Recycling spent lithium-ion batteries(SLIBs)has become essential to preserve the environment and reclaim vital resources for sustainable development.The typical SLIBs recycling concentrated on separating valuable comp...Recycling spent lithium-ion batteries(SLIBs)has become essential to preserve the environment and reclaim vital resources for sustainable development.The typical SLIBs recycling concentrated on separating valuable components had limitations,including high energy consumption and complicated separation processes.This work suggests a safe hydrometallurgical process to recover usable metallic cobalt from depleted LiCoO_(2)batteries by utilizing citric acid as leachant and hydrogen peroxide as an oxidizing agent,with ethanol as a selective precipitating agent.The anode graphite was also recovered and converted to graphene oxide(GO).The above components were directly resynthesized to cobaltintegrated nitrogen-doped graphene(Co@NG).The Co@NG showed a decent activity towards oxygen reduction reaction(ORR)with a half-wave potential of 0.880 V vs.RHE,almost similar to Pt/C(0.888 V vs.RHE)and with an onset potential of 0.92 V vs.RHE.The metal-nitrogen-carbon(Co-N-C)having the highest nitrogen content has decreased the barrier for ORR since the reaction was enhanced for Co@NG-800,as confirmed by density functional theory(DFT)simulations.The Co@NG cathode catalyst coupled with commercial Pt-Ru/C as anode catalyst exhibits excellent performance for direct methanol fuel cell(DMFC)with a peak power density of 34.7 mW cm^(-2)at a discharge current density of120 m A cm^(-2)and decent stability,indicating the promising utilization of spent battery materials in DMFC applications.Besides,lithium was recovered from supernatant as lithium carbonate by coprecipitation process.This work avoids sophisticated elemental separation by utilizing SLIBs for other renewable energy applications,lowering the environmental concerns associated with recycling.展开更多
In this study,high-gravity intensified heterogeneous catalytic ozonation is utilized for treatment of phenol-containing wastewater,and the kinetics of the direct reaction between ozone and phenol in the presence of ex...In this study,high-gravity intensified heterogeneous catalytic ozonation is utilized for treatment of phenol-containing wastewater,and the kinetics of the direct reaction between ozone and phenol in the presence of excess tertiary butanol(TBA)is investigated.It is revealed that the direct reaction between ozone and phenol in the rotating packed bed(RPB)follows the pseudo-first-order kinetics with a reaction rate constant higher than that in the conventional bubbling reactor(BR).Under different conditions of temperature,initial pH,high-gravity factor,and gaseous ozone concentration,the apparent reaction rate constant varies in the range of 0.0160–0.115 min-1.An empirical power-exponential model is established to characterize the effects of these parameters on the direct reaction between ozone and phenol by high-gravity intensified heterogeneous catalytic ozonation.展开更多
Methanol cross-over effects from the anode to the cathode are important parameters for reducing catalytic performance in direct methanol fuel cells.A promising candidate catalyst for the cathode in direct methanol fue...Methanol cross-over effects from the anode to the cathode are important parameters for reducing catalytic performance in direct methanol fuel cells.A promising candidate catalyst for the cathode in direct methanol fuel cells must have excellent activity toward oxygen reduction reaction and resistance to methanol oxidation reaction.This review focuses on the methanol tolerant noble metal-based electrocatalysts,including platinum and palladium-based alloys,noble metal–carbon based composites,transition metal-based catalysts,carbon-based metal catalysts,and metal-free catalysts.The understanding of the correlation between the activity and the synthesis method,electrolyte environment and stability issues are highlighted.For the transition metal-based catalyst,their activity,stability and methanol tolerance in direct methanol fuel cells and comparisons with those of platinum are particularly discussed.Finally,strategies to enhance the methanol tolerance and hinder the generation of mixed potential in direct methanol fuel cells are also presented.This review provides a perspective for future developments for the scientist in selecting suitable methanol tolerate catalyst for oxygen reduction reaction and designing high-performance practical direct methanol fuel cells.展开更多
