In this paper,based on the generalized heat transfer law,an air conditioning system is analyzed with the entropy generation minimization and the entransy theory.Taking the coefficient of performance（denoted as COP） ...In this paper,based on the generalized heat transfer law,an air conditioning system is analyzed with the entropy generation minimization and the entransy theory.Taking the coefficient of performance（denoted as COP） and heat flow rate Qout which is released into the room as the optimization objectives,we discuss the applicabilities of the entropy generation minimization and entransy theory to the optimizations.Five numerical cases are presented.Combining the numerical results and theoretical analyses,we can conclude that the optimization applicabilities of the two theories are conditional.If Qout is the optimization objective,larger entransy increase rate always leads to larger Qout,while smaller entropy generation rate does not.If we take COP as the optimization objective,neither the entropy generation minimization nor the concept of entransy increase is always applicable.Furthermore,we find that the concept of entransy dissipation is not applicable for the discussed cases.展开更多
In this paper, we try to use the entransy theory to analyze the heat–work conversion systems with inner irreversible thermodynamic cycles. First, the inner irreversible thermodynamic cycles are analyzed. The influenc...In this paper, we try to use the entransy theory to analyze the heat–work conversion systems with inner irreversible thermodynamic cycles. First, the inner irreversible thermodynamic cycles are analyzed. The influences of different inner irreversible factors on entransy loss are discussed. We find that the concept of entransy loss can be used to analyze the inner irreversible thermodynamic cycles. Then, we analyze the common heat–work conversion systems with inner irreversible thermodynamic cycles. As an example, the heat–work conversion system in which the working fluid of the thermodynamic cycles is heated and cooled by streams is analyzed. Our analyses show that larger entransy loss leads to larger output work when the total heat flow from the high temperature heat source and the corresponding equivalent temperature are fixed.Some numerical cases are presented, and the results verify the theoretical analyses. On the other hand, it is also found that larger entransy loss does not always lead to larger output work when the preconditions are not satisfied.展开更多
The endoreversible Carnot cycle is analyzed based on the concepts of entropy generation, entropy generation number, entransy loss, and entransy loss coefficient. The relationships of the cycle output power and heat-wo...The endoreversible Carnot cycle is analyzed based on the concepts of entropy generation, entropy generation number, entransy loss, and entransy loss coefficient. The relationships of the cycle output power and heat-work conversion efficiency with these parameters are discussed. For the numerical examples discussed, the preconditions of the application for these concepts are derived. When the inlet temperatures and heat capacity flow rates of hot streams and environment temperature are prescribed, the results show that the concepts of entropy generation and entransy loss are applicable. However, in the presence of various inlet temperatures of streams, larger entransy loss rate still leads to larger output power, while smaller entropy generation rate does not. When the heat capacity flow rates of hot streams are various, neither larger entransy loss rate nor smaller entropy generation rate always leads to larger output power. Larger entransy loss coefficient always leads to larger heat-work conversion efficiency for the cases discussed, while smaller entropy generation number does not always.展开更多
The heat exchanger network(HEN) synthesis problem based on entransy theory is analyzed. According to the characteristics of entransy representation of thermal potential energy, the entransy dissipation represents the ...The heat exchanger network(HEN) synthesis problem based on entransy theory is analyzed. According to the characteristics of entransy representation of thermal potential energy, the entransy dissipation represents the irreversibility of the heat transfer process, the temperature difference determines the entransy dissipation, and four HEN design steps based on entransy theory are put forward. The present study shows how it is possible to set energy targets based on entransy and achieve them with a network of heat exchangers by an example of heat exchanger network design for four streams. In order to verify the correctness of the heat exchanger networks design method based on entransy theory, the synthesis of the HEN for the diesel hydrogenation unit is studied. Using the heat exchange networks design method based on entransy theory, the HEN obtained is consistent with energy targets. The entransy transfer efficiency of HEN based on entransy theory is 92.29%, higher than the entransy transfer efficiency of the maximum heat recovery network based on pinch technology.展开更多
In thermal radiation, taking heat flow as an extensive quantity and defining the potential as temperature T or the black body emissive power U will lead to two different definitions of radiation entransy flow and the ...In thermal radiation, taking heat flow as an extensive quantity and defining the potential as temperature T or the black body emissive power U will lead to two different definitions of radiation entransy flow and the corresponding principles for thermal radiation optimization. The two definitions of radiation entransy flow and the corresponding optimization prin ciples are compared in this paper. When the total heat flow is given, the optimization objectives of the extremum entransy dissipation principles （EEDPs） developed based on potentials T and U correspond to the minimum equivalent temperature difference and the minimum equivalent blackbody emissive power difference respectively. The physical meaning of the definition based on potential U is clearer than that based on potential T, but the latter one can be used for the coupled heat transfer optimization problem while the former one cannot. The extremum entropy generation principle （EEGP） for thermal radiation is also derived, which includes the minimum entropy generation principle for thermal radiation. When the radiation heat flow is prescribed, the EEGP reveals that the minimum entropy generation leads to the minimum equivalent thermodynamic potential difference, which is not the expected objective in heat transfer. Therefore, the minimum entropy generation is not always appropriate for thermal radiation optimization. Finally, three thermal radiation optimization examples are discussed, and the results show that the difference in optimization objective between the EEDPs and the EEGP leads to the difference between the optimization results. The EEDP based on potential T is more useful in practical application since its optimization objective is usually consistent with the expected one.展开更多
