To screen patients with early cervical lesions by analyzing the infection of high-risk Human papillomavirus (HR-HPV). Research Methods: The cervical exfoliated cell specimens and their clinical data were collected. Th...To screen patients with early cervical lesions by analyzing the infection of high-risk Human papillomavirus (HR-HPV). Research Methods: The cervical exfoliated cell specimens and their clinical data were collected. The HPV infection types of the collected specimens were detected by fluorescence quantitative PCR, and the correlation between HPV infection and clinicopathological features was analyzed statistically. Results: 725 cases were HR-HPV positive from 2605 cases, including 15 high-risk types of HPV16, 18, 31, 33, 35, 39, 45, 51, 52, 53, 56, 58, 59, 66, 68. Different histological types ranged from NILM to HSIL, and the positive rate of HPV showed an increasing trend with the aggravation of cervical lesions. Conclusion: The positive rate of 15 high-risk HPV types in the collected specimens was 27.8%. Patients with early cervical lesions could be screened for 15 high-risk HPV infection types.展开更多
AIM: To investigate the effect of stem cells from human exfoliated deciduous teeth(SHED) transplanted for bone regeneration in the dog mandibular defect.METHODS: In this prospective comparative study, SHEDs had been i...AIM: To investigate the effect of stem cells from human exfoliated deciduous teeth(SHED) transplanted for bone regeneration in the dog mandibular defect.METHODS: In this prospective comparative study, SHEDs had been isolated 5 years ago from human exfoliated deciduous teeth. The undifferentiated stem cells were seeded into mandibular bone through-andthrough defects of 4 dogs. Similar defects in control group were filled with cell-free collagen scaffold. After 12 wk, biopsies were taken and morphometric analysis was performed. The percentage of new bone formation and foreign body reaction were measured in each case. The data were subject to statistical analysis using the Mann-Whitney U and Kruskalwalis statistical tests. Differences at P < 0.05 was considered as significant level.RESULTS: There were no significant differences between control and SHED-seeded groups in connective tissue(P = 0.248), woven bone(P = 0.248) and compact bone(P = 0.082). There were not any side effects in transplanted SHED group such as teratoma or malignancy and abnormalities in this period.CONCLUSION: SHEDs which had been isolated and characterized 5 years ago and stored with cryopreservation banking were capable of proliferation and osteogenesis after 5 years, and no immune response was observed after three months of seeded SHEDs.展开更多
BACKGROUND Autoimmune hepatitis is a serious autoimmune liver disease that threatens human health worldwide,which emphasizes the urgent need to identify novel treatments.Stem cells from human exfoliated deciduous teet...BACKGROUND Autoimmune hepatitis is a serious autoimmune liver disease that threatens human health worldwide,which emphasizes the urgent need to identify novel treatments.Stem cells from human exfoliated deciduous teeth(SHED),which are easy to obtain in a non-invasive manner,show pronounced proliferative and immunomodulatory capacities.AIM To investigate the protective effects of SHED on concanavalin A(ConA)-induced hepatitis in mice,and to elucidate the associated regulatory mechanisms.METHODS We used a ConA-induced acute hepatitis mouse model and an in vitro co-culture system to study the protective effects of SHED on ConA-induced autoimmune hepatitis,as well as the associated underlying mechanisms.RESULTS SHED infusion could prevent aberrant histopathological liver architecture caused by ConA-induced infiltration of CD3+,CD4+,tumor necrosis-alpha+,and interferon-gamma+inflammatory cells.Alanine aminotransferase and aspartate aminotransferase were significantly elevated in hepatitis mice.SHED infusion could therefore block ConA-induced alanine aminotransferase and aspartate aminotransferase elevations.Mechanistically,ConA upregulated tumor necrosisalpha and interferon-gamma expression,which was activated by the nuclear factor-kappa B pathway to induce hepatocyte apoptosis,resulting in acute liver injury.SHED administration protected hepatocytes from ConA-induced apoptosis.CONCLUSION SHED alleviates ConA-induced acute liver injury via inhibition of hepatocyte apoptosis mediated by the nuclear factor-kappa B pathway.Our findings could provide a potential treatment strategy for hepatitis.展开更多
Exfoliated graphite was prepared by chemical route and then further subjected to thermal oxidation and sonication for size reduction and increased interlayer spacing in natural flake graphite. Exfoliated graphite/ABS ...Exfoliated graphite was prepared by chemical route and then further subjected to thermal oxidation and sonication for size reduction and increased interlayer spacing in natural flake graphite. Exfoliated graphite/ABS composites were pre-pared with varying filler concentration by solution casting method. Exfoliated graphite and composites were character-ised by scanning electron microscopy and energy dispersive X-ray analysis, Fourier transform infrared spectroscopy and X-ray diffractometry techniques. After thermal exfoliation significant peak of graphite at 2? = 26.4? disappeared completely, confirming successful exfoliation of graphite. SEM images revealed homogeneous dispersion of exfoliated graphite in the matrix and EDAX confirmed successful reduction of graphite oxide.展开更多
In this study, high-density polyethylene (HDPE)/exfoliated graphite nanoplatelet (xGnP) composites reinforced with a 2 wt.% concentration of nano-magnesia (n-MgO) were fabricated using an injection moulding machine. T...In this study, high-density polyethylene (HDPE)/exfoliated graphite nanoplatelet (xGnP) composites reinforced with a 2 wt.% concentration of nano-magnesia (n-MgO) were fabricated using an injection moulding machine. The thermal properties and morphological structures of the composites were investigated. The XRD results showed the peaks of xGnP and n-MgO, where the intensity of the xGnP peaks became stronger with adding increasing amounts of xGnP into the polymermatrix. In terms of morphology, some agglomeration of particles was observed within the matrix, and the agglomeration decreased the thermal properties of the composites. The nanocomposites showed less thermal stability than the pristine polymer. The reduction in the onset temperature compared to that of neat HDPE was attributed to less adhesion between the fillers and the matrix. In addition, the crystallinity was reduced by the addition of fillers.展开更多