The oxide-zeolite process provides a promising way for one-step production of aromatics from syngas,whereas the reasons for the dramatic effect of intimacy between oxide and zeolite in the composite catalyst on the pr...The oxide-zeolite process provides a promising way for one-step production of aromatics from syngas,whereas the reasons for the dramatic effect of intimacy between oxide and zeolite in the composite catalyst on the product selectivity are still unclear. In order to explore the optimal intimacy and the essential influence factors, ZnCrOxcombined with ZSM-5 are employed to prepare the composite catalysts with different distances between the two components by changing the mixing methods. An aromatic selectivity of 74%(with CO conversion to be 16%) is achieved by the composite catalyst when the intimacy is in the range of nanometer. A so-called ‘iterative reactions’ mechanism of intermediates over oxides is then proposed and studied: the intermediate chemical can undergo a hydrogenation reaction on oxide.So the shorter the intermediates stay on oxide, the more of chance for C-C coupling takes place on zeolite to form aromatics. Moreover, the aero-environments of reaction is found to impact on the extent of iterative reaction as well. Therefore, when the intimacy between the two components changes, the extent of iterative reactions vary, resulting in alteration of product distribution. This work provides new insight in understanding the mechanisms during the complex process of OX-ZEO composite catalysis and sheds light to the design of a high-yield catalyst for synthetization of aromatics from syngas.展开更多
Objective:To compare the sensitivity and specificity of direct fecal smear microscopy,culture,and polymerase chain reaction in the detection of Blastocystis sp.in human stool.Methods:Human stool samples were collected...Objective:To compare the sensitivity and specificity of direct fecal smear microscopy,culture,and polymerase chain reaction in the detection of Blastocystis sp.in human stool.Methods:Human stool samples were collected from a community in San Isidro,Rodriguez,Rizal,Philippines.These samples were subjected to direct fecal smear microscopy,culture and polymerase chain reaction to detect the presence of Blastocystis sp.Results:Of the 110 stool samples collected,28(25%)were detected positive for the presence of Blastocystis sp.by two or more tests.Culture method detected the highest number of Blastocystis-positive stool samples(n=36),followed by PCR of DNA extracted from culture(n=26),PCR of DNA extracted from stool(n=10),and direct fecal smear(n=9).Compared to culture,the sensitivity of the other detection methods were 66.7%for PCR from culture and 19.4%for both PCR from stool and direct fecal smear.Specificity of the methods was high,with PCR from culture and direct fecal smear having97.3%,while PCR from stool at 95.9%.Conclusions:In this study,in vitro culture is the best method for detecting Blastocystis sp.in human stool samples.展开更多
Test of consistency is critical for the analytic hierarchy process(AHP) methodology. When a pairwise comparison matrix(PCM) fails the consistency test, the decision maker(DM) needs to make revisions. The state of the ...Test of consistency is critical for the analytic hierarchy process(AHP) methodology. When a pairwise comparison matrix(PCM) fails the consistency test, the decision maker(DM) needs to make revisions. The state of the art focuses on changing a single entry or creating a new matrix based on the original inconsistent matrix so that the modified matrix can satisfy the consistency requirement. However, we have noticed that the reason that causes inconsistency is not only numerical inconsistency, but also logical inconsistency, which may play a more important role in the whole inconsistency. Therefore, to realize satisfactory consistency, first of all, we should change some entries that form a directed circuit to make the matrix logically consistent, and then adjust other entries within acceptable deviations to make the matrix numerically consistent while preserving most of the original comparison information. In this paper, we firstly present some definitions and theories, based on which two effective methods are provided to identify directed circuits. Four optimization models are proposed to adjust the original inconsistent matrix. Finally, illustrative examples and comparison studies show the effectiveness and feasibility of our method.展开更多
Direct propylene epoxidation with H2 and O2,an attractive process to produce propylene oxide(PO),has a potential explosion danger due to the coexistence of flammable gases(i.e.,C3 H6 and H2)and oxidizer(i.e.,O2).The u...Direct propylene epoxidation with H2 and O2,an attractive process to produce propylene oxide(PO),has a potential explosion danger due to the coexistence of flammable gases(i.e.,C3 H6 and H2)and oxidizer(i.e.,O2).The unknown explosion limits of the multi-component feed gas mixture make it difficult to optimize the reaction process under safe operation conditions.In this work,a distribution method is proposed and verified to be effective by comparing estimated and experimental explosion limits of more than 200 kinds of flammable gas mixture.Then,it is employed to estimate the explosion limits of the feed gas mixture,some results of which are also validated by the classic Le Chatelier’s Rule and flammable resistance method.Based on the estimated explosion limits,process optimization is carried out using commercially high and inherently safe reactant concentrations to enhance reaction performance.The promising results are directly obtained through the interface called gOPT in gPROMS only by using a simple,easy-constructed and mature packed-bed reactor,such as the PO yield of 13.3%,PO selectivity of 85.1%and outlet PO fraction of 1.8%.These results can be rationalized by indepth analyses and discussion about the effects of the decision variables on the operation safety and reaction performance.The insights revealed here could shed new light on the process development of the PO production based on the estimation of the explosion limits of the multi-component feed gas mixture containing flammable gase s,inert gas and O2,followed by process optimization.展开更多
