The approach combining the dynamic caustics method with high-speed photography technology is used to study the interaction between propagating cracks and three kinds of deformity inclusions（ cylinder inclusion, quadr...The approach combining the dynamic caustics method with high-speed photography technology is used to study the interaction between propagating cracks and three kinds of deformity inclusions（ cylinder inclusion, quadruple inclusion and triangular inclusion） under lowvelocity impact loading. By recording the caustic spots of crack tips at different moments during the crack propagation, the variation regulations of dynamic stress intensity factors（ DSIF） and crack growth velocity with respect to time are obtained. The experimental results showthat the resistance effects to crack growth are varied with different shapes of inclusions in specimens, and the quadruple inclusion＇s effect is more apparent. The distortion degree of caustic spots is affected by the shapes of inclusions as well, and the situation is more serious for cylinder and quadruple inclusions. The overall values of DSIFs of triangular inclusion specimen are greater than the others, and the crack growth velocities, characteristic sizes and DSIFs showprocesses of fluctuations because of the disturbance of reflection waves in specimens. The results provide an experimental basis for the analysis of strength and impact-resistance ability in structures with deformity inclusions.展开更多
Using digital laser dynamic caustics experimental system and conducting simulation experiment researched the influence rule of blasting excavation of a new roadway on neighboring existed different cross-section roadwa...Using digital laser dynamic caustics experimental system and conducting simulation experiment researched the influence rule of blasting excavation of a new roadway on neighboring existed different cross-section roadways. The experimental results show that the influence of blast load on adjacent roadway has a good relationship with the cross-section of roadway. The expansion distance of precrack existed in circular, arch-wall, rectangular roadway is respectively 1.76, 1.61 and 0 cm under blast load.At the same time, the direct-blast side of rectangular roadway has more obvious damage compared with circular and arch-wall roadway. It explains that plane reflects more stress wave than arc, so that it exerts more tensile failure in the direct-blast side, which leads to less stress wave diffracting to the precrack in the back-blast side. When the precrack extends, higher value dynamic stress intensity factor in circular roadway works longer than that of arch-wall roadway. Indirectly, it explains that plane's weakening function on stress wave is significantly stronger than arc. Stress wave brings about self-evident influence on the upper and bottom endpoints of the rectangular roadway, and it respectively extends 1.03, 2.06 cm along the line link direction of the center of the blasthole and the upper and bottom endpoints on the right wall.展开更多
Based on the first invariant of stress singular field in the vicinity of running tip of an interface crack, mapping equations of the caustic curve on the reference plane and the initial curve on the specimen plane are...Based on the first invariant of stress singular field in the vicinity of running tip of an interface crack, mapping equations of the caustic curve on the reference plane and the initial curve on the specimen plane are developed. The dynamic caustics are analyzed for the crack propagating along the interface between two bonded dissimilar materials. The variation of the caustic configurations is shown with the velocity change of the running crack and the ratio change of the stress intensity factors. Two characteristic dimensions are proposed that are not only practically measurable from optical caustic contours but also suitable to represent the behavior of transient caustics.展开更多
The dynamic fracture behavior of the three-point bending beam with double deformity inclusions under impact loading is studied by using digital high-speed photography in combination with the transmission-type dynamic ...The dynamic fracture behavior of the three-point bending beam with double deformity inclusions under impact loading is studied by using digital high-speed photography in combination with the transmission-type dynamic caustic method. The experimental results indicate that the fluctuation of crack propagation velocity v first increases and then decreases in the crack propagation process. During the process of crack propagating into the inclusion area, the fracture resistance effect of the circular inclusion is the most significant and the effects of triangular and square inclusions are less obvious. The stress intensity factor near the crack tip increases during the propagation process and reaches its maximum value when the crack tip is close to the inclusions. The crack tip’s dynamic stress intensity factor （ DSIF） decreases when the crack exceeds the middle area of the double inclusions. These results provide an experimental basis and scientific foundation to strengthen the evaluation and fracture analysis of the structure containing deformity inclusions.展开更多
