Coherent beam combining(CBC) of fiber laser array is a promising technique to realize high output power while maintaining near diffraction-limited beam quality. To implement CBC, an appropriate phase control feedback ...Coherent beam combining(CBC) of fiber laser array is a promising technique to realize high output power while maintaining near diffraction-limited beam quality. To implement CBC, an appropriate phase control feedback structure should be established to realize phase-locking. In this paper, an innovative internal active phase control CBC fiber laser array based on photodetector array is proposed. The dynamic phase noises of the laser amplifiers are compensated before being emitted into free space. And the static phase difference compensation of emitting laser array is realized by interference measurement based on photodetector array. The principle of the technique is illustrated and corresponding simulations are carried out, and a CBC system with four laser channels is built to verify the technique. When the phase controllers are turned on, the phase deviation of the laser array is less than λ/20, and ~ 95% fringe contrast of the irradiation distribution is obtained. The technique proposed in this paper could provide a reference for the system design of a massive high-power CBC system.展开更多
We study the above-threshold ionization(ATI)process of atoms exposed to fundamental and high-frequency lasers with arbitrary ellipticity by applying the frequency-domain theory.It is found that the angular-resolved AT...We study the above-threshold ionization(ATI)process of atoms exposed to fundamental and high-frequency lasers with arbitrary ellipticity by applying the frequency-domain theory.It is found that the angular-resolved ATI spectrum is sensitive to ellipticities of two lasers and emitted angles of the photoelectron.Particularly for the photon energy of the highfrequency laser more than atomic ionization potential,the width of plateau tends to a constant with increasing ellipticity of fundamental field,the dip structure disappears with increasing ellipticity of the high-frequency field.With the help of the quantum channel analysis,it is shown that the angular distribution depends mainly on the ellipticity of high-frequency field in the case that its frequency is high.Moreover,one can see that the maximal and minimal energies in quantum numerical results are in good agreement with the classical prediction.Our investigation may provide theoretical support for experimental research on polarization control of ionization in elliptically polarized two-color laser fields.展开更多
In the construction of a soft rock tunnel,it is critical to accurately estimate the pre-stressed anchor support parameters for surrounding rock reinforcement;otherwise,engineering disasters may occur.This paper presen...In the construction of a soft rock tunnel,it is critical to accurately estimate the pre-stressed anchor support parameters for surrounding rock reinforcement;otherwise,engineering disasters may occur.This paper presents a support parameter selection method that aims to allow deformation as a control objective,which was applied to the tunnel located in Muzailing Highway,Min County,Dingxi City,Gansu Province,China.Through theoretical analysis,we have identified five factors that influence pre-stressing anchorages.The selection of mechanical parameters for the rock mass was carried out using an inverse analysis method.Compared with the measured data,the maximum displacement error of the numerical simulation results was only 0.07 m.The length of anchor cable,circumferential spacing of anchor cable,longitudinal spacing,and pre-stress index are adopted as the input parameters for the support vector machine neural network model based on particle swarm optimization(PSO-LSSVM).Besides,the vault subsidence and the maximum deformation of surrounding rock are considered as output values(performance indices).The goodness of fit between the predicted values and the simulated values exceeds 0.9.Finally,all support parameters within the acceptable deformation range are calculated.The optimal support variables are derived by considering the construction cost and duration.The field application results show that it is feasible to construct the sample database utilizing the numerical simulation approach by taking the displacement as the control target and using the neural network to specify the appropriate support parameters.展开更多
A novel variable displacement compressor (VDC) for automotive air conditioner (AAC) is introduced, which inherits the advantages of common wobble plate type VDC. It has fewer parts and makes less noise, and instead of...A novel variable displacement compressor (VDC) for automotive air conditioner (AAC) is introduced, which inherits the advantages of common wobble plate type VDC. It has fewer parts and makes less noise, and instead of pneumatic valve the displacement is controlled by electronic control valve. In order to know the control mechanism well and get a good control effect, a mathematical model for the variable displacement mechanism is developed according to the geometrical and kinematical information of the compressor. Using the model, the effect of relevant parameters on variable displace control is estimated. It is helpful to make the optimum decision in the flow control of AAC. As the novel displacement control device, the structure and control rule of electronic control valve is introduced. It can get better effect than the conventional pneumatic valves. And by using this new electronic control device, the optimum systemic control of AAC is available.展开更多
In this paper, the dynamics of coherent laser control of potassium atoms is studied by using the time-dependent multilevel approach （TDMA）. The calculation results of population transfer are presented with different...In this paper, the dynamics of coherent laser control of potassium atoms is studied by using the time-dependent multilevel approach （TDMA）. The calculation results of population transfer are presented with different laser fields. The results show that the population can be transferred to target state completely by a specially designed laser field.展开更多
