In view of the current sensors failure in electric pitch system,a variable universe fuzzy fault tolerant control method of electric pitch control system based on single current detection is proposed.When there is sing...In view of the current sensors failure in electric pitch system,a variable universe fuzzy fault tolerant control method of electric pitch control system based on single current detection is proposed.When there is single or two-current sensor fault occurs,based on the proposed method the missing current information can be reconstructed by using direct current（DC）bus current sensor and the three-phase current can be updated in time within any two adjacent sampling periods,so as to ensure stability of the closed-loop system.And then the switchover and fault tolerant control of fault current sensor would be accomplished by fault diagnosis method based on adaptive threshold judgment.For the reconstructed signal error caused by the modulation method and the main control target of electric pitch system,a variable universe fuzzy control method is used in the speed loop,which can improve the anti-disturbance ability to load variation,and the robustness of fault tolerance system.The results show that the fault tolerant control method makes the variable pitch control system still has ideal control characteristics in case of sensor failure although part of the system performance is lost,thus the correctness of the proposed method is verified.展开更多
In this paper, a data-based fault tolerant control(FTC) scheme is investigated for unknown continuous-time(CT)affine nonlinear systems with actuator faults. First, a neural network(NN) identifier based on particle swa...In this paper, a data-based fault tolerant control(FTC) scheme is investigated for unknown continuous-time(CT)affine nonlinear systems with actuator faults. First, a neural network(NN) identifier based on particle swarm optimization(PSO) is constructed to model the unknown system dynamics. By utilizing the estimated system states, the particle swarm optimized critic neural network(PSOCNN) is employed to solve the Hamilton-Jacobi-Bellman equation(HJBE) more efficiently.Then, a data-based FTC scheme, which consists of the NN identifier and the fault compensator, is proposed to achieve actuator fault tolerance. The stability of the closed-loop system under actuator faults is guaranteed by the Lyapunov stability theorem. Finally, simulations are provided to demonstrate the effectiveness of the developed method.展开更多
Based on a nonlinear state predictor (NSP) and a strong tracking filter (STF), a sensor fault tolerant generic model control (FTGMC) approach for a class of nonlinear time-delay processes is proposed. First, the NSP i...Based on a nonlinear state predictor (NSP) and a strong tracking filter (STF), a sensor fault tolerant generic model control (FTGMC) approach for a class of nonlinear time-delay processes is proposed. First, the NSP is introduced, and it is used to extend the conventional generic model control (GMC) to nonlinear processes with large input time-delay. Then the STF is adopted to estimate process states and sensor bias, the estimated sensor bias is used to drive a fault detection logic. When a sensor fault is detected, the estimated process states by the STF will be used to construct the process output to form a 'soft sensor', which is then used by the NSP (instead of the real outputs) to provide state predictors. These procedures constitute an active fault tolerant control scheme. Finally, simulation results of a three-tank-system demonstrate the effectiveness of the proposed approach.展开更多
A new fault tolerant control（FTC） via a controller reconfiguration approach for general stochastic nonlinear systems is studied.Different from the formulation of classical FTC methods,it is supposed that the measure...A new fault tolerant control（FTC） via a controller reconfiguration approach for general stochastic nonlinear systems is studied.Different from the formulation of classical FTC methods,it is supposed that the measured information for the FTC is the probability density functions（PDFs） of the system output rather than its measured value.A radial basis functions（RBFs） neural network technique is proposed so that the output PDFs can be formulated in terms of the dynamic weighings of the RBFs neural network.As a result,the nonlinear FTC problem subject to dynamic relation between the input and the output PDFs can be transformed into a nonlinear FTC problem subject to dynamic relation between the control input and the weights of the RBFs neural network approximation to the output PDFs.The FTC design consists of two steps.The first step is fault detection and diagnosis（FDD）,which can produce an alarm when there is a fault in the system and also locate which component has a fault.The second step is to adapt the controller to the faulty case so that the system is able to achieve its target.A linear matrix inequality（LMI） based feasible FTC method is applied such that the fault can be detected and diagnosed.An illustrated example is included to demonstrate the efficiency of the proposed algorithm,and satisfactory results have been obtained.展开更多
In this paper,a fault tolerant control with the consideration of actuator fault for a networked control system （NCS） with packet loss is addressed.The NCS with data packet loss can be described as a switched system ...In this paper,a fault tolerant control with the consideration of actuator fault for a networked control system （NCS） with packet loss is addressed.The NCS with data packet loss can be described as a switched system model.Packet loss dependent Lyapunov function is used and a fault tolerant controller is proposed respectively for arbitrary packet loss process and Markovian packet loss process.Considering a controlled plant with external energy-bounded disturbance,a robust H ∞ fault tolerant controller is designed for the NCS.These results are also expanded to the NCS with packet loss and networked-induced delay.Numerical examples are given to illustrate the effectiveness of the proposed design method.展开更多
