In this article,we study Kahler metrics on a certain line bundle over some compact Kahler manifolds to find complete Kahler metrics with positive holomorphic sectional(or bisectional)curvatures.Thus,we apply a strateg...In this article,we study Kahler metrics on a certain line bundle over some compact Kahler manifolds to find complete Kahler metrics with positive holomorphic sectional(or bisectional)curvatures.Thus,we apply a strategy to a famous Yau conjecture with a co-homogeneity one geometry.展开更多
Lithium metal batteries are regarded as prominent contenders to address the pressing needs owing to the high theoretical capacity.Toward the broader implementation,the primary obstacle lies in the intricate multi-elec...Lithium metal batteries are regarded as prominent contenders to address the pressing needs owing to the high theoretical capacity.Toward the broader implementation,the primary obstacle lies in the intricate multi-electron,multi-step redox reaction associated with sluggish conversion kinetics,subsequently giving rise to a cascade of parasitic issues.In order to smooth reaction kinetics,catalysts are widely introduced to accelerate reaction rate via modulating the energy barrier.Over past decades,a large amount of research has been devoted to the catalyst design and catalytic mechanism exploration,and thus the great progress in electrochemical performance has been realized.Therefore,it is necessary to make a comprehensive review toward key progress in catalyst design and future development pathway.In this review,the basic mechanism of lithium metal batteries is provided along with corresponding advantages and existing challenges detailly described.The main catalysts employed to accelerate cathode reaction with emphasis on their catalytic mechanism are summarized as well.Finally,the rational design and innovative direction toward efficient catalysts are suggested for future application in metal-sulfur/gas battery and beyond.This review is expected to drive and benefit future research on rational catalyst design with multi-parameter synergistic impacts on the activity and stability of next-generation metal battery,thus opening new avenue for sustainable solution to climate change,energy and environmental issues,and the potential industrial economy.展开更多
This paper investigates the homogeneity of United States aircraft reconnaissance data and the impact of these data on the homogeneity of the tropical cyclone(TC)best track data for the seasons 1949-1987 generated by t...This paper investigates the homogeneity of United States aircraft reconnaissance data and the impact of these data on the homogeneity of the tropical cyclone(TC)best track data for the seasons 1949-1987 generated by the China Meteorological Administration(CMA).The evaluation of the reconnaissance data shows that the minimum central sea level pressure(MCP)data are relatively homogeneous,whereas the maximum sustained wind(MSW)data show both overestimations and spurious abrupt changes.Statistical comparisons suggest that both the reconnaissance MCP and MSW were well incorporated into the CMA TC best track dataset.Although no spurious abrupt changes were evident in the reconnaissance-related best track MCP data,two spurious changepoints were identified in the remainder of the best-track MCP data.Furthermore,the influence of the reconnaissance MSWs seems to extend to the best track MSWs unrelated to reconnaissance,which might reflect the optimistic confidence in making higher estimates due to the overestimated extreme wind“observations”.In addition,the overestimation of either the reconnaissance MSWs or the best track MSWs was greater during the early decades compared to later decades,which reflects the important influence of reconnaissance data on the CMA TC best track dataset.The wind-pressure relationship(WPR)used in the CMA TC best track dataset is also evaluated and is found to overestimate the MSW,which may lead to inhomogeneity within the dataset between the aircraft reconnaissance era and the satellite era.展开更多
Laser-arc hybrid welding of AZ31B magnesium alloy was carried out,the effects of welding parameters on weld formation,microstructure homogeneity and mechanical properties were investigated.The results showed that lase...Laser-arc hybrid welding of AZ31B magnesium alloy was carried out,the effects of welding parameters on weld formation,microstructure homogeneity and mechanical properties were investigated.The results showed that laser-arc hybrid welding was beneficial to improve the weld formation of magnesium alloy by inhibiting the defect of undercut and pores.The weld microstructure was mainly columnar grains neighboring the fusion line and equiaxed grains at the weld center.It was interesting that the grain size at the upper arc zone was smaller than that at the lower laser zone,with the difference mainly affected by laser power rather than welding current and welding speed.The welding parameters were optimized as laser power of 3.5 kW,welding current of 100 A and welding speed of 1.5 m/min.In this case,the weld was free of undercut and pores,and the tensile strength and elongation rate reached 252 MPa and 11.2%,respectively.Finally,the microstructure homogeneity was illustrated according to the heat distribution,and the evolution law of tensile properties was discussed basing on the weld formation and microstructure characteristics.展开更多
This article proposes a modeling method for C/C-ZrC composite materials.According to the superposition of Gaussian random field,the original gray model is obtained,and the threshold segmentation method is used to gene...This article proposes a modeling method for C/C-ZrC composite materials.According to the superposition of Gaussian random field,the original gray model is obtained,and the threshold segmentation method is used to generate the C-ZrC inclusion model.Finally,the fiber structure is added to construct the microstructure of the three-phase plain weave composite.The reconstructed inclusions can meet the randomness of the shape and have a uniform distribution.Using an algorithm based on asymptotic homogenization and finite element method,the equivalent thermal conductivity prediction of the microstructure finite element model was carried out,and the influence of component volume fraction on material thermal properties was explored.The sensitivity of model parameters was studied,including the size,mesh sensitivity,Gaussian complexity,and correlation length of the RVE model,and the optimal calculation model was selected.The results indicate that the volume fraction of the inclusion phase has a significant impact on the equivalent thermal conductivity of the material.As the volume fraction of carbon fiber and ZrC increases,the equivalent thermal conductivity tensor gradually decreases.This model can be used to explore the impact of materialmicrostructure on the results,and numerical simulations have studied the relationship between structure and performance,providing the possibility of designing microstructure based on performance.展开更多
