P-and SV-wave dispersion and attenuation have been extensively investigated in saturated poroelastic media with aligned fractures.However,there are few existing models that incorporate the multiple wave attenuation me...P-and SV-wave dispersion and attenuation have been extensively investigated in saturated poroelastic media with aligned fractures.However,there are few existing models that incorporate the multiple wave attenuation mechanisms from the microscopic scale to the macroscopic scale.Hence,in this work,we developed a unified model to incorporate the wave attenuation mechanisms at different scales,which includes the microscopic squirt flow between the microcracks and pores,the mesoscopic wave-induced fluid flow between fractures and background(FB-WIFF),and the macroscopic Biot's global flow and elastic scattering(ES)from the fractures.Using Tang's modified Biot's theory and the mixed-boundary conditions,we derived the exact frequency-dependent solutions of the scattering problem for a single penny-shaped fracture with oblique incident P-and SV-waves.We then developed theoretical models for a set of aligned fractures and randomly oriented fractures using the Foldy approximation.The results indicated that microcrack squirt flow considerably influences the dispersion and attenuation of P-and SV-wave velocities.The coupling effects of microcrack squirt flow with the FB-WIFF and ES of fractures cause much higher velocity dispersion and attenuation for P waves than for SV waves.Randomly oriented fractures substantially reduce the attenuation caused by the FB-WIFF and ES,particularly for the ES attenuation of SV waves.Through a comparison with existing models in the limiting cases and previous experimental measurements,we validated our model.展开更多
We theoretically investigate the propagation characteristics of spin waves in skyrmion-based magnonic crystals. It is found that the dispersion relation can be manipulated by strains through magneto-elastic coupling. ...We theoretically investigate the propagation characteristics of spin waves in skyrmion-based magnonic crystals. It is found that the dispersion relation can be manipulated by strains through magneto-elastic coupling. Especially, the allowed bands and forbidden bands in dispersion relations shift to higher frequency with strain changing from compressive to tensile,while shifting to lower frequency with strain changing from tensile to compressive. We also confirm that the spin wave with specific frequency can pass the magnonic crystal or be blocked by tuning the strains. The result provides an advanced platform for studying the tunable skyrmion-based spin wave devices.展开更多
Knowledge about the seismic elastic modulus dispersion,and associated attenuation,in fluid-saturated rocks is essential for better interpretation of seismic observations taken as part of hydrocarbon identification and...Knowledge about the seismic elastic modulus dispersion,and associated attenuation,in fluid-saturated rocks is essential for better interpretation of seismic observations taken as part of hydrocarbon identification and time-lapse seismic surveillance of both conventional and unconventional reservoir and overburden performances.A Seismic Elastic Moduli Module has been developed,based on the forced-oscillations method,to experimentally investigate the frequency dependence of Young's modulus and Poisson's ratio,as well as the inferred attenuation,of cylindrical samples under different confining pressure conditions.Calibration with three standard samples showed that the measured elastic moduli were consistent with the published data,indicating that the new apparatus can operate reliably over a wide frequency range of f∈[1-2000,10^(6)]Hz.The Young's modulus and Poisson's ratio of the shale and the tight sandstone samples were measured under axial stress oscillations to assess the frequency-and pressure-dependent effects.Under dry condition,both samples appear to be nearly frequency independent,with weak pressure dependence for the shale and significant pressure dependence for the sandstone.In particular,it was found that the tight sandstone with complex pore microstructure exhibited apparent dispersion and attenuation under brine or glycerin saturation conditions,the levels of which were strongly influenced by the increased effective pressure.In addition,the measured Young's moduli results were compared with the theoretical predictions from a scaled poroelastic model with a reasonably good agreement,revealing that the combined fluid flow mechanisms at both mesoscopic and microscopic scales possibly responsible for the measured dispersion.展开更多
The main objective of this paper is to investigate the influence of inertia of nonlinear springs on the dispersion behavior of discrete monoatomic chains with lumped and distributed masses.The developed model can repr...The main objective of this paper is to investigate the influence of inertia of nonlinear springs on the dispersion behavior of discrete monoatomic chains with lumped and distributed masses.The developed model can represent the wave propagation problem in a non-homogeneous material consisting of heavy inclusions embedded in a matrix.The inclusions are idealized by lumped masses,and the matrix between adjacent inclusions is modeled by a nonlinear spring with distributed masses.Additionally,the model is capable of depicting the wave propagation in bi-material bars,wherein the first material is represented by a rigid particle and the second one is represented by a nonlinear spring with distributed masses.The discrete model of the nonlinear monoatomic chain with lumped and distributed masses is first considered,and a closed-form expression of the dispersion relation is obtained by the second-order Lindstedt-Poincare method(LPM).Next,a continuum model for the nonlinear monoatomic chain is derived directly from its discrete lattice model by a suitable continualization technique.The subsequent use of the second-order method of multiple scales(MMS)facilitates the derivation of the corresponding nonlinear dispersion relation in a closed form.The novelties of the present study consist of(i)considering the inertia of nonlinear springs on the dispersion behavior of the discrete mass-spring chains;(ii)developing the second-order LPM for the wave propagation in the discrete chains;and(iii)deriving a continuum model for the nonlinear monoatomic chains with lumped and distributed masses.Finally,a parametric study is conducted to examine the effects of the design parameters and the distributed spring mass on the nonlinear dispersion relations and phase velocities obtained from both the discrete and continuum models.These parameters include the ratio of the spring mass to the lumped mass,the nonlinear stiffness coefficient of the spring,and the wave amplitude.展开更多
A trigger system is typically employed in active seismic testing to trigger and synchronize multichannel surface wave data acquisition.The effect of the trigger system on the dispersion image of surface waves is empir...A trigger system is typically employed in active seismic testing to trigger and synchronize multichannel surface wave data acquisition.The effect of the trigger system on the dispersion image of surface waves is empirically known to be negligible,however,theoretical explanation regarding the effect of the trigger system is insufficient.This study systematically examines the theory for surface wave dispersion analysis and proves that the effect of the trigger system on a dispersion image is negligible via a solid theoretical explanation.Subsequently,based on the new theoretical explanation,an alternative method that uses only the relative phase difference between sensors to extract dispersion characteristics with better conceptual clarity is proposed.Two active surface wave testing cases are considered to validate the theory and method.The results indicate that(1)an accurate trigger system is not necessary for surface wave data acquisition,and(2)it is unnecessary to assume that the impact point is the generation point of the surface waves for the experimental dispersion analysis.展开更多
