Expert knowledge is the key to modeling milling fault detection systems based on the belief rule base.The construction of an initial expert knowledge base seriously affects the accuracy and interpretability of the mil...Expert knowledge is the key to modeling milling fault detection systems based on the belief rule base.The construction of an initial expert knowledge base seriously affects the accuracy and interpretability of the milling fault detection model.However,due to the complexity of the milling system structure and the uncertainty of the milling failure index,it is often impossible to construct model expert knowledge effectively.Therefore,a milling system fault detection method based on fault tree analysis and hierarchical BRB(FTBRB)is proposed.Firstly,the proposed method uses a fault tree and hierarchical BRB modeling.Through fault tree analysis(FTA),the logical correspondence between FTA and BRB is sorted out.This can effectively embed the FTA mechanism into the BRB expert knowledge base.The hierarchical BRB model is used to solve the problem of excessive indexes and avoid combinatorial explosion.Secondly,evidence reasoning(ER)is used to ensure the transparency of the model reasoning process.Thirdly,the projection covariance matrix adaptation evolutionary strategies(P-CMA-ES)is used to optimize the model.Finally,this paper verifies the validity model and the method’s feasibility techniques for milling data sets.展开更多
Innovations for electric vehicles have advanced quickly in latest decades. Large-scale business use of these vehicles is still constrained by reliability-related issues. By utilising fault tree (FT) and Monte Carlo si...Innovations for electric vehicles have advanced quickly in latest decades. Large-scale business use of these vehicles is still constrained by reliability-related issues. By utilising fault tree (FT) and Monte Carlo simulation, a mathematical prototype is created that includes the reliability traits of all major electrical parts of the vehicle system, including the battery, motor, drive, controllers. The research demonstrates that by raising the component restoration rates, the vehicle’s survivability can be raised. A thorough discussion of this paradigm is provided, along with a presentation and analysis of the reliability estimations based on an electric vehicle. This research on the reliability design and maintenance of an electric vehicle can be supported by the ideas that are outlined in the paper. Additionally, the findings of this study may be helpful to those who build electric vehicle, especially when upgrading the components efficiency and planning for reliability increase.展开更多
In consideration of the uncertainty of basic events failure rate and lack of probability statistical information in fault tree analysis( FTA) of excavator variable-frequency speed control system, the interval theory w...In consideration of the uncertainty of basic events failure rate and lack of probability statistical information in fault tree analysis( FTA) of excavator variable-frequency speed control system, the interval theory was employed and combined with conventional FTA method. The basic events failure probabilities were described by interval numbers,and the interval operators of logical gates in FTA were deduced based on interval theory. Finally,the reliability assessment of excavator variable-frequency speed control system was done by interval FTA method. The result shows that the interval FTA method is suitable for the complex system with insufficient failure data.展开更多
CNC machine tool is a large complex system which contains both mechanical and electrical components.As one of these components,the spindle is crucial for the performance of CNC machine tool.To improve the quality of C...CNC machine tool is a large complex system which contains both mechanical and electrical components.As one of these components,the spindle is crucial for the performance of CNC machine tool.To improve the quality of CNC machine,the reliability of spindle was evaluated in this paper using a fault tree analysis(FTA)method.The FTA method is a set of calculation methods based on Boolean algebra.However,it is difficult to analyze a large and complex fault tree with inaccurate results and low efficiency as well as the complexity of time and space.Both of them will result in the so-called "combinatorial explosion".To overcome this problem,the analysis method based on binary decision diagram(BDD)was introduced in our works,and a sorting method about bottom events was also recommended which can reduce the size of the BDD effectively.展开更多
In view of the environmental and safety risks of hazardous chemical explosions in chemical enterprises,the fault tree analysis was used to establish a fault tree model of hazardous chemical explosions and comprehensiv...In view of the environmental and safety risks of hazardous chemical explosions in chemical enterprises,the fault tree analysis was used to establish a fault tree model of hazardous chemical explosions and comprehensively analyze the possibility of the explosions.The 34 basic events that caused hazardous chemical explosions were expounded,and the minimum cut and path sets were obtained.The structure importance of basic events were calculated.According to the minimum path sets,the basic events when the accident does not occur were determined,and combined with the sequence of structure importance,the preventive measures for hazardous chemical explosion accidents were proposed.The fault tree model intuitively clarified the correlation between the direct causes of hazardous chemical explosion accidents,and proposed directions for effectively reducing the probability of hazardous chemical explosion accidents in the chemical industry.展开更多