Formamidine lead triiodide(FAPbI_(3))perovskites have become the most promising photovoltaic materials for perovskite solar cells with record power conversion efficiency(PCE).However,random nucleation,phase transition...Formamidine lead triiodide(FAPbI_(3))perovskites have become the most promising photovoltaic materials for perovskite solar cells with record power conversion efficiency(PCE).However,random nucleation,phase transition,and lattice defects are still the key challenges limiting the quality of FAPbI_(3) films.Previous studies show that the introduction or adding of seeds in the precursor is effective to promote the nucleation and crystallization of perovskite films.Nevertheless,the seed-assisted approach focuses on heterogeneous seeds or hetero-composites,which inevitably induce a lattice-mismatch,the genera-tion of strain or defects,and the phase segregation in the perovskite films.Herein,we first demonstrate that high-quality perovskite films are controllably prepared using α-and δ-phases mixed FAPbI_(3) micro-crystal as the homogeneous seeds with the one-step antisolvent method.The partially dissolved seeds with suitable sizes improve the crystallinity of the perovskite flm with preferable orientation,improved carrier lifetime,and increased carrier mobility.More importantly,the α-phase-containing seeds promote the formation of α-phase FAPbI_(3) films,leading to the reduction of residual lattice strain and the suppres-sion of I-ion migration.Besides,the adding of dimethyl 2,6-pyridine dicarboxylate(DPD)into the pre-cursor further suppresses the generation of defects,contributing to the PCE of devices prepared in air ambient being significantly improved to 23.75%,among the highest PCEs for fully air-processed FAPbI_(3) solar cells.The unpackaged target devices possess a high stability,maintaining 80%of the initial PCE under simulated solar illumination exceeding 800 h.展开更多
Determining homogeneous domains statistically is helpful for engineering geological modeling and rock mass stability evaluation.In this text,a technique that can integrate lithology,geotechnical and structural informa...Determining homogeneous domains statistically is helpful for engineering geological modeling and rock mass stability evaluation.In this text,a technique that can integrate lithology,geotechnical and structural information is proposed to delineate homogeneous domains.This technique is then applied to a high and steep slope along a road.First,geological and geotechnical domains were described based on lithology,faults,and shear zones.Next,topological manifolds were used to eliminate the incompatibility between orientations and other parameters(i.e.trace length and roughness)so that the data concerning various properties of each discontinuity can be matched and characterized in the same Euclidean space.Thus,the influence of implicit combined effect in between parameter sequences on the homogeneous domains could be considered.Deep learning technique was employed to quantify abstract features of the characterization images of discontinuity properties,and to assess the similarity of rock mass structures.The results show that the technique can effectively distinguish structural variations and outperform conventional methods.It can handle multisource engineering geological information and multiple discontinuity parameters.This technique can also minimize the interference of human factors and delineate homogeneous domains based on orientations or multi-parameter with arbitrary distributions to satisfy different engineering requirements.展开更多
Adaptive detection of range-spread targets is considered in the presence of subspace interference plus Gaussian clutter with unknown covariance matrix.The target signal and interference are supposed to lie in two line...Adaptive detection of range-spread targets is considered in the presence of subspace interference plus Gaussian clutter with unknown covariance matrix.The target signal and interference are supposed to lie in two linearly independent subspaces with deterministic but unknown coordinates.Relying on the two-step criteria,two adaptive detectors based on Gradient tests are proposed,in homogeneous and partially homogeneous clutter plus subspace interference,respectively.Both of the proposed detectors exhibit theoretically constant false alarm rate property against unknown clutter covariance matrix as well as the power level.Numerical results show that,the proposed detectors have better performance than their existing counterparts,especially for mismatches in the signal steering vectors.展开更多
The article synthesizes and presents the results regarding the stability of positive homogeneous systems that have been researched and published in recent years. Next, we provide a sufficient condition for global expo...The article synthesizes and presents the results regarding the stability of positive homogeneous systems that have been researched and published in recent years. Next, we provide a sufficient condition for global exponential stability in the case of discrete-time positive homogeneous systems with an order less than one with time-varying delays.展开更多
Second-generation high-temperature superconducting(HTS)conductors,specifically rare earth-barium-copper-oxide(REBCO)coated conductor(CC)tapes,are promising candidates for high-energy and high-field superconducting app...Second-generation high-temperature superconducting(HTS)conductors,specifically rare earth-barium-copper-oxide(REBCO)coated conductor(CC)tapes,are promising candidates for high-energy and high-field superconducting applications.With respect to epoxy-impregnated REBCO composite magnets that comprise multilayer components,the thermomechanical characteristics of each component differ considerably under extremely low temperatures and strong electromagnetic fields.Traditional numerical models include homogenized orthotropic models,which simplify overall field calculation but miss detailed multi-physics aspects,and full refinement(FR)ones that are thorough but computationally demanding.Herein,we propose an extended multi-scale approach for analyzing the multi-field characteristics of an epoxy-impregnated composite magnet assembled by HTS pancake coils.This approach combines a global homogenization(GH)scheme based on the homogenized electromagnetic T-A model,a method for solving Maxwell's equations for superconducting materials based on the current vector potential T and the magnetic field vector potential A,and a homogenized orthotropic thermoelastic model to assess the electromagnetic and thermoelastic properties at the macroscopic scale.We then identify“dangerous regions”at the macroscopic scale and obtain finer details using a local refinement(LR)scheme to capture the responses of each component material in the HTS composite tapes at the mesoscopic scale.The results of the present GH-LR multi-scale approach agree well with those of the FR scheme and the experimental data in the literature,indicating that the present approach is accurate and efficient.The proposed GH-LR multi-scale approach can serve as a valuable tool for evaluating the risk of failure in large-scale HTS composite magnets.展开更多
With the continuous expansion of medical student enrollment,the number of clinical teaching bases is gradually increasing.However,there are significant differences in clinical teaching management models and teaching l...With the continuous expansion of medical student enrollment,the number of clinical teaching bases is gradually increasing.However,there are significant differences in clinical teaching management models and teaching levels among different bases.Most clinical teaching bases have incomplete teaching management systems,inadequate teaching management institutions,insufficient teaching personnel,and inadequate implementation of teaching rules and regulations.This article combines the construction practice of three-level clinical teaching base of the General Medicine College and the First Affiliated Hospital of Xi’an Medical University.We establish a standardized management system for the three-level clinical teaching base;implement a teaching supervision system and strengthen the monitoring of teaching quality;adopt multiple evaluations to test the effectiveness of clinical teaching implementation;explore the path of homogenization construction of teaching bases in terms of unified teacher training,promoting the development of teacher teaching abilities with equal quality and excellence,and providing a reference for improving the quality of medical talent training.展开更多