In the present investigation the possibility of using exfoliated graphite nanoplatelets (xGnP) as reinforcement in order to enhance the mechanical properties of Cu-based metal matrix composites is explored. Cu-based m...In the present investigation the possibility of using exfoliated graphite nanoplatelets (xGnP) as reinforcement in order to enhance the mechanical properties of Cu-based metal matrix composites is explored. Cu-based metal matrix composites reinforced with different amounts of xGnP were fabricated by powder metallurgy route. The microstructure, sliding wear behaviour and mechanical properties of the Cu-xGnP composites were investigated. xGnP has been synthesized from the graphite intercalation compounds (GIC) through rapid evaporation of the intercalant at an elevated temperature. The thermally exfoliated graphite was later sonicated for a period of 5 h in acetone in order to achieve further exfoliation. The xGnP synthesized was characterized using SEM, HRTEM, X-ray diffraction, Raman spectroscopy and Fourier transform infrared spectroscopy. The Cu and xGnP powder mixtures were consolidated under a load of 565 MPa followed by sintering at 850°C for 2 h in inert atmosphere. Cu-1, 2, 3 and 5 wt% xGnP composites were developed. Results of the wear test show that there is a significant improvement in the wear resistance of the composites up to addition of 2 wt% of xGnP. Hardness, tensile strength and strain at failure of the various Cu-xGnP composites also show improvement upto the addition of 2 wt% xGnP beyond which there is a decrease in these properties. The density of the composites decreases with the addition of higher wt% of xGnP although addition of higher wt% of xGnP leads to higher sinterability and densification of the composites, resulting in higher relative density values. The nature of fracture in the pure Cu as well as the various Cu-xGnP composites was found to be ductile. Nanoplatelets of graphite were found firmly embedded in the Cu matrix in case of Cu-xGnP composites containing low wt% of xGnP.展开更多
Functionalized exfoliated graphene oxide (EGO) for supercapacitor electrodes have been synthesized by simple chemical methods from the exfoliated graphite (EG) as precursor. Structural and morphological characterizati...Functionalized exfoliated graphene oxide (EGO) for supercapacitor electrodes have been synthesized by simple chemical methods from the exfoliated graphite (EG) as precursor. Structural and morphological characterizations of EGO have been carried out using X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM), FTIR and Raman spectroscopy. Electrochemical performance of these electrodes has been investigated using cyclic voltammetry, galvanostatic charge-discharge, and electrochemical impedance spectroscopy. The fabricated supercapacitor gave a specific capacitance of 146 Fg-1 and energy density of 20 Wh·kg-1 for a highly oxidized sample with more functional groups compared to pure, lower level oxidized and reduced samples. The single and multi layered graphene oxide sheets produced by this method have a lower degree of agglomeration. We found that the graphene oxide with functional oxygen groups of quinine type enhances the capacitance compared to other oxygen functional groups.展开更多
The commercial graphite(CG)is the conventional anode material for lithium ion batteries(LIBs)due to its low delithiation voltage plateau(below 0.5 V)and extraordinary durability.Nevertheless,the further promotion of e...The commercial graphite(CG)is the conventional anode material for lithium ion batteries(LIBs)due to its low delithiation voltage plateau(below 0.5 V)and extraordinary durability.Nevertheless,the further promotion of energy density of LIBs is restricted by the limited capacity below 0.5 V of CG.Here,based on the supercritical CO2 exfoliation technique,the production of multi-layered graphene(MLG)is achieved from the pilot scale production line.The great merit of the exfoliated MLG anode is that the voltage plateau below 0.5 V is broadened obviously as compared to those of natural graphite and CG.Additionally,no obvious lithium dendrites are observed for MLG during the lithiation process.The large delithiation capacity under the low voltage plateau of MLG is mainly benefited from the combination of Li intercalation and boundary storage mechanism,which is further confirmed by the density functional theory calculations.The LiFePO4/MLG full cell can afford the satisfactory electrochemical property with respect to the capacity,energy density and ultralong cycling stability(90%capacity retention after 500 cycles at 2 C),significantly better than that of LiFePO4/CG.Besides,this developed technique not only dedicates to producing the high-performance anode for LIBs but also opens a door for the mass production of MLG in the industrial scale.展开更多
Graphene Oxide/Multilayer-Graphene (GO-MG) flakes were obtained using an electrochemically exfoliated graphite (GR) electrode from secondary steel-making industry performed in a two-electrode system using tungsten as ...Graphene Oxide/Multilayer-Graphene (GO-MG) flakes were obtained using an electrochemically exfoliated graphite (GR) electrode from secondary steel-making industry performed in a two-electrode system using tungsten as the counter electrode and GR as the working electrode. The exfoliated GO-MG flakes were processed and incorporated in an elastomeric polyurethane (PU) matrix. The mechanical properties of the PU/GO-MG composites were evaluated and compared with equivalent composites made of PU/GR powder. From experimental data analysis it was concluded that GO-MG flakes were approximately composed of 67 wt% GO and 33 wt% MG. The number of layers in the graphene flakes was estimated to be between 2 and 5 sheets. PU showed a breaking stress of 570 kPa, while the PU/20wt% GR attained a maximum stress of 750 kPa as compared to PU/10wt% GO-MF composite exhibiting a breaking stress of 1060 kPa.展开更多
Two-dimensional(2D)nanomaterials,such as graphene,MoS_(2),and MAX,have attracted increasing research attention in recent years due to their unique structural and performance advantages.However,their complex production...Two-dimensional(2D)nanomaterials,such as graphene,MoS_(2),and MAX,have attracted increasing research attention in recent years due to their unique structural and performance advantages.However,their complex production processes and equipment requirements are significant issues affecting their widespread use.Here,with an exfoliation strategy using three-roll milling,we present a simple,cost-effective,and extensible method to produce multilayer graphene,BN,MoS_(2),and Ti_(3)AlC_(2) nanosheets.The roller and phenolic resin created three kinds of forces on the layered 2D materials,i.e.,shear forces,compressive forces,and adhesive forces,which exfoliated layered materials from their edges and surfaces into nanosheets.Subsequently,the exfoliated materials were ultrasonically washed with alcohol,treated with ultrasonic vibration,and centrifuged to obtain 2D nanomaterials.The easy operation and high yield are attractive for research based on the construction of high-performance 2D nanosheet-based devices at low cost.Herein,the obtained multilayer graphene and MoS_(2) nanosheets were used as anode materials of sodium/potassium-ion batteries,respectively,to test their electrochemical properties.Better performances are obtained compared with their primary bulk materials.展开更多
