This study investigates the impact of different water coupling coefficients on the blasting effect of red sandstone.The analysis is based on the theories of detonation wave and elastic wave,focusing on the variation i...This study investigates the impact of different water coupling coefficients on the blasting effect of red sandstone.The analysis is based on the theories of detonation wave and elastic wave,focusing on the variation in wall pressure of the blasting holes.Using DDNP explosive as the explosive load,blasting tests were conducted on red sandstone specimens with four different water coupling coefficients:1.20,1.33,1.50,and 2.00.The study examines the morphologies of the rock specimens after blasting under these different water coupling coefficients.Additionally,the fractal dimensions of the surface cracks resulting from the blasting were calculated to provide a quantitative evaluation of the extent of rock damage.CT scanning and 3D reconstruction were performed on the post-blasting specimens to visually depict the extent of damage and fractures within the rock.Additionally,the volume fractal dimension and damage degree of the post-blasting specimens are calculated.The findings are then combined with numerical simulation to facilitate auxiliary analysis.The results demonstrate that an increase in the water coupling coefficient leads to a reduction in the peak pressure on the hole wall and the crushing zone,enabling more of the explosion energy to be utilized for crack propagation following the explosion.The specimens exhibited distinct failure patterns,resulting in corresponding changes in fractal dimensions.The simulated pore wall pressure–time curve validated the derived theoretical results,whereas the stress cloud map and explosion energy-time curve demonstrated the buffering effect of the water medium.As the water coupling coefficient increases,the buffering effect of the water medium becomes increasingly prominent.展开更多
The model of a locally resonant (LR) epoxy/PZT-4 phononic crystal (PC)nanobeam with “spring-mass” resonators periodically attached to epoxy is proposed. The corresponding band structures are calculated by coupling E...The model of a locally resonant (LR) epoxy/PZT-4 phononic crystal (PC)nanobeam with “spring-mass” resonators periodically attached to epoxy is proposed. The corresponding band structures are calculated by coupling Euler beam theory, nonlocal piezoelectricity theory and plane wave expansion (PWE) method. Three complete band gaps with the widest total width less than 10GHz can be formed in the proposed nanobeam by comprehensively comparing the band structures of three kinds of LR PC nanobeams with resonators attached or not. Furthermore, influencing rules of the coupling fields between electricity and mechanics,“spring-mass” resonator, nonlocal effect and different geometric parameters on the first three band gaps are discussed and summarized. All the investigations are expected to be applied to realize the active control of vibration in the region of ultrahigh frequency.展开更多
In this study,the effects of surface exchange coefficients on simulations of Super Typhoon Megi(2010)are investigated using a fully coupled ocean-atmosphere-wave model.Several experiments are conducted using different...In this study,the effects of surface exchange coefficients on simulations of Super Typhoon Megi(2010)are investigated using a fully coupled ocean-atmosphere-wave model.Several experiments are conducted using different parameterization schemes for the drag(C_(D))and enthalpy exchange(C_(K))coefficients.For the selected case,considering only the leveling-off of C_(D)at high wind speeds does not effectively improve the simulated typhoon track,intensity,or size.We found that increasing C_(K)monotonically with wind speed(Komori et al.,2018)yields stronger winds and deeper pressures by enhancing latent and sensible heat fluxes,but typhoon intensity remains underestimated.We propose a new higher C_(K)than that from Komori et al.(2018)based on the theory of Emanuel(1995).This approach produces a greater modeled typhoon intensity that is in good agreement with the best track data and effectively improves the track error for the simulation.Improved accuracy for modeled typhoon intensity is achieved with the new coefficient because C_(K)/C_(D)reaches the threshold of about 0.75 predicted by Emanuel(1995).The new proposed C_(K)also results in a reasonably accurate modeled sea surface temperature.However,typhoon size and surface wave height are overestimated.This finding implies that more numerical tests for tropical cyclones of different nature(such as strong,weak,dissipating,rapidly intensifying,or weakening tropical cyclones)should be studied,and more physical processes should be explored in future coupled models.展开更多
We derive the multi-hump nondegenerate solitons for the(2+1)-dimensional coupled nonlinear Schrodinger equations with propagation distance dependent diffraction,nonlinearity and gain(loss)using the developing Hirota b...We derive the multi-hump nondegenerate solitons for the(2+1)-dimensional coupled nonlinear Schrodinger equations with propagation distance dependent diffraction,nonlinearity and gain(loss)using the developing Hirota bilinear method,and analyze the dynamical behaviors of these nondegenerate solitons.The results show that the shapes of the nondegenerate solitons are controllable by selecting different wave numbers,varying diffraction and nonlinearity parameters.In addition,when all the variable coefficients are chosen to be constant,the solutions obtained in this study reduce to the shape-preserving nondegenerate solitons.Finally,it is found that the nondegenerate two-soliton solutions can be bounded to form a double-hump two-soliton molecule after making the velocity of one double-hump soliton resonate with that of the other one.展开更多