A model-based fault tolerant control approach for hybrid linear dynamic systems is proposed in this paper. The proposed method, taking advantage of reliable control, can maintain the performance of the faulty system d...A model-based fault tolerant control approach for hybrid linear dynamic systems is proposed in this paper. The proposed method, taking advantage of reliable control, can maintain the performance of the faulty system during the time delay of fault detection and diagnosis (FDD) and fault accommodation (FA), which can be regarded as the first line of defence against sensor faults. Simulation results of a three-tank system with sensor fault are given to show the efficiency of the method.展开更多
A new fault-tolerant control scheme is proposed for a nonlinear collaborative system that contains two robot subsystems. When fault occurs in one subsystem, the fault-free subsystem is used to compensate the fault inf...A new fault-tolerant control scheme is proposed for a nonlinear collaborative system that contains two robot subsystems. When fault occurs in one subsystem, the fault-free subsystem is used to compensate the fault influence of the faulty one on the whole collaborative system. When the faulty subsystem could not repair itself or the repair process needs a long time, the controller of the fault-free subsystem is reconfigured using the fault diagnosis information and other measured infor- mation, leading to the fault tolerant control of the robot collaborative system. Simulations of fault tolerant control for the robot collaborative system show the effectiveness of the proposed method.展开更多
An equivalent sliding mode fault-tolerant control method with continuous switching is proposed for vertical tail damage.First,the nonlinear damage model of aircraft and the estimation of stability and control derivati...An equivalent sliding mode fault-tolerant control method with continuous switching is proposed for vertical tail damage.First,the nonlinear damage model of aircraft and the estimation of stability and control derivatives are introduced.Secondly,the linear sliding surface and the equivalent sliding mode controller are constructed,and the sufficient conditions for the stability of the damaged aircraft motion model are given by using the Lyapunov technique.The damage-tolerant controller is designed based on an adaptive sliding mode control for analyzing damaged aircraft systems.Furthermore,the hyperbolic tangent function is utilized to replace the symbolic function in the controller.The feasibility of the hyperbolic tangent function as the switching function is analyzed theoretically.Finally,the Boeing-747100/200 model is taken as an example to demonstrate the efficiency of theoretical results by recognizing the structural fault of aircraft.Numerical results show that the control law has a positive impact on the performance of the closed-loop system,and it also has a better fault tolerance and robustness towards external disturbance compared with traditional methods of damaged aircraft stabilization control.展开更多
The command tracking problem of formation flight control system(FFCS)for multiple unmanned aerial vehicles(UAVs)with sensor faults is discussed.And the objective of the addressed control problem is to design a robust ...The command tracking problem of formation flight control system(FFCS)for multiple unmanned aerial vehicles(UAVs)with sensor faults is discussed.And the objective of the addressed control problem is to design a robust fault tolerant tracking controller such that,for the disturbances and sensor faults,the closed-loop system is asymptotically stable with a given disturbance attenuation level.A robust fault tolerant tracking control scheme,combining an observer with H∞ performance,is proposed.Furthermore,it is proved that the designed controller can guarantee asymptotic stability of FFCS despite sensor faults.Finally,a simulation of two UAV formations is employed to demonstrate the effectiveness of the proposed approach.展开更多
A fault tolerant control method is proposed in this paper for a turbofan engine gas path degradation through the full flight envelope. A Quantum-behaved Particle Swarm Optimization(QPSO) algorithm is applied to obtain...A fault tolerant control method is proposed in this paper for a turbofan engine gas path degradation through the full flight envelope. A Quantum-behaved Particle Swarm Optimization(QPSO) algorithm is applied to obtain engine inputs adjustments, which contribute to construct off-line performance accommodation interpolation schedules. With a double closed-loop control system structure, command control is corrected based on real-time fault diagnostic results. Simulations indicate that fault tolerant control could reduce thrust and stall margin loss effectively in gas path faults.展开更多
Effective fault diagnosis and fault-tolerant control method for aeronautics electromechanical actuator is concerned in this paper.By borrowing the advantages of model-driven and data-driven methods,a fault tolerant no...Effective fault diagnosis and fault-tolerant control method for aeronautics electromechanical actuator is concerned in this paper.By borrowing the advantages of model-driven and data-driven methods,a fault tolerant nonsingular terminal sliding mode control method based on support vector machine(SVM)is proposed.A SVM is designed to estimate the fault by off-line learning from small sample data with solving convex quadratic programming method and is introduced into a high-gain observer,so as to improve the state estimation and fault detection accuracy when the fault occurs.The state estimation value of the observer is used for state reconfiguration.A novel nonsingular terminal sliding mode surface is designed,and Lyapunov theorem is used to derive a parameter adaptation law and a control law.It is guaranteed that the proposed controller can achieve asymptotical stability which is superior to many advanced fault-tolerant controllers.In addition,the parameter estimation also can help to diagnose the system faults because the faults can be reflected by the parameters variation.Extensive comparative simulation and experimental results illustrate the effectiveness and advancement of the proposed controller compared with several other main-stream controllers.展开更多