During the past decade, coal dust and gas explosions have been the most two serious types of disasters in China, threatening the lives of miners and causing significant losses in terms of national property. In this pa...During the past decade, coal dust and gas explosions have been the most two serious types of disasters in China, threatening the lives of miners and causing significant losses in terms of national property. In this paper, an evaluation model of coal dust and gas explosions was constructed based on a fuzzy fault tree by taking the Xingli Coal Mine as a research site to identify the risk factors of coal dust and gas explosions.Furthermore, the hazards associated with such explosions were evaluated for this particular coal mine.After completing an on-site investigation, the fuzzy probabilities of basic events were obtained through expert scoring, and these expert opinions were then aggregated as trapezoidal fuzzy numbers to calculate the degrees of importance of all basic events. Finally, these degrees of importance were sorted. According to the resulting order, the basic events with higher probabilities were determined to identify key hazards in the daily safety management of this particular coal mine. Moreover, effective measures for preventing gas and coal dust explosions were derived. The fuzzy fault tree analysis method is of high significance in the analysis of accidental coal mine explosions and provides theoretical guidance for improving the efficiency of coal mine safety management in a scientific and feasible manner.展开更多
By using the fault tree analysis in reliability theory as the systematical analysis approach, the dust suppression mechanism in a spray system with wetting agent is shown in a logic tree and some graphical models. Fro...By using the fault tree analysis in reliability theory as the systematical analysis approach, the dust suppression mechanism in a spray system with wetting agent is shown in a logic tree and some graphical models. From these diagrams, all factors related to the spray system and their cause and effect relationship can be seen clearly. Based on the built logic tree, several mathematical models and new ideas for expressing the dust suppressing efficiency in the spray system are put forward. The significance of all factors related to the efficiency of suppressing dust is qualitatively described. Furthermore, the new concepts, such as, the effective reaction time between dust particle and droplet, the expansion phenomenon of laden dust droplet, the functions of volatile and the relative size distribution efficiency of wetting agent are presented. All this richenes the existing mechanism of dust abatement by spraying wetting agent. At last, several problems that need to be further investigated are also suggested in the paper.展开更多
The electrical system of CNC machine tool is very complex which involves many uncertain factors and dynamic stochastic characteristics when failure occurs.Therefore,the traditional system reliability analysis method,f...The electrical system of CNC machine tool is very complex which involves many uncertain factors and dynamic stochastic characteristics when failure occurs.Therefore,the traditional system reliability analysis method,fault tree analysis(FTA)method,based on static logic and static failure mechanism is no longer applicable for dynamic systems reliability analysis.Dynamic fault tree(DFT)analysis method can solve this problem effectively.In this method,DFT first should be pretreated to get a simplified fault tree(FT);then the FT was modularized to get the independent static subtrees and dynamic subtrees.Binary decision diagram(BDD)analysis method was used to analyze static subtrees,while an approximation algorithm was used to deal with dynamic subtrees.When the scale of each subtree is smaller than the system scale,the analysis efficiency can be improved significantly.At last,the usefulness of this DFT analysis method was proved by applying it to analyzing the reliability of electrical system.展开更多
In recent years, China's increased interest in environmental protection has led to a promotion of energy-efficient dual fuel(diesel/natural gas) ships in Chinese inland rivers. A natural gas as ship fuel may pose ...In recent years, China's increased interest in environmental protection has led to a promotion of energy-efficient dual fuel(diesel/natural gas) ships in Chinese inland rivers. A natural gas as ship fuel may pose dangers of fire and explosion if a gas leak occurs. If explosions or fires occur in the engine rooms of a ship, heavy damage and losses will be incurred. In this paper, a fault tree model is presented that considers both fires and explosions in a dual fuel ship; in this model, dual fuel engine rooms are the top events. All the basic events along with the minimum cut sets are obtained through the analysis.The primary factors that affect accidents involving fires and explosions are determined by calculating the degree of structure importance of the basic events.According to these results, corresponding measures are proposed to ensure and improve the safety and reliability of Chinese inland dual fuel ships.展开更多
