This paper expresses the efficient outputs of decisionmaking unit(DMU) as the sum of "average outputs" forecasted by a GM(1,N) model and "increased outputs" which reflect the difficulty to realize efficient ou...This paper expresses the efficient outputs of decisionmaking unit(DMU) as the sum of "average outputs" forecasted by a GM(1,N) model and "increased outputs" which reflect the difficulty to realize efficient outputs.The increased outputs are solved by linear programming using data envelopment analysis efficiency theories,wherein a new sample is introduced whose inputs are equal to the budget in the issue No.n + 1 and outputs are forecasted by the GM(1,N) model.The shortcoming in the existing methods that the forecasted efficient outputs may be less than the possible actual outputs according to developing trends of input-output rate in the periods of pre-n is overcome.The new prediction method provides decision-makers with more decisionmaking information,and the initial conditions are easy to be given.展开更多
In former researches there are primary theoretical studies and qualitative analyses on enterprise leaders' effectiveness and performance, and there are a few studies on quantitative analyses which mostly relies on th...In former researches there are primary theoretical studies and qualitative analyses on enterprise leaders' effectiveness and performance, and there are a few studies on quantitative analyses which mostly relies on the method of comparing differences and ratio of divergence to evaluate leaders' performance by stage statistics. This paper illustrates how to evaluate Comprehensive Efficiency (CE) based on Scientific Development Outlook, which reflects overall development of enterprise leaders' performance, depends on measuring Output Efficiency Index (OEI) and Cost Efficiency Index (CEI) of enterprise leaders' performance, and adopts the C^2R model in Data Envelopment Analysis (DEA).展开更多
Rice yields and nitrogen use efficiencies were studied at five sites in southwest China using two nitrogen fertilization rates and five controlled-release urea( CRU) to ordinary urea( U) ratios. The fertilizer tre...Rice yields and nitrogen use efficiencies were studied at five sites in southwest China using two nitrogen fertilization rates and five controlled-release urea( CRU) to ordinary urea( U) ratios. The fertilizer treatments significantly increased rice yields compared with the control( no nitrogen added) yields to different degrees at different sites. Applying CRU and U increased the rice yield more than adding the same amount of nitrogen as U only. Higher increasing production rate were found using a nitrogen application rate of 105 kg/hm2 than 150 kg/hm2. A 70∶ 30 CRU∶ U ratio increased the yield more than other four ratios. Nitrogen use efficiency was 21. 9% higher using a nitrogen application rate of 105 kg/hm^2 than 150 kg/hm^2,and 46. 6%,38. 1%,34. 7%,and 22. 2% higher than when only U was applied when CRU∶ U ratios of 70 ∶ 30,50 ∶ 50,100 ∶ 0,and 30 ∶ 70,respectively,were used. A 70 ∶ 30 CRU ∶ U ratio gave the highest economic output( yuan/hm^2). Applying both CRU and U gave an output 3 078. 87 yuan/hm^2 higher at a nitrogen application rate of 150 kg/hm^2 than at a nitrogen application rate of 105 kg/hm^2. Economic output was always higher using both CRU and U than using U only. The highest economic output was given using a 70∶ 30 CRU∶ U ratio.Increasing the amount of nitrogen added decreased the output efficiency( per hm2) because CRU is expensive. Significant relationships were found between the yield increase rate and the proportion of CRU added( regression equation y = 7. 429 x-185. 7,R^2= 0. 663) and between the total rainfall over the whole growth period and the proportion of CRU added( y =-0. 087 1 x + 112. 29,R^2= 0. 687 9). These regression equations can be used to determine the appropriate proportion of CRU that should be added at a site,depending on the rainfall and target rice yield.展开更多
A numerical model of thermoelectric module (TEM) is created by academic analysis,and the impacts of the resistance ratio and thermoelement size on the output power and thermoelectric efficiency of the TEM are analyz...A numerical model of thermoelectric module (TEM) is created by academic analysis,and the impacts of the resistance ratio and thermoelement size on the output power and thermoelectric efficiency of the TEM are analyzed by the MATLAB numerical calculation.The numerical model is validated by the ANSYS thermal,electrical,and structural coupling simulation.The effects of the variable physical property parameters and contact effect on the output power and thermoelectric efficiency are evaluated,and the concept of aspect ratio optimal domain is proposed,which provides a new design approach for the TEM.展开更多
Prticle-in-cell(PIC) simulations demonstrated that,when the relativistic magnetron with diffraction output(MDO) is applied with a 410 kV voltage pulse,or when the relativistic magnetron with radial output is appli...Prticle-in-cell(PIC) simulations demonstrated that,when the relativistic magnetron with diffraction output(MDO) is applied with a 410 kV voltage pulse,or when the relativistic magnetron with radial output is applied with a 350 kV voltage pulse,electrons emitted from the cathode with high energy will strike the anode block wall.The emitted secondary electrons and backscattered electrons affect the interaction between electrons and RF fields induced by the operating modes,which decreases the output power in the radial output relativistic magnetron by about 15%(10%for the axial output relativistic magnetron),decreases the anode current by about 5%(5%for the axial output relativistic magnetron),and leads to a decrease of electronic efficiency by 8%(6%for the axial output relativistic magnetron).The peak value of the current formed by secondary and backscattered current equals nearly half of the amplitude of the anode current,which may help the growth of parasitic modes when the applied magnetic field is near the critical magnetic field separating neighboring modes.Thus,mode competition becomes more serious.展开更多
Thermally stable region of a seven-rod resonator is theoretically investigated. A plane-plane symmetric resonator, where the distance between two neighbor rods is two times of that between the rods and the mirrors, is...Thermally stable region of a seven-rod resonator is theoretically investigated. A plane-plane symmetric resonator, where the distance between two neighbor rods is two times of that between the rods and the mirrors, is adopted because of its large stable range. Based on the investigation, a seven-rod resonator with an average output power of 3.79 kW and an optical-to-optical efficiency of 53% is developed.展开更多