An exploration of the gas CO2 absorbed into liquid ethanol accompanied with Rayleigh convection is performed by analyzing the mass entransy dissipation;this new statistical quantity is introduced to describe the irrev...An exploration of the gas CO2 absorbed into liquid ethanol accompanied with Rayleigh convection is performed by analyzing the mass entransy dissipation;this new statistical quantity is introduced to describe the irreversibility of mass transfer potential capacity. Based on the general advection–diffusion differential equation for an unsteady mass transfer process, the variation of the included angle between the velocity vector and concentration gradient fields is investigated to reveal the underlying mechanism of interfacial convection enhancing mass transfer. Results show some identical characteristics with the qualitative analyses of the synergy effects generated by the concentration and velocity fields after interfacial convection occurring for a boundary condition of fixed surface concentration. And the equivalent mass resistance for convective mass transfer process presents the similar variation with the reciprocal of instantaneous mass transfer coefficient. Accordingly, it is reasonable to be seen that mass transfer dissipation rate could be provided to assess the convection strength and explain fundamentally how Rayleigh convection improves mass transfer performance through establishing a close relationship between the mass transfer capacity and field synergy principle from the view of mass transfer theory.展开更多
A T-Q diagram based on entransy theory is applied to graphically and quantitatively describe the irreversibility of the heat transfer processes.The hot and cold composite curves can be obtained in the T-Q diagram.The ...A T-Q diagram based on entransy theory is applied to graphically and quantitatively describe the irreversibility of the heat transfer processes.The hot and cold composite curves can be obtained in the T-Q diagram.The entransy recovery and entransy dissipation that are affected by temperature differences can be obtained through the shaded area under the composite curves.The method for setting the energy target of the HENs in T-Q diagram based on entransy theory is proposed.A case study of the diesel oil hydrogenation unit is used to illustrate the application of the method.The results show that three different heat transfer temperature differences is 10 K,15 K and 20 K,and the entransy recovery is 5.498×10~7k W·K,5.377×10~7k W·K,5.257×10~7k W·K,respectively.And the entransy transfer efficiency is 92.29%,91.63%,90.99%.Thus,the energy-saving potential of the HENs is obtained by setting the energy target based on the entransy transfer efficiency.展开更多
The entransy theory developed in recent years is used to optimize the aspect ratio of a plate fin in heat convection.Based on a two-dimensional model,the theoretical analysis shows that the minimum thermal resistance ...The entransy theory developed in recent years is used to optimize the aspect ratio of a plate fin in heat convection.Based on a two-dimensional model,the theoretical analysis shows that the minimum thermal resistance defined with the concept of entransy dissipation corresponds to the maximum heat transfer rate when the temperature of the heating surface is fixed.On the other hand,when the heat flux of the heating surface is fixed,the minimum thermal resistance corresponds to the minimum average temperature of the heating surface.The entropy optimization is also given for the heat transfer processes.It is observed that the minimum entropy generation,the minimum entropy generation number,and the minimum revised entropy generation number do not always correspond to the best heat transfer performance.In addition,the influence factors on the optimized aspect ratio of the plate fin are also discussed.The optimized ratio decreases with the enhancement of heat convection,while it increases with fin thermal conductivity increasing.展开更多
The spectral radiative entransy flux and the total radiative entransy flux are defined for the steady radiative heat transfer processes in enclosures composed of non-isothermal or non-grey, opaque, diffuse surfaces. B...The spectral radiative entransy flux and the total radiative entransy flux are defined for the steady radiative heat transfer processes in enclosures composed of non-isothermal or non-grey, opaque, diffuse surfaces. Based on the definitions, the radiative entransy flux balance equation and the radiative entransy dissipation functions are introduced under spectral and total wavelength condition. Furthermore, the minimum principle of radiative entransy loss, the extreme principle of radiative entransy dissipation and the minimum principle of radiative thermal resistance are developed. The minimum prirlciple of radiative en- transy loss shows that the potential and the net radiative heat flux distribution which meet the control equations and the boundary conditions would make the radiative entransy loss minimum if the net radiative heat flux or the potential distribution of the radiative heat transfer system is given. The extreme principle of radiative entransy dissipation indicates that the minimum radiative entransy dissipation leads to the minimum average potential difference for the prescribed total radiative heat exchange and the maximum radiative entransy dissipation leads to the maximum radiative heat exchange for the prescribed average potential difference. Moreover, the minimum principle of radiative thermal resistance tells us that the aforementioned extreme values of radiative entransy dissipation both correspond to the minimum value of radiative thermal resistance. Application examples are given for the extreme principle of spectral radiative entransy dissipation and the minimum principle of spectral radiative thermal resistance, and the principles are proved to be applicable.展开更多
The entransy theory has been applied to the analyses of heat-work conversion systems. The physical meaning and the applications of work entransy are analyzed and discussed in this paper. Work entransy, which is clarif...The entransy theory has been applied to the analyses of heat-work conversion systems. The physical meaning and the applications of work entransy are analyzed and discussed in this paper. Work entransy, which is clarified to be a process dependent quantity, is not the entransy of work, but the system entransy change accompanying work transfer. The relationship between the work entransy and the output work is set up. When the application preconditions are satisfied, larger work entransy leads to larger output work. Entransy loss, which was proposed and applied to heat work conversion processes with irreversible heat transfer, is the net entransy flow into the system and the summation of work entransy and entransy dissipation. The application preconditions of entransy loss are also discussed.展开更多
