition modeling(FDM),has revolutionized manufacturing with intricate designs.Traditional 3-axis FDM printers face challenges with complex geometries,but 5-axis versi...In the last decade,3D printing,especially fused deposition modeling(FDM),has revolutionized manufacturing with intricate designs.Traditional 3-axis FDM printers face challenges with complex geometries,but 5-axis versions offer more design freedom.However,it requires specialized strategies.This research presents a model for 5-axis FDM printers using Bézier curves with an algorithm to enhance print quality.The result shows significant accuracy improvements,especially for curve-based tasks.In addition,this study deepens the understanding of 5-axis FDM technology,setting a solid basis for further research and potentially refining manufacturing methods.展开更多
By the aid of the international mining software SURPAC, a geologic database for a multi-metal mine was established, 3D models of the surface, geologic fault, ore body, cavity and the underground openings were built, a...By the aid of the international mining software SURPAC, a geologic database for a multi-metal mine was established, 3D models of the surface, geologic fault, ore body, cavity and the underground openings were built, and the volume of the cavity of the mine based on the cavity 3D model was calculated. In order to compute the reserves, a grade block model was built and each metal element grade was estimated using Ordinary Kriging. Then, the reserve of each metal element and every sublevel of the mine was worked out. Finally, the calculated result of each metal reserve to its actual prospecting reserve was compared, and the results show that they are all almost equal to each other. The absolute errors of Sn, Pb, and Zn reserves are only 1.45%, 1.59% and 1.62%, respectively. Obviously, the built models are reliable and the calculated results of reserves are correct. They can be used to assist the geologic and mining engineers of the mine to do research work of reserves estimation, mining design, plan making and so on.展开更多
Biodegradable polymers are highly attractive as potential alternatives to petroleum-based polymers in an attempt to achieve carbon neutrality whilst maintaining the mechanical properties of the structures.Among these ...Biodegradable polymers are highly attractive as potential alternatives to petroleum-based polymers in an attempt to achieve carbon neutrality whilst maintaining the mechanical properties of the structures.Among these polymers,polylactic acid(PLA)is particularly promising due to its good mechanical properties,biocompatibility and thermoplasticity.In this work,we aim to enhance the mechanical properties of PLA using mechanically-defibrated cellulose nanofibers(CNFs)that exhibit remarkable mechanical properties and biodegradability.We also employ fused deposition modeling(FDM),one of the three-dimensional printing methods for thermoplastic polymers,for the low-cost fabrication of the products.Mechanically-defibrated CNF-reinforced PLA matrix composites are fabricated by FDM.Their tensile properties are investigated in two printing directions(0°/90°and+45°/-45°).The discussion about the relationship between printing direction and tensile behavoir of mechanically-defibrated CNF-reinforced PLA matrix composite is the unique point of this study.We further discuss the microstructure and fracture surface of mechanically-defibrated CNF-reinforced PLA matrix composite by scanning electron microscope.展开更多
A novel fiber Bragg grating(FBG)sensor with three-dimensional(3D)fused deposition modeling(FDM)approach is proposed for effective stress measurement in soil mass.The three-diaphragm structure design is developed to me...A novel fiber Bragg grating(FBG)sensor with three-dimensional(3D)fused deposition modeling(FDM)approach is proposed for effective stress measurement in soil mass.The three-diaphragm structure design is developed to measure earth and water pressures simultaneously.The proposed transducer has advantages of small size,high sensitivity,low cost,immunity to electromagnetic interference and rapid prototyping.The working principle,design parameters,and manufacturing details are discussed.The proposed transducer was calibrated for earth and water pressures measurement by using weights and a specially designed pressure chamber,respectively.The calibration results showed that the wavelength of the transducer was proportional to the applied pressure.The sensitivity coefficients of the earth and water pressures were 12.633 nm/MPa and 6.282 nm/MPa,respectively.Repeated tests and error analysis demonstrated the excellent stability and accuracy of the earth and water pressure measurements.The performance of the proposed transducer was further verified by a model experimental test and numerical analysis,which indicated that the proposed transducer has great potential for practical applications.展开更多