It has been proved that there exists a cross coupling between vertical heat turbulent transport and vertical velocity by using linear thermodynamics. This result asserts that the vertical component of heat turbulent t...It has been proved that there exists a cross coupling between vertical heat turbulent transport and vertical velocity by using linear thermodynamics. This result asserts that the vertical component of heat turbulent transport flux is composed of both the transport of the vertical potential temperature gradient and the coupling transport of the vertical velocity. In this paper, the coupling effect of vertical velocity on vertical heat turbulent transportation is validated by using observed data from the atmospheric boundary layer to determine cross coupling coefficients, and a series of significant properties of turbulent transportation are opened out. These properties indicate that the cross coupling coefficient is a logarithm function of the dimensionless vertical velocity and dimensionless height, and is not only related to the friction velocity u., but also to the coupling roughness height zwo and the coupling temperature Two of the vertical velocity. In addition, the function relations suggest that only when the vertical velocity magnitude conforms to the limitation IW/u. I # 1, and is above the level zwo, then the vertical velocity leads to the cross coupling effect on the vertical heat turbulent transport flux. The cross coupling theory and experimental results provide a challenge to the traditional turbulent K closure theory and the Monin-Obukhov similarity theory.展开更多
The reconstruction of emission coefficient is a key factor for the calculation of temperature field.However,most of the researches for determining arc plasmas are based on axisymmetric sources,little has been done to ...The reconstruction of emission coefficient is a key factor for the calculation of temperature field.However,most of the researches for determining arc plasmas are based on axisymmetric sources,little has been done to study non-axisymmetric arc plasmas.In order to reveal temperatures of a non-axisymmetric coupling arc,the distribution of emission coefficients must be reconstructed in advance.In this paper,the argon atomic line intensities of the coupling arc are obtained by using the imaging system that involves a high speed camera in conjunction with a neutral and a narrow-band filter.The converted programme between emission coefficients and emitted intensities is programmed based on MALDONADO＇s method.A displaced Gaussian model is used for evaluating the validity of the converted programme.Then,the emission coefficients of a free burning arc are reconstructed by MALDONADO＇s method and an Abel inversion,respectively,and good agreement is obtained.Finally,the emission coefficient profiles of the coupling arc are achieved.The results show that the distribution of emission coefficient for the coupling arc is non-axisymmetric.The emission coefficient profile is similar to an ellipse,and the short axis of the ellipse is in the direction that the two electrodes are arranged along.The peak temperature of the coupling arc is in the middle of both electrodes.There is a strong interaction between both arcs within the coupling arc.The proposed research solves difficulties for determining asymmetric arcs and enlarges the application scope of spectroscopic techniques.展开更多
We propose a method for estimating the mutual coupling coefficient among antennas in this paper which is based on the principle of signal subspace and the simulated annealing （SA） algorithm. The computer simulation ...We propose a method for estimating the mutual coupling coefficient among antennas in this paper which is based on the principle of signal subspace and the simulated annealing （SA） algorithm. The computer simulation has been conducted to illustrate the＇ excellent performance of this method and to demonstrate that it is statistically efficient. The benefit of this new method is that calibration signals and unknown signals can be received simultaneously, during the course of calibration.展开更多
In this paper,we present the applications of Boundary Element Method(BEM) to simulate the electro-mechanical coupling responses of Micro-Electro-Mechanical systems(MEMS). The algorithm is programmed in our research gr...In this paper,we present the applications of Boundary Element Method(BEM) to simulate the electro-mechanical coupling responses of Micro-Electro-Mechanical systems(MEMS). The algorithm is programmed in our research group based on BEM modeling for electrostatics and elastostatics.Good agreement is shown while the simulation results of the pull-in voltages are compared with the theoretical/experimental ones for some examples.展开更多
According to a uniform and simple method of calculating spin-lattice coupling coefficients and the pert1rbation formulas of gi factors and hyperfine structure constants Ai based on the cluster approach for 3d7 ions in...According to a uniform and simple method of calculating spin-lattice coupling coefficients and the pert1rbation formulas of gi factors and hyperfine structure constants Ai based on the cluster approach for 3d7 ions in cubic,tetragonal and trigonal octahedral crystal fields, the spin-lattice coupling coefficients Fij (F11, Fl2, F44), Zij (Z11, Z12,Z44) and also g factor and hyperfine constant A for MgO:Co2+ are calculated by using the parameters obtained from the optical spectra without adjustable parameters. The calculated results show good agreement with the observed values.The difiiculty in explaining the coeficients Fij and Zij is therefore removed.展开更多
