Electrolytic aqueous zinc-manganese(Zn–Mn) batteries have the advantage of high discharge voltage and high capacity due to two-electron reactions. However, the pitfall of electrolytic Zn–Mn batteries is the sluggish...Electrolytic aqueous zinc-manganese(Zn–Mn) batteries have the advantage of high discharge voltage and high capacity due to two-electron reactions. However, the pitfall of electrolytic Zn–Mn batteries is the sluggish deposition reaction kinetics of manganese oxide during the charge process and short cycle life. We show that, incorporating ZnO electrolyte additive can form a neutral and highly viscous gel-like electrolyte and render a new form of electrolytic Zn–Mn batteries with significantly improved charging capabilities. Specifically, the ZnO gel-like electrolyte activates the zinc sulfate hydroxide hydrate assisted Mn^(2+) deposition reaction and induces phase and structure change of the deposited manganese oxide(Zn_(2)Mn_(3)O_8·H_(2)O nanorods array), resulting in a significant enhancement of the charge capability and discharge efficiency. The charge capacity increases to 2.5 mAh cm^(-2) after 1 h constant-voltage charging at 2.0 V vs. Zn/Zn^(2+), and the capacity can retain for up to 2000 cycles with negligible attenuation. This research lays the foundation for the advancement of electrolytic Zn–Mn batteries with enhanced charging capability.展开更多
Iron-rich electrolytic manganese residue(IREMR)is an industrial waste produced during the processing of electrolytic metal manganese,and it contains certain amounts of Fe and Mn resources and other heavy metals.In thi...Iron-rich electrolytic manganese residue(IREMR)is an industrial waste produced during the processing of electrolytic metal manganese,and it contains certain amounts of Fe and Mn resources and other heavy metals.In this study,the slurry electrolysis technique was used to recover high-purity Fe powder from IREMR.The effects of IREMR and H2SO4 mass ratio,current density,reaction temper-ature,and electrolytic time on the leaching and current efficiencies of Fe were studied.According to the results,high-purity Fe powder can be recovered from the cathode plate,and the slurry electrolyte can be recycled.The leaching efficiency,current efficiency,and purity of Fe reached 92.58%,80.65%,and 98.72wt%,respectively,at a 1:2.5 mass ratio of H2SO4 and IREMR,reaction temperature of 60℃,electric current density of 30 mA/cm^(2),and reaction time of 8 h.In addition,vibrating sample magnetometer(VSM)analysis showed that the coercivity of electrolytic iron powder was 54.5 A/m,which reached the advanced magnetic grade of electrical pure-iron powder(DT4A coercivity standard).The slurry electrolytic method provides fundamental support for the industrial application of Fe resource recovery in IRMER.展开更多
CO_(2) electrolysis with solid oxide electrolytic cells(SOECs)using intermittently available renewable energy has potential applications for carbon neutrality and energy storage.In this study,a pulsed current strategy...CO_(2) electrolysis with solid oxide electrolytic cells(SOECs)using intermittently available renewable energy has potential applications for carbon neutrality and energy storage.In this study,a pulsed current strategy is used to replicate intermittent energy availability,and the stability and conversion rate of the cyclic operation by a large-scale flat-tube SOEC are studied.One hundred cycles under pulsed current ranging from -100 to -300 mA/cm^(2) with a total operating time of about 800 h were carried out.The results show that after 100 cycles,the cell voltage attenuates by 0.041%/cycle in the high current stage of−300 mA/cm^(2),indicating that the lifetime of the cell can reach up to about 500 cycles.The total CO_(2) conversion rate reached 52%,which is close to the theoretical value of 54.3% at -300 mA/cm^(2),and the calculated efficiency approached 98.2%,assuming heat recycling.This study illustrates the significant advantages of SOEC in efficient electrochemical energy conversion,carbon emission mitigation,and seasonal energy storage.展开更多
Here we prepared PEO coatings on Mg alloys in silicate-NaOH-phosphate electrolyte containing different concentrations of NaF addition.The detailed microstructural characterizations combining with potentiodynamic polar...Here we prepared PEO coatings on Mg alloys in silicate-NaOH-phosphate electrolyte containing different concentrations of NaF addition.The detailed microstructural characterizations combining with potentiodynamic polarization and electrochemical impedance spectra(EIS)were employed to investigate the roles of fluoride in the growth and corrosion properties of PEO coating on Mg.The result shows the introduction of NaF led to a fluoride-containing nanolayer(FNL)formed at the Mg/coating interface.The FNL consists of MgO nanoparticles and insoluble MgF_(2)nanoparticles(containing rutile phase and cubic phase).The increase in the NaF concentration of the electrolyte increases the thickness and the MgF_(2)content in the FNL.When anodized in the electrolyte containing 2 g/L NaF,the formed FNL has the highest thickness of 100-200 nm along with the highest value of x of∼0.6 in(MgO)_(1-x)(MgF_(2))x resulted in the highest corrosion performance of PEO coating.In addition,when anodized in the electrolyte containing a low NaF concentration(0.4-0.8 g/L),the formed FNL was thin and discontinuous,which would decrease the pore density and increase the coating's uniformness simultaneously.展开更多
Electrolytic manganese residue(EMR)can cause serious environmental and biological hazards.In order to solve the problem,zeolite A(EMRZA)and zeolite X(EMRZX)were synthesized by EMR.The pure phase zeolites were synthesi...Electrolytic manganese residue(EMR)can cause serious environmental and biological hazards.In order to solve the problem,zeolite A(EMRZA)and zeolite X(EMRZX)were synthesized by EMR.The pure phase zeolites were synthesized by alkaline melting and hydrothermal two-step process,which had high crystallinity and excellent crystal control.And the optimum conditions for synthesis of zeolite were investigated:NaOH-EMR mass ratio=1.2,L/S=10,hydrothermal temperature=90℃,and hydrothermal time=6 h.Then,EMRZA and EMRZX showed excellent adsorption of Cd^(2+).When T=25℃,time=120min,pH=6,C0=518 mg·L^(-1),and quantity of absorbent=1.5 g·L^(-1),the adsorption capacities of EMRZA and EMRZX reached 314.2 and 289,5 mg·g^(-1),respectively,In addition,after three repeated adsorption-desorption cycles,EMRZA and EMRZX retained 80%and 74%of the initial zeolites removal rates,respectively.Moreover,adsorption results followed quasi-second-order kinetics and monolayer adsorption,which was regulated by a combination of chemisorption and intra-particle diffusion mechanisms.The adsorption mechanism was ions exchange between Cd^(2+)and Na+.In summary,it has been confirmed that EMRZA and EMRZX can be reused as highly efficient adsorbents to treat Cd^(2+)-contaminated wastewater.展开更多