Thanks to tunable physical and chemical properties,two-dimensional(2D)materials have received intensive interest,endowing their excellent electrocatalytic performances for applications in energy conversion.However,the...Thanks to tunable physical and chemical properties,two-dimensional(2D)materials have received intensive interest,endowing their excellent electrocatalytic performances for applications in energy conversion.However,their catalytic activities are largely determined by poor adsorption energy and limited active edge sites.Herein,a one-step electrochemical exfoliation strategy was developed to fabricate 2D Ni-doped MoS_(2)nanosheets(Ni-EX-MoS_(2))with a lateral size of500 nm and thickness of3.5 nm.Profiting from high electrical conductivity and abundant exposing active sites,Ni-EX-MoS_(2)catalyst displayed an admirable performance for electrochemical hydrogen evolution reaction(HER)with a low overpotential of 145 m V at 10 m A/cm^(2)as well as a small Tafel slope of 89 m V/dec in alkaline media,which are superior to those of the most reported MoS_(2)-based electrocatalysts.The formed Ni species with tuning electronic structure played a crucial role as primary active center of Ni-EX-MoS_(2),as well as the forming stable 1T/2H phase MoS_(2)interface demonstrated a synergistic effect on electrocatalytic HER performance.Further,Ni-EX-MoS_(2)was employed as a cathode electrode for alkaline Zn-H_(2)O battery,which displayed a high power density of 3.3 m W/cm^(2)with excellent stability.This work will provide a simple and effective guideline for design of electrochemically exfoliated transition metal-doped MoS_(2)nanosheets to inspire their practical applications in energy catalytic and storage.展开更多
Graphene materials have drawn tremendous attention in recent years.The formation of holes and pores on graphene sheets can provide transfer channels and facilitate the ion/electron transport kinetics.In this study,gra...Graphene materials have drawn tremendous attention in recent years.The formation of holes and pores on graphene sheets can provide transfer channels and facilitate the ion/electron transport kinetics.In this study,graphene nanosheets were prepared electrochemically,and then,they were used as the starting material for the preparation of holey graphene(HG)through the KOH activation process.The weight ratio of initial electrochemically exfoliated graphene(EEG)to KOH was optimized according to the morphological features,BET surface area examination,graphene number of layers calculated from XRD patterns,and the ID/IG ratio obtained from Raman analysis.Results showed that increasing the KOH amount led to the achievement of higher values of ID/IG and surface area and less re-stacking of graphene sheets which occurs because of the heat treatment process.The environmental burdens of the production routes for the preparation of EEG and HG were investigated by cradle-to-gate life cycle assessment(LCA).The LCA results of EEG production indicated that electricity with the contributions of 94%,91%,82%,and 75%of the total impact in four environmental categories,including fossil fuel depletion,ozone depletion,global warming,and smog was the main environmental weakness.In the pore generation process,KOH was recognized as the biggest contributor(about 51%to 83%of the total impact)in six impact categories,including ozone depletion,non-carcinogenics,smog,global warming,carcinogenics,and eutrophication which could be attributed to its high consumption amount(21.9 kg).This work offers environmental considerations for the development of sustainable graphene materials.展开更多
The poor crystallinity and unstable crystal structure of tungsten disulfide(WS2)limit its application in practice.In this paper,a molten salt electrolysis method is proposed to intercalate metal ions into the interlay...The poor crystallinity and unstable crystal structure of tungsten disulfide(WS2)limit its application in practice.In this paper,a molten salt electrolysis method is proposed to intercalate metal ions into the interlayers of layered WS2 to obtain few-layer sheetlike structures.The effect of the molten salt system,applied constant current and electrolysis duration on the exfoliation degree of WS2 bulk has been investigated.The results show that the products electrolyzed in molten LiCl-NaCl-KCl and NaClKCl salts under 25 mA were more transparent and thinner flakes sheets due to the uniform intercalation of Li^+and Na^+with smaller size.The exfoliated WS_(2)was used as an anode material for sodium-ion batteries with a potential of 0.01-2.50 V.In comparison,the WS_(2)-NaCl-25 mA electrode displays a high reversible capacity of 373 mAh·g^(-1)at0.1 A·g^(-1)after cycling for 100 cycles at the same time showing great rate and cycle performance.It also presents a high capacitive ratio of 90.65%at 1.0 mV·s^(-1).The molten salt electrolysis provides a new perspective on the exfoliation of layered material,while demonstrating the great potential of WS2 as an anode material for sodium-ion battery.展开更多
Micro-supercapacitors(MSCs)show great potential as on-chip energy storage devices for portable electronics.The major flaw of thin-film MSCs is their low energy density.To improve the energy density,thicker electrodes ...Micro-supercapacitors(MSCs)show great potential as on-chip energy storage devices for portable electronics.The major flaw of thin-film MSCs is their low energy density.To improve the energy density,thicker electrodes are required.However,the fabrication of MSCs with thick electrodes remains a challenge.In this work,a novel 3D printing method is employed to fabricate high-performance MSCs with interdigitated exfoliated graphene(EG)/carbon nanotube(CNT)/silver nanowire(Ag NW)electrodes.The nanowelding of Ag NW junction plays a critical role in the realization of 3D printing.To enhance the electrochemical performances of EG,phosphorus atoms are incorporated into the carbon framework with 1.7 at%.The areal capacitance of the 3D printed MSC is 21.6 mF cm^(-2)at a scan rate of 0.01 V s^(-1).The areal energy density of the MSC ranges from 0.5 to 2μWh cm^(-2)with a maximum power density of 2.5 mW cm^(-2).展开更多
Due to its unique physical,chemical and surface electronic properties,molybdenum disulfide(MoS_(2))nanosheets open up a new avenue for nitrogen dioxide(NO2)detection at room temperature.Nevertheless,the gas sensing pr...Due to its unique physical,chemical and surface electronic properties,molybdenum disulfide(MoS_(2))nanosheets open up a new avenue for nitrogen dioxide(NO2)detection at room temperature.Nevertheless,the gas sensing properties of pure MoS_(2) nanosheets are inevitably degenerated by the adsorption of atmospheric oxygen,which results in weak stability for MoS_(2)-based gas sensors.Reducing surface defects and constructing heterojunctions may be effective strategies to improve the gas sensing properties of MoS_(2) nanosheets.In this work,we design a novel nanocomposite based on MoS_(2) nanosheets decorated with tin disulfide(SnS_(2))nanoparticles(MoS_(2)/SnS_(2))via combining the mechanical exfoliation method with the facile hydrothermal method.The experimental results indicate that,after surfaces decoration with SnS_(2) nanoparticles,the as-prepared gas sensor based on MoS_(2)/SnS_(2) nanocomposites exhibits reliable long-term stability with the maximum response value drift of less than 3%at room temperature.Moreover,the MoS_(2)/SnS_(2) sensor also possesses desirable gas sensing properties upon NO_(2) at room temperature,such as high sensitivity,rapid response/recovery speed(28 s/3 s,5×10^(-6) NO_(2)),satisfactory selectivity,favorable repeatability and reversibility.The improved gas sensing properties of MoS_(2)/SnS_(2) nanocomposites can be attributed to the unique electronic properties of MoS 2 nanosheets with the fewer layers structure and the competitive adsorption effect of SnS_(2) nanoparticles.This work elucidates that SnS_(2) nanoparticles serving as an effective antioxidative decoration can promote the stability of MoS_(2) nanosheets,providing a promising approach to achieve high-stability NO2 gas sensors at room temperature.展开更多