Amine-based carbon dioxide(CO2)capture is still limited by high desorption energy consumption.Fixing CO2 into carbonate is a safer and more permanent method.In this work,calcium oxide(CaO)is introduced to perform chem...Amine-based carbon dioxide(CO2)capture is still limited by high desorption energy consumption.Fixing CO2 into carbonate is a safer and more permanent method.In this work,calcium oxide(CaO)is introduced to perform chemical desorption instead of thermal desorption on 1,8-diazabicyclo[5.4.0]undec-7-ene(DBU)aqueous solution after CO2 absorption.The X-ray diffraction(XRD)patterns of solid products show the formation of calcite calcium carbonate(CaCO3),which prove the feasibility of this method.The effects of reaction temperature,reaction time and Ca2+/CO32-molar ratios on the related reactions in CO2 absorption-mineralization process and CaCO3 precipitation are discussed,and purer CaCO3 is obtained by ultrasonic treatment.The CaCO3 content can be increased to 95.8%and the CO2 desorption ratio can achieve 80%by 30 min ultrasonic dispersion treatment under the conditions(40℃,180 min,Ca2+/CO32-molar ratio=1.0).After five cycles,DBU aqueous solution shows stable CO2 absorption and mineralization ability.Fourier transform infrared spectroscopy(FT-IR)spectra of the reaction process also indicate the regeneration of the solvent.Compared with thermal desorption,this process is exothermic,almost without no additional heat.展开更多
Ethane steam cracking process in an industrial reactor was investigated.An one-demsional(1D)steady-state model was developed firstly by using an improved molecular reaction scheme and was then simulated in Aspen Plus....Ethane steam cracking process in an industrial reactor was investigated.An one-demsional(1D)steady-state model was developed firstly by using an improved molecular reaction scheme and was then simulated in Aspen Plus.A comparison of model results with industrial data and previously reported results showed that the model can predict the process kinetics more accurately.In addition,the validated model was used to study the effects of different process variables,including coil outlet temperature(COT),steam-to-ethane ratio and residence time on ethane conversion,ethylene selectivity,products yields,and coking rate.Finally,steady-state optimization was conducted to the operation of industrial reactor.The COT and steam-to-ethane ratio were taken as decision variables to maximize the annual operational profit.展开更多
Background:Traditional Chinese medicines are usually processed before they are used for clinical treatment.This is done in a way associated with the Maillard reaction.Methods:Based on the Maillard reaction,this paper ...Background:Traditional Chinese medicines are usually processed before they are used for clinical treatment.This is done in a way associated with the Maillard reaction.Methods:Based on the Maillard reaction,this paper analyzed the degree of processing of rehmannia root(Rehmanniae radix)relative to the dynamic variation rules of Maillard reaction index parameters,including pH,A420,amino acids,and 5-hydroxymethylfurfural.Furthermore,this study introduced thermal analysis techniques and pyrolysis kinetics to assess the influence of the correlation between processing raw rehmannia root and the Maillard reaction during carbonization.It then went through the whole process of transforming the raw material to end-product in order to explain the scientific connotation of processing it.Results:The results showed that each time rehmannia root was processed,its pH value and amino acid content decreased,while the A420 value and 5-HMF increased.Processing with wine shows a significant difference in these experimental indexes.The position and intensity of the maximum thermal weight loss rate peak of processed rehmannia root at different degrees of processing are different.Comprehensive quantitative 221±0.2°C for processed rehmannia root carbonization was the processing temperature limit.Moreover,the kinetic solution verified that the activation energy corresponding to the carbonization temperature was close to the maximum value of the activation energy of the whole carbonization process,and the optimal mechanism function was g(α)=((1−α)−1/3−1)2.Conclusion:The Maillard reaction occurred during the processing of rehmannia root mixed with carbonization.With each increase of the number of steaming and drying cycles involved in the processing,the level of Maillard reaction increased significantly.The wine-steaming method had a significant effect on the quality of the processed product.展开更多