Magnesium(Mg) alloys are well-known in biomedical materials owing to their elastic module near to bone, biocompatibility and biodegradation properties. Nevertheless, poor corrosion resistance hinders their biomedical ...Magnesium(Mg) alloys are well-known in biomedical materials owing to their elastic module near to bone, biocompatibility and biodegradation properties. Nevertheless, poor corrosion resistance hinders their biomedical applications. Besides, it is necessary to endow Mg alloys with bioactive property, which is crucial for temporary bone implants. Here, a self-healing, corrosion resistant and bioactive duplex coating of plasma electrolytic oxidization(PEO)/polydopamine(PDA) is applied on AZ91 substrate using PEO and subsequent electrodeposition process. Moreover, the role of different electrodeposition times(60 s, 120 s) and dopamine concentrations(1 and 1.5 mg/ml) to improve corrosion resistance, bioactivity, biocompatibility and self-healing property and its mechanism are investigated. The results indicate that the PEO coating is efficiently sealed by the PDA, depending on the electrodeposition parameters. Noticeably, electrodeposition for 120 s in dopamine concentration of 1 mg/ml(120T-1C) results in the formation of uniform and crack-free PDA coating. Duplex PEO/PDA coatings reveal high bioactivity compared to PEO coating, owing to electrostatic interaction between PDA top-layer and calcium and phosphate ions as well as high hydrophilicity of coatings. In addition, duplex PEO/PDA coatings also show improved and more stable protective performance than the PEO and bare alloy, depending on the PDA deposition parameters. Noticeably, the corrosion current density of the 120T-1C decreases one orders of magnitude compared to PEO. In addition, the presence of a broad passivation region in the anodic polarization branch shows durable self-healing property via Zipper-like mechanism, demonstrating the duplex coating could preserve promising corrosion resistance.Furthermore, the cytocompatibility of duplex coated samples is also confirmed via interaction with MG63 cells. In summary, the PEO/PDA coating with great corrosion protection, self-healing ability, bioactivity and biocompatibility could be a promising candidate for degradable magnesium-based implants.展开更多
In-situ incorporation of layered double hydroxides(LDH)nanocontainers into plasma electrolytic oxidation(PEO)coatings on AZ91 Mg alloy has been achieved in the present study.Fumarate was selected as Mg corrosion inhib...In-situ incorporation of layered double hydroxides(LDH)nanocontainers into plasma electrolytic oxidation(PEO)coatings on AZ91 Mg alloy has been achieved in the present study.Fumarate was selected as Mg corrosion inhibitor for exchange and intercalation into the nanocontainers,which were subsequently incorporated into the coating.It was found that the thickness and compactness of the coatings were increased in the presence of LDH nanocontainers.The corrosion protection performance of the blank PEO,LDH containing PEO and inhibitor loaded coatings was evaluated by means of polarization test and electrochemical impedance spectroscopy(EIS).The degradation process and corrosion resistance of PEO coating were found to be greatly affected by the loaded inhibitor and nanocontainers by means of ion-exchange when corrosion occurs,leading to enhanced and stable corrosion resistance of the substrate.展开更多
Magnesium alloys are lightweight materials with great potential,and plasma electrolytic oxidation(PEO)is effective surface treatment for necessary improvement of corrosion resistance of magnesium alloys.However,the∼1...Magnesium alloys are lightweight materials with great potential,and plasma electrolytic oxidation(PEO)is effective surface treatment for necessary improvement of corrosion resistance of magnesium alloys.However,the∼14µm thick and rough PEO protection layer has inferior wear resistance,which limits magnesium alloys as sliding or reciprocating parts,where magnesium alloys have special advantages by their inherent damping and denoising properties and attractive light-weighting.Here a novel super wear-resistant coating for magnesium alloys was achieved,via the discontinuous sealing(DCS)of a 1.3µm thick polytetrafluoroethylene(PTFE)polymer layer with an initial area fraction(A_(f))of 70%on the necessary PEO protection layer by selective spraying,and the wear resistance was exceptionally enhanced by∼5500 times in comparison with the base PEO coating.The initial surface roughness(Sa)under PEO+DCS(1.54µm)was imperfectly 59%higher than that under PEO and conventional continuous sealing(CS).Interestingly,DCS was surprisingly 20 times superior for enhancing wear resistance in contrast to CS.DCS induced nano-cracks that splitted DCS layer into multilayer nano-blocks,and DCS also provided extra space for the movement of nano-blocks,which resulted in rolling friction and nano lubrication.Further,DCS promoted mixed wear of the PTFE polymer layer and the PEO coating,and the PTFE layer(HV:6 Kg·mm^(−2),A_(f):92.2%)and the PEO coating(HV:310 Kg·mm^(−2),A_(f):7.8%)served as the soft matrix and the hard point,respectively.Moreover,the dynamic decrease of Sa by 29%during wear also contributed to the super wear resistance.The strategy of depositing a low-frictional discontinuous layer on a rough and hard layer or matrix also opens a window for achieving super wear-resistant coatings in other materials.展开更多
Plasma electrochemical oxidation (PEO) is a surface modification technology to form ceramic coatings on magnesium alloys However,its application is limited due to its defects.This work reports a novel preparation of i...Plasma electrochemical oxidation (PEO) is a surface modification technology to form ceramic coatings on magnesium alloys However,its application is limited due to its defects.This work reports a novel preparation of in-situ sealing of PEO coatings by four-layer voltage and sol addition.The morphology and structure were characterized by scanning electron microscopy (SEM),energy dispersive X-ray spectroscopy (EDS),and X-ray diffractometer (XRD).Image-Pro Plus 6.0 was used to determine the porosity of the coating,which was decreased from 8.53%to 0.51%.Simultaneously,the coating thickness was increased by a factor of four.The anti-corrosion performance of each sample was evaluated using electrochemical tests,and the findings revealed that the corrosion current density of coatings (i_(corr)) of the samples were lowered from 9.152×10^(-2) to 6.152×10^(-4) mA·cm^(-2),and the total resistance (R_(T)) of the samples were enhanced from 2.19×10^(4) to 2.33×10^(5)Ω·cm^(2).The salt spray test used to simulate the actual environment showed that corrosion points appeared on the surface of the coating only at the 336 h.In addition,the mechanism of PEO self-sealing behavior was described in this article.展开更多
Mg and its alloys have been introduced as promising biodegradable materials for biomedical implant applications due to their excellent biocompatibility, mechanical behavior, and biodegradability. However, their suscep...Mg and its alloys have been introduced as promising biodegradable materials for biomedical implant applications due to their excellent biocompatibility, mechanical behavior, and biodegradability. However, their susceptibility to rapid corrosion within the body poses a significant challenge and restricts their applications. To overcome this issue, various surface modification techniques have been developed to enhance the corrosion resistance and bioactivity of Mg-based implants. PEO is a potent technique for producing an oxide film on a surface that significantly minimizes the tendency to corrode. However, the inevitable defects due to discharges and poor biological activity during the coating process remain a concern. Therefore, adding suitable particles during the coating process is a suitable solution. Hydroxyapatite(HAp)has attracted much attention in the development of biomedical applications in the scientific community. HAp shows excellent biocompatibility due to its similarity in chemical composition to the mineral portion of bone. Therefore, its combination with Mg-based implants through PEO has shown significant improvements in their corrosion resistance and bioactivity. This review paper provides a comprehensive overview of the recent advances in the preparation, characterization, corrosion behavior and bioactivity applications of HAp particles on Mg-based implants by PEO.展开更多