This paper considers the adaptive finite-time control and observer design method for a class of non-strict feedback systems with unmeasurable states,unknown nonlinear dynamics and actuator faults.In this paper,an obse...This paper considers the adaptive finite-time control and observer design method for a class of non-strict feedback systems with unmeasurable states,unknown nonlinear dynamics and actuator faults.In this paper,an observer is proposed to estimate the unmeasurable states in finite-time based on adaptive technique and neural networks,while the actuator faults are not included.Command filter is used to solve the computational explosion and singularity problems caused by the traditional backstepping and non-strict feedback structure,respectively.Since the fault efficiency indicators in real systems are not available,two-layer neural networks are adopted,where the first network is to estimate the unknown nonlinearities of systems and the second one is to estimate fault efficiency indicators and unknown nonlinear terms.The proposed scheme guarantees that states are bounded through stability theorem.Finally,two experiments including a numerical example and a spring-mass-damper system are given to verify the effectiveness of the proposed method.展开更多
This paper presents a novel Fault Tolerant Control(FTC)scheme based on accelerated Landweber iteration and redistribution mechanism for a horizontal takeoff horizontal landing reusable launch vehicle(RLV).First,an ada...This paper presents a novel Fault Tolerant Control(FTC)scheme based on accelerated Landweber iteration and redistribution mechanism for a horizontal takeoff horizontal landing reusable launch vehicle(RLV).First,an adaptive law based on fixed-time non-singular fast terminal sliding mode control(NFTSMC),which focuses on the attitude tracking controller design for RLV in the presence of model couplings,parameter uncertainties and external disturbances,is proposed to produce virtual control command.On this basis,a novel Control Allocation(CA)based on accelerated Landwber iteration is presented to realize proportional allocation of virtual control command among the actuators according to the effective gain as well as the distance from the current position of actuator to corresponding saturation limit.Meanwhile a novel redistribution mechanism is introduced to redistribute oversaturated command among healthy actuators(non-faulty or redundant).The proposed method can be applied to a real-time FTC system so that the controller reconfiguring is not required in case of actuator faults.Finally,the effectiveness of the proposed method is demonstrated by numerical simulations.展开更多
In this paper, a robust controller for a six degrees of freedom （6 DOF） octorotor helicopter control is proposed in presence of actuator and sensor faults. Neural networks （NN）, interval type-2 fuzzy logic control...In this paper, a robust controller for a six degrees of freedom （6 DOF） octorotor helicopter control is proposed in presence of actuator and sensor faults. Neural networks （NN）, interval type-2 fuzzy logic control （IT2FLC） approach and sliding mode control （SMC） technique are used to design a controller, named fault tolerant neural network interval type-2 fuzzy sliding mode controll,~r （FTNNIT2FSMC）, for each subsystem of the octorotor helicopter. The proposed control scheme allows avoiding difficult modeling, attenuating the chattering effect of the SMC, reducing the number of rules for the fuzzy controller, and guaranteeing the stability and the robustness of the system. The simulation results show that the FTNNIT2FSMC can greatly alleviate the chattering effect, tracking well in presence of actuator and sensor faults.展开更多
This paper investigates the active fault tolerant cooperative control problem for a team of wheeled mobile robots whose actuators are subjected to partial or severe faults during the team mission.The cooperative robot...This paper investigates the active fault tolerant cooperative control problem for a team of wheeled mobile robots whose actuators are subjected to partial or severe faults during the team mission.The cooperative robots network only requires the interaction between local neighbors over the undirected graph and does not assume the existence of leaders in the network.We assume that the communication exists all the time during the mission.To avoid the system's deterioration in the event of a fault,a set of extended Kalman filters(EKFs)are employed to monitor the actuators'behavior for each robot.Then,based on the online information given by the EKFs,a reconfigurable sliding mode control is proposed to take an appropriate action to accommodate that fault.In this research study,two types of faults are considered.The first type is a partial actuator fault in which the faulty actuator responds to a partial of its control input,but still has the capability to continue the mission when the control law is reconfigured.In addition,the controllers of the remaining healthy robots are reconfigured simultaneously to move within the same capability of the faulty one.The second type is a severe actuator fault in which the faulty actuator is subjected to a large loss of its control input,and that lead the exclusion of that faulty robot from the team formation.Consequently,the remaining healthy robots update their reference trajectories and form a new formation shape to achieve the rest of the team mission.展开更多
