The digital speckle correlation method is an important optical metrology for sur- face displacement and strain measurement.With this technique,the whole field deformation in- formation can be obtained by tracking the ...The digital speckle correlation method is an important optical metrology for sur- face displacement and strain measurement.With this technique,the whole field deformation in- formation can be obtained by tracking the geometric points on the speckle images based on a correlation-matching search technique.However,general search techniques suffer from great com- putational complexity in the processing of speckle images with large deformation and the large random errors in the processing of images of bad quality.In this paper,an advanced approach based on genetic algorithms (GA) for correlation-matching search is developed.Benefiting from the abilities of global optimum and parallelism searching of GA,this new approach can complete the correlation-matching search with less computational consumption and at high accuracy.Two experimental results from the simulated speckle images have proved the efficiency of the new approach.展开更多
This paper deals with the mode I crack problem of a cracked rubber sheet under plane stress condition using the delicate digital moiré technique. Through the four step phaseshifting method of automated fringe ana...This paper deals with the mode I crack problem of a cracked rubber sheet under plane stress condition using the delicate digital moiré technique. Through the four step phaseshifting method of automated fringe analysis, the displacement fields in the Cartesian coordinate system are given. By the coordinate-transform equation, the radial and circular displacement distributions in the polar coordinate system are obtained. The displacement isoline distributions and displacement vector distributions near the crack tip are discussed. The strain isoline distributions near the crack tip are also analyzed in this paper. Finally, the distribution rules for the mechanical fields near the crack tip are discussed with the sector division method.展开更多
The deformation field around sub-cracks was calculated using the digital speckle correlation method. First, the uni-axial compression tests on sandstone samples containing a pre- fabricated fracture were made. Photomi...The deformation field around sub-cracks was calculated using the digital speckle correlation method. First, the uni-axial compression tests on sandstone samples containing a pre- fabricated fracture were made. Photomicrographs showing the characteristics of the sub-crack development were taken using a scanning electron microscope （SEM）. From these photomicrographs, the real-time images showing the initiation, growth and coalescence of sub-cracks and micro-cracks in the sandstone specimens were obtained and the effects of loading level as well as grain boundaries on the development of cracks were analyzed. Second, the intensity images of the sandstone specimen surface were captured from the observations of the SEM corresponding to different loading levels. Then correlation computation was carried out for the sequential pairs of intensity images to evaluate the displacement components, as well as the strain field. The results show that the deformation varies in different areas separated by sub-cracks during rock damage processes.展开更多
This paper studies the interface curing stresses between polymethyl methacrylate (PMMA) and composite by means of digital speckle correlation method (DSCM).A new method by combining DSCM with the marker points is deve...This paper studies the interface curing stresses between polymethyl methacrylate (PMMA) and composite by means of digital speckle correlation method (DSCM).A new method by combining DSCM with the marker points is developed to measure the interface curing stresses,and the measurement principle is introduced.The interface curing stresses between PMMA and composite with different curing bonding conditions are measured and analyzed,this indicates that the residual stress for furnace heating and furnace cooling is the smallest.Finally,the measurement error is discussed by means of finite element method,the influences of glass microsphere between adhesive and PMMA can be ignored.展开更多
The splitting test is a competitive alternative method to study the tensile strength of sea ice owing to its suitability for sampling.However,the approach was questioned to the neglect of local plastic deformation dur...The splitting test is a competitive alternative method to study the tensile strength of sea ice owing to its suitability for sampling.However,the approach was questioned to the neglect of local plastic deformation during the tests.In this study,splitting tests were performed on sea ice,with 32 samples subjected to the regular procedure and 8 samples subjected to the digital image correlation method.The salinity,density,and temperature were measured to determine the total porosity.With the advantage of the digital image correlation method,the full-field deformation of the ice samples could be determined.In the loading direction,the samples mainly deformed at the ice-platen contact area.In the direction vertical to the loading,deformation appears along the central line where the splitting crack occurs.Based on the distribution of the sample deformation,a modified solution was derived to calculate the tensile strength with the maximum load.Based on the modified solution,the tensile strength was further calculated together with the splitting test results.The results show that the tensile strength has a negative correlation with the total porosity,which agrees with previous studies based on uniaxial tension tests.展开更多
