In conformity with a fifth order RLC elliptic filter circuit prototype, it is easy to conceive the corresponding RC active filter circuit. Simple and feasible method presented here can be used to contrive...In conformity with a fifth order RLC elliptic filter circuit prototype, it is easy to conceive the corresponding RC active filter circuit. Simple and feasible method presented here can be used to contrive the equivalent switched capacitor filter circuit and switched current filter circuit. Consulting the technique data manual, we can expediently design a specific RLC filter. Therefore, it is of great convenience to design the switched current filter, which has the same performances. Such a kind of technology is useful in the domain of analogue sampled data signal processing.展开更多
In this paper the design and implementation of sixth-order lowpass elliptic switched-capacitor filter( SCF) for interface circuit of Micro-Electro-Mechanical System( MEMS) sensor are presented. This work aims to lower...In this paper the design and implementation of sixth-order lowpass elliptic switched-capacitor filter( SCF) for interface circuit of Micro-Electro-Mechanical System( MEMS) sensor are presented. This work aims to lower total harmonic distortion( THD) without deteriorating other performances. After system design in Simulink,the filter is realized in transistor level and finally fabricated in Central Semiconductor Manufacturing Corporation( CSMC) 0.5 μm metal-oxide-semiconductor( CMOS) technology. Typical measured results are: it operates with 25: 1 clock-to-corner frequency ratio and a 10 k Hz maximum corner frequency. The maximum passband ripple is about 0.49 d B and the minimum stopband rejection is 40 d B for the temperature from-20 ℃to 80 ℃. For the 250 k Hz clock frequency setting,given the 1 k Hz,- 8 d BVrms input signal,the measured worst case THD is-64 d B. The active area of the chip is 2.8 mm2 with 8 pads. The analog power dissipation is10 m W from a 5 V power supply.展开更多
We demonstrate a highly compact third-order elliptical micro-ring add-drop filter based on a silicon-on-insulator wafer. The elliptical micro-ring resonator has a major radius of 6μm （minor radius of 4.112μm） and ...We demonstrate a highly compact third-order elliptical micro-ring add-drop filter based on a silicon-on-insulator wafer. The elliptical micro-ring resonator has a major radius of 6μm （minor radius of 4.112μm） and a large free spectral range of 18 nm. Experimental results show a box-like channel dropping response, which has a 3 dB bandwidth of -2.7nm, high out-of-band signal rejection of around 40dB and a very low drop loss （〈0.5dB）. Simulation agrees well with the experiments. The footprint of the whole chip is only 0.0003mm2.展开更多
文摘In conformity with a fifth order RLC elliptic filter circuit prototype, it is easy to conceive the corresponding RC active filter circuit. Simple and feasible method presented here can be used to contrive the equivalent switched capacitor filter circuit and switched current filter circuit. Consulting the technique data manual, we can expediently design a specific RLC filter. Therefore, it is of great convenience to design the switched current filter, which has the same performances. Such a kind of technology is useful in the domain of analogue sampled data signal processing.
基金Sponsored by the Fundamental Research Funds for the Central Universities(Grant No.HIT.NSRIF.2013040)
文摘In this paper the design and implementation of sixth-order lowpass elliptic switched-capacitor filter( SCF) for interface circuit of Micro-Electro-Mechanical System( MEMS) sensor are presented. This work aims to lower total harmonic distortion( THD) without deteriorating other performances. After system design in Simulink,the filter is realized in transistor level and finally fabricated in Central Semiconductor Manufacturing Corporation( CSMC) 0.5 μm metal-oxide-semiconductor( CMOS) technology. Typical measured results are: it operates with 25: 1 clock-to-corner frequency ratio and a 10 k Hz maximum corner frequency. The maximum passband ripple is about 0.49 d B and the minimum stopband rejection is 40 d B for the temperature from-20 ℃to 80 ℃. For the 250 k Hz clock frequency setting,given the 1 k Hz,- 8 d BVrms input signal,the measured worst case THD is-64 d B. The active area of the chip is 2.8 mm2 with 8 pads. The analog power dissipation is10 m W from a 5 V power supply.
基金Supported by the National High Technology Research and Development Program of China under Grant No 2015AA016904the National Key Research and Development Plan of China under Grant No 2016YFB0402502the National Natural Science Foundation of China under Grant No 61275065
文摘We demonstrate a highly compact third-order elliptical micro-ring add-drop filter based on a silicon-on-insulator wafer. The elliptical micro-ring resonator has a major radius of 6μm （minor radius of 4.112μm） and a large free spectral range of 18 nm. Experimental results show a box-like channel dropping response, which has a 3 dB bandwidth of -2.7nm, high out-of-band signal rejection of around 40dB and a very low drop loss （〈0.5dB）. Simulation agrees well with the experiments. The footprint of the whole chip is only 0.0003mm2.