Reliability allocation is a difficult multi-objective optimization problem. This paper presents a methodology for reliability allocation that can be applied to determine the reliability characteristics of reactor syst...Reliability allocation is a difficult multi-objective optimization problem. This paper presents a methodology for reliability allocation that can be applied to determine the reliability characteristics of reactor systems or subsystems. The dualistic contrast,known as one of the most powerful tools for optimization problems,is applied to the reliability allocation model of a typical system in this article. And the fault tree analysis,deemed to be one of the effective methods of reliability analysis,is also adopted. Thus a failure rate allocation model based on the fault tree analysis and dualistic contrast is achieved. An application on the emergency diesel generator in the nuclear power plant is given to illustrate the proposed method.展开更多
In petrochemical plant, the in-operation repairing is usually a repairing strategy with pressured inoperation repairing for avoiding huge economic losses caused by unplanned shutdown when some slight local leakage hap...In petrochemical plant, the in-operation repairing is usually a repairing strategy with pressured inoperation repairing for avoiding huge economic losses caused by unplanned shutdown when some slight local leakage happens in pipes. This paper studies the effects of repairing strategies on the failure probability of the pipe systems in process industries based on the time-average fault tree approach, especially the in-operation repairing strategies including pressured in-operation repairing activities. The fault tree model can predict the effect of different repairing plans on the pipe failure probability, which is significant to the optimization of the repairing plans. At first pipes are distinguished into four states in this model, i.e., successive state, flaw state, leakage state and failure state. Then the fault tree approach, which is usually applied in the studies of dynamic equipment, is adopted to model the pipe failure. Moreover, the effect of pressured in-operation repairing is also considered in the model. In addition, this paper proposes a series of time-average parameters of the fault tree model, all of which are used to calculate node parameters of the fault tree model. At last, a practical case is calculated based on the fault tree model in a repairing activity of pipe thinning.展开更多
Conventional fault tree and reliability analysis do not reflect the characteristics of basic events as non stationary and ergodic process. To overcome these drawbacks, theory of fuzzy sets is employed to run fault tre...Conventional fault tree and reliability analysis do not reflect the characteristics of basic events as non stationary and ergodic process. To overcome these drawbacks, theory of fuzzy sets is employed to run fault tree analysis(FTA) of roller oscillating tooth gear drive(ROTGD), the relative frequencies of basic events are considered as symmetrical normal fuzzy numbers, from the logical relationship between different events in the fault tree and fuzzy operators AND and OR, fuzzy probability of top event is solved. Finally, an example is given to demonstrate a real ROTGD system.展开更多
The explosive logic network( ELN) with two-input-oneoutput was designed with three explosive logic gap null gates. The time window of the output of the ELN was given,after which the dynamic fault tree analysis was imp...The explosive logic network( ELN) with two-input-oneoutput was designed with three explosive logic gap null gates. The time window of the output of the ELN was given,after which the dynamic fault tree analysis was implemented. Two dynamic failure modes of the ELN were obtained,and then their own Markov transition processes were established. After that,the probability of failure was calculated from the corresponding state transition diagram. The reliability of the ELN which was in different length of time under the ambient incentive was then analyzed. Based on the above processing,the reliability of the ELN can be improved.展开更多
Being one of the most expensive components of an electrical power plant, the failures of a power transformer can result in serious power system issues. So fault diagnosis for power transformer is highly important to e...Being one of the most expensive components of an electrical power plant, the failures of a power transformer can result in serious power system issues. So fault diagnosis for power transformer is highly important to ensure an uninterrupted power supply. Due to information transmission mistakes as well as arisen errors while processing data in surveying and monitoring state information of transformer, uncertain and incomplete information may be produced. Based on these points, this paper presents an intelligent fault diagnosis method of power transformer using fuzzy fault tree analysis (FTA) and beta distribution for failure possibility estimation. By using the technique we proposed herein, the continuous attribute values are transformed into the fuzzy numbers to give a realistic estimate of failure possibility of a basic event in FTA. Further, it explains a new approach based on Euclidean distance between fuzzy numbers, to rank the basic events in accordance with their Fuzzy Importance Index.展开更多