We present an improved digital image processing(DIP)method to calculate the widths of single slits.Different from the traditional laser Fraunhofer diffraction experiment in college physical experiments,by performing f...We present an improved digital image processing(DIP)method to calculate the widths of single slits.Different from the traditional laser Fraunhofer diffraction experiment in college physical experiments,by performing fast Fourier transform,inverse fast Fourier transform and the nonlinear leastsquare fitting on the diffraction pattern taken by a camera,the DIP method can quickly return an analytic expression,whose period is used to calculate widths of single slits.By comparing the measured results by the DIP method and the successional difference(SD)method,we find that for a single slit whose width is 60372μm,the DIP method is more accurate.Experimental results show that for single slits with widths between 40μm and 160μm,the relative error of the DIP method is less than 2.78%.Also,the DIP method can be used to measure the diameter of filament and fibres online in real time.展开更多
Objective To create an unique new method of digital orthopedic surgery and widely apply to spinal surgery,treatment of bone and joint injuries,ligament reconstruction and repair,bone minor resection and reconstruction...Objective To create an unique new method of digital orthopedic surgery and widely apply to spinal surgery,treatment of bone and joint injuries,ligament reconstruction and repair,bone minor resection and reconstruction,serious bone and展开更多
The sinusoid curve fit is widely applied in the evaluation of digitized measurement equipment, such as data acquisition system, digital storage oscilloscope, waveform recorder and A/D converter,etc. Because of the di...The sinusoid curve fit is widely applied in the evaluation of digitized measurement equipment, such as data acquisition system, digital storage oscilloscope, waveform recorder and A/D converter,etc. Because of the distortion and noise of sinusoid signal generator, the digitizing and the non linearity errors in measurement, it is impossible to avoid the distortion and the noise in sinusoid sampling series. The distortion and the noise limit the accuracy of curve fit results. Therefore, it is desirable to find a filter that can filter out both distortion and noise of the sinusoid sampling series, and in the meantime, the filter doesn′t influence the amplitude, the frequency, the phase and DC bias of fitting curve of the sine wave. And then, the uncertainty of fitting parameter can be reduced. This filter is designed and realized. Its realization in time domain is described and its transfer function in frequency domain is presented.展开更多
A new method for measuring the characteristic of electrostriction by a digital speckle correlation method （DSCM） is presented. The in-plane displacement is obtained by using the DSCM, and the out-plane displacement ...A new method for measuring the characteristic of electrostriction by a digital speckle correlation method （DSCM） is presented. The in-plane displacement is obtained by using the DSCM, and the out-plane displacement is obtained by the geometrical relation of the triangle theory. In this application, high field electrostrictive strains of barium titanate/polyurethane elastomer composite materials are measured. The electrostrictive strain is evaluated when the application of an electric field is repeated, and then the electrostrictive coefficient of the sample is obtained. To improve the measuring accuracy, the bilinear interpolation of gray value is used to obtain the sub-pixel gray value. The results are compared with those obtained from the surface fitting algorithm. The experimental results demonstrate that the electrostrictive response of polyurethane increases with the introduction of barium titanate into polyurethane. And by using the DSCM, the measurement of the characteristic of electrostriction can be done quickly and accurately. The DSCM provides an effective tool for the evaluation of electrostrictive response.展开更多
A backfilling body-coal pillar-backfilling body(BPB)structure formed by pillar-side cemented paste backfilling can bear overburden stress and ensure safe mining.However,the failure response of BPB composite samples mu...A backfilling body-coal pillar-backfilling body(BPB)structure formed by pillar-side cemented paste backfilling can bear overburden stress and ensure safe mining.However,the failure response of BPB composite samples must be investigated.This paper examines the deformation characteristics and damage evolution of six types of BPB composite samples using a digital speckle correlation method under uniaxial compression conditions.A new damage evolution equation was established on the basis of the input strain energy and dissipated strain energy at the peak stress.The prevention and control mechanisms of the backfilling body on the coal pillar instability were discussed.The results show that the deformation localization and macroscopic cracks of the BPB composite samples first appeared at the coal-backfilling interface,and then expanded to the backfilling elements,ultimately appearing in the coal elements.The elastic strain energy in the BPB composite samples reached a maximum at the peak stress,whereas the dissipated energy continued to accumulate and increase.The damage evolution curve and equation agree well with the test results,providing further understanding of instability prevention and the control mechanisms of the BPB composite samples.The restraining effect on the coal pillar was gradually reduced with decreasing backfilling body element's volume ratio,and the BPB composite structure became more vulnerable to failure.This research is expected to guide the design,stability monitoring,instability prevention,and control of BPB structures in pillar-side cemented paste backfilling mining.展开更多