Steel matrix composites(SMCs)reinforced with WC particles were fabricated via selective laser melting(SLM)by employing various laser scan strategies.A detailed relationship between the SLM strategies,defect formation,...Steel matrix composites(SMCs)reinforced with WC particles were fabricated via selective laser melting(SLM)by employing various laser scan strategies.A detailed relationship between the SLM strategies,defect formation,microstructural evolution,and mechanical properties of SMCs was established.The laser scan strategies can be manipulated to deliberately alter the thermal history of SMC during SLM processing.Particularly,the involved thermal cycling,which encompassed multiple layers,strongly affected the processing quality of SMCs.Sshaped scan sequence combined with interlayer offset and orthogonal stagger mode can effectively eliminate the metallurgical defects and retained austenite within the produced SMCs.However,due to large thermal stress,microcracks that were perpendicular to the building direction formed within the SMCs.By employing the checkerboard filling(CBF)hatching mode,the thermal stress arising during SLM can be significantly reduced,thus preventing the evolution of interlayer microcracks.The compressive properties of fabricated SMCs can be tailored at a high compressive strength(~3031.5 MPa)and fracture strain(~24.8%)by adopting the CBF hatching mode combined with the optimized scan sequence and stagger mode.This study demonstrates great feasibility in tuning the mechanical properties of SLM-fabricated SMCs without varying the set energy input,e.g.,laser power and scanning speed.展开更多
This paper employs a velocity plus displacement（V＋D）-based equivalent force control（EFC） method to solve the velocity/displacement difference equation in a real-time substructure test. This method uses type 2 fee...This paper employs a velocity plus displacement（V＋D）-based equivalent force control（EFC） method to solve the velocity/displacement difference equation in a real-time substructure test. This method uses type 2 feedback control loops to replace mathematical iteration to solve the nonlinear dynamic equation. A spectral radius analysis of the amplification matrix shows that the type 2 EFC-explicit, Newmark-β method has beneficial numerical characteristics for this method. Its stability limit of Ω = 2 remains unchanged regardless of the system damping because the velocity is achieved with very high accuracy during simulation. In contrast, the stability limits of the central difference method using direct velocity prediction and the EFC-average acceleration method with linear interpolation are shown to decrease with an increase in system damping. In fact, the EFC-average acceleration method is shown to change from unconditionally stable to conditionally stable. We also show that if an over-damped system with a damping ratio of 1.05 is considered, the stability limit is reduced to Ω =1.45. Finally, the results from an experiment with a single-degree-of-freedom structure installed with a magneto-rheological（MR） damper are presented. The results demonstrate that the proposed method is able to follow both displacement and velocity commands with moderate accuracy, resulting in improved test performance and accuracy for structures that are sensitive to both velocity and displacement inputs. Although the findings of the study are promising, additional test data and several further improvements will be required to draw general conclusions.展开更多
We theoretically analyze the transient properties of a probe field absorption and dispersion in a coupled semiconductor double-quantum-dot nanostructure.We show that in the presence of the Gaussian laser beams,absorpt...We theoretically analyze the transient properties of a probe field absorption and dispersion in a coupled semiconductor double-quantum-dot nanostructure.We show that in the presence of the Gaussian laser beams,absorption and dispersion of the probe field can be dramatically influenced by the relative phase between applied fields and intensity of the Gaussian laser beams.Transient and steady-state behaviors of the probe field absorption and dispersion are discussed to estimate the required switching time.The estimated range is between 5-8 ps for subluminal to superluminal light propagation.展开更多
This paper theoretically investigates the coherent phase control in electron-argon scattering assisted by a bichro- matic laser field. The laser field is composed of a fundamental component and its second harmonic. Th...This paper theoretically investigates the coherent phase control in electron-argon scattering assisted by a bichro- matic laser field. The laser field is composed of a fundamental component and its second harmonic. The incoming and out going states of electron are described by the Volkov wave functions, and the electron-target interaction is treated as a screening potential. Numerical results for differential cross section of multiphoton processes vs the phase difference between the two components of laser field are discussed for several scattering angles and impact energies.展开更多
The polarization of traditional photonic crystal（PC） vertical cavity surface emitting laser（VCSEL） is uncontrollable,resulting in the bit error increasing easily.Elliptical hole photonic crystal can control the tr...The polarization of traditional photonic crystal（PC） vertical cavity surface emitting laser（VCSEL） is uncontrollable,resulting in the bit error increasing easily.Elliptical hole photonic crystal can control the transverse mode and polarization of VCSEL efficiently.We analyze the far field divergence angle,and birefringence of elliptical hole PC VCSEL.When the ratio of minor axis to major axis b/a = 0.7,the PC VCSEL can obtain single mode and polarization.According to the simulation results,we fabricate the device successfully.The output power is 1.7 mW,the far field divergence angle is less than 10°,and the side mode suppression ratio is over 30 dB.The output power in the Y direction is 20 times that in the X direction.展开更多