Analogizing with the heat conduction process, the entransy dissipation extremum principle for thermal insulation process can be described as: for a fixed boundary heat flux (heat loss) with certain constraints, the th...Analogizing with the heat conduction process, the entransy dissipation extremum principle for thermal insulation process can be described as: for a fixed boundary heat flux (heat loss) with certain constraints, the thermal insulation process is optimized when the entransy dissipation is maximized (maximum average temperature difference), while for a fixed boundary temperature, the thermal insulation process is optimized when the entransy dissipation is minimized (minimum average heat loss rate). Based on the constructal theory, the constructal optimizations of a single plane and cylindrical insulation layers as well as multi-layer insulation layers of the steel rolling reheating furnace walls are carried out for the fixed boundary temperatures and by taking the minimization of entransy dissipation rate as optimization objective. The optimal constructs of these three kinds of insulation structures with distributed thicknesses are obtained. The results show that compared with the insulation layers with uniform thicknesses and the optimal constructs of the insulation layers obtained by minimum heat loss rate, the optimal constructs of the insulation layers obtained by minimum entransy dissipation rate are obviously different from those of the former two insulation layers; the optimal constructs of the insulation layers obtained by minimum entransy dissipation rate can effectively reduce the average heat loss rates of the insulation layers, and can help to improve their global thermal insulation performances. The entransy dissipation extremum principle is applied to the constructal optimizations of insulation systems, which will help to extend the application range of the entransy dissipation extremum principle.展开更多
Based on constructal theory and entransy theory,the optimal designs of constant-and variable-cross-sectional cylindrical heat sources are carried out by taking dimensionless equivalent resistance minimization as optim...Based on constructal theory and entransy theory,the optimal designs of constant-and variable-cross-sectional cylindrical heat sources are carried out by taking dimensionless equivalent resistance minimization as optimization objective.The effects of the cylindrical height,the cylindrical shape and the ratio of thermal conductivity of the fin to that of the heat source are analyzed.The results show that when the volume of the heat source is fixed,there exists an optimal ratio of the center-to-centre distance of the fin and the heat source to the cylinder radius which leads to the minimum dimensionless equivalent thermal resistance.With the increase in the height of the cylindrical heat source and the ratio of thermal conductivity,the minimum dimensionless equivalent thermal resistance decreases gradually.For the heat source model with inverted variable-cross-sectional cylinder,there exist an optimal ratio of the center-to-centre distance of the fin and the heat source to the cylinder radius and an optimal radius ratio of the smaller and bigger circles of the cylindrical fin which lead to a double minimum dimensionless equivalent thermal resistance.Therefore,the heat transfer performance of the cylindrical heat source is improved by adopting the cylindrical model with variable-cross-section.The optimal constructs of the cylindrical heat source based on the minimizations of dimensionless maximum thermal resistance and dimensionless equivalent thermal resistance are different.When the thermal security is ensured,the optimal construct of the cylindrical heat source based on minimum equivalent thermal resistance can provide a new alternative scheme for the practical design of heat source.The results obtained herein enrich the work of constructal theory and entransy theory in the optimal design field of the heat sources,and they can provide some guidelines for the designs of practical heat source systems.展开更多
Steam generator is optimized by applying entransy dissipation extremum principle and constructal theory and adopting analyti-cal method.The obtained results show that the optimal spacing between adjacent tubes,the mas...Steam generator is optimized by applying entransy dissipation extremum principle and constructal theory and adopting analyti-cal method.The obtained results show that the optimal spacing between adjacent tubes,the mass flow rate of gas and the maximum entransy dissipation rate all depend on the dimensionless diameter of one tube,the dimensionless pressure difference number and the dimensionless length of flow channel of gas.Besides the three dimensionless groups,the optimal numbers of riser tubes and downcomer tubes and their summation all depend on the dimensionless height of one tube.The maximum entransy dissipation rate increases as the pressure difference that drives the gas flowing increases,and as the diameter of one tube and the length of flow channel both decrease.The mean heat flux in the heat transfer process of hot gas grows greatly,and the performance of the system is improved.Compared with the optimal construct with heat transfer rate maximization,the optimal construct with entransy dissipation rate maximization can improved the heat transfer effect of the steam generator more.展开更多
In the present work, water and olive oil are taken as working fluids to study the influence of viscous heating on the entransy dissipation caused by heat transfer in two-fluid heat exchangers. The results show that th...In the present work, water and olive oil are taken as working fluids to study the influence of viscous heating on the entransy dissipation caused by heat transfer in two-fluid heat exchangers. The results show that the influence of viscous heating on the entransy loss associated with heat transfer can not be neglected for the liquids having large dynamic viscosity. The viscous heating effect maintains the heat transfer ability of the working fluids, relatively reduces the entransy loss in heat exchangers; the viscous heating effect relatively augments the entropy generation due to heat transfer and the available energy destruction in heat exchangers. For the working fluid having large dynamic viscosity, the increasing rates of the entransy and entropy generation contributed by the viscous heating are even larger than those contributed by heat transfer, when the mass flow rate of working fluid reaches a certain value under the fixed heat transfer area condition. Thus, the entransy loss rate decreases and the growth rate of entropy generation increases as the mass flow rate of the working fluid increases. Under the same other conditions, the heat transfer entransy loss rate and entropy generation rate per unit heat transfer rate obtained when the fluid having a smaller heat capacity rate is cold fluid are less than those obtained when the fluid having a smaller heat capacity rate is hot fluid.展开更多
The concepts of entransy flux and entransy dissipation in radiative heat transfer were introduced based on the analogy with heat conduction and heat convection processes. Entransy will be partially dissipated during t...The concepts of entransy flux and entransy dissipation in radiative heat transfer were introduced based on the analogy with heat conduction and heat convection processes. Entransy will be partially dissipated during the radiative heat transfer processes due to the irreversibility. The extremum principle of entransy dissipation was developed for optimizing radiative heat transfer processes. This principle states that for a fixed boundary temperature the radiative heat transfer is optimized when the entransy dissipation is maximized, while for a fixed boundary heat flux the radiative heat transfer process is optimized when the entransy dissipation is minimized. Finally, examples for the application of the entransy dissipation extre- mum principle are presented.展开更多