<div style="text-align:justify;"> Currently, coupled mode theory (CMT) is widely used for calculating the coupling coefficient of twin-core fibers (TCFs) that are used in a broad range of important app...<div style="text-align:justify;"> Currently, coupled mode theory (CMT) is widely used for calculating the coupling coefficient of twin-core fibers (TCFs) that are used in a broad range of important applications. This approach is highly accurate for scenarios with weak coupling between the cores but shows significant errors in the strong coupling scenarios, necessitating the use of a more accurate method for coupling coefficient calculations. Therefore, in this work, we calculate the coupling coefficients of TCFs using the supermode theory with finite element method (FEM) that has higher accuracy than CMT, particularly for the strong coupling TCF. To investigate the origin of the differences between the results obtained by these two methods, the modal field distributions of the supermodes of TCF are simulated and analyzed in detail. </div>展开更多
The response relationship between equivalent neutral wind speed anomaly(ENWSA)and sea-air temperature difference anomaly(SATDA)has been analyzed over four typical sea regions,i.e.,the Kuroshio Extension,the Gulf Strea...The response relationship between equivalent neutral wind speed anomaly(ENWSA)and sea-air temperature difference anomaly(SATDA)has been analyzed over four typical sea regions,i.e.,the Kuroshio Extension,the Gulf Stream,the Brazil-Malvinas Confluence and the Agulhas Return Current.The results show that ENWSA is more sensitive to SATDA than sea surface temperature anomaly(SSTA),which implies that SATDA seems to be a more suitable parameter than SSTA to analyze the mesoscale air-sea interactions.Here,the slope of the linear relation between ENWSA and SATDA is defined as the air-sea coupling coefficient.It is found that the values of the coupling coefficient over the four typical sea areas have obvious seasonal variations and geographical differences.In order to reveal the reason of the seasonal variation and geographical difference of the coupling coefficient,the influences of some environmental background factors,such as the spatially averaged sea surface temperature(SST),the spatially averaged air temperature,the spatially averaged sea-air temperature difference and the spatially averaged equivalent neutral wind speed,on the coupling coefficient are discussed in detail.The results reveal that the background sea-air temperature difference is an important environmental factor which directly affects the magnitude of the coupling coefficients,meanwhile,the seasonal and geographical variations of the coupling coefficient.展开更多
The first six Chebyshev polynomial coefficients (i.e., A00, A01, A10, A11, A02, A20) were derived from monthly mean geopotential height over East Asia for the period 1951-1983. Spectral analysis of these coefficients ...The first six Chebyshev polynomial coefficients (i.e., A00, A01, A10, A11, A02, A20) were derived from monthly mean geopotential height over East Asia for the period 1951-1983. Spectral analysis of these coefficients reveals relative maxima of power in the frequency bands of 200 months (- 16.7 years), 25 months (the quasi-biennial oscillation), 5-6 months, and 2-3 months. Cross-spectral characteristics between Chebyshev coefficients and the Southern Oscillation Index (SOI) were also explored. Coherence spectrum for the zonal and meridional circulation index (A01 and A 10) with the SOI was significant near 4 years, the QBO, and 2-3 months. Some physical explanations were offered for the spatial linkages (i.e., teleconnections) between the SO and atmospheric circulation anomalies overEast Asia.展开更多
By the two-scale homogenization approach we justify a two-scale model of ion transport through a layered membrane, with flows being driven by a pressure gradient and an external electrical field. By up-scaling, the el...By the two-scale homogenization approach we justify a two-scale model of ion transport through a layered membrane, with flows being driven by a pressure gradient and an external electrical field. By up-scaling, the electroosmotic flow equations in horizontal thin slits separated by thin solid layers are approximated by a homogenized system of macroscale equations in the form of the Poisson equation for induced vertical electrical field and Onsager's reciprocity relations between global fluxes (hydrodynamic and electric) and forces (horizontal pressure gradient and external electrical field). In addition, the two-scale approach provides macroscopic mobility coefficients in the Onsager relations. On this way, the cross-coupling kinetic coefficient is obtained in a form which does involves the ζ -potential among the data provided the surface current is negligible.展开更多
A quite general coupled variable coefficient modified KdV (VCmKdV) equation in a two-layer fluid systemis derived by means of the reductive perturbation method.Making use of the CK's direct method,some similarityr...A quite general coupled variable coefficient modified KdV (VCmKdV) equation in a two-layer fluid systemis derived by means of the reductive perturbation method.Making use of the CK's direct method,some similarityreductions of the coupled VCmKdV equation are obtained and their corresponding group explanations are discussed.Some exact solutions of the coupled equations are also presented.展开更多
A complex interface exists between waterflow and solid particles during hydraulic soil erosion.In this study,the particle discrete element method(DEM)has been used to simulate the hydraulic erosion of a granular soil ...A complex interface exists between waterflow and solid particles during hydraulic soil erosion.In this study,the particle discrete element method(DEM)has been used to simulate the hydraulic erosion of a granular soil under moving bed conditions and surrounding terrain changes.Moreover,the weakly compressible smoothed particle hydrodynamics(WCSPH)approach has been exploited to simulate the instability process of the free surfacefluid and its propagation characteristics at the solid–liquid interface.The influence of a suspended medium on the waterflow dynamics has been characterized using the mixed viscosity concept accounting for the solid–liquid mixed particle volume ratio.Numerical simulations of wall-jet scouring and reservoir sedimentflushing on a mobile bed were performed and validated with experiments.The results show that the proposed WCSPH–DEM coupling model is highly suitable for determining parameters,such as the local maximum scour depth,the scour pit width,and the sand bed profile.The effects on the hydraulic erosion process of two important para-meters of the mixed viscosity coefficient(initial solid volume concentration and initial viscosity coefficient)are also discussed to a certain extent in this study.展开更多