MoS2,acting as a promising gas sensing material,has shown huge potential in monitoring of toxic and harmful gases at room temperature.However,MoS2-based gas sensors still suffer from poor gas sensing performance such ...MoS2,acting as a promising gas sensing material,has shown huge potential in monitoring of toxic and harmful gases at room temperature.However,MoS2-based gas sensors still suffer from poor gas sensing performance such as poor sensitivity,long response time.Constructing the hete ro structure is an effective approach to improve gas-sensing performance of MoS2.Herein,PbS@MoS2 composites synthesized by mechanical exfoliation combining with wet-chemical precipitation are used to investigate its performance in detecting NO2 at room temperature.The response value of PbS@MoS2 gas sensor against NO2 is significantly improved compared with the pure MoS2 gas sensor.At the same time,the modification with PbS also accelerates the response speed of MoS2,and the response time is almost reduced by two orders of magnitude,from hundreds of seconds to less than ten seconds.The enhanced response value and fast response time are mainly benefited from the modulation effect of NO2 to PbS@MoS2 heterostructure and the mechanically exfoliated MoS2 surface with few defects.This work can be expected to provide useful guidance for designing composite materials with excellent gas sensing properties.展开更多
Liquid-phase exfoliation was employed to synthesize Sr_(2)Nb_(3)O_(10) perovskite nanosheets with thicknesses down to 1.76 nm.Transmission electron microscopy(TEM),atomic force microscope(AFM),X-ray photoelectron spec...Liquid-phase exfoliation was employed to synthesize Sr_(2)Nb_(3)O_(10) perovskite nanosheets with thicknesses down to 1.76 nm.Transmission electron microscopy(TEM),atomic force microscope(AFM),X-ray photoelectron spectrometer(XPS),and other characterization techniques were used to evaluate the atomic structure and chemical composition of the exfoliated nanosheets.A UV photodetector based on individual Sr_(2)Nb_(3)O_(10) nanosheets was prepared to demonstrate the application of an ultraviolet(UV) photodetector.The UV photodetector exhibited outstanding photocurrent and responsivity with a responsivity of 3×10^(5) A·W^(-1) at 5 V bias under 280 nm illumination,a photocurrent of 60 nA,and an on/off ratio of 3×10^(2).展开更多
High elastic energy density and high-efficiency ionic electromechanical actuators were prepared from aligned activated microwave exfoliated graphite oxide(A-aMEGO)/polymer nano-composites,and the electromechanical per...High elastic energy density and high-efficiency ionic electromechanical actuators were prepared from aligned activated microwave exfoliated graphite oxide(A-aMEGO)/polymer nano-composites,and the electromechanical performance was characterized.The elastic modulus and elastic energy density of the ionic actuators can be tuned over a wide range by varying the polymer(poly(vinylidene fluoride/chlorotrifluoroethylene)[P(VDF-CTFE)])concentration in the nano-composite actuators.The A-aMEGO/P(VDF-CTFE)nano-composite actuators with 35 wt.%of polymer content exhibit an elastic energy density higher than 5 J/cm^(3) and an electromechanical conversion efficiency higher than 3.5%,induced under 4 V.The results show the promise of high-density highly aligned graphene electrodes for high-performance ionic electromechanical transduction devices.展开更多
Exfoliated graphite(EG)is promising oil sorbent as well as an intermediate product for the preparation of flexible graphite films(FGFs).It has been a critical challenge to energy conservation and pollution abatement f...Exfoliated graphite(EG)is promising oil sorbent as well as an intermediate product for the preparation of flexible graphite films(FGFs).It has been a critical challenge to energy conservation and pollution abatement for the traditional EG production technique.Here,we propose a simple and effective preparation method to acquire EG in which flake graphite is intercalated and exfoliated at room temperature,not involving any pollutant emission.The influence factors in the preparation process were explored,such as the amount of H_(2)SO_(4)and H_(2)O_(2),the temperature for the preparation of room temperature exfoliated graphite(RTEG).In contrast to the EG by high temperature exfoliation(HTEG),RTEG exhibits a homogeneous structure and a significantly increased volume and surface area.Moreover,EG blocks with high oil sorption capacity and excellent reuse performance can be obtained by RTEG method.Especially,FGFs fabricated by RTEG has high flexibility,thermal conductivity and electrical conductivity.It suggests that this environment-friendly technology is suitable for large-scale industrial implementation of graphite-based oil sorbents and flexible materials.展开更多
Mg–Al–Fe layered double hydroxides(LDHs) were exfoliated and incorporated in polyether sulfone membranes for the removal of phosphate and fluoride for the first time. The exfoliation methods, coagulation bath, LDH a...Mg–Al–Fe layered double hydroxides(LDHs) were exfoliated and incorporated in polyether sulfone membranes for the removal of phosphate and fluoride for the first time. The exfoliation methods, coagulation bath, LDH amount, interfering ions, adsorption isotherm,desorption and reuse of the membranes were investigated. It was found that LDHs could be quickly exfoliated in formamide/N,N-dimethylformamide(DMF) solvent mixtures with sodium carboxymethyl cellulose as a stabilizer. The membranes displayed much higher adsorption capacity for phosphate(5.61 mg/g) and faster adsorption rate than the unexfoliated materials. With increased DMF content in the coagulation bath, the static and dynamic adsorption capacity rose. Interference from Cl-and SO_4^(2-)(50 mg/L) on adsorption of phosphates was not apparent. The membranes displayed excellent reusability in dynamic adsorption/desorption. The membranes also showed high adsorption capacity for fluorides(1.61 mg/g).展开更多
文摘To screen patients with early cervical lesions by analyzing the infection of high-risk Human papillomavirus (HR-HPV). Research Methods: The cervical exfoliated cell specimens and their clinical data were collected. The HPV infection types of the collected specimens were detected by fluorescence quantitative PCR, and the correlation between HPV infection and clinicopathological features was analyzed statistically. Results: 725 cases were HR-HPV positive from 2605 cases, including 15 high-risk types of HPV16, 18, 31, 33, 35, 39, 45, 51, 52, 53, 56, 58, 59, 66, 68. Different histological types ranged from NILM to HSIL, and the positive rate of HPV showed an increasing trend with the aggravation of cervical lesions. Conclusion: The positive rate of 15 high-risk HPV types in the collected specimens was 27.8%. Patients with early cervical lesions could be screened for 15 high-risk HPV infection types.