The effect of pruning severity on tree growth was analyzed by change point detection using segmented regression. The present study applied this analysis to a well-known published data set including diameter growth res...The effect of pruning severity on tree growth was analyzed by change point detection using segmented regression. The present study applied this analysis to a well-known published data set including diameter growth response, tree age, pruning severity and pretreatment crown size. First, multiple regression analysis was performed to assess the effect of tree age, pruning severity and pretreatment crown size on diameter growth response. Next, segmented regression analysis was performed to assess the effect of pruning severity on diameter growth response. The results of the multiple regression showed that diameter growth response was significantly influenced by pruning severity and pretreatment crown size. The results of the segmented regression showed that in the whole data set, an abrupt change toward a decrease in diameter growth response was detected at 25% of the live crown removed. However, in the group of fully crowned and open-grown, diameter growth response continuously decreased with increasing pruning severity with no significant abrupt change, whereas in the group of 70% - 90% live crown, diameter growth response did not significantly decrease up to the break point (53% crown removed) and then abruptly decreased. This may be the first study to show the numerical evaluation of the effect of pruning severity on tree growth by change point analysis.展开更多
In recent decades, Urban Heat Island Effects have become more pronounced and more widely examined. Despite great technological advances, our current societies still experience great spatial disparity in urban forest a...In recent decades, Urban Heat Island Effects have become more pronounced and more widely examined. Despite great technological advances, our current societies still experience great spatial disparity in urban forest access. Urban Heat Island Effects are measurable phenomenon that are being experienced by the world’s most urbanized areas, including increased summer high temperatures and lower evapotranspiration from having impervious surfaces instead of vegetation and trees. Tree canopy cover is our natural mitigation tool that absorbs sunlight for photosynthesis, protects humans from incoming radiation, and releases cooling moisture into the air. Unfortunately, urban areas typically have low levels of vegetation. Vulnerable urban communities are lower-income areas of inner cities with less access to heat protection like air conditioners. This study uses mean evapotranspiration levels to assess the variability of urban heat island effects across the state of Tennessee. Results show that increased developed land surface cover in Tennessee creates measurable changes in atmospheric evapotranspiration. As a result, the mean evapotranspiration levels in areas with less tree vegetation are significantly lower than the surrounding forested areas. Central areas of urban cities in Tennessee had lower mean evapotranspiration recordings than surrounding areas with less development. This work demonstrates the need for increased tree canopy coverage.展开更多
基金This work was supported in part by the Natural Science Foundation of China under Grant 62203461 and Grant 62203365in part by the Postdoctoral Science Foundation of China under Grant No.2020M683736+3 种基金in part by the Teaching reform project of higher education in Heilongjiang Province under Grant Nos.SJGY20210456 and SJGY20210457in part by the Natural Science Foundation of Heilongjiang Province of China under Grant No.LH2021F038in part by the graduate academic innovation project of Harbin Normal University under Grant Nos.HSDSSCX2022-17,HSDSSCX2022-18 andHSDSSCX2022-19in part by the Foreign Expert Project of Heilongjiang Province under Grant No.GZ20220131.
文摘Expert knowledge is the key to modeling milling fault detection systems based on the belief rule base.The construction of an initial expert knowledge base seriously affects the accuracy and interpretability of the milling fault detection model.However,due to the complexity of the milling system structure and the uncertainty of the milling failure index,it is often impossible to construct model expert knowledge effectively.Therefore,a milling system fault detection method based on fault tree analysis and hierarchical BRB(FTBRB)is proposed.Firstly,the proposed method uses a fault tree and hierarchical BRB modeling.Through fault tree analysis(FTA),the logical correspondence between FTA and BRB is sorted out.This can effectively embed the FTA mechanism into the BRB expert knowledge base.The hierarchical BRB model is used to solve the problem of excessive indexes and avoid combinatorial explosion.Secondly,evidence reasoning(ER)is used to ensure the transparency of the model reasoning process.Thirdly,the projection covariance matrix adaptation evolutionary strategies(P-CMA-ES)is used to optimize the model.Finally,this paper verifies the validity model and the method’s feasibility techniques for milling data sets.