In continuous wave CO2 laser-TlG hybrid welding process, the laser energy is not fully utilized because of the absorption and defocusing by plasma in the arc space. Therefore, the optimal welding result can only be ac...In continuous wave CO2 laser-TlG hybrid welding process, the laser energy is not fully utilized because of the absorption and defocusing by plasma in the arc space. Therefore, the optimal welding result can only be achieved in a limited energy range. In order to improve the welding performance further, a novel hybrid welding method--pulse CO2 laser-TIG arc hybrid welding by coordinated control is proposed and investigated. The experimental results indicate that, compared with continuous wave CO2 laser-TIG hybrid welding, the absorption and defocusing of laser energy by plasma are decreased further, and at the same time, the availability ratio of laser and arc energy can be increased when a coordinated frequency is controlled. As a result, the weld appearance is also improved as well as the weld depth is deepened. Furthermore, the effect of frequency and phase of pulse laser and TIG arc on the arc images and welding characteristics is also studied. However, the novel hybrid method has great potentials in the application of industrials from views of techniques and economy.展开更多
In order to improve the compatibility of laser-induced breakdown spectroscopy( LIBS) instrument for different types of parts and optimize the analysis and testing processes,a modularized automatic measurement and cont...In order to improve the compatibility of laser-induced breakdown spectroscopy( LIBS) instrument for different types of parts and optimize the analysis and testing processes,a modularized automatic measurement and control system was developed. Based on the characteristics of each LIBS component, the following development steps have been performed:( 1) a summary of characteristic parameters of the component are established;( 2) the integration mechanism of multiple electrical interfaces is designed;( 3) the component control instruction library is developed. The experimental results indicate that the measurement and control system is compatible with most LIBS parts in the market.Spectrometer and laser can be compatible with at least three different types of parts. In addition,a multilayer iterative testing process is designed to improve the efficiency of optimization process of LIBS parameters. The experimental results have shown that the automatic optimization of the delay time compared to the manual testing provides significant gain in testing efficiency. The range of delay time in the experiments is 1. 28 to 10. 28 μs and the step value is 1,0. 5,0. 2 and 0. 1 μs. The gain in testing efficiency has been found to be increased by 73. 76%,75. 93%,78. 81% and 80. 42%,respectively.展开更多
According to the disadvantages of traditional mechanical gyro inertial measurement unit('IMU') for steering system not being available for missile attitude control, a concept based on laser gyro IMU is propose...According to the disadvantages of traditional mechanical gyro inertial measurement unit('IMU') for steering system not being available for missile attitude control, a concept based on laser gyro IMU is proposed to realize navigation & positioning and attitude control. The concept will save three single-axis rate gyros compared with traditional missile attitude control system, and is available both for strapdown and platform inertial navigation systems. Firstly, this article analyzes the selection requirements of sensitive device for missile attitude control system, and then analyzes the feasibility of missile attitude control based on laser gyro theoretically, on this basis, from four aspects of error characteristics, anti-vibration characteristics, temperature characteristics and dynamic characteristics, validate the feasibility of the concept practically. Secondly according to the strict requirements of dynamic characteristics on attitude control system, a special design is made for gyro signal filtering used for attitude control. By changing the traditional high order FIR filter to adaptive filter and low order FIR filter, laser gyro's signal phase delay is reduced. The delay time of theoretical design is 1.5 ms. Lastly, this design is validated through an angle vibration test, and test curve indicates that the dynamic characteristics of laser gyro completely meets the requirements of the attitude control system, and the maximum delay time is 1.6144 ms, which satisfies with the attitude update rate of 2 ms per frame. This concept can simplify the missile guidance system design, at the same time, it does not reduce missile guidance accuracy, and also provides reference for the broadening of the application of laser gyro.展开更多
The software of behaviour-based algorithm~ was parted to several functional modules which represented different behaviours with different priorities. A basic algorithm with S-type arbiter and an improved algorithm wit...The software of behaviour-based algorithm~ was parted to several functional modules which represented different behaviours with different priorities. A basic algorithm with S-type arbiter and an improved algorithm with I-type arbiter were compared. The improved algorithm can reduce judging time and avoid some mistakes of the basic one. In mapping obstacles, the robot adjusted the spread angle according to different distances to obstacles in scaled vector field histogram （SVFH） algorithm, and then the robot turned more sharply in near obstacles than in far obstacles, which made the robot move more safely and smoothly in a cluttered room.展开更多
Influence produced by the heat effect at work of the laser instrument crystal of the semiconductor, the text designs a kind of temperature control system to the crystal of the laser instrument, using the thought and m...Influence produced by the heat effect at work of the laser instrument crystal of the semiconductor, the text designs a kind of temperature control system to the crystal of the laser instrument, using the thought and method of the classical control theory to analyze this temperature control system, and establishes mathematics model. According to mathematics model the text demonstrated the system at S field and time- area, and proposed optimizing basis to the total mark of proportion and differential parameter to con- troller PID, thus proposed a kind of temperature control scheme. And the thermostatically system is simulated by MATLAB.展开更多