Fused deposition modelling(FDM), a widely used rapid prototyping process, is a promising technique in manufacturing engineering. In this work, a method for characterizing elastic constants of FDM-fabricated materials ...Fused deposition modelling(FDM), a widely used rapid prototyping process, is a promising technique in manufacturing engineering. In this work, a method for characterizing elastic constants of FDM-fabricated materials is proposed. First of all, according to the manufacturing process of FDM, orthotropic constitutive model is used to describe the mechanical behavior. Then the virtual fields method(VFM) is applied to characterize all the mechanical parameters(Q, Q, Q, Q) using the full-field strain,which is measured by digital image correlation(DIC). Since the principal axis of the FDM-fabricated structure is sometimes unknown due to the complexity of the manufacturing process, a disk in diametrical compression is used as the load configuration so that the loading angle can be changed conveniently. To verify the feasibility of the proposed method, finite element method(FEM) simulation is conducted to obtain the strain field of the disk. The simulation results show that higher accuracy can be achieved when the loading angle is close to 30?. Finally, a disk fabricated by FDM was used for the experiment. By rotating the disk, several tests with different loading angles were conducted. To determine the position of the principal axis in each test, two groups of parameters(Q, Q, Q, Q) are calculated by two different groups of virtual fields. Then the corresponding loading angle can be determined by minimizing the deviation between two groups of the parameters. After that, the four constants(Q, Q, Q, Q) were determined from the test with an angle of 27?.展开更多
Although several research works in the literature have focused on studying the capabilities of additive manufacturing(AM) systems, few works have addressed the development of Design for Additive Manufacturing(DfAM) kn...Although several research works in the literature have focused on studying the capabilities of additive manufacturing(AM) systems, few works have addressed the development of Design for Additive Manufacturing(DfAM) knowledge,tools, rules, and methodologies, which has limited the penetration and impact of AM in industry. In this paper a comprehensive review of design and manufacturing strategies for Fused Deposition Modelling(FDM) is presented.Consequently, several DfAM strategies are proposed and analysed based on existing research works and the operation principles, materials, capabilities and limitations of the FDM process. These strategies have been divided into four main groups: geometry, quality, materials and sustainability. The implementation and practicality of the proposed DfAM is illustrated by three case studies. The new proposed DfAM strategies are intended to assist designers and manufacturers when making decisions to satisfy functional needs, while ensuring manufacturability in FDM systems.Moreover, many of these strategies can be applied or extended to other AM processes besides FDM.展开更多
Fused deposition modeling(FDM) is one of the latest rapid prototyping techniques in which parts can be manufactured at a fast pace and are manufactured with a high accuracy. This research work is carried out to study ...Fused deposition modeling(FDM) is one of the latest rapid prototyping techniques in which parts can be manufactured at a fast pace and are manufactured with a high accuracy. This research work is carried out to study the friction and wear behavior of parts made of newly developed Nylon6-Fe composite material by FDM. This work also involves the comparison of the friction and wear characteristics of the Nylon6-Fe composite with the existing acrylonitrile butadiene styrene(ABS) filament of the FDM machine. This Is carried out on the pin on disk setup by varying the load(5, 10, 15 and 20 N) and speed(200 and 300 r/min). It is concluded that the newly developed composite is highly wear resistant and can be used in industrial applications where wear resistance is of paramount importance. Morphology of the surface in contact with the Nylon6-Fe composite and ABS is also carried out.展开更多
基金jointly funded by projects supported by the National Natural Science Foundation of China(Grant No.41872150)the Joint Funds of the National Natural Science Foundation of China(Grant No.U19B6003)Major Scientific and Technological Projects of CNPC during the 13th five-year plan(No.2019A-02-10)。
文摘Recent advances in hydrocarbon exploration have been made in the Member Deng-2 marginal microbial mound-bank complex reservoirs of the Dengying Formation in the western Sichuan Basin, SW China,where the depositional process is regarded confusing. The microfacies, construction types, and depositional model of the Member Deng-2 marginal microbial mound-bank complex have been investigated using unmanned aerial vehicle photography, outcrop section investigation, thin section identification,and seismic reflections in the southwestern Sichuan Basin. The microbialite lithologic textures in this region include thrombolite, dendrolite, stromatolite, fenestral stromatolite, spongiostromata stone,oncolite, aggregated grainstone, and botryoidal grapestone. Based on the comprehensive analysis of“depositional fabrics-lithology-microfacies”, an association between a fore mound, mound framework,and back mound subfacies has been proposed based on water