文摘Innovations for electric vehicles have advanced quickly in latest decades. Large-scale business use of these vehicles is still constrained by reliability-related issues. By utilising fault tree (FT) and Monte Carlo simulation, a mathematical prototype is created that includes the reliability traits of all major electrical parts of the vehicle system, including the battery, motor, drive, controllers. The research demonstrates that by raising the component restoration rates, the vehicle’s survivability can be raised. A thorough discussion of this paradigm is provided, along with a presentation and analysis of the reliability estimations based on an electric vehicle. This research on the reliability design and maintenance of an electric vehicle can be supported by the ideas that are outlined in the paper. Additionally, the findings of this study may be helpful to those who build electric vehicle, especially when upgrading the components efficiency and planning for reliability increase.
基金National High-Tech Research and Development Program(863 Program),China(No.2012AA062001)
文摘In consideration of the uncertainty of basic events failure rate and lack of probability statistical information in fault tree analysis( FTA) of excavator variable-frequency speed control system, the interval theory was employed and combined with conventional FTA method. The basic events failure probabilities were described by interval numbers,and the interval operators of logical gates in FTA were deduced based on interval theory. Finally,the reliability assessment of excavator variable-frequency speed control system was done by interval FTA method. The result shows that the interval FTA method is suitable for the complex system with insufficient failure data.
基金National Science and Technology Major Project of China(No.2013ZX04013-011)
文摘CNC machine tool is a large complex system which contains both mechanical and electrical components.As one of these components,the spindle is crucial for the performance of CNC machine tool.To improve the quality of CNC machine,the reliability of spindle was evaluated in this paper using a fault tree analysis(FTA)method.The FTA method is a set of calculation methods based on Boolean algebra.However,it is difficult to analyze a large and complex fault tree with inaccurate results and low efficiency as well as the complexity of time and space.Both of them will result in the so-called "combinatorial explosion".To overcome this problem,the analysis method based on binary decision diagram(BDD)was introduced in our works,and a sorting method about bottom events was also recommended which can reduce the size of the BDD effectively.
基金Supported by the Science and Technology Plan Project of Liaoning Province,China(2019JH8/10300102)。
文摘In view of the environmental and safety risks of hazardous chemical explosions in chemical enterprises,the fault tree analysis was used to establish a fault tree model of hazardous chemical explosions and comprehensively analyze the possibility of the explosions.The 34 basic events that caused hazardous chemical explosions were expounded,and the minimum cut and path sets were obtained.The structure importance of basic events were calculated.According to the minimum path sets,the basic events when the accident does not occur were determined,and combined with the sequence of structure importance,the preventive measures for hazardous chemical explosion accidents were proposed.The fault tree model intuitively clarified the correlation between the direct causes of hazardous chemical explosion accidents,and proposed directions for effectively reducing the probability of hazardous chemical explosion accidents in the chemical industry.
基金supported by the National Natural Science Foundation of China (Nos.51504008,71371014,and 51774012)the Natural Science Foundation of Anhui Higher Education Institutions of China (No.KJ2015A068)+3 种基金the Anhui Provincial Natural Science Foundation (No.1608085QE115)the China Postdoctoral Science Foundation funded project (Nos.2015M571913 and 2018T110612)the Postdoctoral Fund of Anhui Province (No.2017B212)the Scientific Research Foundation for Introduction of Talent of Anhui University of Science & Technology (No.ZY530)
文摘During the past decade, coal dust and gas explosions have been the most two serious types of disasters in China, threatening the lives of miners and causing significant losses in terms of national property. In this paper, an evaluation model of coal dust and gas explosions was constructed based on a fuzzy fault tree by taking the Xingli Coal Mine as a research site to identify the risk factors of coal dust and gas explosions.Furthermore, the hazards associated with such explosions were evaluated for this particular coal mine.After completing an on-site investigation, the fuzzy probabilities of basic events were obtained through expert scoring, and these expert opinions were then aggregated as trapezoidal fuzzy numbers to calculate the degrees of importance of all basic events. Finally, these degrees of importance were sorted. According to the resulting order, the basic events with higher probabilities were determined to identify key hazards in the daily safety management of this particular coal mine. Moreover, effective measures for preventing gas and coal dust explosions were derived. The fuzzy fault tree analysis method is of high significance in the analysis of accidental coal mine explosions and provides theoretical guidance for improving the efficiency of coal mine safety management in a scientific and feasible manner.