An integrated laser diode driver(LDD) driving an edge-emitting laser diode was designed and fabricated by 0.35 μm BiCMOS technology. This paper proposes a scheme which combines the automatic power control loop and te...An integrated laser diode driver(LDD) driving an edge-emitting laser diode was designed and fabricated by 0.35 μm BiCMOS technology. This paper proposes a scheme which combines the automatic power control loop and temperature com-pensation for modulation current in order to maintain constant extinction ratio and average optical power. To implement tem-perature compensation for modulation current,a novel circuit which generates a PTAT current by using the injecting base current of a bipolar transistor in saturation region,and alternates the amplifier feedback loop(closed or not) to control the state of the current path is presented. Simulation results showed that programmed by choice of external resistors,the IC can provide modu-lation current from 5 mA to 85 mA with temperature compensation adjustments and independent bias current from 4 mA to 100 mA. Optical test results showed that clear eye-diagrams can be obtained at 155 Mbps,with the output optical power being nearly constant,and the variation of extinction ratio being lower than 0.7 dB.展开更多
The optimum theory and methods were adopted to design the laser beam riding guidance anti tank missile's control system in the short run. Through building the mathematical model of system, selecting a proper meth...The optimum theory and methods were adopted to design the laser beam riding guidance anti tank missile's control system in the short run. Through building the mathematical model of system, selecting a proper method and taking advantage of computer's high speed calculation and logic traits, an optimal controller was designed. Simulation results showed that the designed control system has fair performance and it satisfies the tactical and technical requirements. The results also demonstrate that by the combination of the optimizing methods and the computer the control system could be designed as soon as possible.展开更多
Films from congo red (CR) alternated with poly(allylamine hydrochloride), PAH, were prepared by layer-by-layer and alternative spray techniques. In order to investigate the change of roughness induced by laser light i...Films from congo red (CR) alternated with poly(allylamine hydrochloride), PAH, were prepared by layer-by-layer and alternative spray techniques. In order to investigate the change of roughness induced by laser light irradiation (532 nm), both kinds of films were characterized by using UV-visible spectroscopy and atomic force microscopy (AFM). At dif- ferent irradiation times, layer-by-layer, LbL, films showed small changes in the roughness and irregular behavior, whereas spray films exhibited higher and a regular decreasing of roughness with increasing irradiation time. The higher roughness of spray films as compared with the LbL ones was attributed to different formation mechanisms of the films. The decreasing of the roughness as a function of the irradiation time (exhibited by the spray films) was associated to surface relaxation due to the interplay between photoisomerization of congo red dye and the heating of the sample during the laser light irradiation. The results suggested that the alternative spray technique is the best choose to control of roughness of the films by using light irradiation.展开更多
Ultrafast laser processing technology has offered a wide range of opportunities in micro/nano fabrication and other fields such as nanotechnology,biotechnology,energy science,and photonics due to its controllable proc...Ultrafast laser processing technology has offered a wide range of opportunities in micro/nano fabrication and other fields such as nanotechnology,biotechnology,energy science,and photonics due to its controllable processing precision,diverse processing capabilities,and broad material adaptability.The processing abilities and applications of the ultrafast laser still need more exploration.In the field of material processing,controlling the atomic scale structure in nanomaterials is challenging.Complex effects exist in ultrafast laser surface/interface processing,making it difficult to modulate the nanostructure and properties of the surface/interface as required.In the ultrafast laser fabrication of micro functional devices,the processing ability needs to be improved.Here,we review the research progress of ultrafast laser micro/nano fabrication in the areas of material processing,surface/interface controlling,and micro functional devices fabrication.Several useful ultrafast laser processing methods and applications in these areas are introduced.With various processing effects and abilities,the ultrafast laser processing technology has demonstrated application values in multiple fields from science to industry.展开更多
This paper presents the principle and mathematic model for the 3D depth map method based on space encoding images performed by modulating scanning structuredlight according to time sequences,and the synchro control ...This paper presents the principle and mathematic model for the 3D depth map method based on space encoding images performed by modulating scanning structuredlight according to time sequences,and the synchro control among the camera,laser diode modulation and scanning polyhedron.展开更多
基金Project supported by the National Natural Science Foundation of China(Grant No.62275272)the Training Program for Excellent Young Innovators of Changsha(Grant No.KQ2305025)。
文摘Coherent beam combining(CBC) of fiber laser array is a promising technique to realize high output power while maintaining near diffraction-limited beam quality. To implement CBC, an appropriate phase control feedback structure should be established to realize phase-locking. In this paper, an innovative internal active phase control CBC fiber laser array based on photodetector array is proposed. The dynamic phase noises of the laser amplifiers are compensated before being emitted into free space. And the static phase difference compensation of emitting laser array is realized by interference measurement based on photodetector array. The principle of the technique is illustrated and corresponding simulations are carried out, and a CBC system with four laser channels is built to verify the technique. When the phase controllers are turned on, the phase deviation of the laser array is less than λ/20, and ~ 95% fringe contrast of the irradiation distribution is obtained. The technique proposed in this paper could provide a reference for the system design of a massive high-power CBC system.