Homogeneous binary function products are frequently encountered in the sub-universes modeled by databases,spanning from genealogical trees and sports to education and healthcare,etc.Their properties must be discovered...Homogeneous binary function products are frequently encountered in the sub-universes modeled by databases,spanning from genealogical trees and sports to education and healthcare,etc.Their properties must be discovered and enforced by the software applications managing such data to guarantee plausibility.The(Elementary)Mathematical Data Model provides 17 types of dyadic-based homogeneous binary function product constraint categories.MatBase,an intelligent data and knowledge base management system prototype,allows database designers to simply declare them by only clicking corresponding checkboxes and automatically generates code for enforcing them.This paper describes the algorithms that MatBase uses for enforcing all 17 types of homogeneous binary function product constraint,which may also be employed by developers without access to MatBase.展开更多
In this paper,a Double-stage Surrogate-based Shape Optimization(DSSO)strategy for Blended-Wing-Body Underwater Gliders(BWBUGs)is proposed to reduce the computational cost.In this strategy,a double-stage surrogate mode...In this paper,a Double-stage Surrogate-based Shape Optimization(DSSO)strategy for Blended-Wing-Body Underwater Gliders(BWBUGs)is proposed to reduce the computational cost.In this strategy,a double-stage surrogate model is developed to replace the high-dimensional objective in shape optimization.Specifically,several First-stage Surrogate Models(FSMs)are built for the sectional airfoils,and the second-stage surrogate model is constructed with respect to the outputs of FSMs.Besides,a Multi-start Space Reduction surrogate-based global optimization method is applied to search for the optimum.In order to validate the efficiency of the proposed method,DSSO is first compared with an ordinary One-stage Surrogate-based Optimization strategy by using the same optimization method.Then,the other three popular surrogate-based optimization methods and three heuristic algorithms are utilized to make comparisons.Results indicate that the lift-to-drag ratio of the BWBUG is improved by 9.35%with DSSO,which outperforms the comparison methods.Besides,DSSO reduces more than 50%of the time that other methods used when obtaining the same level of results.Furthermore,some considerations of the proposed strategy are further discussed and some characteristics of DSSO are identified.展开更多
To improve the homogeneity and rolling formability of as-cast AZ91 magnesium,the effects of pre-homogenizing treatment on microstructure evolution,deformation mechanism,mechanical properties and tensile fracture morph...To improve the homogeneity and rolling formability of as-cast AZ91 magnesium,the effects of pre-homogenizing treatment on microstructure evolution,deformation mechanism,mechanical properties and tensile fracture morphology of hot-rolled AZ91 magnesium alloy were studied.The results showed that the amount of coarseβ-Mg17Al12 phase decreases dramatically,being distributed along the grain boundaries as small strips after homogenizing.Twining plays a dominant role in the deformation mechanism of AZ91 alloys in the experimental condition,while dynamic recrystallization(DRX)considerably occurred in homogenized-rolled alloys,contributed to microstructure uniformity andβ-Mg17Al12 phase precipitated refinement.The tensile strength of homogenized-rolled AZ91 alloys increases dramatically with elongation declining slightly in contrast to homogenized alloys.The fracture surface of homogenized-rolled specimen exhibits more ductile fracture with the manifestation of a large amount of dimples distributing higher density in matrix,while the micro cracks are prone to initiate around the Mg/Mg17Al12 phase interface and grain boundaries owing to the fragile interface bonding of two phases.展开更多
Forward extrusion experiments of as-cast AZ31 magnesium alloy were conducted at different temperatures and different extrusion ratios using the as-cast billets with and without homogenizing treatment.The mechanical pr...Forward extrusion experiments of as-cast AZ31 magnesium alloy were conducted at different temperatures and different extrusion ratios using the as-cast billets with and without homogenizing treatment.The mechanical properties of pre-and post-extrusion of the two kinds of billets were investigated.Experimental results show that the mechanical properties of post-extrusion of the two kinds of billets all are obviously improved compared with those of pre-extrusion.The elongation of post-extrusion using the billet with homogenizing is higher than that without homogenizing,but the tensile strength is lower than that without homogenizing.When the extrusion ratio increases,the elongation and tensile strength of post-extrusion of two kinds of billets all will increase obviously.When the extrusion temperature of billet without homogenizing increases,the tensile strength of post-extrusion will decrease obviously and the elongation of post-extrusion will change to a small extent.For the billet with homogenizing,the tensile strength of post-extrusion will decrease in some sort when extrusion temperature increases.展开更多
The microstructure of as-cast Ti-46AI-0.5W-0.5Si alloy exhibits significant microinhomogenetity due to the non-equilibrium solidification and low atom diffusion rate. In order to reduce the adverse effect of this micr...The microstructure of as-cast Ti-46AI-0.5W-0.5Si alloy exhibits significant microinhomogenetity due to the non-equilibrium solidification and low atom diffusion rate. In order to reduce the adverse effect of this microsegregation on plasticity, the microstructure evolution of the Ti-46AI-0.5W-0.5Si alloy homogenized at different temperatures from 1,200 ℃ to 1,320 ℃was investigated, and the optimized process of homogenizing treatment, i.e., annealing treated at 1,280 ℃ and held for 8 h, was determined. Microstructures of both the as-cast and heat treated alloys were observed by means of optical microscope and scanning electron microscopes. Tensile tests at room temperature were conducted on the homogenizing treated fully lamellar Ti-46AI-0.5W-0.5Si alloy with loading axis parallel to the lamellar interface. Results show that, at higher heat treatment temperatures, the W element diffuses sufficiently, the microstructure tends to be more homogeneous, and the profile of the silicide clusters becomes smooth. Heat treating conducted in the a＋y two phase region can keep the columnar grains and the original lamellar orientation within them. The microstructure of the alloy after heat treated in a＋y two phase region exhibits the coexisting morphology of coarse lamellar and thin lamellar. The homogenization process at 1,280℃ for 8 h can significantly reduce the microsegregation, and the elongation at room temperature can increase from 0.48% （as-cast） to 1.34%.展开更多