A new and effective method used to separate the transient principal stresses for dynamic photoelasticity is proposed. This is a hybrid method combining the optical method of dynamic caustics and the boundary element n...A new and effective method used to separate the transient principal stresses for dynamic photoelasticity is proposed. This is a hybrid method combining the optical method of dynamic caustics and the boundary element numerical method. Firstly, a modified Cranz-Schardin spark camera is used to record simultaneously the isochromatic fringe patterns of photoelasticity and the shadow spot patterns in the dynamic process. By means of the isochromatic fringe patterns, the difference between transient principal stresses in the whole domain and the principal stresses along the free boundary can be solved. In addition, the method of caustics is a very powerful technique for measuring the concentrative load. Then, the sum of the principal stresses is calculated by the boundary integral equation obtained from the Laplace integral transform of the wave equation. So, the transient principal stresses can be determined from the experimental and numerical results. As an example, the transient principal stresses in a polycarbonate disk under an impact load are resolved.展开更多
In this paper,dynamic caustic method is applied to analyze the blast-induced crack propagation and distribution of the dynamic stress field around an empty circular hole in polymethyl methacrylate(PMMA)material under ...In this paper,dynamic caustic method is applied to analyze the blast-induced crack propagation and distribution of the dynamic stress field around an empty circular hole in polymethyl methacrylate(PMMA)material under delayed ignition blasting loads.The following experimental results are obtained.(1)In directional-fracture-controlled blasting,the dynamic stress intensity factors(DSIFs)and the propagation paths of the blast-induced cracks are obviously influenced by the delayed ignition.(2) The circular hole situated between the two boreholes poses a strong guiding effect on the coelesence of the cracks,causing them to propagate towards each other when cracks are reaching the circular hole area.(3)Blast-induced cracks are not initiated preferentially because of the superimposed effect from the explosive stress waves on the cracking area.(4) By using the scanning electron microscopy(SEM)method,it is verified that the roughness of crack surfaces changes along the crack propagation paths.展开更多
Dynamic fracture behaviour of crack curving in bent beams has been investigated. In order to understand the propagation mechanism of such cracks under impact, an experimental method is used that combines dynamic photo...Dynamic fracture behaviour of crack curving in bent beams has been investigated. In order to understand the propagation mechanism of such cracks under impact, an experimental method is used that combines dynamic photoelasticity with dynamic caustics to study the interaction of the flexural waves and the crack. From the state change of the transient stresses in polymer specimen, the curving fracture in the impulsively loaded beams is analyzed. The dynamic responses of crack tips are evaluated by the stress intensity factors for the cracks running in varying curvature paths under bending stress wave.展开更多
An underground roadway usually contains defects of various types,and when the roadway is subjected to external loading,the locations of those defects influence the roadway by differing degrees.In this study,to study h...An underground roadway usually contains defects of various types,and when the roadway is subjected to external loading,the locations of those defects influence the roadway by differing degrees.In this study,to study how the locations of defects affect crack propagation in a roadway,specimens with tunnel-type voids were made using polymethyl methacrylate,and the stress wave produced by a bullet impacting an incident rod was used as the impact load.Meanwhile,the variations in crack speed,displacement,and dynamic stress intensity factor during crack propagation were obtained using an experimental system of digital laser dynamic caustics,and the commercial software ABAQUS was used for numerical simulations.From the experiments and numerical simulations,the crack propagation path was verified and the impact fracture behavior of a semicircular-arch roadway with different defect positions was presented.The results show that when the pre-fabricated crack is on the central axis of the sample,the crack propagation is purely mode I;when the pre-fabricated crack is 5 mm from the central axis,the crack propagation alternates between mode I and a mixture of modes I and II;when the pre-fabricated crack is at the edge of the semicircular-arch roadway,the crack propagation follows the I-II mixed mode.展开更多
DDGS high speed camera is an improved version of the multispark system. In this system the time delay and the frame interval can be set arbitrarily from 5 mu s to 10000 mu s, and the intervals may be equal or not. The...DDGS high speed camera is an improved version of the multispark system. In this system the time delay and the frame interval can be set arbitrarily from 5 mu s to 10000 mu s, and the intervals may be equal or not. The modified spark gaps can provide point flashes that are small enough in size and strong enough in light for both dynamic caustics and dynamic photo-elasticity. In addition, this system can be changed easily to observe the Bow by schlieren method, Thus, this optical system is suitable to investigate many dynamic problems in the fields of solid and fluid mechanics.展开更多