基金Project supported by the National Natural Science Foundation of China (Grant Nos.12104285,12074240,12204135,12374260,12264013,12204136,92250303,and 12074418)the Guangdong Basicand Applied Basic Research Foundation (Grant No.2022A1515011742)+5 种基金the Special Scientific Research Program supported by the Shaanxi Education Department (Grant No.22JK0423)the Natural Science Basic Research Program of Shaanxi Province of China (Grant Nos.2023-JC-QN-0085 and 2023-JC-QN-0267)the Hainan Provincial Natural Science Foundation of China (Grant Nos.122CXTD504,123MS002,123QN179,123QN180,and 122QN217)the Sino-German Mobility Programme (Grant No.M-0031)the Xi’an Aeronautical Institute 2023 Innovation and Entrepreneurship Training Program for college students (Grant No.S202311736036)the Course Ideological and Political Education Program (Grant No.23ZLGC5030)。
文摘We study the above-threshold ionization(ATI)process of atoms exposed to fundamental and high-frequency lasers with arbitrary ellipticity by applying the frequency-domain theory.It is found that the angular-resolved ATI spectrum is sensitive to ellipticities of two lasers and emitted angles of the photoelectron.Particularly for the photon energy of the highfrequency laser more than atomic ionization potential,the width of plateau tends to a constant with increasing ellipticity of fundamental field,the dip structure disappears with increasing ellipticity of the high-frequency field.With the help of the quantum channel analysis,it is shown that the angular distribution depends mainly on the ellipticity of high-frequency field in the case that its frequency is high.Moreover,one can see that the maximal and minimal energies in quantum numerical results are in good agreement with the classical prediction.Our investigation may provide theoretical support for experimental research on polarization control of ionization in elliptically polarized two-color laser fields.
基金supported by the Open Fund of State Key Laboratory of High speed Railway Track Technology(2022YJ127-1)National Natural Science Foundation of China(52104125,41941018)+1 种基金the Natural Science Basic Research Plan in Shaanxi Province of China(2022JQ-304)the Young Elite Scientists Sponsorship Program by CAST(No.2021QNRC001)。
文摘In the construction of a soft rock tunnel,it is critical to accurately estimate the pre-stressed anchor support parameters for surrounding rock reinforcement;otherwise,engineering disasters may occur.This paper presents a support parameter selection method that aims to allow deformation as a control objective,which was applied to the tunnel located in Muzailing Highway,Min County,Dingxi City,Gansu Province,China.Through theoretical analysis,we have identified five factors that influence pre-stressing anchorages.The selection of mechanical parameters for the rock mass was carried out using an inverse analysis method.Compared with the measured data,the maximum displacement error of the numerical simulation results was only 0.07 m.The length of anchor cable,circumferential spacing of anchor cable,longitudinal spacing,and pre-stress index are adopted as the input parameters for the support vector machine neural network model based on particle swarm optimization(PSO-LSSVM).Besides,the vault subsidence and the maximum deformation of surrounding rock are considered as output values(performance indices).The goodness of fit between the predicted values and the simulated values exceeds 0.9.Finally,all support parameters within the acceptable deformation range are calculated.The optimal support variables are derived by considering the construction cost and duration.The field application results show that it is feasible to construct the sample database utilizing the numerical simulation approach by taking the displacement as the control target and using the neural network to specify the appropriate support parameters.
文摘A novel variable displacement compressor (VDC) for automotive air conditioner (AAC) is introduced, which inherits the advantages of common wobble plate type VDC. It has fewer parts and makes less noise, and instead of pneumatic valve the displacement is controlled by electronic control valve. In order to know the control mechanism well and get a good control effect, a mathematical model for the variable displacement mechanism is developed according to the geometrical and kinematical information of the compressor. Using the model, the effect of relevant parameters on variable displace control is estimated. It is helpful to make the optimum decision in the flow control of AAC. As the novel displacement control device, the structure and control rule of electronic control valve is introduced. It can get better effect than the conventional pneumatic valves. And by using this new electronic control device, the optimum systemic control of AAC is available.
基金Project supported by the Natural Science Foundation of Henan province, China （Grant No 0411011900）.