Objective To quantitatively evaluate the contamination area and risk of a live pathogen during tissue homogenization by either ultrasonic processor or tissue disperser.Methods A recombinant Herpes Simplex Virus（rHSV...Objective To quantitatively evaluate the contamination area and risk of a live pathogen during tissue homogenization by either ultrasonic processor or tissue disperser.Methods A recombinant Herpes Simplex Virus（rHSV） containing GFP gene was used as the index virus,and fresh liver tissue from healthy mice was used as simulated specimen.After 10% liver homogenate was mixed with rHSV（100 TCID50/0.1 mL） in a 5 mL tube,the stability of rHSV in liver homogenate and influences of an ultrasonic processor and a tissue disperser on viral infectivity were determined by GFP expressions in cell cultures.The contaminating areas of live viruses during homogenization were evaluated by a cell culture-based sedimentary.The contamination radii were counted by measurement of the distance between the operator and the farthest GFP positive well.Results The infectivity of rHSV in 10% liver homogenate maintained almost unchanged after it was incubated at room temperature for 30 min.Treatment with an ultrasonic processor clearly dropped down the virus infectivity,while a disperser not.Obvious spills and slashes of live viruses were observed in processes of homogenization with those two apparatuses.The contamination radii are positively related with sample volume,output energy of operator and handling time.Conclusion Homogenizing infectious samples with an ultrasonic processor and a tissue disperser at commonly used conditions caused obvious spills and splashes of live viruses,which possesses high risk to induce Laboratory acquired infections（LAIs）.展开更多
The present study investigates the mechanical and in-vitro corrosion behavior of Mg-4Zn-0.5Ca-0.8Mn alloy in optimum homogenized conditions.The optimization of the homogenization parameters has been carried out employ...The present study investigates the mechanical and in-vitro corrosion behavior of Mg-4Zn-0.5Ca-0.8Mn alloy in optimum homogenized conditions.The optimization of the homogenization parameters has been carried out employing thermodynamic calculations and kinetic modeling.The model utilizes the inter-diffusivity of the solute elements and predicts that∼6–24 h of homogenization at 633 K effectively redistributes the elements in the Mg matrix.Based on the insights obtained from the simulations,the as-cast Mg-4Zn-0.5Ca-0.8Mn alloy was subjected to homogenization heat treatment process for 6–24h.The microstructural study through optical microscopy and scanning electron microscopy(SEM)revealed that the interconnected network of second phase precipitates substantially dissolve within 24 h,implying adequate homogenization.Moreover,fine Mg-Zn based precipitates with varied morphology and phase fractions also evolved during homogenization treatment,as confirmed through SEM and transmission electron microscopy.In the 12 h homogenized specimen,the highest fraction of uniformly dispersed fine precipitates resulted in the highest strength(∼225 MPa).On the other hand,a substantial disruption in coarse precipitate network and lower aspect ratio of fine Mg-Zn precipitates led to the highest ductility(∼8%)in this specimen.In the 24 h homogenized specimen,the ductility reduced marginally owing to higher aspect ratio of fine precipitates.The immersion and electrochemical tests(viz.,potentiodynamic polarization and electrochemical impedance spectroscopy)carried out in Hank’s solution revealed that the 24 h homogenized specimen exhibits the best corrosion properties.The least fraction of Ca_(2)Mg_(6)Zn_(3)phase with maximum disruption in interconnectivity,in combination with a small fraction of fine equilibrium MgZn_(2)precipitates,resulted in suppression of localized corrosion in this specimen.This promotes the formation of the most stable and compact product layer over the specimen,resulting in the highest corrosion resistance.展开更多
Homogeneous, high concentrated ceramic suspensions wi th low viscosity are the key controlling factors for the production of ceramic c omponents through colloidal processing. A well-dispersed suspension can be obta in...Homogeneous, high concentrated ceramic suspensions wi th low viscosity are the key controlling factors for the production of ceramic c omponents through colloidal processing. A well-dispersed suspension can be obta ined by choosing suitable dispersant, solvent, particle size distribution etc. B esides these factors, the homogenizing procedure is also a key step. In this paper, reaction sialon suspensions were prepared using 3-wt% KD1 as dis persant in organic media composed of 60-vol% methyletheylketone and 40-vol% et hanol. Different homogenizing procedures have been used and compared, including planetary milling, low energy ball milling and ultrasonic disaggregation. The ef fects of different homogenizing routes and mixing times on the rheology and stab ility of suspensions, and on the microstructure of slip casting green bodies, ha ve been studied. The varying dispersion efficiencies observed could be attribute d to differences in deagglomeration degrees achieved and in adsorption amount of dispersant onto the surface of reaction sialon powders.展开更多
Natural minerals-based energy materials have attracted enormous attention because of the advantages of good materials consistency,high production,environmental friendliness,and low cost.The uniform distribution of gra...Natural minerals-based energy materials have attracted enormous attention because of the advantages of good materials consistency,high production,environmental friendliness,and low cost.The uniform distribution of grains can effectively inhibit the aggregation of active materials,improving lithium storage performance.In this work,natural graphite is modified by polyvinylpyrrolidone to obtain modified graphite with reduced size and better dispersion.Natural pyrite composite polyvinylpyrrolidone-modified graphite(pyrite/PG)material with uniform particle distribution is obtained by the ball milling process.The subsequent calcination process converts pyrite/PG into Fe_(1-x)Scompounded with polyvinylpyrrolidone-modified graphite(Fe_(1-x)S/PG).The homogeneous grain distributions of active material can facilitate the faster transfer of electrons and promote the efficient utilization of active materials.The as-prepared Fe_(1-x)S/PG electrode exhibits a remarkably reversible specific capacity of 613.0 mAh·g^(-1)at 0.2 A·g^(-1)after 80 cycles and an excellent rate capability of 523.0 mAh·g^(-1)at 5 A·g^(-1).Even at a higher current density of 10 A·g^(-1),it can deliver a specific capacity of 348.0 mAh·g^(-1).Moreover,the dominant pseudocapacitance in redox reactions accounts for the impressive rate and cycling stability.This work provides a low-cost and facile method to fabricate natural mineral-based anode materials and apprise readers about the impact of uniform particle distribution on lithium storage performance.展开更多
文摘In this article,we study Kahler metrics on a certain line bundle over some compact Kahler manifolds to find complete Kahler metrics with positive holomorphic sectional(or bisectional)curvatures.Thus,we apply a strategy to a famous Yau conjecture with a co-homogeneity one geometry.