This work looked into the influence of the sealing treatment on the structural feature and electrochemical response of AZ31 Mg alloy coated via plasma electrolytic oxidation(PEO).Here,the inorganic layers produced by ...This work looked into the influence of the sealing treatment on the structural feature and electrochemical response of AZ31 Mg alloy coated via plasma electrolytic oxidation(PEO).Here,the inorganic layers produced by PEO in an alkaline-phosphate electrolyte were subsequently immersed for different periods in cold(60°C)and hot(100°C)aqueous solutions containing either 1 or 3 gr of cobalt nitrate hexahydrate in the presence of hydrogen peroxide as an initiator.The results showed that the sealing treatments in the hot solutions could trigger the hydration reactions of PEO coating which would largely assist the surface incorporation of Co_(3)O_(4)into the coating.In contrast,the sealing in cold solutions led to less compact coatings,which was attributed to the fact the hydration reactions would be restricted at 60°C.A nearly fully sealed coating with a porosity of~0.5%was successfully formed on the sample immersed in the hot solution containing 1 gr of cobalt nitrate hexahydrate.Thus,the electrochemical stability of this fully sealed coating was superior to the other samples as it had the lowest corrosion current density(4.71×10^(-10)A·cm^(-2))and the highest outer layer resistance(3.81×10^(7)Ω·cm^(2)).The composite coatings developed in this study are ideal for applications requiring high electrochemical stability.展开更多
Reducing CO_(2) to produce methane through microbial electrolytic cell(MEC)is one of the important methods of CO_(2) resource utilization.In view of the problem of low methanogenesis rate and weak CO_(2) conversion ra...Reducing CO_(2) to produce methane through microbial electrolytic cell(MEC)is one of the important methods of CO_(2) resource utilization.In view of the problem of low methanogenesis rate and weak CO_(2) conversion rate in the reduction process,theflowfield environment of the cathode chamber is changed by changing the upper gas cir-culation rate and the lower liquid circulation rate of the cathode chamber to explore the impact on the reactor startup and operation and products.The results showed that under certain conditions,the CO_(2) consumption and methane production rate could be increased by changing the upper gas recirculation rate alone,but the increase effect was not obvious,but the by-product hydrogen production decreased significantly.Changing the lower liquid circulation rate alone can effectively promote the growth of biofilm,and change the properties of biofilm at the later stage of the experiment,with the peak current density increased by 16%;The methanogenic rate decreased from the peak value of 0.561 to 0.3 mmol/d,and the CO_(2) consumption did not change signifi-cantly,which indicated that CO_(2) was converted into other organic substances instead of methane.The data after coupling the upper gas circulation rate with the lower liquid circulation rate is similar to that of only changing the lower liquid circulation rate,but changing the upper gas circulation rate can alleviate the decline of methane pro-duction rate caused by the change of biofilm properties,which not only improves the current density,but also increases the methane production rate by 0.05 mmol/d in the stable period.This study can provide theoretical and technical support for the industrial application scenario offlowfield regulation intervention of microbial elec-trolytic cell methanogenesis.展开更多
Plasma Electrolyte Oxidation(PEO)process has increasingly been employed to improve magnesium surface properties by fabrication of an MgO-based coating.Originating from conventional anodizing procedures,this high-volta...Plasma Electrolyte Oxidation(PEO)process has increasingly been employed to improve magnesium surface properties by fabrication of an MgO-based coating.Originating from conventional anodizing procedures,this high-voltage process produces an adhesive ceramic film on the surface.The present article provides a comprehensive review around mechanisms of PEO coatings fabrication and their different properties.Due to complexity of PEO coatings formation,a complete explanation regarding fabrication mechanisms of PEO coatings has not yet been proposed;however,the most important advancements in the field of fabrication mechanisms of PEO coatings were gathered in this work.Mechanisms of PEO coatings fabrication on magnesium were reviewed considering voltage–time plots,optical spectrometry,acoustic emission spectrometry and electronic properties of the ceramic film.Afterwards,the coatings properties,affecting parameters and improvement strategies were discussed.In addition,corrosion resistance of coatings,important factors in corrosion resistance and methods for corrosion resistance improvement were considered.Tribological properties(important factors and improvement methods)of coatings were also studied.Since magnesium and its alloys are broadly used in biological applications,the biological properties of PEO coatings,important factors in their biological performance and existing methods for improvement of coatings were explained.Addition of ceramic based nanoparticles and formation of nanocomposite coatings may considerably influence properties of plasma electrolyte oxidation coatings.Nanocomposite coatings properties and nanoparticles adsorption mechanisms were included in a separate sector.Another method to improve coatings properties is formation of hybrid coatings on PEO coatings which was discussed in the end.展开更多
The plasma electrolytic oxidation(PEO)procedure is utilized in order to amend the surface properties of Mg and its alloys.This procedure creates a ceramic coating on the surface applying high-voltage.The presence of d...The plasma electrolytic oxidation(PEO)procedure is utilized in order to amend the surface properties of Mg and its alloys.This procedure creates a ceramic coating on the surface applying high-voltage.The presence of deep pores and porosities in the surface that affect the corrosion resistance of the coatings is one of the PEO procedure limitations.One of the useful methods to decrease porosities of coating and improve its final properties is changing electrolyte conditions based on the presence of micro-and nanoparticles.The present paper reviews the mechanisms of particle adsorption and composition in PEO thin films in addition to the effect of particle addition on the microstructure,composition and corrosion behavior of coatings that were applied on magnesium alloys.展开更多
Plasma electrolytic oxidation(PEO),a promising surface treatment method to improve the corrosion and wear resistance of magnesium and its alloys,operates at high voltages,resulting in a relatively high energy cost.To ...Plasma electrolytic oxidation(PEO),a promising surface treatment method to improve the corrosion and wear resistance of magnesium and its alloys,operates at high voltages,resulting in a relatively high energy cost.To make the PEO process more economically viable,its energy efficiency needs to be improved.This study investigates the growth behaviour and microstructural characteristics of low-energy PEO coatings on an AM50 magnesium alloy in a concentrated electrolyte containing sodium tetraborate.The surface morphology of the coatings was different from typical PEO coating morphologies and a large voltage oscillation was observed during treatment.Using different characterisation techniques,and based on a micro-discharge model,a correlation was made between the voltage-time behaviour,microdischarge characteristics and the composition and microstructure of the coated samples.The results suggest electrolyte chemistry can somewhat control discharge behaviour,which plays an important role in PEO coating growth.展开更多
