In this study,we examine the effects of various shapes of nanoparticles in a steady flow of hybrid nanofluids between two stretchable rotating disks.The steady flow of hybrid nanofluids with transformer oil as the bas...In this study,we examine the effects of various shapes of nanoparticles in a steady flow of hybrid nanofluids between two stretchable rotating disks.The steady flow of hybrid nanofluids with transformer oil as the base fluid and Fe_(3)O_(4)+TiO_(2)as the hybrid nanofluid is considered.Several shapes of Fe_(3)O_(4)+TiO_(2)hybrid nanofluids,including sphere,brick,blade,cylinder,and platelet,are studied.Every shape exists in the same volume of a nanoparticle.The leading equations(partial differential equations(PDEs))are transformed to the nonlinear ordinary differential equations(ODEs)with the help of similarity transformations.The system of equations takes the form of ODEs depending on the boundary conditions,whose solutions are computed numerically by the bvp4c MATLAB solver.The outputs are compared with the previous findings,and an intriguing pattern is discovered,such that the tangential velocity is increased for the rotation parameter,while it is decreased by the stretching values because of the lower disk.For the reaction rate parameter,the concentration boundary layer becomes shorter,and the activation energy component increases the rate at which mass transfers come to the higher disk but have the opposite effect on the bottom disk.The ranges of various parameters taken into account are Pr=6.2,Re=2,M=1.0,φ_(1)=φ_(2)=0.03,K=0.5,S=-0.1,Br=0.3,Sc=2.0,α_(1)=0.2,γ=0.1,E_(n)=2.0,and q=1.0,and the rotation factor K is within the range of 0 to 1.展开更多
Objective: Increasing the emergence of Metallo-β-lactamase (MBL) producing gram-negative bacteria and their dexterous horizontal transmission demands rapid and accurate detection. This study was conducted to determin...Objective: Increasing the emergence of Metallo-β-lactamase (MBL) producing gram-negative bacteria and their dexterous horizontal transmission demands rapid and accurate detection. This study was conducted to determine a suitable method to promptly detect MBL-producing gram-negative bacteria. Methods: A total of 103 gram-negative bacteria were identified from various clinical samples at a tertiary care hospital in Dhaka city. MBL producers were detected by two phenotypic methods, the Disk Potentiation Test (DPT) and the Double Disk Synergy Test (DDST) based on β-lactam chelator combinations where EDTA/SMA has been used as an inhibitor and Imipenem, Ceftazidime as substrates. Results: 103 isolates which were identified as Escherichia coli spp, Klebsiella spp, Pseudomonas spp, Acinetobacter spp, Proteus spp, Providencia spp were found to be multidrug-resistant in antibiogram test. Isolates showed complete resistance (100%) to Imipenem, Meropenem, and Amoxiclav. The highest carbapenem-resistant etiological agents were Acinetobacter spp 40 (38.8%) followed by Pseudomonas spp 27 (26.2%), Klebsiella spp 26 (25.2%), Escherichia coli 8 (7.8%), Proteus spp 1 (1%) and Providencia spp 1 (1%). DPT method detected significantly (p = 0.000009) a higher number of MBL-producers (Imipenem with 0.5 M EDTA n = 61, 59.2% & Ceftazidime with 0.5 M EDTA n = 56, 54.4%) compared to the DDST method (Imipenem -0.5 M EDTA n = 43, 41.7%, Imipenem – SMA n = 38, 36.9% & Ceftazidime -0.5 M EDTA n = 15, 14.6%). Conclusion: Pieces of evidence suggest that DPT is a more sensitive method than DDST and could be recommended for identifying MBL-producing bacteria in Bangladeshi hospitals for the proper management of patients, to reduce time constraints and treatment costs.展开更多
Inspired by the eccentricity design of self-driven disks,we propose a computational model to study the remarkable behavior of this kind of active matter via Langevin dynamics simulations.We pay attention to the effect...Inspired by the eccentricity design of self-driven disks,we propose a computational model to study the remarkable behavior of this kind of active matter via Langevin dynamics simulations.We pay attention to the effect of rotational friction coefficient and rotational noise on the phase behavior.A homogeneous system without rotational noise exhibits a sharp discontinuous transition of orientational order from an isotropic to a polar state with the increase of rotational friction coefficient.When there is rotational noise,the transition becomes continuous.The formation of polar state originates from the effective alignment effect due to the mutual coupling of the positional and orientational degrees of freedom of each disk.The rotational noise could weaken the alignment effect and cause the large spatial density inhomogeneity,while the translational noise homogenizes the system.Our model makes further conceptual progress on how the microscopic interaction among self-driven agents yields effective alignment.展开更多