Based on the theory of first-order reaction kinetics,a thermal reaction kinetic model in integral form has been derive.To make the model more applicable,the effects of time and the conversion degree on the reaction ra...Based on the theory of first-order reaction kinetics,a thermal reaction kinetic model in integral form has been derive.To make the model more applicable,the effects of time and the conversion degree on the reaction rate parameters were considered.Two types of undetermined functions were used to compensate for the intrinsic variation of the reaction rate,and two types of correction methods are provided.The model was explained and verified using published experimental data of different polymer thermal reaction systems,and its effectiveness and wide adaptability were confirmed.For the given kinetic model,only one parameter needs to be determined.The proposed empirical model is expected to be used in the numerical simulation of polymer thermal reaction process.展开更多
As an important form of reactors for gas/liquid/solid catalytic reaction,trickle bed reactors (TBRs) are widely applied in petroleum industry,biochemical,fine chemical and pharmaceutical industries because of their fl...As an important form of reactors for gas/liquid/solid catalytic reaction,trickle bed reactors (TBRs) are widely applied in petroleum industry,biochemical,fine chemical and pharmaceutical industries because of their flexibility,simplicity of operation and high throughput.However,TBRs also show inefficient production and hot pots caused by non-uniform fluid distribution and incomplete wetting of the catalyst,which limit their further application in chemical industry.Also,process intensification in TBRs is necessary as the decrease in quality of processed crude oil,caused by increased exploitation depths,and more restrictive environmental regulations and emission standards for industry,caused by increased environment protection consciousness.In recent years,lots of strategies for process intensification in TBRs have been proposed to improve reaction performance to meet the current and future demands of chemical industry from the environmental and economic perspective.This article summarizes the recent progress in techniques for intensifying gas/liquid/solid reaction in TBRs and application of intensified TBRs in petroleum industry.展开更多
M, a particular industrial waste, was selected to detoxify chromium slag at a high temperature. The carbon remaining in M reduced Cr (Ⅵ) of Na2CrO4 borne in the chromium slag to Cr (Ⅲ) in the solid phase reactio...M, a particular industrial waste, was selected to detoxify chromium slag at a high temperature. The carbon remaining in M reduced Cr (Ⅵ) of Na2CrO4 borne in the chromium slag to Cr (Ⅲ) in the solid phase reaction, and its thermodynamics and kinetics were studied. The reduction process of Na2CrO4 by carbon produced CO, which was endothermic. Under the experimental condition, the apparent activation energy was 4.41 kJ·mol -1 , the apparent order of reaction for Na2CrO4 was equal to one, and the partial pressure of CO was only 0.22 Pa at 1 330 ℃.展开更多
It is still a formidable challenge to study CH2O + CH3·→ CHO + CH4 reaction in the gas phase by traditional dynamics, because of the large number of freedom degrees for the system. In this paper, direct dynamics...It is still a formidable challenge to study CH2O + CH3·→ CHO + CH4 reaction in the gas phase by traditional dynamics, because of the large number of freedom degrees for the system. In this paper, direct dynamics, in which trajectories were run directly on the DFT potential energy surface, have been applied to the reaction, which gave a direct look in the reaction processes. Two sets of trajectories at different initial orientations of reactants and temperature have been simulated. And the detailed reaction mechanisms have been described.展开更多
A novel in situ reaction system Al Zr O was developed. In situ Al 3Zr and Al 2O 3 particulate reinforced A356 alloy matrix composites have been fabricated by direct melt reaction method. The results show that the maxi...A novel in situ reaction system Al Zr O was developed. In situ Al 3Zr and Al 2O 3 particulate reinforced A356 alloy matrix composites have been fabricated by direct melt reaction method. The results show that the maximum sizes of Al 3Zr and Al 2O 3 particulates synthesized in the system ZrOCl 2 A356 are 1 μm and 3 μm respectively, and they are well distributed in the matrix. The investigation shows that the Al 3Zr crystal is in the shape of polyhedron and rectangle. There is a faceted growth phenomenon on Al 3Zr crystal surface. It is firstly found that the Al 3Zr crystal grows in the mechanism of twinning. The twinning plane is (1 1 4), and the twinning direction is [2 2 1] . The crystal morphology of in situ α Al 2O 3 particulate is rectangle or sphere. Furthermore, (Al 3Zr+Al 2O 3) p/A356 composites have not only higher tensile strength at room temperature (376.2 MPa) but also higher yield strength (319.4 MPa) and higher tensile strength at elevated temperature (200 ℃) than those of the A356 alloy. The dry sliding wear test shows that the wear resistance of the (Al 3Zr+Al 2O 3) p/A356 composites is greatly enhanced with increasing particulate volume fraction.展开更多