Roof pre-splitting is an effective method to control the roof with potential rock burst risk.In this study,three-point bending tests were carried out by using fine sandstone specimens with different pre-cracked length...Roof pre-splitting is an effective method to control the roof with potential rock burst risk.In this study,three-point bending tests were carried out by using fine sandstone specimens with different pre-cracked lengths as test objects,and digital speckle correlation method(DSCM)and acoustic emission(AE)technology were used to track the entire process of crack propagation.The effect of pre-cracks on the fracture of rock beams was evaluated,and the mechanical mechanism of the rock beam fracture process was analyzed.The rock beam pre-splitting design method was developed,and the application effect of the method was proved by the microseismic monitoring data obtained from the 10303 working face of Jining No.2 coal mine in China.The results show that the loading time history curve of pre-cracked beams exhibits obvious residual characteristics.Compared with the intact rock beam,the tensile strength,and maximum tensile strain of 35 mm pre-cracked rock beam are decreased by 32.4% and 33.1%,respectively and the acoustic emission b value is increased by 30.2%.According to the pre-splitting design method of rock beam,the maximum and average microseismic energy of the 10303 working face after pre-splitting construction are reduced by 25.6% and 6.4%,respectively,with excellent prevention and control effect of thick roof.展开更多
In structure inspections, applications of optical techniques are rare, but the advantages of a noncontact, full field technique using a simple apparatus are attractive. The main requirements for structure inspection a...In structure inspections, applications of optical techniques are rare, but the advantages of a noncontact, full field technique using a simple apparatus are attractive. The main requirements for structure inspection are the full-field strain measurement with the required precision and on-site measurement ability. The digital correlation method （DCM）, a new optical deformation measurement tool, can satisfy all of the requirements for structure inspection. A smoothing algorithm which can greatly improve the strain measurement precision, and a 3-D DCM have been developed in this paper. For verifying this improvement, a comparison of strain measurements by computer-simulated speckle images has been carried out. Additionally, three structure inspection examples that cover typical materials and structure styles are presented： the interface shear stress distribution for reinforced concrete piles bedded on rock, the 3-D strain distribution of a composite vessel structure, and stresses in a hookup that connects two steel bridge structures. All the examples show that the new structural inspection tool is exemplary and illustrates the obvious advantages of this optical non-destructive technique.展开更多
Inspired by the design philosophy of information metasurfaces based on the digital coding concept,a planar 4-bit reconfigurable antenna array with low profile of 0.15λ0(whereλ0is the free-space wavelength)is present...Inspired by the design philosophy of information metasurfaces based on the digital coding concept,a planar 4-bit reconfigurable antenna array with low profile of 0.15λ0(whereλ0is the free-space wavelength)is presented.The array is based on a digital coding radiation element consisting of a 1-bit magnetoelectric(ME)dipole and a miniaturized reflection-type phase shifter(RTPS).The proposed 1-bit ME dipole can provide two digital states of"0"and"1"(with 0°and 180°phase responses)over a wide frequency band by individually exciting its two symmetrical feeding ports.The designed RTPS is able to realize a relative phase shift of 173°.By digitally quantizing its phase in the range of 157.5°,additional eight digital states at intervals of 22.5°are obtained.To achieve low sidelobe levels,a 1:16 power divider based on the Taylor line source method is employed to feed the array,A prototype of the proposed 4-bit antenna array has been fabricated and tested,and the experimental results are in good agreement with the simulations.Scanning beams within a±45°range were measured with a maximum realized gain of 13.4 dBi at12 GHz.The sidelobe and cross-polarization levels are below-14.3 and-23.0 dB,respectively.Furthermore,the beam pointing error is within 0.8°,and the 3 dB gain bandwidth of the broadside beam is 25%.Due to its outstanding performance,the array holds potential for significant applications in radar and wireless communication systems.展开更多
We present a global optimization method, called the genetic algorithms (GAs), for digital image/speckle correlation (DISC). The new algorithms do not involve reasonable initial guess of displacement and deformation gr...We present a global optimization method, called the genetic algorithms (GAs), for digital image/speckle correlation (DISC). The new algorithms do not involve reasonable initial guess of displacement and deformation gradient and the calculation of second-order spatial derivatives of the digital images, which are important challenges in practical implementation of DISC. The performance of a GA depends largely on the selection of the genetic operators. We test various operators and propose optimal operators. The algorithms are then verified using simulated images and experimental speckle images.展开更多
A three-nested-deformation model is proposed to describe crack-tip fields in rubber-like materials with large deformation. The model is inspired by the distribution of the measured in-plane and out-of-plane deformatio...A three-nested-deformation model is proposed to describe crack-tip fields in rubber-like materials with large deformation. The model is inspired by the distribution of the measured in-plane and out-of-plane deformation. The in- plane displacement of crack-tip fields under both Mode 1 and mixed-mode （Mode I-II） fracture conditions is measured by using the digital Moir6 method. The deformation character- istics and experimental sector division mode are investigated by comparing the measured displacement fields under differ- ent fracture modes. The out-of-plane displacement field near the crack tip is measured using the three-dimensional digital speckle correlation method.展开更多