In this study,a novel irreversible cyclic model of a capacitive mixing blue heat engine mainly consisting of super capacitors,charging and discharging circuits,a heat source,as well as two water sources with given sal...In this study,a novel irreversible cyclic model of a capacitive mixing blue heat engine mainly consisting of super capacitors,charging and discharging circuits,a heat source,as well as two water sources with given salt concentrations is established for harvesting salinity gradient energy and waste heat.Additionally,the effects of the charging voltage and ratio of the minimum to maximum surface electric charge density on the thermodynamic efficiency and power output of the cycle are discussed.The maximum power output of the cycle is calculated.The optimized ranges of efficiency and power output as well as the temperatures of two isothermal processes are determined.It is established that during the isoelectric quantity process,there is not only an increase in thermal voltage owing to the temperature difference,but also an increase in concentration voltage owing to the salinity gradient.Consequently,the blue heat engine can obtain higher energy conversion efficiency than a conventional heat engine.When the temperature ratio of the heat source to the heat sink is 1.233,the maximum efficiency can reach approximately36%.The results obtained can promote the application of capacitive mixing technology in real life,reducing the consumption of fossil fuels.展开更多
This study reports a new model of an air standard Dual-Miller cycle(DMC) with two polytropic processes and heat transfer loss.The two reversible adiabatic processes which could not be realized in practice are replaced...This study reports a new model of an air standard Dual-Miller cycle(DMC) with two polytropic processes and heat transfer loss.The two reversible adiabatic processes which could not be realized in practice are replaced with two polytropic processes in order to more accurately reflect the practical working performance. The heat transfer loss is taken into account. The expressions of power output, thermal efficiency, entropy generation rate(EGR) and ecological function are addressed using finite-time thermodynamic theory. Through numerical calculations, the influences of compression ratio, cut-off ratio and polytropic exponent on the performance are thermodynamically analyzed. The model can be simplified to other cycle models under specific conditions, which means the results have an certain universality and may be helpful in the design of practical heat engines. It is shown that the entropy generation minimization does not always lead to the best system performance.展开更多
With the acceleration of urbanization,cities are the main targets for carbon neutrality and urban energy is the terminal of energy consumption and the integration point of various energy systems.Therefore,there is a n...With the acceleration of urbanization,cities are the main targets for carbon neutrality and urban energy is the terminal of energy consumption and the integration point of various energy systems.Therefore,there is a need to promote the development of urban green energy and achieve low input and high output to achieve a low-carbon economy in cities.Previous studies have not considered the input-output efficiency of urban green-energy development.This study fills this gap.Based on the economic-energy-environmental framework,an input-output efficiency-evaluation index system for urban green-energy development was constructed.Based on improved data-envelopment analysis,a comparative evaluation of the input-output efficiency of green-energy development was carried out in 30 provinces in China in 2019.Considering the differences in regions,the development of urban green energy in different provinces was classified.From the perspective of a low-carbon economy,economic growth factors and environmental constraint factors were set.Together with the generalized Divisia index approach,the input-output efficiency optimization directions of urban green-energy development were obtained.The results showed that the input-output efficiencies of urban green-energy development in Jiangsu,Zhejiang,Fujian,Inner Mongolia,Ningxia and other provinces and cities were relatively high.Provinces with faster economic development and higher environmental carrying capacity have advantages after optimization and will become pilot areas for the development of urban green energy.This research provides a reference for the development of urban green energy in various provinces from the input and output perspective.展开更多
A frequency domain analysis is presented to determine the performance characteristics of a tunable all-optical wavelength converter using four-wave mixing (FWM) in a single mode fiber (SMF) around the zero dispersion ...A frequency domain analysis is presented to determine the performance characteristics of a tunable all-optical wavelength converter using four-wave mixing (FWM) in a single mode fiber (SMF) around the zero dispersion wavelength using two pump lasers. The output converted signal power as well as efficiency evaluated at a bit rate of 10 Gb/s show that the signal power is substantially higher at lower values of wavelength separation.展开更多
基金supported by the Research Start Funds for Introducing High-level Talents of North China University of Water Resources and Electric Power
文摘This paper expresses the efficient outputs of decisionmaking unit(DMU) as the sum of "average outputs" forecasted by a GM(1,N) model and "increased outputs" which reflect the difficulty to realize efficient outputs.The increased outputs are solved by linear programming using data envelopment analysis efficiency theories,wherein a new sample is introduced whose inputs are equal to the budget in the issue No.n + 1 and outputs are forecasted by the GM(1,N) model.The shortcoming in the existing methods that the forecasted efficient outputs may be less than the possible actual outputs according to developing trends of input-output rate in the periods of pre-n is overcome.The new prediction method provides decision-makers with more decisionmaking information,and the initial conditions are easy to be given.