1 INTRODUCTIONKnowledge of the basic transport phenomena of ions in an ion exchange membrane isimportant for the application of such a membrane.Various studies on the developmentof mathematical models for predicting a...1 INTRODUCTIONKnowledge of the basic transport phenomena of ions in an ion exchange membrane isimportant for the application of such a membrane.Various studies on the developmentof mathematical models for predicting and correlating membrane transport rate havebeen published in recent years.More exact estimation of the diffusion coefficientshas been the subject of chief concern in many of these papers.For a bi-ionic systemwith the same valence,Sato et al.gave a method for estimating diffusion coefficients展开更多
By means of sn-function expansion method and cn-function expansion method, several kinds of explicit solutions to the coupled KdV equations with variable coefficients are obtained, which include three sets of periodic...By means of sn-function expansion method and cn-function expansion method, several kinds of explicit solutions to the coupled KdV equations with variable coefficients are obtained, which include three sets of periodic wave-like solutions. These solutions degenerate to solitary wave-like solutions at a certain limit. Some new solutions are presented.展开更多
This study investigated the interdiffusion of calcium ferrite/calcium titanate system in the time range of 0-120 min by the diffusion couple method in a CO/N2 reducing atmosphere at 700℃.The results show that after t...This study investigated the interdiffusion of calcium ferrite/calcium titanate system in the time range of 0-120 min by the diffusion couple method in a CO/N2 reducing atmosphere at 700℃.The results show that after the diffusion reaction occurred,no longitudinal agglomerations were present on the substrate surface on the calcium titanate side.When the diffusion time was increased to 105 min,a net vacancy flow from calcium titanate to calcium ferrite might have occurred,causing the surface of the calcium ferrite substrate to collapse.The thickness of the diffusion layer of the calcium ferrite/calcium titanate system was about 17-48μm,which conforms to the parabolic law of diffusion.The diffusion coefficient and the Ti^4+concentration in the calcium ferrite/calcium titanate system are related.This shows an increase in the diffusion coefficient with the increase of Ti^4+concentration,and the diffusion coefficient value was in the range of 10^−12-10^−11 cm^2·s^−1.展开更多
This article lists all possible conversion equations of influence coefficients(ICs)with different formats when some of these are known to handle two-plane balancing tasks with no or less trial weight runs.There are tw...This article lists all possible conversion equations of influence coefficients(ICs)with different formats when some of these are known to handle two-plane balancing tasks with no or less trial weight runs.There are two approaches for two-plane balancing.One can treat it as a multi-plane balance problem involving a 2×2 matrix of complex ICs where two direct ICs along with two cross-effect ICs are generated so that correction weights at one or two balance planes can be determined.One can also apply a static pare(in-phase)and/or couple pair(180 degrees out-of-phase)weights for balancing.The latter approach has been used quite often in the field,especially on steam turbine and generator rotors.Dependent on vibration mode shapes and combinations as well as balance plane accessibility,sometimes applying static or couple pair weights can be a wise choice;other times weights at one or two end planes are needed.There are totally 4 possible sets of IC data due to weights at plane 1,plane 2,static pair,and couple pair.IC data would typically be obtained by applying trial weights followed by trial weight runs.It is found,however,that all these IC data can be converted easily without trial weight runs once any two of 4 sets are known.The above findings and conversion equations have been obtained analytically and verified by experimental results.Real cases are given to demonstratetheirapplications.展开更多
This paper presents an efficient meshless method for analyzing cracked piezoelectric structures subjected to mechanical and electrical loading. In this method, an element free Galerkin （EFG） formulation, an enriched...This paper presents an efficient meshless method for analyzing cracked piezoelectric structures subjected to mechanical and electrical loading. In this method, an element free Galerkin （EFG） formulation, an enriched basic function and some special shape functions that contain discontinuous derivatives are employed. Based on the moving least squares （MLS） interpolation approach, the EFG method is one of the promising methods for dealing with problems involving progressive crack growth. Since the method is meshless and no element connectivity data are needed, the burdensome remeshing procedure required in the conventional finite element method （FEM） is avoided. The numerical results show that the proposed method can yield an accurate near-tip stress field in an infinite piezoelectric plate containing an interior hole. In another example studying a ceramic multilayer actuator, the proposed model was found to be accurate in the simulation of stress and electric field concentrations arround the abrupt end of an internal electrode.展开更多
基金National Key Research and Development Program of China(2021YFC2902103)National Natural Science Foundation of China(51934001)Fundamental Research Funds for the Central Universities(2023JCCXLJ02).