In the present work,a principle of equipartition of entransy dissipation(EoED) for heat exchanger design is established,which says that for a heat exchanger design with given heat duty and heat transfer area,the total...In the present work,a principle of equipartition of entransy dissipation(EoED) for heat exchanger design is established,which says that for a heat exchanger design with given heat duty and heat transfer area,the total entransy dissipation rate reaches the minimum when the local entransy dissipation rate is uniformly distributed along the heat exchanger.When the heat transfer coefficient is unfixed,the total entransy dissipation obtained by the EoED principle is less than that obtained by the principle of equipartition of temperature difference(EoTD).Furthermore,the exchanger effectiveness obtained by the EoED principle is larger than that obtained by the EoTD principle.When the heat transfer coefficient is fixed,the EoED principle is equivalent to the EoTD principle.We show that the equipartition of entropy production(EoEP) and EoED principles give rise to difference in entropy generation and entransy dissipation for a heat exchanger optimization design.The discrepancies are caused by distinct features of entropy production minimization and entransy dissipation minimization principles,the former is to optimize the design of heat exchanger by making the lost available work minimum,while the latter is not involved with heat-work conversion.It is found that the entropy generation number is not suitable for evaluating heat exchanger performance,since it directly depends on the inlet and outlet temperatures of working fluids.On the contrary,the entransy dissipation number is not directly related to the inlet and outlet temperatures of working fluids.Therefore,the entransy dissipation number is more suitable for serving as a criterion to evaluate heat exchanger performance.展开更多
By taking equivalent thermal resistance, which reflects the average heat conduc- tion effect and is defined based on entransy dissipation, as optimization objective, the "volume to point" constructal problem...By taking equivalent thermal resistance, which reflects the average heat conduc- tion effect and is defined based on entransy dissipation, as optimization objective, the "volume to point" constructal problem of how to discharge the heat generated in a fixed volume to a heat sink on the border through relatively high conductive link is re-analyzed and re-optimized in this paper. The constructal shape of the control volume with the best average heat conduction effect is deduced. For the elemental area and the first order construct assembly, when the thermal current density in the high conductive link is linear with the length, the optimized shapes of assemble based on the minimization of entransy dissipation are the same as those based on minimization of maximum temperature difference, and the mean tem- perature difference is 2/3 of the maximum temperature difference. For the second and higher order construct assemblies, the thermal current densities in the high conductive link are not linear with the length, and the optimized shapes of assem- ble based on the minimization of entransy dissipation are different from those based on minimization of maximum temperature difference. For the same parame- ters, the constructs based on minimization of entransy dissipation and the con- structs based on minimization of maximum temperature difference are compared, and the results show that the constructs based on entransy dissipation can de- crease the mean temperature difference better than the constructs based on mini- mization of maximum temperature difference. But with the increase of the number of the order, the mean temperature difference does not always decrease, and there exist some fluctuations. Because the idea of entransy describes the heat transfer ability more suitably, all of the heat conduction constructal problems may be re-optimized based on it.展开更多
Using constructal entransy dissipation rate minimization method based on discrete variable cross-section conducting path,constructal optimizations of elemental area with variable cross-section conducting path are perf...Using constructal entransy dissipation rate minimization method based on discrete variable cross-section conducting path,constructal optimizations of elemental area with variable cross-section conducting path are performed,and the results are compared with the optimization results of elemental area with the constant cross-section conducting path.The comparison shows that the minimum mean temperature difference based on elemental area with variable cross-section conducting path increases and approaches a constant as the assembly's order increases,but the minimum mean temperature difference based on elemental area with constant cross-section conducting path decreases and approaches a constant as the assembly's order increases.The difference between them is caused by the different dimensionless mean temperature difference of the first order assembly.A universal constructal optimization method by self similar organization to improve heat transfer ability and its corresponding rule are proposed.With the constructal optimization method by self similar organization based on entransy dissipation rate minimization objective,the mean temperature difference approaches a constant as the assembly's order increases.展开更多
The liquid-solid phase change process of a simple one-dimensional slab is studied in this paper.By taking entransy dissipation minimization as optimization objective,the optimal external reservoir temperature profiles...The liquid-solid phase change process of a simple one-dimensional slab is studied in this paper.By taking entransy dissipation minimization as optimization objective,the optimal external reservoir temperature profiles are derived by using optimal control theory under the condition of a fixed freezing or melting time.The entransy dissipation corresponding to the optimal heat exchange strategies of minimum entransy dissipation is 8/9 of that corresponding to constant reservoir temperature operations,which is independent of all system parameters.The obtained results for entransy dissipation minimization are also compared with those obtained for the optimal heat exchange strategies of minimum entropy generation and constant reservoir temperature operations by numerical examples.The obtained results can provide some theoretical guidelines for the choice of optimal cooling or heating strategy in practical liquid-solid phase change processes.展开更多