文摘In former researches there are primary theoretical studies and qualitative analyses on enterprise leaders' effectiveness and performance, and there are a few studies on quantitative analyses which mostly relies on the method of comparing differences and ratio of divergence to evaluate leaders' performance by stage statistics. This paper illustrates how to evaluate Comprehensive Efficiency (CE) based on Scientific Development Outlook, which reflects overall development of enterprise leaders' performance, depends on measuring Output Efficiency Index (OEI) and Cost Efficiency Index (CEI) of enterprise leaders' performance, and adopts the C^2R model in Data Envelopment Analysis (DEA).
基金Supported by Study and Mode Construction of Water and Fertilizer Coupling and Accurate Fertilizer and Drug Reduction High-yielding Synergistic Technology during Diversified Rice Planting in the West Part of the Middle and Lower Reaches of the Yangtze River(2017YFD0301700)National System of Rice Industrial Technology(CARS-01-25)
文摘Rice yields and nitrogen use efficiencies were studied at five sites in southwest China using two nitrogen fertilization rates and five controlled-release urea( CRU) to ordinary urea( U) ratios. The fertilizer treatments significantly increased rice yields compared with the control( no nitrogen added) yields to different degrees at different sites. Applying CRU and U increased the rice yield more than adding the same amount of nitrogen as U only. Higher increasing production rate were found using a nitrogen application rate of 105 kg/hm2 than 150 kg/hm2. A 70∶ 30 CRU∶ U ratio increased the yield more than other four ratios. Nitrogen use efficiency was 21. 9% higher using a nitrogen application rate of 105 kg/hm^2 than 150 kg/hm^2,and 46. 6%,38. 1%,34. 7%,and 22. 2% higher than when only U was applied when CRU∶ U ratios of 70 ∶ 30,50 ∶ 50,100 ∶ 0,and 30 ∶ 70,respectively,were used. A 70 ∶ 30 CRU ∶ U ratio gave the highest economic output( yuan/hm^2). Applying both CRU and U gave an output 3 078. 87 yuan/hm^2 higher at a nitrogen application rate of 150 kg/hm^2 than at a nitrogen application rate of 105 kg/hm^2. Economic output was always higher using both CRU and U than using U only. The highest economic output was given using a 70∶ 30 CRU∶ U ratio.Increasing the amount of nitrogen added decreased the output efficiency( per hm2) because CRU is expensive. Significant relationships were found between the yield increase rate and the proportion of CRU added( regression equation y = 7. 429 x-185. 7,R^2= 0. 663) and between the total rainfall over the whole growth period and the proportion of CRU added( y =-0. 087 1 x + 112. 29,R^2= 0. 687 9). These regression equations can be used to determine the appropriate proportion of CRU that should be added at a site,depending on the rainfall and target rice yield.
基金Funded by Guangdong Natural Science Foundation (No.00355991220615019)
文摘A numerical model of thermoelectric module (TEM) is created by academic analysis,and the impacts of the resistance ratio and thermoelement size on the output power and thermoelectric efficiency of the TEM are analyzed by the MATLAB numerical calculation.The numerical model is validated by the ANSYS thermal,electrical,and structural coupling simulation.The effects of the variable physical property parameters and contact effect on the output power and thermoelectric efficiency are evaluated,and the concept of aspect ratio optimal domain is proposed,which provides a new design approach for the TEM.