文摘This study investigates the impact of different water coupling coefficients on the blasting effect of red sandstone.The analysis is based on the theories of detonation wave and elastic wave,focusing on the variation in wall pressure of the blasting holes.Using DDNP explosive as the explosive load,blasting tests were conducted on red sandstone specimens with four different water coupling coefficients:1.20,1.33,1.50,and 2.00.The study examines the morphologies of the rock specimens after blasting under these different water coupling coefficients.Additionally,the fractal dimensions of the surface cracks resulting from the blasting were calculated to provide a quantitative evaluation of the extent of rock damage.CT scanning and 3D reconstruction were performed on the post-blasting specimens to visually depict the extent of damage and fractures within the rock.Additionally,the volume fractal dimension and damage degree of the post-blasting specimens are calculated.The findings are then combined with numerical simulation to facilitate auxiliary analysis.The results demonstrate that an increase in the water coupling coefficient leads to a reduction in the peak pressure on the hole wall and the crushing zone,enabling more of the explosion energy to be utilized for crack propagation following the explosion.The specimens exhibited distinct failure patterns,resulting in corresponding changes in fractal dimensions.The simulated pore wall pressure–time curve validated the derived theoretical results,whereas the stress cloud map and explosion energy-time curve demonstrated the buffering effect of the water medium.As the water coupling coefficient increases,the buffering effect of the water medium becomes increasingly prominent.
基金supported by the National Natural Science Foundation of China(51979130,11847009)the Young Elite Scientists Sponsorship Program by CAST(2022QNRC001)+1 种基金the Natural Science Foundation of Jiangsu Higher Education Institutions of China(22KJB580005)the Postgraduate Research&Practice Innovation Program of Jiangsu Province(SJCX221961)。
文摘The model of a locally resonant (LR) epoxy/PZT-4 phononic crystal (PC)nanobeam with “spring-mass” resonators periodically attached to epoxy is proposed. The corresponding band structures are calculated by coupling Euler beam theory, nonlocal piezoelectricity theory and plane wave expansion (PWE) method. Three complete band gaps with the widest total width less than 10GHz can be formed in the proposed nanobeam by comprehensively comparing the band structures of three kinds of LR PC nanobeams with resonators attached or not. Furthermore, influencing rules of the coupling fields between electricity and mechanics,“spring-mass” resonator, nonlocal effect and different geometric parameters on the first three band gaps are discussed and summarized. All the investigations are expected to be applied to realize the active control of vibration in the region of ultrahigh frequency.
基金supported by the National Natural Science Foundation of China(Nos.41906014,U20A2099 and 41976017)。
文摘In this study,the effects of surface exchange coefficients on simulations of Super Typhoon Megi(2010)are investigated using a fully coupled ocean-atmosphere-wave model.Several experiments are conducted using different parameterization schemes for the drag(C_(D))and enthalpy exchange(C_(K))coefficients.For the selected case,considering only the leveling-off of C_(D)at high wind speeds does not effectively improve the simulated typhoon track,intensity,or size.We found that increasing C_(K)monotonically with wind speed(Komori et al.,2018)yields stronger winds and deeper pressures by enhancing latent and sensible heat fluxes,but typhoon intensity remains underestimated.We propose a new higher C_(K)than that from Komori et al.(2018)based on the theory of Emanuel(1995).This approach produces a greater modeled typhoon intensity that is in good agreement with the best track data and effectively improves the track error for the simulation.Improved accuracy for modeled typhoon intensity is achieved with the new coefficient because C_(K)/C_(D)reaches the threshold of about 0.75 predicted by Emanuel(1995).The new proposed C_(K)also results in a reasonably accurate modeled sea surface temperature.However,typhoon size and surface wave height are overestimated.This finding implies that more numerical tests for tropical cyclones of different nature(such as strong,weak,dissipating,rapidly intensifying,or weakening tropical cyclones)should be studied,and more physical processes should be explored in future coupled models.