The entransy dissipation extremum principle provides new warranty and criterion for optimization of heat transfer.For two cases(body with heat generation and body heated externally)of a solid conducting wall with an o...The entransy dissipation extremum principle provides new warranty and criterion for optimization of heat transfer.For two cases(body with heat generation and body heated externally)of a solid conducting wall with an open cavity,a dimensionless equivalent thermal resistance based on entransy dissipation definition was taken as the optimization objective to optimize the model constructal ge- ometry.Numerical results validated the necessity and feasibility of the presented method.Comparisons of the numerical results based on minimization of dimensionless maximum thermal resistance and minimization of dimensionless equivalent thermal resistance,respectively,showed that there was no obvious difference between the two results when the volume fractionΦoccupied by cavity was small, but the difference between the two results increased with the increases ofΦand the body aspect ratio H/L for any model.The optimal cavities for bodies heated externally were more slender than those for bodies with heat generation.Heat origin had obvious effect on the global performance of heat transfer. The entransy dissipation of body heated externally increased 2―3 times than that of body with heat generation,indicating that the global performance of heat transfer weakened.The method presented herein provides some guidelines for some relevant thermal design problems.展开更多
基金Project supported by the Youth Programs of Chongqing Three Gorges University,China(Grant No.13QN18)
文摘In this paper,based on the generalized heat transfer law,an air conditioning system is analyzed with the entropy generation minimization and the entransy theory.Taking the coefficient of performance（denoted as COP） and heat flow rate Qout which is released into the room as the optimization objectives,we discuss the applicabilities of the entropy generation minimization and entransy theory to the optimizations.Five numerical cases are presented.Combining the numerical results and theoretical analyses,we can conclude that the optimization applicabilities of the two theories are conditional.If Qout is the optimization objective,larger entransy increase rate always leads to larger Qout,while smaller entropy generation rate does not.If we take COP as the optimization objective,neither the entropy generation minimization nor the concept of entransy increase is always applicable.Furthermore,we find that the concept of entransy dissipation is not applicable for the discussed cases.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.51376101 and 51356001)
文摘In this paper, we try to use the entransy theory to analyze the heat–work conversion systems with inner irreversible thermodynamic cycles. First, the inner irreversible thermodynamic cycles are analyzed. The influences of different inner irreversible factors on entransy loss are discussed. We find that the concept of entransy loss can be used to analyze the inner irreversible thermodynamic cycles. Then, we analyze the common heat–work conversion systems with inner irreversible thermodynamic cycles. As an example, the heat–work conversion system in which the working fluid of the thermodynamic cycles is heated and cooled by streams is analyzed. Our analyses show that larger entransy loss leads to larger output work when the total heat flow from the high temperature heat source and the corresponding equivalent temperature are fixed.Some numerical cases are presented, and the results verify the theoretical analyses. On the other hand, it is also found that larger entransy loss does not always lead to larger output work when the preconditions are not satisfied.
基金Project supported by the National Natural Science Foundation of China(Grant No.51376101)the Initiative Scientific Research Program of Tsinghua University,China
文摘The endoreversible Carnot cycle is analyzed based on the concepts of entropy generation, entropy generation number, entransy loss, and entransy loss coefficient. The relationships of the cycle output power and heat-work conversion efficiency with these parameters are discussed. For the numerical examples discussed, the preconditions of the application for these concepts are derived. When the inlet temperatures and heat capacity flow rates of hot streams and environment temperature are prescribed, the results show that the concepts of entropy generation and entransy loss are applicable. However, in the presence of various inlet temperatures of streams, larger entransy loss rate still leads to larger output power, while smaller entropy generation rate does not. When the heat capacity flow rates of hot streams are various, neither larger entransy loss rate nor smaller entropy generation rate always leads to larger output power. Larger entransy loss coefficient always leads to larger heat-work conversion efficiency for the cases discussed, while smaller entropy generation number does not always.
基金Supported the National Natural Science Foundation of China(21406124)
文摘The heat exchanger network(HEN) synthesis problem based on entransy theory is analyzed. According to the characteristics of entransy representation of thermal potential energy, the entransy dissipation represents the irreversibility of the heat transfer process, the temperature difference determines the entransy dissipation, and four HEN design steps based on entransy theory are put forward. The present study shows how it is possible to set energy targets based on entransy and achieve them with a network of heat exchangers by an example of heat exchanger network design for four streams. In order to verify the correctness of the heat exchanger networks design method based on entransy theory, the synthesis of the HEN for the diesel hydrogenation unit is studied. Using the heat exchange networks design method based on entransy theory, the HEN obtained is consistent with energy targets. The entransy transfer efficiency of HEN based on entransy theory is 92.29%, higher than the entransy transfer efficiency of the maximum heat recovery network based on pinch technology.
基金supported by the Tsinghua University Initiative Scientific Research Programthe National Natural Science Foundation of China(GrantNo.51136001)
文摘In thermal radiation, taking heat flow as an extensive quantity and defining the potential as temperature T or the black body emissive power U will lead to two different definitions of radiation entransy flow and the corresponding principles for thermal radiation optimization. The two definitions of radiation entransy flow and the corresponding optimization prin ciples are compared in this paper. When the total heat flow is given, the optimization objectives of the extremum entransy dissipation principles （EEDPs） developed based on potentials T and U correspond to the minimum equivalent temperature difference and the minimum equivalent blackbody emissive power difference respectively. The physical meaning of the definition based on potential U is clearer than that based on potential T, but the latter one can be used for the coupled heat transfer optimization problem while the former one cannot. The extremum entropy generation principle （EEGP） for thermal radiation is also derived, which includes the minimum entropy generation principle for thermal radiation. When the radiation heat flow is prescribed, the EEGP reveals that the minimum entropy generation leads to the minimum equivalent thermodynamic potential difference, which is not the expected objective in heat transfer. Therefore, the minimum entropy generation is not always appropriate for thermal radiation optimization. Finally, three thermal radiation optimization examples are discussed, and the results show that the difference in optimization objective between the EEDPs and the EEGP leads to the difference between the optimization results. The EEDP based on potential T is more useful in practical application since its optimization objective is usually consistent with the expected one.