depth, current direction, energy level and lithologic assemblages. The microfacies of the mound base, mound core, mound flank, mound cap, and mound flat could be recognized among the mound framework subfacies. Two construction types of marginal microbial mound-bank complex have been determined based on deposition location, mound scale, migration direction, and sedimentary facies association. Type Jinkouhe microbial mound constructions(TJMMCs) develop along the windward margin owing to their proximity to the seaward subfacies fore mound, with a northeastwardly migrated microbial mound on top of the mud mound,exhibiting the characteristics of large-sized mounds and small-sized banks in the surrounding area. Type E'bian microbial mound constructions(TEMMCs) primarily occur on the leeward margin, resulting from the presence of onshore back mound subfacies, with the smaller southwestward migrated microbial mounds existing on a thicker microbial flat. The platform margin microbial mound depositional model can be correlated with certain lateral comparison profile and seismic reflection structures in the 2D seismic section, which can provide references for future worldwide exploration. Microbial mounds with larger buildups and thicker vertical reservoirs are typically targeted on the windward margin, while small-sized microbial mounds and flats with better lateral connections are typically focused on the leeward margin.
基金Supported by the National Basic Research Program of China(973 Program)(No.20011CB403007)the National Natural Science Foundation for Young Scientists of China(Nos.41502089,41202059)+1 种基金the Central Public Welfare Scientific Research Basic Scientific Research Business Expenses(No.K1415)the Geological Survey(No.1212010011808)
文摘We studied the sedimentary characteristics of a Paleocene-Eocene salt lake in the Jiangling Depression through field core observation,thin section identification,scanning electron microscopy,and X-ray diffraction analysis.On the basis of sedimentary characteristics we have summarized the petrological and mineralogical characteristics of the salt lake and proposed 9 types of grade IV salt rhythms.The deposition shows a desalting to salting order of halite-argillaceous-mudstone-mud dolostonemud anhydrock-glauberite-halite.The relationship among grade IV rhythms,water salinity and climate fluctuations was analyzed.Based on the analysis of the relationship between boron content and mudstone color and by combining the mineralogy and sedimentary environment characteristics,we propose that the early and late Paleocene Shashi Formation in the Jiangling Depression was a paleolacustrine depositional environment with a high salt content,which is a representation of the shallow water salt lake depositional model.The middle Paleocene Shashi Formation and the early Eocene Xingouzui Formation were salt and brackish sedimentary environments with low salt content in a deep paleolake,which represents a deep salt lake depositional model.
基金co-funded by the National Natural Science Foundation of China (Grant No.42372141and Grant No.42072126)Open Fund (DGERA20241002)of Key Laboratory of Deep-time Geography and Environment Reconstruction and Applications of Ministry of Natural Resources,Chengdu University of Technology。
文摘Shales in deep lake basins have become the main focus of continental shale oil and gas exploration.In order to highlight the sedimentary dynamics of mud deposition in deep lake basins,a combination of core observation,thin section examination,X-ray diffraction,and QEMSCAN(quantitative evaluation of minerals by scanning electron microscopy)was used to analyze the depositional characteristics of mudrocks in the Chang-7 Member from the Yanchang Formation(Upper Triassic)in Ordos Basin,and to establish a depositional model for mud accumulation in deep lake basins.This study recognizes four mudrock lithofacies in the Chang-7 Member:(1)the laminated silt-bearing mudstone,which generally develops a binary composition of“silt-clay”or a ternary composition of“silt-clay-organic matter”;(2)the graded mudstone,mainly composed of dark gray and gray-black mudstone sandwiched by silt-bearing mudstone;(3)the massive mudstone,internally showing a uniform distribution of quartz,clay,and carbonate minerals,with also a small amount of organic detritus;and(4)the laminated shale,which is generally composed of clay laminae,and organic laminae of the former two.Sediment supply,topographic slope,and flood intensity combine to control the evolution of gravity flows and the transport and deposition of the mudrock in the Chang-7 Member.The influence of orogeny provides terrain gradient,water depth,abundant sediments at source areas,and triggering mechanism for the formation of gravity flows.Floods triggered by wetting events provide the impetus for sediment transport.Mud deposition in the Chang-7 Member was mainly related to the transport and sedimentation of mud by hyperpycnal flows and rapid sedimentation by buoyant plume flocculation.A comprehensive evolutionary model for shale accumulation in the deep lake basin is established by integrating various triggering mechanisms and mud transport sedimentary processes.
