The dissolution of alumina-based refractory ceramics in CaO-Al2O3-SiO_(2)slag melts was performed based on the in-situ observation system of an ultra-high-temperature laser confocal microscope,and the effect of the Ca...The dissolution of alumina-based refractory ceramics in CaO-Al2O3-SiO_(2)slag melts was performed based on the in-situ observation system of an ultra-high-temperature laser confocal microscope,and the effect of the CaO/SiO_(2)slag mass ratio(C/S ratio)on the dissolution rate of alumina-based refractory ceramics was investigated.The results indicate that the dissolution rate increases with an increase of the C/S ratio and is mainly controlled by diffusion.During the early stage of dissolution,for all C/S ratios,the dissolution process conforms to the classical invariant interface approximation model.During the later stage of dissolution,when the C/S ratio is≥6,the dissolution process is significantly different from the model above because of the formation of a thick interfacial layer,which can be explained by dissolution kinetics.展开更多
The aim of this work was to develop, optimize and characterize a silymarin-laden polyvinylpyrrolidone(PVP)-polyethylene glycol(PEG) polymeric composite to resolve low aqueous solubility and dissolution rate problem of...The aim of this work was to develop, optimize and characterize a silymarin-laden polyvinylpyrrolidone(PVP)-polyethylene glycol(PEG) polymeric composite to resolve low aqueous solubility and dissolution rate problem of the drug. A number of silymarin-laden polymeric formulations were fabricated with different quantities of PVP K-30 and PEG 6000 by the solvent-evaporation method. The effect of PVP K-30 and PEG 6000 on the aqueous solubility and dissolution rate was investigated. The optimized formulation and its constituents were characterized using powder X-ray diffraction(PXRD), differential scanning calorimetry(DSC), scanning electron microscopy(SEM) and Fourier transform infrared spectroscopy(FTIR) techniques. Both the PEG 6000 and PVP K-30 positively affected the aqueous solubility and dissolution rate of the drug. In particular, a formulation consisting of silymarin, PVP K-30 and PEG 6000(0.25/1.5/1.5, w/w/w) furnished the highest solubility(24.3972.95 mg/mL) and an excellent dissolution profile( $100% in 40 min). The solubility enhancement with this formulation was $ 1150-fold as compared to plain silymarin powder. Moreover, all the constituents existed in the amorphous state in this silymarin-laden PVP-PEG polymeric composite. Accordingly, this formulation might be a promising tool to administer silymarin with an enhanced effect via the oral route.展开更多
The main objective of this research is to conduct a comprehensive study for enhancing the aqueous solubility of poorly water soluble gliclazide using hydrophilic fumed silica particles (Aerosil®380) and evalu...The main objective of this research is to conduct a comprehensive study for enhancing the aqueous solubility of poorly water soluble gliclazide using hydrophilic fumed silica particles (Aerosil®380) and evaluating the influence of silica on drug release profile and pharmacological activity on alloxan induced diabetic rats. Solid dispersions (SD’s) of gliclazide were prepared using solvent evaporation method. The dissolution profiles and solid state characterization of the SD’s prepared were all evaluated. The dissolution rate of gliclazide in the SD’s with fumed silica (weight ratio, 1:1) was approximately 38%, which is about 10 fold higher than that of the pure drug after 30 min. After forming the SD’s, gliclazide changed into an amorphous state, which can infer from differential scanning calorimetry (DSC) and powder X-ray diffraction (PXRD). Fourier transform infrared spectroscopy (FTIR) also revealed the formation of weak hydrogen bonding through the interactions between the secondary amine groups of gliclazide and silanol groups of silica particles in the SD’s. The rapid dissolution rate from the SD’s might be attributed to the amorphization of drug, improved specific surface area and wettability than the original drug crystals. Further, we investigated the antidiabetic effects of SD’s of gliclazide in alloxan induced diabetic rats. The SD’s of gliclazide decrease the blood glucose level 64% whereas the conventional gliclazide decreases only 37% in diabetic rats. Lipid profiles, kidney and liver functions are remarkably improved in diabetic rat treated with SD’s of gliclazide than that of conventional gliclazide. These results suggest that SD’s of gliclazide have much more bioavailability and hence are more pharmacologically active than that of conventional gliclazide form.展开更多
Kyanite is an important and slow-dissolving mineral. Earlier work has measured its dissolution rate at high temperature and acidic pH, but experimental measurements at low temperature and near neutral p H were lacking...Kyanite is an important and slow-dissolving mineral. Earlier work has measured its dissolution rate at high temperature and acidic pH, but experimental measurements at low temperature and near neutral p H were lacking. The rate equation by Palandri and Kharaka(A compilation of rate parameters of water–mineral interaction kinetics for application to geochemical modeling. US Geological Survey, Open File Report 2004-1068, 2004) indicates that the rate of kyanite dissolution at room temperature and near neutral pH is on the order of 10^-17 mol m^-2 s^-1, orders of magnitudes slower than most common silicate minerals such as albite and quartz. This study used an externallystirred mixed-flow reactor, which allows high solid:solution ratios, to measure the dissolution rate of kyanite at 0–22 ℃ and pH of 3.5–7.5. The measured dissolution rate of kyanite is 4.6–7.6 9 10-13 mol m^-2 s^-1 at 22℃, and the apparent activation energy is 73.5 kJ mol^-1. This dissolution rate is close to the rate of quartz dissolution and four orders of magnitude faster than the prediction by rate equation of Palandri and Kharaka(2004).Based on our new experimental data, we recommend the following rate equation for modeling the dissolution of kyanite at ambient temperatures.r=ke(-Ea)/R(1/T-1/(298.15))where k = 5.08 9 10-13 mol m^-2 s^-1, and Ea= 73.5 kJ mol^-1. Review of literature data(Carroll in The dissolution behavior of corundum, kaolinite, and andalusite: a surface complex reaction model for the dissolution of aluminosilicate minerals in diagenetic and weathering environs. Dissertation, Northwestern University, 1989) led to a recommended rate equation for andalusite as for T = 25℃ and pH = 2–10:r=k1aH+^n1+k2+k3aH^+^n3where k1= 4.04 9 10^-10 mol m^-2 s^-1, k2= 7.95×10^-10 mol m^-2 s^-1, k3= 1.01×10^-17 mol m^-2 s^-1, n1= 1.2 and n3=-0.6.展开更多
Determination of dissolution rate of alumina is one of the classical problems in aluminum electrolysis.A novel method which can measure the dissolution rate of alumina was presented.Effect of factors on dissolution ra...Determination of dissolution rate of alumina is one of the classical problems in aluminum electrolysis.A novel method which can measure the dissolution rate of alumina was presented.Effect of factors on dissolution rate of alumina was studied intuitively and roundly using transparent quartz electrobath and image analysis techniques.Images about dissolution process of alumina were taken at an interval of fixed time from transparent quartz electrobath of double rooms.Gabor wavelet transforms were used for extracting and describing the texture features of each image.After subsampling several times,the dissolution rate of alumina was computed using these texture features in local neighborhood of samples.Regression equation of the dissolution rate of alumina was obtained using these dissolution rates.Experiments show that the regression equation of the dissolution rate of alumina is y=-0.000 5x3+0.024 0x2-0.287 3x+ 1.276 7 for Na3AlF6-AlF3-Al2O3-CaF2-LiF-MgF2 system at 920 °C.展开更多