This paper studies the fault tolerant control, adaptive approach, for linear time-invariant two-time-scale and three-time-scale singularly perturbed systems in presence of actuator faults and external disturbances. Fi...This paper studies the fault tolerant control, adaptive approach, for linear time-invariant two-time-scale and three-time-scale singularly perturbed systems in presence of actuator faults and external disturbances. First, the full order system will be controlled using v-dependent control law. The corresponding Lyapunov equation is ill-conditioned due to the presence of slow and fast phenomena. Secondly, a time-scale decomposition of the Lyapunov equation is carried out using singular perturbation method to avoid the numerical stiffness. A composite control law based on local controllers of the slow and fast subsystems is also used to make the control law ε-independent. The designed fault tolerant control guarantees the robust stability of the global closed-loop singularly perturbed system despite loss of effectiveness of actuators. The stability is proved based on the Lyapunov stability theory in the case where the singular perturbation parameter is sufficiently small. A numerical example is provided to illustrate the proposed method.展开更多
Purpose-The purpose of this paper is to look at the problem of fault tolerant control(FTC)for discrete time nonlinear system described by Interval Type-2 Takagi–Sugeno(IT2 TS)fuzzy model subjected to stochastic noise...Purpose-The purpose of this paper is to look at the problem of fault tolerant control(FTC)for discrete time nonlinear system described by Interval Type-2 Takagi–Sugeno(IT2 TS)fuzzy model subjected to stochastic noise and actuator faults.Design/methodology/approach–An IT2 fuzzy augmented state observer is first developed to estimate simultaneously the system states and the actuator faults since this estimation is required for the design of the FTC control law.Furthermore,based on the information of the states and the faults estimate,an IT2 fuzzy state feedback controller is conceived to compensate for the faults effect and to ensure a good tracking performance between the healthy system and the faulty one.Sufficient conditions for the existence of the IT2 fuzzy controller and the IT2 fuzzy observer are given in terms of linear matrix inequalities which can be solved using a two-step computing procedure.Findings–The paper opted for simulation results which are applied to the three-tank system.These results are presented to illustrate the effectiveness of the proposed FTC strategy.Originality/value–In this paper,the problem of active FTC design for noisy and faulty nonlinear system represented by IT2 TS fuzzy model is treated.The developed IT2 fuzzy fault tolerant controller is designed such that it can guarantee the stability of the closed-loop system.Moreover,the proposed controller allows to accommodate for faults,presents a satisfactory state tracking performance and outperforms the traditional type-1 fuzzy fault tolerant controller.展开更多
The multiphase multilevel motor drives are a promising solution for some high-power and high-reliability applications,since they have multiple power conversion routes,a large amount of redundant voltage vectors,higher...The multiphase multilevel motor drives are a promising solution for some high-power and high-reliability applications,since they have multiple power conversion routes,a large amount of redundant voltage vectors,higher equivalent switching frequencies and superior harmonic performance.It has great significance to exploit their remedial control strategies in depth to fully utilize their high fault tolerant capabilities.This paper will present an updated technical review of fault tolerant control schemes for multiphase multilevel motor drives.Based on exemplification of the diode neutral-point-clamping three-level(DNPC-3L)inverters and T-type NPC three-level(TNPC-3L)inverters fed asymmetric six-phase PMSM drives,the study is taken for both phase-leg faults and switch faults.Furthermore,the discussion on multiple-switch faults,short-circuit switch faults and switch and leg hybrid faulty conditions are discussed in this paper.展开更多
Wind energy is one of the widely applied renewable energies in the world. Wind turbine as the main wind energy converter at present has very complex technical system containing a huge number of components,actuators an...Wind energy is one of the widely applied renewable energies in the world. Wind turbine as the main wind energy converter at present has very complex technical system containing a huge number of components,actuators and sensors. However, despite of the hardware redundancy, sensor faults have often affected the wind turbine normal operation and thus caused energy generation loss. In this paper, aiming at the wind turbine hydraulic pitch system, data-driven design of process monitoring(PM) and diagnosis has been realized in the wind turbine benchmark. Fault tolerant control(FTC) strategies focused on sensor faults have also been presented here, where with the implementation of soft sensor the sensor fault can be handled and the performance of the system is improved. The performance of this method is demonstrated with the wind turbine benchmark provided by Math Works.展开更多