In order to study the damage mechanism of asphalt mixture,it is important to obtain the distribution of displacement and strain of its sample in the indirect tension mode.As a result,the digital image correlation meth...In order to study the damage mechanism of asphalt mixture,it is important to obtain the distribution of displacement and strain of its sample in the indirect tension mode.As a result,the digital image correlation method (DICM) was used to evaluate the displacement field and strain field of asphalt mixture.The results showed that the displacement fields under DICM and ABAQUS are similarly;the strain fields are different due to the different modulus of mastic and aggregate;and DICM is an practical method to study the indirect tension displacement and stain.展开更多
Water-preserved mining is one of the important parts of the ‘Green Mining’ technological system. The purpose of wa-ter-preserved mining is to prevent water from bursting out in coal mines and thus to protect water r...Water-preserved mining is one of the important parts of the ‘Green Mining’ technological system. The purpose of wa-ter-preserved mining is to prevent water from bursting out in coal mines and thus to protect water resources. The principle of wa-ter-resisting key strata (WKS) is proposed to establish a model capable of guiding and developing water-preserved mining technol-ogy. The experimental model of the WKS is constructed following requirements of the Data Image Correlative Method (DICM). Five experimental schemes are designed according to different combined patterns of the WKS. The water-resisting performance of the WKS is analyzed from observation of structural stability. All of them provide referential value for water-preserved mining.展开更多
Seismic hazard analysis is gaining increased attention in the present era because of the catastrophic effects of earthquakes.Scientists always have as a goal to develop new techniques that will help forecast earthquak...Seismic hazard analysis is gaining increased attention in the present era because of the catastrophic effects of earthquakes.Scientists always have as a goal to develop new techniques that will help forecast earthquakes before their reoccurrence. In this research,we have performed a shear failure experiment on rock samples with prefabricated cracks to simulate the process of plate movement that forms strike-slip faults. We studied the evolution law of the deformation field to simulate the shear failure experiment, and these results gave us a comprehensive understanding of the elaborate strain distribution law and its formation process with which to identify actual fault zones. We performed uniaxial compression tests on marble slabs with prefabricated double shear cracks to study the distribution and evolution of the deformation field during shear failure. Analysis of the strain field at different loading stages showed that with an increase in the load, the shear strain field initially changed to a disordered-style distribution. Further, the strain field was partially concentrated and finally completely concentrated near the crack and then distributed in the shape of a strip along the crack. We also computed coefficients of variation(CVs) for the physical quantities u, v, and exy, which varied with the load. The CV curves were found to correspond to the different loading stages. We found that at the uniform deformation stage, the CV value was small and changed slowly,whereas at the later nonuniform deformation stage, the CV value increased sharply and changed abruptly. Therefore, the precursor to a rock sample breakdown can be predicted by observing the variation characteristics of CV statistics. The correlation we found between our experimental and theoretical results revealed that our crack evolution and sample deformation results showed good coupling with seismic distribution characteristics near the San Andreas Fault.展开更多
In order to study the failure process of an anchorage structure and the evolution law of the body＇s defor- mation field, anchor push-out tests were carried out based on digital speckle correlation methods （DSCM）. T...In order to study the failure process of an anchorage structure and the evolution law of the body＇s defor- mation field, anchor push-out tests were carried out based on digital speckle correlation methods （DSCM）. The stress distribution of the anchorage interface was investigated using the particle flow numerical simulation method. The results indicate that there are three stages in the deformation and fail- ure process of an anchorage structure： elastic bonding stage, a de-bonding stage and a failure stage. The stress distribution in the interface controls the stability of the structure. In the elastic bonding stage, the shear stress peak point of the interface is close to the loading end, and the displacement field gradually develops into a ＂V＂ shape, in the de-bonding stage, there is a shear stress plateau in the center of the anchorage section, and shear strain localization begins to form in the deformation field. In the failure stage, the bonding of the interface fails rapidly and the shear stress peak point moves to the anchorage free end. The anchorage structure moves integrally along the macro-cracl~ The de-bonding stage is a research focus in the deformation and failure process of an anchorage structure, and plays an important guiding role in roadway support design and prediction of the stability of the surrounding rock.展开更多
基金Project supported by the National Natural Science Foundation of China(No.19772033)the Research Innovation Fund of Tsinghua University for Ph.D.Candidates(No.092410048).