基金supported by the National Natural Science Foundation of China (Grant Nos.11975204 and 12075208)the Project of Zhoushan City Science and Technology Bureau (Grant No.2021C21015)the Training Program for Leading Talents in Universities of Zhejiang Province。
文摘We derive the multi-hump nondegenerate solitons for the(2+1)-dimensional coupled nonlinear Schrodinger equations with propagation distance dependent diffraction,nonlinearity and gain(loss)using the developing Hirota bilinear method,and analyze the dynamical behaviors of these nondegenerate solitons.The results show that the shapes of the nondegenerate solitons are controllable by selecting different wave numbers,varying diffraction and nonlinearity parameters.In addition,when all the variable coefficients are chosen to be constant,the solutions obtained in this study reduce to the shape-preserving nondegenerate solitons.Finally,it is found that the nondegenerate two-soliton solutions can be bounded to form a double-hump two-soliton molecule after making the velocity of one double-hump soliton resonate with that of the other one.
基金This study has been supported by the National Natural Science Foundation of China under Grant No. 40633014.
文摘It has been proved that there exists a cross coupling between vertical heat turbulent transport and vertical velocity by using linear thermodynamics. This result asserts that the vertical component of heat turbulent transport flux is composed of both the transport of the vertical potential temperature gradient and the coupling transport of the vertical velocity. In this paper, the coupling effect of vertical velocity on vertical heat turbulent transportation is validated by using observed data from the atmospheric boundary layer to determine cross coupling coefficients, and a series of significant properties of turbulent transportation are opened out. These properties indicate that the cross coupling coefficient is a logarithm function of the dimensionless vertical velocity and dimensionless height, and is not only related to the friction velocity u., but also to the coupling roughness height zwo and the coupling temperature Two of the vertical velocity. In addition, the function relations suggest that only when the vertical velocity magnitude conforms to the limitation IW/u. I # 1, and is above the level zwo, then the vertical velocity leads to the cross coupling effect on the vertical heat turbulent transport flux. The cross coupling theory and experimental results provide a challenge to the traditional turbulent K closure theory and the Monin-Obukhov similarity theory.
基金supported by National Natural Science Foundation of China (Grant Nos. 51175119,50775053)
文摘The reconstruction of emission coefficient is a key factor for the calculation of temperature field.However,most of the researches for determining arc plasmas are based on axisymmetric sources,little has been done to study non-axisymmetric arc plasmas.In order to reveal temperatures of a non-axisymmetric coupling arc,the distribution of emission coefficients must be reconstructed in advance.In this paper,the argon atomic line intensities of the coupling arc are obtained by using the imaging system that involves a high speed camera in conjunction with a neutral and a narrow-band filter.The converted programme between emission coefficients and emitted intensities is programmed based on MALDONADO＇s method.A displaced Gaussian model is used for evaluating the validity of the converted programme.Then,the emission coefficients of a free burning arc are reconstructed by MALDONADO＇s method and an Abel inversion,respectively,and good agreement is obtained.Finally,the emission coefficient profiles of the coupling arc are achieved.The results show that the distribution of emission coefficient for the coupling arc is non-axisymmetric.The emission coefficient profile is similar to an ellipse,and the short axis of the ellipse is in the direction that the two electrodes are arranged along.The peak temperature of the coupling arc is in the middle of both electrodes.There is a strong interaction between both arcs within the coupling arc.The proposed research solves difficulties for determining asymmetric arcs and enlarges the application scope of spectroscopic techniques.
基金Supported by the 863 High Technology Project ofChina (2001AA631050)
文摘We propose a method for estimating the mutual coupling coefficient among antennas in this paper which is based on the principle of signal subspace and the simulated annealing （SA） algorithm. The computer simulation has been conducted to illustrate the＇ excellent performance of this method and to demonstrate that it is statistically efficient. The benefit of this new method is that calibration signals and unknown signals can be received simultaneously, during the course of calibration.
基金The project supported by the 973 Program (G1999033108)the National Natural Science Foundation of China (10125211)
文摘In this paper,we present the applications of Boundary Element Method(BEM) to simulate the electro-mechanical coupling responses of Micro-Electro-Mechanical systems(MEMS). The algorithm is programmed in our research group based on BEM modeling for electrostatics and elastostatics.Good agreement is shown while the simulation results of the pull-in voltages are compared with the theoretical/experimental ones for some examples.