Aim To study the effect of complexation with hydroxylpmpyl-β-cycledextrin (HP-β-CD) on the solubility, dissolution rate and chemical stability of pmstaglandin E1 (PGE1), thereby providing a basis for preparing a sta...Aim To study the effect of complexation with hydroxylpmpyl-β-cycledextrin (HP-β-CD) on the solubility, dissolution rate and chemical stability of pmstaglandin E1 (PGE1), thereby providing a basis for preparing a stable solid or aqueous preparation of PGF1 formulated with HP-β-CD. Methods The effect of HP-β-CD on the solubility of PGF1 was studied by phase solubility method. The formation of inclusion complexes of PGE1 with HP-β-CD in the aqueous solution was confirmed by UV spectra, circular dichroism spectroscopy, and that in the solid state by IR spectra and X-ray diffractometry. An solid inclusion complex of PGF1 with HP-β-CD was prepared by lyophilization. The dissolution rate and stability of the inclusion complex were determined and compared with those of PGE1 alone. Meanwhile, the stability of PGF1 aqueous solutions in the presence of HP-β-CD was studied under different pH conditions. Results The solubility of PGF1 increased linearly with increasing HP-β-CD concentration in various pH buffered solutions, showing typical AL-type phase solubility diagrams. The stability and dissolution rate of the solid inclusion complex of PGE1 were significantly increased, compared with those of pure PGE1 . The stability of PGEI in HP-β-CD solutions was also obviously improved under acidic and basic conditions, but the stabilizing effect was absent under neutral conditions. Conclulsions The solubility, dissolution rate and chemical stability of PGE1 are markedly improved by complexation with HP-β-CD. It is quite possible to prepare a stable PGE1 inclusion complex-containing solid dosage forms, but almost impossible to obtain a stable aqueous preparation of PGE1 formulated with HP-β-CD.展开更多
The objective of this study was to understand the impact of active pharmaceutical ingredients(API) particle size on a re-developed generic product of glipizide and to improve its formulation so that it exhibits bioequ...The objective of this study was to understand the impact of active pharmaceutical ingredients(API) particle size on a re-developed generic product of glipizide and to improve its formulation so that it exhibits bioequivalent to that of the reference listed drug(RLD). Two commercial batches of APIs(API-1 and API-2) with the same polymorphism and one batch of home-made APIs(API-3) with super-small particle size were used in the present study.The in vitro dissolution profiles of the tested formulations were compared with the RLD in a series of dissolution media. Then, the impact of particle size on in vivo absorption was evaluated in Beagle dogs. Compared with the RLD, formulation A with larger API size showed slower dissolution in p H 6.0 and 7.4 medium, resulting bioinequivalent with the RLD. Conversely, formulation B with smaller API size demonstrated similar in vitro dissolution profiles with the RLD and thus exhibited bioequivalent in the present study. Furthermore, formulation C with super small particle size still exhibited identical oral absorption although rapid dissolution was observed in the tested condition. Herein, it indicated that 2–5 μm might be defined as the "inert size range" of glipizide for ensuring the bioequivalence with the RLD. The results in the present study might help to obtain a better understanding of the variability in raw materials for oral absorption, develop a bioequivalent product and thus post-market quality control.展开更多
Manganese is ubiquitous in terrestrial environments and most studies have focused on dissolution of Mn oxides,but aluminosilicates also release Mn.Here,we evaluated oxic Mn dissolution from six rocks and minerals(amph...Manganese is ubiquitous in terrestrial environments and most studies have focused on dissolution of Mn oxides,but aluminosilicates also release Mn.Here,we evaluated oxic Mn dissolution from six rocks and minerals(amphibolite,anorthosite,kaolinite,kyanite,muscovite,orthoclase feldspar) and soils from four Critical Zone Observatories(CZOs) under four LMWOLs treatments(catechol,citric acid,oxalic acid,control).Overall rock and mineral Mn mass-normalized release was 1.4 ± 0.5 nM μM^(-1) 14 d^(-1) and dissolution rate was 2403 ± 935 nM m^(-2) d^(-1) x 10^(3).Overall CZO soil Mn release was 16.7±5.1 nM μM^(-1) 14 d^(-1) and dissolution rate was 7010 ± 2570 nM m^(-2) d^(-1) × 10^(3).Anorthosite and kyanite had the highest Mn dissolution rates but kaolinite and kyanite had the highest Mn mass-normalized release rates.We hypothesize the structural location of Mn,surface area,and potential inclusions of highly-weatherable-phases control Mn dissolution for rocks and minerals.CZO soils with the highest solid phase Mn had the highest Mn release and dissolution rates.Citric acid and catechol had higher Mn release and dissolution rates than the control while oxalic acid did not.For rocks and minerals,we found pH 4 had higher Mn release and dissolution rates than pH6,but not for control treatments without LMWOL.Our study highlights that the abundance of Mn drove Mn release in soils but not rocks and minerals.Moreover,LMWOLs are important for Mn dissolution,even under acidic pH conditions.展开更多
In recirculating aquaculture systems(RASs),the effective treatment of aquaculture tailwater is essential to maintain the health of the RAS.This study investigated the optimal time and method for tailwater treatment du...In recirculating aquaculture systems(RASs),the effective treatment of aquaculture tailwater is essential to maintain the health of the RAS.This study investigated the optimal time and method for tailwater treatment during three periods of the aquaculture of the Litopenaeus vannamei:nursery(0–26 d),middle(27–57 d),and later(57–104 d).The variation of several water parameters during the dissolution of total suspended solid(TSS)in tailwater,applied with the effects of ozone on the microorganism and water quality parameters were investigated.Results showed that the TSS concentrations in tailwater decreased with time,although not significantly(P>0.05),whereas total ammonia nitrogen(TAN),nitrite(NO-2-N),and nitrate(NO_(3)^(-)-N)increased significantly(P<0.05).Therefore,TSS should be removed from the tailwater as early as possible,being most optimal within 4 h.Ozone removed 38.24%–48.95%of TSS,17.78%–90.14%of TAN,and 87.50%–98.90%of NO-2-N after 4 h of treatment.However,it resulted in the significant accumulation of NO_(3)^(-)-N.Moreover,the total number of Vibrio and bacterial counts in aquaculture tailwater was reduced completely by ozone within 4 h.Thus,these results provided technical details and data support for the effective treatment of tailwater from shrimp RAS.展开更多
To clarify the formation and distribution of feldspar dissolution pores and predict the distribution of high-quality reservoir in gravity flow sandstone of the 7^(th) member of Triassic Yanchang Formation(Chang 7 Memb...To clarify the formation and distribution of feldspar dissolution pores and predict the distribution of high-quality reservoir in gravity flow sandstone of the 7^(th) member of Triassic Yanchang Formation(Chang 7 Member)in the Ordos Basin,thin sections,scanning electron microscopy,energy spectrum analysis,X-ray diffraction whole rock analysis,and dissolution experiments are employed in this study to investigate the characteristics and control factors of feldspar dissolution pores.The results show that:(1)Three types of diagenetic processes are observed in the feldspar of Chang 7 sandstone in the study area:secondary overgrowth of feldspar,replacement by clay and calcite,and dissolution of detrital feldspar.(2)The feldspar dissolution of Chang 7 tight sandstone is caused by organic acid,and is further affected by the type of feldspar,the degree of early feldspar alteration,and the buffering effect of mica debris on organic acid.(3)Feldspars have varying degrees of dissolution.Potassium feldspar is more susceptible to dissolution than plagioclase.Among potassium feldspar,orthoclase is more soluble than microcline,and unaltered feldspar is more soluble than early kaolinized or sericitized feldspar.(4)The dissolution experiment demonstrated that the presence of mica can hinder the dissolution of feldspar.Mica of the same mass has a significantly stronger capacity to consume organic acids than feldspar.(5)Dissolution pores in feldspar of Chang 7 Member are more abundant in areas with low mica content,and they improve the reservoir physical properties,while in areas with high mica content,the number of feldspar dissolution pores decreases significantly.展开更多