基金supported by the Basic Science Research Program through the National Research Foundation of Korea(NRF)the South Korea grant funded by the Korean government(MSIT)(2021R1A4A2000934,2023R1A2C3004336)+1 种基金The computational part of the work was supported by Department of Chemical and Biomolecular Engineering,Institute of Emergent Materials,Sogang University,via NRF Korea grant 2015M3D3A1A01064929a generous supercomputing time from KISTI。
文摘Recycling spent lithium-ion batteries(SLIBs)has become essential to preserve the environment and reclaim vital resources for sustainable development.The typical SLIBs recycling concentrated on separating valuable components had limitations,including high energy consumption and complicated separation processes.This work suggests a safe hydrometallurgical process to recover usable metallic cobalt from depleted LiCoO_(2)batteries by utilizing citric acid as leachant and hydrogen peroxide as an oxidizing agent,with ethanol as a selective precipitating agent.The anode graphite was also recovered and converted to graphene oxide(GO).The above components were directly resynthesized to cobaltintegrated nitrogen-doped graphene(Co@NG).The Co@NG showed a decent activity towards oxygen reduction reaction(ORR)with a half-wave potential of 0.880 V vs.RHE,almost similar to Pt/C(0.888 V vs.RHE)and with an onset potential of 0.92 V vs.RHE.The metal-nitrogen-carbon(Co-N-C)having the highest nitrogen content has decreased the barrier for ORR since the reaction was enhanced for Co@NG-800,as confirmed by density functional theory(DFT)simulations.The Co@NG cathode catalyst coupled with commercial Pt-Ru/C as anode catalyst exhibits excellent performance for direct methanol fuel cell(DMFC)with a peak power density of 34.7 mW cm^(-2)at a discharge current density of120 m A cm^(-2)and decent stability,indicating the promising utilization of spent battery materials in DMFC applications.Besides,lithium was recovered from supernatant as lithium carbonate by coprecipitation process.This work avoids sophisticated elemental separation by utilizing SLIBs for other renewable energy applications,lowering the environmental concerns associated with recycling.
基金supported by the Fund for Shanxi Province Higher Education“1331 Project”for Improving Quality and Efficiency Construction(nuc2021-006)Key Research&Development Plan of Shanxi Province(201903D321059)+1 种基金Scientific Activities of Selected Returned Overseas Professionals in Shanxi Province(20200004)Transformation and Cultivation Projects of Scientific and Technological Achievements in Universities of Shanxi Province Institutions(2020CG040).
文摘In this study,high-gravity intensified heterogeneous catalytic ozonation is utilized for treatment of phenol-containing wastewater,and the kinetics of the direct reaction between ozone and phenol in the presence of excess tertiary butanol(TBA)is investigated.It is revealed that the direct reaction between ozone and phenol in the rotating packed bed(RPB)follows the pseudo-first-order kinetics with a reaction rate constant higher than that in the conventional bubbling reactor(BR).Under different conditions of temperature,initial pH,high-gravity factor,and gaseous ozone concentration,the apparent reaction rate constant varies in the range of 0.0160–0.115 min-1.An empirical power-exponential model is established to characterize the effects of these parameters on the direct reaction between ozone and phenol by high-gravity intensified heterogeneous catalytic ozonation.
基金supported by the National Natural Science Foundations of China(22150410340)the Chongqing Science&Technology Commission(catc2018jcyjax0582)。
文摘Methanol cross-over effects from the anode to the cathode are important parameters for reducing catalytic performance in direct methanol fuel cells.A promising candidate catalyst for the cathode in direct methanol fuel cells must have excellent activity toward oxygen reduction reaction and resistance to methanol oxidation reaction.This review focuses on the methanol tolerant noble metal-based electrocatalysts,including platinum and palladium-based alloys,noble metal–carbon based composites,transition metal-based catalysts,carbon-based metal catalysts,and metal-free catalysts.The understanding of the correlation between the activity and the synthesis method,electrolyte environment and stability issues are highlighted.For the transition metal-based catalyst,their activity,stability and methanol tolerance in direct methanol fuel cells and comparisons with those of platinum are particularly discussed.Finally,strategies to enhance the methanol tolerance and hinder the generation of mixed potential in direct methanol fuel cells are also presented.This review provides a perspective for future developments for the scientist in selecting suitable methanol tolerate catalyst for oxygen reduction reaction and designing high-performance practical direct methanol fuel cells.