基金supported by the National Natural Science Foundation of China(52272194)Liaoning Revitalization Talents Program(XLYC2007155)。
文摘Lithium metal batteries are regarded as prominent contenders to address the pressing needs owing to the high theoretical capacity.Toward the broader implementation,the primary obstacle lies in the intricate multi-electron,multi-step redox reaction associated with sluggish conversion kinetics,subsequently giving rise to a cascade of parasitic issues.In order to smooth reaction kinetics,catalysts are widely introduced to accelerate reaction rate via modulating the energy barrier.Over past decades,a large amount of research has been devoted to the catalyst design and catalytic mechanism exploration,and thus the great progress in electrochemical performance has been realized.Therefore,it is necessary to make a comprehensive review toward key progress in catalyst design and future development pathway.In this review,the basic mechanism of lithium metal batteries is provided along with corresponding advantages and existing challenges detailly described.The main catalysts employed to accelerate cathode reaction with emphasis on their catalytic mechanism are summarized as well.Finally,the rational design and innovative direction toward efficient catalysts are suggested for future application in metal-sulfur/gas battery and beyond.This review is expected to drive and benefit future research on rational catalyst design with multi-parameter synergistic impacts on the activity and stability of next-generation metal battery,thus opening new avenue for sustainable solution to climate change,energy and environmental issues,and the potential industrial economy.
文摘This paper investigates the homogeneity of United States aircraft reconnaissance data and the impact of these data on the homogeneity of the tropical cyclone(TC)best track data for the seasons 1949-1987 generated by the China Meteorological Administration(CMA).The evaluation of the reconnaissance data shows that the minimum central sea level pressure(MCP)data are relatively homogeneous,whereas the maximum sustained wind(MSW)data show both overestimations and spurious abrupt changes.Statistical comparisons suggest that both the reconnaissance MCP and MSW were well incorporated into the CMA TC best track dataset.Although no spurious abrupt changes were evident in the reconnaissance-related best track MCP data,two spurious changepoints were identified in the remainder of the best-track MCP data.Furthermore,the influence of the reconnaissance MSWs seems to extend to the best track MSWs unrelated to reconnaissance,which might reflect the optimistic confidence in making higher estimates due to the overestimated extreme wind“observations”.In addition,the overestimation of either the reconnaissance MSWs or the best track MSWs was greater during the early decades compared to later decades,which reflects the important influence of reconnaissance data on the CMA TC best track dataset.The wind-pressure relationship(WPR)used in the CMA TC best track dataset is also evaluated and is found to overestimate the MSW,which may lead to inhomogeneity within the dataset between the aircraft reconnaissance era and the satellite era.
基金financially supported by the National Natural Science Foundation of China(grant nos.51905391,52025052 and 51975405)。
文摘Laser-arc hybrid welding of AZ31B magnesium alloy was carried out,the effects of welding parameters on weld formation,microstructure homogeneity and mechanical properties were investigated.The results showed that laser-arc hybrid welding was beneficial to improve the weld formation of magnesium alloy by inhibiting the defect of undercut and pores.The weld microstructure was mainly columnar grains neighboring the fusion line and equiaxed grains at the weld center.It was interesting that the grain size at the upper arc zone was smaller than that at the lower laser zone,with the difference mainly affected by laser power rather than welding current and welding speed.The welding parameters were optimized as laser power of 3.5 kW,welding current of 100 A and welding speed of 1.5 m/min.In this case,the weld was free of undercut and pores,and the tensile strength and elongation rate reached 252 MPa and 11.2%,respectively.Finally,the microstructure homogeneity was illustrated according to the heat distribution,and the evolution law of tensile properties was discussed basing on the weld formation and microstructure characteristics.
基金Lisheng Liu acknowledges the support from the National Natural Science Foundation of China(No.11972267).
文摘This article proposes a modeling method for C/C-ZrC composite materials.According to the superposition of Gaussian random field,the original gray model is obtained,and the threshold segmentation method is used to generate the C-ZrC inclusion model.Finally,the fiber structure is added to construct the microstructure of the three-phase plain weave composite.The reconstructed inclusions can meet the randomness of the shape and have a uniform distribution.Using an algorithm based on asymptotic homogenization and finite element method,the equivalent thermal conductivity prediction of the microstructure finite element model was carried out,and the influence of component volume fraction on material thermal properties was explored.The sensitivity of model parameters was studied,including the size,mesh sensitivity,Gaussian complexity,and correlation length of the RVE model,and the optimal calculation model was selected.The results indicate that the volume fraction of the inclusion phase has a significant impact on the equivalent thermal conductivity of the material.As the volume fraction of carbon fiber and ZrC increases,the equivalent thermal conductivity tensor gradually decreases.This model can be used to explore the impact of materialmicrostructure on the results,and numerical simulations have studied the relationship between structure and performance,providing the possibility of designing microstructure based on performance.