文摘The digital speckle correlation method is an important optical metrology for sur- face displacement and strain measurement.With this technique,the whole field deformation in- formation can be obtained by tracking the geometric points on the speckle images based on a correlation-matching search technique.However,general search techniques suffer from great com- putational complexity in the processing of speckle images with large deformation and the large random errors in the processing of images of bad quality.In this paper,an advanced approach based on genetic algorithms (GA) for correlation-matching search is developed.Benefiting from the abilities of global optimum and parallelism searching of GA,this new approach can complete the correlation-matching search with less computational consumption and at high accuracy.Two experimental results from the simulated speckle images have proved the efficiency of the new approach.
基金Project supported by the National Natural Sciences Foundation of China (No. 10572102).
文摘This paper deals with the mode I crack problem of a cracked rubber sheet under plane stress condition using the delicate digital moiré technique. Through the four step phaseshifting method of automated fringe analysis, the displacement fields in the Cartesian coordinate system are given. By the coordinate-transform equation, the radial and circular displacement distributions in the polar coordinate system are obtained. The displacement isoline distributions and displacement vector distributions near the crack tip are discussed. The strain isoline distributions near the crack tip are also analyzed in this paper. Finally, the distribution rules for the mechanical fields near the crack tip are discussed with the sector division method.
基金supported by the NaturalScience Foundation of China(contract no.40821062)
文摘The deformation field around sub-cracks was calculated using the digital speckle correlation method. First, the uni-axial compression tests on sandstone samples containing a pre- fabricated fracture were made. Photomicrographs showing the characteristics of the sub-crack development were taken using a scanning electron microscope （SEM）. From these photomicrographs, the real-time images showing the initiation, growth and coalescence of sub-cracks and micro-cracks in the sandstone specimens were obtained and the effects of loading level as well as grain boundaries on the development of cracks were analyzed. Second, the intensity images of the sandstone specimen surface were captured from the observations of the SEM corresponding to different loading levels. Then correlation computation was carried out for the sequential pairs of intensity images to evaluate the displacement components, as well as the strain field. The results show that the deformation varies in different areas separated by sub-cracks during rock damage processes.
基金supported by the National Basic Research Program (973 Program) of China (2011CB606105)
文摘This paper studies the interface curing stresses between polymethyl methacrylate (PMMA) and composite by means of digital speckle correlation method (DSCM).A new method by combining DSCM with the marker points is developed to measure the interface curing stresses,and the measurement principle is introduced.The interface curing stresses between PMMA and composite with different curing bonding conditions are measured and analyzed,this indicates that the residual stress for furnace heating and furnace cooling is the smallest.Finally,the measurement error is discussed by means of finite element method,the influences of glass microsphere between adhesive and PMMA can be ignored.
基金This study was supported financially by the National Key Research and Development Program of China(Grant no.2018YFA0605902)the National Natural Science Foundation of China(Grant no.52101300)+1 种基金the Fundamental Research Funds for the Central Universities(Grant no.DUT21LK03)Joint Scientific Research Fund Project of DBJI(Grant no.ICR2102).
文摘The splitting test is a competitive alternative method to study the tensile strength of sea ice owing to its suitability for sampling.However,the approach was questioned to the neglect of local plastic deformation during the tests.In this study,splitting tests were performed on sea ice,with 32 samples subjected to the regular procedure and 8 samples subjected to the digital image correlation method.The salinity,density,and temperature were measured to determine the total porosity.With the advantage of the digital image correlation method,the full-field deformation of the ice samples could be determined.In the loading direction,the samples mainly deformed at the ice-platen contact area.In the direction vertical to the loading,deformation appears along the central line where the splitting crack occurs.Based on the distribution of the sample deformation,a modified solution was derived to calculate the tensile strength with the maximum load.Based on the modified solution,the tensile strength was further calculated together with the splitting test results.The results show that the tensile strength has a negative correlation with the total porosity,which agrees with previous studies based on uniaxial tension tests.
基金National Natural Science Foundtion of China(No.11435011)Young Teachers Fund of Nanjing Institute of Technology,China(Nos.QKJ201907 and QKJ201908)+2 种基金China Scholarship Council(No.201708320319)Postgraduate Research and Practice Innovation Program of Jiangsu Province,China(No.KYZZ16-0349)Qing Lan Project of Jiangsu Province,China。
文摘We present an improved digital image processing(DIP)method to calculate the widths of single slits.Different from the traditional laser Fraunhofer diffraction experiment in college physical experiments,by performing fast Fourier transform,inverse fast Fourier transform and the nonlinear leastsquare fitting on the diffraction pattern taken by a camera,the DIP method can quickly return an analytic expression,whose period is used to calculate widths of single slits.By comparing the measured results by the DIP method and the successional difference(SD)method,we find that for a single slit whose width is 60372μm,the DIP method is more accurate.Experimental results show that for single slits with widths between 40μm and 160μm,the relative error of the DIP method is less than 2.78%.Also,the DIP method can be used to measure the diameter of filament and fibres online in real time.