文摘By using the fault tree analysis in reliability theory as the systematical analysis approach, the dust suppression mechanism in a spray system with wetting agent is shown in a logic tree and some graphical models. From these diagrams, all factors related to the spray system and their cause and effect relationship can be seen clearly. Based on the built logic tree, several mathematical models and new ideas for expressing the dust suppressing efficiency in the spray system are put forward. The significance of all factors related to the efficiency of suppressing dust is qualitatively described. Furthermore, the new concepts, such as, the effective reaction time between dust particle and droplet, the expansion phenomenon of laden dust droplet, the functions of volatile and the relative size distribution efficiency of wetting agent are presented. All this richenes the existing mechanism of dust abatement by spraying wetting agent. At last, several problems that need to be further investigated are also suggested in the paper.
文摘The electrical system of CNC machine tool is very complex which involves many uncertain factors and dynamic stochastic characteristics when failure occurs.Therefore,the traditional system reliability analysis method,fault tree analysis(FTA)method,based on static logic and static failure mechanism is no longer applicable for dynamic systems reliability analysis.Dynamic fault tree(DFT)analysis method can solve this problem effectively.In this method,DFT first should be pretreated to get a simplified fault tree(FT);then the FT was modularized to get the independent static subtrees and dynamic subtrees.Binary decision diagram(BDD)analysis method was used to analyze static subtrees,while an approximation algorithm was used to deal with dynamic subtrees.When the scale of each subtree is smaller than the system scale,the analysis efficiency can be improved significantly.At last,the usefulness of this DFT analysis method was proved by applying it to analyzing the reliability of electrical system.
基金Supported by Transformation of Scientific and Technological Achievements Special Fund(No.SBA2015020077)
文摘In recent years, China's increased interest in environmental protection has led to a promotion of energy-efficient dual fuel(diesel/natural gas) ships in Chinese inland rivers. A natural gas as ship fuel may pose dangers of fire and explosion if a gas leak occurs. If explosions or fires occur in the engine rooms of a ship, heavy damage and losses will be incurred. In this paper, a fault tree model is presented that considers both fires and explosions in a dual fuel ship; in this model, dual fuel engine rooms are the top events. All the basic events along with the minimum cut sets are obtained through the analysis.The primary factors that affect accidents involving fires and explosions are determined by calculating the degree of structure importance of the basic events.According to these results, corresponding measures are proposed to ensure and improve the safety and reliability of Chinese inland dual fuel ships.
文摘Reliability allocation is a difficult multi-objective optimization problem. This paper presents a methodology for reliability allocation that can be applied to determine the reliability characteristics of reactor systems or subsystems. The dualistic contrast,known as one of the most powerful tools for optimization problems,is applied to the reliability allocation model of a typical system in this article. And the fault tree analysis,deemed to be one of the effective methods of reliability analysis,is also adopted. Thus a failure rate allocation model based on the fault tree analysis and dualistic contrast is achieved. An application on the emergency diesel generator in the nuclear power plant is given to illustrate the proposed method.
基金Supported by National Science and Technology Pillar Program in the Twelfth Five-Year Plan (No. 2011BAK06B02)National Basic Research Program of China ("973" Program, No. 2012CB026000)
文摘In petrochemical plant, the in-operation repairing is usually a repairing strategy with pressured inoperation repairing for avoiding huge economic losses caused by unplanned shutdown when some slight local leakage happens in pipes. This paper studies the effects of repairing strategies on the failure probability of the pipe systems in process industries based on the time-average fault tree approach, especially the in-operation repairing strategies including pressured in-operation repairing activities. The fault tree model can predict the effect of different repairing plans on the pipe failure probability, which is significant to the optimization of the repairing plans. At first pipes are distinguished into four states in this model, i.e., successive state, flaw state, leakage state and failure state. Then the fault tree approach, which is usually applied in the studies of dynamic equipment, is adopted to model the pipe failure. Moreover, the effect of pressured in-operation repairing is also considered in the model. In addition, this paper proposes a series of time-average parameters of the fault tree model, all of which are used to calculate node parameters of the fault tree model. At last, a practical case is calculated based on the fault tree model in a repairing activity of pipe thinning.