文摘The objective of the work is to determine the influence of the PLA melting temperature during 3D printing on the dimensional accuracy of the model parts. Two modular drilling devices were also made using PLA model parts. The model parts were 3D printed using FDM technology and the ZMorph 2.0 hybrid 3D printer. The accuracy of 3D printing of the model part influences the realization of modular devices. In recent years, technology has evolved a lot, and the need to have the most efficient manufacturing equipment has increased. This is the reason for the development of 3D printers using FDM technology for plastic parts. The software used by these 3D printers used in FDM technology is very sophisticated, as they allow the manufacture of very precise 3D prototypes, identical to the designed 3D model, through modern additive manufacturing techniques. The quality and mechanical strength of the prototypes obtained using 3D printers is very good. The materials used by the 3D printers manufactured by FDM are cheap and accessible. These 3D printers are used to make three-dimensional objects (gears, flanges, bearings, covers, casings, mechanisms, figurines, interior and exterior design elements, architectural models, medical models).
基金supported by the National Major Science and Technology Project of China (No. 2011ZX05007-002)
文摘The Changxing （长兴） Formation has two sequences （sql and sq2） in the Panlongdong （盘龙洞） Section, Xuanhan （宣汉）, northeastern Sichuan （四川）. It belongs to the platform edge facies belt, rich in reefs and banks, which were developed in the highstand system tract （HST） of sql and sq2, respectively. During third-order relative sea level dropping, the platform edge reef bank were mainly developed in the overall progradation parasequence sets. The platform edge reefs were developed in three phases, while platform edge banks in two phases. Outcrop observation and microscopic identification for platform egde reefs and banks in the section show that the three-phase-reefs are all composed of reef base and reef core, with string of tube sponge as the major reef-building organisms and fiber sponge, hydrazoan and bryozoans as the minor, while the reef-attached organisms mainly being fo- raminifera, brachiopod, echinoderm and ostracod. The first-phase-reef rock type is baffling reefs, the second phase baffling reefs and framework reefs assembles, the third phase framework reefs. Typically, the second phase reefs were developed with the maximum sedimentary scale and thickness, with the most abundant reef-building organisms and reef-attached organisms, showing best physical properties for reservoirs. The platform edge banks mainly consists of gravel debris and ooide grains, mostly dolomized. The dolomitizition in the second phase was relatively intense, favoring good reservoirs.
基金Projects(41173055,41772118)supported by the National Natural Science Foundation of China
文摘Based on the element geochemistry and biomarkers of the oil shale from the Chang 7 sub-unit in the southern Ordos Basin,the depositional conditions and organic source of the oil shale are discussed.Biomarkers analyses show that the oil shale has a homologous organic matter source,with a mix of plankton and advanced plants.U/Th and V/Ni ratios suggest that the redox condition is dominated by a reducing condition,and the degree of anoxia in the Tongchuan area is higher than that of the Xunyi area.Sr/Ba ratios illustrate that the oil shale is deposited in fresh water and the paleosalinity in the Tongchuan area is slightly higher.Fe/Ti ratios imply that the Tongchuan area underwent obvious hydrothermal fluid activities.Sr/Cu ratios show warm and humid paleoclimate in both areas.As assessed by(La/Yb)NASC,the deposition rate in the Tongchuan area is relatively lower.Fe/Co and Th/U ratios suggest that the paleo-water-depth in the Tongchuan area is deeper.The source rock could have the advance plants source,which must have close relationship with the Qinling orogeny.Comparing the paleoenvironment,the Tongchuan area has better depositional conditions,and is the key oil shale exploration area in the southern Ordos Basin.