文摘Objective To create an unique new method of digital orthopedic surgery and widely apply to spinal surgery,treatment of bone and joint injuries,ligament reconstruction and repair,bone minor resection and reconstruction,serious bone and
文摘The sinusoid curve fit is widely applied in the evaluation of digitized measurement equipment, such as data acquisition system, digital storage oscilloscope, waveform recorder and A/D converter,etc. Because of the distortion and noise of sinusoid signal generator, the digitizing and the non linearity errors in measurement, it is impossible to avoid the distortion and the noise in sinusoid sampling series. The distortion and the noise limit the accuracy of curve fit results. Therefore, it is desirable to find a filter that can filter out both distortion and noise of the sinusoid sampling series, and in the meantime, the filter doesn′t influence the amplitude, the frequency, the phase and DC bias of fitting curve of the sine wave. And then, the uncertainty of fitting parameter can be reduced. This filter is designed and realized. Its realization in time domain is described and its transfer function in frequency domain is presented.
基金Foundation items:The National Natural Science Foundation of China(No.10472026)the Natural Science Foundation of Jiangsu Province(No.BK2003063).
文摘A new method for measuring the characteristic of electrostriction by a digital speckle correlation method （DSCM） is presented. The in-plane displacement is obtained by using the DSCM, and the out-plane displacement is obtained by the geometrical relation of the triangle theory. In this application, high field electrostrictive strains of barium titanate/polyurethane elastomer composite materials are measured. The electrostrictive strain is evaluated when the application of an electric field is repeated, and then the electrostrictive coefficient of the sample is obtained. To improve the measuring accuracy, the bilinear interpolation of gray value is used to obtain the sub-pixel gray value. The results are compared with those obtained from the surface fitting algorithm. The experimental results demonstrate that the electrostrictive response of polyurethane increases with the introduction of barium titanate into polyurethane. And by using the DSCM, the measurement of the characteristic of electrostriction can be done quickly and accurately. The DSCM provides an effective tool for the evaluation of electrostrictive response.
基金supported by the Shanxi Science and Technology Major Project (No.20201102004)the Distinguished Youth Funds of National Natural Science Foundation of China (No.51925402)+2 种基金the National Natural Science Foundation of China (Nos.52174125,52004171,and 51904203)the Outstanding Youth Cultivation Project in Shanxi Province,China (No.202103021222008)the Key Science and Technology Innovation Team of“1331”Project in Shanxi Province,China,and the Open Fund Project of Key Laboratory of Mining Disaster Prevention and Control (No.MDPC202004)。
文摘A backfilling body-coal pillar-backfilling body(BPB)structure formed by pillar-side cemented paste backfilling can bear overburden stress and ensure safe mining.However,the failure response of BPB composite samples must be investigated.This paper examines the deformation characteristics and damage evolution of six types of BPB composite samples using a digital speckle correlation method under uniaxial compression conditions.A new damage evolution equation was established on the basis of the input strain energy and dissipated strain energy at the peak stress.The prevention and control mechanisms of the backfilling body on the coal pillar instability were discussed.The results show that the deformation localization and macroscopic cracks of the BPB composite samples first appeared at the coal-backfilling interface,and then expanded to the backfilling elements,ultimately appearing in the coal elements.The elastic strain energy in the BPB composite samples reached a maximum at the peak stress,whereas the dissipated energy continued to accumulate and increase.The damage evolution curve and equation agree well with the test results,providing further understanding of instability prevention and the control mechanisms of the BPB composite samples.The restraining effect on the coal pillar was gradually reduced with decreasing backfilling body element's volume ratio,and the BPB composite structure became more vulnerable to failure.This research is expected to guide the design,stability monitoring,instability prevention,and control of BPB structures in pillar-side cemented paste backfilling mining.