Pulse rate is one of the important characteristics of traditional Chinese medicine pulse diagnosis,and it is of great significance for determining the nature of cold and heat in diseases.The prediction of pulse rate b...Pulse rate is one of the important characteristics of traditional Chinese medicine pulse diagnosis,and it is of great significance for determining the nature of cold and heat in diseases.The prediction of pulse rate based on facial video is an exciting research field for getting palpation information by observation diagnosis.However,most studies focus on optimizing the algorithm based on a small sample of participants without systematically investigating multiple influencing factors.A total of 209 participants and 2,435 facial videos,based on our self-constructed Multi-Scene Sign Dataset and the public datasets,were used to perform a multi-level and multi-factor comprehensive comparison.The effects of different datasets,blood volume pulse signal extraction algorithms,region of interests,time windows,color spaces,pulse rate calculation methods,and video recording scenes were analyzed.Furthermore,we proposed a blood volume pulse signal quality optimization strategy based on the inverse Fourier transform and an improvement strategy for pulse rate estimation based on signal-to-noise ratio threshold sliding.We found that the effects of video estimation of pulse rate in the Multi-Scene Sign Dataset and Pulse Rate Detection Dataset were better than in other datasets.Compared with Fast independent component analysis and Single Channel algorithms,chrominance-based method and plane-orthogonal-to-skin algorithms have a more vital anti-interference ability and higher robustness.The performances of the five-organs fusion area and the full-face area were better than that of single sub-regions,and the fewer motion artifacts and better lighting can improve the precision of pulse rate estimation.展开更多
In this paper,we study the one-dimensional motion of viscous gas near a vacuum,with the gas connecting to a vacuum state with a jump in density.The interface behavior,the pointwise decay rates of the density function ...In this paper,we study the one-dimensional motion of viscous gas near a vacuum,with the gas connecting to a vacuum state with a jump in density.The interface behavior,the pointwise decay rates of the density function and the expanding rates of the interface are obtained with the viscosity coefficientμ(ρ)=ρ^(α)for any 0<α<1;this includes the timeweighted boundedness from below and above.The smoothness of the solution is discussed.Moreover,we construct a class of self-similar classical solutions which exhibit some interesting properties,such as optimal estimates.The present paper extends the results in[Luo T,Xin Z P,Yang T.SIAM J Math Anal,2000,31(6):1175-1191]to the jump boundary conditions case with density-dependent viscosity.展开更多
The Earth’s surface kinematics and deformation are fundamental to understanding crustal evolution.An effective research approach is to estimate regional motion field and deformation fields based on modern geodetic ne...The Earth’s surface kinematics and deformation are fundamental to understanding crustal evolution.An effective research approach is to estimate regional motion field and deformation fields based on modern geodetic networks.If the discrete observed velocity field is obtained,the velocity related fields,such as dilatation rate and maximum shear strain rate,can be estimated by applying varied mathematical approaches.This study applied Akaike's Bayesian Information Criterion(ABIC)method to calculate strain rate fields constrained by GPS observations in the southeast Tibetan Plateau.Comparison with results derived from other three methods revealed that our ABIC-derived strain rate fields were more precise.The maximum shear strain rate highlighted the Xianshuihe–Xiaojiang fault system as the main boundary for the outward migration of material in southeastern Tibet,indicating rotation of eastern Tibet material around the eastern Himalaya rather than whole extrusion along a fixed channel.Additionally,distinct dilatation rate patterns in the northeast and southwest regions of the fault system were observed.The northeast region,represented by the Longmenshan area,exhibited negative dilatational anomalies;while the southwest region,represented by the Jinsha River area north of 29°N,displayed positive dilatational anomalies.This indicates compression in the former and extension in the latter.Combined with deep geophysical observations,we believe that the upper and lower crusts of the Jinsha River area north of 29°N are in an entire expanding state,probably caused by the escape-drag effect of material.The presence of a large,low-viscosity region south of 29°N may not enable the entire escape of the crust,but instead result in a differential escape of the lower crust faster than the upper crust.展开更多
This paper examines the performance of Full-Duplex Cooperative Rate Splitting(FD-CRS)with Simultaneous Wireless Information and Power Transfer(SWIPT)support in Multiple Input Single Output(MISO)networks.In a Rate Spli...This paper examines the performance of Full-Duplex Cooperative Rate Splitting(FD-CRS)with Simultaneous Wireless Information and Power Transfer(SWIPT)support in Multiple Input Single Output(MISO)networks.In a Rate Splitting Multiple Access(RSMA)multicast system with two local users and one remote user,the common data stream contains the needs of all users,and all users can decode the common data stream.Therefore,each user can receive some information that other users need,and local users with better channel conditions can use this information to further enhance the reception reliability and data rate of users with poor channel quality.Even using Cell-Center-Users(CCUs)as a cooperative relay to assist the transmission of common data can improve the average system speed.To maximize the minimum achievable rate,we optimize the beamforming vector of Base Station(BS),the common streamsplitting vector,the cooperative distributed beamvector and the strong user transmission power under the power budget constraints of BS and relay devices and the service quality requirements constraints of users.Since the whole problem is not convex,we cannot solve it directly.Therefore,we propose a low complexity algorithm based on Successive Convex Approximation(SCA)technology to find the optimal solution to the problemunder consideration.The simulation results show that FD C-RSMA has better gain andmore powerful than FD C-NOMA,HD C-RSMA,RSMA and NOMA.展开更多