文摘In this paper, the dynamics of coherent laser control of potassium atoms is studied by using the time-dependent multilevel approach （TDMA）. The calculation results of population transfer are presented with different laser fields. The results show that the population can be transferred to target state completely by a specially designed laser field.
基金the National Key Research and Development Program“Additive Manufacturing and Laser Manufacturing”(No.2016YFB1100101)the National Natural Science Foundation of China(No.51735005)+3 种基金the Basic Strengthening Program of Science and Technology(No.2019-JCJQ-JJ-331)the 5th Jiangsu Province 333 High Level Talents Training Project,China(No.BRA2019048)the 15th Batch of“Six Talents Peaks”Innovative Talents Team Program“Laser Precise Additive Manufacturing of Structure-Performance Integrated Lightweight Alloy Components”(No.TD-GDZB-001)and the 2017 Excellent Scientific and Technological Innovation Teams of Universities in Jiangsu“Laser Additive Manufacturing Technologies for Metallic Components”funded by Jiangsu Provincial Department of Education of China(No.51921003).Konrad Kosiba acknowledges the support from DFG under Grant No.KO 5771/1-1.
文摘Steel matrix composites(SMCs)reinforced with WC particles were fabricated via selective laser melting(SLM)by employing various laser scan strategies.A detailed relationship between the SLM strategies,defect formation,microstructural evolution,and mechanical properties of SMCs was established.The laser scan strategies can be manipulated to deliberately alter the thermal history of SMC during SLM processing.Particularly,the involved thermal cycling,which encompassed multiple layers,strongly affected the processing quality of SMCs.Sshaped scan sequence combined with interlayer offset and orthogonal stagger mode can effectively eliminate the metallurgical defects and retained austenite within the produced SMCs.However,due to large thermal stress,microcracks that were perpendicular to the building direction formed within the SMCs.By employing the checkerboard filling(CBF)hatching mode,the thermal stress arising during SLM can be significantly reduced,thus preventing the evolution of interlayer microcracks.The compressive properties of fabricated SMCs can be tailored at a high compressive strength(~3031.5 MPa)and fracture strain(~24.8%)by adopting the CBF hatching mode combined with the optimized scan sequence and stagger mode.This study demonstrates great feasibility in tuning the mechanical properties of SLM-fabricated SMCs without varying the set energy input,e.g.,laser power and scanning speed.
基金Scientific Research Fund of the Institute of Engineering Mechanics,CEA under Grant No.2016B09,2017A02 and 2016A06the National Natural Science Foundation of China under Grant No,51378478,51408565,51678538 and 51161120360the National ScienceTechnology Support Plan Projects(2016YFC0701106)
文摘This paper employs a velocity plus displacement（V＋D）-based equivalent force control（EFC） method to solve the velocity/displacement difference equation in a real-time substructure test. This method uses type 2 feedback control loops to replace mathematical iteration to solve the nonlinear dynamic equation. A spectral radius analysis of the amplification matrix shows that the type 2 EFC-explicit, Newmark-β method has beneficial numerical characteristics for this method. Its stability limit of Ω = 2 remains unchanged regardless of the system damping because the velocity is achieved with very high accuracy during simulation. In contrast, the stability limits of the central difference method using direct velocity prediction and the EFC-average acceleration method with linear interpolation are shown to decrease with an increase in system damping. In fact, the EFC-average acceleration method is shown to change from unconditionally stable to conditionally stable. We also show that if an over-damped system with a damping ratio of 1.05 is considered, the stability limit is reduced to Ω =1.45. Finally, the results from an experiment with a single-degree-of-freedom structure installed with a magneto-rheological（MR） damper are presented. The results demonstrate that the proposed method is able to follow both displacement and velocity commands with moderate accuracy, resulting in improved test performance and accuracy for structures that are sensitive to both velocity and displacement inputs. Although the findings of the study are promising, additional test data and several further improvements will be required to draw general conclusions.
文摘We theoretically analyze the transient properties of a probe field absorption and dispersion in a coupled semiconductor double-quantum-dot nanostructure.We show that in the presence of the Gaussian laser beams,absorption and dispersion of the probe field can be dramatically influenced by the relative phase between applied fields and intensity of the Gaussian laser beams.Transient and steady-state behaviors of the probe field absorption and dispersion are discussed to estimate the required switching time.The estimated range is between 5-8 ps for subluminal to superluminal light propagation.
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 10874169 and 10674125)the National Basic Research Program of China (Grant No. 2007CB925200)S.-M. Li is grateful to Deutscher Akademischer Austauschdienst and Deutsche Forschungsgemeinschaft for financial support during his stay in Germany
文摘This paper theoretically investigates the coherent phase control in electron-argon scattering assisted by a bichro- matic laser field. The laser field is composed of a fundamental component and its second harmonic. The incoming and out going states of electron are described by the Volkov wave functions, and the electron-target interaction is treated as a screening potential. Numerical results for differential cross section of multiphoton processes vs the phase difference between the two components of laser field are discussed for several scattering angles and impact energies.