基金the National Key R&D Program of China(2016YFA0202804)the Strategic Priority Research Program of the Chinese Academy of Sciences(XDB17020400)+2 种基金the National Natural Science Foundation of China(Nos.21506204,21476226)Dalian Science Foundation for Distinguished Young Scholars(2016RJ04)the Youth Innovation Promotion Association CAS for financial support
文摘The oxide-zeolite process provides a promising way for one-step production of aromatics from syngas,whereas the reasons for the dramatic effect of intimacy between oxide and zeolite in the composite catalyst on the product selectivity are still unclear. In order to explore the optimal intimacy and the essential influence factors, ZnCrOxcombined with ZSM-5 are employed to prepare the composite catalysts with different distances between the two components by changing the mixing methods. An aromatic selectivity of 74%(with CO conversion to be 16%) is achieved by the composite catalyst when the intimacy is in the range of nanometer. A so-called ‘iterative reactions’ mechanism of intermediates over oxides is then proposed and studied: the intermediate chemical can undergo a hydrogenation reaction on oxide.So the shorter the intermediates stay on oxide, the more of chance for C-C coupling takes place on zeolite to form aromatics. Moreover, the aero-environments of reaction is found to impact on the extent of iterative reaction as well. Therefore, when the intimacy between the two components changes, the extent of iterative reactions vary, resulting in alteration of product distribution. This work provides new insight in understanding the mechanisms during the complex process of OX-ZEO composite catalysis and sheds light to the design of a high-yield catalyst for synthetization of aromatics from syngas.
基金supported by a research grant from the Office of the Vice-Chancellor for Research and Development,University of the Philippines-Diliman(Grant No.101007 PNSE)to W.L.R.and H.J.S
文摘Objective:To compare the sensitivity and specificity of direct fecal smear microscopy,culture,and polymerase chain reaction in the detection of Blastocystis sp.in human stool.Methods:Human stool samples were collected from a community in San Isidro,Rodriguez,Rizal,Philippines.These samples were subjected to direct fecal smear microscopy,culture and polymerase chain reaction to detect the presence of Blastocystis sp.Results:Of the 110 stool samples collected,28(25%)were detected positive for the presence of Blastocystis sp.by two or more tests.Culture method detected the highest number of Blastocystis-positive stool samples(n=36),followed by PCR of DNA extracted from culture(n=26),PCR of DNA extracted from stool(n=10),and direct fecal smear(n=9).Compared to culture,the sensitivity of the other detection methods were 66.7%for PCR from culture and 19.4%for both PCR from stool and direct fecal smear.Specificity of the methods was high,with PCR from culture and direct fecal smear having97.3%,while PCR from stool at 95.9%.Conclusions:In this study,in vitro culture is the best method for detecting Blastocystis sp.in human stool samples.
基金supported by the National Natural Science Foundation of China(61601501 61502521)
文摘Test of consistency is critical for the analytic hierarchy process(AHP) methodology. When a pairwise comparison matrix(PCM) fails the consistency test, the decision maker(DM) needs to make revisions. The state of the art focuses on changing a single entry or creating a new matrix based on the original inconsistent matrix so that the modified matrix can satisfy the consistency requirement. However, we have noticed that the reason that causes inconsistency is not only numerical inconsistency, but also logical inconsistency, which may play a more important role in the whole inconsistency. Therefore, to realize satisfactory consistency, first of all, we should change some entries that form a directed circuit to make the matrix logically consistent, and then adjust other entries within acceptable deviations to make the matrix numerically consistent while preserving most of the original comparison information. In this paper, we firstly present some definitions and theories, based on which two effective methods are provided to identify directed circuits. Four optimization models are proposed to adjust the original inconsistent matrix. Finally, illustrative examples and comparison studies show the effectiveness and feasibility of our method.
基金Supported by the National Natural Science Foundation of China(91434117,21776077)the Shanghai Rising-Star Program(17QA1401200)+1 种基金the Program for Professor of Special Appointment(Eastern Scholar)at Shanghai Institutions of Higher Learningthe Open Project of State Key Laboratory of Chemical Engineering(SKL-Che-15C03).