文摘This paper studies the lithofacies,sedimentary facies,depositional models and reservoir architecture of the rudist-bearing Sar-3 zone of Cretaceous Sarvak in the Southwest of Iran by utilizing coring,thin section,XRD data of five coring wells and 3D seismic data.Research results include the following:According to lithofacies features and their association,the rudist-mound and tidal flat are the main microfacies in the Sar-3 depositional time.By investigating the regional tectonic setting and seismic interpretation,a depositional model was built for the Sar-3 zone,which highlights four key points:1)The distribution of the rudist-buildup is controlled by the paleo-high.2)The build-up outside of the wide colonize stage but reached the wave-base level in a short time by regression and formation uplift,and was destroyed by the high energy current,then forming the moundy allochthonous deposition after being dispersed and redeposited.3)The tidal flat develops widely in the upper Sar-3,and the deposition thickness depends on the paleo-structure.The tidal channel develops in the valley and fringe of the Paleo-structure.4)The exposure within the leaching effect by the meteoric water of the top of Sar-3 is the main controlling factor of the reservoir vertical architecture.The Sar-3 zone featured as the dualistic architecture consists of two regions:the lower is the rudist reef limestone reservoir and the upper is the tidal condense limestone interlayer.The thickness of each is controlled by the paleo-structure.The Paleo-high zone is the preferential development zone.Based on reservoir characteristics of the different zones,a targeted development strategy has been proposed.Keeping the trajectory in the middle of the oillayer in the paleo-high,and in the paleo-low,make the trajectory crossing the oil-zone and then keep it in the lower.
基金Projects(41506080,41702162)supported by the National Natural Science Foundation of ChinaProjects(DD20160152,DD20160147,GZH200800503)supported by China Geological Survey+1 种基金Projects(XQ-2005-01,2009GYXQ10)supported by China Ministry of Land and ResourcesProject(201602004)supported by the Postdoctoral Innovation Foundation of Shandong Province,China
文摘In the South Yellow Sea Basin,Mesozoic–Paleozoic marine strata are generally well developed with large thickness,and no substantial breakthroughs have been made in hydrocarbon exploration.Through research,it is believed that the Upper Permian–Lower Triassic can be regarded as a long-term base-level cycle.Based on drilling data,characteristics of the lithology–electric property combination cyclicity,and the special lithology,the long-term base-level cycle was divided into five medium-term base-level cycles(MC1–MC5).On this basis,the Permian–Triassic sedimentary systems and their filling model were analyzed in accordance with the change of base-level cycle and transition of sedimentary environment,as well as characteristics of the drilling sedimentary facies and seismic facies.The results show that there were six sedimentary systems(fluvial,delta,tidal flat,open platform,restricted platform,and continental shelf)developed in the Upper Permian–Lower Triassic,the sedimentary systems were distributed such that the water was deep in the northwest and shallow in the southeast,and there were two base-level cycle filling models(a relatively stable tidal flat facies and a rapidly transgressive continental shelf facies to stable platform facies)developed in the Upper Permian–Lower Triassic.These models can provide a basis for evaluation of the Mesozoic–Paleozoic hydrocarbon geology in the South Yellow Sea Basin.
基金The authors gratefully acknowledge the support provided by the National Natural Science Foundation of China(Nos.52250006 and 52075482)the Starry Night Science Fund of Zhejiang University Shanghai Institute for Advanced Study(No.SNZJU-SIAS-004).