基金Project supported by the National High Technology Research and Development Program of China (Grant No. 2008AA03Z402)the Beijing Municipal Natural Science Foundation,China (Grant Nos. 4092007,4112006,4102003,and 4132006)+1 种基金the National Natural Science Foundation of China (Grant Nos. 61076044,61036002,61036009,and 60978067)the Doctoral Fund of the Ministry of Education of China (Grant No. 20121103110018)
文摘The polarization of traditional photonic crystal（PC） vertical cavity surface emitting laser（VCSEL） is uncontrollable,resulting in the bit error increasing easily.Elliptical hole photonic crystal can control the transverse mode and polarization of VCSEL efficiently.We analyze the far field divergence angle,and birefringence of elliptical hole PC VCSEL.When the ratio of minor axis to major axis b/a = 0.7,the PC VCSEL can obtain single mode and polarization.According to the simulation results,we fabricate the device successfully.The output power is 1.7 mW,the far field divergence angle is less than 10°,and the side mode suppression ratio is over 30 dB.The output power in the Y direction is 20 times that in the X direction.
文摘In continuous wave CO2 laser-TlG hybrid welding process, the laser energy is not fully utilized because of the absorption and defocusing by plasma in the arc space. Therefore, the optimal welding result can only be achieved in a limited energy range. In order to improve the welding performance further, a novel hybrid welding method--pulse CO2 laser-TIG arc hybrid welding by coordinated control is proposed and investigated. The experimental results indicate that, compared with continuous wave CO2 laser-TIG hybrid welding, the absorption and defocusing of laser energy by plasma are decreased further, and at the same time, the availability ratio of laser and arc energy can be increased when a coordinated frequency is controlled. As a result, the weld appearance is also improved as well as the weld depth is deepened. Furthermore, the effect of frequency and phase of pulse laser and TIG arc on the arc images and welding characteristics is also studied. However, the novel hybrid method has great potentials in the application of industrials from views of techniques and economy.
基金National M ajor Scientific Instruments and Equipment Development Special Funds,China(No.2011YQ030113)
文摘In order to improve the compatibility of laser-induced breakdown spectroscopy( LIBS) instrument for different types of parts and optimize the analysis and testing processes,a modularized automatic measurement and control system was developed. Based on the characteristics of each LIBS component, the following development steps have been performed:( 1) a summary of characteristic parameters of the component are established;( 2) the integration mechanism of multiple electrical interfaces is designed;( 3) the component control instruction library is developed. The experimental results indicate that the measurement and control system is compatible with most LIBS parts in the market.Spectrometer and laser can be compatible with at least three different types of parts. In addition,a multilayer iterative testing process is designed to improve the efficiency of optimization process of LIBS parameters. The experimental results have shown that the automatic optimization of the delay time compared to the manual testing provides significant gain in testing efficiency. The range of delay time in the experiments is 1. 28 to 10. 28 μs and the step value is 1,0. 5,0. 2 and 0. 1 μs. The gain in testing efficiency has been found to be increased by 73. 76%,75. 93%,78. 81% and 80. 42%,respectively.
基金Sponsored by the National Natural Science Foundation of China(Grant No.50979093)
文摘According to the disadvantages of traditional mechanical gyro inertial measurement unit('IMU') for steering system not being available for missile attitude control, a concept based on laser gyro IMU is proposed to realize navigation & positioning and attitude control. The concept will save three single-axis rate gyros compared with traditional missile attitude control system, and is available both for strapdown and platform inertial navigation systems. Firstly, this article analyzes the selection requirements of sensitive device for missile attitude control system, and then analyzes the feasibility of missile attitude control based on laser gyro theoretically, on this basis, from four aspects of error characteristics, anti-vibration characteristics, temperature characteristics and dynamic characteristics, validate the feasibility of the concept practically. Secondly according to the strict requirements of dynamic characteristics on attitude control system, a special design is made for gyro signal filtering used for attitude control. By changing the traditional high order FIR filter to adaptive filter and low order FIR filter, laser gyro's signal phase delay is reduced. The delay time of theoretical design is 1.5 ms. Lastly, this design is validated through an angle vibration test, and test curve indicates that the dynamic characteristics of laser gyro completely meets the requirements of the attitude control system, and the maximum delay time is 1.6144 ms, which satisfies with the attitude update rate of 2 ms per frame. This concept can simplify the missile guidance system design, at the same time, it does not reduce missile guidance accuracy, and also provides reference for the broadening of the application of laser gyro.