基金Supported by the National Key Technology Research and Development Program of the Ministry of Science and Technology of the People’s Republic of China(2007BAB24B05)
文摘An exploration of the gas CO2 absorbed into liquid ethanol accompanied with Rayleigh convection is performed by analyzing the mass entransy dissipation;this new statistical quantity is introduced to describe the irreversibility of mass transfer potential capacity. Based on the general advection–diffusion differential equation for an unsteady mass transfer process, the variation of the included angle between the velocity vector and concentration gradient fields is investigated to reveal the underlying mechanism of interfacial convection enhancing mass transfer. Results show some identical characteristics with the qualitative analyses of the synergy effects generated by the concentration and velocity fields after interfacial convection occurring for a boundary condition of fixed surface concentration. And the equivalent mass resistance for convective mass transfer process presents the similar variation with the reciprocal of instantaneous mass transfer coefficient. Accordingly, it is reasonable to be seen that mass transfer dissipation rate could be provided to assess the convection strength and explain fundamentally how Rayleigh convection improves mass transfer performance through establishing a close relationship between the mass transfer capacity and field synergy principle from the view of mass transfer theory.
基金Supported by the National Natural Science Foundation of China(21406124)
文摘A T-Q diagram based on entransy theory is applied to graphically and quantitatively describe the irreversibility of the heat transfer processes.The hot and cold composite curves can be obtained in the T-Q diagram.The entransy recovery and entransy dissipation that are affected by temperature differences can be obtained through the shaded area under the composite curves.The method for setting the energy target of the HENs in T-Q diagram based on entransy theory is proposed.A case study of the diesel oil hydrogenation unit is used to illustrate the application of the method.The results show that three different heat transfer temperature differences is 10 K,15 K and 20 K,and the entransy recovery is 5.498×10~7k W·K,5.377×10~7k W·K,5.257×10~7k W·K,respectively.And the entransy transfer efficiency is 92.29%,91.63%,90.99%.Thus,the energy-saving potential of the HENs is obtained by setting the energy target based on the entransy transfer efficiency.
基金Project supported by the National Natural Science Foundation of China (Grant No. 51106082)the Tsinghua University Initiative Scientific Research Program
文摘The entransy theory developed in recent years is used to optimize the aspect ratio of a plate fin in heat convection.Based on a two-dimensional model,the theoretical analysis shows that the minimum thermal resistance defined with the concept of entransy dissipation corresponds to the maximum heat transfer rate when the temperature of the heating surface is fixed.On the other hand,when the heat flux of the heating surface is fixed,the minimum thermal resistance corresponds to the minimum average temperature of the heating surface.The entropy optimization is also given for the heat transfer processes.It is observed that the minimum entropy generation,the minimum entropy generation number,and the minimum revised entropy generation number do not always correspond to the best heat transfer performance.In addition,the influence factors on the optimized aspect ratio of the plate fin are also discussed.The optimized ratio decreases with the enhancement of heat convection,while it increases with fin thermal conductivity increasing.
基金supported by Tsinghua University Initiative Scientific Research Program
文摘The spectral radiative entransy flux and the total radiative entransy flux are defined for the steady radiative heat transfer processes in enclosures composed of non-isothermal or non-grey, opaque, diffuse surfaces. Based on the definitions, the radiative entransy flux balance equation and the radiative entransy dissipation functions are introduced under spectral and total wavelength condition. Furthermore, the minimum principle of radiative entransy loss, the extreme principle of radiative entransy dissipation and the minimum principle of radiative thermal resistance are developed. The minimum prirlciple of radiative en- transy loss shows that the potential and the net radiative heat flux distribution which meet the control equations and the boundary conditions would make the radiative entransy loss minimum if the net radiative heat flux or the potential distribution of the radiative heat transfer system is given. The extreme principle of radiative entransy dissipation indicates that the minimum radiative entransy dissipation leads to the minimum average potential difference for the prescribed total radiative heat exchange and the maximum radiative entransy dissipation leads to the maximum radiative heat exchange for the prescribed average potential difference. Moreover, the minimum principle of radiative thermal resistance tells us that the aforementioned extreme values of radiative entransy dissipation both correspond to the minimum value of radiative thermal resistance. Application examples are given for the extreme principle of spectral radiative entransy dissipation and the minimum principle of spectral radiative thermal resistance, and the principles are proved to be applicable.
基金supported by the National Natural Science Foundation of China(Grant No.51376101)the Science Fund for Creative Research Groups(Grant No.51321002)
文摘The entransy theory has been applied to the analyses of heat-work conversion systems. The physical meaning and the applications of work entransy are analyzed and discussed in this paper. Work entransy, which is clarified to be a process dependent quantity, is not the entransy of work, but the system entransy change accompanying work transfer. The relationship between the work entransy and the output work is set up. When the application preconditions are satisfied, larger work entransy leads to larger output work. Entransy loss, which was proposed and applied to heat work conversion processes with irreversible heat transfer, is the net entransy flow into the system and the summation of work entransy and entransy dissipation. The application preconditions of entransy loss are also discussed.
基金supported by the National Key Basic Research and Development Program of China (‘973’ Program) (Grant No. 2012CB720405)the National Natural Science Foundation of China (Grant No. 51176203)the Natural Science Foundation for Youngsters of Naval University of Engineering (Grant No. HGDQNJJ11008)
文摘Analogizing with the heat conduction process, the entransy dissipation extremum principle for thermal insulation process can be described as: for a fixed boundary heat flux (heat loss) with certain constraints, the thermal insulation process is optimized when the entransy dissipation is maximized (maximum average temperature difference), while for a fixed boundary temperature, the thermal insulation process is optimized when the entransy dissipation is minimized (minimum average heat loss rate). Based on the constructal theory, the constructal optimizations of a single plane and cylindrical insulation layers as well as multi-layer insulation layers of the steel rolling reheating furnace walls are carried out for the fixed boundary temperatures and by taking the minimization of entransy dissipation rate as optimization objective. The optimal constructs of these three kinds of insulation structures with distributed thicknesses are obtained. The results show that compared with the insulation layers with uniform thicknesses and the optimal constructs of the insulation layers obtained by minimum heat loss rate, the optimal constructs of the insulation layers obtained by minimum entransy dissipation rate are obviously different from those of the former two insulation layers; the optimal constructs of the insulation layers obtained by minimum entransy dissipation rate can effectively reduce the average heat loss rates of the insulation layers, and can help to improve their global thermal insulation performances. The entransy dissipation extremum principle is applied to the constructal optimizations of insulation systems, which will help to extend the application range of the entransy dissipation extremum principle.