Buildings with large open spaces in which chemicals are handled are often exposed to the risk of explosions.Computational fluid dynamics is a useful and convenient way to investigate contaminant dispersion in such lar...Buildings with large open spaces in which chemicals are handled are often exposed to the risk of explosions.Computational fluid dynamics is a useful and convenient way to investigate contaminant dispersion in such large spaces.The turbulent Schmidt number(Sct)concept has typically been used in this regard,and most studies have adopted a default value.We studied the concentration distribution for sulfur hexafluoride(SF6)assuming different emission rates and considering the effect of Sct.Then we examined the same problem for a light gas by assuming hydrogen gas(H2)as the contaminant.When SF6 was considered as the contaminant gas,a variation in the emission rate completely changed the concentration distribution.When the emission rate was low,the gravitational effect did not take place.For both low and high emission rates,an increase in Sct accelerated the transport rate of SF6.In contrast,for H2 as the contaminant gas,a larger Sct could induce a decrease in the H2 transport rate.展开更多
The liver is in charge of distributing and regulating the movement of qi throughout the whole body,coordinating the transportation and transformation of the internal organs in the middle part of the body,promoting the...The liver is in charge of distributing and regulating the movement of qi throughout the whole body,coordinating the transportation and transformation of the internal organs in the middle part of the body,promoting the biochemical circulation of qi,blood,and body fluids,and regulating emotions.Liver dysfunction can disrupt the transportation and transformation of qi,blood,and body fluids,causing phlegm turbidity,blood stasis,and other unwanted symptoms.Poor regulation of emotion further aggravates the accumulation of pathological substances,resulting in the obstruction of heart vessels,and ultimately coronary heart disease(CHD).Through regulating lipid metabolism,inflammatory reaction,vasoactive substances,platelet function,neuroendocrine,and other factors,liver controlling dispersing qi plays a comprehensive role in the prognosis of atherosclerosis,the primary cause of CHD.Therefore,it is recommended to treat CHD from the perspective of liver-controlling dispersion.展开更多
Amorphous solid dispersion(ASD)is one of the most effective approaches for delivering poorly soluble drugs.In ASDs,polymeric materials serve as the carriers in which the drugs are dispersed at the molecular level.To p...Amorphous solid dispersion(ASD)is one of the most effective approaches for delivering poorly soluble drugs.In ASDs,polymeric materials serve as the carriers in which the drugs are dispersed at the molecular level.To prepare the solid dispersions,there are many polymers with various physicochemical and thermochemical characteristics available for use in ASD formulations.Polymer selection is of great importance because it influences the stability,solubility and dissolution rates,manufacturing process,and bioavailability of the ASD.This review article provides a comprehensive overview of ASDs from the perspectives of physicochemical characteristics of polymers,formulation designs and preparation methods.Furthermore,considerations of safety and regulatory requirements along with the studies recommended for characterizing and evaluating polymeric carriers are briefly discussed.展开更多
As the poor dispersion of oily collectors and the inferior hydrophobicity of the mineral surface, the lowrank coal has an unsatisfactory flotation performance when using traditional collectors. In this paper, an ionic...As the poor dispersion of oily collectors and the inferior hydrophobicity of the mineral surface, the lowrank coal has an unsatisfactory flotation performance when using traditional collectors. In this paper, an ionic liquid microemulsion was used as a collector to enhance its floatability. Flotation test results demonstrated the microemulsion collector exhibited a superior collecting ability. A satisfactory separation performance of 78.66% combustible material recovery was obtained with the microemulsion collector consumption of 6 kg/t, which was equivalent to the flotation performance of diesel at a dosage of25 kg/t. The dispersion behavior of the microemulsion collector was investigated using the CryogenicTransmission Electron Microscopy. The interaction mechanism of the microemulsion collector on enhancing the low-rank coal flotation was elucidated through the Zeta potential and contact angle measurements, the Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy analysis.The microemulsion collector exhibited superior dispersibility, which was dispersed into positively charged oil droplets with an average size of 160.21 nm in the pulp. Furthermore, the nano-oil droplets could be more efficiently adsorbed on the low-rank coal surface through electrostatic attraction, resulting in the improvement of its hydrophobicity. Thus, the microemulsion collector shows great application potential in improving the flotation performance of low-rank coal.展开更多
Dispersion and attenuation analysis can be used to determine formation anisotropy induced by fractures,or stresses.In this paper,we propose a nonparametric spectrum estimation method to get phase dispersion characteri...Dispersion and attenuation analysis can be used to determine formation anisotropy induced by fractures,or stresses.In this paper,we propose a nonparametric spectrum estimation method to get phase dispersion characteristics and attenuation coefficient.By designing an appropriate vector filter,phase velocity,attenuation coefficient and amplitude can be inverted from the waveform recorded by the receiver array.Performance analysis of this algorithm is compared with Extended Prony Method(EPM)and Forward and Backward Matrix Pencil(FBMP)method.Based on the analysis results,the proposed method is capable of achieving high resolution and precision as the parametric spectrum estimation methods.At the meantime,it also keeps high stability as the other nonparametric spectrum estimation methods.At last,applications to synthetic waveforms modeled using finite difference method and real data show its efficiency.The real data processing results show that the P-wave attenuation log is more sensitive to oil formation compared to S-wave;and the S-wave attenuation log is more sensitive to shale formation compared to P-wave.展开更多
Non-spherical particles exist widely in natural and industrial fluid systems and the motions of nonspherical particles are significantly different from that of spherical particles.In this paper,a simplified model of n...Non-spherical particles exist widely in natural and industrial fluid systems and the motions of nonspherical particles are significantly different from that of spherical particles.In this paper,a simplified model of non-spherical particles considering particle drag correction,lift,and rotation was established.Based on the Eulerian-Lagrangian simulation,the dispersion characteristics of spherical and nonspherical particles with different Stokes numbers in a high-speed turbulent jet were analyzed and compared considering the effect of particle rotation.The results show that,the differences in particle dispersion and radial velocity fluctuation between non-spherical particles and spherical particles in the jet are significant,especially when Stokes number is large.Moreover,the effects of different type of forces on the dispersion of non-spherical particles and spherical particles were compared in detail,which revealed that the change of the Magnus force caused by the increase in the angular velocity of non-spherical particles plays a dominant role in the differences of particle dispersion.展开更多