The growth kinetics of PEO coatings on AZ31 and AZ91 magnesium alloys were studied and correlated with their structure,compositions(phase and elemental)and corrosion resistance.It was established that the coatings hav...The growth kinetics of PEO coatings on AZ31 and AZ91 magnesium alloys were studied and correlated with their structure,compositions(phase and elemental)and corrosion resistance.It was established that the coatings have a two-(outer and anodic)or three-layer structure(outer,inner and anodic)depending on the treatment time.Briefly,at short treatment time only an anodic layer and outer layer exists.Growth of the outer PEO layer takes place due to the micro discharges,which occur in vertical pores and voids with spherical cross-section.If the time is increasing,and electrolyte inside of the pores is heating-up,etching of the Mg substrate and oxide film becomes more dominant and horizontal pores in the interface between coating and metal are formed.In the pores new anodic layer will form and at this time the formation of the third inner layer starts.The growth of the inner layer happens via the anodic film as a result of micro discharge ignition in the horizontal pores,accompanied by formation of plasma in numerous micro-voids of this layer.The coatings formed on AZ91 alloy are denser,than those on AZ31,which is related to the difference in the rates of inner layer growth and dissolving of oxides which are located at the bottom of the horizontal pores.Because of the lower Al content,the AZ31 substrate itself and the also the oxide films are less stable and tend to dissolve at a higher rate compared to AZ91.Thus,it was demonstrated that a good corrosion resistance of the coatings was only obtained on AZ91 and if the average thickness of the coating is around 50μm,correlating with the formation of a sufficiently dense inner laye-Knowing this mechanism,a new two-step treatment was suggested,combining the standard PEO treatment with a subsequent PEO process in an electrolyte supporting the inner film formation.The concept was successfully applied and a further improved corrosion resistance was obtained compared to the single stage PEO process.This improvement of corrosion resistance was related to the better sealing of porosity and formation of a denser inner layer.展开更多
An environmentally friendly and resource-conserving route to the clean production of electrolytic manganese was developed,in which the electrolytic manganese residue(EMR)was initially calcined for cement buffering;the...An environmentally friendly and resource-conserving route to the clean production of electrolytic manganese was developed,in which the electrolytic manganese residue(EMR)was initially calcined for cement buffering;then the generated SO2-containing flue gas was managed using manganese oxide ore and anolyte(MOOA)desulfurization;at last,the desulfurized slurry was introduced to the electrolytic manganese production(EMP).Results showed that 4.0 wt%coke addition reduced the sulfur of calcined EMR to 0.9%,thereby satisfying the cement-buffer requirement.Pilot-scale desulfurization showed that about 7.5 vol%of high SO2 containing flue gas can be cleaned to less than 0.1 vol%through a five-stage countercurrent MOOA desulfurization.The desulfurized slurry had 42.44 g·L-Mn2+and 1.92 g·L-1 S2 O62-,which was suitable for electrowinning after purification,and the purity of manganese product was 99.93%,satisfy the National Standard of China YB/T051-2015.This new integrated technology fulfilled 99.7%of sulfur reutilization from the EMR and 94.1%was effectively used to the EMP.The MOOA desulfurization linked the EMP a closed cycle without any pollutant discharge,which promoted the cleaner production of EMP industry.展开更多
Plasma electrolytic oxidation(PEO)coatings were prepared on AZ91D magnesium alloys in alkaline silicate-based electrolyte with and without additives.The mutual effects among additives including TiC particles,dispersan...Plasma electrolytic oxidation(PEO)coatings were prepared on AZ91D magnesium alloys in alkaline silicate-based electrolyte with and without additives.The mutual effects among additives including TiC particles,dispersant polyethylene glycol 6000(PEG6000)and anionic surfactant sodium dodecyl sulfate(SDS)were studied based on orthogonal experiment.The content and distribution of TiC deposited in the coatings were measured by EPMA and EDS.The thicknesses,phase compositions,microstructures and corrosion resistances of the codlings were cAarnined by using TT260 eddy current tuickncss gage,XRD,SEM and clcctrochcniical test,respectively.The results show that the experiment design of this study is the key to study the mutual effects among these additives.Each additive and their interactions all remarkably influence TiC content and corrosion resistance of the coatings.Smaller size TiC is much easier to migrate towards the anode,and the interaction between PEG6000 and SDS both effectively prevents its agglomeration and increases the number of its negative surface charges,which further increase the migration rate and the deposited uniformity of TiC and make TiC have more opportunity to deposit in the discharge channel.Thus,when smaller size TiC,PEG6000 and SDS are all added into the electrolyte,they could improve the anti-corrosion property of the coating to the largest extent attributed to higher TiC content and the densest microstructure of the coating.展开更多
Magnesium has been known as an appropriate biological material on account of its good biocompatibility and biodegradability properties in addition to advantageous mechanical properties.Mg and its alloys are of poor co...Magnesium has been known as an appropriate biological material on account of its good biocompatibility and biodegradability properties in addition to advantageous mechanical properties.Mg and its alloys are of poor corrosion resistance.Its high corrosion rate leads to its quick decomposition in the corrosive ambiance and as a result weakening its mechanical properties and before it is repaired,it will vanish.The corrosion and degradation rate must be controlled in the body to advance the usage of Mg and its alloys as implants.Different techniques have been utilized to boost biological properties.Plasma electrolytic oxidation(PEO)can provide porous and biocompatible coatings for implants among various techniques.Biodegradable implants are generally supposed to show enough corrosion resistance and mechanical integrity in the body environment.Much research has been carried out in order to produce PEO coatings containing calcium phosphate compounds.Calcium phosphates are really similar to bone mineral composition and present great biocompatibility.The present study deals with the usage of calcium phosphates as biocompatible coatings applied on Mg and its alloys to study the properties and control the corrosion rate.展开更多
基金financially supported by National Natural Science Foundation of China (22209133, 22272131, 21972111, 22211540712)Natural Science Foundation of Chongqing (CSTB2022NSCQ-MSX1411)+1 种基金Chongqing Engineering Research Center for Micro-Nano Biomedical Materials and DevicesChongqing Key Laboratory for Advanced Materials and Technologies。
文摘Electrolytic aqueous zinc-manganese(Zn–Mn) batteries have the advantage of high discharge voltage and high capacity due to two-electron reactions. However, the pitfall of electrolytic Zn–Mn batteries is the sluggish deposition reaction kinetics of manganese oxide during the charge process and short cycle life. We show that, incorporating ZnO electrolyte additive can form a neutral and highly viscous gel-like electrolyte and render a new form of electrolytic Zn–Mn batteries with significantly improved charging capabilities. Specifically, the ZnO gel-like electrolyte activates the zinc sulfate hydroxide hydrate assisted Mn^(2+) deposition reaction and induces phase and structure change of the deposited manganese oxide(Zn_(2)Mn_(3)O_8·H_(2)O nanorods array), resulting in a significant enhancement of the charge capability and discharge efficiency. The charge capacity increases to 2.5 mAh cm^(-2) after 1 h constant-voltage charging at 2.0 V vs. Zn/Zn^(2+), and the capacity can retain for up to 2000 cycles with negligible attenuation. This research lays the foundation for the advancement of electrolytic Zn–Mn batteries with enhanced charging capability.