Cyanea nozakii,a common jellyfish distributed in offshore China,has a complex trophic relationship with other zooplankton groups.However,few studies have reported the predation rates and prey selection patterns of C.n...Cyanea nozakii,a common jellyfish distributed in offshore China,has a complex trophic relationship with other zooplankton groups.However,few studies have reported the predation rates and prey selection patterns of C.nozakii medusae on different prey items.Research is also lacking on the intraguild predation of Aurelia coerulea(another common bloom jellyfish in offshore China)by C.nozakii.To address the knowledge gaps,the clearance rates of C.nozakii for different prey items,including copepods(small<1000μm and large>1000μm),fish larvae,and gelatinous prey(hydromedusae,A.coerulea ephyrae,and chaetognaths),were measured.The influence of predator size on the clearance rate was also determined.Additionally,we examined the intraguild predation of C.nozakii on A.coerulea medusae.The clearance rates of C.nozakii varied widely with prey organisms,being independent of prey concentrations.Gelatinous organisms,except for chaetognaths,were captured with considerably high efficiency,followed by fish larvae and copepods,indicating the preferential prey selection of gelatinous organisms by C.nozakii.The clearance rate increased linearly with the cross-sectional area of C.nozakii.Body size in medusae may,to some extents,underpin their capacity to capture more prey by increasing the encounter rate and capture success through ontogeny.C.nozakii preyed voraciously on A.coerulea in high feeding efficiency,but the clearance rate decreased with increasing A.coerulea(as prey)size.This phenomenon of intraguild predation suggests a speculative hypothesis of potential population regulation of A.coerulea by C.nozakii.The information regarding the feeding ecology of C.nozakii reported in this study is important for understanding plankton dynamics in marine ecosystems with extensive occurrences of this jellyfish.展开更多
Interactive holography offers unmatched levels of immersion and user engagement in the field of future display.Despite of the substantial progress has been made in dynamic meta-holography,the realization of real-time,...Interactive holography offers unmatched levels of immersion and user engagement in the field of future display.Despite of the substantial progress has been made in dynamic meta-holography,the realization of real-time,highly smooth interactive holography remains a significant challenge due to the computational and display frame rate limitations.In this study,we introduced a dynamic interactive bitwise meta-holography with ultra-high computational and display frame rates.To our knowledge,this is the first reported practical dynamic interactive metasurface holographic system.We spa-tially divided the metasurface device into multiple distinct channels,each projecting a reconstructed sub-pattern.The switching states of these channels were mapped to bitwise operations on a set of bit values,which avoids complex holo-gram computations,enabling an ultra-high computational frame rate.Our approach achieves a computational frame rate of 800 kHz and a display frame rate of 23 kHz on a low-power Raspberry Pi computational platform.According to this methodology,we demonstrated an interactive dynamic holographic Tetris game system that allows interactive gameplay,color display,and on-the-fly hologram creation.Our technology presents an inspiration for advanced dynamic meta-holography,which is promising for a broad range of applications including advanced human-computer interaction,real-time 3D visualization,and next-generation virtual and augmented reality systems.展开更多
The main objective of this work was to modify the microstructure and enhance the tribological properties of a new Zn-4Si al-loy through a high solidification cooling rate(SCR).According to the results,by increasing th...The main objective of this work was to modify the microstructure and enhance the tribological properties of a new Zn-4Si al-loy through a high solidification cooling rate(SCR).According to the results,by increasing the SCR from 2.0 to 59.5℃/s the average size of primary Si particles and that of the grains reduced from 76.1 and 3780μm to less than about 14.6 and 460μm,respectively.Augment-ing the SCR also enhanced the microstructural homogeneity,decreased the porosity content(by 50%),and increased the matrix hardness(by 36%).These microstructural changes enhanced the tribological behavior.For instance,under the applied pressure of 0.5 MPa,an in-crease in the SCR from 2.0 to 59.5℃/s decreased the wear rate and the average friction coefficient of the alloy by 57%and 23%,respect-ively.The wear mechanism was also changed from the severe delamination,adhesion,and abrasion in the slowly-cooled alloy to the mild tribolayer delamination/abrasion in the high-cooling-rate-solidified sample.展开更多
The dynamic spalling characteristics of rock are important for stability analysis in rock engineering.This paper presented an experimental investigation on the dynamic spalling characteristics of granite with differen...The dynamic spalling characteristics of rock are important for stability analysis in rock engineering.This paper presented an experimental investigation on the dynamic spalling characteristics of granite with different temperatures and strain rates.A series of dynamic spalling tests with different impact velocities were conducted on thermally treated granite at different temperatures.The dynamic spalling strengths of granite with different temperatures and strain rates were determined.A model was proposed to correlate the dynamic spalling strength of granite,high temperature and strain rate.The results show that the spalling strength of granite decreases with increasing temperature.Moreover,the spalling strength of granite with a higher strain rate is larger than that with a lower strain rate.The proposed model can describe the relationship among dynamic spalling strength of granite,high temperature and strain rate.展开更多
BACKGROUND Resistance to clarithromycin(CLA)and levofloxacin(LFX)of Helicobacter pylori(H.pylori)is increasing in severity,and successful eradication is essential.Presently,the eradication success rate has greatly dec...BACKGROUND Resistance to clarithromycin(CLA)and levofloxacin(LFX)of Helicobacter pylori(H.pylori)is increasing in severity,and successful eradication is essential.Presently,the eradication success rate has greatly declined,leaving a large number of patients with previous treatment histories.AIM To investigate secondary resistance rates,explore risk factors for antibiotic resistance,and assess the efficacy of susceptibility-guided therapy.METHODS We recruited 154 subjects positive for Urea Breath Test who attended The First Affiliated Hospital of China Medical University between July 2022 and April 2023.Participants underwent a string test after an overnight fast.The gastric juice was obtained and transferred to vials containing storage solution.Subsequently,DNA extraction and the specific DNA amplification were performed using quantitative polymerase chain reaction(qPCR).Demographic information was also analyzed as part of the study.Based on these results,the participants were administered susceptibility-guided treatment.Efficacy was compared with that of the empiric treatment group.RESULTS A total of 132 individuals tested positive for the H.pylori ureA gene by qPCR technique.CLA resistance rate reached a high level of 82.6%(n=109),LFX resistance rate was 69.7%(n=92)and dual resistance was 62.1%(n=82).Gastric symptoms[odds ratio(OR)=2.782;95%confidence interval(95%CI):1.076-7.194;P=0.035]and rural residence(OR=5.152;95%CI:1.407-18.861;P=0.013)were independent risk factors for secondary resistance to CLA and LFX,respectively.A total of 102 and 100 individuals received susceptibility-guided therapies and empiric treatment,respectively.The antibiotic susceptibility-guided treatment and empiric treatment groups achieved successful eradication rates of 75.5%(77/102)and 59.0%(59/411)by the intention-to-treat(ITT)analysis and 90.6%(77/85)and 70.2%(59/84)by the per-protocol(PP)analysis,respectively.The eradication rates of these two treatment strategies were significantly different in both ITT(P=0.001)and PP(P=0.012)analyses.CONCLUSION H.pylori presented high secondary resistance rates to CLA and LFX.For patients with previous treatment failures,treatments should be guided by antibiotic susceptibility tests or regional antibiotic resistance profile.展开更多
基金supported by the National Natural Science Foundation of China(52272022)the Special Project of Central Government for Local Science and Technology Development of Hubei Province(2019ZYYD076)the Innovation and Entrepreneurship Fund of Wuhan University of Science and Technology(D202202171045002669).