The effect of the inlet gas pressure,supplementary gas pressure and nozzle channel dispersion angle on the pre-breakup behavior of Ti-6Al-4V(TC4)discontinuous droplets during EIGA was investigated by combining numeric...The effect of the inlet gas pressure,supplementary gas pressure and nozzle channel dispersion angle on the pre-breakup behavior of Ti-6Al-4V(TC4)discontinuous droplets during EIGA was investigated by combining numerical simulation with experiments.The results show that the axial velocity at the recirculation zone before the stagnation location was first increased and decreased then increased significantly after the peak value,while the pressure of the recirculation zone increased with the increase in inlet pressure.With the supplementary pressure increasing,the velocity magnitude and range of the recirculation zone gradually decreased.As the dispersion angle of the nozzle channel increased,the pre-breakup efficiency of droplets gradually decreased,but the adhesion phenomenon of droplets on the inner wall surface of the nozzle channel(IWSNC)gradually weakened.Under the inlet pressure of 4 MPa,a supplementary pressure of 0.05 MPa,and the dispersion angle of 15°,the uniform and spherical TC4 powders with diameter of 70μm were prepared,which was consistent with the simulation results.The optimized process parameters is a balance between the size of the pre-atomized particles and the back-spraying and bonding phenomenons of droplets.展开更多
Prediction of seismic attenuation and dispersion that are inherently sensitive to hydraulic and elastic properties of the medium of interest in the presence of mesoscopic fractures and pores,is of great interest in th...Prediction of seismic attenuation and dispersion that are inherently sensitive to hydraulic and elastic properties of the medium of interest in the presence of mesoscopic fractures and pores,is of great interest in the characterization of fractured formations.This has been very difficult,however,considering that stress interactions between fractures and pores,related to their spatial distributions,tend to play a crucial role on affecting overall dynamic elastic properties that are largely unexplored.We thus choose to quantitatively investigate frequency-dependent P-wave characteristics in fractured porous rocks at the scale of a representative sample using a numerical scale-up procedure via performing finite element modelling.Based on 2-D numerical quasi-static experiments,effects of fracture and fluid properties on energy dissipation in response to wave-induced fluid flow at the mesoscopic scale are quantified via solving Biot's equations of consolidation.We show that numerical results are sensitive to some key characteristics of probed synthetic rocks containing unconnected and connected fractures,demonstrating that connectivity,aperture and inclination of fractures as well as fracture infills exhibit strong impacts on the two manifestations of WIFF mechanisms in the connected scenario,and on resulting total wave attenuation and phase velocity.This,in turn,illustrates the importance of these two WIFF mechanisms in fractured rocks and thus,a deeper understanding of them may eventually allow for a better characterization of fracture systems using seismic methods.Moreover,this presented work combines rock physics predictions with seismic numerical simulations in frequency domain to illustrate the sensitivity of seismic signatures on the monitoring of an idealized geologic CO_(2) sequestration in fractured reservoirs.The simulation demonstrates that these two WIFF mechanisms can strongly modify seismic records and hence,indicating that incorporating the two energy dissipation mechanisms in the geophysical interpretation can potentially improving the monitoring and surveying of fluid variations in fractured formations.展开更多
The knowledge of two-phase cloud dispersion mechanism from HLG(hazardous liquefied gas) release is the prerequisite for accurate assessment and precise rescue of such accidents. In this paper, an experiment of two-pha...The knowledge of two-phase cloud dispersion mechanism from HLG(hazardous liquefied gas) release is the prerequisite for accurate assessment and precise rescue of such accidents. In this paper, an experiment of two-phase cloud dispersion from liquefied CO_(2) hole release is performed. The source terms, such as vapour mass fraction, release velocity and mean droplet diameter, are calculated based on thermodynamic theory. Taking phase transition of CO_(2) droplets to gas into account, CFD(computational fluid dynamics) model for two-phase cloud dispersion is established. The predicted cloud temperatures at the downstream agree well with the experimental data, with the maximum relative error of 5.8% and average relative error of 2.3%. The consequence distances in the downstream direction and in the crosswise direction calculated through two-phase model are larger than those through single-phase model,with the relative differences of 57.8% and 53.6% respectively. CO_(2) concentration calculated by twophase model is smaller in the vicinity of release hole, and larger beyond 0.135 m downstream. A smaller leakage rate results in a lower CO_(2) concentration and a higher cloud temperature.展开更多
Lateral dispersion significantly directs the assessment of rockfall hazard and design of countermeasures. In the present study, the dependence of lateral dispersion on different controlling factors has been systematic...Lateral dispersion significantly directs the assessment of rockfall hazard and design of countermeasures. In the present study, the dependence of lateral dispersion on different controlling factors has been systematically evaluated by performing laboratory tests using three different rock block types, namely circular block, and two types of elliptical block. The three types of rock block are released onto an inclined surface with the identical initial status. Parallel, anti-parallel, and oblique impact tests set at slope angles of 22.5° and 45°are conducted to study the block-slope interaction of rockfall. Lateral dispersion of rockfall is less influenced by the block shape for the oblique impact, while the post-impact behaviors are greatly affected by the block shape. The key factors influencing the deviation of the post-impact trajectory direction are the slope angle (θ) and direction difference (Δφ). An empirical model is then developed to characterize the deviation distribution of lateral dispersion by 5th and 95th percentile values with the inclusion of the two key factors. Linear function can be used to describe the 5th percentile boundary, while hyperbolic function is good for the 95th percentile boundary, which need to be validated by field tests in the subsequent research.展开更多
The rubber-containing waste materials have been widely used to improve the engineering properties of soils in recent years.Among others,granular rubbers are utilized in various ways to increase the bearing capacity an...The rubber-containing waste materials have been widely used to improve the engineering properties of soils in recent years.Among others,granular rubbers are utilized in various ways to increase the bearing capacity and shear strength and to reduce the settlement and liquefaction potential of soils.The granular rubbers have many advantages such as temperature resistance,flexibility,tear-resistance,non-slip,and thermal and electrical insulation.This study presents the distribution characteristics of five different types of clayey soils with different engineering properties containing waste rubber particles(WRPs).On the other hand,determining and controlling the dispersion characteristics of clayey soils is two significant engineering problems.The study aims to solve these two remarkable and problematic issues in an eco-friendly and safe way.The role of WRP treatment in the investigation of soil dispersion behavior,which can cause dangerous problems such as piping,erosion,and dispersion,reflects the original and different perspectives of this study.Within this scope,geotechnical parameters of the clayey soils were determined.Subsequently,pinhole test,crumb test,double hydrometer test,and scanning electron microscopy(SEM)analysis were performed on the Na-activated bentonite,refined ball clay,Ukrainian kaolin,Avanos kaolin,and Afyon clay samples with different percentages of WRPs(0%,5%,10%,and 15%).Consequently,Avanos and Ukrainian kaolin clays gave the most limited response to the dispersion behavior with the addition of WRP.Also,WRP treatment on the ball clay and bentonite samples showed limited efficiency.Afyon clay,which was defined as dispersive by the three tests that determined its dispersion potential,showed 3 level changes in the pinhole tests and 2 level changes in the crumb tests,and gave the most effective results in terms of WRP efficiency.展开更多