文摘According to a uniform and simple method of calculating spin-lattice coupling coefficients and the pert1rbation formulas of gi factors and hyperfine structure constants Ai based on the cluster approach for 3d7 ions in cubic,tetragonal and trigonal octahedral crystal fields, the spin-lattice coupling coefficients Fij (F11, Fl2, F44), Zij (Z11, Z12,Z44) and also g factor and hyperfine constant A for MgO:Co2+ are calculated by using the parameters obtained from the optical spectra without adjustable parameters. The calculated results show good agreement with the observed values.The difiiculty in explaining the coeficients Fij and Zij is therefore removed.
文摘<div style="text-align:justify;"> Currently, coupled mode theory (CMT) is widely used for calculating the coupling coefficient of twin-core fibers (TCFs) that are used in a broad range of important applications. This approach is highly accurate for scenarios with weak coupling between the cores but shows significant errors in the strong coupling scenarios, necessitating the use of a more accurate method for coupling coefficient calculations. Therefore, in this work, we calculate the coupling coefficients of TCFs using the supermode theory with finite element method (FEM) that has higher accuracy than CMT, particularly for the strong coupling TCF. To investigate the origin of the differences between the results obtained by these two methods, the modal field distributions of the supermodes of TCF are simulated and analyzed in detail. </div>
基金The National Key Research and Development Program of China under contract No.2016YFC1401008the National Natural Science Foundation of China under contract Nos 41976167 and 41576170the National Natural Science Foundation of ChinaShandong Joint Fund for Marine Science Research Centers under contract No.U1606404.
文摘The response relationship between equivalent neutral wind speed anomaly(ENWSA)and sea-air temperature difference anomaly(SATDA)has been analyzed over four typical sea regions,i.e.,the Kuroshio Extension,the Gulf Stream,the Brazil-Malvinas Confluence and the Agulhas Return Current.The results show that ENWSA is more sensitive to SATDA than sea surface temperature anomaly(SSTA),which implies that SATDA seems to be a more suitable parameter than SSTA to analyze the mesoscale air-sea interactions.Here,the slope of the linear relation between ENWSA and SATDA is defined as the air-sea coupling coefficient.It is found that the values of the coupling coefficient over the four typical sea areas have obvious seasonal variations and geographical differences.In order to reveal the reason of the seasonal variation and geographical difference of the coupling coefficient,the influences of some environmental background factors,such as the spatially averaged sea surface temperature(SST),the spatially averaged air temperature,the spatially averaged sea-air temperature difference and the spatially averaged equivalent neutral wind speed,on the coupling coefficient are discussed in detail.The results reveal that the background sea-air temperature difference is an important environmental factor which directly affects the magnitude of the coupling coefficients,meanwhile,the seasonal and geographical variations of the coupling coefficient.
文摘The first six Chebyshev polynomial coefficients (i.e., A00, A01, A10, A11, A02, A20) were derived from monthly mean geopotential height over East Asia for the period 1951-1983. Spectral analysis of these coefficients reveals relative maxima of power in the frequency bands of 200 months (- 16.7 years), 25 months (the quasi-biennial oscillation), 5-6 months, and 2-3 months. Cross-spectral characteristics between Chebyshev coefficients and the Southern Oscillation Index (SOI) were also explored. Coherence spectrum for the zonal and meridional circulation index (A01 and A 10) with the SOI was significant near 4 years, the QBO, and 2-3 months. Some physical explanations were offered for the spatial linkages (i.e., teleconnections) between the SO and atmospheric circulation anomalies overEast Asia.
文摘By the two-scale homogenization approach we justify a two-scale model of ion transport through a layered membrane, with flows being driven by a pressure gradient and an external electrical field. By up-scaling, the electroosmotic flow equations in horizontal thin slits separated by thin solid layers are approximated by a homogenized system of macroscale equations in the form of the Poisson equation for induced vertical electrical field and Onsager's reciprocity relations between global fluxes (hydrodynamic and electric) and forces (horizontal pressure gradient and external electrical field). In addition, the two-scale approach provides macroscopic mobility coefficients in the Onsager relations. On this way, the cross-coupling kinetic coefficient is obtained in a form which does involves the ζ -potential among the data provided the surface current is negligible.
基金The project supported by National Natural Science Foundation of China under Grant Nos.10547124,10475055,and 90503006the Youth Foundation of Shanghai Jiao Tong University
文摘A quite general coupled variable coefficient modified KdV (VCmKdV) equation in a two-layer fluid systemis derived by means of the reductive perturbation method.Making use of the CK's direct method,some similarityreductions of the coupled VCmKdV equation are obtained and their corresponding group explanations are discussed.Some exact solutions of the coupled equations are also presented.
基金funded by the National Natural Science Foundation of China(No.51568022)the Science and Technology Project of Education Department,Jiangxi Province,China(No.GJJ217404).