基金supported by the National Natural Science Foundation of China (61604131,62025403)the Natural Science Foundation of Zhejiang Province (LY19F040009)+1 种基金the Fundamental Research Funds of Zhejiang SciTech University (23062120-Y)the Open Project of Key Laboratory of Solar Energy Utilization and Energy Saving Technology of Zhejiang Province (ZJS-OP-2020-07)
文摘Formamidine lead triiodide(FAPbI_(3))perovskites have become the most promising photovoltaic materials for perovskite solar cells with record power conversion efficiency(PCE).However,random nucleation,phase transition,and lattice defects are still the key challenges limiting the quality of FAPbI_(3) films.Previous studies show that the introduction or adding of seeds in the precursor is effective to promote the nucleation and crystallization of perovskite films.Nevertheless,the seed-assisted approach focuses on heterogeneous seeds or hetero-composites,which inevitably induce a lattice-mismatch,the genera-tion of strain or defects,and the phase segregation in the perovskite films.Herein,we first demonstrate that high-quality perovskite films are controllably prepared using α-and δ-phases mixed FAPbI_(3) micro-crystal as the homogeneous seeds with the one-step antisolvent method.The partially dissolved seeds with suitable sizes improve the crystallinity of the perovskite flm with preferable orientation,improved carrier lifetime,and increased carrier mobility.More importantly,the α-phase-containing seeds promote the formation of α-phase FAPbI_(3) films,leading to the reduction of residual lattice strain and the suppres-sion of I-ion migration.Besides,the adding of dimethyl 2,6-pyridine dicarboxylate(DPD)into the pre-cursor further suppresses the generation of defects,contributing to the PCE of devices prepared in air ambient being significantly improved to 23.75%,among the highest PCEs for fully air-processed FAPbI_(3) solar cells.The unpackaged target devices possess a high stability,maintaining 80%of the initial PCE under simulated solar illumination exceeding 800 h.
基金the National Natural Science Foundation of China(Grant Nos.41941017 and U1702241).
文摘Determining homogeneous domains statistically is helpful for engineering geological modeling and rock mass stability evaluation.In this text,a technique that can integrate lithology,geotechnical and structural information is proposed to delineate homogeneous domains.This technique is then applied to a high and steep slope along a road.First,geological and geotechnical domains were described based on lithology,faults,and shear zones.Next,topological manifolds were used to eliminate the incompatibility between orientations and other parameters(i.e.trace length and roughness)so that the data concerning various properties of each discontinuity can be matched and characterized in the same Euclidean space.Thus,the influence of implicit combined effect in between parameter sequences on the homogeneous domains could be considered.Deep learning technique was employed to quantify abstract features of the characterization images of discontinuity properties,and to assess the similarity of rock mass structures.The results show that the technique can effectively distinguish structural variations and outperform conventional methods.It can handle multisource engineering geological information and multiple discontinuity parameters.This technique can also minimize the interference of human factors and delineate homogeneous domains based on orientations or multi-parameter with arbitrary distributions to satisfy different engineering requirements.
基金supported by the National Natural Science Foundation of China(61971432)Taishan Scholar Project of Shandong Province(tsqn201909156)the Outstanding Youth Innovation Team Program of University in Shandong Province(2019KJN031)。
文摘Adaptive detection of range-spread targets is considered in the presence of subspace interference plus Gaussian clutter with unknown covariance matrix.The target signal and interference are supposed to lie in two linearly independent subspaces with deterministic but unknown coordinates.Relying on the two-step criteria,two adaptive detectors based on Gradient tests are proposed,in homogeneous and partially homogeneous clutter plus subspace interference,respectively.Both of the proposed detectors exhibit theoretically constant false alarm rate property against unknown clutter covariance matrix as well as the power level.Numerical results show that,the proposed detectors have better performance than their existing counterparts,especially for mismatches in the signal steering vectors.
文摘The article synthesizes and presents the results regarding the stability of positive homogeneous systems that have been researched and published in recent years. Next, we provide a sufficient condition for global exponential stability in the case of discrete-time positive homogeneous systems with an order less than one with time-varying delays.
基金Project supported by the National Natural Science Foundation of China(Nos.11932008 and 12272156)the Fundamental Research Funds for the Central Universities(No.lzujbky-2022-kb06)+1 种基金the Gansu Science and Technology ProgramLanzhou City’s Scientific Research Funding Subsidy to Lanzhou University of China。
文摘Second-generation high-temperature superconducting(HTS)conductors,specifically rare earth-barium-copper-oxide(REBCO)coated conductor(CC)tapes,are promising candidates for high-energy and high-field superconducting applications.With respect to epoxy-impregnated REBCO composite magnets that comprise multilayer components,the thermomechanical characteristics of each component differ considerably under extremely low temperatures and strong electromagnetic fields.Traditional numerical models include homogenized orthotropic models,which simplify overall field calculation but miss detailed multi-physics aspects,and full refinement(FR)ones that are thorough but computationally demanding.Herein,we propose an extended multi-scale approach for analyzing the multi-field characteristics of an epoxy-impregnated composite magnet assembled by HTS pancake coils.This approach combines a global homogenization(GH)scheme based on the homogenized electromagnetic T-A model,a method for solving Maxwell's equations for superconducting materials based on the current vector potential T and the magnetic field vector potential A,and a homogenized orthotropic thermoelastic model to assess the electromagnetic and thermoelastic properties at the macroscopic scale.We then identify“dangerous regions”at the macroscopic scale and obtain finer details using a local refinement(LR)scheme to capture the responses of each component material in the HTS composite tapes at the mesoscopic scale.The results of the present GH-LR multi-scale approach agree well with those of the FR scheme and the experimental data in the literature,indicating that the present approach is accurate and efficient.The proposed GH-LR multi-scale approach can serve as a valuable tool for evaluating the risk of failure in large-scale HTS composite magnets.
基金2022 Education and Teaching Reform Research Project of Xi’an Medical University“Construction and Practice of the Teaching Quality Assurance System in the Three-Level Teaching Base of General Practice Medicine Under the Internet+Model”(Project number:2022JG-05)。
文摘With the continuous expansion of medical student enrollment,the number of clinical teaching bases is gradually increasing.However,there are significant differences in clinical teaching management models and teaching levels among different bases.Most clinical teaching bases have incomplete teaching management systems,inadequate teaching management institutions,insufficient teaching personnel,and inadequate implementation of teaching rules and regulations.This article combines the construction practice of three-level clinical teaching base of the General Medicine College and the First Affiliated Hospital of Xi’an Medical University.We establish a standardized management system for the three-level clinical teaching base;implement a teaching supervision system and strengthen the monitoring of teaching quality;adopt multiple evaluations to test the effectiveness of clinical teaching implementation;explore the path of homogenization construction of teaching bases in terms of unified teacher training,promoting the development of teacher teaching abilities with equal quality and excellence,and providing a reference for improving the quality of medical talent training.