基金supported by the Key Research and Development Program of Guangxi Province,China (No.AB23075174)the National Natural Science Foundation of China (No.52174386)the Science and Technology Plan Project of Sichuan Province,China (No.2022YFS0459).
文摘Iron-rich electrolytic manganese residue(IREMR)is an industrial waste produced during the processing of electrolytic metal manganese,and it contains certain amounts of Fe and Mn resources and other heavy metals.In this study,the slurry electrolysis technique was used to recover high-purity Fe powder from IREMR.The effects of IREMR and H2SO4 mass ratio,current density,reaction temper-ature,and electrolytic time on the leaching and current efficiencies of Fe were studied.According to the results,high-purity Fe powder can be recovered from the cathode plate,and the slurry electrolyte can be recycled.The leaching efficiency,current efficiency,and purity of Fe reached 92.58%,80.65%,and 98.72wt%,respectively,at a 1:2.5 mass ratio of H2SO4 and IREMR,reaction temperature of 60℃,electric current density of 30 mA/cm^(2),and reaction time of 8 h.In addition,vibrating sample magnetometer(VSM)analysis showed that the coercivity of electrolytic iron powder was 54.5 A/m,which reached the advanced magnetic grade of electrical pure-iron powder(DT4A coercivity standard).The slurry electrolytic method provides fundamental support for the industrial application of Fe resource recovery in IRMER.
基金National Key Research&Development Project,Grant/Award Number:2017YFE0129300Ningbo Science and Technology Innovation 2025 Major Project,Grant/Award Numbers:2019B10046,2020Z107+2 种基金Zhejiang Provincial Key R&D Program,Grant/Award Number:2021C01101National Natural Science Foundation of China,Grant/Award Numbers:U20A20251,11932005The from 0 to 1 Innovative Program of CAS,Grant/Award Number:ZDBS-LY-JSC021。
文摘CO_(2) electrolysis with solid oxide electrolytic cells(SOECs)using intermittently available renewable energy has potential applications for carbon neutrality and energy storage.In this study,a pulsed current strategy is used to replicate intermittent energy availability,and the stability and conversion rate of the cyclic operation by a large-scale flat-tube SOEC are studied.One hundred cycles under pulsed current ranging from -100 to -300 mA/cm^(2) with a total operating time of about 800 h were carried out.The results show that after 100 cycles,the cell voltage attenuates by 0.041%/cycle in the high current stage of−300 mA/cm^(2),indicating that the lifetime of the cell can reach up to about 500 cycles.The total CO_(2) conversion rate reached 52%,which is close to the theoretical value of 54.3% at -300 mA/cm^(2),and the calculated efficiency approached 98.2%,assuming heat recycling.This study illustrates the significant advantages of SOEC in efficient electrochemical energy conversion,carbon emission mitigation,and seasonal energy storage.
基金Zhu.L.and Li.H.contributed equally to this work.This work is supported by the National Natural Science Foundation of China(Grant No.51901121)the Natural Science Foundation of Shaanxi Province(Grant No.2021JM-203,2019JQ-433,2020zdzx04-03-02)the Fundamental Research Funds for the Central Universities(Grant No.GK202103022).
文摘Here we prepared PEO coatings on Mg alloys in silicate-NaOH-phosphate electrolyte containing different concentrations of NaF addition.The detailed microstructural characterizations combining with potentiodynamic polarization and electrochemical impedance spectra(EIS)were employed to investigate the roles of fluoride in the growth and corrosion properties of PEO coating on Mg.The result shows the introduction of NaF led to a fluoride-containing nanolayer(FNL)formed at the Mg/coating interface.The FNL consists of MgO nanoparticles and insoluble MgF_(2)nanoparticles(containing rutile phase and cubic phase).The increase in the NaF concentration of the electrolyte increases the thickness and the MgF_(2)content in the FNL.When anodized in the electrolyte containing 2 g/L NaF,the formed FNL has the highest thickness of 100-200 nm along with the highest value of x of∼0.6 in(MgO)_(1-x)(MgF_(2))x resulted in the highest corrosion performance of PEO coating.In addition,when anodized in the electrolyte containing a low NaF concentration(0.4-0.8 g/L),the formed FNL was thin and discontinuous,which would decrease the pore density and increase the coating's uniformness simultaneously.
基金supported by the National Natural Science Foundation of China(52164036,U1960201,51764007)the Guizhou Province Graduate Research Fund(YJSKYJJ(2021)003).