A co-design scheme of event-triggered sampling mechanism and active fault tolerant control(FTC) is developed. Firstly,a fault diagnosis observer is designed to estimate both the fault and the state simultaneously by u...A co-design scheme of event-triggered sampling mechanism and active fault tolerant control(FTC) is developed. Firstly,a fault diagnosis observer is designed to estimate both the fault and the state simultaneously by using the event-triggered sampled output. Some H∞constraints between the estimation errors and the event-triggered sampling mechanism are established to ensure the estimation accuracy. Then, based on the constraints and the obtained fault information, an event-triggered detector and a static fault tolerant controller are co-designed to guarantee the stability of the faulty system and to reduce the sensor communication cost.Furthermore, the problem of the event detector and dynamic FTC co-design is also investigated. Simulation results of an unstable batch reactor are finally provided to illustrate the effectiveness of the proposed method.展开更多
基金Natural Science Foundation of Gansu Province(Joint)Project(No.213244)Natural Science Foundation of Gansu Province(No.145RJZA136)Youth Science Foundation of Lanzhou Jiaotong University(No.2013040)
文摘In view of the current sensors failure in electric pitch system,a variable universe fuzzy fault tolerant control method of electric pitch control system based on single current detection is proposed.When there is single or two-current sensor fault occurs,based on the proposed method the missing current information can be reconstructed by using direct current（DC）bus current sensor and the three-phase current can be updated in time within any two adjacent sampling periods,so as to ensure stability of the closed-loop system.And then the switchover and fault tolerant control of fault current sensor would be accomplished by fault diagnosis method based on adaptive threshold judgment.For the reconstructed signal error caused by the modulation method and the main control target of electric pitch system,a variable universe fuzzy control method is used in the speed loop,which can improve the anti-disturbance ability to load variation,and the robustness of fault tolerance system.The results show that the fault tolerant control method makes the variable pitch control system still has ideal control characteristics in case of sensor failure although part of the system performance is lost,thus the correctness of the proposed method is verified.
基金supported in part by the National Natural ScienceFoundation of China(61533017,61973330,61773075,61603387)the Early Career Development Award of SKLMCCS(20180201)the State Key Laboratory of Synthetical Automation for Process Industries(2019-KF-23-03)。
文摘In this paper, a data-based fault tolerant control(FTC) scheme is investigated for unknown continuous-time(CT)affine nonlinear systems with actuator faults. First, a neural network(NN) identifier based on particle swarm optimization(PSO) is constructed to model the unknown system dynamics. By utilizing the estimated system states, the particle swarm optimized critic neural network(PSOCNN) is employed to solve the Hamilton-Jacobi-Bellman equation(HJBE) more efficiently.Then, a data-based FTC scheme, which consists of the NN identifier and the fault compensator, is proposed to achieve actuator fault tolerance. The stability of the closed-loop system under actuator faults is guaranteed by the Lyapunov stability theorem. Finally, simulations are provided to demonstrate the effectiveness of the developed method.
基金Supported by the National Natural Science Foundation of China (No. 60025307, No. 60234010) the National 863 Project(No. 2001AA413130,2002AA412420)+1 种基金 Research Fund for the Doctoral Program of Higher Education (No. 20020003063) the National 973 Program
文摘Based on a nonlinear state predictor (NSP) and a strong tracking filter (STF), a sensor fault tolerant generic model control (FTGMC) approach for a class of nonlinear time-delay processes is proposed. First, the NSP is introduced, and it is used to extend the conventional generic model control (GMC) to nonlinear processes with large input time-delay. Then the STF is adopted to estimate process states and sensor bias, the estimated sensor bias is used to drive a fault detection logic. When a sensor fault is detected, the estimated process states by the STF will be used to construct the process output to form a 'soft sensor', which is then used by the NSP (instead of the real outputs) to provide state predictors. These procedures constitute an active fault tolerant control scheme. Finally, simulation results of a three-tank-system demonstrate the effectiveness of the proposed approach.
基金supported by the UK Leverhulme Trust (F/00 120/BC)the National Natural Science Foundation of China (6082800760974029)
文摘A new fault tolerant control（FTC） via a controller reconfiguration approach for general stochastic nonlinear systems is studied.Different from the formulation of classical FTC methods,it is supposed that the measured information for the FTC is the probability density functions（PDFs） of the system output rather than its measured value.A radial basis functions（RBFs） neural network technique is proposed so that the output PDFs can be formulated in terms of the dynamic weighings of the RBFs neural network.As a result,the nonlinear FTC problem subject to dynamic relation between the input and the output PDFs can be transformed into a nonlinear FTC problem subject to dynamic relation between the control input and the weights of the RBFs neural network approximation to the output PDFs.The FTC design consists of two steps.The first step is fault detection and diagnosis（FDD）,which can produce an alarm when there is a fault in the system and also locate which component has a fault.The second step is to adapt the controller to the faulty case so that the system is able to achieve its target.A linear matrix inequality（LMI） based feasible FTC method is applied such that the fault can be detected and diagnosed.An illustrated example is included to demonstrate the efficiency of the proposed algorithm,and satisfactory results have been obtained.