文摘The dissolution of alumina-based refractory ceramics in CaO-Al2O3-SiO_(2)slag melts was performed based on the in-situ observation system of an ultra-high-temperature laser confocal microscope,and the effect of the CaO/SiO_(2)slag mass ratio(C/S ratio)on the dissolution rate of alumina-based refractory ceramics was investigated.The results indicate that the dissolution rate increases with an increase of the C/S ratio and is mainly controlled by diffusion.During the early stage of dissolution,for all C/S ratios,the dissolution process conforms to the classical invariant interface approximation model.During the later stage of dissolution,when the C/S ratio is≥6,the dissolution process is significantly different from the model above because of the formation of a thick interfacial layer,which can be explained by dissolution kinetics.
文摘The aim of this work was to develop, optimize and characterize a silymarin-laden polyvinylpyrrolidone(PVP)-polyethylene glycol(PEG) polymeric composite to resolve low aqueous solubility and dissolution rate problem of the drug. A number of silymarin-laden polymeric formulations were fabricated with different quantities of PVP K-30 and PEG 6000 by the solvent-evaporation method. The effect of PVP K-30 and PEG 6000 on the aqueous solubility and dissolution rate was investigated. The optimized formulation and its constituents were characterized using powder X-ray diffraction(PXRD), differential scanning calorimetry(DSC), scanning electron microscopy(SEM) and Fourier transform infrared spectroscopy(FTIR) techniques. Both the PEG 6000 and PVP K-30 positively affected the aqueous solubility and dissolution rate of the drug. In particular, a formulation consisting of silymarin, PVP K-30 and PEG 6000(0.25/1.5/1.5, w/w/w) furnished the highest solubility(24.3972.95 mg/mL) and an excellent dissolution profile( $100% in 40 min). The solubility enhancement with this formulation was $ 1150-fold as compared to plain silymarin powder. Moreover, all the constituents existed in the amorphous state in this silymarin-laden PVP-PEG polymeric composite. Accordingly, this formulation might be a promising tool to administer silymarin with an enhanced effect via the oral route.
文摘The main objective of this research is to conduct a comprehensive study for enhancing the aqueous solubility of poorly water soluble gliclazide using hydrophilic fumed silica particles (Aerosil®380) and evaluating the influence of silica on drug release profile and pharmacological activity on alloxan induced diabetic rats. Solid dispersions (SD’s) of gliclazide were prepared using solvent evaporation method. The dissolution profiles and solid state characterization of the SD’s prepared were all evaluated. The dissolution rate of gliclazide in the SD’s with fumed silica (weight ratio, 1:1) was approximately 38%, which is about 10 fold higher than that of the pure drug after 30 min. After forming the SD’s, gliclazide changed into an amorphous state, which can infer from differential scanning calorimetry (DSC) and powder X-ray diffraction (PXRD). Fourier transform infrared spectroscopy (FTIR) also revealed the formation of weak hydrogen bonding through the interactions between the secondary amine groups of gliclazide and silanol groups of silica particles in the SD’s. The rapid dissolution rate from the SD’s might be attributed to the amorphization of drug, improved specific surface area and wettability than the original drug crystals. Further, we investigated the antidiabetic effects of SD’s of gliclazide in alloxan induced diabetic rats. The SD’s of gliclazide decrease the blood glucose level 64% whereas the conventional gliclazide decreases only 37% in diabetic rats. Lipid profiles, kidney and liver functions are remarkably improved in diabetic rat treated with SD’s of gliclazide than that of conventional gliclazide. These results suggest that SD’s of gliclazide have much more bioavailability and hence are more pharmacologically active than that of conventional gliclazide form.
基金provided by the U.S. NSF Grant EAR-1225733 to Dr. Chen Zhu, and Indiana University
文摘Kyanite is an important and slow-dissolving mineral. Earlier work has measured its dissolution rate at high temperature and acidic pH, but experimental measurements at low temperature and near neutral p H were lacking. The rate equation by Palandri and Kharaka(A compilation of rate parameters of water–mineral interaction kinetics for application to geochemical modeling. US Geological Survey, Open File Report 2004-1068, 2004) indicates that the rate of kyanite dissolution at room temperature and near neutral pH is on the order of 10^-17 mol m^-2 s^-1, orders of magnitudes slower than most common silicate minerals such as albite and quartz. This study used an externallystirred mixed-flow reactor, which allows high solid:solution ratios, to measure the dissolution rate of kyanite at 0–22 ℃ and pH of 3.5–7.5. The measured dissolution rate of kyanite is 4.6–7.6 9 10-13 mol m^-2 s^-1 at 22℃, and the apparent activation energy is 73.5 kJ mol^-1. This dissolution rate is close to the rate of quartz dissolution and four orders of magnitude faster than the prediction by rate equation of Palandri and Kharaka(2004).Based on our new experimental data, we recommend the following rate equation for modeling the dissolution of kyanite at ambient temperatures.r=ke(-Ea)/R(1/T-1/(298.15))where k = 5.08 9 10-13 mol m^-2 s^-1, and Ea= 73.5 kJ mol^-1. Review of literature data(Carroll in The dissolution behavior of corundum, kaolinite, and andalusite: a surface complex reaction model for the dissolution of aluminosilicate minerals in diagenetic and weathering environs. Dissertation, Northwestern University, 1989) led to a recommended rate equation for andalusite as for T = 25℃ and pH = 2–10:r=k1aH+^n1+k2+k3aH^+^n3where k1= 4.04 9 10^-10 mol m^-2 s^-1, k2= 7.95×10^-10 mol m^-2 s^-1, k3= 1.01×10^-17 mol m^-2 s^-1, n1= 1.2 and n3=-0.6.
基金Projects(51101104,51072121) supported by the National Natural Science Foundation of ChinaProject(LS2010109) supported by the Key Laboratory Foundation of Liaoning Province,China
文摘Determination of dissolution rate of alumina is one of the classical problems in aluminum electrolysis.A novel method which can measure the dissolution rate of alumina was presented.Effect of factors on dissolution rate of alumina was studied intuitively and roundly using transparent quartz electrobath and image analysis techniques.Images about dissolution process of alumina were taken at an interval of fixed time from transparent quartz electrobath of double rooms.Gabor wavelet transforms were used for extracting and describing the texture features of each image.After subsampling several times,the dissolution rate of alumina was computed using these texture features in local neighborhood of samples.Regression equation of the dissolution rate of alumina was obtained using these dissolution rates.Experiments show that the regression equation of the dissolution rate of alumina is y=-0.000 5x3+0.024 0x2-0.287 3x+ 1.276 7 for Na3AlF6-AlF3-Al2O3-CaF2-LiF-MgF2 system at 920 °C.