基金National Natural Science Foundation of China(No.60975059)Leading Academic Discipline Project of Shanghai Municipal Education Commission,China(No.J513032)Innovation Program of Shanghai Municipal Education Commission,China(No.09YZ343)
文摘The software of behaviour-based algorithm~ was parted to several functional modules which represented different behaviours with different priorities. A basic algorithm with S-type arbiter and an improved algorithm with I-type arbiter were compared. The improved algorithm can reduce judging time and avoid some mistakes of the basic one. In mapping obstacles, the robot adjusted the spread angle according to different distances to obstacles in scaled vector field histogram （SVFH） algorithm, and then the robot turned more sharply in near obstacles than in far obstacles, which made the robot move more safely and smoothly in a cluttered room.
文摘Influence produced by the heat effect at work of the laser instrument crystal of the semiconductor, the text designs a kind of temperature control system to the crystal of the laser instrument, using the thought and method of the classical control theory to analyze this temperature control system, and establishes mathematics model. According to mathematics model the text demonstrated the system at S field and time- area, and proposed optimizing basis to the total mark of proportion and differential parameter to con- troller PID, thus proposed a kind of temperature control scheme. And the thermostatically system is simulated by MATLAB.
基金Project (No. 2006AA01Z226) supported by the Hi-Tech Researchand Development Program (863) of China
文摘An integrated laser diode driver(LDD) driving an edge-emitting laser diode was designed and fabricated by 0.35 μm BiCMOS technology. This paper proposes a scheme which combines the automatic power control loop and temperature com-pensation for modulation current in order to maintain constant extinction ratio and average optical power. To implement tem-perature compensation for modulation current,a novel circuit which generates a PTAT current by using the injecting base current of a bipolar transistor in saturation region,and alternates the amplifier feedback loop(closed or not) to control the state of the current path is presented. Simulation results showed that programmed by choice of external resistors,the IC can provide modu-lation current from 5 mA to 85 mA with temperature compensation adjustments and independent bias current from 4 mA to 100 mA. Optical test results showed that clear eye-diagrams can be obtained at 155 Mbps,with the output optical power being nearly constant,and the variation of extinction ratio being lower than 0.7 dB.
文摘The optimum theory and methods were adopted to design the laser beam riding guidance anti tank missile's control system in the short run. Through building the mathematical model of system, selecting a proper method and taking advantage of computer's high speed calculation and logic traits, an optimal controller was designed. Simulation results showed that the designed control system has fair performance and it satisfies the tactical and technical requirements. The results also demonstrate that by the combination of the optimizing methods and the computer the control system could be designed as soon as possible.
基金This work was supported by CNPq and CAPES(Brazil).R.J.da Silva and R.R.G.Maciel thank Capes(nbioNet)and CNPq for the scholarship.
文摘Films from congo red (CR) alternated with poly(allylamine hydrochloride), PAH, were prepared by layer-by-layer and alternative spray techniques. In order to investigate the change of roughness induced by laser light irradiation (532 nm), both kinds of films were characterized by using UV-visible spectroscopy and atomic force microscopy (AFM). At dif- ferent irradiation times, layer-by-layer, LbL, films showed small changes in the roughness and irregular behavior, whereas spray films exhibited higher and a regular decreasing of roughness with increasing irradiation time. The higher roughness of spray films as compared with the LbL ones was attributed to different formation mechanisms of the films. The decreasing of the roughness as a function of the irradiation time (exhibited by the spray films) was associated to surface relaxation due to the interplay between photoisomerization of congo red dye and the heating of the sample during the laser light irradiation. The results suggested that the alternative spray technique is the best choose to control of roughness of the films by using light irradiation.
基金supported by the National Natural Science Foundation of China(No.52075289)the Tsinghua-Jiangyin Innovation Special Fund(TJISF,No.2023JYTH0104).
文摘Ultrafast laser processing technology has offered a wide range of opportunities in micro/nano fabrication and other fields such as nanotechnology,biotechnology,energy science,and photonics due to its controllable processing precision,diverse processing capabilities,and broad material adaptability.The processing abilities and applications of the ultrafast laser still need more exploration.In the field of material processing,controlling the atomic scale structure in nanomaterials is challenging.Complex effects exist in ultrafast laser surface/interface processing,making it difficult to modulate the nanostructure and properties of the surface/interface as required.In the ultrafast laser fabrication of micro functional devices,the processing ability needs to be improved.Here,we review the research progress of ultrafast laser micro/nano fabrication in the areas of material processing,surface/interface controlling,and micro functional devices fabrication.Several useful ultrafast laser processing methods and applications in these areas are introduced.With various processing effects and abilities,the ultrafast laser processing technology has demonstrated application values in multiple fields from science to industry.
文摘This paper presents the principle and mathematic model for the 3D depth map method based on space encoding images performed by modulating scanning structuredlight according to time sequences,and the synchro control among the camera,laser diode modulation and scanning polyhedron.
