The parameter of filling expanding ratio n, plasticity factor k1 and deformation parameter k2 is raised, and then the elasto-plasticity critical corrosive ratio model for RC structure corrosive expanding crack based o...The parameter of filling expanding ratio n, plasticity factor k1 and deformation parameter k2 is raised, and then the elasto-plasticity critical corrosive ratio model for RC structure corrosive expanding crack based on elasto-plasticity theory is constructed in this paper. The influences of parameters such as filling expansion ratio n, plasticity factor kl, deformation parameter k2, Poisson ratio of concrete v, diameter of reinforced bar d and protective layer thickness c on the critical corrosive ratio are researched by theory analysis and experiments. The experimental results validate the accuracy of the model. According to the experimental study, the least squares solution is calculated as n = 1.8 ,k1 =0.61 ,k2 =0.5.展开更多
A new severe plastic deformation method for manufacturing tubes made of AZ31 magnesium alloy with a large diameter was developed,which is called the TCESE(tube continuous extrusion−shear−expanding)process.The process ...A new severe plastic deformation method for manufacturing tubes made of AZ31 magnesium alloy with a large diameter was developed,which is called the TCESE(tube continuous extrusion−shear−expanding)process.The process combines direct extrusion with a two-step shear−expanding process.The influences of expanding ratios,extrusion temperatures on the deformation of finite element meshes,strain evolution and flow velocity of tube blanks during the TCESE process were researched based on numerical simulations by using DEFORM-3D software.Simulation results show that the maximum expanding ratio is 3.0 in the TCESE process.The deformation of finite element meshes of tube blanks is inhomogeneous in the shear−expanding zone,and the equivalent strains increase significantly during the TCESE process of the AZ31 magnesium alloy.A extrusion temperature of 380°C and expanding ratio of 2.0 were selected as the optimized process parameters from the numerical simulation results.The average grain size of tubes fabricated by the TCESE process is approximately 10μm.The TCESE process can refine grains of magnesium alloy tubes with the occurrence of dynamic recrystallization.The(0001)basal texture intensities of the magnesium alloy tube blanks decrease due to continuous plastic deformation during the TCESE process.The average hardness of the extruded tubes is approximately HV 75,which is obviously improved.展开更多
基金Supported by the Foundation of Hubei Provincial Depart-ment of Education (Q200614002)Chenguang Program of Wuhan City (20055003059-29)
文摘The parameter of filling expanding ratio n, plasticity factor k1 and deformation parameter k2 is raised, and then the elasto-plasticity critical corrosive ratio model for RC structure corrosive expanding crack based on elasto-plasticity theory is constructed in this paper. The influences of parameters such as filling expansion ratio n, plasticity factor kl, deformation parameter k2, Poisson ratio of concrete v, diameter of reinforced bar d and protective layer thickness c on the critical corrosive ratio are researched by theory analysis and experiments. The experimental results validate the accuracy of the model. According to the experimental study, the least squares solution is calculated as n = 1.8 ,k1 =0.61 ,k2 =0.5.
基金financially supported by the National Natural Science Foundation of China (Nos.52071042,51771038)the Chongqing Talent Plan,China (No.CQYC202003047)Chongqing Natural Science Foundation,China (Nos.cstc2018jcyj AX0249,cstc2018jcyj AX0653)。
文摘A new severe plastic deformation method for manufacturing tubes made of AZ31 magnesium alloy with a large diameter was developed,which is called the TCESE(tube continuous extrusion−shear−expanding)process.The process combines direct extrusion with a two-step shear−expanding process.The influences of expanding ratios,extrusion temperatures on the deformation of finite element meshes,strain evolution and flow velocity of tube blanks during the TCESE process were researched based on numerical simulations by using DEFORM-3D software.Simulation results show that the maximum expanding ratio is 3.0 in the TCESE process.The deformation of finite element meshes of tube blanks is inhomogeneous in the shear−expanding zone,and the equivalent strains increase significantly during the TCESE process of the AZ31 magnesium alloy.A extrusion temperature of 380°C and expanding ratio of 2.0 were selected as the optimized process parameters from the numerical simulation results.The average grain size of tubes fabricated by the TCESE process is approximately 10μm.The TCESE process can refine grains of magnesium alloy tubes with the occurrence of dynamic recrystallization.The(0001)basal texture intensities of the magnesium alloy tube blanks decrease due to continuous plastic deformation during the TCESE process.The average hardness of the extruded tubes is approximately HV 75,which is obviously improved.