文摘Ideal tissue engineering scaffolds need interconnected pores and high porosity to enable cell survival,migration,proliferation,and differentiation.However,obtaining a high-resolution structure is difficult with traditional one-temperature control fused deposition modeling(FDM).In this study,we propose a dual-temperature control method to improve printability.A numerical model is developed in which the viscosity is a function of temperature and shear rate to study the influence of two different temperature control modes.Quantitative tests are used to assess filament formation and shape fidelity,including one-dimensional filament printing,deposition at corners,fusion,and collapse.By using dual-temperature control,the width of the deposited poly(ε-caprolactone)filament is reduced to 50μm.The comparative results of both the experimental method and numerical simulation suggest that the dual-temperature control FDM can manufacture spatially arranged constructs and presents a promising application in tissue engineering。
文摘The urgent need to develop customized functional products only possible by 3D printing had realized when faced with the unavailability of medical devices like surgical instruments during the coronavirus-19 disease and the ondemand necessity to perform surgery during space missions.Biopolymers have recently been the most appropriate option for fabricating surgical instruments via 3D printing in terms of cheaper and faster processing.Among all 3D printing techniques,fused deposition modelling(FDM)is a low-cost and more rapid printing technique.This article proposes the fabrication of surgical instruments,namely,forceps and hemostat using the fused deposition modeling(FDM)process.Excellent mechanical properties are the only indicator to judge the quality of the functional parts.The mechanical properties of FDM-processed parts depend on various process parameters.These parameters are layer height,infill pattern,top/bottom pattern,number of top/bottom layers,infill density,flow,number of shells,printing temperature,build plate temperature,printing speed,and fan speed.Tensile strength and modulus of elasticity are chosen as evaluation indexes to ascertain the mechanical properties of polylactic acid(PLA)parts printed by FDM.The experiments have performed through Taguchi’s L27orthogonal array(OA).Variance analysis(ANOVA)ascertains the significance of the process parameters and their percent contributions to the evaluation indexes.Finally,as a multiobjective optimization technique,grey relational analysis(GRA)obtains an optimal set of FDM process parameters to fabricate the best parts with comprehensive mechanical properties.Scanning electron microscopy(SEM)examines the types of defects and strong bonding between rasters.The proposed research ensures the successful fabrication of functional surgical tools with substantial ultimate tensile strength(42.6 MPa)and modulus of elasticity(3274 MPa).
基金The result was obtained through the financial support of the Ministry of Education Malaysia under Grant Number RACER/2019/FKM-CARE/F00408This paper’s publication also funded by UTeM Incentive Jurnal Q00049/JURNAL/2020/FKM.
文摘Naturalfibre as a reinforcing agent has been widely used in many industrial applications.Nevertheless,several factors need to be considered,such as the size and weight percentage of thefibre used in binding.Using fused deposition modelling(FDM),this factor was investigated by varying the size of naturalfibre as the responding variable with afixed weight percentage of kenaffibre.The process of modifying the naturalfibre in terms of size might increase the dispersion of kenaffibre in the polymer matrix and increase the adhesion bonding between thefibre and matrix of composites,subsequently improving the interfacial bonding between these two phases.In this paper,the effect offibre size was evaluated by performing the mechanical test,Scanning Electron Micrograph(SEM)to observe the morphology of the composites,and also by surface analysis.The surface roughness was visualised using a 3D profilometer and thefigure was illustrated as colour shading in the image.The composite withfibre size≤100μm displayed better tensile andflexural strength,compared to other sizes.In conclusion,by reducing the size of thefibre,the composites could develop high strength performance for industrial applications.
基金Supported by the Science and Technology Support Key Project of Jiangsu Province (DE2008365)~~
文摘Based on analyzing the influences of a slicing scheme on stair-stepping effect, supporting structure, efficiency and deformation, etc. , analytical hierarchical process （AHP） combining with fuzzy synthetic evaluation is introduced to make decision in slicing schemes for a processing part. The application in determining the slicing scheme for a computer mouse during prototyping shows that the method increases the rationality during decision- making and improves quality and efficiency for the prototyping part.