This paper theoretically analyzed and discussed the fractures’ initiation, propagation and arrest of grooved borehole blasting under the function of explosion, and provided the optimistic values of blasting parameter...This paper theoretically analyzed and discussed the fractures’ initiation, propagation and arrest of grooved borehole blasting under the function of explosion, and provided the optimistic values of blasting parameters. The stress intensity factor and velocity of crack propagation were measured through dynamic caustics measuring system.展开更多
基金The National Natural Science Foundation of China(No.51374210,51134025)the 111 Project(No.B14006)
文摘The approach combining the dynamic caustics method with high-speed photography technology is used to study the interaction between propagating cracks and three kinds of deformity inclusions（ cylinder inclusion, quadruple inclusion and triangular inclusion） under lowvelocity impact loading. By recording the caustic spots of crack tips at different moments during the crack propagation, the variation regulations of dynamic stress intensity factors（ DSIF） and crack growth velocity with respect to time are obtained. The experimental results showthat the resistance effects to crack growth are varied with different shapes of inclusions in specimens, and the quadruple inclusion＇s effect is more apparent. The distortion degree of caustic spots is affected by the shapes of inclusions as well, and the situation is more serious for cylinder and quadruple inclusions. The overall values of DSIFs of triangular inclusion specimen are greater than the others, and the crack growth velocities, characteristic sizes and DSIFs showprocesses of fluctuations because of the disturbance of reflection waves in specimens. The results provide an experimental basis for the analysis of strength and impact-resistance ability in structures with deformity inclusions.
基金provided by the National Natural Science Foundation of China (Nos. 51274204 and 51134025)National Key Basic Research Program (No. 2010CB732002)The Ministry of Education Program for New Century Excellent Talents to Support Project of China (No. NCET-12-0965)
文摘Using digital laser dynamic caustics experimental system and conducting simulation experiment researched the influence rule of blasting excavation of a new roadway on neighboring existed different cross-section roadways. The experimental results show that the influence of blast load on adjacent roadway has a good relationship with the cross-section of roadway. The expansion distance of precrack existed in circular, arch-wall, rectangular roadway is respectively 1.76, 1.61 and 0 cm under blast load.At the same time, the direct-blast side of rectangular roadway has more obvious damage compared with circular and arch-wall roadway. It explains that plane reflects more stress wave than arc, so that it exerts more tensile failure in the direct-blast side, which leads to less stress wave diffracting to the precrack in the back-blast side. When the precrack extends, higher value dynamic stress intensity factor in circular roadway works longer than that of arch-wall roadway. Indirectly, it explains that plane's weakening function on stress wave is significantly stronger than arc. Stress wave brings about self-evident influence on the upper and bottom endpoints of the rectangular roadway, and it respectively extends 1.03, 2.06 cm along the line link direction of the center of the blasthole and the upper and bottom endpoints on the right wall.
基金The project supported by the National Natural Science Foundation of Chinathe Scientific Commission of Yunnan Province of China
文摘Based on the first invariant of stress singular field in the vicinity of running tip of an interface crack, mapping equations of the caustic curve on the reference plane and the initial curve on the specimen plane are developed. The dynamic caustics are analyzed for the crack propagating along the interface between two bonded dissimilar materials. The variation of the caustic configurations is shown with the velocity change of the running crack and the ratio change of the stress intensity factors. Two characteristic dimensions are proposed that are not only practically measurable from optical caustic contours but also suitable to represent the behavior of transient caustics.
基金The National Basic Research Program of China(973 Program)(No.2011CB606105)the National Natural Science Foundation of China(No.51374210,51134025)
文摘The dynamic fracture behavior of the three-point bending beam with double deformity inclusions under impact loading is studied by using digital high-speed photography in combination with the transmission-type dynamic caustic method. The experimental results indicate that the fluctuation of crack propagation velocity v first increases and then decreases in the crack propagation process. During the process of crack propagating into the inclusion area, the fracture resistance effect of the circular inclusion is the most significant and the effects of triangular and square inclusions are less obvious. The stress intensity factor near the crack tip increases during the propagation process and reaches its maximum value when the crack tip is close to the inclusions. The crack tip’s dynamic stress intensity factor （ DSIF） decreases when the crack exceeds the middle area of the double inclusions. These results provide an experimental basis and scientific foundation to strengthen the evaluation and fracture analysis of the structure containing deformity inclusions.