文摘Electrolytic manganese residue(EMR)can cause serious environmental and biological hazards.In order to solve the problem,zeolite A(EMRZA)and zeolite X(EMRZX)were synthesized by EMR.The pure phase zeolites were synthesized by alkaline melting and hydrothermal two-step process,which had high crystallinity and excellent crystal control.And the optimum conditions for synthesis of zeolite were investigated:NaOH-EMR mass ratio=1.2,L/S=10,hydrothermal temperature=90℃,and hydrothermal time=6 h.Then,EMRZA and EMRZX showed excellent adsorption of Cd^(2+).When T=25℃,time=120min,pH=6,C0=518 mg·L^(-1),and quantity of absorbent=1.5 g·L^(-1),the adsorption capacities of EMRZA and EMRZX reached 314.2 and 289,5 mg·g^(-1),respectively,In addition,after three repeated adsorption-desorption cycles,EMRZA and EMRZX retained 80%and 74%of the initial zeolites removal rates,respectively.Moreover,adsorption results followed quasi-second-order kinetics and monolayer adsorption,which was regulated by a combination of chemisorption and intra-particle diffusion mechanisms.The adsorption mechanism was ions exchange between Cd^(2+)and Na+.In summary,it has been confirmed that EMRZA and EMRZX can be reused as highly efficient adsorbents to treat Cd^(2+)-contaminated wastewater.
文摘Magnesium(Mg) alloys are well-known in biomedical materials owing to their elastic module near to bone, biocompatibility and biodegradation properties. Nevertheless, poor corrosion resistance hinders their biomedical applications. Besides, it is necessary to endow Mg alloys with bioactive property, which is crucial for temporary bone implants. Here, a self-healing, corrosion resistant and bioactive duplex coating of plasma electrolytic oxidization(PEO)/polydopamine(PDA) is applied on AZ91 substrate using PEO and subsequent electrodeposition process. Moreover, the role of different electrodeposition times(60 s, 120 s) and dopamine concentrations(1 and 1.5 mg/ml) to improve corrosion resistance, bioactivity, biocompatibility and self-healing property and its mechanism are investigated. The results indicate that the PEO coating is efficiently sealed by the PDA, depending on the electrodeposition parameters. Noticeably, electrodeposition for 120 s in dopamine concentration of 1 mg/ml(120T-1C) results in the formation of uniform and crack-free PDA coating. Duplex PEO/PDA coatings reveal high bioactivity compared to PEO coating, owing to electrostatic interaction between PDA top-layer and calcium and phosphate ions as well as high hydrophilicity of coatings. In addition, duplex PEO/PDA coatings also show improved and more stable protective performance than the PEO and bare alloy, depending on the PDA deposition parameters. Noticeably, the corrosion current density of the 120T-1C decreases one orders of magnitude compared to PEO. In addition, the presence of a broad passivation region in the anodic polarization branch shows durable self-healing property via Zipper-like mechanism, demonstrating the duplex coating could preserve promising corrosion resistance.Furthermore, the cytocompatibility of duplex coated samples is also confirmed via interaction with MG63 cells. In summary, the PEO/PDA coating with great corrosion protection, self-healing ability, bioactivity and biocompatibility could be a promising candidate for degradable magnesium-based implants.
基金support from National Natural Science Foundation of China(No.52071067 and U1737102)Mobility Programme of the Sino-German Center(M-0056)+1 种基金the Fundamental Research Funds for the Central Universities(N2002009)FUNCOAT project(H2020-MSCA-RISE-2018,Grant Agreement N 823942).
文摘In-situ incorporation of layered double hydroxides(LDH)nanocontainers into plasma electrolytic oxidation(PEO)coatings on AZ91 Mg alloy has been achieved in the present study.Fumarate was selected as Mg corrosion inhibitor for exchange and intercalation into the nanocontainers,which were subsequently incorporated into the coating.It was found that the thickness and compactness of the coatings were increased in the presence of LDH nanocontainers.The corrosion protection performance of the blank PEO,LDH containing PEO and inhibitor loaded coatings was evaluated by means of polarization test and electrochemical impedance spectroscopy(EIS).The degradation process and corrosion resistance of PEO coating were found to be greatly affected by the loaded inhibitor and nanocontainers by means of ion-exchange when corrosion occurs,leading to enhanced and stable corrosion resistance of the substrate.
基金This work was financially supported by the Jiangsu Distinguished Professor Project,the Innovate UK(Project reference:10004694)the National Key R&D Program of China 2021YFB3401200.The Experimental Techniques Centre at Brunel University London and Nanjing University of Aeronautics and Astronautics are acknowledged.The authors also acknowledge the characterization facility at Shanghai Jiao Tong University,Central South University,University of Birmingham and University of Lille.
文摘Magnesium alloys are lightweight materials with great potential,and plasma electrolytic oxidation(PEO)is effective surface treatment for necessary improvement of corrosion resistance of magnesium alloys.However,the∼14µm thick and rough PEO protection layer has inferior wear resistance,which limits magnesium alloys as sliding or reciprocating parts,where magnesium alloys have special advantages by their inherent damping and denoising properties and attractive light-weighting.Here a novel super wear-resistant coating for magnesium alloys was achieved,via the discontinuous sealing(DCS)of a 1.3µm thick polytetrafluoroethylene(PTFE)polymer layer with an initial area fraction(A_(f))of 70%on the necessary PEO protection layer by selective spraying,and the wear resistance was exceptionally enhanced by∼5500 times in comparison with the base PEO coating.The initial surface roughness(Sa)under PEO+DCS(1.54µm)was imperfectly 59%higher than that under PEO and conventional continuous sealing(CS).Interestingly,DCS was surprisingly 20 times superior for enhancing wear resistance in contrast to CS.DCS induced nano-cracks that splitted DCS layer into multilayer nano-blocks,and DCS also provided extra space for the movement of nano-blocks,which resulted in rolling friction and nano lubrication.Further,DCS promoted mixed wear of the PTFE polymer layer and the PEO coating,and the PTFE layer(HV:6 Kg·mm^(−2),A_(f):92.2%)and the PEO coating(HV:310 Kg·mm^(−2),A_(f):7.8%)served as the soft matrix and the hard point,respectively.Moreover,the dynamic decrease of Sa by 29%during wear also contributed to the super wear resistance.The strategy of depositing a low-frictional discontinuous layer on a rough and hard layer or matrix also opens a window for achieving super wear-resistant coatings in other materials.
基金financially supported by the Guangxi Natural Science Foundation(No.2020GXNSFAA159011)the National Natural Science Foundation of China(No.51664011)。
文摘Plasma electrochemical oxidation (PEO) is a surface modification technology to form ceramic coatings on magnesium alloys However,its application is limited due to its defects.This work reports a novel preparation of in-situ sealing of PEO coatings by four-layer voltage and sol addition.The morphology and structure were characterized by scanning electron microscopy (SEM),energy dispersive X-ray spectroscopy (EDS),and X-ray diffractometer (XRD).Image-Pro Plus 6.0 was used to determine the porosity of the coating,which was decreased from 8.53%to 0.51%.Simultaneously,the coating thickness was increased by a factor of four.The anti-corrosion performance of each sample was evaluated using electrochemical tests,and the findings revealed that the corrosion current density of coatings (i_(corr)) of the samples were lowered from 9.152×10^(-2) to 6.152×10^(-4) mA·cm^(-2),and the total resistance (R_(T)) of the samples were enhanced from 2.19×10^(4) to 2.33×10^(5)Ω·cm^(2).The salt spray test used to simulate the actual environment showed that corrosion points appeared on the surface of the coating only at the 336 h.In addition,the mechanism of PEO self-sealing behavior was described in this article.