文摘AIM: To investigate the effect of stem cells from human exfoliated deciduous teeth(SHED) transplanted for bone regeneration in the dog mandibular defect.METHODS: In this prospective comparative study, SHEDs had been isolated 5 years ago from human exfoliated deciduous teeth. The undifferentiated stem cells were seeded into mandibular bone through-andthrough defects of 4 dogs. Similar defects in control group were filled with cell-free collagen scaffold. After 12 wk, biopsies were taken and morphometric analysis was performed. The percentage of new bone formation and foreign body reaction were measured in each case. The data were subject to statistical analysis using the Mann-Whitney U and Kruskalwalis statistical tests. Differences at P < 0.05 was considered as significant level.RESULTS: There were no significant differences between control and SHED-seeded groups in connective tissue(P = 0.248), woven bone(P = 0.248) and compact bone(P = 0.082). There were not any side effects in transplanted SHED group such as teratoma or malignancy and abnormalities in this period.CONCLUSION: SHEDs which had been isolated and characterized 5 years ago and stored with cryopreservation banking were capable of proliferation and osteogenesis after 5 years, and no immune response was observed after three months of seeded SHEDs.
基金Supported by The National Natural Science Foundation of China,No.81970940 and No.81600865Beijing Natural Science Foundation,No.7182182and the National Science and Technology Major Project of the Ministry of Science and Technology of China,No.2018ZX10302207.
文摘BACKGROUND Autoimmune hepatitis is a serious autoimmune liver disease that threatens human health worldwide,which emphasizes the urgent need to identify novel treatments.Stem cells from human exfoliated deciduous teeth(SHED),which are easy to obtain in a non-invasive manner,show pronounced proliferative and immunomodulatory capacities.AIM To investigate the protective effects of SHED on concanavalin A(ConA)-induced hepatitis in mice,and to elucidate the associated regulatory mechanisms.METHODS We used a ConA-induced acute hepatitis mouse model and an in vitro co-culture system to study the protective effects of SHED on ConA-induced autoimmune hepatitis,as well as the associated underlying mechanisms.RESULTS SHED infusion could prevent aberrant histopathological liver architecture caused by ConA-induced infiltration of CD3+,CD4+,tumor necrosis-alpha+,and interferon-gamma+inflammatory cells.Alanine aminotransferase and aspartate aminotransferase were significantly elevated in hepatitis mice.SHED infusion could therefore block ConA-induced alanine aminotransferase and aspartate aminotransferase elevations.Mechanistically,ConA upregulated tumor necrosisalpha and interferon-gamma expression,which was activated by the nuclear factor-kappa B pathway to induce hepatocyte apoptosis,resulting in acute liver injury.SHED administration protected hepatocytes from ConA-induced apoptosis.CONCLUSION SHED alleviates ConA-induced acute liver injury via inhibition of hepatocyte apoptosis mediated by the nuclear factor-kappa B pathway.Our findings could provide a potential treatment strategy for hepatitis.
文摘Exfoliated graphite was prepared by chemical route and then further subjected to thermal oxidation and sonication for size reduction and increased interlayer spacing in natural flake graphite. Exfoliated graphite/ABS composites were pre-pared with varying filler concentration by solution casting method. Exfoliated graphite and composites were character-ised by scanning electron microscopy and energy dispersive X-ray analysis, Fourier transform infrared spectroscopy and X-ray diffractometry techniques. After thermal exfoliation significant peak of graphite at 2? = 26.4? disappeared completely, confirming successful exfoliation of graphite. SEM images revealed homogeneous dispersion of exfoliated graphite in the matrix and EDAX confirmed successful reduction of graphite oxide.
文摘In this study, high-density polyethylene (HDPE)/exfoliated graphite nanoplatelet (xGnP) composites reinforced with a 2 wt.% concentration of nano-magnesia (n-MgO) were fabricated using an injection moulding machine. The thermal properties and morphological structures of the composites were investigated. The XRD results showed the peaks of xGnP and n-MgO, where the intensity of the xGnP peaks became stronger with adding increasing amounts of xGnP into the polymermatrix. In terms of morphology, some agglomeration of particles was observed within the matrix, and the agglomeration decreased the thermal properties of the composites. The nanocomposites showed less thermal stability than the pristine polymer. The reduction in the onset temperature compared to that of neat HDPE was attributed to less adhesion between the fillers and the matrix. In addition, the crystallinity was reduced by the addition of fillers.