文摘Aim To study the effect of complexation with hydroxylpmpyl-β-cycledextrin (HP-β-CD) on the solubility, dissolution rate and chemical stability of pmstaglandin E1 (PGE1), thereby providing a basis for preparing a stable solid or aqueous preparation of PGF1 formulated with HP-β-CD. Methods The effect of HP-β-CD on the solubility of PGF1 was studied by phase solubility method. The formation of inclusion complexes of PGE1 with HP-β-CD in the aqueous solution was confirmed by UV spectra, circular dichroism spectroscopy, and that in the solid state by IR spectra and X-ray diffractometry. An solid inclusion complex of PGF1 with HP-β-CD was prepared by lyophilization. The dissolution rate and stability of the inclusion complex were determined and compared with those of PGE1 alone. Meanwhile, the stability of PGF1 aqueous solutions in the presence of HP-β-CD was studied under different pH conditions. Results The solubility of PGF1 increased linearly with increasing HP-β-CD concentration in various pH buffered solutions, showing typical AL-type phase solubility diagrams. The stability and dissolution rate of the solid inclusion complex of PGE1 were significantly increased, compared with those of pure PGE1 . The stability of PGEI in HP-β-CD solutions was also obviously improved under acidic and basic conditions, but the stabilizing effect was absent under neutral conditions. Conclulsions The solubility, dissolution rate and chemical stability of PGE1 are markedly improved by complexation with HP-β-CD. It is quite possible to prepare a stable PGE1 inclusion complex-containing solid dosage forms, but almost impossible to obtain a stable aqueous preparation of PGE1 formulated with HP-β-CD.
基金supported by National Science and Technology Major Projects for "Major New Drugs Innovation and Development"(No.2017ZX09101-001-005,Beijing,China)
文摘The objective of this study was to understand the impact of active pharmaceutical ingredients(API) particle size on a re-developed generic product of glipizide and to improve its formulation so that it exhibits bioequivalent to that of the reference listed drug(RLD). Two commercial batches of APIs(API-1 and API-2) with the same polymorphism and one batch of home-made APIs(API-3) with super-small particle size were used in the present study.The in vitro dissolution profiles of the tested formulations were compared with the RLD in a series of dissolution media. Then, the impact of particle size on in vivo absorption was evaluated in Beagle dogs. Compared with the RLD, formulation A with larger API size showed slower dissolution in p H 6.0 and 7.4 medium, resulting bioinequivalent with the RLD. Conversely, formulation B with smaller API size demonstrated similar in vitro dissolution profiles with the RLD and thus exhibited bioequivalent in the present study. Furthermore, formulation C with super small particle size still exhibited identical oral absorption although rapid dissolution was observed in the tested condition. Herein, it indicated that 2–5 μm might be defined as the "inert size range" of glipizide for ensuring the bioequivalence with the RLD. The results in the present study might help to obtain a better understanding of the variability in raw materials for oral absorption, develop a bioequivalent product and thus post-market quality control.
基金the National Science Foundation Grants (NSF-1360760) to the Critical Zone Observatory Network National Office and NSF-1660923 to Dr.Louis A.Derry through a subaward to Dr.Justin B.Richardson。
文摘Manganese is ubiquitous in terrestrial environments and most studies have focused on dissolution of Mn oxides,but aluminosilicates also release Mn.Here,we evaluated oxic Mn dissolution from six rocks and minerals(amphibolite,anorthosite,kaolinite,kyanite,muscovite,orthoclase feldspar) and soils from four Critical Zone Observatories(CZOs) under four LMWOLs treatments(catechol,citric acid,oxalic acid,control).Overall rock and mineral Mn mass-normalized release was 1.4 ± 0.5 nM μM^(-1) 14 d^(-1) and dissolution rate was 2403 ± 935 nM m^(-2) d^(-1) x 10^(3).Overall CZO soil Mn release was 16.7±5.1 nM μM^(-1) 14 d^(-1) and dissolution rate was 7010 ± 2570 nM m^(-2) d^(-1) × 10^(3).Anorthosite and kyanite had the highest Mn dissolution rates but kaolinite and kyanite had the highest Mn mass-normalized release rates.We hypothesize the structural location of Mn,surface area,and potential inclusions of highly-weatherable-phases control Mn dissolution for rocks and minerals.CZO soils with the highest solid phase Mn had the highest Mn release and dissolution rates.Citric acid and catechol had higher Mn release and dissolution rates than the control while oxalic acid did not.For rocks and minerals,we found pH 4 had higher Mn release and dissolution rates than pH6,but not for control treatments without LMWOL.Our study highlights that the abundance of Mn drove Mn release in soils but not rocks and minerals.Moreover,LMWOLs are important for Mn dissolution,even under acidic pH conditions.
基金Supported by the National Key R&D Program of China(No.2019YFD0900502)。
文摘In recirculating aquaculture systems(RASs),the effective treatment of aquaculture tailwater is essential to maintain the health of the RAS.This study investigated the optimal time and method for tailwater treatment during three periods of the aquaculture of the Litopenaeus vannamei:nursery(0–26 d),middle(27–57 d),and later(57–104 d).The variation of several water parameters during the dissolution of total suspended solid(TSS)in tailwater,applied with the effects of ozone on the microorganism and water quality parameters were investigated.Results showed that the TSS concentrations in tailwater decreased with time,although not significantly(P>0.05),whereas total ammonia nitrogen(TAN),nitrite(NO-2-N),and nitrate(NO_(3)^(-)-N)increased significantly(P<0.05).Therefore,TSS should be removed from the tailwater as early as possible,being most optimal within 4 h.Ozone removed 38.24%–48.95%of TSS,17.78%–90.14%of TAN,and 87.50%–98.90%of NO-2-N after 4 h of treatment.However,it resulted in the significant accumulation of NO_(3)^(-)-N.Moreover,the total number of Vibrio and bacterial counts in aquaculture tailwater was reduced completely by ozone within 4 h.Thus,these results provided technical details and data support for the effective treatment of tailwater from shrimp RAS.
基金Supported by the National Natural Science Foundation of China(42202176)CNPC-Southwest University of Petroleum Innovation Consortium Cooperation Project(2020CX050103).
文摘To clarify the formation and distribution of feldspar dissolution pores and predict the distribution of high-quality reservoir in gravity flow sandstone of the 7^(th) member of Triassic Yanchang Formation(Chang 7 Member)in the Ordos Basin,thin sections,scanning electron microscopy,energy spectrum analysis,X-ray diffraction whole rock analysis,and dissolution experiments are employed in this study to investigate the characteristics and control factors of feldspar dissolution pores.The results show that:(1)Three types of diagenetic processes are observed in the feldspar of Chang 7 sandstone in the study area:secondary overgrowth of feldspar,replacement by clay and calcite,and dissolution of detrital feldspar.(2)The feldspar dissolution of Chang 7 tight sandstone is caused by organic acid,and is further affected by the type of feldspar,the degree of early feldspar alteration,and the buffering effect of mica debris on organic acid.(3)Feldspars have varying degrees of dissolution.Potassium feldspar is more susceptible to dissolution than plagioclase.Among potassium feldspar,orthoclase is more soluble than microcline,and unaltered feldspar is more soluble than early kaolinized or sericitized feldspar.(4)The dissolution experiment demonstrated that the presence of mica can hinder the dissolution of feldspar.Mica of the same mass has a significantly stronger capacity to consume organic acids than feldspar.(5)Dissolution pores in feldspar of Chang 7 Member are more abundant in areas with low mica content,and they improve the reservoir physical properties,while in areas with high mica content,the number of feldspar dissolution pores decreases significantly.