文摘Mg and its alloys have been introduced as promising biodegradable materials for biomedical implant applications due to their excellent biocompatibility, mechanical behavior, and biodegradability. However, their susceptibility to rapid corrosion within the body poses a significant challenge and restricts their applications. To overcome this issue, various surface modification techniques have been developed to enhance the corrosion resistance and bioactivity of Mg-based implants. PEO is a potent technique for producing an oxide film on a surface that significantly minimizes the tendency to corrode. However, the inevitable defects due to discharges and poor biological activity during the coating process remain a concern. Therefore, adding suitable particles during the coating process is a suitable solution. Hydroxyapatite(HAp)has attracted much attention in the development of biomedical applications in the scientific community. HAp shows excellent biocompatibility due to its similarity in chemical composition to the mineral portion of bone. Therefore, its combination with Mg-based implants through PEO has shown significant improvements in their corrosion resistance and bioactivity. This review paper provides a comprehensive overview of the recent advances in the preparation, characterization, corrosion behavior and bioactivity applications of HAp particles on Mg-based implants by PEO.
基金supported by the National Research Foundation of Korea(NRF)funded by the Korean government(MSIT)(No.2022R1A2C1006743)
文摘This work looked into the influence of the sealing treatment on the structural feature and electrochemical response of AZ31 Mg alloy coated via plasma electrolytic oxidation(PEO).Here,the inorganic layers produced by PEO in an alkaline-phosphate electrolyte were subsequently immersed for different periods in cold(60°C)and hot(100°C)aqueous solutions containing either 1 or 3 gr of cobalt nitrate hexahydrate in the presence of hydrogen peroxide as an initiator.The results showed that the sealing treatments in the hot solutions could trigger the hydration reactions of PEO coating which would largely assist the surface incorporation of Co_(3)O_(4)into the coating.In contrast,the sealing in cold solutions led to less compact coatings,which was attributed to the fact the hydration reactions would be restricted at 60°C.A nearly fully sealed coating with a porosity of~0.5%was successfully formed on the sample immersed in the hot solution containing 1 gr of cobalt nitrate hexahydrate.Thus,the electrochemical stability of this fully sealed coating was superior to the other samples as it had the lowest corrosion current density(4.71×10^(-10)A·cm^(-2))and the highest outer layer resistance(3.81×10^(7)Ω·cm^(2)).The composite coatings developed in this study are ideal for applications requiring high electrochemical stability.
基金This paper is supported by Shanghai Science and Technology Development Fund,China,No.19DZ1205604.
文摘Reducing CO_(2) to produce methane through microbial electrolytic cell(MEC)is one of the important methods of CO_(2) resource utilization.In view of the problem of low methanogenesis rate and weak CO_(2) conversion rate in the reduction process,theflowfield environment of the cathode chamber is changed by changing the upper gas cir-culation rate and the lower liquid circulation rate of the cathode chamber to explore the impact on the reactor startup and operation and products.The results showed that under certain conditions,the CO_(2) consumption and methane production rate could be increased by changing the upper gas recirculation rate alone,but the increase effect was not obvious,but the by-product hydrogen production decreased significantly.Changing the lower liquid circulation rate alone can effectively promote the growth of biofilm,and change the properties of biofilm at the later stage of the experiment,with the peak current density increased by 16%;The methanogenic rate decreased from the peak value of 0.561 to 0.3 mmol/d,and the CO_(2) consumption did not change signifi-cantly,which indicated that CO_(2) was converted into other organic substances instead of methane.The data after coupling the upper gas circulation rate with the lower liquid circulation rate is similar to that of only changing the lower liquid circulation rate,but changing the upper gas circulation rate can alleviate the decline of methane pro-duction rate caused by the change of biofilm properties,which not only improves the current density,but also increases the methane production rate by 0.05 mmol/d in the stable period.This study can provide theoretical and technical support for the industrial application scenario offlowfield regulation intervention of microbial elec-trolytic cell methanogenesis.
文摘Plasma Electrolyte Oxidation(PEO)process has increasingly been employed to improve magnesium surface properties by fabrication of an MgO-based coating.Originating from conventional anodizing procedures,this high-voltage process produces an adhesive ceramic film on the surface.The present article provides a comprehensive review around mechanisms of PEO coatings fabrication and their different properties.Due to complexity of PEO coatings formation,a complete explanation regarding fabrication mechanisms of PEO coatings has not yet been proposed;however,the most important advancements in the field of fabrication mechanisms of PEO coatings were gathered in this work.Mechanisms of PEO coatings fabrication on magnesium were reviewed considering voltage–time plots,optical spectrometry,acoustic emission spectrometry and electronic properties of the ceramic film.Afterwards,the coatings properties,affecting parameters and improvement strategies were discussed.In addition,corrosion resistance of coatings,important factors in corrosion resistance and methods for corrosion resistance improvement were considered.Tribological properties(important factors and improvement methods)of coatings were also studied.Since magnesium and its alloys are broadly used in biological applications,the biological properties of PEO coatings,important factors in their biological performance and existing methods for improvement of coatings were explained.Addition of ceramic based nanoparticles and formation of nanocomposite coatings may considerably influence properties of plasma electrolyte oxidation coatings.Nanocomposite coatings properties and nanoparticles adsorption mechanisms were included in a separate sector.Another method to improve coatings properties is formation of hybrid coatings on PEO coatings which was discussed in the end.
文摘The plasma electrolytic oxidation(PEO)procedure is utilized in order to amend the surface properties of Mg and its alloys.This procedure creates a ceramic coating on the surface applying high-voltage.The presence of deep pores and porosities in the surface that affect the corrosion resistance of the coatings is one of the PEO procedure limitations.One of the useful methods to decrease porosities of coating and improve its final properties is changing electrolyte conditions based on the presence of micro-and nanoparticles.The present paper reviews the mechanisms of particle adsorption and composition in PEO thin films in addition to the effect of particle addition on the microstructure,composition and corrosion behavior of coatings that were applied on magnesium alloys.
基金supported by Natural Science and En-gineering Research Council of Canada(NSERC)grant.