基金supported by National Natural Science Foundation of China(No.61302010)the Foundation of Science and Technology on High Power Microwave Laboratory,Central University Foundation(2013KW07)Work at the University of New Mexico in USA was supportedby ONR Grant N00014-13-1-0565
文摘Prticle-in-cell(PIC) simulations demonstrated that,when the relativistic magnetron with diffraction output(MDO) is applied with a 410 kV voltage pulse,or when the relativistic magnetron with radial output is applied with a 350 kV voltage pulse,electrons emitted from the cathode with high energy will strike the anode block wall.The emitted secondary electrons and backscattered electrons affect the interaction between electrons and RF fields induced by the operating modes,which decreases the output power in the radial output relativistic magnetron by about 15%(10%for the axial output relativistic magnetron),decreases the anode current by about 5%(5%for the axial output relativistic magnetron),and leads to a decrease of electronic efficiency by 8%(6%for the axial output relativistic magnetron).The peak value of the current formed by secondary and backscattered current equals nearly half of the amplitude of the anode current,which may help the growth of parasitic modes when the applied magnetic field is near the critical magnetic field separating neighboring modes.Thus,mode competition becomes more serious.
基金supported by the National Natural Science Key Foundation of China (No. 50590404)the Natural Science Foundation of Guangdong Province (No.8451401501000668)
文摘Thermally stable region of a seven-rod resonator is theoretically investigated. A plane-plane symmetric resonator, where the distance between two neighbor rods is two times of that between the rods and the mirrors, is adopted because of its large stable range. Based on the investigation, a seven-rod resonator with an average output power of 3.79 kW and an optical-to-optical efficiency of 53% is developed.
基金supported by the National Natural Science Foundation of China(Grant No.51876181)。
文摘In this study,a novel irreversible cyclic model of a capacitive mixing blue heat engine mainly consisting of super capacitors,charging and discharging circuits,a heat source,as well as two water sources with given salt concentrations is established for harvesting salinity gradient energy and waste heat.Additionally,the effects of the charging voltage and ratio of the minimum to maximum surface electric charge density on the thermodynamic efficiency and power output of the cycle are discussed.The maximum power output of the cycle is calculated.The optimized ranges of efficiency and power output as well as the temperatures of two isothermal processes are determined.It is established that during the isoelectric quantity process,there is not only an increase in thermal voltage owing to the temperature difference,but also an increase in concentration voltage owing to the salinity gradient.Consequently,the blue heat engine can obtain higher energy conversion efficiency than a conventional heat engine.When the temperature ratio of the heat source to the heat sink is 1.233,the maximum efficiency can reach approximately36%.The results obtained can promote the application of capacitive mixing technology in real life,reducing the consumption of fossil fuels.
基金supported by the National Natural Science Foundation of China(Grant No.51576207)
文摘This study reports a new model of an air standard Dual-Miller cycle(DMC) with two polytropic processes and heat transfer loss.The two reversible adiabatic processes which could not be realized in practice are replaced with two polytropic processes in order to more accurately reflect the practical working performance. The heat transfer loss is taken into account. The expressions of power output, thermal efficiency, entropy generation rate(EGR) and ecological function are addressed using finite-time thermodynamic theory. Through numerical calculations, the influences of compression ratio, cut-off ratio and polytropic exponent on the performance are thermodynamically analyzed. The model can be simplified to other cycle models under specific conditions, which means the results have an certain universality and may be helpful in the design of practical heat engines. It is shown that the entropy generation minimization does not always lead to the best system performance.
文摘With the acceleration of urbanization,cities are the main targets for carbon neutrality and urban energy is the terminal of energy consumption and the integration point of various energy systems.Therefore,there is a need to promote the development of urban green energy and achieve low input and high output to achieve a low-carbon economy in cities.Previous studies have not considered the input-output efficiency of urban green-energy development.This study fills this gap.Based on the economic-energy-environmental framework,an input-output efficiency-evaluation index system for urban green-energy development was constructed.Based on improved data-envelopment analysis,a comparative evaluation of the input-output efficiency of green-energy development was carried out in 30 provinces in China in 2019.Considering the differences in regions,the development of urban green energy in different provinces was classified.From the perspective of a low-carbon economy,economic growth factors and environmental constraint factors were set.Together with the generalized Divisia index approach,the input-output efficiency optimization directions of urban green-energy development were obtained.The results showed that the input-output efficiencies of urban green-energy development in Jiangsu,Zhejiang,Fujian,Inner Mongolia,Ningxia and other provinces and cities were relatively high.Provinces with faster economic development and higher environmental carrying capacity have advantages after optimization and will become pilot areas for the development of urban green energy.This research provides a reference for the development of urban green energy in various provinces from the input and output perspective.
文摘A frequency domain analysis is presented to determine the performance characteristics of a tunable all-optical wavelength converter using four-wave mixing (FWM) in a single mode fiber (SMF) around the zero dispersion wavelength using two pump lasers. The output converted signal power as well as efficiency evaluated at a bit rate of 10 Gb/s show that the signal power is substantially higher at lower values of wavelength separation.