This article presents the stresses at the center of a Brazilian disk(BD)for transversely isotropic rocks.It is shown that the solution of stresses at the center of an anisotropic disk is a function of the disk radius ...This article presents the stresses at the center of a Brazilian disk(BD)for transversely isotropic rocks.It is shown that the solution of stresses at the center of an anisotropic disk is a function of the disk radius and the magnitude of applied load,as well as the material orientation with respect to the load axis and two dimensionless ratios with specific physical meanings and limitations.These two dimensionless parameters are the ratios of Young’s modulus and apparent shear modulus,although the ratio of apparent shear modulus will be eliminated if the Saint-Venant assumption is considered.Considerable finite element simulations are carried out to find the stresses at the disk center concerning the material orientation and the two dimensionless parameters.Also,an approximate formula obtained from analytical results,previously proposed in the literature for solving the tensile and compressive stresses at the disk center,is re-written and simplified based on these new definitions.The results of the approximate formula fitted to the analytical results are compared to those obtained from numerical solutions,suggesting a good agreement between the numerical and analytical methods.An approximate equation for the shear stress at the disk center is also formulated based on the numerical results.Finally,the influence of the assumptions for simplification of the proposed formula for the tensile,compressive,and shear stresses at the disk center is discussed,and simple and practical equations are proposed as estimations for the stresses at the center of the BD specimen for low to moderate anisotropic rocks.For highly anisotropic rocks,the reference plots can be used for more accuracy.展开更多
The Galactic black hole candidate MAXI J0637-430 was first discovered by MAXI/GSC on 2019 November 2.We study the spectral properties of MAXI J0637-430 by using the archived NuSTAR data and Swift/XRT data.After fittin...The Galactic black hole candidate MAXI J0637-430 was first discovered by MAXI/GSC on 2019 November 2.We study the spectral properties of MAXI J0637-430 by using the archived NuSTAR data and Swift/XRT data.After fitting the eight spectra by using a disk component and a powerlaw component model with absorption,we select the spectra with relatively strong reflection components for detailed X-ray reflection spectroscopy.Using the most state-of-art reflection model,relxillCp,the spectral fitting measures a black hole spin a_(*)>0.72 and the inclination angle of the accretion disk i=46.1_(-5.3)^(+4.0)degrees,at a 90%confidence level.In addition,the fitting results show an extreme supersolar iron abundance.Combined with the fitting results of reflection model reflionx_hd,we consider that this unphysical iron abundance may be caused by a very high-density accretion disk(n_(e)>2.34×10^(21)cm^(-3))or a strong Fe K_(α) emission line.The soft excess is found in the soft state spectral fitting results,which may be an extra free-free heating effect caused by high density of the accretion disk.Finally,we discuss the robustness of black hole spin obtained by X-ray reflection spectroscopy.The result of relatively high spin is self-consistent with broadened Fe K_(α) line.Iron abundance and disk density have no effect on the spin results.展开更多
The deformations and stresses of a rotating cylindrical hollow disk made of incompressible functionally-graded hyper-elastic material are theoretically analyzed based on the finite elasticity theory.The hyper-elastic ...The deformations and stresses of a rotating cylindrical hollow disk made of incompressible functionally-graded hyper-elastic material are theoretically analyzed based on the finite elasticity theory.The hyper-elastic material is described by a new micro-macro transition model.Specially,the material shear modulus and density are assumed to be a function with a power law form through the radial direction,while the material inhomogeneity is thus reflected on the power index m.The integral forms of the stretches and stress components are obtained.With the obtained complicated integral forms,the composite trapezoidal rule is utilized to derive the analytical solutions,and the explicit solutions for both the stretches and the stress components are numerically obtained.By comparing the results with two classic models,the superiority of the model in our work is demonstrated.Then,the distributions of the stretches and normalized stress components are discussed in detail under the effects of m.The results indicate that the material inhomogeneity and the rotating angular velocity have significant effects on the distributions of the normalized radial and hoop stress components and the stretches.We believe that by appropriately choosing the material inhomogeneity and configuration parameters,the functionally-graded material(FGM)hyper-elastic hollow cylindrical disk can be designed to meet some unique requirements in the application fields,e.g.,soft robotics,medical devices,and conventional aerospace and mechanical industries.展开更多