基金supported by the Key Research Program of the Chinese Academy of Sciences(grant number ZDRW-ZS-2021-1-2).
文摘Pulse rate is one of the important characteristics of traditional Chinese medicine pulse diagnosis,and it is of great significance for determining the nature of cold and heat in diseases.The prediction of pulse rate based on facial video is an exciting research field for getting palpation information by observation diagnosis.However,most studies focus on optimizing the algorithm based on a small sample of participants without systematically investigating multiple influencing factors.A total of 209 participants and 2,435 facial videos,based on our self-constructed Multi-Scene Sign Dataset and the public datasets,were used to perform a multi-level and multi-factor comprehensive comparison.The effects of different datasets,blood volume pulse signal extraction algorithms,region of interests,time windows,color spaces,pulse rate calculation methods,and video recording scenes were analyzed.Furthermore,we proposed a blood volume pulse signal quality optimization strategy based on the inverse Fourier transform and an improvement strategy for pulse rate estimation based on signal-to-noise ratio threshold sliding.We found that the effects of video estimation of pulse rate in the Multi-Scene Sign Dataset and Pulse Rate Detection Dataset were better than in other datasets.Compared with Fast independent component analysis and Single Channel algorithms,chrominance-based method and plane-orthogonal-to-skin algorithms have a more vital anti-interference ability and higher robustness.The performances of the five-organs fusion area and the full-face area were better than that of single sub-regions,and the fewer motion artifacts and better lighting can improve the precision of pulse rate estimation.
基金supported by the NSFC(11931013)the GXNSF(2022GXNSFDA035078)。
文摘In this paper,we study the one-dimensional motion of viscous gas near a vacuum,with the gas connecting to a vacuum state with a jump in density.The interface behavior,the pointwise decay rates of the density function and the expanding rates of the interface are obtained with the viscosity coefficientμ(ρ)=ρ^(α)for any 0<α<1;this includes the timeweighted boundedness from below and above.The smoothness of the solution is discussed.Moreover,we construct a class of self-similar classical solutions which exhibit some interesting properties,such as optimal estimates.The present paper extends the results in[Luo T,Xin Z P,Yang T.SIAM J Math Anal,2000,31(6):1175-1191]to the jump boundary conditions case with density-dependent viscosity.
基金supported by grants from the Ministry of Science and Technology(Grant Nos.2021FY100101,2019QZKK0901)the National Natural Science Foundation of China(Grant Nos.41941016,42230312,42020104007)China Geological Survey(Grant No.DD20221630).
文摘The Earth’s surface kinematics and deformation are fundamental to understanding crustal evolution.An effective research approach is to estimate regional motion field and deformation fields based on modern geodetic networks.If the discrete observed velocity field is obtained,the velocity related fields,such as dilatation rate and maximum shear strain rate,can be estimated by applying varied mathematical approaches.This study applied Akaike's Bayesian Information Criterion(ABIC)method to calculate strain rate fields constrained by GPS observations in the southeast Tibetan Plateau.Comparison with results derived from other three methods revealed that our ABIC-derived strain rate fields were more precise.The maximum shear strain rate highlighted the Xianshuihe–Xiaojiang fault system as the main boundary for the outward migration of material in southeastern Tibet,indicating rotation of eastern Tibet material around the eastern Himalaya rather than whole extrusion along a fixed channel.Additionally,distinct dilatation rate patterns in the northeast and southwest regions of the fault system were observed.The northeast region,represented by the Longmenshan area,exhibited negative dilatational anomalies;while the southwest region,represented by the Jinsha River area north of 29°N,displayed positive dilatational anomalies.This indicates compression in the former and extension in the latter.Combined with deep geophysical observations,we believe that the upper and lower crusts of the Jinsha River area north of 29°N are in an entire expanding state,probably caused by the escape-drag effect of material.The presence of a large,low-viscosity region south of 29°N may not enable the entire escape of the crust,but instead result in a differential escape of the lower crust faster than the upper crust.
基金This work is supported by Special Fund Project for Technology Innovation of Xuzhou City in 2022(KC22083)Jiangsu Province Key Research and Development(Modern Agriculture)Project(BE2019333)and(BE2019334)+1 种基金Guangzhou Basic Research Program Municipal School(College)Joint Funding Project underGrant 2023A03J0111Innovation Project of Jiangsu Province(SJCK21_1133).
文摘This paper examines the performance of Full-Duplex Cooperative Rate Splitting(FD-CRS)with Simultaneous Wireless Information and Power Transfer(SWIPT)support in Multiple Input Single Output(MISO)networks.In a Rate Splitting Multiple Access(RSMA)multicast system with two local users and one remote user,the common data stream contains the needs of all users,and all users can decode the common data stream.Therefore,each user can receive some information that other users need,and local users with better channel conditions can use this information to further enhance the reception reliability and data rate of users with poor channel quality.Even using Cell-Center-Users(CCUs)as a cooperative relay to assist the transmission of common data can improve the average system speed.To maximize the minimum achievable rate,we optimize the beamforming vector of Base Station(BS),the common streamsplitting vector,the cooperative distributed beamvector and the strong user transmission power under the power budget constraints of BS and relay devices and the service quality requirements constraints of users.Since the whole problem is not convex,we cannot solve it directly.Therefore,we propose a low complexity algorithm based on Successive Convex Approximation(SCA)technology to find the optimal solution to the problemunder consideration.The simulation results show that FD C-RSMA has better gain andmore powerful than FD C-NOMA,HD C-RSMA,RSMA and NOMA.