基金supported by National Natural Science Foundation of China (No. 60874052)
文摘In this paper,a fault tolerant control with the consideration of actuator fault for a networked control system （NCS） with packet loss is addressed.The NCS with data packet loss can be described as a switched system model.Packet loss dependent Lyapunov function is used and a fault tolerant controller is proposed respectively for arbitrary packet loss process and Markovian packet loss process.Considering a controlled plant with external energy-bounded disturbance,a robust H ∞ fault tolerant controller is designed for the NCS.These results are also expanded to the NCS with packet loss and networked-induced delay.Numerical examples are given to illustrate the effectiveness of the proposed design method.
基金Supported by National Natural Science Foundation of P.R.China (60574083)Key Laboratory of Process Industry Automation, Ministry of Education of P.R.China (PAL200514)Innovation Scientific Fund of Nanjing University of Aeronautics and Astronautics (Y0508-031)
文摘A model-based fault tolerant control approach for hybrid linear dynamic systems is proposed in this paper. The proposed method, taking advantage of reliable control, can maintain the performance of the faulty system during the time delay of fault detection and diagnosis (FDD) and fault accommodation (FA), which can be regarded as the first line of defence against sensor faults. Simulation results of a three-tank system with sensor fault are given to show the efficiency of the method.
基金Supported by the National Natural Science Foundation of China (61104022, 10971202)the Science and Technology Research Key Program of Henan Educational Committee(12A120009)
文摘A new fault-tolerant control scheme is proposed for a nonlinear collaborative system that contains two robot subsystems. When fault occurs in one subsystem, the fault-free subsystem is used to compensate the fault influence of the faulty one on the whole collaborative system. When the faulty subsystem could not repair itself or the repair process needs a long time, the controller of the fault-free subsystem is reconfigured using the fault diagnosis information and other measured infor- mation, leading to the fault tolerant control of the robot collaborative system. Simulations of fault tolerant control for the robot collaborative system show the effectiveness of the proposed method.
基金The National Natural Science Foundation of China(No.61973172,61973175)the Key Technologies R&D Program of Tianjin(No.19JCZDJC32800).
文摘An equivalent sliding mode fault-tolerant control method with continuous switching is proposed for vertical tail damage.First,the nonlinear damage model of aircraft and the estimation of stability and control derivatives are introduced.Secondly,the linear sliding surface and the equivalent sliding mode controller are constructed,and the sufficient conditions for the stability of the damaged aircraft motion model are given by using the Lyapunov technique.The damage-tolerant controller is designed based on an adaptive sliding mode control for analyzing damaged aircraft systems.Furthermore,the hyperbolic tangent function is utilized to replace the symbolic function in the controller.The feasibility of the hyperbolic tangent function as the switching function is analyzed theoretically.Finally,the Boeing-747100/200 model is taken as an example to demonstrate the efficiency of theoretical results by recognizing the structural fault of aircraft.Numerical results show that the control law has a positive impact on the performance of the closed-loop system,and it also has a better fault tolerance and robustness towards external disturbance compared with traditional methods of damaged aircraft stabilization control.
基金supported in part by the Post Doctoral Research Foundation of Jiangsu Province(No.1701140B)the National Natural Science Foundation of China (No. 61403195)the GF Research and Development Project of the Nanjing Tech Universities(No.201709)
文摘The command tracking problem of formation flight control system(FFCS)for multiple unmanned aerial vehicles(UAVs)with sensor faults is discussed.And the objective of the addressed control problem is to design a robust fault tolerant tracking controller such that,for the disturbances and sensor faults,the closed-loop system is asymptotically stable with a given disturbance attenuation level.A robust fault tolerant tracking control scheme,combining an observer with H∞ performance,is proposed.Furthermore,it is proved that the designed controller can guarantee asymptotic stability of FFCS despite sensor faults.Finally,a simulation of two UAV formations is employed to demonstrate the effectiveness of the proposed approach.
文摘A fault tolerant control method is proposed in this paper for a turbofan engine gas path degradation through the full flight envelope. A Quantum-behaved Particle Swarm Optimization(QPSO) algorithm is applied to obtain engine inputs adjustments, which contribute to construct off-line performance accommodation interpolation schedules. With a double closed-loop control system structure, command control is corrected based on real-time fault diagnostic results. Simulations indicate that fault tolerant control could reduce thrust and stall margin loss effectively in gas path faults.