文摘A complex interface exists between waterflow and solid particles during hydraulic soil erosion.In this study,the particle discrete element method(DEM)has been used to simulate the hydraulic erosion of a granular soil under moving bed conditions and surrounding terrain changes.Moreover,the weakly compressible smoothed particle hydrodynamics(WCSPH)approach has been exploited to simulate the instability process of the free surfacefluid and its propagation characteristics at the solid–liquid interface.The influence of a suspended medium on the waterflow dynamics has been characterized using the mixed viscosity concept accounting for the solid–liquid mixed particle volume ratio.Numerical simulations of wall-jet scouring and reservoir sedimentflushing on a mobile bed were performed and validated with experiments.The results show that the proposed WCSPH–DEM coupling model is highly suitable for determining parameters,such as the local maximum scour depth,the scour pit width,and the sand bed profile.The effects on the hydraulic erosion process of two important para-meters of the mixed viscosity coefficient(initial solid volume concentration and initial viscosity coefficient)are also discussed to a certain extent in this study.
基金Supported by the Post-doctoral Foundation of China
文摘1 INTRODUCTIONKnowledge of the basic transport phenomena of ions in an ion exchange membrane isimportant for the application of such a membrane.Various studies on the developmentof mathematical models for predicting and correlating membrane transport rate havebeen published in recent years.More exact estimation of the diffusion coefficientshas been the subject of chief concern in many of these papers.For a bi-ionic systemwith the same valence,Sato et al.gave a method for estimating diffusion coefficients
文摘By means of sn-function expansion method and cn-function expansion method, several kinds of explicit solutions to the coupled KdV equations with variable coefficients are obtained, which include three sets of periodic wave-like solutions. These solutions degenerate to solitary wave-like solutions at a certain limit. Some new solutions are presented.
基金This work was financially supported by the National Natural Science Foundation of China(No.51674084).
文摘This study investigated the interdiffusion of calcium ferrite/calcium titanate system in the time range of 0-120 min by the diffusion couple method in a CO/N2 reducing atmosphere at 700℃.The results show that after the diffusion reaction occurred,no longitudinal agglomerations were present on the substrate surface on the calcium titanate side.When the diffusion time was increased to 105 min,a net vacancy flow from calcium titanate to calcium ferrite might have occurred,causing the surface of the calcium ferrite substrate to collapse.The thickness of the diffusion layer of the calcium ferrite/calcium titanate system was about 17-48μm,which conforms to the parabolic law of diffusion.The diffusion coefficient and the Ti^4+concentration in the calcium ferrite/calcium titanate system are related.This shows an increase in the diffusion coefficient with the increase of Ti^4+concentration,and the diffusion coefficient value was in the range of 10^−12-10^−11 cm^2·s^−1.
文摘This article lists all possible conversion equations of influence coefficients(ICs)with different formats when some of these are known to handle two-plane balancing tasks with no or less trial weight runs.There are two approaches for two-plane balancing.One can treat it as a multi-plane balance problem involving a 2×2 matrix of complex ICs where two direct ICs along with two cross-effect ICs are generated so that correction weights at one or two balance planes can be determined.One can also apply a static pare(in-phase)and/or couple pair(180 degrees out-of-phase)weights for balancing.The latter approach has been used quite often in the field,especially on steam turbine and generator rotors.Dependent on vibration mode shapes and combinations as well as balance plane accessibility,sometimes applying static or couple pair weights can be a wise choice;other times weights at one or two end planes are needed.There are totally 4 possible sets of IC data due to weights at plane 1,plane 2,static pair,and couple pair.IC data would typically be obtained by applying trial weights followed by trial weight runs.It is found,however,that all these IC data can be converted easily without trial weight runs once any two of 4 sets are known.The above findings and conversion equations have been obtained analytically and verified by experimental results.Real cases are given to demonstratetheirapplications.
基金supported by the National Natural Science Foundation of China(10025209,10132010,and 90208002)the Research Grants Council of the Hong Kong Special Administrative Region,China(HKU 7203/03E).
文摘This paper presents an efficient meshless method for analyzing cracked piezoelectric structures subjected to mechanical and electrical loading. In this method, an element free Galerkin （EFG） formulation, an enriched basic function and some special shape functions that contain discontinuous derivatives are employed. Based on the moving least squares （MLS） interpolation approach, the EFG method is one of the promising methods for dealing with problems involving progressive crack growth. Since the method is meshless and no element connectivity data are needed, the burdensome remeshing procedure required in the conventional finite element method （FEM） is avoided. The numerical results show that the proposed method can yield an accurate near-tip stress field in an infinite piezoelectric plate containing an interior hole. In another example studying a ceramic multilayer actuator, the proposed model was found to be accurate in the simulation of stress and electric field concentrations arround the abrupt end of an internal electrode.