The identification of hydrocarbons using seismic methods is critical in the prediction of shale oil res-ervoirs.However,delineating shales of high oil saturation is challenging owing to the similarity in the elastic p...The identification of hydrocarbons using seismic methods is critical in the prediction of shale oil res-ervoirs.However,delineating shales of high oil saturation is challenging owing to the similarity in the elastic properties of oil-and water-bearing shales.The complexity of the organic matter properties associated with kerogen and hydrocarbon further complicates the characterization of shale oil reservoirs using seismic methods.Nevertheless,the inelastic shale properties associated with oil saturation can enable the utilization of velocity dispersion for hydrocarbon identification in shales.In this study,a seismic inversion scheme based on the fluid dispersion attribute was proposed for the estimation of hydrocarbon enrichment.In the proposed approach,the conventional frequency-dependent inversion scheme was extended by incorporating the PP-wave reflection coefficient presented in terms of the effective fluid bulk modulus.A rock physics model for shale oil reservoirs was constructed to describe the relationship between hydrocarbon saturation and shale inelasticity.According to the modeling results,the hydrocarbon sensitivity of the frequency-dependent effective fluid bulk modulus is superior to the traditional compressional wave velocity dispersion of shales.Quantitative analysis of the inversion re-sults based on synthetics also reveals that the proposed approach identifies the oil saturation and related hydrocarbon enrichment better than the above-mentioned conventional approach.Meanwhile,in real data applications,actual drilling results validate the superiority of the proposed fluid dispersion attribute as a useful hydrocarbon indicator in shale oil reservoirs.展开更多
The potential difference between positive and negative ions was utilized to improve the homogenized dispersion of nanoscale Al_(2)O_(3) whiskers in Mg matrix composites.The Mg powders were decorated with sodium dodecy...The potential difference between positive and negative ions was utilized to improve the homogenized dispersion of nanoscale Al_(2)O_(3) whiskers in Mg matrix composites.The Mg powders were decorated with sodium dodecylbenzene sulfonate(C_(18)H_(29)NaO_(3)S,SDBS)and were introduced to the cathode group on their surface.The Al_(2)O_(3) whiskers were modified by the cetyl trimethyl ammonium bromide(C_(19)H_(42)BrN,CTAB)and were featured in the anode group.The suitable contents of CTAB and SDBS,the application atmosphere,and the type of solvents were investigated.Dispersion results showed that adding 2wt%SDBS into Mg powders and adding 2wt%CTAB into Al_(2)O_(3) whiskers pro-moted the formation of more uniformly mixed composite powders,compared to those of conventional ball milling via scanning electron micro-scopy(SEM)analysis.Meanwhile,the calculated results derived from first-principle calculations also demonstrated the stronger cohesion between Al_(2)O_(3) whisker reinforcements and Mg matrix than undecorated composite powders.After preparation by powder metallurgy,the mor-phology,grain size,hardness,and standard deviation coefficient of composites were analyzed to evaluate the dispersed efficiency.The results indicated that the modification of homogenized dispersed Al_(2)O_(3) whiskers in composites contributed to the refinement of 26%in grain size and the improvement of 20%in hardness compared with pure Mg,and the reduction of 32.5%in the standard deviation coefficient of hardness compared with the ball-milling sample.展开更多
Oil dispersible suspension concentrates are safe,green,and environmentally friendly formulations.Problems such as layering,pasting,and bottoming are frequently encountered during the production,storage,and transportat...Oil dispersible suspension concentrates are safe,green,and environmentally friendly formulations.Problems such as layering,pasting,and bottoming are frequently encountered during the production,storage,and transportation process.Polyisobutylene succinimide functions as a dispersant and exhibits great potential to improve the physical stability of the oil dispersible suspension concentrate.From a microscopic perspective,the sorption characteristics of the polyisobutylene succinimide dispersant T151 on penoxsulam particle surfaces were comprehensively evaluated with XPS,FTIR,and SEM.The T151 adsorption procedure complied with a pseudo-second-order kinetic adsorption model,and it was a kind of physical sorption with an Ea of 22.57 kJ⋅mol^(−1).The T151 sorption model was consistent with the Langmuir isotherm.The adsorption process was spontaneous and followed by an entropy increase.TheΔH^(θ)of dispersant T151 on the surface of penoxsulam particles was 31.59 kJ⋅mol^(−1).The adsorption procedure was endothermic,and the primary force was hydrogen bonding.The XPS results showed that the F and S electronic peaks at the penoxsulam interface decreased,and that the C electronic peak increased significantly after the adsorption of dispersant T151,indicating the adsorption on the surface of penoxsulam particles.The results of this study provide a vital theoretical basis for the application of polyisobutylene succinimide dispersants in oil dispersible suspension systems.展开更多
BACKGROUND Myocardial ischemia and ST-elevation myocardial infarction(STEMI)increase QT dispersion(QTD)and corrected QT dispersion(QTcD),and are also associated with ventricular arrhythmia.AIM To evaluate the effects ...BACKGROUND Myocardial ischemia and ST-elevation myocardial infarction(STEMI)increase QT dispersion(QTD)and corrected QT dispersion(QTcD),and are also associated with ventricular arrhythmia.AIM To evaluate the effects of reperfusion strategy[primary percutaneous coronary intervention(PPCI)or fibrinolytic therapy]on QTD and QTcD in STEMI patients and assess the impact of the chosen strategy on the occurrence of in-hospital arrhythmia.METHODS This prospective,observational,multicenter study included 240 patients admitted with STEMI who were treated with either PPCI(group I)or fibrinolytic therapy(group II).QTD and QTcD were measured on admission and 24 hr after reperfusion,and patients were observed to detect in-hospital arrhythmia.RESULTS There were significant reductions in QTD and QTcD from admission to 24 hr in both group I and group II patients.QTD and QTcD were found to be shorter in group I patients at 24 hr than those in group II(53±19 msec vs 60±18 msec,P=0.005 and 60±21 msec vs 69+22 msec,P=0.003,respectively).The occurrence of in-hospital arrhythmia was significantly more frequent in group II than in group I(25 patients,20.8%vs 8 patients,6.7%,P=0.001).Furthermore,QTD and QTcD were higher in patients with in-hospital arrhythmia than those without(P=0.001 and P=0.02,respectively).CONCLUSION In STEMI patients,PPCI and fibrinolytic therapy effectively reduced QTD and QTcD,with a higher observed reduction using PPCI.PPCI was associated with a lower incidence of in-hospital arrhythmia than fibrinolytic therapy.In addition,QTD and QTcD were shorter in patients not experiencing in-hospital arrhythmia than those with arrhythmia.展开更多
基金This work was supported by the Laoshan National Laboratory Science and Technology Innovation Project(No.LSKJ202203407)the National Natural Science Foundation of China(Grant Nos.42174145,41821002,42274146)+1 种基金Guangdong Provincial Key Laboratory of Geophysical High-resolution Imaging Technology(2022B1212010002)Shenzhen Stable Support Plan Program for Higher Education Institutions(20220815110144003).
