Objective Incidences of post-transurethral resection of the prostate(post-TURP)strictures are between 2.2%and 9.8%.Stricture commonly occurs within the first 6 months.Our objective was to assess the outcomes of patien...Objective Incidences of post-transurethral resection of the prostate(post-TURP)strictures are between 2.2%and 9.8%.Stricture commonly occurs within the first 6 months.Our objective was to assess the outcomes of patients with obliterative strictures post-TURP that underwent a double-face urethroplasty.Methods This is a single-center prospective study of 17 patients with obliterative proximal bulbar stricture post-TURP who underwent double-face graft urethroplasty by two surgeons between January 2014 and January 2020.We defined post-TURP obliterative strictures as those patients who presented with complete or almost complete obstruction of the urethral lumen and who have had a history of acute urine retention.We have excluded patients with bladder neck contracture.Primary outcome was treatment success,defined as the no need for further treatments.Secondary outcome was post-urethroplasty continent rate.Results Seventeen patients were included in the study with median age of 66(interquartile range 40-77)years;median time of follow-up was 24(interquartile range 12-84)months;median stricture length was 4(interquartile range 2-6)cm.Of the 17 patients,15(88.2%)were successful.All patients were continent after urethroplasty.Conclusion With mid-term follow-up,treatment of obliterative proximal bulbar strictures with double-face buccal mucosa graft is a safe and effective procedure.Obliterative proximal bulbar strictures merit double-face urethroplasty with high-rate success and functional outcomes.展开更多
The application of a double-face reinforced retaining wall during road construction can reduce engineering costs, speed road paving and have a good influence on environment. An ABAQUS numerical model of a double-face ...The application of a double-face reinforced retaining wall during road construction can reduce engineering costs, speed road paving and have a good influence on environment. An ABAQUS numerical model of a double-face reinforced retaining wall was built. The influence of surface subsidence induced by mining was considered. A physical model test was also performed in the laboratory on a reinforced retaining wall. The influence of subsidence induced by mining was observed. The numerical results match measurements in the laboratory very well. The vertical pressure on the base of the retaining wall, the horizontal displacement of the wall and the horizontal soil pressure acting on the wall were analyzed. The differential settlement of the reinforced belt and axial forces in the wall were also studied.展开更多
The wear patterns for drum-style automotive brakes tend to enlarge internal drum diameters. Such enlargement is most profound when used brake drums are machined to restore the metal friction surfaces. Specialized arc ...The wear patterns for drum-style automotive brakes tend to enlarge internal drum diameters. Such enlargement is most profound when used brake drums are machined to restore the metal friction surfaces. Specialized arc grinding machinery has been used to match replacement shoe-style brake friction materials to enlarged drums. The process of arc grinding removes friction material, thereby producing dust. When organic-style friction materials contained asbestos, use of arc grinding machinery posed an asbestos fiber exposure risk to operators and proximate personnel. The manufacturers of arc grinding machinery have incorporated local exhaust ventilation systems designed to capture and remove this dust at the point of grinding contact and propel this dust into collection bags or other systems. This research was designed to evaluate the dust capture and retention characteristics of a specific arc grinder product, when used to custom grind asbestos-containing brake friction materials. A Bear Model 1420 automotive brake shoe arc grinder was the subject of this study. During two separate but consecutive test sessions, newly relined sets of shoe-style automobile brake friction materials were precision ground. Both area and personal air samples were collected throughout each testing session. This work took place within a closed and unventilated metal building, with total interior volume of 2500 m<sup>3</sup>. Collected air samples were analyzed using phase contrast microscopy (PCM) and transmission electron microscopy (TEM). The results of analysis using PCM for personal samples (n = 6) ranged from <0.044 to 0.055 fibers per cc (f/cc) (mean 0.05). Follow-up analysis of these personal samples using TEM indicated asbestos-adjusted PCM exposures ranging from <0.0074 to 0.055 f/cc (mean ≤ 0.041). Area air samples, taken at distances ranging from 1.5 to 9 meters from the arc grinder (n = 12), showed asbestos-adjusted PCM concentrations ranging from <0.0075 to 0.041 f/cc (mean ≤ 0.017). The process of custom arc grinding shoe-style, asbestos-containing brake friction materials can cause exposure to airborne asbestos fibers. However, when done using properly equipped arc grinding machines, such exposures are not expected to exceed the current occupational exposure limits for asbestos of 0.1 f/cc 8-hour time-weighted average (TWA) or 1.0 f/cc 30-minute average.展开更多