文摘Recent exploration results indicate that a significant exploration potential remains in the Dongying Depression of the Bohai Bay Basin and the undiscovered oil and gas are largely reservoired in subtle traps including turbidite litholigcal traps of the Sha-3 Member. In order to effectively guide the exploration program targeting turbidites, this study will focus on the depositional models of the Sha-3 Member turbidites and oil/gas accumulation characteristics in these turbidites. Two corresponding relationships were found. One is that the East African Rift Valley provides a modern analog for the depositional systems in the Dongying Depression. The other is that the depositional models of line-sourced slope aprons, single point-source submarine fan and multiple source ramp turbidite, established for deep-sea turbidites, can be applied to interpret the depositional features of the turbidite fans of three different origins: slope turbidite aprons, lake floor turbidite fans and delta-fed turbidite fans in the Sha-3 Member. Updip sealing integrity is the key factor determining whether oil/gas accumulates or not in the slope aprons and lake floor fans. The factors controlling oil/gas migration and accumulation in the delta-fed turbidite fans are not very clear. Multiple factors rather than a single factor probably played significant roles in these processes.
基金supported by the Na-tional Natural Science Foundation of China(Nos.51575266,52075258)。
文摘In the last decade,3D printing,especially fused deposition modeling(FDM),has revolutionized manufacturing with intricate designs.Traditional 3-axis FDM printers face challenges with complex geometries,but 5-axis versions offer more design freedom.However,it requires specialized strategies.This research presents a model for 5-axis FDM printers using Bézier curves with an algorithm to enhance print quality.The result shows significant accuracy improvements,especially for curve-based tasks.In addition,this study deepens the understanding of 5-axis FDM technology,setting a solid basis for further research and potentially refining manufacturing methods.
基金Project(50490274) supported by the National Natural Science Foundation of China
文摘By the aid of the international mining software SURPAC, a geologic database for a multi-metal mine was established, 3D models of the surface, geologic fault, ore body, cavity and the underground openings were built, and the volume of the cavity of the mine based on the cavity 3D model was calculated. In order to compute the reserves, a grade block model was built and each metal element grade was estimated using Ordinary Kriging. Then, the reserve of each metal element and every sublevel of the mine was worked out. Finally, the calculated result of each metal reserve to its actual prospecting reserve was compared, and the results show that they are all almost equal to each other. The absolute errors of Sn, Pb, and Zn reserves are only 1.45%, 1.59% and 1.62%, respectively. Obviously, the built models are reliable and the calculated results of reserves are correct. They can be used to assist the geologic and mining engineers of the mine to do research work of reserves estimation, mining design, plan making and so on.
基金supported by the Program for Creation of Interdisciplinary Research and Ensemble Program of Frontier Research Institute for Interdisciplinary Sciences,Tohoku University。
文摘Biodegradable polymers are highly attractive as potential alternatives to petroleum-based polymers in an attempt to achieve carbon neutrality whilst maintaining the mechanical properties of the structures.Among these polymers,polylactic acid(PLA)is particularly promising due to its good mechanical properties,biocompatibility and thermoplasticity.In this work,we aim to enhance the mechanical properties of PLA using mechanically-defibrated cellulose nanofibers(CNFs)that exhibit remarkable mechanical properties and biodegradability.We also employ fused deposition modeling(FDM),one of the three-dimensional printing methods for thermoplastic polymers,for the low-cost fabrication of the products.Mechanically-defibrated CNF-reinforced PLA matrix composites are fabricated by FDM.Their tensile properties are investigated in two printing directions(0°/90°and+45°/-45°).The discussion about the relationship between printing direction and tensile behavoir of mechanically-defibrated CNF-reinforced PLA matrix composite is the unique point of this study.We further discuss the microstructure and fracture surface of mechanically-defibrated CNF-reinforced PLA matrix composite by scanning electron microscope.