基金Supported by National Natural Science Foundation of China (Grant No.51975294)Fundamental Research Funds for the Central Universities of China (Grant No.30922010706)。
文摘Effective fault diagnosis and fault-tolerant control method for aeronautics electromechanical actuator is concerned in this paper.By borrowing the advantages of model-driven and data-driven methods,a fault tolerant nonsingular terminal sliding mode control method based on support vector machine(SVM)is proposed.A SVM is designed to estimate the fault by off-line learning from small sample data with solving convex quadratic programming method and is introduced into a high-gain observer,so as to improve the state estimation and fault detection accuracy when the fault occurs.The state estimation value of the observer is used for state reconfiguration.A novel nonsingular terminal sliding mode surface is designed,and Lyapunov theorem is used to derive a parameter adaptation law and a control law.It is guaranteed that the proposed controller can achieve asymptotical stability which is superior to many advanced fault-tolerant controllers.In addition,the parameter estimation also can help to diagnose the system faults because the faults can be reflected by the parameters variation.Extensive comparative simulation and experimental results illustrate the effectiveness and advancement of the proposed controller compared with several other main-stream controllers.
基金supported by the National Natural Science Foundation of China under Grant Nos.62003183,62373208,and 62003097the Taishan Scholar program of Shandong Province of China under Grant No.tsqn202306218the Talent Introduction and Cultivation Plan for Youth Innovation of Universities in Shandong Province。
文摘This paper considers the adaptive finite-time control and observer design method for a class of non-strict feedback systems with unmeasurable states,unknown nonlinear dynamics and actuator faults.In this paper,an observer is proposed to estimate the unmeasurable states in finite-time based on adaptive technique and neural networks,while the actuator faults are not included.Command filter is used to solve the computational explosion and singularity problems caused by the traditional backstepping and non-strict feedback structure,respectively.Since the fault efficiency indicators in real systems are not available,two-layer neural networks are adopted,where the first network is to estimate the unknown nonlinearities of systems and the second one is to estimate fault efficiency indicators and unknown nonlinear terms.The proposed scheme guarantees that states are bounded through stability theorem.Finally,two experiments including a numerical example and a spring-mass-damper system are given to verify the effectiveness of the proposed method.
基金the financial supports by the open Fund of National Defense Key Discipline Laboratory of Micro-Spacecraft Technology,China(No.HIT.KLOF.MST.2018028)the open Fund of National Defense Key Discipline Laboratory of Micro-Spacecraft Technology,China(No.HIT.KLOF.MST.201704)。
文摘This paper presents a novel Fault Tolerant Control(FTC)scheme based on accelerated Landweber iteration and redistribution mechanism for a horizontal takeoff horizontal landing reusable launch vehicle(RLV).First,an adaptive law based on fixed-time non-singular fast terminal sliding mode control(NFTSMC),which focuses on the attitude tracking controller design for RLV in the presence of model couplings,parameter uncertainties and external disturbances,is proposed to produce virtual control command.On this basis,a novel Control Allocation(CA)based on accelerated Landwber iteration is presented to realize proportional allocation of virtual control command among the actuators according to the effective gain as well as the distance from the current position of actuator to corresponding saturation limit.Meanwhile a novel redistribution mechanism is introduced to redistribute oversaturated command among healthy actuators(non-faulty or redundant).The proposed method can be applied to a real-time FTC system so that the controller reconfiguring is not required in case of actuator faults.Finally,the effectiveness of the proposed method is demonstrated by numerical simulations.
文摘In this paper, a robust controller for a six degrees of freedom （6 DOF） octorotor helicopter control is proposed in presence of actuator and sensor faults. Neural networks （NN）, interval type-2 fuzzy logic control （IT2FLC） approach and sliding mode control （SMC） technique are used to design a controller, named fault tolerant neural network interval type-2 fuzzy sliding mode controll,~r （FTNNIT2FSMC）, for each subsystem of the octorotor helicopter. The proposed control scheme allows avoiding difficult modeling, attenuating the chattering effect of the SMC, reducing the number of rules for the fuzzy controller, and guaranteeing the stability and the robustness of the system. The simulation results show that the FTNNIT2FSMC can greatly alleviate the chattering effect, tracking well in presence of actuator and sensor faults.
文摘This paper investigates the active fault tolerant cooperative control problem for a team of wheeled mobile robots whose actuators are subjected to partial or severe faults during the team mission.The cooperative robots network only requires the interaction between local neighbors over the undirected graph and does not assume the existence of leaders in the network.We assume that the communication exists all the time during the mission.To avoid the system's deterioration in the event of a fault,a set of extended Kalman filters(EKFs)are employed to monitor the actuators'behavior for each robot.Then,based on the online information given by the EKFs,a reconfigurable sliding mode control is proposed to take an appropriate action to accommodate that fault.In this research study,two types of faults are considered.The first type is a partial actuator fault in which the faulty actuator responds to a partial of its control input,but still has the capability to continue the mission when the control law is reconfigured.In addition,the controllers of the remaining healthy robots are reconfigured simultaneously to move within the same capability of the faulty one.The second type is a severe actuator fault in which the faulty actuator is subjected to a large loss of its control input,and that lead the exclusion of that faulty robot from the team formation.Consequently,the remaining healthy robots update their reference trajectories and form a new formation shape to achieve the rest of the team mission.