文摘In the present investigation the possibility of using exfoliated graphite nanoplatelets (xGnP) as reinforcement in order to enhance the mechanical properties of Cu-based metal matrix composites is explored. Cu-based metal matrix composites reinforced with different amounts of xGnP were fabricated by powder metallurgy route. The microstructure, sliding wear behaviour and mechanical properties of the Cu-xGnP composites were investigated. xGnP has been synthesized from the graphite intercalation compounds (GIC) through rapid evaporation of the intercalant at an elevated temperature. The thermally exfoliated graphite was later sonicated for a period of 5 h in acetone in order to achieve further exfoliation. The xGnP synthesized was characterized using SEM, HRTEM, X-ray diffraction, Raman spectroscopy and Fourier transform infrared spectroscopy. The Cu and xGnP powder mixtures were consolidated under a load of 565 MPa followed by sintering at 850°C for 2 h in inert atmosphere. Cu-1, 2, 3 and 5 wt% xGnP composites were developed. Results of the wear test show that there is a significant improvement in the wear resistance of the composites up to addition of 2 wt% of xGnP. Hardness, tensile strength and strain at failure of the various Cu-xGnP composites also show improvement upto the addition of 2 wt% xGnP beyond which there is a decrease in these properties. The density of the composites decreases with the addition of higher wt% of xGnP although addition of higher wt% of xGnP leads to higher sinterability and densification of the composites, resulting in higher relative density values. The nature of fracture in the pure Cu as well as the various Cu-xGnP composites was found to be ductile. Nanoplatelets of graphite were found firmly embedded in the Cu matrix in case of Cu-xGnP composites containing low wt% of xGnP.
文摘Functionalized exfoliated graphene oxide (EGO) for supercapacitor electrodes have been synthesized by simple chemical methods from the exfoliated graphite (EG) as precursor. Structural and morphological characterizations of EGO have been carried out using X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM), FTIR and Raman spectroscopy. Electrochemical performance of these electrodes has been investigated using cyclic voltammetry, galvanostatic charge-discharge, and electrochemical impedance spectroscopy. The fabricated supercapacitor gave a specific capacitance of 146 Fg-1 and energy density of 20 Wh·kg-1 for a highly oxidized sample with more functional groups compared to pure, lower level oxidized and reduced samples. The single and multi layered graphene oxide sheets produced by this method have a lower degree of agglomeration. We found that the graphene oxide with functional oxygen groups of quinine type enhances the capacitance compared to other oxygen functional groups.
基金supported by the National Natural Science Foundation of China(Nos.21706283 and 21776308)Beijing Talents Foundation(No.2017000020124G010)+1 种基金Science Foundation of China University of Petroleum,Beijing(No.2462017YJRC003)the Joint Open Fund of Jiangsu Collaborative Innovation Center for Ecological Building Material and Environmental Protection Equipment and Key Laboratory for Advanced Technology in Environmental Protection of Jiangsu Province(No.JH201812)。
文摘The commercial graphite(CG)is the conventional anode material for lithium ion batteries(LIBs)due to its low delithiation voltage plateau(below 0.5 V)and extraordinary durability.Nevertheless,the further promotion of energy density of LIBs is restricted by the limited capacity below 0.5 V of CG.Here,based on the supercritical CO2 exfoliation technique,the production of multi-layered graphene(MLG)is achieved from the pilot scale production line.The great merit of the exfoliated MLG anode is that the voltage plateau below 0.5 V is broadened obviously as compared to those of natural graphite and CG.Additionally,no obvious lithium dendrites are observed for MLG during the lithiation process.The large delithiation capacity under the low voltage plateau of MLG is mainly benefited from the combination of Li intercalation and boundary storage mechanism,which is further confirmed by the density functional theory calculations.The LiFePO4/MLG full cell can afford the satisfactory electrochemical property with respect to the capacity,energy density and ultralong cycling stability(90%capacity retention after 500 cycles at 2 C),significantly better than that of LiFePO4/CG.Besides,this developed technique not only dedicates to producing the high-performance anode for LIBs but also opens a door for the mass production of MLG in the industrial scale.
文摘Graphene Oxide/Multilayer-Graphene (GO-MG) flakes were obtained using an electrochemically exfoliated graphite (GR) electrode from secondary steel-making industry performed in a two-electrode system using tungsten as the counter electrode and GR as the working electrode. The exfoliated GO-MG flakes were processed and incorporated in an elastomeric polyurethane (PU) matrix. The mechanical properties of the PU/GO-MG composites were evaluated and compared with equivalent composites made of PU/GR powder. From experimental data analysis it was concluded that GO-MG flakes were approximately composed of 67 wt% GO and 33 wt% MG. The number of layers in the graphene flakes was estimated to be between 2 and 5 sheets. PU showed a breaking stress of 570 kPa, while the PU/20wt% GR attained a maximum stress of 750 kPa as compared to PU/10wt% GO-MF composite exhibiting a breaking stress of 1060 kPa.
基金supported by the National Natural Science Foundation of China(Grant Nos.52272063 and 22262024)Key Research and Development Program of Jiangxi Province(Grant No.20203BBE53066)+1 种基金Natural Science Foundation of Jiangxi Province(Grant No.20224BAB214037)Graduate Innovation Special Fund of Nanchang Hangkong University(Grant No.YC_(2)023-S683).
文摘Two-dimensional(2D)nanomaterials,such as graphene,MoS_(2),and MAX,have attracted increasing research attention in recent years due to their unique structural and performance advantages.However,their complex production processes and equipment requirements are significant issues affecting their widespread use.Here,with an exfoliation strategy using three-roll milling,we present a simple,cost-effective,and extensible method to produce multilayer graphene,BN,MoS_(2),and Ti_(3)AlC_(2) nanosheets.The roller and phenolic resin created three kinds of forces on the layered 2D materials,i.e.,shear forces,compressive forces,and adhesive forces,which exfoliated layered materials from their edges and surfaces into nanosheets.Subsequently,the exfoliated materials were ultrasonically washed with alcohol,treated with ultrasonic vibration,and centrifuged to obtain 2D nanomaterials.The easy operation and high yield are attractive for research based on the construction of high-performance 2D nanosheet-based devices at low cost.Herein,the obtained multilayer graphene and MoS_(2) nanosheets were used as anode materials of sodium/potassium-ion batteries,respectively,to test their electrochemical properties.Better performances are obtained compared with their primary bulk materials.