基金supported by the National Natural Science Foundation of China(Grant Nos.5120618451176203&51356001)
文摘Based on constructal theory and entransy theory,the optimal designs of constant-and variable-cross-sectional cylindrical heat sources are carried out by taking dimensionless equivalent resistance minimization as optimization objective.The effects of the cylindrical height,the cylindrical shape and the ratio of thermal conductivity of the fin to that of the heat source are analyzed.The results show that when the volume of the heat source is fixed,there exists an optimal ratio of the center-to-centre distance of the fin and the heat source to the cylinder radius which leads to the minimum dimensionless equivalent thermal resistance.With the increase in the height of the cylindrical heat source and the ratio of thermal conductivity,the minimum dimensionless equivalent thermal resistance decreases gradually.For the heat source model with inverted variable-cross-sectional cylinder,there exist an optimal ratio of the center-to-centre distance of the fin and the heat source to the cylinder radius and an optimal radius ratio of the smaller and bigger circles of the cylindrical fin which lead to a double minimum dimensionless equivalent thermal resistance.Therefore,the heat transfer performance of the cylindrical heat source is improved by adopting the cylindrical model with variable-cross-section.The optimal constructs of the cylindrical heat source based on the minimizations of dimensionless maximum thermal resistance and dimensionless equivalent thermal resistance are different.When the thermal security is ensured,the optimal construct of the cylindrical heat source based on minimum equivalent thermal resistance can provide a new alternative scheme for the practical design of heat source.The results obtained herein enrich the work of constructal theory and entransy theory in the optimal design field of the heat sources,and they can provide some guidelines for the designs of practical heat source systems.
基金supported by the National Natural Science Foundation of China (Grant No 10905093)the Program for New Century Excellent Talents in University of China (Grant No NCET-04-1006)the Foun-dation for the Author of National Excellent Doctoral Dissertation of China (Grant No 200136)
文摘Steam generator is optimized by applying entransy dissipation extremum principle and constructal theory and adopting analyti-cal method.The obtained results show that the optimal spacing between adjacent tubes,the mass flow rate of gas and the maximum entransy dissipation rate all depend on the dimensionless diameter of one tube,the dimensionless pressure difference number and the dimensionless length of flow channel of gas.Besides the three dimensionless groups,the optimal numbers of riser tubes and downcomer tubes and their summation all depend on the dimensionless height of one tube.The maximum entransy dissipation rate increases as the pressure difference that drives the gas flowing increases,and as the diameter of one tube and the length of flow channel both decrease.The mean heat flux in the heat transfer process of hot gas grows greatly,and the performance of the system is improved.Compared with the optimal construct with heat transfer rate maximization,the optimal construct with entransy dissipation rate maximization can improved the heat transfer effect of the steam generator more.
基金supported by the National Basic Research Program of China ("973" Program) (Grant No. 2007CB206900)
文摘In the present work, water and olive oil are taken as working fluids to study the influence of viscous heating on the entransy dissipation caused by heat transfer in two-fluid heat exchangers. The results show that the influence of viscous heating on the entransy loss associated with heat transfer can not be neglected for the liquids having large dynamic viscosity. The viscous heating effect maintains the heat transfer ability of the working fluids, relatively reduces the entransy loss in heat exchangers; the viscous heating effect relatively augments the entropy generation due to heat transfer and the available energy destruction in heat exchangers. For the working fluid having large dynamic viscosity, the increasing rates of the entransy and entropy generation contributed by the viscous heating are even larger than those contributed by heat transfer, when the mass flow rate of working fluid reaches a certain value under the fixed heat transfer area condition. Thus, the entransy loss rate decreases and the growth rate of entropy generation increases as the mass flow rate of the working fluid increases. Under the same other conditions, the heat transfer entransy loss rate and entropy generation rate per unit heat transfer rate obtained when the fluid having a smaller heat capacity rate is cold fluid are less than those obtained when the fluid having a smaller heat capacity rate is hot fluid.
基金Supported by the National Basic Research Program of China ("973" Project) (Grant No. 2007CB206901)
文摘The concepts of entransy flux and entransy dissipation in radiative heat transfer were introduced based on the analogy with heat conduction and heat convection processes. Entransy will be partially dissipated during the radiative heat transfer processes due to the irreversibility. The extremum principle of entransy dissipation was developed for optimizing radiative heat transfer processes. This principle states that for a fixed boundary temperature the radiative heat transfer is optimized when the entransy dissipation is maximized, while for a fixed boundary heat flux the radiative heat transfer process is optimized when the entransy dissipation is minimized. Finally, examples for the application of the entransy dissipation extre- mum principle are presented.