基金funding support from the National Natural Science Foundation of China(Grant Nos.41972271 and 42177127)Sanya Science and Education Innovation Park of Wuhan University of Technology(Grant No.2020KF0007)。
文摘A novel fiber Bragg grating(FBG)sensor with three-dimensional(3D)fused deposition modeling(FDM)approach is proposed for effective stress measurement in soil mass.The three-diaphragm structure design is developed to measure earth and water pressures simultaneously.The proposed transducer has advantages of small size,high sensitivity,low cost,immunity to electromagnetic interference and rapid prototyping.The working principle,design parameters,and manufacturing details are discussed.The proposed transducer was calibrated for earth and water pressures measurement by using weights and a specially designed pressure chamber,respectively.The calibration results showed that the wavelength of the transducer was proportional to the applied pressure.The sensitivity coefficients of the earth and water pressures were 12.633 nm/MPa and 6.282 nm/MPa,respectively.Repeated tests and error analysis demonstrated the excellent stability and accuracy of the earth and water pressure measurements.The performance of the proposed transducer was further verified by a model experimental test and numerical analysis,which indicated that the proposed transducer has great potential for practical applications.
基金the financial support from the National Natural Science Foundation of China (Grants 11672153, 11232008, and 11227801)
文摘Fused deposition modelling(FDM), a widely used rapid prototyping process, is a promising technique in manufacturing engineering. In this work, a method for characterizing elastic constants of FDM-fabricated materials is proposed. First of all, according to the manufacturing process of FDM, orthotropic constitutive model is used to describe the mechanical behavior. Then the virtual fields method(VFM) is applied to characterize all the mechanical parameters(Q, Q, Q, Q) using the full-field strain,which is measured by digital image correlation(DIC). Since the principal axis of the FDM-fabricated structure is sometimes unknown due to the complexity of the manufacturing process, a disk in diametrical compression is used as the load configuration so that the loading angle can be changed conveniently. To verify the feasibility of the proposed method, finite element method(FEM) simulation is conducted to obtain the strain field of the disk. The simulation results show that higher accuracy can be achieved when the loading angle is close to 30?. Finally, a disk fabricated by FDM was used for the experiment. By rotating the disk, several tests with different loading angles were conducted. To determine the position of the principal axis in each test, two groups of parameters(Q, Q, Q, Q) are calculated by two different groups of virtual fields. Then the corresponding loading angle can be determined by minimizing the deviation between two groups of the parameters. After that, the four constants(Q, Q, Q, Q) were determined from the test with an angle of 27?.
基金Supported by National Science and Technology Council(CONACYT)of Mexico(Grant No.CB-2010-01-154430)PROMEP Program of the Public Education Secretariat(SEP)of MexicoFund for Research Support(FAI)of UASLP
文摘Although several research works in the literature have focused on studying the capabilities of additive manufacturing(AM) systems, few works have addressed the development of Design for Additive Manufacturing(DfAM) knowledge,tools, rules, and methodologies, which has limited the penetration and impact of AM in industry. In this paper a comprehensive review of design and manufacturing strategies for Fused Deposition Modelling(FDM) is presented.Consequently, several DfAM strategies are proposed and analysed based on existing research works and the operation principles, materials, capabilities and limitations of the FDM process. These strategies have been divided into four main groups: geometry, quality, materials and sustainability. The implementation and practicality of the proposed DfAM is illustrated by three case studies. The new proposed DfAM strategies are intended to assist designers and manufacturers when making decisions to satisfy functional needs, while ensuring manufacturability in FDM systems.Moreover, many of these strategies can be applied or extended to other AM processes besides FDM.
基金PTU Jalandhar,Manufacturing Research Lab GNDEC,Ludhiana and DST GOI for financial support
文摘Fused deposition modeling(FDM) is one of the latest rapid prototyping techniques in which parts can be manufactured at a fast pace and are manufactured with a high accuracy. This research work is carried out to study the friction and wear behavior of parts made of newly developed Nylon6-Fe composite material by FDM. This work also involves the comparison of the friction and wear characteristics of the Nylon6-Fe composite with the existing acrylonitrile butadiene styrene(ABS) filament of the FDM machine. This Is carried out on the pin on disk setup by varying the load(5, 10, 15 and 20 N) and speed(200 and 300 r/min). It is concluded that the newly developed composite is highly wear resistant and can be used in industrial applications where wear resistance is of paramount importance. Morphology of the surface in contact with the Nylon6-Fe composite and ABS is also carried out.