The present work emphasizes the isolation of cellulose nanofiber(CNF)from the kenaf(Hibiscus cannabinus)bast through a chemo-mechanical process.In order to develop high CNF yield with superior properties of CNF for im...The present work emphasizes the isolation of cellulose nanofiber(CNF)from the kenaf(Hibiscus cannabinus)bast through a chemo-mechanical process.In order to develop high CNF yield with superior properties of CNF for improving compatibility in varied applications this method is proposed.The fiber purification involved pulping and bleaching treatments,whereas mechanical treatment was performed by grinding and high-pressure treatments.The kraft pulping as a delignification method followed by bleaching has successfully removed almost 99%lignin in the fiber with high pulp yield and delignification selectivity.The morphology of the fibers was characterized by scanning electron microscopy,which showed a smooth surface,fiber bundles,gel-shaped nanofiber,and an average size of 94.05 nm with 69%of CNF in 34–100 nm size.The chemo-mechanical process exhibited a more crystalline nature in CNF than pulp kenaf.The low zeta potential values exhibit the distribution of fibrils and colloidal suspension stability without any further agglomeration.A lower concentration of CNF is less stable exhibiting the product agglomeration.Therefore,the chemo-mechanical process for the isolation of CNF(Hibiscus cannabinus)from kenaf involves sustainable,low-cost,non-toxic,and cheap alternatives than other traditional methods.展开更多
文摘Objective Incidences of post-transurethral resection of the prostate(post-TURP)strictures are between 2.2%and 9.8%.Stricture commonly occurs within the first 6 months.Our objective was to assess the outcomes of patients with obliterative strictures post-TURP that underwent a double-face urethroplasty.Methods This is a single-center prospective study of 17 patients with obliterative proximal bulbar stricture post-TURP who underwent double-face graft urethroplasty by two surgeons between January 2014 and January 2020.We defined post-TURP obliterative strictures as those patients who presented with complete or almost complete obstruction of the urethral lumen and who have had a history of acute urine retention.We have excluded patients with bladder neck contracture.Primary outcome was treatment success,defined as the no need for further treatments.Secondary outcome was post-urethroplasty continent rate.Results Seventeen patients were included in the study with median age of 66(interquartile range 40-77)years;median time of follow-up was 24(interquartile range 12-84)months;median stricture length was 4(interquartile range 2-6)cm.Of the 17 patients,15(88.2%)were successful.All patients were continent after urethroplasty.Conclusion With mid-term follow-up,treatment of obliterative proximal bulbar strictures with double-face buccal mucosa graft is a safe and effective procedure.Obliterative proximal bulbar strictures merit double-face urethroplasty with high-rate success and functional outcomes.
基金Projects 50874105 supported by the National Natural Science Foundation of China20070290532 by the Specialized Research Fund for Doctoral Program of Higher Education
文摘The application of a double-face reinforced retaining wall during road construction can reduce engineering costs, speed road paving and have a good influence on environment. An ABAQUS numerical model of a double-face reinforced retaining wall was built. The influence of surface subsidence induced by mining was considered. A physical model test was also performed in the laboratory on a reinforced retaining wall. The influence of subsidence induced by mining was observed. The numerical results match measurements in the laboratory very well. The vertical pressure on the base of the retaining wall, the horizontal displacement of the wall and the horizontal soil pressure acting on the wall were analyzed. The differential settlement of the reinforced belt and axial forces in the wall were also studied.