基金financially supported by the National Natural Science Foundation of China(Nos.21805244,51776188)the financial support from National Natural Science Foundation of China(Nos.21922811,21878270,21961160742)+1 种基金the Zhejiang Provincial Natural Science Foundation of China(No.LR19B060002)the Startup Foundation for HundredTalent Program of Zhejiang University,Jiangxi Province"Double Thousand Plan"Project(No.205201000020)。
文摘Thanks to tunable physical and chemical properties,two-dimensional(2D)materials have received intensive interest,endowing their excellent electrocatalytic performances for applications in energy conversion.However,their catalytic activities are largely determined by poor adsorption energy and limited active edge sites.Herein,a one-step electrochemical exfoliation strategy was developed to fabricate 2D Ni-doped MoS_(2)nanosheets(Ni-EX-MoS_(2))with a lateral size of500 nm and thickness of3.5 nm.Profiting from high electrical conductivity and abundant exposing active sites,Ni-EX-MoS_(2)catalyst displayed an admirable performance for electrochemical hydrogen evolution reaction(HER)with a low overpotential of 145 m V at 10 m A/cm^(2)as well as a small Tafel slope of 89 m V/dec in alkaline media,which are superior to those of the most reported MoS_(2)-based electrocatalysts.The formed Ni species with tuning electronic structure played a crucial role as primary active center of Ni-EX-MoS_(2),as well as the forming stable 1T/2H phase MoS_(2)interface demonstrated a synergistic effect on electrocatalytic HER performance.Further,Ni-EX-MoS_(2)was employed as a cathode electrode for alkaline Zn-H_(2)O battery,which displayed a high power density of 3.3 m W/cm^(2)with excellent stability.This work will provide a simple and effective guideline for design of electrochemically exfoliated transition metal-doped MoS_(2)nanosheets to inspire their practical applications in energy catalytic and storage.
文摘Graphene materials have drawn tremendous attention in recent years.The formation of holes and pores on graphene sheets can provide transfer channels and facilitate the ion/electron transport kinetics.In this study,graphene nanosheets were prepared electrochemically,and then,they were used as the starting material for the preparation of holey graphene(HG)through the KOH activation process.The weight ratio of initial electrochemically exfoliated graphene(EEG)to KOH was optimized according to the morphological features,BET surface area examination,graphene number of layers calculated from XRD patterns,and the ID/IG ratio obtained from Raman analysis.Results showed that increasing the KOH amount led to the achievement of higher values of ID/IG and surface area and less re-stacking of graphene sheets which occurs because of the heat treatment process.The environmental burdens of the production routes for the preparation of EEG and HG were investigated by cradle-to-gate life cycle assessment(LCA).The LCA results of EEG production indicated that electricity with the contributions of 94%,91%,82%,and 75%of the total impact in four environmental categories,including fossil fuel depletion,ozone depletion,global warming,and smog was the main environmental weakness.In the pore generation process,KOH was recognized as the biggest contributor(about 51%to 83%of the total impact)in six impact categories,including ozone depletion,non-carcinogenics,smog,global warming,carcinogenics,and eutrophication which could be attributed to its high consumption amount(21.9 kg).This work offers environmental considerations for the development of sustainable graphene materials.
基金financially supported by the Fundamental Research Funds for the Central Universities(Nos.N2025034 and N2025035)Xingliao Project(No.XLYC1807042)the Program of the Ministry of Education of China for Introducing Talents of Discipline to Universities(No.B16009)。
文摘The poor crystallinity and unstable crystal structure of tungsten disulfide(WS2)limit its application in practice.In this paper,a molten salt electrolysis method is proposed to intercalate metal ions into the interlayers of layered WS2 to obtain few-layer sheetlike structures.The effect of the molten salt system,applied constant current and electrolysis duration on the exfoliation degree of WS2 bulk has been investigated.The results show that the products electrolyzed in molten LiCl-NaCl-KCl and NaClKCl salts under 25 mA were more transparent and thinner flakes sheets due to the uniform intercalation of Li^+and Na^+with smaller size.The exfoliated WS_(2)was used as an anode material for sodium-ion batteries with a potential of 0.01-2.50 V.In comparison,the WS_(2)-NaCl-25 mA electrode displays a high reversible capacity of 373 mAh·g^(-1)at0.1 A·g^(-1)after cycling for 100 cycles at the same time showing great rate and cycle performance.It also presents a high capacitive ratio of 90.65%at 1.0 mV·s^(-1).The molten salt electrolysis provides a new perspective on the exfoliation of layered material,while demonstrating the great potential of WS2 as an anode material for sodium-ion battery.
基金supported by the National Natural Science Foundation of China(Grant Nos.51925704,51877214,51607187,and 51907203)the Hubei Provincial Natural Science Foundation of China(Grant Nos.2019CFB371,and 2019CFB373)the Special Financial Aid to China Postdoctoral Science Foundation(Grant No.2019T120972)。
文摘Micro-supercapacitors(MSCs)show great potential as on-chip energy storage devices for portable electronics.The major flaw of thin-film MSCs is their low energy density.To improve the energy density,thicker electrodes are required.However,the fabrication of MSCs with thick electrodes remains a challenge.In this work,a novel 3D printing method is employed to fabricate high-performance MSCs with interdigitated exfoliated graphene(EG)/carbon nanotube(CNT)/silver nanowire(Ag NW)electrodes.The nanowelding of Ag NW junction plays a critical role in the realization of 3D printing.To enhance the electrochemical performances of EG,phosphorus atoms are incorporated into the carbon framework with 1.7 at%.The areal capacitance of the 3D printed MSC is 21.6 mF cm^(-2)at a scan rate of 0.01 V s^(-1).The areal energy density of the MSC ranges from 0.5 to 2μWh cm^(-2)with a maximum power density of 2.5 mW cm^(-2).