文摘Homogeneous binary function products are frequently encountered in the sub-universes modeled by databases,spanning from genealogical trees and sports to education and healthcare,etc.Their properties must be discovered and enforced by the software applications managing such data to guarantee plausibility.The(Elementary)Mathematical Data Model provides 17 types of dyadic-based homogeneous binary function product constraint categories.MatBase,an intelligent data and knowledge base management system prototype,allows database designers to simply declare them by only clicking corresponding checkboxes and automatically generates code for enforcing them.This paper describes the algorithms that MatBase uses for enforcing all 17 types of homogeneous binary function product constraint,which may also be employed by developers without access to MatBase.
基金This research was financially supported by the National Natural Science Foundation of China(Grant Nos.51875466 and 51805436)the China Postdoctoral Science Foundation(Grant No.2019T120941)the China Scholarships Council(Grant No.201806290133).
文摘In this paper,a Double-stage Surrogate-based Shape Optimization(DSSO)strategy for Blended-Wing-Body Underwater Gliders(BWBUGs)is proposed to reduce the computational cost.In this strategy,a double-stage surrogate model is developed to replace the high-dimensional objective in shape optimization.Specifically,several First-stage Surrogate Models(FSMs)are built for the sectional airfoils,and the second-stage surrogate model is constructed with respect to the outputs of FSMs.Besides,a Multi-start Space Reduction surrogate-based global optimization method is applied to search for the optimum.In order to validate the efficiency of the proposed method,DSSO is first compared with an ordinary One-stage Surrogate-based Optimization strategy by using the same optimization method.Then,the other three popular surrogate-based optimization methods and three heuristic algorithms are utilized to make comparisons.Results indicate that the lift-to-drag ratio of the BWBUG is improved by 9.35%with DSSO,which outperforms the comparison methods.Besides,DSSO reduces more than 50%of the time that other methods used when obtaining the same level of results.Furthermore,some considerations of the proposed strategy are further discussed and some characteristics of DSSO are identified.
基金the National Natural Science Foundation of China(Grant Nos.51175363 and 51474152)the Research Project Supported by the Shanxi Scholarship Council of China(Grant Nos.2014029)。
文摘To improve the homogeneity and rolling formability of as-cast AZ91 magnesium,the effects of pre-homogenizing treatment on microstructure evolution,deformation mechanism,mechanical properties and tensile fracture morphology of hot-rolled AZ91 magnesium alloy were studied.The results showed that the amount of coarseβ-Mg17Al12 phase decreases dramatically,being distributed along the grain boundaries as small strips after homogenizing.Twining plays a dominant role in the deformation mechanism of AZ91 alloys in the experimental condition,while dynamic recrystallization(DRX)considerably occurred in homogenized-rolled alloys,contributed to microstructure uniformity andβ-Mg17Al12 phase precipitated refinement.The tensile strength of homogenized-rolled AZ91 alloys increases dramatically with elongation declining slightly in contrast to homogenized alloys.The fracture surface of homogenized-rolled specimen exhibits more ductile fracture with the manifestation of a large amount of dimples distributing higher density in matrix,while the micro cracks are prone to initiate around the Mg/Mg17Al12 phase interface and grain boundaries owing to the fragile interface bonding of two phases.
基金Projects(50605059,50735005)supported by the National Natural Science Foundation of ChinaProject(2009081012)supported by International Cooperation of Shanxi Province,ChinaProject(20090319ZX)supported by Program for the Top Young Academic Leaders of Higher Learning Institutions of Shanxi Province,China
文摘Forward extrusion experiments of as-cast AZ31 magnesium alloy were conducted at different temperatures and different extrusion ratios using the as-cast billets with and without homogenizing treatment.The mechanical properties of pre-and post-extrusion of the two kinds of billets were investigated.Experimental results show that the mechanical properties of post-extrusion of the two kinds of billets all are obviously improved compared with those of pre-extrusion.The elongation of post-extrusion using the billet with homogenizing is higher than that without homogenizing,but the tensile strength is lower than that without homogenizing.When the extrusion ratio increases,the elongation and tensile strength of post-extrusion of two kinds of billets all will increase obviously.When the extrusion temperature of billet without homogenizing increases,the tensile strength of post-extrusion will decrease obviously and the elongation of post-extrusion will change to a small extent.For the billet with homogenizing,the tensile strength of post-extrusion will decrease in some sort when extrusion temperature increases.
基金supported by National Natural Science Foundation of China (Nos. 50975060, 50901025)the National Basic Research Program of China (2011CB610406)+2 种基金the China Postdoctoral Science Foundation (201104420, 20090450840)the Fundamental Research Funds for the Central Universities (HIT. BRET1. 2010008)Scientific and Technological Project in Heilongjiang Province (GZ09A206)
文摘The microstructure of as-cast Ti-46AI-0.5W-0.5Si alloy exhibits significant microinhomogenetity due to the non-equilibrium solidification and low atom diffusion rate. In order to reduce the adverse effect of this microsegregation on plasticity, the microstructure evolution of the Ti-46AI-0.5W-0.5Si alloy homogenized at different temperatures from 1,200 ℃ to 1,320 ℃was investigated, and the optimized process of homogenizing treatment, i.e., annealing treated at 1,280 ℃ and held for 8 h, was determined. Microstructures of both the as-cast and heat treated alloys were observed by means of optical microscope and scanning electron microscopes. Tensile tests at room temperature were conducted on the homogenizing treated fully lamellar Ti-46AI-0.5W-0.5Si alloy with loading axis parallel to the lamellar interface. Results show that, at higher heat treatment temperatures, the W element diffuses sufficiently, the microstructure tends to be more homogeneous, and the profile of the silicide clusters becomes smooth. Heat treating conducted in the a＋y two phase region can keep the columnar grains and the original lamellar orientation within them. The microstructure of the alloy after heat treated in a＋y two phase region exhibits the coexisting morphology of coarse lamellar and thin lamellar. The homogenization process at 1,280℃ for 8 h can significantly reduce the microsegregation, and the elongation at room temperature can increase from 0.48% （as-cast） to 1.34%.