基金Project(2019SDZY02)supported by Major Scientific and Technological Innovation Project of Shandong Provincial Key Research Development Program,ChinaProject(ZR2019ZD13)supported by Major Program of Shandong Provincial Natural Science Foundation,ChinaProject(52274086)supported by the National Natural Science Foundation of China。
文摘Roof pre-splitting is an effective method to control the roof with potential rock burst risk.In this study,three-point bending tests were carried out by using fine sandstone specimens with different pre-cracked lengths as test objects,and digital speckle correlation method(DSCM)and acoustic emission(AE)technology were used to track the entire process of crack propagation.The effect of pre-cracks on the fracture of rock beams was evaluated,and the mechanical mechanism of the rock beam fracture process was analyzed.The rock beam pre-splitting design method was developed,and the application effect of the method was proved by the microseismic monitoring data obtained from the 10303 working face of Jining No.2 coal mine in China.The results show that the loading time history curve of pre-cracked beams exhibits obvious residual characteristics.Compared with the intact rock beam,the tensile strength,and maximum tensile strain of 35 mm pre-cracked rock beam are decreased by 32.4% and 33.1%,respectively and the acoustic emission b value is increased by 30.2%.According to the pre-splitting design method of rock beam,the maximum and average microseismic energy of the 10303 working face after pre-splitting construction are reduced by 25.6% and 6.4%,respectively,with excellent prevention and control effect of thick roof.
文摘In structure inspections, applications of optical techniques are rare, but the advantages of a noncontact, full field technique using a simple apparatus are attractive. The main requirements for structure inspection are the full-field strain measurement with the required precision and on-site measurement ability. The digital correlation method （DCM）, a new optical deformation measurement tool, can satisfy all of the requirements for structure inspection. A smoothing algorithm which can greatly improve the strain measurement precision, and a 3-D DCM have been developed in this paper. For verifying this improvement, a comparison of strain measurements by computer-simulated speckle images has been carried out. Additionally, three structure inspection examples that cover typical materials and structure styles are presented： the interface shear stress distribution for reinforced concrete piles bedded on rock, the 3-D strain distribution of a composite vessel structure, and stresses in a hookup that connects two steel bridge structures. All the examples show that the new structural inspection tool is exemplary and illustrates the obvious advantages of this optical non-destructive technique.
基金supported in part by the National Key Research and Development Program of China(2017YFA0700201,2017YFA0700202,and 2017YFA0700203)the National Natural Science Foundation of China(61631007,61571117,61138001,61371035,61722106,61731010,11227904,and 62171124)+1 种基金the 111 Project(111-2-05)the Scientific Research Foundation of Graduate School of Southeast University(YBYP2119)。
文摘Inspired by the design philosophy of information metasurfaces based on the digital coding concept,a planar 4-bit reconfigurable antenna array with low profile of 0.15λ0(whereλ0is the free-space wavelength)is presented.The array is based on a digital coding radiation element consisting of a 1-bit magnetoelectric(ME)dipole and a miniaturized reflection-type phase shifter(RTPS).The proposed 1-bit ME dipole can provide two digital states of"0"and"1"(with 0°and 180°phase responses)over a wide frequency band by individually exciting its two symmetrical feeding ports.The designed RTPS is able to realize a relative phase shift of 173°.By digitally quantizing its phase in the range of 157.5°,additional eight digital states at intervals of 22.5°are obtained.To achieve low sidelobe levels,a 1:16 power divider based on the Taylor line source method is employed to feed the array,A prototype of the proposed 4-bit antenna array has been fabricated and tested,and the experimental results are in good agreement with the simulations.Scanning beams within a±45°range were measured with a maximum realized gain of 13.4 dBi at12 GHz.The sidelobe and cross-polarization levels are below-14.3 and-23.0 dB,respectively.Furthermore,the beam pointing error is within 0.8°,and the 3 dB gain bandwidth of the broadside beam is 25%.Due to its outstanding performance,the array holds potential for significant applications in radar and wireless communication systems.
基金This work was supported by 985 Education Development Plan of Tianjin University
文摘We present a global optimization method, called the genetic algorithms (GAs), for digital image/speckle correlation (DISC). The new algorithms do not involve reasonable initial guess of displacement and deformation gradient and the calculation of second-order spatial derivatives of the digital images, which are important challenges in practical implementation of DISC. The performance of a GA depends largely on the selection of the genetic operators. We test various operators and propose optimal operators. The algorithms are then verified using simulated images and experimental speckle images.
基金supported by the National Natural Science Foundation of China (10732080 and 11102134)
文摘A three-nested-deformation model is proposed to describe crack-tip fields in rubber-like materials with large deformation. The model is inspired by the distribution of the measured in-plane and out-of-plane deformation. The in- plane displacement of crack-tip fields under both Mode 1 and mixed-mode （Mode I-II） fracture conditions is measured by using the digital Moir6 method. The deformation character- istics and experimental sector division mode are investigated by comparing the measured displacement fields under differ- ent fracture modes. The out-of-plane displacement field near the crack tip is measured using the three-dimensional digital speckle correlation method.