Let D■R2 be a Jordan domain,D*=R2\D,the exterior of D.In this article,the authors obtained the following results:(1)If D is a John disk,then D is an outer linearly locally connected domain;(2)If D* is a John disk,the...Let D■R2 be a Jordan domain,D*=R2\D,the exterior of D.In this article,the authors obtained the following results:(1)If D is a John disk,then D is an outer linearly locally connected domain;(2)If D* is a John disk,then D is an inner linearly locally connected domain;(3)A homeomorphism f:R 2 →R 2 is a quasiconformal mapping if and only if f(D)is a John disk for any John disk D■R 2 ;and(4)If D is a bounded quasidisk,then D is a John disk,and there exists an unbounded quasidisk which is not a John disk.展开更多
可插入插槽的闪存卡包括miniSD、SD、TrarlsFlash、MultimediaCard、RS-MMC、Metnor、Stick Duo和Memory Stick PRO Duo，手机增加了存储量，集多功能于一身，这些闪存卡就是开启这些功能的钥匙。这些小型闪存卡由开发闪存卡的Sar1Disk...可插入插槽的闪存卡包括miniSD、SD、TrarlsFlash、MultimediaCard、RS-MMC、Metnor、Stick Duo和Memory Stick PRO Duo，手机增加了存储量，集多功能于一身，这些闪存卡就是开启这些功能的钥匙。这些小型闪存卡由开发闪存卡的Sar1Disk公司推出，它也是全球唯一一家制造和销售现今多款受欢迎闪存卡的公司。展开更多
A new specimen geometry-the double edge-cracked Brazilian disk and a relevant fracture analysis byweight function method are proposed for the investigation of rock fracture caused by compression-shear loading. Notonly...A new specimen geometry-the double edge-cracked Brazilian disk and a relevant fracture analysis byweight function method are proposed for the investigation of rock fracture caused by compression-shear loading. Notonly can the mixed mode fracture with any ratio of KⅠ/KⅡ be achieved, but also the pure mode Ⅱ crack extensioncan be obtained. The combined mode fracture analysis for this geometry shows that diametral compression in the far-field can induce a compression-shear stress state in the singular stress field ahead of crack tips. Experimental investi-gations conducted on marble specimens show that the pure mode Ⅱ crack extension can be obtained when the dimen-sionless crack length a＞0.7 and the inclined crack angle 5°≤ψ≤40°. Normalized mode Ⅰ and mode Ⅱ stress inten-sity factors decrease from -0.45 and 2.47 at ψ=5° to -1.65 and 1.52 at ψ=40°, respectively. The strains at threepoints of specimen are also measured in order to investigate the influence of stress singularity on initial crack exten-sion. The results show that the principal orientations of strain at three points are very stable in the loading process.The derived formulae are quite explicit, and the specimen geometry is easy to fabricate and convenient to achieve thepure mode Ⅱ crack extension. Therefore, it can hopefully be used to obtain mode Ⅱ fracture toughness of rock.展开更多
文摘In this study,we examine the effects of various shapes of nanoparticles in a steady flow of hybrid nanofluids between two stretchable rotating disks.The steady flow of hybrid nanofluids with transformer oil as the base fluid and Fe_(3)O_(4)+TiO_(2)as the hybrid nanofluid is considered.Several shapes of Fe_(3)O_(4)+TiO_(2)hybrid nanofluids,including sphere,brick,blade,cylinder,and platelet,are studied.Every shape exists in the same volume of a nanoparticle.The leading equations(partial differential equations(PDEs))are transformed to the nonlinear ordinary differential equations(ODEs)with the help of similarity transformations.The system of equations takes the form of ODEs depending on the boundary conditions,whose solutions are computed numerically by the bvp4c MATLAB solver.The outputs are compared with the previous findings,and an intriguing pattern is discovered,such that the tangential velocity is increased for the rotation parameter,while it is decreased by the stretching values because of the lower disk.For the reaction rate parameter,the concentration boundary layer becomes shorter,and the activation energy component increases the rate at which mass transfers come to the higher disk but have the opposite effect on the bottom disk.The ranges of various parameters taken into account are Pr=6.2,Re=2,M=1.0,φ_(1)=φ_(2)=0.03,K=0.5,S=-0.1,Br=0.3,Sc=2.0,α_(1)=0.2,γ=0.1,E_(n)=2.0,and q=1.0,and the rotation factor K is within the range of 0 to 1.