基金supported by China Mega-Project for Infectious Disease (2009ZX10004-101,2009ZX10004-502)Health Sector Fund (200802021)SKLID Development Grant (2008SKLID102)
文摘Objective To quantitatively evaluate the contamination area and risk of a live pathogen during tissue homogenization by either ultrasonic processor or tissue disperser.Methods A recombinant Herpes Simplex Virus（rHSV） containing GFP gene was used as the index virus,and fresh liver tissue from healthy mice was used as simulated specimen.After 10% liver homogenate was mixed with rHSV（100 TCID50/0.1 mL） in a 5 mL tube,the stability of rHSV in liver homogenate and influences of an ultrasonic processor and a tissue disperser on viral infectivity were determined by GFP expressions in cell cultures.The contaminating areas of live viruses during homogenization were evaluated by a cell culture-based sedimentary.The contamination radii were counted by measurement of the distance between the operator and the farthest GFP positive well.Results The infectivity of rHSV in 10% liver homogenate maintained almost unchanged after it was incubated at room temperature for 30 min.Treatment with an ultrasonic processor clearly dropped down the virus infectivity,while a disperser not.Obvious spills and slashes of live viruses were observed in processes of homogenization with those two apparatuses.The contamination radii are positively related with sample volume,output energy of operator and handling time.Conclusion Homogenizing infectious samples with an ultrasonic processor and a tissue disperser at commonly used conditions caused obvious spills and splashes of live viruses,which possesses high risk to induce Laboratory acquired infections（LAIs）.
文摘The present study investigates the mechanical and in-vitro corrosion behavior of Mg-4Zn-0.5Ca-0.8Mn alloy in optimum homogenized conditions.The optimization of the homogenization parameters has been carried out employing thermodynamic calculations and kinetic modeling.The model utilizes the inter-diffusivity of the solute elements and predicts that∼6–24 h of homogenization at 633 K effectively redistributes the elements in the Mg matrix.Based on the insights obtained from the simulations,the as-cast Mg-4Zn-0.5Ca-0.8Mn alloy was subjected to homogenization heat treatment process for 6–24h.The microstructural study through optical microscopy and scanning electron microscopy(SEM)revealed that the interconnected network of second phase precipitates substantially dissolve within 24 h,implying adequate homogenization.Moreover,fine Mg-Zn based precipitates with varied morphology and phase fractions also evolved during homogenization treatment,as confirmed through SEM and transmission electron microscopy.In the 12 h homogenized specimen,the highest fraction of uniformly dispersed fine precipitates resulted in the highest strength(∼225 MPa).On the other hand,a substantial disruption in coarse precipitate network and lower aspect ratio of fine Mg-Zn precipitates led to the highest ductility(∼8%)in this specimen.In the 24 h homogenized specimen,the ductility reduced marginally owing to higher aspect ratio of fine precipitates.The immersion and electrochemical tests(viz.,potentiodynamic polarization and electrochemical impedance spectroscopy)carried out in Hank’s solution revealed that the 24 h homogenized specimen exhibits the best corrosion properties.The least fraction of Ca_(2)Mg_(6)Zn_(3)phase with maximum disruption in interconnectivity,in combination with a small fraction of fine equilibrium MgZn_(2)precipitates,resulted in suppression of localized corrosion in this specimen.This promotes the formation of the most stable and compact product layer over the specimen,resulting in the highest corrosion resistance.
文摘Homogeneous, high concentrated ceramic suspensions wi th low viscosity are the key controlling factors for the production of ceramic c omponents through colloidal processing. A well-dispersed suspension can be obta ined by choosing suitable dispersant, solvent, particle size distribution etc. B esides these factors, the homogenizing procedure is also a key step. In this paper, reaction sialon suspensions were prepared using 3-wt% KD1 as dis persant in organic media composed of 60-vol% methyletheylketone and 40-vol% et hanol. Different homogenizing procedures have been used and compared, including planetary milling, low energy ball milling and ultrasonic disaggregation. The ef fects of different homogenizing routes and mixing times on the rheology and stab ility of suspensions, and on the microstructure of slip casting green bodies, ha ve been studied. The varying dispersion efficiencies observed could be attribute d to differences in deagglomeration degrees achieved and in adsorption amount of dispersant onto the surface of reaction sialon powders.
基金financially supported by the National Natural Science Foundation of China (Nos.51974222 and 52034011)。
文摘Natural minerals-based energy materials have attracted enormous attention because of the advantages of good materials consistency,high production,environmental friendliness,and low cost.The uniform distribution of grains can effectively inhibit the aggregation of active materials,improving lithium storage performance.In this work,natural graphite is modified by polyvinylpyrrolidone to obtain modified graphite with reduced size and better dispersion.Natural pyrite composite polyvinylpyrrolidone-modified graphite(pyrite/PG)material with uniform particle distribution is obtained by the ball milling process.The subsequent calcination process converts pyrite/PG into Fe_(1-x)Scompounded with polyvinylpyrrolidone-modified graphite(Fe_(1-x)S/PG).The homogeneous grain distributions of active material can facilitate the faster transfer of electrons and promote the efficient utilization of active materials.The as-prepared Fe_(1-x)S/PG electrode exhibits a remarkably reversible specific capacity of 613.0 mAh·g^(-1)at 0.2 A·g^(-1)after 80 cycles and an excellent rate capability of 523.0 mAh·g^(-1)at 5 A·g^(-1).Even at a higher current density of 10 A·g^(-1),it can deliver a specific capacity of 348.0 mAh·g^(-1).Moreover,the dominant pseudocapacitance in redox reactions accounts for the impressive rate and cycling stability.This work provides a low-cost and facile method to fabricate natural mineral-based anode materials and apprise readers about the impact of uniform particle distribution on lithium storage performance.