文摘This paper studies the fault tolerant control, adaptive approach, for linear time-invariant two-time-scale and three-time-scale singularly perturbed systems in presence of actuator faults and external disturbances. First, the full order system will be controlled using v-dependent control law. The corresponding Lyapunov equation is ill-conditioned due to the presence of slow and fast phenomena. Secondly, a time-scale decomposition of the Lyapunov equation is carried out using singular perturbation method to avoid the numerical stiffness. A composite control law based on local controllers of the slow and fast subsystems is also used to make the control law ε-independent. The designed fault tolerant control guarantees the robust stability of the global closed-loop singularly perturbed system despite loss of effectiveness of actuators. The stability is proved based on the Lyapunov stability theory in the case where the singular perturbation parameter is sufficiently small. A numerical example is provided to illustrate the proposed method.
文摘Purpose-The purpose of this paper is to look at the problem of fault tolerant control(FTC)for discrete time nonlinear system described by Interval Type-2 Takagi–Sugeno(IT2 TS)fuzzy model subjected to stochastic noise and actuator faults.Design/methodology/approach–An IT2 fuzzy augmented state observer is first developed to estimate simultaneously the system states and the actuator faults since this estimation is required for the design of the FTC control law.Furthermore,based on the information of the states and the faults estimate,an IT2 fuzzy state feedback controller is conceived to compensate for the faults effect and to ensure a good tracking performance between the healthy system and the faulty one.Sufficient conditions for the existence of the IT2 fuzzy controller and the IT2 fuzzy observer are given in terms of linear matrix inequalities which can be solved using a two-step computing procedure.Findings–The paper opted for simulation results which are applied to the three-tank system.These results are presented to illustrate the effectiveness of the proposed FTC strategy.Originality/value–In this paper,the problem of active FTC design for noisy and faulty nonlinear system represented by IT2 TS fuzzy model is treated.The developed IT2 fuzzy fault tolerant controller is designed such that it can guarantee the stability of the closed-loop system.Moreover,the proposed controller allows to accommodate for faults,presents a satisfactory state tracking performance and outperforms the traditional type-1 fuzzy fault tolerant controller.
基金Supported by National Natural Science Foundation of China under Grant 51577027.
文摘The multiphase multilevel motor drives are a promising solution for some high-power and high-reliability applications,since they have multiple power conversion routes,a large amount of redundant voltage vectors,higher equivalent switching frequencies and superior harmonic performance.It has great significance to exploit their remedial control strategies in depth to fully utilize their high fault tolerant capabilities.This paper will present an updated technical review of fault tolerant control schemes for multiphase multilevel motor drives.Based on exemplification of the diode neutral-point-clamping three-level(DNPC-3L)inverters and T-type NPC three-level(TNPC-3L)inverters fed asymmetric six-phase PMSM drives,the study is taken for both phase-leg faults and switch faults.Furthermore,the discussion on multiple-switch faults,short-circuit switch faults and switch and leg hybrid faulty conditions are discussed in this paper.
基金the National Natural Science Foundation of China(No.51205018)the Fundamental Research Funds for the Central Universities of China(No.FRF-TP-14-121A2)the Research Project of State Key Laboratory of Mechanical System and Vibration(No.MSV-2014-09)
文摘Wind energy is one of the widely applied renewable energies in the world. Wind turbine as the main wind energy converter at present has very complex technical system containing a huge number of components,actuators and sensors. However, despite of the hardware redundancy, sensor faults have often affected the wind turbine normal operation and thus caused energy generation loss. In this paper, aiming at the wind turbine hydraulic pitch system, data-driven design of process monitoring(PM) and diagnosis has been realized in the wind turbine benchmark. Fault tolerant control(FTC) strategies focused on sensor faults have also been presented here, where with the implementation of soft sensor the sensor fault can be handled and the performance of the system is improved. The performance of this method is demonstrated with the wind turbine benchmark provided by Math Works.
基金supported by the National Natural Science Foundation of China(6147315961374136+1 种基金61104028)the Research Innovation Program of Nantong University(YKC16004)
文摘A co-design scheme of event-triggered sampling mechanism and active fault tolerant control(FTC) is developed. Firstly,a fault diagnosis observer is designed to estimate both the fault and the state simultaneously by using the event-triggered sampled output. Some H∞constraints between the estimation errors and the event-triggered sampling mechanism are established to ensure the estimation accuracy. Then, based on the constraints and the obtained fault information, an event-triggered detector and a static fault tolerant controller are co-designed to guarantee the stability of the faulty system and to reduce the sensor communication cost.Furthermore, the problem of the event detector and dynamic FTC co-design is also investigated. Simulation results of an unstable batch reactor are finally provided to illustrate the effectiveness of the proposed method.