基金supported by the National Basic Research Program of China ("973" Program) (Grant No.2007CB206900)
文摘In the present work,a principle of equipartition of entransy dissipation(EoED) for heat exchanger design is established,which says that for a heat exchanger design with given heat duty and heat transfer area,the total entransy dissipation rate reaches the minimum when the local entransy dissipation rate is uniformly distributed along the heat exchanger.When the heat transfer coefficient is unfixed,the total entransy dissipation obtained by the EoED principle is less than that obtained by the principle of equipartition of temperature difference(EoTD).Furthermore,the exchanger effectiveness obtained by the EoED principle is larger than that obtained by the EoTD principle.When the heat transfer coefficient is fixed,the EoED principle is equivalent to the EoTD principle.We show that the equipartition of entropy production(EoEP) and EoED principles give rise to difference in entropy generation and entransy dissipation for a heat exchanger optimization design.The discrepancies are caused by distinct features of entropy production minimization and entransy dissipation minimization principles,the former is to optimize the design of heat exchanger by making the lost available work minimum,while the latter is not involved with heat-work conversion.It is found that the entropy generation number is not suitable for evaluating heat exchanger performance,since it directly depends on the inlet and outlet temperatures of working fluids.On the contrary,the entransy dissipation number is not directly related to the inlet and outlet temperatures of working fluids.Therefore,the entransy dissipation number is more suitable for serving as a criterion to evaluate heat exchanger performance.
基金Supported by the Program for New Century Excellent Talents in University of Chinathe Foundation for the Author of National Excellent Doctoral Dissertation of China (Grant No. 200136)
文摘By taking equivalent thermal resistance, which reflects the average heat conduc- tion effect and is defined based on entransy dissipation, as optimization objective, the "volume to point" constructal problem of how to discharge the heat generated in a fixed volume to a heat sink on the border through relatively high conductive link is re-analyzed and re-optimized in this paper. The constructal shape of the control volume with the best average heat conduction effect is deduced. For the elemental area and the first order construct assembly, when the thermal current density in the high conductive link is linear with the length, the optimized shapes of assemble based on the minimization of entransy dissipation are the same as those based on minimization of maximum temperature difference, and the mean tem- perature difference is 2/3 of the maximum temperature difference. For the second and higher order construct assemblies, the thermal current densities in the high conductive link are not linear with the length, and the optimized shapes of assem- ble based on the minimization of entransy dissipation are different from those based on minimization of maximum temperature difference. For the same parame- ters, the constructs based on minimization of entransy dissipation and the con- structs based on minimization of maximum temperature difference are compared, and the results show that the constructs based on entransy dissipation can de- crease the mean temperature difference better than the constructs based on mini- mization of maximum temperature difference. But with the increase of the number of the order, the mean temperature difference does not always decrease, and there exist some fluctuations. Because the idea of entransy describes the heat transfer ability more suitably, all of the heat conduction constructal problems may be re-optimized based on it.
基金supported by Program for New Century Excellent Talents in Universities of China and the Foundation for the Author of National Excellent Doctoral Dissertation of China (Grant No. 200136)
文摘Using constructal entransy dissipation rate minimization method based on discrete variable cross-section conducting path,constructal optimizations of elemental area with variable cross-section conducting path are performed,and the results are compared with the optimization results of elemental area with the constant cross-section conducting path.The comparison shows that the minimum mean temperature difference based on elemental area with variable cross-section conducting path increases and approaches a constant as the assembly's order increases,but the minimum mean temperature difference based on elemental area with constant cross-section conducting path decreases and approaches a constant as the assembly's order increases.The difference between them is caused by the different dimensionless mean temperature difference of the first order assembly.A universal constructal optimization method by self similar organization to improve heat transfer ability and its corresponding rule are proposed.With the constructal optimization method by self similar organization based on entransy dissipation rate minimization objective,the mean temperature difference approaches a constant as the assembly's order increases.
基金supported by the Program for New Century Excellent Talents in Universities of China (Grant No 20041006)the Foundation for the Authors of National Excellent Doctoral Dissertation of China (Grant No 200136)
文摘The liquid-solid phase change process of a simple one-dimensional slab is studied in this paper.By taking entransy dissipation minimization as optimization objective,the optimal external reservoir temperature profiles are derived by using optimal control theory under the condition of a fixed freezing or melting time.The entransy dissipation corresponding to the optimal heat exchange strategies of minimum entransy dissipation is 8/9 of that corresponding to constant reservoir temperature operations,which is independent of all system parameters.The obtained results for entransy dissipation minimization are also compared with those obtained for the optimal heat exchange strategies of minimum entropy generation and constant reservoir temperature operations by numerical examples.The obtained results can provide some theoretical guidelines for the choice of optimal cooling or heating strategy in practical liquid-solid phase change processes.
基金Supported by the Program for New Century Excellent Talents in Universities of China(Grant No.20041006)the Foundation for the Authors of National Excellent Doctoral Dissertation of China(Grant No.200136)
文摘The entransy dissipation extremum principle provides new warranty and criterion for optimization of heat transfer.For two cases(body with heat generation and body heated externally)of a solid conducting wall with an open cavity,a dimensionless equivalent thermal resistance based on entransy dissipation definition was taken as the optimization objective to optimize the model constructal ge- ometry.Numerical results validated the necessity and feasibility of the presented method.Comparisons of the numerical results based on minimization of dimensionless maximum thermal resistance and minimization of dimensionless equivalent thermal resistance,respectively,showed that there was no obvious difference between the two results when the volume fractionΦoccupied by cavity was small, but the difference between the two results increased with the increases ofΦand the body aspect ratio H/L for any model.The optimal cavities for bodies heated externally were more slender than those for bodies with heat generation.Heat origin had obvious effect on the global performance of heat transfer. The entransy dissipation of body heated externally increased 2―3 times than that of body with heat generation,indicating that the global performance of heat transfer weakened.The method presented herein provides some guidelines for some relevant thermal design problems.