文摘P-and SV-wave dispersion and attenuation have been extensively investigated in saturated poroelastic media with aligned fractures.However,there are few existing models that incorporate the multiple wave attenuation mechanisms from the microscopic scale to the macroscopic scale.Hence,in this work,we developed a unified model to incorporate the wave attenuation mechanisms at different scales,which includes the microscopic squirt flow between the microcracks and pores,the mesoscopic wave-induced fluid flow between fractures and background(FB-WIFF),and the macroscopic Biot's global flow and elastic scattering(ES)from the fractures.Using Tang's modified Biot's theory and the mixed-boundary conditions,we derived the exact frequency-dependent solutions of the scattering problem for a single penny-shaped fracture with oblique incident P-and SV-waves.We then developed theoretical models for a set of aligned fractures and randomly oriented fractures using the Foldy approximation.The results indicated that microcrack squirt flow considerably influences the dispersion and attenuation of P-and SV-wave velocities.The coupling effects of microcrack squirt flow with the FB-WIFF and ES of fractures cause much higher velocity dispersion and attenuation for P waves than for SV waves.Randomly oriented fractures substantially reduce the attenuation caused by the FB-WIFF and ES,particularly for the ES attenuation of SV waves.Through a comparison with existing models in the limiting cases and previous experimental measurements,we validated our model.
文摘We theoretically investigate the propagation characteristics of spin waves in skyrmion-based magnonic crystals. It is found that the dispersion relation can be manipulated by strains through magneto-elastic coupling. Especially, the allowed bands and forbidden bands in dispersion relations shift to higher frequency with strain changing from compressive to tensile,while shifting to lower frequency with strain changing from tensile to compressive. We also confirm that the spin wave with specific frequency can pass the magnonic crystal or be blocked by tuning the strains. The result provides an advanced platform for studying the tunable skyrmion-based spin wave devices.
基金The authors would like to acknowledge financial support from NSFC Basic Research Program on Deep Petroleum Resource Accumulation and Key Engineering Technologies(U19B6003-04-03)National Natural Science Foundation of China(41930425)+2 种基金Beijing Natural Science Foundation(8222073),R&D Department of China National Petroleum Corporation(Investigations on fundamental experiments and advanced theoretical methods in geophysical prospecting applications,2022DQ0604-01)Scientific Research and Technology Development Project of PetroChina(2021DJ1206)National Key Research and Development Program of China(2018YFA0702504).
文摘Knowledge about the seismic elastic modulus dispersion,and associated attenuation,in fluid-saturated rocks is essential for better interpretation of seismic observations taken as part of hydrocarbon identification and time-lapse seismic surveillance of both conventional and unconventional reservoir and overburden performances.A Seismic Elastic Moduli Module has been developed,based on the forced-oscillations method,to experimentally investigate the frequency dependence of Young's modulus and Poisson's ratio,as well as the inferred attenuation,of cylindrical samples under different confining pressure conditions.Calibration with three standard samples showed that the measured elastic moduli were consistent with the published data,indicating that the new apparatus can operate reliably over a wide frequency range of f∈[1-2000,10^(6)]Hz.The Young's modulus and Poisson's ratio of the shale and the tight sandstone samples were measured under axial stress oscillations to assess the frequency-and pressure-dependent effects.Under dry condition,both samples appear to be nearly frequency independent,with weak pressure dependence for the shale and significant pressure dependence for the sandstone.In particular,it was found that the tight sandstone with complex pore microstructure exhibited apparent dispersion and attenuation under brine or glycerin saturation conditions,the levels of which were strongly influenced by the increased effective pressure.In addition,the measured Young's moduli results were compared with the theoretical predictions from a scaled poroelastic model with a reasonably good agreement,revealing that the combined fluid flow mechanisms at both mesoscopic and microscopic scales possibly responsible for the measured dispersion.
基金the support of Texas A&M University at Qatar for the 2022 Sixth Cycle Seed Grant Project。
文摘The main objective of this paper is to investigate the influence of inertia of nonlinear springs on the dispersion behavior of discrete monoatomic chains with lumped and distributed masses.The developed model can represent the wave propagation problem in a non-homogeneous material consisting of heavy inclusions embedded in a matrix.The inclusions are idealized by lumped masses,and the matrix between adjacent inclusions is modeled by a nonlinear spring with distributed masses.Additionally,the model is capable of depicting the wave propagation in bi-material bars,wherein the first material is represented by a rigid particle and the second one is represented by a nonlinear spring with distributed masses.The discrete model of the nonlinear monoatomic chain with lumped and distributed masses is first considered,and a closed-form expression of the dispersion relation is obtained by the second-order Lindstedt-Poincare method(LPM).Next,a continuum model for the nonlinear monoatomic chain is derived directly from its discrete lattice model by a suitable continualization technique.The subsequent use of the second-order method of multiple scales(MMS)facilitates the derivation of the corresponding nonlinear dispersion relation in a closed form.The novelties of the present study consist of(i)considering the inertia of nonlinear springs on the dispersion behavior of the discrete mass-spring chains;(ii)developing the second-order LPM for the wave propagation in the discrete chains;and(iii)deriving a continuum model for the nonlinear monoatomic chains with lumped and distributed masses.Finally,a parametric study is conducted to examine the effects of the design parameters and the distributed spring mass on the nonlinear dispersion relations and phase velocities obtained from both the discrete and continuum models.These parameters include the ratio of the spring mass to the lumped mass,the nonlinear stiffness coefficient of the spring,and the wave amplitude.
基金Natural Science Foundation of Hubei Province of China for Distinguished Young Scholars (2023AFA099)Natural Science Foundation of Hubei Province of China for Key Projects (Innovation Group) (2023AFA030)National Natural Science Foundation of China (52178471)。
文摘A trigger system is typically employed in active seismic testing to trigger and synchronize multichannel surface wave data acquisition.The effect of the trigger system on the dispersion image of surface waves is empirically known to be negligible,however,theoretical explanation regarding the effect of the trigger system is insufficient.This study systematically examines the theory for surface wave dispersion analysis and proves that the effect of the trigger system on a dispersion image is negligible via a solid theoretical explanation.Subsequently,based on the new theoretical explanation,an alternative method that uses only the relative phase difference between sensors to extract dispersion characteristics with better conceptual clarity is proposed.Two active surface wave testing cases are considered to validate the theory and method.The results indicate that(1)an accurate trigger system is not necessary for surface wave data acquisition,and(2)it is unnecessary to assume that the impact point is the generation point of the surface waves for the experimental dispersion analysis.