文摘Direct propylene epoxidation with H2 and O2,an attractive process to produce propylene oxide(PO),has a potential explosion danger due to the coexistence of flammable gases(i.e.,C3 H6 and H2)and oxidizer(i.e.,O2).The unknown explosion limits of the multi-component feed gas mixture make it difficult to optimize the reaction process under safe operation conditions.In this work,a distribution method is proposed and verified to be effective by comparing estimated and experimental explosion limits of more than 200 kinds of flammable gas mixture.Then,it is employed to estimate the explosion limits of the feed gas mixture,some results of which are also validated by the classic Le Chatelier’s Rule and flammable resistance method.Based on the estimated explosion limits,process optimization is carried out using commercially high and inherently safe reactant concentrations to enhance reaction performance.The promising results are directly obtained through the interface called gOPT in gPROMS only by using a simple,easy-constructed and mature packed-bed reactor,such as the PO yield of 13.3%,PO selectivity of 85.1%and outlet PO fraction of 1.8%.These results can be rationalized by indepth analyses and discussion about the effects of the decision variables on the operation safety and reaction performance.The insights revealed here could shed new light on the process development of the PO production based on the estimation of the explosion limits of the multi-component feed gas mixture containing flammable gase s,inert gas and O2,followed by process optimization.
基金the National Natural Science Foundation of China(No.21878190)National Key R&D Program of China(2018YFB0605700)for financial support。
文摘Amine-based carbon dioxide(CO2)capture is still limited by high desorption energy consumption.Fixing CO2 into carbonate is a safer and more permanent method.In this work,calcium oxide(CaO)is introduced to perform chemical desorption instead of thermal desorption on 1,8-diazabicyclo[5.4.0]undec-7-ene(DBU)aqueous solution after CO2 absorption.The X-ray diffraction(XRD)patterns of solid products show the formation of calcite calcium carbonate(CaCO3),which prove the feasibility of this method.The effects of reaction temperature,reaction time and Ca2+/CO32-molar ratios on the related reactions in CO2 absorption-mineralization process and CaCO3 precipitation are discussed,and purer CaCO3 is obtained by ultrasonic treatment.The CaCO3 content can be increased to 95.8%and the CO2 desorption ratio can achieve 80%by 30 min ultrasonic dispersion treatment under the conditions(40℃,180 min,Ca2+/CO32-molar ratio=1.0).After five cycles,DBU aqueous solution shows stable CO2 absorption and mineralization ability.Fourier transform infrared spectroscopy(FT-IR)spectra of the reaction process also indicate the regeneration of the solvent.Compared with thermal desorption,this process is exothermic,almost without no additional heat.
基金The financial support provided by the Project of National Natural Science Foundation of China(21822809&21978256)the Fundamental Research Funds for the Central Universitiesthe Foundation of State Key Laboratory of High-efficiency Utilization of Coal and Green Chemical Engineering(Grant No.2018-K23)are gratefully acknowledged.
文摘Ethane steam cracking process in an industrial reactor was investigated.An one-demsional(1D)steady-state model was developed firstly by using an improved molecular reaction scheme and was then simulated in Aspen Plus.A comparison of model results with industrial data and previously reported results showed that the model can predict the process kinetics more accurately.In addition,the validated model was used to study the effects of different process variables,including coil outlet temperature(COT),steam-to-ethane ratio and residence time on ethane conversion,ethylene selectivity,products yields,and coking rate.Finally,steady-state optimization was conducted to the operation of industrial reactor.The COT and steam-to-ethane ratio were taken as decision variables to maximize the annual operational profit.
基金This research was funded by General Project of the National Natural Science Foundation of China(No.81673601)the Key Research&Development Plan of Shanxi Province(Social Development Project,No.201603D3112002)Cultivate Scientific Research Excellence Programs of Higher Education Institutions in Shanxi(No.2019KJ032).
文摘Background:Traditional Chinese medicines are usually processed before they are used for clinical treatment.This is done in a way associated with the Maillard reaction.Methods:Based on the Maillard reaction,this paper analyzed the degree of processing of rehmannia root(Rehmanniae radix)relative to the dynamic variation rules of Maillard reaction index parameters,including pH,A420,amino acids,and 5-hydroxymethylfurfural.Furthermore,this study introduced thermal analysis techniques and pyrolysis kinetics to assess the influence of the correlation between processing raw rehmannia root and the Maillard reaction during carbonization.It then went through the whole process of transforming the raw material to end-product in order to explain the scientific connotation of processing it.Results:The results showed that each time rehmannia root was processed,its pH value and amino acid content decreased,while the A420 value and 5-HMF increased.Processing with wine shows a significant difference in these experimental indexes.The position and intensity of the maximum thermal weight loss rate peak of processed rehmannia root at different degrees of processing are different.Comprehensive quantitative 221±0.2°C for processed rehmannia root carbonization was the processing temperature limit.Moreover,the kinetic solution verified that the activation energy corresponding to the carbonization temperature was close to the maximum value of the activation energy of the whole carbonization process,and the optimal mechanism function was g(α)=((1−α)−1/3−1)2.Conclusion:The Maillard reaction occurred during the processing of rehmannia root mixed with carbonization.With each increase of the number of steaming and drying cycles involved in the processing,the level of Maillard reaction increased significantly.The wine-steaming method had a significant effect on the quality of the processed product.