基金the Strategic Priority Research Program of the Chinese Academy of Sciences(No.XDA19060203)the National Natural Science Foundation of China(Nos.42076166,42130411)+4 种基金the Natural Science Foundation of Shandong Province(No.ZR2021QD061)the CAS-CSIRO Project Fund(No.GJHZ1888)the Mount Tai Scholar Climbing Plan to Song SUNthe Innovation Team of Fishery Resources and Ecology in the Yellow Sea and Bohai Sea(No.2020TD01)the Hainan Province Basic and Applied Basic Research Program(Natural Science Field)High-Level Talent Project(No.2019RC353)。
文摘Cyanea nozakii,a common jellyfish distributed in offshore China,has a complex trophic relationship with other zooplankton groups.However,few studies have reported the predation rates and prey selection patterns of C.nozakii medusae on different prey items.Research is also lacking on the intraguild predation of Aurelia coerulea(another common bloom jellyfish in offshore China)by C.nozakii.To address the knowledge gaps,the clearance rates of C.nozakii for different prey items,including copepods(small<1000μm and large>1000μm),fish larvae,and gelatinous prey(hydromedusae,A.coerulea ephyrae,and chaetognaths),were measured.The influence of predator size on the clearance rate was also determined.Additionally,we examined the intraguild predation of C.nozakii on A.coerulea medusae.The clearance rates of C.nozakii varied widely with prey organisms,being independent of prey concentrations.Gelatinous organisms,except for chaetognaths,were captured with considerably high efficiency,followed by fish larvae and copepods,indicating the preferential prey selection of gelatinous organisms by C.nozakii.The clearance rate increased linearly with the cross-sectional area of C.nozakii.Body size in medusae may,to some extents,underpin their capacity to capture more prey by increasing the encounter rate and capture success through ontogeny.C.nozakii preyed voraciously on A.coerulea in high feeding efficiency,but the clearance rate decreased with increasing A.coerulea(as prey)size.This phenomenon of intraguild predation suggests a speculative hypothesis of potential population regulation of A.coerulea by C.nozakii.The information regarding the feeding ecology of C.nozakii reported in this study is important for understanding plankton dynamics in marine ecosystems with extensive occurrences of this jellyfish.
基金supports from National Natural Science Foundation of China (Grant No.62205117,52275429)National Key Research and Development Program of China (Grant No.2021YFF0502700)+3 种基金Young Elite Scientists Sponsorship Program by CAST (Grant No.2022QNRC001)West Light Foundation of the Chinese Academy of Sciences (Grant No.xbzg-zdsys-202206)Knowledge Innovation Program of Wuhan-Shuguang,Innovation project of Optics Valley Laboratory (Grant No.OVL2021ZD002)Hubei Provincial Natural Science Foundation of China (Grant No.2022CFB792).
文摘Interactive holography offers unmatched levels of immersion and user engagement in the field of future display.Despite of the substantial progress has been made in dynamic meta-holography,the realization of real-time,highly smooth interactive holography remains a significant challenge due to the computational and display frame rate limitations.In this study,we introduced a dynamic interactive bitwise meta-holography with ultra-high computational and display frame rates.To our knowledge,this is the first reported practical dynamic interactive metasurface holographic system.We spa-tially divided the metasurface device into multiple distinct channels,each projecting a reconstructed sub-pattern.The switching states of these channels were mapped to bitwise operations on a set of bit values,which avoids complex holo-gram computations,enabling an ultra-high computational frame rate.Our approach achieves a computational frame rate of 800 kHz and a display frame rate of 23 kHz on a low-power Raspberry Pi computational platform.According to this methodology,we demonstrated an interactive dynamic holographic Tetris game system that allows interactive gameplay,color display,and on-the-fly hologram creation.Our technology presents an inspiration for advanced dynamic meta-holography,which is promising for a broad range of applications including advanced human-computer interaction,real-time 3D visualization,and next-generation virtual and augmented reality systems.
文摘The main objective of this work was to modify the microstructure and enhance the tribological properties of a new Zn-4Si al-loy through a high solidification cooling rate(SCR).According to the results,by increasing the SCR from 2.0 to 59.5℃/s the average size of primary Si particles and that of the grains reduced from 76.1 and 3780μm to less than about 14.6 and 460μm,respectively.Augment-ing the SCR also enhanced the microstructural homogeneity,decreased the porosity content(by 50%),and increased the matrix hardness(by 36%).These microstructural changes enhanced the tribological behavior.For instance,under the applied pressure of 0.5 MPa,an in-crease in the SCR from 2.0 to 59.5℃/s decreased the wear rate and the average friction coefficient of the alloy by 57%and 23%,respect-ively.The wear mechanism was also changed from the severe delamination,adhesion,and abrasion in the slowly-cooled alloy to the mild tribolayer delamination/abrasion in the high-cooling-rate-solidified sample.
基金supported by the Beijing Natural Science Foundation,China(Grant No.JQ20039)National Natural Science Foundation of China(Grant No.12172019).
文摘The dynamic spalling characteristics of rock are important for stability analysis in rock engineering.This paper presented an experimental investigation on the dynamic spalling characteristics of granite with different temperatures and strain rates.A series of dynamic spalling tests with different impact velocities were conducted on thermally treated granite at different temperatures.The dynamic spalling strengths of granite with different temperatures and strain rates were determined.A model was proposed to correlate the dynamic spalling strength of granite,high temperature and strain rate.The results show that the spalling strength of granite decreases with increasing temperature.Moreover,the spalling strength of granite with a higher strain rate is larger than that with a lower strain rate.The proposed model can describe the relationship among dynamic spalling strength of granite,high temperature and strain rate.
基金The study was reviewed and approved by the the Human Ethics Review Committee of the First Affiliated Hospital of China Medical University(Approval No.2021325).
文摘BACKGROUND Resistance to clarithromycin(CLA)and levofloxacin(LFX)of Helicobacter pylori(H.pylori)is increasing in severity,and successful eradication is essential.Presently,the eradication success rate has greatly declined,leaving a large number of patients with previous treatment histories.AIM To investigate secondary resistance rates,explore risk factors for antibiotic resistance,and assess the efficacy of susceptibility-guided therapy.METHODS We recruited 154 subjects positive for Urea Breath Test who attended The First Affiliated Hospital of China Medical University between July 2022 and April 2023.Participants underwent a string test after an overnight fast.The gastric juice was obtained and transferred to vials containing storage solution.Subsequently,DNA extraction and the specific DNA amplification were performed using quantitative polymerase chain reaction(qPCR).Demographic information was also analyzed as part of the study.Based on these results,the participants were administered susceptibility-guided treatment.Efficacy was compared with that of the empiric treatment group.RESULTS A total of 132 individuals tested positive for the H.pylori ureA gene by qPCR technique.CLA resistance rate reached a high level of 82.6%(n=109),LFX resistance rate was 69.7%(n=92)and dual resistance was 62.1%(n=82).Gastric symptoms[odds ratio(OR)=2.782;95%confidence interval(95%CI):1.076-7.194;P=0.035]and rural residence(OR=5.152;95%CI:1.407-18.861;P=0.013)were independent risk factors for secondary resistance to CLA and LFX,respectively.A total of 102 and 100 individuals received susceptibility-guided therapies and empiric treatment,respectively.The antibiotic susceptibility-guided treatment and empiric treatment groups achieved successful eradication rates of 75.5%(77/102)and 59.0%(59/411)by the intention-to-treat(ITT)analysis and 90.6%(77/85)and 70.2%(59/84)by the per-protocol(PP)analysis,respectively.The eradication rates of these two treatment strategies were significantly different in both ITT(P=0.001)and PP(P=0.012)analyses.CONCLUSION H.pylori presented high secondary resistance rates to CLA and LFX.For patients with previous treatment failures,treatments should be guided by antibiotic susceptibility tests or regional antibiotic resistance profile.