基金financially supported by Hunan Provincial Natural Science Foundation of China(No.2018JJ2404)the Scientific Research Foundation of Hunan Provincial Education Department(Nos.19A475 and 19C1739)Hunan Science and Technology Plan Program(No.2019RS1056)。
文摘Due to its unique physical,chemical and surface electronic properties,molybdenum disulfide(MoS_(2))nanosheets open up a new avenue for nitrogen dioxide(NO2)detection at room temperature.Nevertheless,the gas sensing properties of pure MoS_(2) nanosheets are inevitably degenerated by the adsorption of atmospheric oxygen,which results in weak stability for MoS_(2)-based gas sensors.Reducing surface defects and constructing heterojunctions may be effective strategies to improve the gas sensing properties of MoS_(2) nanosheets.In this work,we design a novel nanocomposite based on MoS_(2) nanosheets decorated with tin disulfide(SnS_(2))nanoparticles(MoS_(2)/SnS_(2))via combining the mechanical exfoliation method with the facile hydrothermal method.The experimental results indicate that,after surfaces decoration with SnS_(2) nanoparticles,the as-prepared gas sensor based on MoS_(2)/SnS_(2) nanocomposites exhibits reliable long-term stability with the maximum response value drift of less than 3%at room temperature.Moreover,the MoS_(2)/SnS_(2) sensor also possesses desirable gas sensing properties upon NO_(2) at room temperature,such as high sensitivity,rapid response/recovery speed(28 s/3 s,5×10^(-6) NO_(2)),satisfactory selectivity,favorable repeatability and reversibility.The improved gas sensing properties of MoS_(2)/SnS_(2) nanocomposites can be attributed to the unique electronic properties of MoS 2 nanosheets with the fewer layers structure and the competitive adsorption effect of SnS_(2) nanoparticles.This work elucidates that SnS_(2) nanoparticles serving as an effective antioxidative decoration can promote the stability of MoS_(2) nanosheets,providing a promising approach to achieve high-stability NO2 gas sensors at room temperature.
基金supported by Hunan Provincial Natural Science Foundation of China(No.2018JJ2404)Scientific Research Foundation of Hunan Provincial Education Department(Nos.19A475,19C1739)Hunan Science and Technology Plan Program(No.2019RS1056)。
文摘MoS2,acting as a promising gas sensing material,has shown huge potential in monitoring of toxic and harmful gases at room temperature.However,MoS2-based gas sensors still suffer from poor gas sensing performance such as poor sensitivity,long response time.Constructing the hete ro structure is an effective approach to improve gas-sensing performance of MoS2.Herein,PbS@MoS2 composites synthesized by mechanical exfoliation combining with wet-chemical precipitation are used to investigate its performance in detecting NO2 at room temperature.The response value of PbS@MoS2 gas sensor against NO2 is significantly improved compared with the pure MoS2 gas sensor.At the same time,the modification with PbS also accelerates the response speed of MoS2,and the response time is almost reduced by two orders of magnitude,from hundreds of seconds to less than ten seconds.The enhanced response value and fast response time are mainly benefited from the modulation effect of NO2 to PbS@MoS2 heterostructure and the mechanically exfoliated MoS2 surface with few defects.This work can be expected to provide useful guidance for designing composite materials with excellent gas sensing properties.
基金Funded by the National Natural Science Foundation of China(Nos.51872214 and 52172124)the Fundamental Research Funds for the Central Universities(WUT:2021Ⅲ019JC and 2018Ⅲ041GX)。
文摘Liquid-phase exfoliation was employed to synthesize Sr_(2)Nb_(3)O_(10) perovskite nanosheets with thicknesses down to 1.76 nm.Transmission electron microscopy(TEM),atomic force microscope(AFM),X-ray photoelectron spectrometer(XPS),and other characterization techniques were used to evaluate the atomic structure and chemical composition of the exfoliated nanosheets.A UV photodetector based on individual Sr_(2)Nb_(3)O_(10) nanosheets was prepared to demonstrate the application of an ultraviolet(UV) photodetector.The UV photodetector exhibited outstanding photocurrent and responsivity with a responsivity of 3×10^(5) A·W^(-1) at 5 V bias under 280 nm illumination,a photocurrent of 60 nA,and an on/off ratio of 3×10^(2).
基金supported by NSF under grant number CMMI-1130437 and by a grant from Korean Institute of Science and Technology。
文摘High elastic energy density and high-efficiency ionic electromechanical actuators were prepared from aligned activated microwave exfoliated graphite oxide(A-aMEGO)/polymer nano-composites,and the electromechanical performance was characterized.The elastic modulus and elastic energy density of the ionic actuators can be tuned over a wide range by varying the polymer(poly(vinylidene fluoride/chlorotrifluoroethylene)[P(VDF-CTFE)])concentration in the nano-composite actuators.The A-aMEGO/P(VDF-CTFE)nano-composite actuators with 35 wt.%of polymer content exhibit an elastic energy density higher than 5 J/cm^(3) and an electromechanical conversion efficiency higher than 3.5%,induced under 4 V.The results show the promise of high-density highly aligned graphene electrodes for high-performance ionic electromechanical transduction devices.
文摘Exfoliated graphite(EG)is promising oil sorbent as well as an intermediate product for the preparation of flexible graphite films(FGFs).It has been a critical challenge to energy conservation and pollution abatement for the traditional EG production technique.Here,we propose a simple and effective preparation method to acquire EG in which flake graphite is intercalated and exfoliated at room temperature,not involving any pollutant emission.The influence factors in the preparation process were explored,such as the amount of H_(2)SO_(4)and H_(2)O_(2),the temperature for the preparation of room temperature exfoliated graphite(RTEG).In contrast to the EG by high temperature exfoliation(HTEG),RTEG exhibits a homogeneous structure and a significantly increased volume and surface area.Moreover,EG blocks with high oil sorption capacity and excellent reuse performance can be obtained by RTEG method.Especially,FGFs fabricated by RTEG has high flexibility,thermal conductivity and electrical conductivity.It suggests that this environment-friendly technology is suitable for large-scale industrial implementation of graphite-based oil sorbents and flexible materials.
基金supported by the National Natural Science Foundation of China and Qinghai Qaidam Saline Lake Chemical Science Research Joint Fund (No. U1607109)
文摘Mg–Al–Fe layered double hydroxides(LDHs) were exfoliated and incorporated in polyether sulfone membranes for the removal of phosphate and fluoride for the first time. The exfoliation methods, coagulation bath, LDH amount, interfering ions, adsorption isotherm,desorption and reuse of the membranes were investigated. It was found that LDHs could be quickly exfoliated in formamide/N,N-dimethylformamide(DMF) solvent mixtures with sodium carboxymethyl cellulose as a stabilizer. The membranes displayed much higher adsorption capacity for phosphate(5.61 mg/g) and faster adsorption rate than the unexfoliated materials. With increased DMF content in the coagulation bath, the static and dynamic adsorption capacity rose. Interference from Cl-and SO_4^(2-)(50 mg/L) on adsorption of phosphates was not apparent. The membranes displayed excellent reusability in dynamic adsorption/desorption. The membranes also showed high adsorption capacity for fluorides(1.61 mg/g).