基金Concurrently published in the Chinese Edition of Acta Mechanica Sinica, Vol, 26, No.1, 1994
文摘A new and effective method used to separate the transient principal stresses for dynamic photoelasticity is proposed. This is a hybrid method combining the optical method of dynamic caustics and the boundary element numerical method. Firstly, a modified Cranz-Schardin spark camera is used to record simultaneously the isochromatic fringe patterns of photoelasticity and the shadow spot patterns in the dynamic process. By means of the isochromatic fringe patterns, the difference between transient principal stresses in the whole domain and the principal stresses along the free boundary can be solved. In addition, the method of caustics is a very powerful technique for measuring the concentrative load. Then, the sum of the principal stresses is calculated by the boundary integral equation obtained from the Laplace integral transform of the wave equation. So, the transient principal stresses can be determined from the experimental and numerical results. As an example, the transient principal stresses in a polycarbonate disk under an impact load are resolved.
基金Supported by the Opening Fund of the State Key Laboratory of Explosion Science and Technology of Beijing Institute of Technology(KFJJ17-01M)
文摘In this paper,dynamic caustic method is applied to analyze the blast-induced crack propagation and distribution of the dynamic stress field around an empty circular hole in polymethyl methacrylate(PMMA)material under delayed ignition blasting loads.The following experimental results are obtained.(1)In directional-fracture-controlled blasting,the dynamic stress intensity factors(DSIFs)and the propagation paths of the blast-induced cracks are obviously influenced by the delayed ignition.(2) The circular hole situated between the two boreholes poses a strong guiding effect on the coelesence of the cracks,causing them to propagate towards each other when cracks are reaching the circular hole area.(3)Blast-induced cracks are not initiated preferentially because of the superimposed effect from the explosive stress waves on the cracking area.(4) By using the scanning electron microscopy(SEM)method,it is verified that the roughness of crack surfaces changes along the crack propagation paths.
基金The project supported by the National Natural Science Foundation of Chinathe Scientific Commussion of Yunnan Province of China
文摘Dynamic fracture behaviour of crack curving in bent beams has been investigated. In order to understand the propagation mechanism of such cracks under impact, an experimental method is used that combines dynamic photoelasticity with dynamic caustics to study the interaction of the flexural waves and the crack. From the state change of the transient stresses in polymer specimen, the curving fracture in the impulsively loaded beams is analyzed. The dynamic responses of crack tips are evaluated by the stress intensity factors for the cracks running in varying curvature paths under bending stress wave.
基金This work was financed by the State Key Development Program for Basic Research of China(2016YFC0600903)the National Natural Science Foundation of China(51774287).
文摘An underground roadway usually contains defects of various types,and when the roadway is subjected to external loading,the locations of those defects influence the roadway by differing degrees.In this study,to study how the locations of defects affect crack propagation in a roadway,specimens with tunnel-type voids were made using polymethyl methacrylate,and the stress wave produced by a bullet impacting an incident rod was used as the impact load.Meanwhile,the variations in crack speed,displacement,and dynamic stress intensity factor during crack propagation were obtained using an experimental system of digital laser dynamic caustics,and the commercial software ABAQUS was used for numerical simulations.From the experiments and numerical simulations,the crack propagation path was verified and the impact fracture behavior of a semicircular-arch roadway with different defect positions was presented.The results show that when the pre-fabricated crack is on the central axis of the sample,the crack propagation is purely mode I;when the pre-fabricated crack is 5 mm from the central axis,the crack propagation alternates between mode I and a mixture of modes I and II;when the pre-fabricated crack is at the edge of the semicircular-arch roadway,the crack propagation follows the I-II mixed mode.
文摘DDGS high speed camera is an improved version of the multispark system. In this system the time delay and the frame interval can be set arbitrarily from 5 mu s to 10000 mu s, and the intervals may be equal or not. The modified spark gaps can provide point flashes that are small enough in size and strong enough in light for both dynamic caustics and dynamic photo-elasticity. In addition, this system can be changed easily to observe the Bow by schlieren method, Thus, this optical system is suitable to investigate many dynamic problems in the fields of solid and fluid mechanics.
文摘This paper theoretically analyzed and discussed the fractures’ initiation, propagation and arrest of grooved borehole blasting under the function of explosion, and provided the optimistic values of blasting parameters. The stress intensity factor and velocity of crack propagation were measured through dynamic caustics measuring system.