基金funded by the National Natural Science Foundation of China and the Machinery Industry Innovation Platform Construction Project of China Machinery Industry Federation,Grant Numbers 52378103 and 2019SA-10-07.
文摘Buildings with large open spaces in which chemicals are handled are often exposed to the risk of explosions.Computational fluid dynamics is a useful and convenient way to investigate contaminant dispersion in such large spaces.The turbulent Schmidt number(Sct)concept has typically been used in this regard,and most studies have adopted a default value.We studied the concentration distribution for sulfur hexafluoride(SF6)assuming different emission rates and considering the effect of Sct.Then we examined the same problem for a light gas by assuming hydrogen gas(H2)as the contaminant.When SF6 was considered as the contaminant gas,a variation in the emission rate completely changed the concentration distribution.When the emission rate was low,the gravitational effect did not take place.For both low and high emission rates,an increase in Sct accelerated the transport rate of SF6.In contrast,for H2 as the contaminant gas,a larger Sct could induce a decrease in the H2 transport rate.
文摘The liver is in charge of distributing and regulating the movement of qi throughout the whole body,coordinating the transportation and transformation of the internal organs in the middle part of the body,promoting the biochemical circulation of qi,blood,and body fluids,and regulating emotions.Liver dysfunction can disrupt the transportation and transformation of qi,blood,and body fluids,causing phlegm turbidity,blood stasis,and other unwanted symptoms.Poor regulation of emotion further aggravates the accumulation of pathological substances,resulting in the obstruction of heart vessels,and ultimately coronary heart disease(CHD).Through regulating lipid metabolism,inflammatory reaction,vasoactive substances,platelet function,neuroendocrine,and other factors,liver controlling dispersing qi plays a comprehensive role in the prognosis of atherosclerosis,the primary cause of CHD.Therefore,it is recommended to treat CHD from the perspective of liver-controlling dispersion.
基金the National Natural Science Foundation of China(No.81872813,22108313,82273880)Natural Science Foundation of Jiangsu Province(No.BK 20200573,BK 20200576)+1 种基金Fundamental Research Funds for the Central Universities(No 2632022ZD16)the Scientific Research Fund of Hunan Provincial Education Department(No.22B0820).
文摘Amorphous solid dispersion(ASD)is one of the most effective approaches for delivering poorly soluble drugs.In ASDs,polymeric materials serve as the carriers in which the drugs are dispersed at the molecular level.To prepare the solid dispersions,there are many polymers with various physicochemical and thermochemical characteristics available for use in ASD formulations.Polymer selection is of great importance because it influences the stability,solubility and dissolution rates,manufacturing process,and bioavailability of the ASD.This review article provides a comprehensive overview of ASDs from the perspectives of physicochemical characteristics of polymers,formulation designs and preparation methods.Furthermore,considerations of safety and regulatory requirements along with the studies recommended for characterizing and evaluating polymeric carriers are briefly discussed.
基金financially supported by the National Key Research and Development Program of China (No. 2020YFC1908801)the National Natural Science Foundation of China (No. 52204287)+1 种基金the National Natural Science Foundation of China (No. 52004250)the Key R&D and Promotion Projects in Henan Province (No. 212102310009)。
文摘As the poor dispersion of oily collectors and the inferior hydrophobicity of the mineral surface, the lowrank coal has an unsatisfactory flotation performance when using traditional collectors. In this paper, an ionic liquid microemulsion was used as a collector to enhance its floatability. Flotation test results demonstrated the microemulsion collector exhibited a superior collecting ability. A satisfactory separation performance of 78.66% combustible material recovery was obtained with the microemulsion collector consumption of 6 kg/t, which was equivalent to the flotation performance of diesel at a dosage of25 kg/t. The dispersion behavior of the microemulsion collector was investigated using the CryogenicTransmission Electron Microscopy. The interaction mechanism of the microemulsion collector on enhancing the low-rank coal flotation was elucidated through the Zeta potential and contact angle measurements, the Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy analysis.The microemulsion collector exhibited superior dispersibility, which was dispersed into positively charged oil droplets with an average size of 160.21 nm in the pulp. Furthermore, the nano-oil droplets could be more efficiently adsorbed on the low-rank coal surface through electrostatic attraction, resulting in the improvement of its hydrophobicity. Thus, the microemulsion collector shows great application potential in improving the flotation performance of low-rank coal.
基金This research was supported by the National Natural Science Foundation of China(No.42274141)Science Foundation of China University of Petroleum,Beijing(No.2462020YXZZ007).
文摘Dispersion and attenuation analysis can be used to determine formation anisotropy induced by fractures,or stresses.In this paper,we propose a nonparametric spectrum estimation method to get phase dispersion characteristics and attenuation coefficient.By designing an appropriate vector filter,phase velocity,attenuation coefficient and amplitude can be inverted from the waveform recorded by the receiver array.Performance analysis of this algorithm is compared with Extended Prony Method(EPM)and Forward and Backward Matrix Pencil(FBMP)method.Based on the analysis results,the proposed method is capable of achieving high resolution and precision as the parametric spectrum estimation methods.At the meantime,it also keeps high stability as the other nonparametric spectrum estimation methods.At last,applications to synthetic waveforms modeled using finite difference method and real data show its efficiency.The real data processing results show that the P-wave attenuation log is more sensitive to oil formation compared to S-wave;and the S-wave attenuation log is more sensitive to shale formation compared to P-wave.
基金supported by National Science and Technology Major Project of China(2019-I-0022-0021)Seed fund of Shanxi Research Institute for Clean Energy,Tsinghua Universitythe National Natural Science Foundation of China(51761125011)。
文摘Non-spherical particles exist widely in natural and industrial fluid systems and the motions of nonspherical particles are significantly different from that of spherical particles.In this paper,a simplified model of non-spherical particles considering particle drag correction,lift,and rotation was established.Based on the Eulerian-Lagrangian simulation,the dispersion characteristics of spherical and nonspherical particles with different Stokes numbers in a high-speed turbulent jet were analyzed and compared considering the effect of particle rotation.The results show that,the differences in particle dispersion and radial velocity fluctuation between non-spherical particles and spherical particles in the jet are significant,especially when Stokes number is large.Moreover,the effects of different type of forces on the dispersion of non-spherical particles and spherical particles were compared in detail,which revealed that the change of the Magnus force caused by the increase in the angular velocity of non-spherical particles plays a dominant role in the differences of particle dispersion.