文摘The wear patterns for drum-style automotive brakes tend to enlarge internal drum diameters. Such enlargement is most profound when used brake drums are machined to restore the metal friction surfaces. Specialized arc grinding machinery has been used to match replacement shoe-style brake friction materials to enlarged drums. The process of arc grinding removes friction material, thereby producing dust. When organic-style friction materials contained asbestos, use of arc grinding machinery posed an asbestos fiber exposure risk to operators and proximate personnel. The manufacturers of arc grinding machinery have incorporated local exhaust ventilation systems designed to capture and remove this dust at the point of grinding contact and propel this dust into collection bags or other systems. This research was designed to evaluate the dust capture and retention characteristics of a specific arc grinder product, when used to custom grind asbestos-containing brake friction materials. A Bear Model 1420 automotive brake shoe arc grinder was the subject of this study. During two separate but consecutive test sessions, newly relined sets of shoe-style automobile brake friction materials were precision ground. Both area and personal air samples were collected throughout each testing session. This work took place within a closed and unventilated metal building, with total interior volume of 2500 m<sup>3</sup>. Collected air samples were analyzed using phase contrast microscopy (PCM) and transmission electron microscopy (TEM). The results of analysis using PCM for personal samples (n = 6) ranged from <0.044 to 0.055 fibers per cc (f/cc) (mean 0.05). Follow-up analysis of these personal samples using TEM indicated asbestos-adjusted PCM exposures ranging from <0.0074 to 0.055 f/cc (mean ≤ 0.041). Area air samples, taken at distances ranging from 1.5 to 9 meters from the arc grinder (n = 12), showed asbestos-adjusted PCM concentrations ranging from <0.0075 to 0.041 f/cc (mean ≤ 0.017). The process of custom arc grinding shoe-style, asbestos-containing brake friction materials can cause exposure to airborne asbestos fibers. However, when done using properly equipped arc grinding machines, such exposures are not expected to exceed the current occupational exposure limits for asbestos of 0.1 f/cc 8-hour time-weighted average (TWA) or 1.0 f/cc 30-minute average.
基金supports from the National Natural Science Foundation of China (No.52264030)the Yunnan Fundamental Research Projects,China (No.202201BE070001-048)the Special Fund Projects of Central Government Guiding Local Science and Technology Development,China (No.202107AA110002).
基金Ministry of Education,Culture,Research and Technology(KEMENDIKBUDRISTEK)Republic of Indonesia,for providing the Research Grant“Basic Research Scheme”No.110/E5/PG.02.00.PL/2023.
文摘The present work emphasizes the isolation of cellulose nanofiber(CNF)from the kenaf(Hibiscus cannabinus)bast through a chemo-mechanical process.In order to develop high CNF yield with superior properties of CNF for improving compatibility in varied applications this method is proposed.The fiber purification involved pulping and bleaching treatments,whereas mechanical treatment was performed by grinding and high-pressure treatments.The kraft pulping as a delignification method followed by bleaching has successfully removed almost 99%lignin in the fiber with high pulp yield and delignification selectivity.The morphology of the fibers was characterized by scanning electron microscopy,which showed a smooth surface,fiber bundles,gel-shaped nanofiber,and an average size of 94.05 nm with 69%of CNF in 34–100 nm size.The chemo-mechanical process exhibited a more crystalline nature in CNF than pulp kenaf.The low zeta potential values exhibit the distribution of fibrils and colloidal suspension stability without any further agglomeration.A lower concentration of CNF is less stable exhibiting the product agglomeration.Therefore,the chemo-mechanical process for the isolation of CNF(Hibiscus cannabinus)from kenaf involves sustainable,low-cost,non-toxic,and cheap alternatives than other traditional methods.