文摘Plasma electrolytic oxidation(PEO),a promising surface treatment method to improve the corrosion and wear resistance of magnesium and its alloys,operates at high voltages,resulting in a relatively high energy cost.To make the PEO process more economically viable,its energy efficiency needs to be improved.This study investigates the growth behaviour and microstructural characteristics of low-energy PEO coatings on an AM50 magnesium alloy in a concentrated electrolyte containing sodium tetraborate.The surface morphology of the coatings was different from typical PEO coating morphologies and a large voltage oscillation was observed during treatment.Using different characterisation techniques,and based on a micro-discharge model,a correlation was made between the voltage-time behaviour,microdischarge characteristics and the composition and microstructure of the coated samples.The results suggest electrolyte chemistry can somewhat control discharge behaviour,which plays an important role in PEO coating growth.
基金The authors would like to thank ACTICOAT project in frame of Era.NET-Rus+Call,2017(Project N477)RFBR(Project No.18-53-76008)in the frame of project ACTICOAT(Era.Net RUS Plus Call 2017,Project 477)for the partial financial support of this work.MS,MZ and CB additionally appreciate European project FUNCOAT("Development and design of novel multiFUNctional PEO COATings"in frame of H2020-MSCA-RISE-2018 call,Grant Agreement No 823942)for the financial assistance.
文摘The growth kinetics of PEO coatings on AZ31 and AZ91 magnesium alloys were studied and correlated with their structure,compositions(phase and elemental)and corrosion resistance.It was established that the coatings have a two-(outer and anodic)or three-layer structure(outer,inner and anodic)depending on the treatment time.Briefly,at short treatment time only an anodic layer and outer layer exists.Growth of the outer PEO layer takes place due to the micro discharges,which occur in vertical pores and voids with spherical cross-section.If the time is increasing,and electrolyte inside of the pores is heating-up,etching of the Mg substrate and oxide film becomes more dominant and horizontal pores in the interface between coating and metal are formed.In the pores new anodic layer will form and at this time the formation of the third inner layer starts.The growth of the inner layer happens via the anodic film as a result of micro discharge ignition in the horizontal pores,accompanied by formation of plasma in numerous micro-voids of this layer.The coatings formed on AZ91 alloy are denser,than those on AZ31,which is related to the difference in the rates of inner layer growth and dissolving of oxides which are located at the bottom of the horizontal pores.Because of the lower Al content,the AZ31 substrate itself and the also the oxide films are less stable and tend to dissolve at a higher rate compared to AZ91.Thus,it was demonstrated that a good corrosion resistance of the coatings was only obtained on AZ91 and if the average thickness of the coating is around 50μm,correlating with the formation of a sufficiently dense inner laye-Knowing this mechanism,a new two-step treatment was suggested,combining the standard PEO treatment with a subsequent PEO process in an electrolyte supporting the inner film formation.The concept was successfully applied and a further improved corrosion resistance was obtained compared to the single stage PEO process.This improvement of corrosion resistance was related to the better sealing of porosity and formation of a denser inner layer.
基金supported by the National Key R&D Program of China(No.2018YFC0213405)。
文摘An environmentally friendly and resource-conserving route to the clean production of electrolytic manganese was developed,in which the electrolytic manganese residue(EMR)was initially calcined for cement buffering;then the generated SO2-containing flue gas was managed using manganese oxide ore and anolyte(MOOA)desulfurization;at last,the desulfurized slurry was introduced to the electrolytic manganese production(EMP).Results showed that 4.0 wt%coke addition reduced the sulfur of calcined EMR to 0.9%,thereby satisfying the cement-buffer requirement.Pilot-scale desulfurization showed that about 7.5 vol%of high SO2 containing flue gas can be cleaned to less than 0.1 vol%through a five-stage countercurrent MOOA desulfurization.The desulfurized slurry had 42.44 g·L-Mn2+and 1.92 g·L-1 S2 O62-,which was suitable for electrowinning after purification,and the purity of manganese product was 99.93%,satisfy the National Standard of China YB/T051-2015.This new integrated technology fulfilled 99.7%of sulfur reutilization from the EMR and 94.1%was effectively used to the EMP.The MOOA desulfurization linked the EMP a closed cycle without any pollutant discharge,which promoted the cleaner production of EMP industry.
基金The authors are grateful to the Department of Science&Technology of Gansu Province(China)for the support of the Creative Research Group Fund Grant(1111RJDA011)the Open Fund(SKLAB02015006)from State Key Laboratory of Advanced Processing and Recycling of Non-ferrous Metals(China).
文摘Plasma electrolytic oxidation(PEO)coatings were prepared on AZ91D magnesium alloys in alkaline silicate-based electrolyte with and without additives.The mutual effects among additives including TiC particles,dispersant polyethylene glycol 6000(PEG6000)and anionic surfactant sodium dodecyl sulfate(SDS)were studied based on orthogonal experiment.The content and distribution of TiC deposited in the coatings were measured by EPMA and EDS.The thicknesses,phase compositions,microstructures and corrosion resistances of the codlings were cAarnined by using TT260 eddy current tuickncss gage,XRD,SEM and clcctrochcniical test,respectively.The results show that the experiment design of this study is the key to study the mutual effects among these additives.Each additive and their interactions all remarkably influence TiC content and corrosion resistance of the coatings.Smaller size TiC is much easier to migrate towards the anode,and the interaction between PEG6000 and SDS both effectively prevents its agglomeration and increases the number of its negative surface charges,which further increase the migration rate and the deposited uniformity of TiC and make TiC have more opportunity to deposit in the discharge channel.Thus,when smaller size TiC,PEG6000 and SDS are all added into the electrolyte,they could improve the anti-corrosion property of the coating to the largest extent attributed to higher TiC content and the densest microstructure of the coating.
文摘Magnesium has been known as an appropriate biological material on account of its good biocompatibility and biodegradability properties in addition to advantageous mechanical properties.Mg and its alloys are of poor corrosion resistance.Its high corrosion rate leads to its quick decomposition in the corrosive ambiance and as a result weakening its mechanical properties and before it is repaired,it will vanish.The corrosion and degradation rate must be controlled in the body to advance the usage of Mg and its alloys as implants.Different techniques have been utilized to boost biological properties.Plasma electrolytic oxidation(PEO)can provide porous and biocompatible coatings for implants among various techniques.Biodegradable implants are generally supposed to show enough corrosion resistance and mechanical integrity in the body environment.Much research has been carried out in order to produce PEO coatings containing calcium phosphate compounds.Calcium phosphates are really similar to bone mineral composition and present great biocompatibility.The present study deals with the usage of calcium phosphates as biocompatible coatings applied on Mg and its alloys to study the properties and control the corrosion rate.