基金Funded by the National Natural Science Foundation of China(No.51627805)the Natural Scienceof Guangdong Province,China(No.2015A030312003)the Science and Technology Research Project of Guangdong Province,China(No.2014B010129003)。
文摘The effect of the inlet gas pressure,supplementary gas pressure and nozzle channel dispersion angle on the pre-breakup behavior of Ti-6Al-4V(TC4)discontinuous droplets during EIGA was investigated by combining numerical simulation with experiments.The results show that the axial velocity at the recirculation zone before the stagnation location was first increased and decreased then increased significantly after the peak value,while the pressure of the recirculation zone increased with the increase in inlet pressure.With the supplementary pressure increasing,the velocity magnitude and range of the recirculation zone gradually decreased.As the dispersion angle of the nozzle channel increased,the pre-breakup efficiency of droplets gradually decreased,but the adhesion phenomenon of droplets on the inner wall surface of the nozzle channel(IWSNC)gradually weakened.Under the inlet pressure of 4 MPa,a supplementary pressure of 0.05 MPa,and the dispersion angle of 15°,the uniform and spherical TC4 powders with diameter of 70μm were prepared,which was consistent with the simulation results.The optimized process parameters is a balance between the size of the pre-atomized particles and the back-spraying and bonding phenomenons of droplets.
文摘Prediction of seismic attenuation and dispersion that are inherently sensitive to hydraulic and elastic properties of the medium of interest in the presence of mesoscopic fractures and pores,is of great interest in the characterization of fractured formations.This has been very difficult,however,considering that stress interactions between fractures and pores,related to their spatial distributions,tend to play a crucial role on affecting overall dynamic elastic properties that are largely unexplored.We thus choose to quantitatively investigate frequency-dependent P-wave characteristics in fractured porous rocks at the scale of a representative sample using a numerical scale-up procedure via performing finite element modelling.Based on 2-D numerical quasi-static experiments,effects of fracture and fluid properties on energy dissipation in response to wave-induced fluid flow at the mesoscopic scale are quantified via solving Biot's equations of consolidation.We show that numerical results are sensitive to some key characteristics of probed synthetic rocks containing unconnected and connected fractures,demonstrating that connectivity,aperture and inclination of fractures as well as fracture infills exhibit strong impacts on the two manifestations of WIFF mechanisms in the connected scenario,and on resulting total wave attenuation and phase velocity.This,in turn,illustrates the importance of these two WIFF mechanisms in fractured rocks and thus,a deeper understanding of them may eventually allow for a better characterization of fracture systems using seismic methods.Moreover,this presented work combines rock physics predictions with seismic numerical simulations in frequency domain to illustrate the sensitivity of seismic signatures on the monitoring of an idealized geologic CO_(2) sequestration in fractured reservoirs.The simulation demonstrates that these two WIFF mechanisms can strongly modify seismic records and hence,indicating that incorporating the two energy dissipation mechanisms in the geophysical interpretation can potentially improving the monitoring and surveying of fluid variations in fractured formations.
基金supported by the Natural Science Foundation of Shandong Province (ZR2021QB144)。
文摘The knowledge of two-phase cloud dispersion mechanism from HLG(hazardous liquefied gas) release is the prerequisite for accurate assessment and precise rescue of such accidents. In this paper, an experiment of two-phase cloud dispersion from liquefied CO_(2) hole release is performed. The source terms, such as vapour mass fraction, release velocity and mean droplet diameter, are calculated based on thermodynamic theory. Taking phase transition of CO_(2) droplets to gas into account, CFD(computational fluid dynamics) model for two-phase cloud dispersion is established. The predicted cloud temperatures at the downstream agree well with the experimental data, with the maximum relative error of 5.8% and average relative error of 2.3%. The consequence distances in the downstream direction and in the crosswise direction calculated through two-phase model are larger than those through single-phase model,with the relative differences of 57.8% and 53.6% respectively. CO_(2) concentration calculated by twophase model is smaller in the vicinity of release hole, and larger beyond 0.135 m downstream. A smaller leakage rate results in a lower CO_(2) concentration and a higher cloud temperature.
基金support from the Natural Science Foundation of China(Grant Nos.42177165 and 41672302)the Opening fund of State Key Laboratory of Geohazard Prevention and Geoenvironment Protection(Chengdu University of Technology)(Grant No.SKLGP2018K018).
文摘Lateral dispersion significantly directs the assessment of rockfall hazard and design of countermeasures. In the present study, the dependence of lateral dispersion on different controlling factors has been systematically evaluated by performing laboratory tests using three different rock block types, namely circular block, and two types of elliptical block. The three types of rock block are released onto an inclined surface with the identical initial status. Parallel, anti-parallel, and oblique impact tests set at slope angles of 22.5° and 45°are conducted to study the block-slope interaction of rockfall. Lateral dispersion of rockfall is less influenced by the block shape for the oblique impact, while the post-impact behaviors are greatly affected by the block shape. The key factors influencing the deviation of the post-impact trajectory direction are the slope angle (θ) and direction difference (Δφ). An empirical model is then developed to characterize the deviation distribution of lateral dispersion by 5th and 95th percentile values with the inclusion of the two key factors. Linear function can be used to describe the 5th percentile boundary, while hyperbolic function is good for the 95th percentile boundary, which need to be validated by field tests in the subsequent research.
基金supported by the Scientific Research Project of Aksaray University(Grant No.BAP-2021-31).
文摘The rubber-containing waste materials have been widely used to improve the engineering properties of soils in recent years.Among others,granular rubbers are utilized in various ways to increase the bearing capacity and shear strength and to reduce the settlement and liquefaction potential of soils.The granular rubbers have many advantages such as temperature resistance,flexibility,tear-resistance,non-slip,and thermal and electrical insulation.This study presents the distribution characteristics of five different types of clayey soils with different engineering properties containing waste rubber particles(WRPs).On the other hand,determining and controlling the dispersion characteristics of clayey soils is two significant engineering problems.The study aims to solve these two remarkable and problematic issues in an eco-friendly and safe way.The role of WRP treatment in the investigation of soil dispersion behavior,which can cause dangerous problems such as piping,erosion,and dispersion,reflects the original and different perspectives of this study.Within this scope,geotechnical parameters of the clayey soils were determined.Subsequently,pinhole test,crumb test,double hydrometer test,and scanning electron microscopy(SEM)analysis were performed on the Na-activated bentonite,refined ball clay,Ukrainian kaolin,Avanos kaolin,and Afyon clay samples with different percentages of WRPs(0%,5%,10%,and 15%).Consequently,Avanos and Ukrainian kaolin clays gave the most limited response to the dispersion behavior with the addition of WRP.Also,WRP treatment on the ball clay and bentonite samples showed limited efficiency.Afyon clay,which was defined as dispersive by the three tests that determined its dispersion potential,showed 3 level changes in the pinhole tests and 2 level changes in the crumb tests,and gave the most effective results in terms of WRP efficiency.