基金Sponsored by the National Science and Technology Infrastructure Program (Grant No. 2006BAJ18B05)the National Natural Science Foundation of China(Grant No.50778057)+1 种基金Program for New Century Excellent Talents in University (Grant No. NCET-06-0340)the Specialized Research Fund for the Doctoral Program of Higher Education (Grant No. 20060213002)
文摘In order to study the damage mechanism of asphalt mixture,it is important to obtain the distribution of displacement and strain of its sample in the indirect tension mode.As a result,the digital image correlation method (DICM) was used to evaluate the displacement field and strain field of asphalt mixture.The results showed that the displacement fields under DICM and ABAQUS are similarly;the strain fields are different due to the different modulus of mastic and aggregate;and DICM is an practical method to study the indirect tension displacement and stain.
基金Projects 2007CB209400 supported by the National Basic Research Program of China (973)50574090 and 50634050 by the National Natural Science Foundation of China
文摘Water-preserved mining is one of the important parts of the ‘Green Mining’ technological system. The purpose of wa-ter-preserved mining is to prevent water from bursting out in coal mines and thus to protect water resources. The principle of wa-ter-resisting key strata (WKS) is proposed to establish a model capable of guiding and developing water-preserved mining technol-ogy. The experimental model of the WKS is constructed following requirements of the Data Image Correlative Method (DICM). Five experimental schemes are designed according to different combined patterns of the WKS. The water-resisting performance of the WKS is analyzed from observation of structural stability. All of them provide referential value for water-preserved mining.
基金Support for this research was provided by the National Key R&D Program of China(grant numbers 2018YFC1504203 and SQ2017YFSF040025)
文摘Seismic hazard analysis is gaining increased attention in the present era because of the catastrophic effects of earthquakes.Scientists always have as a goal to develop new techniques that will help forecast earthquakes before their reoccurrence. In this research,we have performed a shear failure experiment on rock samples with prefabricated cracks to simulate the process of plate movement that forms strike-slip faults. We studied the evolution law of the deformation field to simulate the shear failure experiment, and these results gave us a comprehensive understanding of the elaborate strain distribution law and its formation process with which to identify actual fault zones. We performed uniaxial compression tests on marble slabs with prefabricated double shear cracks to study the distribution and evolution of the deformation field during shear failure. Analysis of the strain field at different loading stages showed that with an increase in the load, the shear strain field initially changed to a disordered-style distribution. Further, the strain field was partially concentrated and finally completely concentrated near the crack and then distributed in the shape of a strip along the crack. We also computed coefficients of variation(CVs) for the physical quantities u, v, and exy, which varied with the load. The CV curves were found to correspond to the different loading stages. We found that at the uniform deformation stage, the CV value was small and changed slowly,whereas at the later nonuniform deformation stage, the CV value increased sharply and changed abruptly. Therefore, the precursor to a rock sample breakdown can be predicted by observing the variation characteristics of CV statistics. The correlation we found between our experimental and theoretical results revealed that our crack evolution and sample deformation results showed good coupling with seismic distribution characteristics near the San Andreas Fault.
基金financially supported by the National Key Basic Research Program of China (No.2010CB226805)the National Natural Science Foundation of China (Nos.51474136 and 51474013)+1 种基金the Opening Project Fund of State Key Laboratory of Mining Disaster Prevention and Control Co-founded by Shandong Province and the Ministry of Science and Technology (No.MDPC2013KF06)the Research Award Fund for the Excellent Youth of Shandong University of Science and Technology (No.2011KYJQ106)
文摘In order to study the failure process of an anchorage structure and the evolution law of the body＇s defor- mation field, anchor push-out tests were carried out based on digital speckle correlation methods （DSCM）. The stress distribution of the anchorage interface was investigated using the particle flow numerical simulation method. The results indicate that there are three stages in the deformation and fail- ure process of an anchorage structure： elastic bonding stage, a de-bonding stage and a failure stage. The stress distribution in the interface controls the stability of the structure. In the elastic bonding stage, the shear stress peak point of the interface is close to the loading end, and the displacement field gradually develops into a ＂V＂ shape, in the de-bonding stage, there is a shear stress plateau in the center of the anchorage section, and shear strain localization begins to form in the deformation field. In the failure stage, the bonding of the interface fails rapidly and the shear stress peak point moves to the anchorage free end. The anchorage structure moves integrally along the macro-cracl~ The de-bonding stage is a research focus in the deformation and failure process of an anchorage structure, and plays an important guiding role in roadway support design and prediction of the stability of the surrounding rock.