文摘Objective: Increasing the emergence of Metallo-β-lactamase (MBL) producing gram-negative bacteria and their dexterous horizontal transmission demands rapid and accurate detection. This study was conducted to determine a suitable method to promptly detect MBL-producing gram-negative bacteria. Methods: A total of 103 gram-negative bacteria were identified from various clinical samples at a tertiary care hospital in Dhaka city. MBL producers were detected by two phenotypic methods, the Disk Potentiation Test (DPT) and the Double Disk Synergy Test (DDST) based on β-lactam chelator combinations where EDTA/SMA has been used as an inhibitor and Imipenem, Ceftazidime as substrates. Results: 103 isolates which were identified as Escherichia coli spp, Klebsiella spp, Pseudomonas spp, Acinetobacter spp, Proteus spp, Providencia spp were found to be multidrug-resistant in antibiogram test. Isolates showed complete resistance (100%) to Imipenem, Meropenem, and Amoxiclav. The highest carbapenem-resistant etiological agents were Acinetobacter spp 40 (38.8%) followed by Pseudomonas spp 27 (26.2%), Klebsiella spp 26 (25.2%), Escherichia coli 8 (7.8%), Proteus spp 1 (1%) and Providencia spp 1 (1%). DPT method detected significantly (p = 0.000009) a higher number of MBL-producers (Imipenem with 0.5 M EDTA n = 61, 59.2% & Ceftazidime with 0.5 M EDTA n = 56, 54.4%) compared to the DDST method (Imipenem -0.5 M EDTA n = 43, 41.7%, Imipenem – SMA n = 38, 36.9% & Ceftazidime -0.5 M EDTA n = 15, 14.6%). Conclusion: Pieces of evidence suggest that DPT is a more sensitive method than DDST and could be recommended for identifying MBL-producing bacteria in Bangladeshi hospitals for the proper management of patients, to reduce time constraints and treatment costs.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.21674078,21774091,and 21574096).
文摘Inspired by the eccentricity design of self-driven disks,we propose a computational model to study the remarkable behavior of this kind of active matter via Langevin dynamics simulations.We pay attention to the effect of rotational friction coefficient and rotational noise on the phase behavior.A homogeneous system without rotational noise exhibits a sharp discontinuous transition of orientational order from an isotropic to a polar state with the increase of rotational friction coefficient.When there is rotational noise,the transition becomes continuous.The formation of polar state originates from the effective alignment effect due to the mutual coupling of the positional and orientational degrees of freedom of each disk.The rotational noise could weaken the alignment effect and cause the large spatial density inhomogeneity,while the translational noise homogenizes the system.Our model makes further conceptual progress on how the microscopic interaction among self-driven agents yields effective alignment.
基金partially supported by the Institute of Geology of the Czech Academy of Sciences project RVO 67985831.
文摘This article presents the stresses at the center of a Brazilian disk(BD)for transversely isotropic rocks.It is shown that the solution of stresses at the center of an anisotropic disk is a function of the disk radius and the magnitude of applied load,as well as the material orientation with respect to the load axis and two dimensionless ratios with specific physical meanings and limitations.These two dimensionless parameters are the ratios of Young’s modulus and apparent shear modulus,although the ratio of apparent shear modulus will be eliminated if the Saint-Venant assumption is considered.Considerable finite element simulations are carried out to find the stresses at the disk center concerning the material orientation and the two dimensionless parameters.Also,an approximate formula obtained from analytical results,previously proposed in the literature for solving the tensile and compressive stresses at the disk center,is re-written and simplified based on these new definitions.The results of the approximate formula fitted to the analytical results are compared to those obtained from numerical solutions,suggesting a good agreement between the numerical and analytical methods.An approximate equation for the shear stress at the disk center is also formulated based on the numerical results.Finally,the influence of the assumptions for simplification of the proposed formula for the tensile,compressive,and shear stresses at the disk center is discussed,and simple and practical equations are proposed as estimations for the stresses at the center of the BD specimen for low to moderate anisotropic rocks.For highly anisotropic rocks,the reference plots can be used for more accuracy.
基金supported by the National Natural Science Foundation of China(grant No.U12273058)。
文摘The Galactic black hole candidate MAXI J0637-430 was first discovered by MAXI/GSC on 2019 November 2.We study the spectral properties of MAXI J0637-430 by using the archived NuSTAR data and Swift/XRT data.After fitting the eight spectra by using a disk component and a powerlaw component model with absorption,we select the spectra with relatively strong reflection components for detailed X-ray reflection spectroscopy.Using the most state-of-art reflection model,relxillCp,the spectral fitting measures a black hole spin a_(*)>0.72 and the inclination angle of the accretion disk i=46.1_(-5.3)^(+4.0)degrees,at a 90%confidence level.In addition,the fitting results show an extreme supersolar iron abundance.Combined with the fitting results of reflection model reflionx_hd,we consider that this unphysical iron abundance may be caused by a very high-density accretion disk(n_(e)>2.34×10^(21)cm^(-3))or a strong Fe K_(α) emission line.The soft excess is found in the soft state spectral fitting results,which may be an extra free-free heating effect caused by high density of the accretion disk.Finally,we discuss the robustness of black hole spin obtained by X-ray reflection spectroscopy.The result of relatively high spin is self-consistent with broadened Fe K_(α) line.Iron abundance and disk density have no effect on the spin results.