基金supported by the National Natural Science Foundation of China(Grant numbers 42074153 and 42274160)the Open Research Fund of SINOPEC Key Laboratory of Geophysics(Grant number 33550006-20-ZC0699-0006).
文摘The identification of hydrocarbons using seismic methods is critical in the prediction of shale oil res-ervoirs.However,delineating shales of high oil saturation is challenging owing to the similarity in the elastic properties of oil-and water-bearing shales.The complexity of the organic matter properties associated with kerogen and hydrocarbon further complicates the characterization of shale oil reservoirs using seismic methods.Nevertheless,the inelastic shale properties associated with oil saturation can enable the utilization of velocity dispersion for hydrocarbon identification in shales.In this study,a seismic inversion scheme based on the fluid dispersion attribute was proposed for the estimation of hydrocarbon enrichment.In the proposed approach,the conventional frequency-dependent inversion scheme was extended by incorporating the PP-wave reflection coefficient presented in terms of the effective fluid bulk modulus.A rock physics model for shale oil reservoirs was constructed to describe the relationship between hydrocarbon saturation and shale inelasticity.According to the modeling results,the hydrocarbon sensitivity of the frequency-dependent effective fluid bulk modulus is superior to the traditional compressional wave velocity dispersion of shales.Quantitative analysis of the inversion re-sults based on synthetics also reveals that the proposed approach identifies the oil saturation and related hydrocarbon enrichment better than the above-mentioned conventional approach.Meanwhile,in real data applications,actual drilling results validate the superiority of the proposed fluid dispersion attribute as a useful hydrocarbon indicator in shale oil reservoirs.
基金the Fundamental Research Funds for the National Natural Science Foundation of China (Nos. 52101123 and 52004227)the Fundamental Research Funds for the Central Universities-Interdisciplinary Research (No. 2682021ZTPY001)the Dongguan Scitech Commissioner (No. 20211800500102)
文摘The potential difference between positive and negative ions was utilized to improve the homogenized dispersion of nanoscale Al_(2)O_(3) whiskers in Mg matrix composites.The Mg powders were decorated with sodium dodecylbenzene sulfonate(C_(18)H_(29)NaO_(3)S,SDBS)and were introduced to the cathode group on their surface.The Al_(2)O_(3) whiskers were modified by the cetyl trimethyl ammonium bromide(C_(19)H_(42)BrN,CTAB)and were featured in the anode group.The suitable contents of CTAB and SDBS,the application atmosphere,and the type of solvents were investigated.Dispersion results showed that adding 2wt%SDBS into Mg powders and adding 2wt%CTAB into Al_(2)O_(3) whiskers pro-moted the formation of more uniformly mixed composite powders,compared to those of conventional ball milling via scanning electron micro-scopy(SEM)analysis.Meanwhile,the calculated results derived from first-principle calculations also demonstrated the stronger cohesion between Al_(2)O_(3) whisker reinforcements and Mg matrix than undecorated composite powders.After preparation by powder metallurgy,the mor-phology,grain size,hardness,and standard deviation coefficient of composites were analyzed to evaluate the dispersed efficiency.The results indicated that the modification of homogenized dispersed Al_(2)O_(3) whiskers in composites contributed to the refinement of 26%in grain size and the improvement of 20%in hardness compared with pure Mg,and the reduction of 32.5%in the standard deviation coefficient of hardness compared with the ball-milling sample.
基金This work was funded by the Foundation(No.LJ2020030)from the Project of the Education Department of Liaoning Province,China.
文摘Oil dispersible suspension concentrates are safe,green,and environmentally friendly formulations.Problems such as layering,pasting,and bottoming are frequently encountered during the production,storage,and transportation process.Polyisobutylene succinimide functions as a dispersant and exhibits great potential to improve the physical stability of the oil dispersible suspension concentrate.From a microscopic perspective,the sorption characteristics of the polyisobutylene succinimide dispersant T151 on penoxsulam particle surfaces were comprehensively evaluated with XPS,FTIR,and SEM.The T151 adsorption procedure complied with a pseudo-second-order kinetic adsorption model,and it was a kind of physical sorption with an Ea of 22.57 kJ⋅mol^(−1).The T151 sorption model was consistent with the Langmuir isotherm.The adsorption process was spontaneous and followed by an entropy increase.TheΔH^(θ)of dispersant T151 on the surface of penoxsulam particles was 31.59 kJ⋅mol^(−1).The adsorption procedure was endothermic,and the primary force was hydrogen bonding.The XPS results showed that the F and S electronic peaks at the penoxsulam interface decreased,and that the C electronic peak increased significantly after the adsorption of dispersant T151,indicating the adsorption on the surface of penoxsulam particles.The results of this study provide a vital theoretical basis for the application of polyisobutylene succinimide dispersants in oil dispersible suspension systems.
文摘BACKGROUND Myocardial ischemia and ST-elevation myocardial infarction(STEMI)increase QT dispersion(QTD)and corrected QT dispersion(QTcD),and are also associated with ventricular arrhythmia.AIM To evaluate the effects of reperfusion strategy[primary percutaneous coronary intervention(PPCI)or fibrinolytic therapy]on QTD and QTcD in STEMI patients and assess the impact of the chosen strategy on the occurrence of in-hospital arrhythmia.METHODS This prospective,observational,multicenter study included 240 patients admitted with STEMI who were treated with either PPCI(group I)or fibrinolytic therapy(group II).QTD and QTcD were measured on admission and 24 hr after reperfusion,and patients were observed to detect in-hospital arrhythmia.RESULTS There were significant reductions in QTD and QTcD from admission to 24 hr in both group I and group II patients.QTD and QTcD were found to be shorter in group I patients at 24 hr than those in group II(53±19 msec vs 60±18 msec,P=0.005 and 60±21 msec vs 69+22 msec,P=0.003,respectively).The occurrence of in-hospital arrhythmia was significantly more frequent in group II than in group I(25 patients,20.8%vs 8 patients,6.7%,P=0.001).Furthermore,QTD and QTcD were higher in patients with in-hospital arrhythmia than those without(P=0.001 and P=0.02,respectively).CONCLUSION In STEMI patients,PPCI and fibrinolytic therapy effectively reduced QTD and QTcD,with a higher observed reduction using PPCI.PPCI was associated with a lower incidence of in-hospital arrhythmia than fibrinolytic therapy.In addition,QTD and QTcD were shorter in patients not experiencing in-hospital arrhythmia than those with arrhythmia.