文摘Conventional fault tree and reliability analysis do not reflect the characteristics of basic events as non stationary and ergodic process. To overcome these drawbacks, theory of fuzzy sets is employed to run fault tree analysis(FTA) of roller oscillating tooth gear drive(ROTGD), the relative frequencies of basic events are considered as symmetrical normal fuzzy numbers, from the logical relationship between different events in the fault tree and fuzzy operators AND and OR, fuzzy probability of top event is solved. Finally, an example is given to demonstrate a real ROTGD system.
基金National Natural Science Foundation of China(No.U1330130)
文摘The explosive logic network( ELN) with two-input-oneoutput was designed with three explosive logic gap null gates. The time window of the output of the ELN was given,after which the dynamic fault tree analysis was implemented. Two dynamic failure modes of the ELN were obtained,and then their own Markov transition processes were established. After that,the probability of failure was calculated from the corresponding state transition diagram. The reliability of the ELN which was in different length of time under the ambient incentive was then analyzed. Based on the above processing,the reliability of the ELN can be improved.
文摘Being one of the most expensive components of an electrical power plant, the failures of a power transformer can result in serious power system issues. So fault diagnosis for power transformer is highly important to ensure an uninterrupted power supply. Due to information transmission mistakes as well as arisen errors while processing data in surveying and monitoring state information of transformer, uncertain and incomplete information may be produced. Based on these points, this paper presents an intelligent fault diagnosis method of power transformer using fuzzy fault tree analysis (FTA) and beta distribution for failure possibility estimation. By using the technique we proposed herein, the continuous attribute values are transformed into the fuzzy numbers to give a realistic estimate of failure possibility of a basic event in FTA. Further, it explains a new approach based on Euclidean distance between fuzzy numbers, to rank the basic events in accordance with their Fuzzy Importance Index.
文摘The effect of pruning severity on tree growth was analyzed by change point detection using segmented regression. The present study applied this analysis to a well-known published data set including diameter growth response, tree age, pruning severity and pretreatment crown size. First, multiple regression analysis was performed to assess the effect of tree age, pruning severity and pretreatment crown size on diameter growth response. Next, segmented regression analysis was performed to assess the effect of pruning severity on diameter growth response. The results of the multiple regression showed that diameter growth response was significantly influenced by pruning severity and pretreatment crown size. The results of the segmented regression showed that in the whole data set, an abrupt change toward a decrease in diameter growth response was detected at 25% of the live crown removed. However, in the group of fully crowned and open-grown, diameter growth response continuously decreased with increasing pruning severity with no significant abrupt change, whereas in the group of 70% - 90% live crown, diameter growth response did not significantly decrease up to the break point (53% crown removed) and then abruptly decreased. This may be the first study to show the numerical evaluation of the effect of pruning severity on tree growth by change point analysis.
文摘In recent decades, Urban Heat Island Effects have become more pronounced and more widely examined. Despite great technological advances, our current societies still experience great spatial disparity in urban forest access. Urban Heat Island Effects are measurable phenomenon that are being experienced by the world’s most urbanized areas, including increased summer high temperatures and lower evapotranspiration from having impervious surfaces instead of vegetation and trees. Tree canopy cover is our natural mitigation tool that absorbs sunlight for photosynthesis, protects humans from incoming radiation, and releases cooling moisture into the air. Unfortunately, urban areas typically have low levels of vegetation. Vulnerable urban communities are lower-income areas of inner cities with less access to heat protection like air conditioners. This study uses mean evapotranspiration levels to assess the variability of urban heat island effects across the state of Tennessee. Results show that increased developed land surface cover in Tennessee creates measurable changes in atmospheric evapotranspiration. As a result, the mean evapotranspiration levels in areas with less tree vegetation are significantly lower than the surrounding forested areas. Central areas of urban cities in Tennessee had lower mean evapotranspiration recordings than surrounding areas with less development. This work demonstrates the need for increased tree canopy coverage.