基金supported by the National Natural Science Foundation of China(No.11972144)the Shanxi Province Specialized Research and Development Breakthrough in Key Core and Generic Technologies(Key Research and Development Program)(No.2020XXX017)the Fundamental Research Program of Shanxi Province of China(No.202203021211134)。
文摘The deformations and stresses of a rotating cylindrical hollow disk made of incompressible functionally-graded hyper-elastic material are theoretically analyzed based on the finite elasticity theory.The hyper-elastic material is described by a new micro-macro transition model.Specially,the material shear modulus and density are assumed to be a function with a power law form through the radial direction,while the material inhomogeneity is thus reflected on the power index m.The integral forms of the stretches and stress components are obtained.With the obtained complicated integral forms,the composite trapezoidal rule is utilized to derive the analytical solutions,and the explicit solutions for both the stretches and the stress components are numerically obtained.By comparing the results with two classic models,the superiority of the model in our work is demonstrated.Then,the distributions of the stretches and normalized stress components are discussed in detail under the effects of m.The results indicate that the material inhomogeneity and the rotating angular velocity have significant effects on the distributions of the normalized radial and hoop stress components and the stretches.We believe that by appropriately choosing the material inhomogeneity and configuration parameters,the functionally-graded material(FGM)hyper-elastic hollow cylindrical disk can be designed to meet some unique requirements in the application fields,e.g.,soft robotics,medical devices,and conventional aerospace and mechanical industries.
基金Sponsored by the Foundation of Pre-973 Program of China under grant2006CB708304the National NSFC under grant 10771195the NSF of Zhejiang Province under grant Y607128
文摘Let D■R2 be a Jordan domain,D*=R2\D,the exterior of D.In this article,the authors obtained the following results:(1)If D is a John disk,then D is an outer linearly locally connected domain;(2)If D* is a John disk,then D is an inner linearly locally connected domain;(3)A homeomorphism f:R 2 →R 2 is a quasiconformal mapping if and only if f(D)is a John disk for any John disk D■R 2 ;and(4)If D is a bounded quasidisk,then D is a John disk,and there exists an unbounded quasidisk which is not a John disk.
文摘可插入插槽的闪存卡包括miniSD、SD、TrarlsFlash、MultimediaCard、RS-MMC、Metnor、Stick Duo和Memory Stick PRO Duo，手机增加了存储量，集多功能于一身，这些闪存卡就是开启这些功能的钥匙。这些小型闪存卡由开发闪存卡的Sar1Disk公司推出，它也是全球唯一一家制造和销售现今多款受欢迎闪存卡的公司。
基金Project (50274074) supported by the National Natural Science Foundation of China
文摘A new specimen geometry-the double edge-cracked Brazilian disk and a relevant fracture analysis byweight function method are proposed for the investigation of rock fracture caused by compression-shear loading. Notonly can the mixed mode fracture with any ratio of KⅠ/KⅡ be achieved, but also the pure mode Ⅱ crack extensioncan be obtained. The combined mode fracture analysis for this geometry shows that diametral compression in the far-field can induce a compression-shear stress state in the singular stress field ahead of crack tips. Experimental investi-gations conducted on marble specimens show that the pure mode Ⅱ crack extension can be obtained when the dimen-sionless crack length a＞0.7 and the inclined crack angle 5°≤ψ≤40°. Normalized mode Ⅰ and mode Ⅱ stress inten-sity factors decrease from -0.45 and 2.47 at ψ=5° to -1.65 and 1.52 at ψ=40°, respectively. The strains at threepoints of specimen are also measured in order to investigate the influence of stress singularity on initial crack exten-sion. The results show that the principal orientations of strain at three points are very stable in the loading process.The derived formulae are quite explicit, and the specimen geometry is easy to fabricate and convenient to achieve thepure mode Ⅱ crack extension. Therefore, it can hopefully be used to obtain mode Ⅱ fracture toughness of rock.