基金supported by the National Key Research and Development Program of China(Grant No.2018YFB2001002)。
文摘Based on the theory of first-order reaction kinetics,a thermal reaction kinetic model in integral form has been derive.To make the model more applicable,the effects of time and the conversion degree on the reaction rate parameters were considered.Two types of undetermined functions were used to compensate for the intrinsic variation of the reaction rate,and two types of correction methods are provided.The model was explained and verified using published experimental data of different polymer thermal reaction systems,and its effectiveness and wide adaptability were confirmed.For the given kinetic model,only one parameter needs to be determined.The proposed empirical model is expected to be used in the numerical simulation of polymer thermal reaction process.
基金the support of National Natural Science Foundation of China(21878019)Beijing Natural Science Foundation(2182063)。
文摘As an important form of reactors for gas/liquid/solid catalytic reaction,trickle bed reactors (TBRs) are widely applied in petroleum industry,biochemical,fine chemical and pharmaceutical industries because of their flexibility,simplicity of operation and high throughput.However,TBRs also show inefficient production and hot pots caused by non-uniform fluid distribution and incomplete wetting of the catalyst,which limit their further application in chemical industry.Also,process intensification in TBRs is necessary as the decrease in quality of processed crude oil,caused by increased exploitation depths,and more restrictive environmental regulations and emission standards for industry,caused by increased environment protection consciousness.In recent years,lots of strategies for process intensification in TBRs have been proposed to improve reaction performance to meet the current and future demands of chemical industry from the environmental and economic perspective.This article summarizes the recent progress in techniques for intensifying gas/liquid/solid reaction in TBRs and application of intensified TBRs in petroleum industry.
基金Item Sponsored by National Natural Science Foundation of China (50234040)
文摘M, a particular industrial waste, was selected to detoxify chromium slag at a high temperature. The carbon remaining in M reduced Cr (Ⅵ) of Na2CrO4 borne in the chromium slag to Cr (Ⅲ) in the solid phase reaction, and its thermodynamics and kinetics were studied. The reduction process of Na2CrO4 by carbon produced CO, which was endothermic. Under the experimental condition, the apparent activation energy was 4.41 kJ·mol -1 , the apparent order of reaction for Na2CrO4 was equal to one, and the partial pressure of CO was only 0.22 Pa at 1 330 ℃.
文摘It is still a formidable challenge to study CH2O + CH3·→ CHO + CH4 reaction in the gas phase by traditional dynamics, because of the large number of freedom degrees for the system. In this paper, direct dynamics, in which trajectories were run directly on the DFT potential energy surface, have been applied to the reaction, which gave a direct look in the reaction processes. Two sets of trajectories at different initial orientations of reactants and temperature have been simulated. And the detailed reaction mechanisms have been described.
文摘A novel in situ reaction system Al Zr O was developed. In situ Al 3Zr and Al 2O 3 particulate reinforced A356 alloy matrix composites have been fabricated by direct melt reaction method. The results show that the maximum sizes of Al 3Zr and Al 2O 3 particulates synthesized in the system ZrOCl 2 A356 are 1 μm and 3 μm respectively, and they are well distributed in the matrix. The investigation shows that the Al 3Zr crystal is in the shape of polyhedron and rectangle. There is a faceted growth phenomenon on Al 3Zr crystal surface. It is firstly found that the Al 3Zr crystal grows in the mechanism of twinning. The twinning plane is (1 1 4), and the twinning direction is [2 2 1] . The crystal morphology of in situ α Al 2O 3 particulate is rectangle or sphere. Furthermore, (Al 3Zr+Al 2O 3) p/A356 composites have not only higher tensile strength at room temperature (376.2 MPa) but also higher yield strength (319.4 MPa) and higher tensile strength at elevated temperature (200 ℃) than those of the A356 alloy. The dry sliding wear test shows that the wear resistance of the (Al 3Zr+Al 2O 3) p/A356 composites is greatly enhanced with increasing particulate volume fraction.